3D printerid ja tarvikud

3Doodler Start Eco Plastic - Fire and Ice Mixed Bag 250 Compostable plastic Orange, Turquoise, White, Yellow 1 g

Creality CR-Silk PLA Filament (Silver)Creality's CR-Silk filament features a metallic, elegant sheen, making it eye-catching and perfect for printing figurines, decorations and even jewelry. It also features impressive durability and compatibility with most Creality printers. What's more, durable yet environmentally friendly materials have been used to make it.Fast and trouble-free printingThanks to its careful winding, the filament allows for smooth, trouble-free printing at speeds of up to 100 mm/s. It is also resistant to tangling. This will save you time and avoid wasting materials!Elegant and durableThe filament is very pleasant to the touch and is distinguished by its elegant, delicate sheen - it allows you to achieve a pearly and smooth surface of the model without additional polishing. In addition, it was made of environmentally friendly, durable materials (PLA), making it resistant to deformation and distinguished by low shrinkage. Its tensile strength reaches 35 MPa, and its flexural strength is as high as 67 MPa. ManufacturerCrealityNameCR-Silk FilamentModel3301120007ColorSilverExtruder temperatureFrom 190°C to 230°CTable temperatureFrom no heating to 60°CPrinting speed40-100 mm/secTensile strength35 MPaBending strength67 MPaFilament diameter1.75 mmWeight1 kg

Creality CR-Silk PLA Filament (Gold-Red)Creality's CR-Silk filament features a metallic, elegant sheen, making it eye-catching and perfect for printing figurines, decorations and even jewelry. It also features impressive durability and compatibility with most Creality printers. What's more, durable yet environmentally friendly materials have been used to make it.Fast and trouble-free printingThanks to its careful winding, the filament allows for smooth, trouble-free printing at speeds of up to 100 mm/s. It is also resistant to tangling. This will save you time and avoid wasting materials!Elegant and durableThe filament is very pleasant to the touch and is distinguished by its elegant, delicate sheen - it allows you to achieve a pearly and smooth surface of the model without additional polishing. In addition, it was made of environmentally friendly, durable materials (PLA), making it resistant to deformation and distinguished by low shrinkage. Its tensile strength reaches 35 MPa, and its flexural strength is as high as 67 MPa. ManufacturerCrealityNameCR-Silk FilamentModel3301120009ColorGolden-redExtruder temperatureFrom 190°C to 230°CTable temperatureFrom no heating to 60°CPrinting speed40-100 mm/secTensile strength35 MPaBending strength67 MPaFilament diameter1.75 mmWeight1 kg

Creality K2 Plus Combo 3D PrinterThe Creality K2 Plus Combo is a 3D printer with a large (350 x 350 x 350 mm) workspace that allows for fast and precise printing of larger models. With its robust design, optional CFS multicolor system and advanced extruder, the device guarantees high quality prints and reliability, meeting the needs of beginners and professionals alike. The kit also includes the CFS system.CFS system - convenient management of filamentsThe CFS system (Color Filament System) is an innovative solution, allowing you to use 4 filaments simultaneously. Equipped with an RFID module, it automatically recognizes the filaments and adjusts the printing parameters. It supports materials with a diameter of 1.75 mm, such as PLA, PETG, ABS or PLA-CF, and thanks to an active LCD display, it enables control of temperature and storage humidity. The 4-slot design and LED indicators make it convenient to use, and the printer's power supply eliminates the need for additional power sources. The CFS allows you to create multi-color models and work with a variety of filaments, offering unparalleled precision and convenience.Large workspace for greater freedomThe Creality K2 Plus Combo offers a working space of 350 x 350 x 350 mm, which allows the printing of large models without the need to split them. This makes the device ideal for complex projects such as prototypes, decorations or architectural models.Reliable "Matrix" design and stable operationThe "Matrix" frame made of cast aluminum provides exceptional rigidity and durability. Thanks to its robust design and a double Z-axis supported by four linear guides, the device operates stably even when printing at high speeds. This solution minimizes vibration, which is crucial when creating precision parts.Actively heated chamber and versatile filament supportOne of the key advantages of the K2 Plus Combo is its ability to work with a wide range of filaments, such as PLA, ABS, PETG, PA (nylon), etc. The actively heated chamber provides the right conditions for printing even the most demanding filaments, allowing you to achieve professional results. In addition, thanks to the CFS system (included), the K2 Plus Combo allows you to print up to 16 colors simultaneously.New generation precision extruderThe K2 Plus Combo is equipped with an advanced extruder with direct filament feeding function, which guarantees precise and stable printing. The 0.4mm diameter nozzle can reach temperatures of up to 350°C, allowing it to work with a variety of filaments. In addition, the quick-change nozzle system improves maintenance of the device.Intelligent print monitoring with AI camerasDual AI cameras monitor the printing process in real time, adjusting filament flow and identifying potential errors such as nozzle blockages. These features guarantee stable operation and minimize the risk of print failure. The K2 Plus Combo also offers automatic leveling, which saves the user time and ensures a perfectly smooth first layer.Drive system and quiet operationThe printer uses an advanced drive system with a high-precision stepper motor to achieve print speeds of up to 600 mm/second at an acceleration of 30,000 mm/second. Despite its high power, the K2 Plus Combo runs extremely quietly (45 dB), making it an ideal choice for both the office and home.Innovative features - from filament cutting to active belt tensioningThe K2 Plus Combo offers amenities that make the printing process even more efficient. The built-in automatic filament cutting system eliminates unnecessary manual operations, while the active belt tensioning system ensures precise print head movements, which affects the quality of prints.Easy operationThe printer is ready to use right out of the box. The calibration process is intuitive and quick, allowing the user to focus on completing projects. The built-in RFID reader automatically recognizes the filaments and selects the optimal print settings, which minimizes the risk of errors and saves time.Remote control and dedicated softwareWith built-in Wi-Fi and the Creality Cloud app, you can control the printer remotely. Also at your disposal is Creality OS, which offers intelligent management of multiple filaments and allows for precise settings in expert mode. The FLUIDD WebUI interface is also supported for your convenience. Creality Print 5.0, on the other hand, supports Gcode and 3MF file formats and allows precise settings of printing parameters for full control over the process. In addition, a 4.3-inch color touchscreen makes operating the device extremely convenient and intuitive.Safe and environmentally friendlyThe built-in air purifier effectively filters the volatile organic compounds (VOCs) emitted during printing, making the printer safe to use even indoors. With its robust design and advanced features, the K2 Plus Combo meets the highest safety standards.Included3D printerCFS systemtouch screenscreen basespool holderfilamentPTFE cabletool kituser manual 3D printerManufacturerCrealityModelK2 Plus ComboPrinting technologyFDMPrint area350 x 350 x 350 mmPrinter dimensions495 x 515 x 640 mmWeight35 kgPrinting speed≤600 mm/secAcceleration≤30,000 mm/s²Printing Accuracy100 mm ± 0.1 mmLayer height0.05-0.3 mmExtruderDirect extruder with double gear driveFilament diameter1.75 mmNozzle diameter0.4 mmNozzle temperature≤ 350°CTable temperature≤ 120°CChamber temperature≤ 60°CWorking surfaceFlexible printing surfaceLeveling modeAutomatic levelingXYZ motorStepper motor with servo driveFile transferUSB / Ethernet / Wi-FiSupported file formatsGcode / 3MFInternal memory32 GB EMMCWi-Fi2.4 GHz / 5 GHzRFID sensoryesRated voltage100-240 V~ AC 50/60 HzDisplay screen4.3" color touch screenRated power1200 WSupported filamentsPLA / ABS / PETG / PA-CF / PLA-CF / PET / ASA / PPA-CFAI camera for monitoringStandardAI camera for calibrationStandardPower Loss RecoveryYesAutomatic filament feeding relayYesTangled filament detectionYesAir purifierYesInput ShapingYesLighting kitYesActive table tilt calibrationYesActive belt tensioningYesActive chamber heatingYesSupport for RFID filamentsYesSupported file formatsGcode / 3MFCompatibility with CFS systemYesNumber of CFS extensions≤ 4Cutting softwareCreality Print 5.0 or later versionsUser interface languagesEnglish, German, Spanish, French, Italian, Portuguese, Russian, Turkish, Japanese, Korean, Chinese CFS systemManufacturerCrealityNameCFSDimensions379 x 314 x 276 mmWeight4.56 kgNumber of filament slots4Drying methodDrying agentFilament bufferIN x4, OUT x1Number of extensions≤ 4RFID filament recognitionYesFilament diameter1.75 ± 0.05 mmSupported 3D printerK2 PlusConnection portCreality 485 x2Power supplyDC 24 V (no additional power supply required when connecting to K2 Plus)Rated power20 WStatus indicatorLight indicator (white/red) x 4DisplaySegmented LCD screen displaying temperature and humidityCompatibility of filament spoolsSpools 1 kg, spool diameter: 197-202 mm, spool thickness: 42-68 mmSupported filamentsPLA, PETG, ABS, ASA, PET, PLA-CF (Not compatible with flexible TPU, wet BVOH/PVA or deformed cardboard spools)Automatic filament feeding relayYes

AnyCubic Standard Resin (Gray)AnyCubic standard resin is distinguished by its excellent adhesion and durability. It is perfect even for novice users. It allows impressive printing speed and unmatched precision - great for highly detailed models. At the same time, it is very easy to clean.Exceptional durabilityBet on the perfect combination of strength and resilience. AnyCubic standard resin is distinguished by its hardness of about 85 HS, bending strength of 50-60 MPa and flexibility reaching 1400-1600 MPa. Its cleaning will also not cause you any problems. Using it, you also don't have to worry about unpleasant odors.Incredible precisionNow you can easily take care of even the smallest detail. The resin provides a casting precision of ± 0.2 mm - or you can control it within ± 0.1 mm, depending on the type of device you use. This makes it easy to print high-quality, detail-rich models!Fast printingDon't waste time on prolonged waiting for your model to be printed. The resin is distinguished by its excellent fluidity, so it dissolves quickly and allows you to shorten the printing process. Now your prints will be ready in no time!Wide compatibilityForget about compatibility problems. AnyCubic standard resin fits most popular LCD and DLP 3D printers. So you can create detailed prints no matter what equipment you have! ManufacturerAnyCubicModelSPTGY-104EColorGrayWavelength365-405 nmDensity1.13 g/cm3Viscosity200-230 cP / mPa⋅sSurface hardness84-86 HSTensile strength40-50 MPaMax. elongation to break12-16%Shrinkage4,5-5,5%Bending strength50-60 MPaFlexibility1400-1600 MPaMaintenance period18 monthsWeight1 kg

AnyCubic ABS-Like Resin 2 Pro (Black)The new formulation of AnyCubic ABS-Like Resin Pro 2 offers exceptional tensile strength and flexibility, increasing elongation at break by more than 100% compared to the previous version. These results make it ideal for printing high-strength components such as structural components, industrial prototypes and even fittings. The resin is also distinguished by its high durability, color saturation and low odor, making it comfortable to work with even in poorly ventilated areas.Increased durabilityABS-Like Resin Pro 2 features increased bending resistance, making it more resistant to cracking and mechanical damage. It is also easy to work with, allowing for precise molding of complex models and details.High precision and minimal shrinkageThanks to reduced shrinkage, the resin ensures high precision and retains sharp details during printing. Modeling shrinkage is much lower than with other resins, minimizing the risk of distortion.Wide compatibilityThe resin is compatible with a wide range of 3D printers operating in the UV wavelength range from 365 to 405 nm. This makes it easy to integrate with most DLP and LCD printers on the market. AnyCubic 2 Pro is also user- and environment-friendly - it provides a comfortable working environment as it does not emit an intense odor.High fluidity and lower viscosityThe resin's low viscosity leads to shorter curing times and makes it easier to form models, which promotes a faster and more efficient printing process. Improved adhesion to the printing platform effectively reduces the risk of printing failures. Enjoy greater precision and even better productivity in your work with AnyCubic! ManufacturerAnyCubicModel2ProColorBlackUV wavelength:365-405 nmDensity:1.05-1.25 g/cm³Viscosity:300-400 cPimPa-sHardness:82-84DTensile strength:35-40 MPaElongation at break:35-40%Shrinkage formability:4.3-5.6%Bending strength:35-40 MPaFlexural modulus:1400-1800 MPaHeat resistance temperature:60-65°CResin washing:AlcoholShelf life:1.5 years

Creality TPU Filament (White)Creality CR-TPU filament is a high-quality, highly flexible plastic that combines exceptional resilience with durability. Thanks to its soft structure and high adhesion, it is ideal for printing parts that require flexibility and resistance to deformation - such as cases, gaskets, handles or soles. The material is compatible with most FDM printers, including all Creality models.High flexibility and durabilityCR-TPU is distinguished by its excellent elasticity, which allows it to return to its original shape after bending, stretching or impact. The material is resistant to cracking, abrasion and wear, allowing the models to retain their properties even after long use.Soft and snug-fitting materialThe optimized TPU formula provides high adhesion and a soft texture, which increases adhesion between layers and ensures smooth, even surfaces. It's an ideal choice for models where flexibility and resistance to wear and tear are important, such as handles, cases and cushioning protective parts.Chemical and environmental resistanceCR-TPU exhibits high resistance to water, oils and solvents, making prints durable and not susceptible to chemical agents. The material does not absorb moisture, does not degrade under UV light and retains its properties over a wide temperature range. This means that it will perform well both indoors and outdoors, maintaining color and flexibility for a long time. ManufacturerCrealityNameCR-TPUModel3301040033ColorWhiteFilament diameter1.75 mm ±0.03 mmWeight1 kgDimensions210 × 210 × 75 mmPrinting temperatureFrom 210°C to 240°C

Das Creality Ender PLA Filament ist eine Serie von Filamenten, die Creality für den täglichen Gebrauch entwickelt hat. Perfekt, wenn man ein hochwertiges Filament in Standardfarben benötigt. Das Ender PLA Filament ist ein qualitativ hochwertiges 3D-Druckmaterial für den 1,75 mm 3D-Drucker.

Creality TPU Filament (Red)Creality CR-TPU filament is a high-quality, highly flexible plastic that combines exceptional resilience with durability. Thanks to its soft structure and high adhesion, it is ideal for printing parts that require flexibility and resistance to deformation - such as cases, gaskets, handles or soles. The material is compatible with most FDM printers, including all Creality models.High flexibility and durabilityCR-TPU is distinguished by its excellent elasticity, which allows it to return to its original shape after bending, stretching or impact. The material is resistant to cracking, abrasion and wear, allowing the models to retain their properties even after long use.Soft and snug-fitting materialThe optimized TPU formula provides high adhesion and a soft texture, which increases adhesion between layers and ensures smooth, even surfaces. It's an ideal choice for models where flexibility and resistance to wear and tear are important, such as handles, cases and cushioning protective parts.Chemical and environmental resistanceCR-TPU exhibits high resistance to water, oils and solvents, making prints durable and not susceptible to chemical agents. The material does not absorb moisture, does not degrade under UV light and retains its properties over a wide temperature range. This means that it will perform well both indoors and outdoors, maintaining color and flexibility for a long time. ManufacturerCrealityNameCR-TPUModel3301040034ColorRedFilament diameter1.75 mm ±0.03 mmWeight1 kgDimensions210 × 210 × 75 mmPrinting temperatureFrom 210°C to 240°C

HP ASA Creality Filament (Black)HP ASA's Creality filament is a material developed for applications requiring durability and reliability even in harsh environments. Thanks to its combination of high mechanical strength, UV resistance and ability to operate at high temperatures, it is ideal for printing technical and usable parts - also used outdoors. The material is fully compatible with most Creality 3D printers.UV and weather resistanceCreality HP ASA is distinguished by its exceptional stability in outdoor conditions. The filament effectively resists the effects of UV radiation, aging and corrosion. Models printed with ASA retain their color, gloss and shape even after prolonged exposure to the sun and rain, making them ideal for outdoor applications - such as housings, fixtures, structural components and decorations.High strength and impact resistanceThe filament is characterized by high hardness and resistance to cracking, which makes the prints rigid and durable. This makes it ideal for both functional models and parts subject to mechanical stress.Thermal resistance up to 100°CCompared to popular materials such as ABS or PETG, Creality HP ASA filament is distinguished by its higher thermal stability. The models retain their shape and properties even at temperatures as high as 100°C, allowing them to be used in more applications.High print speed of up to 200 mm/sCreality HP ASA filament is optimized for high-speed printing, reaching up to 200 mm/s. It provides smooth and stable feeding, without the risk of nozzle clogging, allowing you to shorten the turnaround time of your projects while maintaining the high surface quality of your models. ManufacturerCrealityNameHP-ASAModel3301100002ColorBlackFilament diameter1.75 mm ±0.03 mmWeight1000 gDimensions70 × 210 × 210 mmPrinting temperatureFrom 200°C to 300°CTable temperatureFrom 50°C to 100°CPrinting speed40-200 mm/sec

Miraco Pro'l on 32 GB RAM-mälu • Salvestab nii väikseid kui suuri objekte • Kirurgiline täpsus • Kasutustemperatuurid -10 °C kuni +40 °C • Kiire laadimine

Creality 3D-printeri niit Filament Hyper PLA RFID 1,75 mm 1kg lilla

Creality Sermoon X1 3D ScannerIf your goal is to digitally reproduce real objects with the highest possible accuracy, the Creality Sermoon X1 3D Scanner is the tool for you. This advanced 3D scanner was created for professionals—engineers, designers, reverse engineering specialists, as well as industrial and design applications where every detail matters. With its extremely precise measurements and extensive operating modes, it is the ideal choice when you need high-quality 3D data and work efficiency.Unmatched scanning accuracy and stabilityAt the heart of the Sermoon X1 is a high-precision scanning system that achieves accuracy of up to 0.02 mm, and with the use of built-in scaled photogrammetry, volumetric precision reaches 0.02 mm + 0.03 mm/m. These results meet the expectations of many technical and professional applications. In practice, this means that the scans faithfully reproduce the shape and actual dimensions of the object, which is crucial in quality control, CAD design, and reverse engineering.Wide working fieldThe use of proprietary optimization algorithms allows the Sermoon X1 scanner to offer an extremely large scanning field. Such a wide working area significantly reduces the need for markers, which translates into a faster, smoother, and more efficient scanning process. In line laser mode, the maximum field of view is 650 × 531 mm, while in infrared mode it reaches an impressive 1300 × 935 mm. Thanks to a hybrid system combining blue laser lines and structured infrared light, the Sermoon X1 supports a wide range of scanning sizes, from small 5 × 5 × 5 mm³ to large 4000 × 4000 × 4000 mm³.With details in mindThe X1's single-laser deep hole scanning mode allows you to easily capture 3D data from hard-to-reach areas such as deep holes, narrow gaps, and recesses. Support for scanning narrow holes with a depth-to-diameter ratio of up to 6:1 ensures more accurate 3D data acquisition, which is ideal for design, inspection, analysis, and more. The scanner is equipped with a high-performance Qualcomm ISP chip, a 2 MP full-color RGB camera, and additional lighting for richer and more realistic textures.Versatile operating modesThe Creality Sermoon X1 scanner offers several operating modes tailored to different tasks. Single laser lines are ideal for deep and narrow spaces that other systems cannot capture. The NIR mode with structured light allows for tagless scanning of even large items. Seven parallel laser lines are great for detailed scanning of technical surfaces, while 34 intersecting laser lines speed up the scanning of medium and large objects. This makes the X1 an extremely versatile tool in a professional workshop.Efficient work without compromiseProfessional projects require both precision and speed. The X1 achieves a scanning speed of up to 90 frames per second, and the system can capture millions of measurements per second in various operating modes. This means that even larger parts or complex geometries can be scanned in less time without losing detail quality. With advanced Wi-Fi 6 technology, the X1 scanner delivers fast, cable-free scanning and uncompromising battery life. It easily adapts to different measurement environments, giving you the freedom to scan anywhere.Compact design and comfortable to useThe one-piece optoelectronic body and lens mount, made of CNC-machined metal, combine high durability with a lightweight, refined design (weighing only 530 g). Its compact dimensions (216 × 74 × 51 mm) make the scanner mobile and easy to use, facilitating work in all conditions. The mechanical locking system effectively eliminates backlash and the risk of component dispersion, which has a direct impact on the repeatability and accuracy of scans. High-strength materials ensure excellent rigidity and vibration resistance, so that every scanning process is stable, precise, and reliable, even in demanding working conditions.Wide compatibilityThe Sermoon X1 scanner works with the advanced CrealityScan 4.0 scanning software, which facilitates the import of scans, their processing, and export to popular formats (STL, OBJ, PLY). This allows the prepared data to be used without hindrance in CAD/CAM programs for further design, analysis, or production. The intuitive interface and automatic point registration tools mean that even complex 3D models can be prepared with minimal time and effort.Safe operation in all conditionsThe scanner is designed for reliable operation in both workshop and outdoor conditions. The device works efficiently even in sunlight – in single or 7-line laser beam mode at light intensities up to 50,000 lux, and in 34 cross-line mode up to 100,000 lux. Importantly, scanning of black and metal surfaces can be performed without the need for matting sprays, which significantly speeds up work and increases comfort of use, especially in field applications.Intelligent stabilizationAn advanced stabilization system ensures smooth and precise scanning even during prolonged operation. Thanks to an AI-controlled temperature compensation algorithm and an efficient heat management system, the Sermoon X1 maintains stable output parameters throughout its operation. Combined with One-Shot 3D imaging technology, this solution increases object tracking stability, effectively reducing frame drops and data connection errors resulting from vibrations or movements, which translates into higher quality and consistency of scans.Included in the setscannerhigh-precision glass calibration platex2 measuring scalepower adapterUSB 3.0 cable (Type-C to Type-A)data cablecharging cablereflective marking points (D6 mm*40 sheets, D3 mm*40 sheets)manually tightened quick release cardmagnetic phone holderWi-Fi 6 adapterType-C power adaptercleaning clothheadbandwaterproof boxuser manual GeneralManufacturerCrealityModelSermoon X1Scanning modesDeep hole scanning, detailed scanning, fast scanning, markerless scanningMarker recognition enhancement12 blue LEDsLaser safetyClass II (safe for the eyes)Weight530 gDimensions216mm*74mm*51mmMechanical structureOptoelectronic bracket and lens base, CNC integrated molding, complete mechanical locking (better stability, longer service life)Calibration plateHigh-precision glass calibration plateWireless operationSupportedComputer configurationWindows: i7-Gen10 processor, Nvidia graphics card (8 GB VRAM), 32 GB RAM, Windows 10/11 (64-bit); Minimum requirements: i7-Gen7 processor, Nvidia graphics card (6 GB VRAM), 16 GB RAM, Windows 10/11 (64-bit); macOS: M1/M2/M3/M4 series processor, 16 GB RAMInterface modeUSB 3.0 × 1Input power12V, 3AOperating temperature-10°C to 40°COperating humidity10-90%RHCertificationsCE, RoHS, REACH, WEEE, FDA, FCC, UL, IC, RCM, PSE, SRRC, GB 4943.1 Single line scanning modeAccuracyUp to 0.02 mmVolume accuracy0.02 mm + 0.04 mm/m 0.02 mm + 0.03 mm/m (with scale)Scanning speed84,000 measurements per secondScanning speedUp to 90 frames per second3D resolution0.05-2mmPhotogrammetryPhotogrammetry mode (with 2x magnetic carbon fiber scale)Minimum scanning volume5mm x 5mm x 5mmSingle capture range215mm x 167mm@200mm, 325mm x 323mm@300mm, 434mm x 394mm@400mm, 542mm x 463mm@500mm, 650mm x 531mm@600mmWorking distance200mm-600mmColor mappingSupportedAlignment modeMarker / Global markerColored supplementary light12 white LEDsOutdoor scanningBelow 100,000 lux Scanning in 7 parallel laser line modeAccuracyUp to 0.02 mmVolume accuracy0.02 mm + 0.04 mm/m 0.02 mm + 0.03 mm/m (with scale)Scanning speed756,000 measurements per secondScanning rateUp to 90 frames per second3D resolution0.05-2mmPhotogrammetryPhotogrammetry mode (with 2x magnetic carbon fiber scale)Minimum scanning volume5mm x 5mm x 5mmSingle capture range215mm x 167mm@200mm, 325mm x 323mm@300mm, 434mm x 394mm@400mm, 542mm x 463mm@500mm, 650mm x 531mm@600mmWorking distance150mm-400mmColor mappingSupportedAlignment modeMarker / Global markerColored supplementary light12 white LEDsOutdoor scanningBelow 50,000 lux Scanning in 34 intersecting laser line modeAccuracyUp to 0.02 mmVolume accuracy0.02 mm + 0.04 mm/m 0.02 mm + 0.03 mm/m (with scale)Scanning speed1,734,000 measurements per secondScanning rateUp to 85 frames per second3D resolution0.05-2mmPhotogrammetryPhotogrammetry mode (with 2x magnetic carbon fiber scale)Minimum scanning volume5mm x 5mm x 5mmSingle capture range215mm x 167mm@200mm, 325mm x 323mm@300mm, 434mm x 394mm@400mm, 542mm x 463mm@500mm, 650mm x 531mm@600mmWorking distance200mm-600mmColor mappingSupportedAlignment modeMarker / Global markerColored fill light12 white LEDsOutdoor scanningBelow 100,000 lux Markerless scanning (NIR)AccuracyUp to 0.05 mmVolume accuracy0.05 mm + 0.1 mm/mScanning speed5,000,000 measurements per secondFrame rateUp to 30 frames per second3D resolution0.1-2 mmPhotogrammetryPhotogrammetry mode (with 2x magnetic carbon fiber scale)Minimum scan volume150mm x 150mm x 150mmSingle capture range650mm x 531mm at 600mm; 1300mm x 935mm at 1200mmWorking distance170mm-1200mmColor mappingSupportedAlignment modeMarker / Global marker / Geometry / TextureColor supplementary light12 white LEDsOutdoor scanningBelow 30,000 lux

QIDI Max 4 3D printerThe QIDI Max 4 is an advanced 3D printer designed for large projects and working with demanding materials. The large workspace, high head temperature, and active chamber heating allow you to print both standard filaments and engineering materials. The CoreXY design, fast closed-loop motors, and extensive cooling system ensure that the device works quickly, stably, and precisely.Large workspaceThe QIDI Max 4 offers a working area of 390 × 390 × 340 mm. Such a large print volume allows you to create large models in one piece without having to divide the project into smaller parts. This saves you time on assembly and maintains the strength of the finished model.High print head temperature for technical materialsThe print head reaches a temperature of up to 370°C, which allows you to work with a wide range of filaments – from PLA and PETG to more demanding materials such as PC or carbon fiber composites. The ceramic throat and improved heat dissipation module reduce the risk of nozzle clogging, keeping printing stable even at high temperatures.Active chamber heatingThe third generation of active chamber heating reaches temperatures of up to 65°C. Combined with the air circulation system, this creates a stable environment for printing materials that are prone to deformation. As a result, even large models made of PLA or ABS retain their geometry and do not curl at the edges.Very fast and precise printingThe use of FOC stepper motors in a closed loop increases drive efficiency by up to 65%. The maximum printing speed reaches 800 mm/s, and the acceleration reaches 30,000 mm/s². This configuration significantly reduces project completion time while maintaining high accuracy.Stable CoreXY designThe CoreXY motion system with 10 mm wide 1.5GT belts ensures high rigidity and accuracy of the head guidance. The X-axis uses a high-hardness linear guide, the Y-axis uses 12 mm steel shafts, and the Z-axis uses four guides and two independent motors with trapezoidal screws. This allows the printer to remain stable even with large and heavy models.Automatic leveling and print controlThe printer is equipped with automatic table leveling with a load cell sensor integrated into the hot end. The monitoring system includes a filament end sensor, an AI camera, and a print resume function after a power failure. This makes the printing process safer and requires less manual control.Air filtration and convenient operationThe QIDI Max 4 has a 3-stage air filtration system consisting of a G3 pre-filter, HEPA H12 filter, and activated coconut carbon. The printer is also equipped with a 5-inch touch screen, Wi-Fi and Ethernet connectivity, and a 1080p camera for viewing and recording timelapse footage of the printing process.IncludedFilament holder with pneumatic headFilament spool holderHolder coverCase door handleSpare parts kitMechanism maintenance oil7 mm wrenchPower cordEthernet cableUSB flash drive with software and filesFlat screwdriverAdhesive for the work surface to improve print adhesionSet of Allen keys (H1.27, H1.5, H2, H2.5, H3)Scraper for removing prints from the table ManufacturerQiDiModelMax 4Working area390 × 390 × 340 mmPrinter dimensions558 × 578 × 612 mmWeight40 kgMaximum head temperatureup to 370°CMaximum table temperatureup to 120°CChamber temperatureup to 65°C (active heating – 3rd generation)Maximum print speed800 mm/sMaximum acceleration30,000 mm/s²ExtruderDirect Drive, hardened steel double gearsSupported filamentsPLA, ABS, ASA, PETG, TPU, PA, PC, carbon fiber and glass fiber compositesFilament diameter1.75 mmMaterial flow40 mm³/sAutomatic levelingyes (load cell sensor in hotend)Filament sensorYes – filament end detectionAir filter3-in-1: G3 + HEPA H12 + activated carbonCamera1080p with timelapse supportConnectivityWi-Fi 2.4/5 GHz, Ethernet, USBMemory32 GB eMMC + USB 2.0Screen5" touchscreen 800 × 480Supported file formatsSTL, OBJ, 3MF, STEP, STPSoftwareQIDI Studio, OrcaSlicer, PrusaSlicer, and othersPower supply110V / 220–240V AC, 50/60 HzRated power150 W + 500 W (chamber heating) + 700 W (heating table)

3D plastikust Creality PLA+ Ender

Mit dem CR-PLA von Creality hat man die besten Voraussetzungen für einen einwandfreien und präzisen Druck. Das CR-PLA verfügt über eine hohe Festigkeit und Zähigkeit, was es weniger anfällig für Brüche macht. Es wird aus hochwertigen Rohstoffen hergestellt und eignet sich bestens für alle 1.75mm FFF 3D-Drucker

3D plastik Creality CR-PLA

GEMBIRD Filament Matte PLA Slate grey 1.75mm 1kg

Das Ender PLA Filament von Creality ist ein solides und kosteneffizientes Einsteiger-Filament, das zuverlässige Qualität und hohe Kompatibilität bietet. Mit hoher Zähigkeit und starker Kompressionsbeständigkeit ist es einfach in der Handhabung - für überzeugende Ergebnisse auf einer Vielzahl von 3D-Druckern. Dieses Set enthält zwei Rollen mit jeweils 1 Kilogramm weißem Filament.

3Doodler AB-MONO-250

Creality Hyper PLA Filament (Orange)Creality's Hyper PLA Filament stands out for its fast cooling and durability, while providing excellent precision. It's made from high-quality materials and is fantastic for a variety of applications - from creating figurines to device parts to prototypes. It allows fast, accurate printing and doesn't get tangled. It is ideal for use in conjunction with Creality printers. Users can also take advantage of the Creality Cloud service, which offers, among other things, plenty of free models for printing.Even faster printingThanks to its high fluidity and fast cooling, the filament enables printing speeds of up to 600 mm/s. In addition, the excellent stability ensures greater precision and produces better results. However, it doesn't stop there. Reliable control of the filament diameter and automatic winding system guarantee smoother printing and minimize the risk of tangling.DurabilityThe filament is distinguished by its high tensile strength (52.99 MPa) and bending strength (92.38 MPa), making the printed models more durable. Top-quality materials were used in its manufacture, and it underwent rigorous quality control. All this allows you to enjoy fantastic printing performance and excellent results.IncludedSpool with filamentDrying agentVacuum packaging ManufacturerCrealityNameHyper Series PLAModel3301010381ColorOrangeDiameter1.75 mm ± 0.3 mmWeight1 kgPrinting temperatureFrom 190°C to 230°CTable temperatureFrom 25°C to 60°CPrinting speed30-600 mm/secFan100%Density1.25 g/cm3Tensile strength (X-Y)52.88 MpaModulus of elasticity (X-Y)1146,064Elongation at break6,304%Flexural strength (X-Y)92.38 MpaFlexural modulus (X-Y)2490.178 MpaCharpy impact strength (X-Y)8.8344 kJ/m2Printing platformCarbon silicon, PEI board, textured paper, PVP adhesive

Creality Hyper PLA Filament (Beige)Creality's Hyper PLA Filament stands out for its fast cooling and durability, while providing excellent precision. It's made from high-quality materials and is fantastic for a variety of applications - from creating figurines to device parts to prototypes. It allows fast, accurate printing and doesn't get tangled. It is ideal for use in conjunction with Creality printers. Users can also take advantage of the Creality Cloud service, which offers, among other things, plenty of free models for printing.Even faster printingThanks to its high fluidity and fast cooling, the filament enables printing speeds of up to 600 mm/s. In addition, the excellent stability ensures greater precision and produces better results. However, it doesn't stop there. Reliable control of the filament diameter and automatic winding system guarantee smoother printing and minimize the risk of tangling.DurabilityThe filament is distinguished by its high tensile strength (52.99 MPa) and bending strength (92.38 MPa), making the printed models more durable. Top-quality materials were used in its manufacture, and it underwent rigorous quality control. All this allows you to enjoy fantastic printing performance and excellent results.IncludedSpool with filamentDrying agentVacuum packaging ManufacturerCrealityNameHyper Series PLAModel3301010378ColorBeigeDiameter1.75 mm ± 0.3 mmWeight1 kgPrinting temperatureFrom 190°C to 230°CTable temperatureFrom 25°C to 60°CPrinting speed30-600 mm/secFan100%Density1.25 g/cm3Tensile strength (X-Y)52.88 MpaModulus of elasticity (X-Y)1146,064Elongation at break6,304%Flexural strength (X-Y)92.38 MpaFlexural modulus (X-Y)2490.178 MpaCharpy impact strength (X-Y)8.8344 kJ/m2Printing platformCarbon silicon, PEI board, textured paper, PVP adhesive

Creality CR-Silk PLA Filament (Copper)Creality's CR-Silk filament features a metallic, elegant sheen, making it eye-catching and perfect for printing figurines, decorations and even jewelry. It also features impressive durability and compatibility with most Creality printers. What's more, durable yet environmentally friendly materials have been used to make it.Fast and trouble-free printingThanks to its careful winding, the filament allows for smooth, trouble-free printing at speeds of up to 100 mm/s. It is also resistant to tangling. This will save you time and avoid wasting materials!Elegant and durableThe filament is very pleasant to the touch and is distinguished by its elegant, delicate sheen - it allows you to achieve a pearly and smooth surface of the model without additional polishing. In addition, it was made of environmentally friendly, durable materials (PLA), making it resistant to deformation and distinguished by low shrinkage. Its tensile strength reaches 35 MPa, and its flexural strength is as high as 67 MPa. ManufacturerCrealityNameCR-Silk FilamentModel3301120002ColorCopperExtruder temperatureFrom 190°C to 230°CTable temperatureFrom no heat to 60°CPrinting speed40-100 mm/secTensile strength35 MPaBending strength67 MPaFilament diameter1.75 mmWeight1 kg

Creality CR-Silk PLA Filament (Purple)Creality's CR-Silk filament features a metallic, elegant sheen, making it eye-catching and perfect for printing figurines, decorations and even jewelry. It also features impressive durability and compatibility with most Creality printers. What's more, durable yet environmentally friendly materials have been used to make it.Fast and trouble-free printingThanks to its careful winding, the filament allows for smooth, trouble-free printing at speeds of up to 100 mm/s. It is also resistant to tangling. This will save you time and avoid wasting materials!Elegant and durableThe filament is very pleasant to the touch and is distinguished by its elegant, delicate sheen - it allows you to achieve a pearly and smooth surface of the model without additional polishing. In addition, it was made of environmentally friendly, durable materials (PLA), making it resistant to deformation and distinguished by low shrinkage. Its tensile strength reaches 35 MPa, and its flexural strength is as high as 67 MPa. ManufacturerCrealityNameCR-Silk FilamentModel3301120005ColorPurpleExtruder temperatureFrom 190°C to 230°CTable temperatureFrom no heating to 60°CPrinting speed40-100 mm/secTensile strength35 MPaBending strength67 MPaFilament diameter1.75 mmWeight1 kg

Creality CR-Silk PLA Filament (White)Creality's CR-Silk filament features a metallic, elegant sheen, making it eye-catching and perfect for printing figurines, decorations and even jewelry. It also features impressive durability and compatibility with most Creality printers. What's more, durable yet environmentally friendly materials have been used to make it.Fast and trouble-free printingThanks to its careful winding, the filament allows for smooth, trouble-free printing at speeds of up to 100 mm/s. It is also resistant to tangling. This will save you time and avoid wasting materials!Elegant and durableThe filament is very pleasant to the touch and is distinguished by an elegant, delicate sheen - it allows you to achieve a pearly and smooth surface of the model without additional polishing. In addition, it was made of environmentally friendly, durable materials (PLA), making it resistant to deformation and distinguished by low shrinkage. Its tensile strength reaches 35 MPa, and its flexural strength is as high as 67 MPa. ManufacturerCrealityNameCR-Silk FilamentModel3301120004ColorWhiteExtruder temperatureFrom 190°C to 230°CTable temperatureFrom no heating to 60°CPrinting speed40-100 mm/secTensile strength35 MPaBending strength67 MPaFilament diameter1.75 mmWeight1 kg

Creality CR-PETG Filament (Transparent Blue)Creality's PETG filament combines the advantages of PLA and ABS filaments. It is environmentally friendly and not prone to distortion, while enabling smooth and precise printing. It is also distinguished by its high strength and resistance to moisture, and its surface is eye-catching with a beautiful sheen. What's more, CR-PETG filament is compatible with most FDM Creality printers.High quality manufacturingThanks to the use of environmentally friendly PETG plastic, the filament is very durable and does not emit unpleasant odors. It also features a uniform diameter and resistance to moisture, distortion and cracking. In addition, its tensile strength reaches 49 MPa. An additional advantage of the filament is its beautiful, glossy surface - it is perfect for printing figurines and decorations, for example!Smooth printingThe filament allows smooth, fast and precise printing - without wrinkles and bubbles on the project. At the same time, it guarantees perfect flow and minimizes the risk of clogging the printer nozzle. So you can print your models without any problems and save precious time! ManufacturerCrealityNameCR-PETG 3D printer filamentModel3301030036ColorTransparent bluePrinting temperatureFrom 230°C to 250°CTensile strength49 MPaFilament diameter1.75 mmWeight1 kg

Printeri tüüp:3D pliiats; Printimise tehnoloogia:FFF (Fused Filament Fabrication); Trükimaterjali tüüp:PLA, ABS; Ekraan:On

Brother HSE211E

Elegoo Neptune 4 Plus 3D PrinterThe Elegoo Neptune 4 Plus is a versatile and powerful 3D printer that combines high print volume with high precision and speed. Its advanced technical features and intuitive operation make it an ideal choice for both beginners and experienced users who want the highest quality and reliability.High precision and speedThe printer features a printing precision of ±0.1 mm and a nozzle diameter of 0.4 mm, which guarantees the accuracy of design reproduction. Print speeds range from 30 to 500 mm/s, with an optimal speed of 250 mm/s. The maximum acceleration of 12,000 mm/s² allows for fast and efficient printing, which is especially useful for large projects.Impressive print volumeThe Neptune 4 Plus offers a maximum print volume of 320 × 320 × 385 mm. This workspace allows you to create large and complex models without having to split them into smaller pieces. This is perfect for projects that require a high degree of precision and detail. The Elegoo Neptune 4 Plus can operate at ambient temperatures from 5°C to 40°C, with a maximum nozzle temperature of 300°C and a heated bed reaching 110°C. These parameters make the printer versatile and capable of handling a variety of printing materials, including those requiring higher temperatures.Intuitive software and operationThe printer works with the popular Cura software, ensuring ease of preparing models for printing. It supports STL and OBJ input file formats, and the output is a G-code file. USB drive and network (LAN) interfaces make it easy to transfer data and control the printing process. The Elegoo Neptune 4 Plus is solidly built, measuring 578 x 533 x 640 mm and weighing 14.4 kg. It's a device that provides stability and reliability for everyday work, while not taking up too much space on your desk. ManufacturerElegooModelNeptune 4 PlusPrinter typeFDM (Fused Deposition Modeling)Maximum print volume320 x 320 x 385 (mm3)Printing precision±0.1 mmNozzle diameter0.4 mmPrinting speed30 ~ 500 mm/sNormal print speed250 mm/secMaximum acceleration12000mm/s2Ambient working temperature5°C~40°CMaximum nozzle temperature300°CMaximum heated bed temperature110SoftwareCuraInput file formatSTL, OBJOutput file formatG-codeInterfaceUSB drive, LAN (Network)Input power supply100-120V/220-240V; 50/60 HzOutput power24VSize of the device578 x 533 x 640 mmNet weight14.4 kg

Creality Hyper PLA-CF Filament (Dark roheline)

Creality Hyper PLA-CF Filament (must)

The Gembird 1.75 mm ABS filament is designed for high-quality 3D printing, allowing users to create durable and resilient objects with ease. With a melting temperature of 225 °C, this filament ensures a consistent melting process, enhancing print quality. The filament comes on a sizable 198 mm spool with a spool width of 67 mm, providing ample material for a variety of 3D printing projects. Weighing 1 kg and with a length of 400 m, this ABS filament is suitable for both hobbyist and professional applications, catering to a wide range of creative endeavors.

Gembird's ABS filament is designed for 3D printing enthusiasts who require reliable and consistent materials for their projects. With a filament diameter of 1.75 mm, this spool offers a melting temperature of 225 °C, ensuring excellent print quality and precision. Weighing 1 kg and measuring 400 m in length, this filament provides ample material for both large and small projects.

The Gembird 1.75 mm ABS filament is designed for fused filament fabrication 3D printing. This durable filament provides strength and resistance to impact, making it suitable for a variety of applications, from prototyping to creating intricate models. With a spool diameter of 198 mm and a weight of 1 kg, it offers a length of 400 m, ensuring long-lasting use for extended printing sessions. The optimal melting temperature of 225 °C ensures reliable extrusion for smooth printing experiences.

CR-Scan Raptor integreerib sinise laseri ja infrapunavalgusallikate uuendusliku kombinatsiooni, mis katab väikeste, keskmise suurusega ja suurte objektide skaneerimise, mis vastab erinevate tööstuslike 3D-skaneerimise stsenaariumide vajadustele.TähtsündmusedHübriidne sinine laser ja NIR

AnyCubic Tough Resin 2.0 (Black)AnyCubic resin is a unique plastic that exhibits increased strength. It is relatively flexible and resistant to cracking, making it possible to print miniature components and thin models as well. What's more, finished models made with this resin are less likely to be damaged, even after falling from heights. Tough Resin 2.0 was created with environmentally friendly ingredients that do not irritate or emit intense odors. It is compatible with most LCD 3D printers.The perfect choice for perfectionistsTough Resin 2.0 is perfect for prints that require more precision. It is suitable for printing in the wavelength range of 365nm to 405nm, allowing you to achieve optimal results. The resin also exhibits less shrinkage. As a result, your models are full of detail and their surface is perfectly finished - especially when used in conjunction with AnyCubic printers. Physical and Chemical Properties:UV wavelength:365-405 nmDensity:1.10-1.15 g/cm³Viscosity:450-500 cPimPa-sHardness:82-84DTensile strength:30-42 MPaExtension at fracture:60-72%Shrinkage at forming:5.1-6.2%Bending strength:42-52 MPaModulus of elasticity at bending:1500-2000 MPaHeat distortion resistance temperature:50-55°CExposure time for bottom layer:20-40sStandard exposure time:1.5-3s (for color screens 8s)Resin cleaning:AlcoholShelf life:1.5 yearsColorBlack Recommended Printing Parameters for Various Models of Anycubic 3D Printers (Photon Mono M3 Pro, Photon Mono 6K, Photon Ultra, etc.):Layer thickness:0.05 mmExposure time:1.5s to 3.6sNo-exposure time:1sExposure time of lower layers:20s to 35sNumber of lower layers:5-6Anti-aliasing:1Z Lift distance:5mm to 10mmZ Lift speed:2mm/s to 6mm/sZ Retract Speed:2mm/s do 6mm/s Download:Safety data sheet

2-in-1 laser engraving machine xTool F1 UltraThe xTool F1 Ultra is an innovative 2-in-1 laser engraver that combines 20W fiber laser and 20W diode laser technology. With this combination, the device is capable of engraving almost any material - from metal to wood and leather. Engraving speeds of up to 10000 mm/s and intelligent path planning algorithms allow for fast and precise execution of projects, regardless of their complexity.Unprecedented speed and efficiencyWith engraving speeds as fast as 10000 mm/s, the xTool F1 Ultra saves you time and maximizes production efficiency. The Auto Streamline™ function enables smooth batch processing on the conveyor belt, allowing you to make large batches of products quickly. Using the built-in 16 MP camera, the device automatically focuses and accurately fills areas for engraving.Advanced 2-in-1 technologyThe xTool F1 Ultra is a state-of-the-art device integrated with a 20W fiber and diode laser. This technology allows you to engrave and cut a wide range of materials. You can create engravings on metals, wood, acrylic, leather or plastics. The 3D Curve™ function allows you to engrave curved surfaces and rotary cylinder engraving with the RA2pro accessory.Large working areaThe F1 Ultra offers an impressive workspace among desktop fiber optic devices - 220 × 220 mm, expandable to 220 × 500 mm with an automatic conveyor belt. With this space, you can easily complete projects that require a large engraving area, such as mass production, personalized gifts or ornaments.Safety and comfort at workWith a fully enclosed design and an eye-protecting cover, the F1 Ultra ensures safe operation in all conditions. An effective smoke and dust extraction system ensures clean air in the workplace, which is invaluable in long production cycles. In addition, the device's quiet operation allows you to focus on your tasks without distracting noise.Intelligent software and AIIntegrated xTool XCS software and the Material EasySet™ feature allow quick parameter selection for more than 500 materials. AI supports design by offering automatic vector creation, and the 3X Fast Finish function ensures optimized engraving paths. You can edit designs on multiple devices at the same time, facilitating teamwork and personalization.The perfect tool for your businessThe xTool F1 Ultra will work well for a wide range of applications, such as jewelry manufacturing, on-site personalization, mass production and branding. With the support of a community of over 22,000 users and access to 6,000 free designs on the DesignFind platform, growing your business has never been easier.IncludedxTool F1 Ultra x1Touchscreen controller x1Tube x1Power adapter x1Power cable x1USB cable x1Panel with slats x1L-shaped positioning element x1Material kit x1Wrench x1Lint-free cloth x1Screwdriver x1Instruction manual x1 ManufacturerxToolModelP5010342Exclusive technologyAutomatic production enhancement, 3D curve engraving, pixel algorithm for HD photo printingWorking area220*220 mmLaser power and laser source20 W fiber laser + 20 W diode laserFocus adjustmentAutomatic focus with manual camera focus (two point alignment)Max. working speed10000 mm/sLaser spot size0.08 * 0.1 mm (20 W diode laser), 0.03 * 0.03 mm (20 W fiber laser)PreviewCamera preview, live light fast previewPreview speedRectangle: 24000 mm/s, Contour: 16000 mm/sSoftwarexTool Creative Space / LightburnPre-assembledYesBuilt-in cameraYesProduct size273*373*492 mmProduct weight14.7 kgConnectionWiFi and USBSupported filesSVG / DXF / JPG / JPEG / PNG / BMP etc.Supported systemsAndroid / iOS / iPad / Windows / macOSInput25V 11A

4-in-1 xTool M1 Ultra 20W Laser Engraver - Deluxe KitThe xTool M1 Ultra 20W is a unique 4-in-1 laser engraver that combines the functions of a laser, cutter, inkjet printer and automatic drawing. The deluxe kit includes all the necessary accessories to get you started right away: 4 cutting tools, a set of colored markers, an inkjet printer module, a starter kit, a Smart Air Assist system, a honeycomb mesh base, a fire safety kit, and a RA2 Pro 4-in-1 rotary module. This versatile device is perfect for craft creators, small businesses and DIY enthusiasts.Multitasking at the highest levelThe xTool M1 Ultra supports four modes of operation: laser engraving and cutting, knife cutting and foiling, inkjet printing and automatic drawing. In one device, you have access to the full set of tools you need for a wide variety of projects. With Easy Swap™ technology implemented, it takes just 3 seconds to change modules, allowing you to work quickly and smoothly without the need for other devices.Support for more than 1,000 materialsThe M1 Ultra allows you to work with a wide range of materials - from wood and paper to acrylic to canvas, leather and 3D surfaces. Thanks to the 20W laser, you can cut even thick materials, such as 10mm linden wood. This device will work well for both precision art work and larger craft projects.Precision and speed of operationWith a maximum working speed of 400 mm/s, the M1 Ultra delivers efficient and accurate results. The Snapshot Preview function allows you to preview your design before you start working, and Pin-point™ Positioning technology guarantees precise positioning. Every cut and engraving is executed with incredible accuracy, eliminating the risk of errors.Intuitive design with Artimind AIThe integrated Artimind AI function makes designing easy even for those without experience. With intelligent shape recognition and intuitive xTool Creative Space software, you can quickly create your own designs or use pre-made templates. The software supports multiple devices such as computers, tablets and smartphones, giving you complete freedom to work.Security and compact designThe xTool M1 Ultra is compact in size (620 × 498 × 178 mm) and weighs 12 kg, so it can easily fit into any studio. With Class 1 Laser Safety certification, you are assured of safe operation for the user. Robust construction and thoughtful design ensure durability and reliability for years to come.IncludedCutting tool x4Color pen set x1Inkjet printer module x1Set of starter materials x1Smart Air Assist x1Honeycomb mesh base x1Fire safety kit x1RA2 Pro 4-in-1 rotary module x1 ManufacturerxToolModelM1U-DBProduct dimensions620mm*498mm*178mmProduct weight12kgProcessing modeLaser mode, blade mode, inkjet printing, pen drawing, multi-mode processingWorking areaLaser mode: 300mm*300mm, blade mode: 300mm*300mm, 295mm*295mm for cutting blade, pen mode: 300mm*300mm, inkjet mode: 296mm*286mmMaximum working speed400 mm/sLaser powerDiode laser 10 W / 20 WMaximum laser cutting capacity10W: 6mm linden wood panel, 20W: 10mm linden wood panelMaximum cutting capacity of the bladePrecision blade: 1.5mm, cutting blade: 2.5mmBuilt-in cameraNoPreviewShutter preview, crop previewPositioningPin-point™ positioningSafety classificationClass 1 laser safetySupported SoftwarexTool Creative SpaceConnectionUSB / Wi-FiSupported systemAndroid / iOS / iPad / Windows / macOSSupported filesSVG, DXF, JPG, JPEG, PNG, BMP, etc.

Anycubic High Speed PLA Filament 1 KG (White).Meet High Speed PLA filament from Anycubic, designed for lightning-fast 3D printing. Thanks to an innovative core optimized for high speeds, the material allows you to print at speeds of up to 500 mm/s, which, combined with a compatible printer, can give you up to ten times the speed of standard designs. Don't sacrifice quality - finished models maintain precise edges and crisp details, even with the most elaborate structures.Smoothness and precision of each layerThe secret to flawless prints is the optimized composition of PLA (polylactide, is one of the most popular materials used for 3D printing), which ensures exceptional smoothness of the filament feed and instant cooling of each applied layer. The filament flows evenly through the nozzle, and rapid solidification prevents deformation. In addition, Anycubic filament guarantees printing precision of ±0.02mm. The result is perfectly smoothed surfaces and sharply rendered parts, even for complex details or shapes.Seamless print runWhen working with Anycubic filament, you don't have to worry about downtime or blockages. The fiber's constant diameter and stable structure guarantee the continuity of the material, eliminating the risk of shortages or clustering inside the print head. This ensures that every print runs smoothly - from the first layer to the last.Versatile compatibilityWhether you're using a modern, high-speed printer or a classic model, Anycubic filament will fit your needs. The uniform, seamless structure with controlled diameter tolerance makes the material completely tangle-resistant and ready to work in any device on the market.Safe useTo maintain consistent quality and avoid possible blockages, be sure to heat the printer head to at least 230 °C before installing the filament. This will ensure that the material will flow without hindrance, giving you peace of mind and smoothness during any, even the most intensive printing. GeneralManufacturerAnycubicModelIPHPLCG-106ColorWhiteMaterialPLADimensions1.75 mmWeight1 kgVolume1.26 g/cm³Elongation at break12%Melting point of the filament165℃Heat distortion temperature56℃Accuracy±0.02mmLength330 mTensile strength54MPaBending strength74MPaIzod impact strength46J/mMelting index4-69/10minStorage environmentDry and ventilated Recommended printer parametersNozzle temperature190-210°C (50-150mm/s) | 210-230°C (150-300mm/s) | 230-260°C (300-600mm/s)Printer platform materialFine magnetic stickerSurface treatment of the printing platformNot requiredPrinter platform temperature50-60°CCooling fan100%Printing speed40-250mm/secPull-in speed50mm/secRecommended materialPVADrying temperature50°C

Schneller 3D-Druck, beeindruckende Ergebnisse: Das CR-PLA Matte Avocado Green von Creality zeichnet sich besonders durch seine matte Oberfläche aus. Die bedruckte Oberfläche dieses 3D-Filaments streut das Licht und verleiht gedruckten Objekten ein mattes Aussehen - für einen eleganten und professionellen Look mit angenehmer Textur. Diese Rolle enthält 1 Kilogramm Filament in hellgrün.