Wall-mountable showcase case, ATX form factor, designed for custom water cooling, vertical GPU mounting, radiator up to 360 mm, graphics cards up to 400 mm in length.
The DIGITUS wall-mounted data communications cabinet is equipped with a glazed door and a cable gland in the roof and floor. The steel structure is made of steel sheet up to 1.5 mm thick. It is possible to change the side of the door hinges and adjust the depth. The rack cabinets are delivered unassembled, in a flat package. Assembly is carried out in a few simple steps thanks to the enclosed "step-by-step" instructions. Installation cabinet supplied unassembled Quick installation Door opening angle: 200° 1-point locking on front door 483 mm (19") rack profiles mounted at the front inside the cabinet, galvanized 483 mm (19") rack profiles with depth adjustment 1.1-1.5 thick, high-strength sheet steel, powder-coated Cable inlet with brush strip in the roof and plastic cover in the floor Ventilation slots for active and passive air supply and exhaust Front door: glass, single Side panels: on two sides Assembled: no
We create solutions that make a difference in everyday lifeQoltec's SSD Drive Pocket is the ideal solution for those looking for mobile and easy-to-use data storage options, and is an interesting alternative, not only for those with documents or private files on disks, but also for small businesses wishing to archive their computer data without investing in other costly solutions.Data transfer of up to 10GB/sThe M.2 drive enclosure from Qoltec is a: suitable for M.2 SSD NVMe with M-Key and SATA with B+M-Key with sizes: 2230, 2242, 2260, 2280, UASP support, allows multiple commands to be executed at the same time, OTG support, works with laptops and smartphones USB 3.1 Gen2 interface enables data transfer at a speed of 10 Gb/s, device is compatible with USB 3.1 Gen1 and USB 2.0, LED indicates copy status, Single M.2 drive supports up to 2TB, Useful when there is no other way to connect an SSD, USB cable included, no need to install drivers, simply plug into a USB port and use thanks to the simplicity of the Plug&Play function. Maximum mobility in an elegant aluminium housingThe compact and handy enclosure for your M.2 SSD is a stylish protection for your valuable data. The case is made of high-quality aluminium, which further helps to dissipate heat. The compact size of the enclosure will allow you to take it with you to work or wine places, the pocket fits easily into a backpack. The durable enclosure provides effective protection against crushing and prevents any damage to the drive.Support for M.2 SATA and NVME drivesTo install the SSD, you don't need any special tools, just unscrew and slide out the case, insert the drive accordingly and slide it back into the case and screw it on. After connecting the pocket to the device of your choice, you are ready to go, the device is ready to operate.
Diese PCIe 4.0 x16>4xSFF-8639 NVMe Karte von Delock erweitert den PC um vier SFF-8639 Anschlüsse. An diese Ports können z. B. SSDs mit U.2 Anschluss angeschlossen werden. Die Karte benötigt die PCIe Gabelung (Bifurcation) Funktion des Mainboards, um das PCIe Signal aufzuteilen, wenn mehrere Anschlüsse belegt werden.
Lenkrad-Basis für Racing-Simulatoren, realistische Bewegungen durch 25 Nm starken Motor, verzögerungsfreie Wiedergabe, Quick-Release für Lenkräder, fast vollständig aus Metall
External SSD/HDD 2.5 inches case EC600 USB3.2A The EC600 2.5 SATA HDD/SSD enclosure is an environmental friendly drive enclosure that extends the service life of old drives when consumers upgrade their systems. Do your part for the planet by simultaneously reducing electronic waste and carbon emissions!
Perfect for precise typing: The 50 g actuation force and tactile feedback point provide a pleasant yet noticeable typing experience, ideal for long typing sessions and gaming. Tactile, crisp keystroke: The Panda switches offer distinct tactile feedback with every keypress, minimizing accidental activations. Each box contains 36 switches: You need two packs for keyboards up to 65% and three packs for 75% to 100% layouts. Suitable for 5-pin hot-swap keyboards and Cherry MX-compatible keycaps. Glorious Panda Standard: Tactile mechanical switch for demanding users The Glorious Panda switches are among the most legendary tactile switches on the market and are often described as one of the best options for fans of tactile feedback. These 5-pin switches offer a pronounced tactile bump at the beginning of the keystroke, intensifying the typing feel and ensuring a quick return. With an actuation force of 50 g and an actuation point at 2.5 mm, they offer a balanced combination of precision and responsiveness. The combination of nylon for a stable base, polycarbonate for a rigid housing, and POM for a smooth stem ensures that every keystroke is solid and stable. Factory lubrication enhances the smoothness of the switches and delivers the popular "thock" sound that keyboard enthusiasts appreciate. Unlike linear switches, the Glorious Panda switches provide clear, tactile feedback when the actuation point is reached. With their medium actuation force of 50 g, they allow for a balanced and stable typing feel, which is especially suitable for precise typing and controlled gaming. The 2.5 mm actuation height provides a pleasant and accurate feedback with every keystroke. The Panda switches are SMD LED compatible and can be highlighted by illuminated keycaps. Since the housing is frosty white and not fully transparent, the RGB brightness is slightly muted as the light is diffusely dispersed. However, they are compatible with Cherry MX keycaps. Installation in Glorious GMMK keyboards is effortless. These switches can also be used in mechanical keyboards with hot-swap sockets for 5-pin switches. Each box contains 36 switches, so you need to get the right amount for your custom keyboard. For 60% and 65% layouts, you need two packs, and for 75%, 80%, and 100% layouts, three packs. The Glorious Panda switches offer flexibility and a unique tactile typing experience.
Wall-mountable showcase case, ATX form factor, designed for custom water cooling, vertical GPU mounting, up to 360 mm radiator, graphics cards up to 400 mm in length.
The der8enchtable is a collaboration between Thermal Grizzly, Jon “elmor” Sandström (ElmorLabs), and Roman “der8auer” Hartung. In addition to the features of a standard benchtable—such as integrated mounts for radiators and a power supply—the der8enchtable includes a base unit with an integrated printed circuit board (PCB) for connecting the hardware under test. For consistent test results, fans can be controlled via three fan controllers, each providing three 4-pin fan headers. Each fan zone can be switched independently to 50% or 100% speed, supplies 3 A of power to the fans, and is protected by its own fuse. Additionally, the der8enchtable’s fan zones can be managed externally by the motherboard. Professional benchtable with active PCB Developed in collaboration with ElmorLabs and der8auer 3+1 control zones for fans and AIOs Supports SSD, USB, or microSD for OS and test software Compact, modular, and user-friendly frame design Compatible with air and AIO coolers A-RGB lighting In addition to the fan-control zones, the base unit with integrated PCB offers a secondary control zone with two 4-pin headers for pumps or fans, featuring the same control options as the fan zones. The pump zone supplies 3 A per port—6 A total—and each port has its own fuse. Peripherals can be connected to the der8enchtable via USB (4× Type-A, 2× Type-C). Testing and benchmarking hardware typically requires drivers, a BIOS, or an operating system. To simplify this, storage media can be mounted directly on the benchtable. Up to two 2.5-inch SSDs can be installed on the PCB, and the PCB also provides four microSD card slots—a cost-effective alternative to solid-state drives (SSDs) in terms of price per gigabyte. The test motherboard is connected to the der8enchtable via the 9-pin USB header. The der8enchtable itself is powered by the PSU via a PCIe 6-pin cable. For control of the addressable RGB lighting (aRGB), the der8enchtable can be connected to the motherboard via a 3-pin header. Alternatively, an external RGB controller may be used (not included). A power button and reset function are also provided on the PCB and wired to the motherboard. The der8enchtable’s PCB features preinstalled standoffs for ATX motherboards, which can be reconfigured for Micro-ATX and Mini-ITX boards. On the lower section of the black-anodized aluminum frame, a power supply can be mounted, and a custom-cuttable Velcro strap is provided for cable management. If the lower frame section is not needed, the feet can be attached directly to the base unit with integrated PCB, making the der8enchtable significantly more compact. Port Overview: 1× 9-pin USB header (data connection to motherboard) 1× PCIe 6-pin header (power supply from PSU) 1× 4-pin header (for PWM signal to external fan control) 3× Fan Zones (each with 3× 4-pin fan headers) 1× Pump Zone (2× 4-pin pump headers) 4× MicroSD slots for memory cards 2× On-board SATA connectors 2× SATA out connectors 4× USB 2.0 Type-A (max. 500 mA) 2× USB 2.0 Type-C (max. 3 A) 1× 2-pin header for power button 1× 2-pin header for reset button 1× 3-pin aRGB header (GND / – / D / 5V)
Tootekood: DY460 WHITE + 4 FANSGTIN: 4711527006159Varia2
Darkflash DY460 computer case (White) + 4 ARGB fansThe Darkflash DY460 case will allow you to build not only a powerful, but also a great-looking computer. It combines tempered glass panels with a vertical dual-chamber layout, so you can install many different components in it and display them in an interesting way. The model allows rear mounting of selected motherboards, provides space for heatsinks up to 360 mm, and has a built-in USB-C 3.2 Gen 2 port. The compact dimensions (452 x 238 x 541 mm) hide a spacious compartment that can accommodate a graphics card up to 400 mm long and CPU cooling up to 185 mm high. In addition, you'll find four ARGB fans included.Unprecedented cooling performanceThe case allows the installation of up to 10 120 mm fans, providing excellent airflow for the most demanding components. It is also possible to install a 360 mm heatsink on the top or 120/240 mm on the rear. Also noteworthy are the numerous ventilation holes. All this means that you can play AAA games or use demanding software without worry - your computer will not overheat. The kit includes four ARGB fans.Wide expansion possibilitiesBuild a computer perfectly suited to your needs. The Darkflash DY460 case allows you to install a graphics card up to 400 mm horizontally or up to 385 mm vertically (using optional mounting accessories, which are not included). You can also accommodate one SSD and two HDDs. In addition, back-connect mounting of ATX and M-ATX motherboards is possible, which simplifies cable management and improves the aesthetics of the entire setup.Useful portsThe built-in USB-C 3.2 Gen 2 port with up to 10 Gbit/s enables lightning-fast data transfers - useful for graphic designers, video editors, photographers and more. In addition, you'll find USB-A 3.0 and HD Audio connectors on the case, as well as Power and Reset buttons. This makes using the computer convenient and hassle-free!Delightful designTempered glass on three sides of the case provides a 330° panoramic view of the computer's interior, perfectly displaying selected components - such as those with RGB backlighting. Such a solution makes each configuration a real desktop ornament. What's more, the case was created from durable 0.8 mm thick SPCC steel and is effectively protected against dust - it will serve you well for many years.IncludedComputer caseFan x4 ManufacturerDarkflashModelDY460Housing typeBig TowerSide panelTempered glassMotherboard standardATX, M-ATX, ITXPower supply standardATX at the bottomSlots for internal drives3.5" HDD x2, 2.5" SSD x1Expansion card slots7Max graphics card lengthHorizontal mounting: 400 m; Vertical mounting: 385 mm;Max CPU cooling height185 mmMax number of fans10Fan mounting optionsSide: 120 mm x3; Rear: 120 mm x1; Top: 120 mm x3; Bottom: 120 mm x3;Water cooling mounting optionsTop: 360 mm; Rear: 120 mm / 140 mm;Number of fans installed4Type of fansARGBButtons and controlsPower, ResetConnectorsUSB-C 3.2 Gen 2 x1, USB-A 3.0 x1, HD audioMaterial0.8 mm SPCCColorWhiteHeight541 mmWidth238 mmDepth452 mm
Tootekood: F1 BLACK + 6 FANSGTIN: 4711527006081Varia2
Darkflash F1 computer case (Black) + 6 fansDarkflash F1 is a midi tower computer case created for gamers and custom build enthusiasts. Its modern design with a large tempered glass panel allows to display components in an interesting way and looks great on gaming workstations. It is also distinguished by its spacious interior, which can easily accommodate selected components. It is a combination of elegant design and practical solutions that make assembling and using the computer a real pleasure. The kit also includes six ARGB fans.Spacious interiorDespite its compact size (436 x 240 x 436 mm), the case offers plenty of space for components. It will accommodate graphics cards up to 350 mm in length and CPU coolers up to 200 mm in height. There are also five slots for expansion cards. You can also fit an M-ATX or ITX motherboard and three HDDs or SSDs. So you can easily build both a high-performance gaming PC and a workstation for creative work.Efficient coolingThe Darkflash F1 case supports extensive cooling systems - both air and water. It allows the installation of up to nine fans or a 360/280 mm heatsink. In addition, holes located on the top and rear panels ensure optimal airflow. So you can play dynamic games or use demanding programs without worrying that your computer will overheat! In addition, you will find six ARGB fans in the set, which not only guarantee effective cooling, but also look great - they will give your configuration a unique character.Useful connectors at your disposalA set of useful connectors - two USB-A 3.0 ports, one USB-C port and HD Audio - is located at the bottom of the case. So you can freely connect peripherals, transfer files or use headphones! This makes everyday computer use even more convenient, whether you are gaming, working or streaming.Solid construction and designThe case is made of high-quality SPCC steel with a thickness of 0.8 mm, which guarantees its durability and stability. In addition, tempered glass panels expose the interior, and the whole unit looks extremely modern - a solution that looks great on a gamer's desk and beyond.IncludedComputer caseFan x6 ManufacturerDarkflashModelF1Housing typeMidi TowerSide panelTempered glassMotherboard standardM-ATX, ITXSlots for internal drives3.5" HDD x3, 2.5" SSD x3Expansion card slots5Max PSU length200 mmMax length of graphics card350 mmMax height of CPU cooler200 mmMax number of fans9Fan mounting optionsSide: 120 mm x2; Rear: 120 mm x1/140 mm x1; Top: 120 mm x3/140 mm x2; Bottom: 120 mm x3;Water cooling mounting optionsTop: 360 mm / 280 mmNumber of fans installed6Type of fansARGBButtons and controlsPower, ResetConnectorsUSB-A 3.0 x2, USB-C x1, HD audioMaterial0.8 mm SPCCColorBlackHeight436 mmWidth240 mmDepth436 mm
