HPE StoreEver TapeAssure Advanced software provides an intuitive, easy to use dashboard, and advanced analytics for performance, health and utilization of tape drives, libraries and cartridges. TapeAssure Advanced software is fully integrated into HPE StoreEver Command View Tape Library (CV-TL) software providing single pane of glass management, multi-library manageability, monitoring, usage, performance and analytics. HPE tape libraries and software solutions offer a simple, easy to use visual dashboard to quickly identify all aspects of the library and its components.
HPE StoreEver Data Verification Software provides the ability to periodically scan and validate the quality of data on LTO tape cartridges stored in a tape archive. Periodically scanning infrequently accessed tapes archives to verify the data integrity so that a successful restore is possible when that critical business data is needed. StoreEver Data Verification Software is fully integrated into the HPE StoreEver Command View Tape Library Software and TapeAssure Advanced Software providing a single pane of glass for management, multi-library manageability, and proactive notification of health, usage, and life of the library, media, and tape drives.
EcoFlow Alternator Charger 500W chargerThe EcoFlow Alternator Charger 500W is a car charger that allows you to quickly recharge your power station while driving. It uses excess energy from the vehicle's alternator to deliver up to 500 watts of power, allowing 1 kWh of energy to be replenished in just 2.1 hours. It works 5 times faster than standard car cigarette lighter sockets. The device combines three functions - charging, battery maintenance and starting assistance. In addition, it can be controlled directly from the vehicle's multimedia system screen thanks to integration with Apple CarPlay and Android Auto.Three modes of operationThe EcoFlow Alternator Charger offers three modes of operation, which can be switched between using the EcoFlow mobile app. Charging mode is used to recharge the portable power station. Reverse Charging mode allows you to use the stored energy to recharge the starter or RV battery. Maintenance mode (Battery Maintenance) keeps the vehicle's battery in good shape by supplying low current to it and preventing it from discharging.Simple and quick installationThe product is designed for easy installation - the entire installation is done in three steps. The compact housing allows the device to be placed discreetly inside the vehicle. The wires are connected to the battery and the metal part of the body, which acts as grounding. Note, however, that when using the XT60 cable (a standard connector for EcoFlow stations), it is necessary to manually turn on the device and activate charging in the app - so it is advisable to avoid installation in hard-to-reach places.Compatibility with multiple devicesCompatibility with EcoFlow's RIVER series portable power stations, as well as EcoFlow DELTA 3, EcoFlow DELTA 3 Plus models, and EcoFlow GLACIER series refrigerators and EcoFlow WAVE air conditioners allows for freedom of use. The charger will also work well with third-party stations. You'll use it in SUVs, pickups and RVs alike. Note: the XT60 cable is included, which only allows standard charging of the power station. To use the reverse charging function (i.e., charging the battery from the energy storage) and battery maintenance, you will need to purchase the XT150 cable and use it with a compatible station from the EcoFlow DELTA series.Intuitive control from the carThe EcoFlow Alternator Charger is the first on the market to offer full integration with vehicle infotainment systems (on-board systems that combine navigation, multimedia and vehicle diagnostic data). With support for Apple CarPlay and Android Auto, you can control charging directly from the car's screen. The EcoFlow app allows you to check the current energy level, charging power or switch modes - all without reaching for your phone, increasing safety while driving.Full operational safetyThe GaN (gallium nitride) technology used by EcoFlow Alternator Charger features high temperature resistance and higher energy efficiency. The charger is equipped with a number of protections, including against reverse polarity, current overload, short circuit, overvoltage and under-voltage.Operation in all conditionsThe device is designed for use in variable climatic conditions. It can operate at temperatures from -20°C to 60°C, and its components can withstand humidity up to 95%. In storage mode, it can withstand even extreme conditions of -30°C to 70°C, making it suitable for longer expeditions and seasonal storage.Included:Car chargerInput cable (5m)XT60 output cable (1 m)Fuse wireMounting plateCable routing bracketM5 screwScrew M6Nut M6Screw ST5.5User manual and warranty card ManufacturerEcoFlowManufacturer code5022201001Dimensions242 × 194 × 35 mmWeight1.6 kgBluetooth2402 MHz - 2480 MHzOutput power < 10 dBmWi-Fi2412 MHz - 2472 MHzOutput power 18.22 dBmCharging mode (from alternator to station)Input: 12 V / 24 V (11 V - 31 V), 45 A max.Output: 40 V - 60 V, max. 500 W; at 24 V, max. 360 WReverse charging mode (from station to battery)Input: 40 V - 60 V, max. 13.2 AOutput: 13.8 V / 27.6 V, 500 W max.Battery maintenance modeInput: 40 V - 60 V, max. 3 AOutput: 13.8 V / 27.6 V, max. 100 WTypes of protectionReverse polarity protection (protects against incorrect polarity connection)Overcurrent protection (against overcurrent)Short-circuit protectionOvervoltage protection (protects against too high voltage)Under-voltage protection (protects the battery from over-discharge)Fuse125 AOperating temperatureFrom -20°C to 60°CStorage temperatureFrom -30°C to 70°COperating and storage humidity≤ 95%
EcoFlow EV-stream Delta Pro 3 adapterThe EcoFlow EV X-Stream adapter allows you to charge your DELTA Pro 3 power station with a Level 2 electric car charging station. It offers power up to 7200 watts and is compatible with SAE J1772 connectors. You can use it almost anywhere in the world without any problem! It's ideal for DELTA Pro 3 station users who want to charge quickly and conveniently at home or on the road.Charging speed you can count onWith AC charging support of up to 7200 watts, the adapter allows you to quickly prepare your DELTA Pro 3 station for further use - whether in the garage or at a stop during a trip. It's a time-saver and a convenience, especially when you need an efficient power source in the field.Wide compatibilityThe adapter supports a Type 1 connector (SAE J1772), which means you can connect the DELTA Pro 3 station to thousands of Level 2 chargers available worldwide. This makes it easy to get ready even for longer trips!Compact design and solid workmanshipThe cable length of about 49 cm makes the adapter very easy to store and transport. Thanks to its compact design, the accessory will fit even in the glove compartment of your vehicle, and the durable housing ensures safety during daily use. ManufacturerEcoFlowNameEV X-Stream AdapterModel5009604002AC input120 V / 240 V, 30 AAC output120 V / 240 V, 30 ALength490 mmCompatibilityEcoFlow DELTA Pro 3
