Ränikarbiidist (karborundum) klaasplaat kleepub väga hästi enamiku trükiplastide külge ja on ka hea soojusülekandega. Trükitud tooted tulevad tavaliselt kergesti ja puhtalt mahaEnder-3 seeria printerite jaoksSuurus: 235mm x 235mm Kirjeldus on tõlgitud automaatse tõlke abil. Kui märkate mingeid erinevusi, palun teavitage meid e-posti teel
eSun PLA-Basic 1.75mm 1kg Grey filament - hall eSun on tuntud bränd 3D printerite kasutajate ja tootjate seas. Oma tegevust alustas eSun juba aastal 2007. Tehnilised andmed: Kaal: 1KG/Spool Diameeter: 1.75MM Printimise temperatuur: 210-230℃ Soojendatava aluse temperatuur: Ilma soojenduseta / 45-60℃ Soovitatav printimise kiirus: 40-300mm/s Tõmbetugevus (MPa): 20-30 Pikenemine purunemisel (%): 5-10 Paindetugevus (MPa): 101.2 Paindemoodul (MPa): 3111.8 IZOD (KJ/M2): 3.09
With the Creality filament cutter, you can cut your filament quickly and precisely - for uninterrupted and smooth multi-colour printing. Made from high-strength materials, the cutter impresses with its exceptional wear resistance and stability. This means it remains sharp and reliable even with frequent use. Thanks to the sophisticated design, the cutting module can be replaced in just a few simple steps - quickly, easily and without special tools.
PLA Anycubic Filament 1 KG (White)Discover PLA Anycubic filament - the perfect combination of precision and environmental care. The carefully wound spool eliminates tangles, and the stable ± 0.02 mm diameter guarantees extremely accurate prints. The biodegradable material, created from lactic acid, is nature-friendly, while the separately available Color Engine Pro intelligent system with RFID (Radio-frequency Identification, a technology for wireless identification of objects using radio waves) will automatically select the optimal print settings, simplifying the entire process and minimizing waste. In addition, semi-transparent CMYK (Cyan, Magenta, Yellow, Black - a set of four primary colors) technology allows you to create full-color, striking 3D models. Give your prints new life and choose Anycubic today!Precision you can count onAnycubic filament features an extremely durable diameter with a tolerance of ± 0.02 mm, which means that every print will be reproduced with the highest accuracy. Details are sharp, surfaces are smooth, and combined with ultra-high color consistency, you'll get excellent aesthetic and mechanical results. Each roll of Anycubic filament has been wound with special care, so you avoid the frustration of tangled filament. Even winding eliminates the risk of jams and print breaks, and the absence of air bubbles guarantees a smooth, uninterrupted 3D printing process.With the environment in mindAnycubic filament is made from lactic acid, obtained during the fermentation of corn starch (or other plants) by wet milling. It is a biodegradable material that is fully nature-friendly.Smart printingThanks to RFID technology, the Anycubic Color Engine Pro system (available outside the kit) automatically recognizes the type of filament and optimizes printer settings. Forget about tedious calibrations, simply load the filament and the printer will adjust the temperature, speed and retraction on its own, minimizing material waste and guaranteeing perfect results on every job. Remember to heat the print head above 230°C before installing or replacing the filament. This will avoid the risk of nozzle clogging and ensure continuous operation. Compatibility with all FDM (Fused Deposition Modeling, belongs to the group of incremental techniques whose characteristic is extrusion of material from print heads) printers available on the market makes PLA Anycubic a versatile and reliable solution for any 3D printing enthusiast.Experiments with translucent CMYKTranslucent CMYK filament uses four primary colors (cyan, magenta, yellow, black) to create as many as one million vibrant hues under light. Overlapping the colors in different ratios produces full-color 3D embossing on printers such as the Kobra 3 Combo, ideal for creating striking transparent models. ManufacturerAnycubicModelIPHPLWH-106ColorWhiteWeight1 kgHardness81DNozzle temperature200-210°C (High speed 3D printer 190-230°C)Tensile strength61 MpaMaterialPLADiameter1.75±0.02mmTotal lengthApproximately 330mHeating table temperature50-60°CDensity1.23/cm³
360° Uniform Heating – Integrated ceramic heating element for rapid and even temperature rise. Quick Disassembly – All-metal design with integrated nozzle and heat break for easy replacement. High heat resistance – Withstands up to 300°C, ideal for a wide range of technical filaments. Precision Manufacturing Quality – Smooth internal walls (Ra 0.4), no jamming, no filament leakage. Premium Materials – Titanium alloy heat break, copper alloy nozzle, and SKD11 hardened steel (Mohs hardness 7.8). Dedicated for Creality Hi 3D printer
PLA-Silk is a durable and easy to use filament characterized by intense color and exceptional gloss. Prints made with the PLA-Silk product line filament have an eye-catching luminous surface. Application decorations elements of interior design, luminous sculptures, toys, figurines gadgets (e.g. pendants, key rings) PLA Silk is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. Recommended printing parameters: extrusion temperature 185-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. Printable model for refill spool sides you can download here: PRODUCT PARAMETERS Color: silk silver Diameter: 1.75 mm Weight: 1000 g (vacuum packed) (refill packing (without plastic spool) Density: 1.24 g/cm3 Odor: odorless Heat deformation temperature: 55°C (ASTM E2092) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,05 Tensile elongation: 6 % Tensile strength (to break): 53 MPa
PLA Starter filament by Rosa3D was created for beginners of 3D printing. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors.PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product. Printable model for refill spool sides you can download here:Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: greenDiameter: 1.75 mmWeight: 1000 g (vacuum packed)Density: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa
Filament 3D ReFill PET-G Magic Army is a three-color 3D filament inspired by military camouflage colors. Through the coextrusion process, it combines three colors (dark green, sandy beige, and brown) into a single strand, creating unique “magical” visual effects. The best results are achieved with prints featuring complex structures and intricate details. The material features low shrinkage, no odor, excellent layer adhesion, and precise detail reproduction. Printable model for refill spool sides you can download here: Recommended printing parameters: extrusion temperature 220-250°C bed temperature: 60-80°C fan: 0-60% PRODUCT PARAMETERS Color: brown / green / beige Diameter: 1.75 mm Weight: 1000 g (vacuum packed) Odor: odorless
PET-G (poly(ethylene terephthalate) with addition of glycol) is a material that is easy to print, has high transparency and is odourless. Applications: prototyping, large-format printing, lampshades/enclosures. PET-G Standard filament from ROSA3D is characterised by an ease of printing comparable to PLA. It is dedicated for users who deal with amateur and professional 3D printing. Details made from PET-G Standard are feature precise details, good adhesion to the bed, no odour and a low level of shrinkage. Prints made from PET-G Standard are distinguished by their high chemical resistance. They can be subjected to sandblasting, drilling, sawing, grinding, cutting and painting without compromising the structural integrity of the component. PET-G Standard filament was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product. Recommended printing parameters extrusion temperature 220-250°C bed temperature: 60-80°C fan: 0-60% Printable model for refill spool sides you can download here: Recommended printing parameters: extrusion temperature 185-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. PRODUCT PARAMETERS Color: army green Diameter: 1.75 mm Weight: 1000 g (vacuum packed) Density: 1.29 g/cm3 Odor: odourless Heat distortion temperature: 78°C (ISO 306) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,02 Tensile elongation: 6 % Tensile strength (to break): 20 MPa
ROSA-Flex 96A is a thermoplastic polyurethane (TPU). It is intended for intermediate users of 3D printers who want to start their adventure with printing from flexible materials. The ROSA-Flex 96A filament is hard enough to be printed even on printers with Bowden feeding. In addition, it does not require a closed chamber and will easily stick to many work surfaces (eg. glass, smooth PEI, textured PEI, alluminum). ROSA-Flex 96A has excellent interlayer adhesion. Filament made of TPU will be perfect if you need elements resistant to chemical reagents and mechanical damage. Prints can be squeezed and stretched many times without permanently changing their original shape. You can print use it to print a protective case for your smartphone in one of the many vivid colors. ROSA-Flex 96A is a durable technical material, resistant to oils, greases and many solvents. What's more, ROSA-Flex 96A filament was made of components approved for contact with food, complying with FDA 21CFR177.2600 and the amendment of the Commission (EU) 10/2011. For products that come into contact with food, the certification lies with the manufacturer of the final product. APPLICATIONHobby: smartphone cases, drone elements, elements for RC carsTechnical: gaskets, bumpers, anti-vibration dampers / feet, housings, orthoses HOW TO PRINTRecommended printing temperature 220-250°CRecommended bed temperature: 30-60°CRecommended cooling:50-100% (depends on the geometry of the model)Recommended print speed: 15-50 mm/s (we recommend starting slowly and gradually trying to increase the speed)Compatible bed materials: glass, smooth PEI, textured PEI, alluminum. TECHNICAL PARAMETERSDiameter 1.75 mmDiameter tolerance +/- 0.05 mmOval tolerance +/- 0.02 mmNet weight 500 gPrint temperature 220-250 °CBed temperature 30-60 °C HYSICAL PARAMETERSDensity 1,22 g/cm3Odor OdorlessTensile elongation 350 % (EN 12803)Vicat softening point 126°C (ISO 306)
