AnyCubic ABS-Like Resin 2 Pro (Gray)The new formulation of AnyCubic ABS-Like Resin Pro 2 offers exceptional tensile strength and flexibility, increasing elongation at break by more than 100% compared to the previous version. These results make it ideal for printing high-strength components such as structural components, industrial prototypes and even fittings. The resin is also distinguished by its high durability, color saturation and low odor, making it comfortable to work with even in poorly ventilated areas.Increased durabilityABS-Like Resin Pro 2 features increased bending resistance, making it more resistant to cracking and mechanical damage. It is also easy to work with, allowing for precise molding of complex models and details.High precision and minimal shrinkageThanks to reduced shrinkage, the resin ensures high precision and retains sharp details during printing. Modeling shrinkage is much lower than with other resins, minimizing the risk of distortion.Wide compatibilityThe resin is compatible with a wide range of 3D printers operating in the UV wavelength range from 365 to 405 nm. This makes it easy to integrate with most DLP and LCD printers on the market. AnyCubic 2 Pro is also user- and environment-friendly - it provides a comfortable working environment as it does not emit an intense odor.High fluidity and lower viscosityThe resin's low viscosity leads to shorter curing times and makes it easier to form models, which promotes a faster and more efficient printing process. Improved adhesion to the printing platform effectively reduces the risk of printing failures. Enjoy greater precision and even better productivity in your work with AnyCubic! ManufacturerAnyCubicModel2ProUV wavelength:365-405 nmDensity:1.05-1.25 g/cm³Viscosity:300-400 cPimPa-sHardness:82-84DTensile strength:35-40 MPaElongation at break:35-40%Shrinkage formability:4.3-5.6%Bending strength:35-40 MPaFlexural modulus:1400-1800 MPaHeat resistance temperature:60-65°CResin washing:AlcoholShelf life:1.5 years
Plate surface is not easy to get scratched or damaged. Ultra-high Adhesion, More Stable Molding Exceptional Flatness Easy Model Removal Applicable to most materials such as PLA,ABS,ASA,PETG,TPU,PC,PA etc. Dedicated for Creality K2plus 3D printer, but works for most of 3D printers where used 370x370mm printing bed * This is not the original version as the one on K2P printer. No clean nozzle design in non-printing area which doesn't affect your printing.
Anycubic High Speed PLA Filament 1 KG (Black).Meet High Speed PLA filament from Anycubic, designed for lightning-fast 3D printing. Thanks to an innovative core optimized for high speeds, the material allows you to print at speeds of up to 500 mm/s, which, when combined with a compatible printer, can give you up to ten times the speed of standard designs. Don't sacrifice quality - finished models maintain precise edges and crisp details, even with the most elaborate structures.Smoothness and precision of each layerThe secret to flawless prints is the optimized composition of PLA (polylactide, is one of the most popular materials used for 3D printing), which ensures exceptional smoothness of the filament feed and instant cooling of each applied layer. The filament flows evenly through the nozzle, and rapid solidification prevents deformation. In addition, Anycubic filament guarantees printing precision of ±0.02mm. The result is perfectly smoothed surfaces and sharply rendered parts, even for complex details or shapes.Seamless print runWhen working with Anycubic filament, you don't have to worry about downtime or blockages. The fiber's constant diameter and stable structure guarantee the continuity of the material, eliminating the risk of shortages or clustering inside the print head. This ensures that every print runs smoothly - from the first layer to the last.Versatile compatibilityWhether you're using a modern, high-speed printer or a classic model, Anycubic filament will fit your needs. The uniform, seamless structure with controlled diameter tolerance makes the material completely tangle-resistant and ready to work in any device on the market.Safe useTo maintain consistent quality and avoid possible blockages, remember to heat the printer head to at least 230 °C before installing the filament. This will ensure that the material will flow without hindrance, giving you peace of mind and smoothness during any, even the most intensive printing. GeneralManufacturerAnycubicModelIPHHSBW-106ColorBlackMaterialPLADimensions1.75 mmWeight1 kgVolume1.26 g/cm³Elongation at break12%Melting point of the filament165℃Heat distortion temperature56℃Accuracy±0.02mmLength330 mTensile strength54MPaBending strength74MPaIzod impact strength46J/mMelting index4-69/10minStorage environmentDry and ventilated Recommended printer parametersNozzle temperature190-210°C (50-150mm/s) | 210-230°C (150-300mm/s) | 230-260°C (300-600mm/s)Printer platform materialFine magnetic stickerSurface treatment of the printing platformNot requiredPrinter platform temperature50-60°CCooling fan100%Printing speed40-250mm/secPull-in speed50mm/secRecommended materialPVADrying temperature50°C
PLA Anycubic Filament 1 KG (White)Discover PLA Anycubic filament - the perfect combination of precision and environmental care. The carefully wound spool eliminates tangles, and the stable ± 0.02 mm diameter guarantees extremely accurate prints. The biodegradable material, created from lactic acid, is nature-friendly, while the separately available Color Engine Pro intelligent system with RFID (Radio-frequency Identification, a technology for wireless identification of objects using radio waves) will automatically select the optimal print settings, simplifying the entire process and minimizing waste. In addition, semi-transparent CMYK (Cyan, Magenta, Yellow, Black - a set of four primary colors) technology allows you to create full-color, striking 3D models. Give your prints new life and choose Anycubic today!Precision you can count onAnycubic filament features an extremely durable diameter with a tolerance of ± 0.02 mm, which means that every print will be reproduced with the highest accuracy. Details are sharp, surfaces are smooth, and combined with ultra-high color consistency, you'll get excellent aesthetic and mechanical results. Each roll of Anycubic filament has been wound with special care, so you avoid the frustration of tangled filament. Even winding eliminates the risk of jams and print breaks, and the absence of air bubbles guarantees a smooth, uninterrupted 3D printing process.With the environment in mindAnycubic filament is made from lactic acid, obtained during the fermentation of corn starch (or other plants) by wet milling. It is a biodegradable material that is fully nature-friendly.Smart printingThanks to RFID technology, the Anycubic Color Engine Pro system (available outside the kit) automatically recognizes the type of filament and optimizes printer settings. Forget about tedious calibrations, simply load the filament and the printer will adjust the temperature, speed and retraction on its own, minimizing material waste and guaranteeing perfect results on every job. Remember to heat the print head above 230°C before installing or replacing the filament. This will avoid the risk of nozzle clogging and ensure continuous operation. Compatibility with all FDM (Fused Deposition Modeling, belongs to the group of incremental techniques whose characteristic is extrusion of material from print heads) printers available on the market makes PLA Anycubic a versatile and reliable solution for any 3D printing enthusiast.Experiments with translucent CMYKTranslucent CMYK filament uses four primary colors (cyan, magenta, yellow, black) to create as many as one million vibrant hues under light. Overlapping the colors in different ratios produces full-color 3D embossing on printers such as the Kobra 3 Combo, ideal for creating striking transparent models. ManufacturerAnycubicModelIPHPLWH-106ColorWhiteWeight1 kgHardness81DNozzle temperature200-210°C (High speed 3D printer 190-230°C)Tensile strength61 MpaMaterialPLADiameter1.75±0.02mmTotal lengthApproximately 330mHeating table temperature50-60°CDensity1.23/cm³
PLA Anycubic 1 KG (Peach Fuzz) Filament.PLA Anycubic filament combines precision and environmental protection. With perfect, clean winding, each spool guarantees a smooth, uninterrupted printing process, and a uniform diameter with a tolerance of ±0.02 mm eliminates air bubbles and the risk of nozzle clogging. Color remains intense from the first layer to the last, and biodegradable PLA (polylactide, is one of the most popular materials used for 3D printing) from naturally grown corn is a conscious planet-friendly choice. In addition, a built-in RFiD (Radio-Frequency Identification, a technology for wireless identification of objects using radio waves) chip automatically optimizes the printer's parameters, ensuring perfect results without the need for manual calibration. With Anycubic, every project will gain brilliance and top quality.Perfect winding without tanglesAnycubic's filament spool is designed to ensure perfect material winding. Thanks to the precise control of the filament tension, you don't have to worry about jams or unexpected interruptions. Every meter of Anycubic filament extends smoothly and without interference, resulting in a stable and uninterrupted printing process.Perfect precision and color uniformityThe filament maintains a uniform diameter with a tolerance of +0.02 mm, which guarantees no air bubbles and completely eliminates the risk of nozzle clogging. Each layer of the print looks even and smooth and the color remains intense and consistent from the beginning to the end of the project.Environmentally friendly materialThe PLA used in Anycubic's filament is made from lactic acid created by fermenting corn starch or other plants. Thanks to its biodegradable nature, it is friendly to the planet and completely safe to use. By choosing Anycubic you not only care about the quality of your prints, but also the environment.Smart settings with RFiD technologyAn RFiD chip built into the spooler works with the Anycubic Color Engine Pro to automatically recognize the type of filament and adjust printer parameters. Print settings are optimized non-invasively, allowing you to achieve the best results without having to manually calibrate the device. ManufacturerAnycubicModelIPHPL17-106MaterialPLADimensions1.75±0.02mmTotal length330 mWeight1 kgHardness81DNozzle temperature200-210℃Heating table temperature50-60℃Tensile strength61 MpaVolume1.23g/cm³ColorPeach Fuzz
PLA Anycubic Filament 1 KG (Interstellar Violet)Anycubic PLA Filament combines precision and environmental protection. With perfect, clean winding, each spool guarantees a smooth, uninterrupted printing process, and a uniform diameter with a tolerance of ±0.02 mm eliminates air bubbles and the risk of nozzle clogging. Color remains intense from the first layer to the last, and biodegradable PLA from naturally grown corn is a conscious planet-friendly choice. In addition, the built-in RFiD chip automatically optimizes the printer's parameters, ensuring perfect results without the need for manual calibration. With Anycubic, every project will gain brilliance and top quality.Perfect winding without tanglesAnycubic's filament spool is designed to ensure perfect material winding. Thanks to the precise control of the filament tension, you don't have to worry about jams or unexpected interruptions. Every meter of Anycubic filament extends smoothly and without interference, resulting in a stable and uninterrupted printing process.Perfect precision and color uniformityThe filament maintains a uniform diameter with a tolerance of +0.02 mm, which guarantees no air bubbles and completely eliminates the risk of nozzle clogging. Each layer of the print looks even and smooth and the color remains intense and consistent from the beginning to the end of the project.Environmentally friendly materialThe PLA used in Anycubic's filament is made from lactic acid created by fermenting corn starch or other plants. Thanks to its biodegradable nature, it is friendly to the planet and completely safe to use. By choosing Anycubic you not only care about the quality of your prints, but also the environment.Smart settings with RFiD technologyThe spooler's built-in RFiD chip works with the separately available Anycubic Color Engine Pro module to automatically recognize the type of filament and adjust printer parameters. Print settings are optimized non-intrusively, allowing you to achieve the best results without having to manually calibrate the device. ManufacturerAnycubicModelIPHPL16-106MaterialPLADimensions1.75±0.02mmTotal length330 mWeight1 kgHardness81DNozzle temperature200-210℃Heating table temperature50-60℃Tensile strength61 MpaVolume1.23g/cm³ColorPurple (Interstellar Violet)
Important Information – K1 Series CFS Upgrade Compatibility The K1 Series CFS Upgrade is only compatible with K1 models equipped with the integrated Unicorn hotend. Please note that this upgrade kit is not compatible with older versions of the hotend. If the user wishes to install the CFS Upgrade on an older K1 unit, both the hotend and heatsink must be upgraded to the Unicorn version. Compatibility Details All K1 Series machines shipped after 2024 come with the Unicorn hotend pre-installed and are fully compatible with the CFS Upgrade. Machines shipped before 2024 will require an upgrade to the Unicorn hotend in order to use this kit. How to check your machine's production date You can determine when your machine was shipped by checking the serial number (SN). Please refer to the reference photo below for guidance. Smart features for a hassle-free experience The built-in filament cutter ensures precise filament switching, while the run-out sensor prevents interruptions mid-print. RFID detection helps the system recognize the filaments you’re using, making management easier. Flexible connectivity and updates With support for Wi-Fi and LAN, you can send print jobs wirelessly. Updates can be installed via USB or OTA, so you always have access to the latest features. The CFS Upgrade Accessory Kit is a simple way to expand your 3D printing capabilities—without making the process more complicated. Multi-color printing made simple Each CFS unit holds four filaments, and you can connect up to four units for a total of 16 colors. The system automatically handles filament changes, ensuring smooth transitions between colors. Please note that each CFS unit is sold separately, and multiple units are required to reach the maximum number of colors.
The PLA Starter filament by Rosa3D was designed for beginner users of 3D printers. The seamless printing with our PLA Starter will let you print more and more complicated and challenging projects. PLA Starter is characterized by low moulding shrinkage and a lack of unpleasant smell. PLA Starter printouts are also characterised by very strong adhesion of layers and high quality reproduction of details. The filament is made of biodegradable biopolimer. It is manufactured from food-grade elements. However, in case of products that come into contact with food, certification lies with the manufacturer of the final product. APPLICATION- decorations (e.g. interior design elements, such as lamp shades or vases)- toys (e.g. figurines)- gadgets (e.g. key rings, pendants)- prototypes HOW TO PRINTRecommended printing temperature 190-225°CRecommended table temperature: 40-60°CRecommended cooling: 70-100% TECHNICAL PARAMETERSDiameter 1.75 mmDiameter tolerance +/- 0,05Oval tolerance +/- 0,02Net weight 1000gPrint temperature 190-225 °CBed temperature 40-60 °C PHYSICAL PARAMETERSDensity 1.24 g/cm3Odor OdorlessTensile elongation 6 %Tensile strength (to break) 53 MPaTensile modulus 3500 MPaThermal deformation temperature 55 °C Printable model for refill spool sides you can download here:
PLA-Silk is a durable and easy to use filament characterized by intense color and exceptional gloss. Prints made with the PLA-Silk product line filament have an eye-catching luminous surface.Applicationdecorationselements of interior design, luminous sculptures,toys, figurinesgadgets (e.g. pendants, key rings)PLA Silk is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. Printable model for refill spool sides you can download here:PRODUCT PARAMETERSColor: silk steelDiameter: 1.75 mmWeight: 1000 g (vacuum packed) (refill packing (without plastic spool)Density: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa
Creality Hyper PLA Filament (Green)Creality's Hyper PLA filament stands out for its fast cooling and durability, while providing excellent precision. It's made of high-quality materials and is fantastic for a variety of applications - from creating figurines to device parts to prototypes. It allows fast, accurate printing and doesn't get tangled. It is ideal for use in conjunction with Creality printers. Users can also take advantage of the Creality Cloud service, which offers, among other things, plenty of free models for printing.Even faster printingThanks to its high fluidity and fast cooling, the filament enables printing speeds of up to 600 mm/s. In addition, the excellent stability ensures greater precision and produces better results. However, it doesn't stop there. Reliable control of the filament diameter and automatic winding system guarantee smoother printing and minimize the risk of tangling.DurabilityThe filament is distinguished by its high tensile strength (52.99 MPa) and bending strength (92.38 MPa), making the printed models more durable. Top-quality materials were used in its manufacture, and it underwent rigorous quality control. All this allows you to enjoy fantastic printing performance and excellent results.IncludedSpool with filamentDrying agentVacuum packaging ManufacturerCrealityNameHyper Series PLAModel3301010380ColorGreenDiameter1.75 mm ± 0.3 mmWeight1 kgPrinting temperatureFrom 190°C to 230°CTable temperatureFrom 25°C to 60°CPrinting speed30-600 mm/secFan100%Density1.25 g/cm3Tensile strength (X-Y)52.88 MpaModulus of elasticity (X-Y)1146,064Elongation at break6,304%Flexural strength (X-Y)92.38 MpaFlexural modulus (X-Y)2490.178 MpaCharpy impact strength (X-Y)8.8344 kJ/m2Printing platformCarbon silicon, PEI board, textured paper, PVP adhesive
Build plate with premium PEI powder coating, dedicated for K1 Max Can be used with other 3D printers with 315*310mm printing platform Excellent Heat Resistance Easy Model Removal High Strength & Wear Resistance
Gembird's 1.75 mm PLA filament is designed for reliable and efficient 3D printing, perfect for both beginners and experienced users. With a spool diameter of 19.8 cm and a weight of 1 kg, this filament provides a length of 330 m for extended printing sessions. The melting temperature of 210°C ensures compatibility with most fused filament fabrication printers, making it a versatile choice for various projects. Compliant with RoHS and REACH standards, this filament emphasizes safety and environmental considerations.
AnyCubic Standard Resin (Gray)AnyCubic standard resin is distinguished by its excellent adhesion and durability. It is perfect even for novice users. It allows impressive printing speed and unmatched precision - great for highly detailed models. At the same time, it is very easy to clean.Exceptional durabilityBet on the perfect combination of strength and resilience. AnyCubic standard resin is distinguished by its hardness of about 85 HS, bending strength of 50-60 MPa and flexibility reaching 1400-1600 MPa. Its cleaning will also not cause you any problems. Using it, you also don't have to worry about unpleasant odors.Incredible precisionNow you can easily take care of even the smallest detail. The resin provides a casting precision of ± 0.2 mm - or you can control it within ± 0.1 mm, depending on the type of device you use. This makes it easy to print high-quality, detail-rich models!Fast printingDon't waste time on prolonged waiting for your model to be printed. The resin is distinguished by its excellent fluidity, so it dissolves quickly and allows you to shorten the printing process. Now your prints will be ready in no time!Wide compatibilityForget about compatibility problems. AnyCubic standard resin fits most popular LCD and DLP 3D printers. So you can create detailed prints no matter what equipment you have! ManufacturerAnyCubicModelSPTGY-104EColorGrayWavelength365-405 nmDensity1.13 g/cm3Viscosity200-230 cP / mPa⋅sSurface hardness84-86 HSTensile strength40-50 MPaMax. elongation to break12-16%Shrinkage4,5-5,5%Bending strength50-60 MPaFlexibility1400-1600 MPaMaintenance period18 monthsWeight1 kg
AnyCubic ABS-Like Resin 2 Pro (Black)The new formulation of AnyCubic ABS-Like Resin Pro 2 offers exceptional tensile strength and flexibility, increasing elongation at break by more than 100% compared to the previous version. These results make it ideal for printing high-strength components such as structural components, industrial prototypes and even fittings. The resin is also distinguished by its high durability, color saturation and low odor, making it comfortable to work with even in poorly ventilated areas.Increased durabilityABS-Like Resin Pro 2 features increased bending resistance, making it more resistant to cracking and mechanical damage. It is also easy to work with, allowing for precise molding of complex models and details.High precision and minimal shrinkageThanks to reduced shrinkage, the resin ensures high precision and retains sharp details during printing. Modeling shrinkage is much lower than with other resins, minimizing the risk of distortion.Wide compatibilityThe resin is compatible with a wide range of 3D printers operating in the UV wavelength range from 365 to 405 nm. This makes it easy to integrate with most DLP and LCD printers on the market. AnyCubic 2 Pro is also user- and environment-friendly - it provides a comfortable working environment as it does not emit an intense odor.High fluidity and lower viscosityThe resin's low viscosity leads to shorter curing times and makes it easier to form models, which promotes a faster and more efficient printing process. Improved adhesion to the printing platform effectively reduces the risk of printing failures. Enjoy greater precision and even better productivity in your work with AnyCubic! ManufacturerAnyCubicModel2ProColorBlackUV wavelength:365-405 nmDensity:1.05-1.25 g/cm³Viscosity:300-400 cPimPa-sHardness:82-84DTensile strength:35-40 MPaElongation at break:35-40%Shrinkage formability:4.3-5.6%Bending strength:35-40 MPaFlexural modulus:1400-1800 MPaHeat resistance temperature:60-65°CResin washing:AlcoholShelf life:1.5 years
ELEGOO print head kit for OrangeStorm GigaPrint head kit designed for ELEGOO OrangeStorm Giga 3D printers. It provides precise and fast printing. At the same time, it is very simple to assemble. It is an ideal solution for users who need a replacement part or want to expand the capabilities of their printer with an additional print head. ManufacturerELEGOOModel50.204.0103CompatibilityELEGOO OrangeStorm Giga 3D printer
Thanks to the high fluidity and fast cooling formula, Hyper Series PLA supports up to 600mm/s print speed. High fluidity provides sufficient melting and extrusion, while rapid cooling provides fast shaping for high-speed printing. Easy filament identification for Creality printers and CFS deices with RFID identification option High Precision High stability ensures small changes in thermal expansion and cold contraction even when printing at high speeds, bringing high precision in dimensions and better results. Higher Toughness With higher tensile strength than ABS and higher toughness than traditional PLA, Hyper Series PLA brings better structural bearing capacity to the printed models. Application: Prototyping Figurines Machine parts Mass production Specifications: Wire diameter: 1.75±0.03mm Density 1.25g/cm3 Tensile strenght (X-Y) 52.991 Mpa Tensile modulus (X-Y) 1146.064 Elogation at break 6.3% Bending streght (X-Y) 92.3Mpa Printing temperatue 190-230 ºC Printing speed 30-600mm/s
