Silicon Carbide (Carborundum) glass plate adheres very well to most printing plastics, and also has good heat transfer. Printed products usually come off easily and cleanlyFor CR-6SE printersSize: 245mm x 255mm The description was translated using an automatic translator. If you notice any discrepancies, please notify us by email: aprasymai@lemona.lt.
Made of non-stick silicone materialProvides insulation to maintain stable printing temperatures.Protects the heater block from filament oozing.Compatible with Ender 3 S1 (Sprite Direct Drive) for a precise fit.Enhances the longevity and performance of your 3D printer.Supported Printers: (Stock hotend)Ender-3 S1 PlusEnder-3 S1Ender-3 S1 ProSermoon V2CR-200B ProSermoon V1/V1 ProDimmensions 23.1×19.1×17.05 mm
Keep your Creality K2 Plus 3D printer clean and operating at peak performance with these Original Mouth Wipe Strips (Model: 4004010266). Designed to wipe excess filament from the nozzle during auto-cleaning routines, these strips help prevent clogs, print defects, and nozzle buildup—ensuring consistent extrusion and smoother first layers. These are genuine Creality replacement parts, made from durable materials for long-lasting use and seamless compatibility with the K2 Plus toolhead cleaning system
Fan type 4020 Voltage 24V, 6000rpm, cable lenght L150mm Easy replacementEfficient heat dissipationSilent and low noise Motherboard: Ender-6_CR-5 Pro H(CT-380)_CR-5 Pro_CR-X_CR-X Pro_CR-10S Pro V2Hotend: CR-10 Max_CR-2020_CR20 Pro_CR-10S Pro V2_Ender-7_CR-10 Max_CR-10S PRO_Sermoon D1
Anycubic High Speed PLA Filament 1 KG (White).Meet High Speed PLA filament from Anycubic, designed for lightning-fast 3D printing. Thanks to an innovative core optimized for high speeds, the material allows you to print at speeds of up to 500 mm/s, which, combined with a compatible printer, can give you up to ten times the speed of standard designs. Don't sacrifice quality - finished models maintain precise edges and crisp details, even with the most elaborate structures.Smoothness and precision of each layerThe secret to flawless prints is the optimized composition of PLA (polylactide, is one of the most popular materials used for 3D printing), which ensures exceptional smoothness of the filament feed and instant cooling of each applied layer. The filament flows evenly through the nozzle, and rapid solidification prevents deformation. In addition, Anycubic filament guarantees printing precision of ±0.02mm. The result is perfectly smoothed surfaces and sharply rendered parts, even for complex details or shapes.Seamless print runWhen working with Anycubic filament, you don't have to worry about downtime or blockages. The fiber's constant diameter and stable structure guarantee the continuity of the material, eliminating the risk of shortages or clustering inside the print head. This ensures that every print runs smoothly - from the first layer to the last.Versatile compatibilityWhether you're using a modern, high-speed printer or a classic model, Anycubic filament will fit your needs. The uniform, seamless structure with controlled diameter tolerance makes the material completely tangle-resistant and ready to work in any device on the market.Safe useTo maintain consistent quality and avoid possible blockages, be sure to heat the printer head to at least 230 °C before installing the filament. This will ensure that the material will flow without hindrance, giving you peace of mind and smoothness during any, even the most intensive printing. GeneralManufacturerAnycubicModelIPHPLCG-106ColorWhiteMaterialPLADimensions1.75 mmWeight1 kgVolume1.26 g/cm³Elongation at break12%Melting point of the filament165℃Heat distortion temperature56℃Accuracy±0.02mmLength330 mTensile strength54MPaBending strength74MPaIzod impact strength46J/mMelting index4-69/10minStorage environmentDry and ventilated Recommended printer parametersNozzle temperature190-210°C (50-150mm/s) | 210-230°C (150-300mm/s) | 230-260°C (300-600mm/s)Printer platform materialFine magnetic stickerSurface treatment of the printing platformNot requiredPrinter platform temperature50-60°CCooling fan100%Printing speed40-250mm/secPull-in speed50mm/secRecommended materialPVADrying temperature50°C
ELEGOO Mercury Plus 3.0 print washing and drying deviceELEGOO Mercury Plus 3.0 is a practical 2-in-1 device that combines the functions of washing and curing resin models. Thanks to the integrated design, the washing container can be stored directly in the curing module, which saves space and makes the workspace easier to organize. The whole process is now faster and more convenient than ever before!Easy operationAn intuitive touch panel with a digital display allows you to get started in no time. With its help, for example, you can quickly select the mode, set the time and start or stop the desired process.More capacity, more possibilitiesThe new model offers a noticeably larger workspace than the previous generation. The volume of the IPA (Isopropyl Alcohol, isopropyl alcohol) container has increased from 3.5 l to as much as 7.5 l and allows you to wash prints with maximum dimensions of 214 × 135 × 180 mm (with platform) or 230 × 135 × 260 mm (without platform). In addition, the curing area has increased by about 460%, making it possible to process larger models or several prints simultaneously.Flexible operation modesThe device allows you to wash models in two ways - in a suspended position (214 × 135 × 180 mm) or in a corrosion-resistant basket (230 × 135 × 260 mm). This allows you to match the cleaning method to the size and shape of your prints, minimizing the risk of damaging delicate parts.Fast and thorough cleaningPOM (Polyoxymethylene, polyacetal) bearings ensure smooth rotation of the turbine, which speeds up water agitation and increases cleaning efficiency. In addition, the product is equipped with a special seal, so you don't have to worry about leaks.Effective 360° curingThe rotating table evenly exposes the entire surface of the print to UV (ultraviolet) light, and the lower reflective light further enhances this effect. The Fresnel lens used disperses the rays evenly, resulting in better curing of intricate details. The product also offers a special yellow cover that stops ultraviolet radiation with an efficiency of up to 99.9%, which translates into greater safety of use.Effects that are visible to the naked eyeAfter washing and curing, the models are no longer sticky and rough - the surface becomes smooth, clean and noticeably more detailed. This is not only a matter of aesthetics, but also more durable and ready for further processing, such as painting.Compatibility without limitsELEGOO Mercury Plus 3.0 works with most popular 3D printers of the LCD (Liquid Crystal Display), DLP (Digital Light Processing) and MSLA (Masked Stereolithography) types. It's a universal solution that will work regardless of the brand and technology of your equipment. ManufacturerELEGOOModel50.101.059300Washing time range0-30 minutesCuring time range0-30 minutesControl methodTouch buttonsRated power48 WPower supply100-240 V, 50/60 Hz, 24 V, 2 AMaximum size of washing model (with platform)214 × 135 × 180 mm (L × W × H).Maximum size of washing model (without platform)230 × 135 × 260 mm (L × W × H).Maximum curing areaØ250 × 290 mmDevice dimensions302.5 × 302.5 × 412.5 mm (L × W × H).
This build plate from Creality offers a high-quality epoxy resin particle heat-resistant, durable and with a robust sandblasted structure, it is scratch and wear-resistant - ideal for demanding printing projects. Stable adhesion for perfect models Thanks to the ultra-high adhesion, your prints remain stable even under challenging conditions. Whether at high or low temperatures - warping is a thing of the past. High precision and easy removal The elastic spring steel plate ensures perfect flatness and can be easily bent after printing to remove models easily and safely. Even after frequent use, it remains deformation-free and retains its reliability. More features: With the dual-grip and dual-positioning system, the plate can be attached in no time at all, Rounded corners prevent injuries and ensure comfortable handling. Size 280x265mm Dedicated for Creality Hi 3D printers, but can be used with other models where is used same dimmensions beds
Shock-absorbing Silicone Pad-Strong Flexibility,Shock-absorbing and Noise-reducing,Stable Adsorption Strong Flexibility-Made of high-quality silicone with excellent elasticity and toughness, it resists breaking under heavy pressure. Shock Absorption and Noise Reduction-The pad effectively reduces noise from printer vibrations, maintaining a quiet and creative environment." Strong Adsorption, More Stable-The suction cup design firmly secures the machine in place, effectively preventing it from shifting during high-speed movements." Dedicated for K1_K1 Max_K1C_K1 SE_Ender-3 V3_Ender-3 V3 Plus_Creality Hi
Thanks to the high fluidity and fast cooling formula, Hyper Series PLA supports up to 600mm/s print speed. High fluidity provides sufficient melting and extrusion, while rapid cooling provides fast shaping for high-speed printing. Easy filament identification for Creality printers and CFS deices with RFID identification option High Precision High stability ensures small changes in thermal expansion and cold contraction even when printing at high speeds, bringing high precision in dimensions and better results. Higher Toughness With higher tensile strength than ABS and higher toughness than traditional PLA, Hyper Series PLA brings better structural bearing capacity to the printed models. Application: Prototyping Figurines Machine parts Mass production Specifications: Wire diameter: 1.75±0.03mm Density 1.25g/cm3 Tensile strenght (X-Y) 52.991 Mpa Tensile modulus (X-Y) 1146.064 Elogation at break 6.3% Bending streght (X-Y) 92.3Mpa Printing temperatue 190-230 ºC Printing speed 30-600mm/s
PLA Starter filament by Rosa3D was created for beginners of 3D printing. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors. PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product. Printable model for refill spool sides you can download here: Recommended printing parameters: extrusion temperature 185-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. PRODUCT PARAMETERS Color: Army green Diameter: 1.75 mm Weight: 1000 g (vacuum packed) refill packing without plastic spool Density: 1.24 g/cm3 Odor: odorless Heat deformation temperature: 55°C (ASTM E2092) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,05 Tensile elongation: 6 % Tensile strength (to break): 53 MPa
Filament for 3D printersPLA is a biodegradable plastic with a shiny surface and it is available in different colours.- good compatibility and biodegradability- environment-friendly materialPrintimise materjalPolülaktiid (PLA)PrintimisvärvidHallBrändiühilduvusVellemanÜhilduvusK8400Kaal1 kg
