Tootekood: AIR 100 LITE (B)GTIN: 4710562740691Varia2
Small midi tower with tempered glass on the side, up to eight fans, space for a radiator up to 280mm, motherboards up to Micro-ATX, GPU up to 330mm and CPU cooler up to 161mm in height, up to four drives possible, two 120mm fans includedSmall case with tempered glass side panel Efficient cooling options with up to eight fans and radiators up to 280mm Support for motherboards up to Micro-ATX Space for graphics cards up to 330mm and CPU coolers with a height of up to 161mm Up to four drives possible Two 120mm fans included The Montech AIR 100 LITE: Minimalist case with high cooling performance The Montech AIR 100 LITE is the smaller variant of the Montech AIR 100 and impresses with its lightweight and minimalist design. Nevertheless, this midi tower offers extensive options for installing your hardware - particularly a variety of fans to keep your system cool. Well-cooled with fans and radiators Despite its small size, up to eight fans can be installed in the tower. The front supports a maximum of three 120mm or two 140mm fans. You can install two 120mm or 140mm fans at the top. A further 120mm fan can be installed at the rear, as well as up to two more 120mm fans above the power supply chamber. Two 120mm fans are already included at the front and rear. If you prefer water cooling - whether an all-in-one water cooler or a custom-built water cooling system - there are several locations where a radiator can be installed. The front supports a radiator up to a maximum of 280mm, the top supports a 240mm radiator, and another 120mm radiator can be installed at the rear. Hardware options The midi tower supports the installation of graphics cards up to 330mm in size. Motherboards up to Micro-ATX format are feasible. The CPU cooler should not exceed a height of 161mm. To store programs and games, up to four drives can be installed.
The Lian Li Vector V100 combines a stylish yet minimalist design with high compatibility and a special cutout for extra individuality. With this desktop case, you get the perfect frame for your next gaming PC. Black midi-tower with tempered glass on the side and front Supports motherboards up to ATX form factor and with back-connect design Optimal cooling with up to nine fans and radiator support up to 360 mm Room for graphics cards up to 415 mm and CPU coolers up to 180 mm in height Four 120 mm RGB fans included Cutout with removable cover for collectibles The Lian Li Vector V100: A midi-tower with stylish design and plenty of space for hardware With the Vector V100, you can express your personality. Thanks to tempered glass on the side and front, you have an unobstructed view inside your tower, while the LED strips are just the beginning of impressive RGB lighting. Make your build something special Directly behind the front of the V100 case is a cutout. Whether for figures or other collectibles – you can showcase your interests here. If you don't need the cutout, you can simply cover it with the removable lid. Extensive cooling options Four 120 mm ARGB fans are pre-installed in the case – three reverse fans on the side and one standard fan at the rear. Thanks to their reverse fan blades, the side-mounted fans provide efficient airflow – and look just like regular fans. Additional options for installing extra fans can be found on the top and bottom. If you prefer water cooling, you can also install a radiator up to 360 mm on the top. The dust filter at the bottom is easy to remove, so you can clean it whenever necessary. Easy installation of your gaming hardware The Vector V100 offers ample space for your components – even high-end hardware. Thanks to support for motherboards with back-connect design and tidy cable management, you’ll make your build a real eye-catcher.
Conceptronic DONN19G. Ühenduvustehnoloogia: Juhtmega ühendatud, Hostiliides: USB 3.2 Gen 1 (3.1 Gen 1) Type-C, USB Power Delivery kuni: 100 W. Toote värv: Hall, Ühilduvad mälukaardid: MicroSD (TransFlash), SD, Andmeedastuskiirus: ...
Transform the ambiance of any system with the CORSAIR LS350 Aurora RGB lighting kit. Featuring two 35 cm RGB LED strips, this kit illuminates with vibrant colors to create a visually stunning setup. The magnetic installation simplifies positioning, while the included iCUE to ARGB adapter cable and 40 cm 3-pin extension cables ensure a seamless connection. Compatible with ASUS Aura Sync, GIGABYTE RGB Fusion 2.0, ASRock Polychrome Sync, and MSI Mystic Light, the LS350 is designed to mesh with popular RGB ecosystems. With 40 RGB LEDs in each strip, customize the lighting to match personal style or synchronize it with other components for an enhanced gaming experience.
Small case for simple systems Two low-profile expansion slots for graphics cards Supports ITX-sized motherboards and CPU cooler height up to 38 mm Power supply: 1U Flex up to 150 mm One USB-C port on the I/O panel The Jonsbo NV10 in detail The Jonsbo NV10 is a small case that can be placed on a desk thanks to its lightweight design, and its simple black aesthetic fits into any setup. You can connect an external device to the USB-C port on the I/O panel. Hardware options The mini-tower supports installing ITX-sized motherboards. The CPU cooler should not exceed a height of 38 mm. The two low-profile expansion slots allow the installation of a low-profile graphics card up to 190 mm in length. When it comes to the power supply, only a 1U Flex power supply is supported, which should not be larger than 150 mm.
The Jonsplus Z20 Mesh is a stylish and functional Micro-ATX case designed especially for PC enthusiasts who value a compact design and optimal cooling. With its mesh front and side panel, it offers excellent airflow. Mesh front and side panels for optimal cooling Compact size, including carrying handle – Perfect for portability Supports graphics cards up to 363 mm in length for high-end GPUs USB 3.1 Type-C front port for fast data transfer Compact dimensions save space without compromising on performance Efficient Cooling and Modern Design The Z20 Mesh is specifically engineered for top-notch airflow, ensuring efficient cooling of your components. Thanks to its well-thought-out mesh panels and optimized airflow, your PC system will stay cool and powerful even under heavy loads. Take advantage of high compatibility in a compact form factor. The case provides space for large GPUs, powerful cooling systems, and cable management without appearing bulky. Versatile Compatibility and Easy Installation This case supports both Mini-ITX and Micro-ATX motherboards and offers flexible mounting options for various hardware configurations. The well-designed interior makes installation and cable management easy. User-Friendly Front Ports With a USB 3.1 Type-C port, a USB 3.0 Type-A port, as well as audio and microphone jacks on the front, the Z20 Mesh gives you quick and convenient access to crucial interfaces for your peripherals. The integrated carrying handle makes the Z20 Mesh perfect for easy transportation – ideal for LAN parties, events, or flexible setups.
MSI PRO SHIELD M100P. Formfaktor: Midi Tower, Type: PC, Produktfarve: Sort. Bagerste ventilatorer installeret: 1x 80 mm, Understøttede diametre for bagerste ventilatorer: 80,90 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 166 mm, Dybde: 312 mm, Højde: 354 mm. Pakkevægt: 3,58 kg
Midi tower with optimized airflow, mesh front, compatible with up to E-ATX, 195 mm CPU cooler height clearance, radiator support up to 360 mm, SimpliCable cable management & magnetic panels The HAVN BF 360 is perfect for gamers and hardware enthusiasts who don’t want to compromise: solid cooling performance, smart design, and full compatibility. With aerodynamically optimized airflow, a flexible interior, and clever SimpliCable cable management, this case provides the perfect foundation for your high-end build.Airflow cover for targeted cooling of GPU and CPUSpace for up to seven fans or two 360mm radiatorsCompatible with E-ATX motherboards up to 277 mm wideGPU bracket & 410 mm space – ready for RTX 50 SeriesMagnetic panels & SimpliCable – quick maintenance & clean cable managementHAVN BF 360HAVN BF 360: Airflow meets styleThe front features a distinctive ribbed mesh that draws air in precisely and reduces flow losses. An integrated guide with a 135° angle directs fresh airflow straight onto the GPU and CPU – for maximum cooling without heat buildup. Flexible mounts for fans or radiators are included, whether you prefer air or water cooling.HAVN BF 360 side viewCooling power for your high-end hardwareThere is room for up to seven fans: 3x front, 3x top, and 1x rear. Alternatively, you can install radiators up to 420 mm at the front. With 195 mm CPU cooler height clearance and a spacious interior, you have plenty of room for large air coolers or custom loops. Anti-vibration rubber mounts on every bracket ensure whisper-quiet operation at maximum performance.HAVN BF 360 rear side viewCompatibility without compromisesThe BF 360 offers enough space for motherboards up to E-ATX (max. 277 mm). There’s a generous 410 mm of room for graphics cards – suitable for current RTX and Radeon powerhouses.The integrated, adjustable GPU bracket reliably prevents GPU sag. Power supplies up to 200 mm fit in the lower compartment without restrictions. Two modular drive trays can hold either 2x 2.5-inch or 1x 3.5-inch drives – naturally vibration-damped for quiet operation.HAVN BF 360 rear motherboard traySimpliCable & magnetic panels – smart & stress-freeSimpliCable provides pre-made cable routes, straps, and wide channels for super-fast and tidy cable management. The front and top panels are magnetically attached, with rubberized grip edges and a practical pull strap – maintenance and upgrades have never been so easy.HAVN BF 360 I/O panelModern I/O panel for your setupThe I/O includes a USB 3.2 Gen 2 Type-C, two USB 3.2 Gen 2 Type-A ports, and an HD audio jack – perfect for your peripherals and headsets. With the BF 360, you’re well equipped for the future, whether for gaming or as a workstation.
Midi tower with optimized airflow, mesh front, compatible with up to E-ATX, 195 mm CPU cooler height, radiator support up to 360 mm, SimpliCable cable management & magnetic panels The HAVN BF 360 is perfect for gamers and hardware enthusiasts who want no compromises: robust cooling performance, smart design, and full compatibility. With aerodynamically optimized airflow, a flexible interior, and innovative SimpliCable cable management, this case provides the perfect foundation for your high-end build.Airflow cover for targeted cooling of GPU and CPUSpace for up to seven fans or two 360 mm radiatorsCompatible with E-ATX motherboards up to 277 mm wideGPU bracket & 410 mm clearance – ready for RTX 50 SeriesMagnetic panels & SimpliCable – quick maintenance & clean cable managementHAVN BF 360HAVN BF 360: Airflow meets styleThe front features a distinctive ribbed mesh that draws in air precisely and reduces flow resistance. An integrated guide with a 135° angle directs fresh airflow straight to the GPU and CPU – for maximum cooling without heat buildup. Flexible mounts for fans or radiators support both air and water cooling solutions.HAVN BF 360 side viewCooling power for your high-end hardwareThe interior accommodates up to seven fans. Alternatively, you can install radiators up to 420 mm at the front. With clearance for CPU coolers up to 195 mm tall and a spacious interior, there is plenty of room for large air coolers or custom water-cooling loops. Anti-vibration rubber mounts on every bracket ensure whisper-quiet operation at peak performance.HAVN BF 360 side rearCompatibility without compromiseThe BF 360 offers ample space for motherboards up to E-ATX (maximum 277 mm wide). It provides a generous 410 mm clearance for graphics cards – perfect for current RTX and Radeon models.The integrated, adjustable GPU bracket reliably prevents GPU sag. Power supplies up to 200 mm fit in the lower compartment without restrictions. Two modular drive trays can accommodate either 2x 2.5-inch or 1x 3.5-inch drives – all vibration-damped for quiet operation.HAVN BF 360 rear motherboard traySimpliCable & magnetic panels – smart & stress-freeWith SimpliCable, you get pre-defined cable routes, straps, and wide channels for super-fast and tidy cable management. The front and top panels are magnetically attached, with rubberized grip edges and a practical pull tab – maintenance and upgrades have never been so effortless.HAVN BF 360 I/O panelModern I/O panel for your setupThe I/O includes a USB 3.2 Gen 2 Type-C port, two USB 3.2 Gen 2 Type-A ports, and an HD audio jack – perfect for your peripherals and headsets. With the BF 360, you’re ready for the future, whether gaming or working.
Midi tower with airflow optimization, mesh front, compatible up to E-ATX, 195 mm CPU cooler height, radiator support up to 360 mm, SimpliCable cable management & magnetic panels, three pre-installed fans The HAVN BF 360 Flow is ideal for gamers and hardware enthusiasts who demand no compromises: solid cooling performance, smart design, and full compatibility. With aerodynamically optimized airflow, a flexible interior, and clever SimpliCable cable management, this case provides the perfect foundation for your high-end build.Airflow cover for targeted cooling of GPU and CPUThree pre-installed fans: 2x 180 mm & 1x 140 mmCompatible with E-ATX motherboards up to 277 mm wideGPU bracket & 410 mm space – ready for RTX 50 SeriesMagnetic panels & SimpliCable – quick maintenance & clean cable managementHAVN BF 360 FlowHAVN BF 360 Flow: Airflow meets styleThe front features a distinctive ribbed mesh that draws in air precisely and reduces flow loss. An integrated guide with a 135° angle directs fresh airflow straight onto the GPU and CPU – providing maximum cooling without heat buildup. Flexible mounts for fans or radiators are included, supporting both air and water cooling solutions.HAVN BF 360 Flow side viewCooling power for your high-end hardwareUp to six fans can be installed. The three pre-installed fans deliver plenty of fresh air right out of the box. Alternatively, radiators up to 360 mm can be mounted at the front and top. With a CPU cooler height of 195 mm and a spacious interior, there’s ample room for large air coolers or custom water cooling loops. Anti-vibration rubber mounts on every bracket ensure whisper-quiet operation, even at peak performance.HAVN BF 360 Flow rear side viewCompatibility without compromiseThe BF 360 offers enough space for motherboards up to E-ATX (max. 277 mm). There’s a generous 410 mm clearance for graphics cards – perfect for current RTX and Radeon powerhouses.The integrated, adjustable GPU bracket reliably prevents GPU sag. Power supplies up to 200 mm fit in the lower compartment without restriction. Two modular drive trays can accommodate either 2x 2.5-inch or 1x 3.5-inch drives – all vibration-damped for quiet operation.HAVN BF 360 Flow rear motherboard traySimpliCable & magnetic panels – smart & stress-freeWith SimpliCable, you benefit from pre-routed cables, straps, and wide channels for super-fast and tidy cable management. The front and top panels are magnetically attached, with rubberized grips and a practical pull tab – maintenance and upgrades have never been easier.HAVN BF 360 Flow I/O panelModern I/O panel for your setupThe I/O includes a USB 3.2 Gen 2 Type-C, two USB 3.2 Gen 2 Type-A ports, and an HD audio jack – perfect for your peripherals and headsets. With the BF 360, you’re well equipped for the future, whether you’re gaming or working.
Midi tower with optimized airflow, mesh front, compatible with up to E-ATX motherboards, 195 mm CPU cooler height, radiator support up to 360 mm, SimpliCable cable management & magnetic panels, three pre-installed fans The HAVN BF 360 Flow is ideal for gamers and hardware enthusiasts who accept no compromises: solid cooling performance, smart design, and full compatibility. Aerodynamically optimized airflow, a flexible interior, and clever SimpliCable cable management make this case the perfect foundation for your high-end build.Airflow cover for targeted cooling of GPU and CPUThree pre-installed fans: 2x 180 mm & 1x 140 mmCompatible with E-ATX motherboards up to 277 mm wideGPU support bracket & 410 mm clearance – ready for RTX 50 SeriesMagnetic panels & SimpliCable – quick maintenance & tidy cable managementHAVN BF 360 FlowHAVN BF 360 Flow: Airflow meets styleThe front features a striking ribbed mesh that precisely draws in air and reduces flow loss. An integrated 135° guide directs cool air directly onto the GPU and CPU for optimal cooling without heat buildup. Flexible mounts for fans or radiators are included, suitable for both air and water cooling configurations.HAVN BF 360 Flow side viewCooling power for your high-end hardwareThere is space for up to six fans. The three pre-installed fans ensure a strong supply of fresh air right out of the box. Alternatively, radiators up to 360 mm can be installed at the front and top. With 195 mm of CPU cooler height clearance and a spacious interior, you have enough room for large air coolers or custom water loops. Anti-vibration rubber mounts on every bracket ensure whisper-quiet operation at peak performance.HAVN BF 360 Flow side rearCompatibility without compromiseThe BF 360 offers ample space for motherboards up to E-ATX (max. 277 mm). There’s a generous 410 mm of clearance for graphics cards – perfect for the latest RTX and Radeon powerhouses.The integrated, adjustable GPU bracket reliably prevents GPU sag. Power supplies up to 200 mm fit comfortably in the lower compartment. Two modular drive trays can hold either 2x 2.5-inch or 1x 3.5-inch drives – all vibration-damped for quiet operation.HAVN BF 360 Flow rear motherboard traySimpliCable & magnetic panels – smart & stress-freeWith SimpliCable, you get pre-configured cable routing, straps, and wide channels for ultra-fast, tidy cable management. The front and top panels attach magnetically, with rubberized grip edges and a handy pull strap – maintenance and upgrades have never been so easy.HAVN BF 360 Flow I/O panelModern I/O panel for your setupThe I/O panel features a USB 3.2 Gen 2 Type-C, two USB 3.2 Gen 2 Type-A ports, and an HD audio jack – perfect for your peripherals and headsets. This means the BF 360 is fully equipped for the future, whether as a gaming rig or workstation.
The HYTE X50 is a stylish midi-tower case designed for discerning PC enthusiasts who want to combine design and function. With its innovative internal structure and high-quality craftsmanship, it targets gamers, streamers, and builders with an eye for detail. Three-chamber layout separates heat sources for optimal airflow Supports up to ten 120 mm RGB fans for outstanding cooling performance 360 mm radiator support on both top and bottom for powerful water cooling Mesh front and side panels ensure optimal fresh air intake Magnetic cable management system for effortless, clean builds HYTE X50: Innovative cooling concept with clear separation The HYTE X50 uses an intelligent three-chamber design that physically separates the GPU, motherboard, and power supply. This creates unobstructed airflow that efficiently expels heat from the case. The direct stream of fresh air onto your graphics card keeps it cool even during graphics-intensive gaming or 3D rendering, consistently supplying it with air. Design meets functionality The case impresses with a curved side mesh panel that reliably supplies your system with air. Its clean, symmetrical design is not only eye-catching but also thoughtfully constructed. Radiators up to 360 mm can be installed at the top and bottom, so even high-end water cooling systems fit with ease. Modular interior and easy installation Building your system is made extremely simple thanks to thoughtful details like magnetically closing cable guides, tool-free front and side panels, and flexible mounts. Additionally, the USB-C port on the front provides lightning-fast access with up to 20 Gbit/s—perfect for modern peripherals and rapid data transfers.
Three-Chamber Design for Maximum Thermal Performance Dedicated CPU cooling chamber Two airflow channels for efficient circulation in the main compartment Two curved French-door tempered glass panels Compatible with motherboards featuring reversed connectors RapidRoute 2.0 cable management system Three RS-R 120mm PWM ARGB fans with reversed blades THREE IS BETTER THAN TWOTHREE-CHAMBER DESIGN The unique three-chamber layout isolates hot components, providing efficient cooling and peak performance in any situation. Separate chambers for the CPU, GPU/motherboard, and PSU, cables, and storage deliver superior thermals and simplify the building process. WORLD-CLASS ENGINEERINGUNMATCHED PERFORMANCE Designed from the ground up by our world-class engineers, the AIR 5400 case is a masterpiece of precision, performance, and thoughtful design. BIG GRAPHICS CARDS WELCOMEOPTIMAL AIRFLOW TO THE GPU The spacious interior is designed to accommodate even the most powerful graphics cards. Two dedicated airflow channels direct cool air over the GPU for maximum performance. UNLOCK THE VIEWARGB FANS WITH REVERSED BLADES Factory-installed RS-R ARGB 120mm fans with reversed blades at the bottom of the case provide efficient, quiet cooling with stunning, uninterrupted RGB lighting. Fans can be daisy-chained and connected to the motherboards PWM and +5V RGB headers for easy control of lighting and fan speed. STUNNING VISUALSTWO CURVED FRENCH-STYLE GLASS DOORS Two glass panels meet at the corner and swing outward on hidden hinges, offering a seamless appearance and easy access to hardware. ADVANCED CABLE MANAGEMENTRAPIDROUTE 2.0 RapidRoute 2.0 makes cable management effortless. The motherboard tray with a perforated wall allows cable ties to be repositioned easily, keeping your build neat and organized. MULTIPLE COOLING OPTIONS The AIR 5400 comes with three 120mm intake fans with reversed blades at the bottom and provides seven times more space in the CPU chamber, top, and rear, ensuring highly efficient airflow in both chambers. MODERN FRONT I/O PANEL Provides easy access to ports, including a USB 3.2 Gen 2 Type-C, two USB 3.2 Gen 1 Type-A ports, and integrated 3.5mm audio and microphone jacks.
Product kirjeldus: CORSAIR iCUE 5000X RGB - Torn - ATX Product Type: System cabinet Form Factor: Torn värv: valge I/O Ühendusi: 2 x USB 3.0 1 x USB-C 3.1 1 x headphone/microphone Supported Motherboards: ATX, microATX, Extended ATX, ITX System Cabinet Features: Side panel dust filter, top panel dust filter, front dust filter, Direct Airflow Path design, toetab 120 mm radiator in rear, tempered glass side panel, PSU dust filters, tempered glass front panel, tempered glass top panel, toetab 280/360 mm radiator in front panel, toetab 280/360 mm radiator in top panel, RGB lighting system, removable dust filters Power Device: No toiteplokk Specification Compliance: ATX mõõtmed (WxDxH): 24.5 cm x 52 cm x 52 cm kaal: 13.84 kg Manufacturer Warranty: 2-year garantii
No. of drive bays: 4 Dimensions: Product dimension: (L x W x H) 407 x 215 x 455 mm Weight: 5.39 Other features: PCI expension slots: 7 Dust filter: 1 x top, 1 x bottom(PSU), 1 x front Fans control by: Motherboardremote controllerLED buttonVoice control/ Fans included: 4 x 120 mm ARGB, 6 pin, 1200 RPM (3 x front, 1 x rear) connected to the controller Fan support: front: 3 x 120/140 mm lub 2 x 200 mm rear: 1 x 120 mm top: 2 x 120 (140) mm bottom: 2 x 120 mm Watercooling support: front: 1 x 120/240/360 mm rear: 1 x 120 mm top: 1 x 120/240 mm Product dimension: (L x W x H) 407 x 215 x 455 mm Chassis material: SPCC 0.6 mm Front Panel Material: Big hole mesh Net/gross weight: 5.39 / 6.04 kg
