3D printerid ja tarvikud

Sisaldab AMS Lite'i • Täisautomaatne kalibreerimine • Kiire, täpne ja vaikne printimine • 180 x 180 x 180 mm printimisala • Aktiivne voolukiiruse kompensatsioon

Printeri tüüp:3D pliiats; Printimise tehnoloogia:FFF (Fused Filament Fabrication); Trükimaterjali tüüp:PLA; Ekraan:On

ELEGOO Rapid PLA+ Filament (Black)Elegoo Rapid PLA+ is a 3D printing filament that is extremely durable and resistant to damage. Compared to standard PLA, it has better properties - tensile strength is at least 60 (in standard PLA it is less than 40), and the material is more flexible - it stretches by 19%, while regular PLA reaches only 8%. As a result, prints from this filament are stronger and less prone to damage.Precise printsThe filament is precisely wound on the spool and has a uniform diameter of 1.75 mm with an accuracy of +/- 0.02 mm. This means that there should be no tangling, clogging of the extruder or other technical problems during printing. The material melts quickly and evenly, resulting in better print quality.Speed and protectionElegoo Rapid PLA+ is designed for high-speed printing - printers can operate at speeds of up to 600 mm/sec, which reduces the turnaround time of projects. The entire product is protected by vacuum packaging, which protects the filament from moisture and dust. The package contains 1 kg of material, guaranteeing long-lasting use with the highest quality standards. ManufacturerElegooModelRapid PLA+ColorblackWeight1 kgDiameter1.75 ± 0.02 mm

ELEGOO Rapid PLA+ Filament (White)Elegoo Rapid PLA+ is a 3D printing filament that is extremely durable and resistant to damage. Compared to standard PLA, it has better properties - tensile strength is at least 60 (in standard PLA it is less than 40), and the material is more flexible - it stretches by 19%, while regular PLA reaches only 8%. As a result, prints from this filament are stronger and less prone to damage.Precise printsThe filament is precisely wound on the spool and has a uniform diameter of 1.75 mm with an accuracy of +/- 0.02 mm. This means that there should be no tangling, clogging of the extruder or other technical problems during printing. The material melts quickly and evenly, resulting in better print quality.Speed and protectionElegoo Rapid PLA+ is designed for high-speed printing - printers can operate at speeds of up to 600 mm/sec, which reduces the turnaround time of projects. The entire product is protected by vacuum packaging, which protects the filament from moisture and dust. The package contains 1 kg of material, guaranteeing long-lasting use with the highest quality standards. ManufacturerElegooModelRapid PLA+ColorwhiteWeight1 kgDiameter1.75 ± 0.02 mm

ELEGOO print head kit for OrangeStorm GigaPrint head kit designed for ELEGOO OrangeStorm Giga 3D printers. It provides precise and fast printing. At the same time, it is very simple to assemble. It is an ideal solution for users who need a replacement part or want to expand the capabilities of their printer with an additional print head. ManufacturerELEGOOModel50.204.0103CompatibilityELEGOO OrangeStorm Giga 3D printer

PLA Anycubic 1 KG (Peach Fuzz) Filament.PLA Anycubic filament combines precision and environmental protection. With perfect, clean winding, each spool guarantees a smooth, uninterrupted printing process, and a uniform diameter with a tolerance of ±0.02 mm eliminates air bubbles and the risk of nozzle clogging. Color remains intense from the first layer to the last, and biodegradable PLA (polylactide, is one of the most popular materials used for 3D printing) from naturally grown corn is a conscious planet-friendly choice. In addition, a built-in RFiD (Radio-Frequency Identification, a technology for wireless identification of objects using radio waves) chip automatically optimizes the printer's parameters, ensuring perfect results without the need for manual calibration. With Anycubic, every project will gain brilliance and top quality.Perfect winding without tanglesAnycubic's filament spool is designed to ensure perfect material winding. Thanks to the precise control of the filament tension, you don't have to worry about jams or unexpected interruptions. Every meter of Anycubic filament extends smoothly and without interference, resulting in a stable and uninterrupted printing process.Perfect precision and color uniformityThe filament maintains a uniform diameter with a tolerance of +0.02 mm, which guarantees no air bubbles and completely eliminates the risk of nozzle clogging. Each layer of the print looks even and smooth and the color remains intense and consistent from the beginning to the end of the project.Environmentally friendly materialThe PLA used in Anycubic's filament is made from lactic acid created by fermenting corn starch or other plants. Thanks to its biodegradable nature, it is friendly to the planet and completely safe to use. By choosing Anycubic you not only care about the quality of your prints, but also the environment.Smart settings with RFiD technologyAn RFiD chip built into the spooler works with the Anycubic Color Engine Pro to automatically recognize the type of filament and adjust printer parameters. Print settings are optimized non-invasively, allowing you to achieve the best results without having to manually calibrate the device. ManufacturerAnycubicModelIPHPL17-106MaterialPLADimensions1.75±0.02mmTotal length330 mWeight1 kgHardness81DNozzle temperature200-210℃Heating table temperature50-60℃Tensile strength61 MpaVolume1.23g/cm³ColorPeach Fuzz

PLA Anycubic Filament 1 KG (Interstellar Violet)Anycubic PLA Filament combines precision and environmental protection. With perfect, clean winding, each spool guarantees a smooth, uninterrupted printing process, and a uniform diameter with a tolerance of ±0.02 mm eliminates air bubbles and the risk of nozzle clogging. Color remains intense from the first layer to the last, and biodegradable PLA from naturally grown corn is a conscious planet-friendly choice. In addition, the built-in RFiD chip automatically optimizes the printer's parameters, ensuring perfect results without the need for manual calibration. With Anycubic, every project will gain brilliance and top quality.Perfect winding without tanglesAnycubic's filament spool is designed to ensure perfect material winding. Thanks to the precise control of the filament tension, you don't have to worry about jams or unexpected interruptions. Every meter of Anycubic filament extends smoothly and without interference, resulting in a stable and uninterrupted printing process.Perfect precision and color uniformityThe filament maintains a uniform diameter with a tolerance of +0.02 mm, which guarantees no air bubbles and completely eliminates the risk of nozzle clogging. Each layer of the print looks even and smooth and the color remains intense and consistent from the beginning to the end of the project.Environmentally friendly materialThe PLA used in Anycubic's filament is made from lactic acid created by fermenting corn starch or other plants. Thanks to its biodegradable nature, it is friendly to the planet and completely safe to use. By choosing Anycubic you not only care about the quality of your prints, but also the environment.Smart settings with RFiD technologyThe spooler's built-in RFiD chip works with the separately available Anycubic Color Engine Pro module to automatically recognize the type of filament and adjust printer parameters. Print settings are optimized non-intrusively, allowing you to achieve the best results without having to manually calibrate the device. ManufacturerAnycubicModelIPHPL16-106MaterialPLADimensions1.75±0.02mmTotal length330 mWeight1 kgHardness81DNozzle temperature200-210℃Heating table temperature50-60℃Tensile strength61 MpaVolume1.23g/cm³ColorPurple (Interstellar Violet)

Creality Halot X1 Combo 3D PrinterThe Creality Halot X1 Combo is an LCD resin printer that redefines the convenience and precision of 3D printing. It combines ease of use with professional-grade features to create a complete solution for hobbyists, designers and engineers. The technologies used - from the intelligent resin feeding system to the matrix light source and 16K screen - provide unparalleled accuracy, speed and reliability. The kit includes not only the printer, but also the AFU (Auto Feed Unit).No leveling requiredThe Halot X1 requires no manual leveling - it's ready to go almost as soon as it's turned on. Instead of several minutes of complicated setup, one touch of the screen is all it takes - the device automatically calibrates the platform and allows you to start printing immediately. This is a major convenience for both novice users and professionals who want to save time.16K Mono LCD screen and large workspaceThe device is equipped with a 16K resolution LCD screen, which guarantees exceptional accuracy and rich detail. The pixel size of 14 × 19 µm allows the creation of models with a quality unattainable by lower-end printers. It is ideal for printing miniatures, collector's items and precision technical components. At the same time, the Halot X1 offers a workspace of 211.68 × 118.37 × 200 mm, ideal for decorations, prototypes or jewelry. Print toys, birthday gifts, ornaments, game figures and much more!Intelligent resin management system - Auto Feed UnitThe Halot X1 Combo additionally includes an intelligent Auto Feed Unit (AFU) that automates resin handling. It offers automatic feeding and draining of the material, recognition of its type, heating it to the optimal temperature and real-time preview of its quantity in the tank. After placing a bottle of resin with an RFID tag in the module, the printer itself reads its parameters and downloads the corresponding profile from the cloud. This eliminates the need for manual configuration and helps avoid mistakes.Improved design and performanceThe Halot X1 printer is designed for stability and ease of use. A new support structure minimizes vibration, and a quick-release work plate makes it easy to remove prints. A high-precision Z-axis guide with 0.01 mm accuracy ensures smooth movement and uniform layers in the range of 0.01-0.2 mm, while the high print speed - up to 170 mm/h - helps shorten project turnaround times. The Halot X1 also uses a Honeycomb Matrix light source that provides even illumination across the entire work surface. The high exposure intensity (6500 ±10% µW/cm²) increases print speed without sacrificing quality, and the 92-zone intelligent exposure system adjusts to the model geometry, improving detail reproduction.Easy operation and software compatibilityThe printer works with the dedicated HALOT BOX software and the popular ChituBox, allowing full integration of hardware and software. A 3.98-inch touchscreen is also at your disposal for convenient operation of the device.IncludedCreality Halot X5 3D printerAFU module ManufacturerCrealityNameHalot X5 ComboModel1203040118Working area211.68 × 118.37 × 200 mmPrinter dimensions344 × 331 × 434 mmWeight12.75 kgPrinting technologyLCDLight sourceHoneycomb MatrixExposure intensity6500 ±10% µW/cm²Screen resolution16K (15120 × 6230 pixels)Pixel size14 × 19 µmZ-axis accuracy0.01 mmLayer thickness0.01-0.2 mmPrinting speedUp to 170 mm/hourTouch screen3.98-inch capacitive screenSoftwareHALOT BOX / Chitu BoxData transferUSB / Wi-FiInput voltage100-120 V~ 200-240 V~, 50/60 HzPower350 W

ELEGOO PLA Filament (White)ELEGOO PLA filament is a proven material for those looking for stable results, seamless printing and high-quality model finishes. With a diameter of 1.75 ±0.02 mm, it works perfectly with most FDM (Fused Deposition Modeling, a fused deposition technology) printers, offering smooth material feeding and strong layer bonding. It's a versatile solution for prototyping, decorative models and functional components.Optimal diameter and material purityELEGOO PLA filament is made from high-purity raw materials, which translates into an even structure and no air bubbles. Each spool is also characterized by a diameter of 1.75 mm ± 0.02 mm and dimensional stability, which minimizes the risk of nozzle clogging and ensures high printing repeatability - especially important when creating a series of components.Printing without tangles and interferenceELEGOO spools are wound evenly, which prevents knots and guarantees consistent, uninterrupted filament feeding. This allows you to focus on your printing parameters and design!Strong layer bonding and minimal shrinkagePLA ELEGOO is distinguished by excellent interlayer adhesion, which directly affects the durability of prints and their aesthetics. In addition, low shrinkage means less risk of distortion - even with larger models.Compatibility and readiness for useThe filament is fully compatible with FDM printers that support 1.75mm diameter material. So you can print figures, accessories, prototypes and much more without worry! ManufacturerELEGOOModel50.203.0039MaterialPLAColorWhiteDiameter1.75 ±0.02 mmWeight1 kgCompatibilityFDM printers (supporting 1.75 mm diameter filament)

Miraco Pro'l on 32 GB RAM-mälu • Salvestab nii väikseid kui suuri objekte • Kirurgiline täpsus • Kasutustemperatuurid -10 °C kuni +40 °C • Kiire laadimine

Anycubic Christmas PLA Filament Set (4 pcs)The Anycubic Christmas Filament Set will allow you to create creative projects for the holidays and beyond. The material offers intense, vivid colors and a silky sheen, making it ideal for printing Christmas tree ornaments, decorations and gifts. The high quality of the material helps produce prints that are instantly eye-catching, and the ability to control the look of the models by changing the printing parameters gives you full freedom to shape the final effect. In the set you will find four spools of PLA Silk filament in festive colors: white, red, green and gold. The product is compatible with most FDM 3D printers on the market.Silky sheen and crisp colorsPLA Silk filaments are distinguished by a smooth, shiny surface on which light reflects in a distinctive way. The saturated colors - ideal for holiday projects - highlight details and add depth to models. The sheen is visible throughout the surface, making even simple forms look striking and eye-catching.Full control over the effectsCustomize the look of your model to suit your vision. By changing the nozzle temperature and print speed, you can achieve varying degrees of smoothness and gloss intensity. Higher temperatures combined with lower speeds make the filament melt evenly, resulting in a shinier finish.Easier printer operation with smart identificationThe included filaments are equipped with smart chips that work with the Anycubic ACE Pro printer. Their function is to automatically transfer information about the material, which streamlines setup and eliminates the need to manually enter parameters. This is especially convenient when working with different types of plastic and during frequent color changes.High resistance to breakage and hassle-free handlingAnycubic's PLA Silk filaments undergo rigorous bending and tearing tests, which confirm their flexibility and resistance to breakage. This ensures that the plastic works stably, does not break during printing and minimizes the risk of technical errors. Such properties translate into smooth printing and ensure the durability of the finished model.Reusable spoolsThe spools that hold the filaments can be reused - the design with a threaded connection system provides exceptional stability and prevents the coil from tangling. This allows you to cut costs and reduce waste in your next material purchases.IncludedPLA Silk White filamentPLA Silk Red filamentPLA Filament Silk GreenPLA Silk Gold Filament ManufacturerAnycubicManufacturer CodeIPHSCSD-103-4Filament typePLA SilkNumber of spools included4Filament colorsWhite, red, green, goldDryingRecommendedDrying conditions50-65°C, 6-8 hCompatibility with ACE Pro Multicolor Filament BoxYesRecommended nozzle diameter0.4 mm or largerRecommended nozzle temperature210-240°CRecommended table temperature55-56°CRecommended printing speed50-250 mm/secMaximum print speed8 sMaximum volumetric printing speed (flow rate)12 mm³/sDensity1.22 g/cm³MFI9 g/10 min (190°C / 2.16 kg)Melting point164°CVicat softening point54°CDeflection temperature under load (0.45 MPa)53°CYoung's modulus2200±200 MPaTensile strength37±4 MPaTensile strength (Z)17±4 MPaElongation at break28±5%Modulus of elasticity at bending2100±100 MPaBending strength2400±160 MPaImpact strength of Izod (X-Y)24.7±1.8 kJ/m²Impact strength of Izod (Z)8±1.1 kJ/m²

Creality 3D-printeri niit Filament Hyper PLA RFID 1,75 mm 1kg kuldne

Creality Sermoon X1 3D ScannerIf your goal is to digitally reproduce real objects with the highest possible accuracy, the Creality Sermoon X1 3D Scanner is the tool for you. This advanced 3D scanner was created for professionals—engineers, designers, reverse engineering specialists, as well as industrial and design applications where every detail matters. With its extremely precise measurements and extensive operating modes, it is the ideal choice when you need high-quality 3D data and work efficiency.Unmatched scanning accuracy and stabilityAt the heart of the Sermoon X1 is a high-precision scanning system that achieves accuracy of up to 0.02 mm, and with the use of built-in scaled photogrammetry, volumetric precision reaches 0.02 mm + 0.03 mm/m. These results meet the expectations of many technical and professional applications. In practice, this means that the scans faithfully reproduce the shape and actual dimensions of the object, which is crucial in quality control, CAD design, and reverse engineering.Wide working fieldThe use of proprietary optimization algorithms allows the Sermoon X1 scanner to offer an extremely large scanning field. Such a wide working area significantly reduces the need for markers, which translates into a faster, smoother, and more efficient scanning process. In line laser mode, the maximum field of view is 650 × 531 mm, while in infrared mode it reaches an impressive 1300 × 935 mm. Thanks to a hybrid system combining blue laser lines and structured infrared light, the Sermoon X1 supports a wide range of scanning sizes, from small 5 × 5 × 5 mm³ to large 4000 × 4000 × 4000 mm³.With details in mindThe X1's single-laser deep hole scanning mode allows you to easily capture 3D data from hard-to-reach areas such as deep holes, narrow gaps, and recesses. Support for scanning narrow holes with a depth-to-diameter ratio of up to 6:1 ensures more accurate 3D data acquisition, which is ideal for design, inspection, analysis, and more. The scanner is equipped with a high-performance Qualcomm ISP chip, a 2 MP full-color RGB camera, and additional lighting for richer and more realistic textures.Versatile operating modesThe Creality Sermoon X1 scanner offers several operating modes tailored to different tasks. Single laser lines are ideal for deep and narrow spaces that other systems cannot capture. The NIR mode with structured light allows for tagless scanning of even large items. Seven parallel laser lines are great for detailed scanning of technical surfaces, while 34 intersecting laser lines speed up the scanning of medium and large objects. This makes the X1 an extremely versatile tool in a professional workshop.Efficient work without compromiseProfessional projects require both precision and speed. The X1 achieves a scanning speed of up to 90 frames per second, and the system can capture millions of measurements per second in various operating modes. This means that even larger parts or complex geometries can be scanned in less time without losing detail quality. With advanced Wi-Fi 6 technology, the X1 scanner delivers fast, cable-free scanning and uncompromising battery life. It easily adapts to different measurement environments, giving you the freedom to scan anywhere.Compact design and comfortable to useThe one-piece optoelectronic body and lens mount, made of CNC-machined metal, combine high durability with a lightweight, refined design (weighing only 530 g). Its compact dimensions (216 × 74 × 51 mm) make the scanner mobile and easy to use, facilitating work in all conditions. The mechanical locking system effectively eliminates backlash and the risk of component dispersion, which has a direct impact on the repeatability and accuracy of scans. High-strength materials ensure excellent rigidity and vibration resistance, so that every scanning process is stable, precise, and reliable, even in demanding working conditions.Wide compatibilityThe Sermoon X1 scanner works with the advanced CrealityScan 4.0 scanning software, which facilitates the import of scans, their processing, and export to popular formats (STL, OBJ, PLY). This allows the prepared data to be used without hindrance in CAD/CAM programs for further design, analysis, or production. The intuitive interface and automatic point registration tools mean that even complex 3D models can be prepared with minimal time and effort.Safe operation in all conditionsThe scanner is designed for reliable operation in both workshop and outdoor conditions. The device works efficiently even in sunlight – in single or 7-line laser beam mode at light intensities up to 50,000 lux, and in 34 cross-line mode up to 100,000 lux. Importantly, scanning of black and metal surfaces can be performed without the need for matting sprays, which significantly speeds up work and increases comfort of use, especially in field applications.Intelligent stabilizationAn advanced stabilization system ensures smooth and precise scanning even during prolonged operation. Thanks to an AI-controlled temperature compensation algorithm and an efficient heat management system, the Sermoon X1 maintains stable output parameters throughout its operation. Combined with One-Shot 3D imaging technology, this solution increases object tracking stability, effectively reducing frame drops and data connection errors resulting from vibrations or movements, which translates into higher quality and consistency of scans.Included in the setscannerhigh-precision glass calibration platex2 measuring scalepower adapterUSB 3.0 cable (Type-C to Type-A)data cablecharging cablereflective marking points (D6 mm*40 sheets, D3 mm*40 sheets)manually tightened quick release cardmagnetic phone holderWi-Fi 6 adapterType-C power adaptercleaning clothheadbandwaterproof boxuser manual GeneralManufacturerCrealityModelSermoon X1Scanning modesDeep hole scanning, detailed scanning, fast scanning, markerless scanningMarker recognition enhancement12 blue LEDsLaser safetyClass II (safe for the eyes)Weight530 gDimensions216mm*74mm*51mmMechanical structureOptoelectronic bracket and lens base, CNC integrated molding, complete mechanical locking (better stability, longer service life)Calibration plateHigh-precision glass calibration plateWireless operationSupportedComputer configurationWindows: i7-Gen10 processor, Nvidia graphics card (8 GB VRAM), 32 GB RAM, Windows 10/11 (64-bit); Minimum requirements: i7-Gen7 processor, Nvidia graphics card (6 GB VRAM), 16 GB RAM, Windows 10/11 (64-bit); macOS: M1/M2/M3/M4 series processor, 16 GB RAMInterface modeUSB 3.0 × 1Input power12V, 3AOperating temperature-10°C to 40°COperating humidity10-90%RHCertificationsCE, RoHS, REACH, WEEE, FDA, FCC, UL, IC, RCM, PSE, SRRC, GB 4943.1 Single line scanning modeAccuracyUp to 0.02 mmVolume accuracy0.02 mm + 0.04 mm/m 0.02 mm + 0.03 mm/m (with scale)Scanning speed84,000 measurements per secondScanning speedUp to 90 frames per second3D resolution0.05-2mmPhotogrammetryPhotogrammetry mode (with 2x magnetic carbon fiber scale)Minimum scanning volume5mm x 5mm x 5mmSingle capture range215mm x 167mm@200mm, 325mm x 323mm@300mm, 434mm x 394mm@400mm, 542mm x 463mm@500mm, 650mm x 531mm@600mmWorking distance200mm-600mmColor mappingSupportedAlignment modeMarker / Global markerColored supplementary light12 white LEDsOutdoor scanningBelow 100,000 lux Scanning in 7 parallel laser line modeAccuracyUp to 0.02 mmVolume accuracy0.02 mm + 0.04 mm/m 0.02 mm + 0.03 mm/m (with scale)Scanning speed756,000 measurements per secondScanning rateUp to 90 frames per second3D resolution0.05-2mmPhotogrammetryPhotogrammetry mode (with 2x magnetic carbon fiber scale)Minimum scanning volume5mm x 5mm x 5mmSingle capture range215mm x 167mm@200mm, 325mm x 323mm@300mm, 434mm x 394mm@400mm, 542mm x 463mm@500mm, 650mm x 531mm@600mmWorking distance150mm-400mmColor mappingSupportedAlignment modeMarker / Global markerColored supplementary light12 white LEDsOutdoor scanningBelow 50,000 lux Scanning in 34 intersecting laser line modeAccuracyUp to 0.02 mmVolume accuracy0.02 mm + 0.04 mm/m 0.02 mm + 0.03 mm/m (with scale)Scanning speed1,734,000 measurements per secondScanning rateUp to 85 frames per second3D resolution0.05-2mmPhotogrammetryPhotogrammetry mode (with 2x magnetic carbon fiber scale)Minimum scanning volume5mm x 5mm x 5mmSingle capture range215mm x 167mm@200mm, 325mm x 323mm@300mm, 434mm x 394mm@400mm, 542mm x 463mm@500mm, 650mm x 531mm@600mmWorking distance200mm-600mmColor mappingSupportedAlignment modeMarker / Global markerColored fill light12 white LEDsOutdoor scanningBelow 100,000 lux Markerless scanning (NIR)AccuracyUp to 0.05 mmVolume accuracy0.05 mm + 0.1 mm/mScanning speed5,000,000 measurements per secondFrame rateUp to 30 frames per second3D resolution0.1-2 mmPhotogrammetryPhotogrammetry mode (with 2x magnetic carbon fiber scale)Minimum scan volume150mm x 150mm x 150mmSingle capture range650mm x 531mm at 600mm; 1300mm x 935mm at 1200mmWorking distance170mm-1200mmColor mappingSupportedAlignment modeMarker / Global marker / Geometry / TextureColor supplementary light12 white LEDsOutdoor scanningBelow 30,000 lux

Sunlu PETG Filament (beige)Sunlu PETG filament in white is an excellent choice for those who expect not only aesthetically pleasing results from 3D printing but also high durability in the finished models. The material is distinguished by excellent interlayer adhesion, which translates to smooth, consistent, and sturdy prints with very good structural integrity. This reduces the risk of warping, making the entire printing process more predictable and comfortable. It’s a filament that will prove its worth wherever quality, durability, and confidence in the final result matter.Durability that stands the test of timePETG is renowned for its durability and, in this regard, outperforms many other popular filaments. Sunlu PETG allows you to create durable, robust parts that withstand daily use, making it ideal for printing components exposed to heavy loads and intensive use. High impact resistance means that prints better withstand impacts, shocks, or accidental drops, retaining their shape without cracks or damage. It is the ideal choice for projects where both appearance and functionality and longevity matter.Always durable printsFinished models made from PETG retain their properties for a long time, making this material very versatile in application. Sunlu PETG filament is suitable for creating both functional interior elements and parts intended for outdoor use, where weather resistance is essential. It is the solution for users who want to print durable, resilient models ready for use in more demanding environments. ManufacturerSunluModelPETG BeColorBeigeDensity1.27 g/cm³Vicat softening temperature68 °CHeat deflection temperature68 °CMelting temperature195 °CMelt flow rate5.3 g/10 minTensile strength53 MPaElongation at break17.3%Flexural strength77 MPaFlexural modulus2226 MPaImpact strength2.7 kJ/m

Ideal for printing high-precision and high-strength structural components that meet demanding engineering requirements. With 15% carbon fiber, it ensures greater dimen- sional stability during printing, low shrinkage, no warping, and perfect alignment between printed model parts. The saturated water absorption rate of PPA-CF is only half that of standard PA, significantly improving the di- mensional stability and mechanical performance of nylon materials after moisture absorption. exceptional toughness makes it an ideal printing material for models that endure impacts, collisions, and vibrations. Density: 1.06g/cm³ Printing temperature: 280-300°C Heated bed temperature: 90~105°C Printing speed: 100mm/s Drying conditions: 80 °C, 8-12 h (Umluftofen) Enclosed printing required: Yes Filament diameter: 1.75mm Net weight: 1Kg/2.2lb Gross weight: 1.29Kg/2.8lb Package dimensions: 210*210*70mm Printing surface: High-temperature printing plate, engineering plate, PEI printing plate

eSUN 3D materjal eSilk PLA 1kg rainbow

eSun PLA-Matte Dual 1.75 mm FilamentThe eSun PLA-Matte Dual 1.75 mm, 1 kg filament in green-purple is a 3D printing material for FDM technology that combines two distinctly separate colors in a single strand. This allows you to create two-color models without having to change filaments during printing. The matte finish reduces the visibility of print layers, improving the appearance of the finished parts. The material is characterized by low shrinkage, minimal warping, and easy removal of support structures. It is ideal for creating decorations, cosplay accessories, large models, and prototypes used to test preliminary design concepts.Stable printing and easy support removalThanks to stable and even filament feed, the material ensures uninterrupted operation even during long print jobs. Smooth feeding reduces the risk of nozzle clogs, and its low brittleness minimizes the risk of breakage. The filament also allows for easy removal of support structures from the finished model, which simplifies post-processing after printing. It is important to note that the material is relatively soft, so the feed pressure should not be too high to avoid hindering proper filament feeding.Printing ParametersThe eSun PLA-Matte Dual filament allows for printing at speeds ranging from 40 to 300 mm/s at a nozzle temperature of 215–230°C and a bed temperature of 45–60°C. The best results are achieved with 100% post-print cooling. The parameters provided are based on a 0.4 mm nozzle and may vary when using other nozzle diameters. The appropriate settings allow you to take advantage of the material’s properties when printing both small decorative elements and larger projects. ManufacturereSunModelPLA-Matte DualMaterial TypePLAColorgreen-purpleFilament Diameter1.75 mmNet weight of filament1 kgPrinting technologyFDMSurface finishmatteNozzle temperature215–230°CBed temperature45–60°CRecommended print speed40–300 mm/sCooling100%Density1.174 g/cm³Tensile strength13.58 MPaElongation at break39%Flexural strength56.72 MPaHeat deflection temperature54°C

eSun PLA+ Filament (1.75 mm, 1 kg, gold)eSun PLA+ filament stands out for its increased strength and crack resistance compared to standard PLA. Thanks to its low shrinkage and limited susceptibility to warping, it produces precise, aesthetically pleasing prints, and its diameter tolerance of ±0.03 mm ensures consistent feed. The material is also suitable for printing at speeds of up to 350 mm/s, enabling the efficient completion of demanding projects.Smooth Printing Without JamsThe carefully wound filament, approximately 340–350 m in length, reduces the risk of tangling and jams during operation. The material melts well and flows smoothly through the nozzle, minimizing the risk of clogging. Minimal stringing and the absence of air bubbles help produce clean prints with clearly defined details.From figurines to functional itemsThis material is ideal for printing figurines, decorations, artistic models, handles, organizers, and other practical accessories. It is compatible with most FDM 3D printers, including models from Bambu Lab, Creality, Prusa, Anycubic, and many others. It is made from plant-based starch and is suitable for indoor printing. ManufacturereSunManufacturer CodePLA+175J1P1ColorGoldMaterialPLA+Filament Diameter1.75 mmDiameter Tolerance±0.03 mmNet Weight1 kgFilament Length340–350 mPrint SpeedUp to 350 mm/sTensile Strength (Z-axis)32.34 MPaFlexural Modulus (XY-axis)4.61Notched Impact Strength (XY-axis)4.61 kJ/m²CompatibilityFDM 3D printersStandards and certificationsEN71, FDA, REACH, RoHS

eSun PLA+ Filament (1.75 mm, 1 kg, orange)eSun PLA+ filament stands out for its increased strength and crack resistance compared to standard PLA. Thanks to its low shrinkage and limited susceptibility to warping, it produces precise, aesthetically pleasing prints, and its diameter tolerance of ±0.03 mm ensures consistent feed. The material is also suitable for printing at speeds of up to 350 mm/s, enabling the efficient completion of demanding projects.Smooth Printing Without JamsThe carefully wound filament, approximately 340–350 m in length, reduces the risk of tangling and jams during operation. The material melts well and flows smoothly through the nozzle, minimizing the risk of clogging. Minimal stringing and the absence of air bubbles help produce clean prints with clearly defined details.From figurines to functional itemsThis material is ideal for printing figurines, decorations, artistic models, handles, organizers, and other practical accessories. It is compatible with most FDM 3D printers, including models from Bambu Lab, Creality, Prusa, Anycubic, and many others. It is made from plant-based starch and is suitable for indoor printing. ManufacturereSunManufacturer CodePLA+175O1P1ColorOrangeMaterialPLA+Filament Diameter1.75 mmDiameter Tolerance±0.03 mmNet Weight1 kgFilament Length340–350 mPrint SpeedUp to 350 mm/sTensile Strength (Z-axis)32.34 MPaFlexural Modulus (XY-axis)4.61Notched Impact Strength (XY-axis)4.61 kJ/m²CompatibilityFDM 3D printersStandards and certificationsEN71, FDA, REACH, RoHS

eSun PLA+ Filament (1.75 mm, 1 kg, silver)eSun PLA+ filament stands out for its increased strength and crack resistance compared to standard PLA. Thanks to its low shrinkage and limited susceptibility to warping, it produces precise, aesthetically pleasing prints, and its diameter tolerance of ±0.03 mm ensures consistent feed. The material is also suitable for printing at speeds of up to 350 mm/s, enabling the efficient completion of demanding projects.Smooth Printing Without JamsThe carefully wound filament, approximately 340–350 m in length, reduces the risk of tangling and jams during operation. The material melts well and flows smoothly through the nozzle, minimizing the risk of clogging. Minimal stringing and the absence of air bubbles help produce clean prints with clearly defined details.From figurines to functional itemsThis material is ideal for printing figurines, decorations, artistic models, handles, organizers, and other practical accessories. It is compatible with most FDM 3D printers, including models from Bambu Lab, Creality, Prusa, Anycubic, and many others. It is made from plant-based starch and is suitable for indoor printing. ManufacturereSunManufacturer CodePLA+175S1P1ColorSilverMaterialPLA+Filament Diameter1.75 mmDiameter Tolerance±0.03 mmNet Weight1 kgFilament Length340–350 mPrint SpeedUp to 350 mm/sTensile Strength (Z-axis)32.34 MPaFlexural Modulus (XY-axis)4.61Notched Impact Strength (XY-axis)4.61 kJ/m²CompatibilityFDM 3D printersStandards and certificationsEN71, FDA, REACH, RoHS

QiDi Q2C Combo 3D printerThe QiDi Q2C Combo printer is a modern device designed for fast and precise 3D printing. It offers a large workspace, high hotend operating temperature, and stable CoreXY construction, making it suitable for both hobbyist projects and more demanding technical applications. With support for multiple filament types and the ability to work with the QIDI Box system for multi-color printing, the printer offers great freedom in model creation.Large workspaceThe QiDi Q2C Combo offers a working area of 270 × 270 × 256 mm, allowing you to print larger parts or multiple models at the same time. This workspace gives you more design freedom and reduces the need to split models into smaller parts. The stable construction of the device, measuring 402 × 438 × 494 mm, ensures adequate rigidity during operation.New generation automatic levelingThe printer uses a modern leveling sensor in which the nozzle itself acts as a sensor. This means direct contact with the work table surface, which eliminates the problem of probe offset and measurement errors. The system works independently of the type of table surface or environmental vibrations, so the first layer is accurate and repeatable. This makes printer configuration easier and the leveling process automatic.High speed and precision of movementThe QiDi Q2C Combo is equipped with a CoreXY design and a new 1.5GT drive belt with increased tooth density. This solution improves smoothness of movement and reduces vibrations that can affect print quality. The printer achieves a head speed of up to 600 mm/s and acceleration of up to 20,000 mm/s², which significantly reduces printing time without compromising precision.Modern hotend up to 370°CThe new generation hotend allows operation at temperatures up to 370°C. The design with a ceramic throat and an improved heat dissipation system reduces the risk of nozzle clogging. The bimetallic hardened steel nozzle is wear-resistant, making it well suited for filaments containing carbon or glass fibers.Support for multiple materialsThe printer supports a wide range of 1.75 mm diameter filaments. It is possible to print with popular materials such as PLA, PETG, and ABS, but also with more demanding materials such as ASA, TPU, PA, and PC. Thanks to its durable nozzle and steel extruder gears, the printer can also handle filaments reinforced with carbon or glass fibers.Stable work platformThe model is equipped with a heated work table with an aluminum base that reaches a temperature of up to 120°C. Its surface features a double-sided magnetic PEI plate, which ensures good adhesion of prints during operation and facilitates their quick removal after printing.Convenient operation and connectivityThe printer has a 4.3-inch color touch screen that allows for convenient control of the device's functions. It supports Wi-Fi, Ethernet, and USB connectivity, making it easy to transfer files for printing. The device works with QIDI Studio software and popular slicers such as Orca and PrusaSlicer. Supported file formats include STL, OBJ, 3MF, STEP, and STP.Additional features for increased convenienceThe QiDi Q2C Combo is equipped with a power loss recovery feature and a filament end sensor. The printer also supports an optional camera with timelapse function and an air filter. Additionally, it can be used with the QIDI Box system, which allows for multi-color printing and material feed control. ManufacturerQiDiModelQ2C ComboPrinting technologyFDMWorking area270 × 270 × 256 mmMaximum printing speedup to 600 mm/sMaximum accelerationup to 20000 mm/s²Filament diameter1.75 mmNozzle diameter0.4 mmMaximum head temperatureup to 370°CMaximum table temperatureup to 120°CCompatible filamentsPLA, ABS, ASA, PETG, TPU, PA, PC, and carbon fiber or glass fiber reinforced filamentsMulti-color systemCompatible with QIDI BoxScreen4.3 inches, touchscreen (480 × 272)Connectivity2.4 GHz Wi-Fi, Ethernet, USBMemory32 GB eMMC + USB Flash DriveFilament sensorYes (Run-out sensor)Print resumption after power failureYesSlicerQIDI Studio, OrcaSlicer, PrusaSlicer, and other compatible programsSupported file formatsSTL, OBJ, 3MF, STEP, STPVoltage110V / 220–240V AC, 50/60HzRated power350 WPrinter dimensions402 × 438 × 494 mmPackage dimensions480 × 520 × 585 mmWeight16.9 kg

Anycubic IPHTFBK-101 PETG-CF Filament, 1 kg (must)

Sunlu Sunlu PLA+ Filament 2.0 (magenta)

Sunlu Sunlu PLA+ 2.0 Filament (Roasted Chestnut)

Sunlu Sunlu PLA+ Filament (must)

eSun PLA-Basic Filament (1.75 mm, 1 kg, light gray)eSun PLA-Basic filament is an excellent choice for both beginners and more experienced 3D printer users. It stands out for its ease of printing, high precision, and increased strength and wear resistance. With a diameter of 1.75 mm and a tolerance of ±0.02 mm, it ensures even material feed, which results in a stable print process. In addition, it allows for printing at speeds of 250–300 mm/s, enabling you to complete projects faster. It’s ideal for creating models, figurines, decorations, and props, among other things.Precise prints without complicationsWith eSun PLA-Basic filament, achieving aesthetically pleasing and accurate prints becomes easier. The material is characterized by low shrinkage and a limited tendency to warp, crack, or form strings between model parts. It also minimizes the formation of air bubbles and ensures smooth extrusion without clogging the nozzle. Additionally, it is made from carefully processed plant-based raw materials sourced from renewable resources, is biodegradable, and does not emit an unpleasant odor during printing.Wide Compatibility and Convenient StorageeSun PLA-Basic filament is compatible with most 3D printers using FDM technology, including models from Bambu Lab, Creality, Anycubic, Prusa, Elegoo, and Raise3D. A carefully wound spool containing 1 kg of material reduces the risk of filament tangling, ensuring smooth operation even during longer prints. The product is delivered in an airtight vacuum-sealed package with a desiccant, which helps protect the material from moisture, dust, and dirt before opening. ManufacturereSunManufacturer CodePLA-Basic175Q-H1P1ColorLight GrayMaterialPLA-BasicFilament Diameter1.75 mmDiameter tolerance±0.02 mmNet weight of filament1 kgPrint speed250–300 mm/sCompatibilityFDM 3D printersSpool Diameter200 mmSpool Width63 mmSpool Hole Diameter55 mm

Sunlu Sunlu PLA+ Filament (beež)

Sunlu Sunlu PLA Classic valge Filament 1.75mm 1KG

Sunlu Sunlu PLA+ Filament (Cherry)

Sunlu Sunlu PLA+ Silk Tri-Color Filament (punane, kollane, and roheline)

Sunlu Sunlu PP Filament (Natural valge)

Sunlu Sunlu Wood Filament (Cherry)

3DP-TPE1.75-01-Y Filament

Tootja: Spectrum Group Tootegrupp: Filament Filament type: PLA Special Available filament värvi: Stone Age Dark Filament diameter: 1.75 mm Tolerance of the diameter: 0.05 mm Recommended operating temperature - head: 220 °C, 190 °C Packaging type: Box items in wrapper: 1 tk/pack Vacuum pump protection against moisture: Ei Desiccant: Ei Filament wound around the spool: Jah Spool diameter: 20 cm, 5.2 cm Netokaal: 1 kg Lisainfo: www.spectrumfilaments.com [LINK]

Verbatim 3D-printeri niit PLA 1,75 mm 1 kg must

Product kirjeldus: Gembird - roheline - PETG filament Product Type: PETG filament Filament Diameter: 1.75 mm kaal: 1 kg Printing tehnoloogia: FDM Printing värv: Green Packaging Type: Reel

PLA Rainbow Pastel filament Refill from Rosa3D. PLA (polylactide) is a durable and easy-to-use filament, ideal for beginners in 3D printing.PLA Rainbow is a unique blend of PLA (polylactide)-based materials. Each spool contains several smoothly changing colors. This makes the print made of filament from the PLA Rainbow product line unique.Application:decorations (e.g. interior design elements such as lamp shades or vases)toys (e.g. figurines)gadgets (e.g. key rings, pendants)printing personalized gifts.PLA Rainbow Pastel is an unique combination of seven smoothly transitioning colors, known from the PLA Pastel range: peach, pink, lavender, blue, mint, green and yellow. A full color cycle is contained in ~80m of filament (~240g). The 1kg ReFill PLA Pastel Rainbow contains over 4 full cycles of colors transitions.ATTENTION! The frequency and sequence of color transitions is fixed for a given production batch. A single spool may start at any point in the process, e.g. one spool may start red and another spool orange. Shade differences are allowed. Printable model for refill spool sides you can download here:Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: deep red, luminous orange and golden tonesDiameter: 1.75 mmWeight: 1000 g (vacuum packed)Density: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa

PET-G (poly(ethylene terephthalate) with addition of glycol) is a material that is easy to print, has high transparency and is odourless.Applications: prototyping, large-format printing, lampshades/enclosures.PET-G Standard filament from ROSA3D is characterised by an ease of printing comparable to PLA. It is dedicated for users who deal with amateur and professional 3D printing. Details made from PET-G Standard are feature precise details, good adhesion to the bed, no odour and a low level of shrinkage. Prints made from PET-G Standard are distinguished by their high chemical resistance. They can be subjected to sandblasting, drilling, sawing, grinding, cutting and painting without compromising the structural integrity of the component. PET-G Standard filament was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product.Recommended printing parametersextrusion temperature 220-250°Cbed temperature: 60-80°Cfan: 0-60% Printable model for refill spool sides you can download here:Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: juicy orangeDiameter: 1.75 mmWeight: 1000 g (vacuum packed)Density: 1.29 g/cm3Odor: odourlessHeat distortion temperature: 78°C (ISO 306)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,02Tensile elongation: 6 %Tensile strength (to break): 20 MPa

PET-G (poly(ethylene terephthalate) with addition of glycol) is a material that is easy to print, has high transparency and is odourless.Applications: prototyping, large-format printing, lampshades/enclosures.PET-G Standard filament from ROSA3D is characterised by an ease of printing comparable to PLA. It is dedicated for users who deal with amateur and professional 3D printing. Details made from PET-G Standard are feature precise details, good adhesion to the bed, no odour and a low level of shrinkage. Prints made from PET-G Standard are distinguished by their high chemical resistance. They can be subjected to sandblasting, drilling, sawing, grinding, cutting and painting without compromising the structural integrity of the component. PET-G Standard filament was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product.Recommended printing parametersextrusion temperature 220-250°Cbed temperature: 60-80°Cfan: 0-60% Printable model for refill spool sides you can download here:Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: greyDiameter: 1.75 mmWeight: 1000 g (vacuum packed)Density: 1.29 g/cm3Odor: odourlessHeat distortion temperature: 78°C (ISO 306)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,02Tensile elongation: 6 %Tensile strength (to break): 20 MPa

Das Creality Ender PLA Filament ist eine Serie von Filamenten, die Creality für den täglichen Gebrauch entwickelt hat. Perfekt, wenn man ein hochwertiges Filament in Standardfarben benötigt. Das Ender PLA Filament ist ein qualitativ hochwertiges 3D-Druckmaterial für den 1,75 mm 3D-Drucker.

eSUN 3D materjal ePLA-Matte 1kg Milky White