Arvutitark OÜ

The external network card AXAGON ADE-25RC easily converts a USB-C 3.2 Gen 1 (USB 3.0) port into a 2.5 Gigabit Ethernet port. It is compatible with 10/100/1000/2500 Mbit/s transfer speeds. The 2.5 Gb/s network adapter expands a computer with a very fast and stable network connection, adds a missing RJ-45 network connector, adds another network card, or replaces the original non-functional network connection. In addition to 2.5 gigabit throughput, the LAN adapter offers a wide range of features, such as IPv4/IPv6 checksum offload to reduce CPU load from checksums, crossover detection and auto-correction, TCP large send offload, support for various Wake-on-LAN modes, operation with virtual LANs (VLAN), and advanced power management features. The advantage of the IEEE 802.3bz standard is that standard Cat 5e and Cat 6 Ethernet cables up to 100 m in length can be used for 2.5 Gb/s speed. The metal adapter housing is made of aluminum and provides excellent mechanical protection and very good heat dissipation. Thanks to its compact dimensions and minimal weight, it is an ideal accessory for laptops. Support for current versions of Windows, macOS, and Linux operating systems allows it to be used with any desktop PC, laptop, or ultrabook equipped with a modern reversible USB Type-C connector. In modern operating systems from Windows 8.1 onward, the adapter allows easy automatic installation without the need for an Internet connection. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 and USB 2.0. Compatible with Thunderbolt 3 and 4. Supports transmission rates of 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). USB Type-C male connector on a permanently attached cable 15 cm in length. Output: Gigabit Ethernet interface with RJ-45 connector for connecting UTP or STP cable. Supported transmission rates for the Ethernet interface: 10/100/1000/2500 Mb/s. Supported specifications: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3bz 2.5GBase-T. 10/100/1000/2500 Mb/s auto-detection. NBASE-T specification support - allows speeds up to 2.5 Gbps over standard UTP Cat5e cables. Supports IPv4 / IPv6 packet Checksum Offload Engine (COE) to reduce processor load, including IPv4 IP/TCP/UDP/ICMP/ IGMP & IPv6 TCP/UDP/ICMPv6 checksum control and generation. Supports TCP Large Send Offload V1 and V2. Supports IEEE 802.1P Layer 2 priority encoding & decoding. Supports IEEE 802.1Q VLAN tagging. Supports IEEE 802.3az EEE (Energy Efficient Ethernet) - reduces power consumption when idle. Supports Jumbo frame. Supports full-duplex transmission with IEEE 802.3x flow control and half-duplex transmission with back-pressure flow control. Supports Auto MDI/MDIX - crossover detection and auto-correction eliminate the need for crossover cables. Supports hardware Cyclic Redundancy Check (CRC) to detect transmission errors. Supports Pair Swap/Polarity/Skew Correction. Other features: Full Plug and Play and Hot Plug support. Supports CDC-ECM for automatic driver installation across different OSs. Adapter power supply via USB (bus power) - no external power supply required. Two LEDs indicate network activity and the adapter's connection to the network. Dimensions: 64 x 24 x 14 mm. Weight: 26 g (incl. cable). USB cable length: 15 cm. The Realtek RTL8156B chipset is used. Wake-on-LAN feature support in different modes: Supports sleep mode and remote Wake Up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection, and Link Change Wake-up. Supports the ECMA-393 proxZzzy standard for sleeping hosts to manage the network connection of sleeping guests using proxy servers. RealWoW! technology support allows remote wake-up over the Internet. Advanced Power Management features:The adapter supports advanced power management to reduce losses during standby or light traffic on the network. It also supports advanced power saving when the Ethernet cable has been disconnected. Supports Advanced Configuration Power Management Interface (ACPI). Supports Power Management offload (ARP & NS). Supports Microsoft Always On Always Connected (AOAC). Supports Intel Converged Platform Power Management (CPPM). Supports Link Power Management (LPM). Supports Operating System-directed Power Management (OSPM). Supports IEEE 802.3az EEE (Energy Efficient Ethernet). Supported OS: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32-bit and 64-bit versions of Windows OS are supported), MacOS X 10.6 and later, Linux with kernel 2.6.14 and later. Package contains: 2.5 Gigabit Ethernet adapter with fixed 15 cm long USB-C cable, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in cardboard.

Premium AXAGON BUCM-AM15AB HQ USB 2.0 USB-C to USB-A data and charging cable with USB-C male and USB-A male connectors. The cable is designed for data synchronization and charging of phones, tablets, and other mobile devices. It supports data transfer speeds of up to 480 Mb/s and charging current of up to 3A. The cable is compatible with Quick Charge, Samsung AFC, Huawei FCP, SMART, and other charging technologies. This durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface, and gold-plated contacts. The cable conductors are made of tin-plated oxygen-free copper. High-quality cable insulation made of flexible TPE guarantees maximum durability while maintaining sufficient flexibility. The nylon braid provides the cable's final strength. A practical strap for easy cable packing is an added bonus. 22AWG power wires (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. 30AWG data wires, together with high-quality shielding, ensure reliable data transmission. Double shielding protects transmitted signals from adverse interference. The nylon braid in combination with a strain relief significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: USB-C (M) male USB-A (M) male Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and charging of the mobile device battery. USB 2.0 compatible with USB 1.1. Supports 480 / 12 / 1.5 Mb/s (High / Full / Low speed) transmission rates. Supports high-speed charging with current up to 3A. Supported charging technologies: Qualcomm Quick Charge 2.0/3.0, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging, and others. The cable includes 22AWG power wires and 30AWG data wires. Tin-plated oxygen-free copper conductors reduce oxidation, increase conductivity, and provide a clear signal without distortion. Shielding via galvanized foil and oxygen-free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for mobile phones and smartphones, tablets, power banks, cameras, and other mobile devices with a USB-C connector. Other data: cable length 1.5 m, cable outer diameter 4 mm. Package contains: USB-C M USB-A M black cable, tightening strap, packed in a printed and sealed foil package with hanging hole.

Twisted USB-C to USB-C data and charging AXAGON BUCM-CM10TB TWISTER USB 2.0 cable with USB-C male connectors on both ends. The cable is designed for fast data transfer and charging of notebooks, phones, tablets, and other mobile devices. It supports data transfer speeds up to 480 Mb/s and charging current up to 3A. This durable data and charging cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface, and gold-plated contacts. The cable conductors are made of tin-plated oxygen-free copper. High-quality cable insulation made of flexible TPE guarantees maximum durability while maintaining sufficient flexibility. Thanks to the twisted coiled design, the cable takes up minimal space and is an ideal accessory for the car. In its shortened state, the cable is only 35 cm long and does not get in the way. When stretched, it comfortably reaches 60 cm from the socket. 22AWG power wires (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. The cable also supports notebook charging using Power Delivery 60W technology. 30AWG data wires, together with high-quality shielding, ensure reliable data transmission. Double shielding protects transmitted signals from adverse interference. The durable cable strain relief reduces dangerous cable bending. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: USB-C (M) male USB-C (M) male Other Features: DATA SYNC & FAST CHARGING - simultaneous data transfer and charging of the mobile device battery. USB 2.0, compatible with USB 1.1. Supports 480 / 12 / 1.5 Mb/s (High / Full / Low speed) transmission rates. Supports high-speed charging with current up to 3A. Supported charging technologies: Power Delivery 60W (20V/3A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging, and others. The cable includes 22AWG power wires and 30AWG data wires. Tin-plated oxygen-free copper conductors reduce oxidation, increase conductivity, and ensure a clear signal without distortion. Shielding with galvanized foil and oxygen-free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for notebooks, mobile phones and smartphones, tablets, power banks, and other mobile devices with a USB-C connector. Other data: cable length 60 cm when stretched, 35 cm when shortened, 4.2 mm outer diameter. Package contains: USB-C M to USB-C M twisted black cable, packed in a printed and sealed foil package with hanging hole.

Premium connection USB-C USB-C Data and Charging AXAGON BUCM2-CM10AB CHARGE cable with USB-C male connectors at both ends. The cable is designed especially for charging and powering computers, monitors, laptops, phones, tablets and other devices. It also supports data transfer speeds of up to 480 Mb/s. The cable has implemented the latest specification of Power Delivery 3.1 charging technology. This technology delivers, among other things, a power output of 240W which is more than double that of Power delivery 3.0, which delivers 100W. You can use not only the (Standard Power Range SPR) for voltages of 5, 9, 15 and 20V with a current of 5A, but also sufficient power in fixed voltages of 28, 36 and 48V with a maximum current of 5A (Extended Power Range - EPR). Thanks to the new PD 3.1 technology, you can also use the cable to power devices with much more power, such as gaming laptops, 4K monitors, power tools or the increasingly popular e-scooters. To identify the cable and its current capabilities, the cable has an integrated E-Mark chip. The cable is also compatible with Quick Charge, PPS, Samsung AFC and SFC, Apple, SMART and other charging technologies. Durable, extended-life bidirectional cable features metal terminals, nickel-plated connectors and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The final strength of the cable is provided by the nylon braid. The bonus is a practical strip for easy packing of the cable. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 30AWG together with high-quality shielding, ensure reliable data transmission. Double shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: 2x USB-C (M) male. Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and charging of the connected device. USB 480Mbps (USB 2.0), compatible with USB 1.1. Supports 480 / 12 / 1.5 Mb/s transmission rates. Supported charging technologies: Power Delivery 2.0/3.0/3.1 - 240W (48V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, PPS, Samsung Adaptive Fast Charging and Super Fast Charging, Huawei Fast Charge Protocol, Apple Fast Charging, SMART Charging and others. Support Extended Power Range (EPR) specification up to 240W and Standard Power Range (SPR) specification up to 100W. Support for fast charging with a current of up to 5A. Integrated E-MARK chip. Cable includes power wires 22AWG, data wires 30AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for computers, laptops, mobile phones, tablets, power banks, power tools and other devices with USB-C connector. Other data: cable length 1.5 m, 4.6 mm outer diameter of the cable. Package contains: USB-C M USB-C M black cable, tightening strip, packed in a printed and sealed foil package with hanging hole.

Premium AXAGON BUCM3-CM10AB SPEED USB 3.2 Gen 1 USB-C to USB-C data and charging cable with USB-C male connectors on both ends. The cable is designed for fast data transfer and charging of notebooks, phones, tablets, and other mobile devices. It supports data transfer speeds up to 5 Gb/s and charging current up to 3A. This durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface, and gold-plated contacts. The cable conductors are made of tin-plated oxygen-free copper. High-quality cable insulation made of flexible TPE guarantees maximum durability while also maintaining sufficient flexibility. The nylon braid provides the cable's final strength. A practical strap for easy cable packing is an added bonus. 22AWG power wires (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. The cable also supports notebook charging using Power Delivery 60W technology. 30AWG data wires, together with high-quality shielding, ensure reliable data transmission. Triple shielding protects transmitted signals from adverse interference. The nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable lifespan is extended to more than 8000 standard bends. The aluminum terminal covers also increase the cable's mechanical resistance. Connectors: 2x USB-C (M) male. Other Features: DATA SYNC & FAST CHARGING - simultaneous data transfer and charging of the mobile device battery. SuperSpeed USB - USB 3.2 Gen 1 (formerly USB 3.1 Gen 1 / USB 3.0). Compatible with USB 3.2 Gen 2, backward compatible with USB 2.0. Supports transmission rates of 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). Supports high-speed charging with current up to 3A. Supported charging technologies: Power Delivery 60W (20V/3A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging, and others. The cable includes 22AWG power wires and 30AWG data wires. Tin-plated oxygen-free copper conductors reduce oxidation, increase conductivity, and provide a clear signal without distortion. Double shielding using galvanized foil and oxygen-free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for notebooks, mobile phones and smartphones, tablets, power banks, and other mobile devices with a USB-C connector. Other data: cable length 1 m, outer diameter 4.5 mm. Package contains: black USB-C M to USB-C M cable, tightening strap, packed in a printed and sealed foil package with hanging hole.

AXAGON CLR-M2L3 ALU passive heatsink for ideal cooling of high performance M.2 SSDs, especially NVMe. The universal passive heatsink can be used for M.2 cards, size 22 x 80 mm. Two supplied thermally conductive pads allow cooler installation for all one-sided as well as double-sided M.2 SSD disks. 3mm high ribbed aluminum heatsink assists in a better dissipation of heat generated during the M.2 SSD operation. It also reduces the drive temperature by up to 15°C. This prolongs the M.2 SSD life and prevents disk slow down, so-called "Thermal Throttling". Thanks to its easy installation and compact dimensions, the heatsink can be used not only with M.2 AXAGON adapters, but also with M.2 (NGFF) slots on motherboards, etc. Low profile of heatsink allows usage in limited space. Features: • Support of M.2 drives of any capacity. • Support of both one-sided and double-sided M.2 drives. • Support of M.2 drives, size 22 x 80 mm. • Support of SATA (AHCI) as well as NVMe (PCI-Express) M.2 drives. • Ribbed aluminum heatsink body. • 2 thermally conductive pads can be deliberately combined and used for both one-sided and double-sided SSDs. • Compact dimensions 77 x 22 x 3 mm. • Weight 10 g. Package contains: • passive heatsink, • 2 thermally conductive pads, • mounting material, • packed in a cardboard box with clearly indicated parameters.

Slim USB 3.2 Gen 1 Memory Card Reader AXAGON CRE-S2N SUPERSPEED supports all current versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. With USB 3.2 Gen 1 (USB 3.0) interface, the reader achieves significantly higher data rates for UHS-I SD cards compared to USB 2.0 interface readers. The card reader allows simultaneous handling of cards in both slots and direct copying between them. The slim body of the reader does not prevent the use of secondary USB ports on the computer. Card reader matte surface limits the creation of fingerprints. The installation is very easy - only plug the reader into the computer USB port and the rest is done automatically. Card reader - two slots, supports the following formats: Micro SD slot: microSD / microSDHC / microSDXC / TransFlash, SD slot: Secure Digital, SDHC, SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with miniSD, MMC Micro adapter. The reader supports the following flash card specifications: SD 1.0 / 1.1 (SD - Secure Digital, up to 2GB). SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB). SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB). MMC and eMMC 3.x/4.0/4.1/4.2/4.3/4.4/4.5/5.0 (8-bit). Support for SD 3.01 and SD Jukebox applications (CPRM functions). Ultra High Speed UHS-I support (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s. Supports ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function. 2 LUN - in file managers, the reader is indicated as two disk drives. FAT 12/16/32, NTFS, exFAT (FAT 64) file formats support. Other features: SuperSpeed USB - USB 3.2 Gen 1 interface (before USB 3.1 Gen 1 / USB 3.0). Also compatible with USB 3.2 Gen 2, backward compatible with USB 2.0 and USB 1.1. Supports transmission rates 12 / 480 / 5000 Mbit/s (full / high / super speed). Full Plug and Play and Hot Swap support. Connects via USB type A male connector. Support for connection of phones with microUSB connector via OTG adapter. USB-bus card reader power supply. A blue LED indicating the connection to the computer's USB port (permanent light) and data transfer (blinking). Dimensions 68 x 21 x 10. Weight 11 g. Supported Operating Systems: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (all 32- and 64-bit Windows versions supported), Mac OS X 10.x and higher Linux with 2.4.x kernel and higher, Android all versions. Note: Drivers are included with supported operating systems and will be installed automatically. No other drivers need to be installed and are not even available. Package contains: SuperSpeed USB card reader, USB connector cap, packed in a cardboard box with a hanging hole.

Universal Compact SuperSpeed USB Memory Card Reader AXAGON CRE-SAC supports all current versions of SD and microSD cards including SDXC and microSDXC with capacities up to 2TB. With dual USB-C and USB-A connectors, the reader can be connected directly to desktop computers, laptops, smartphones, or tablets with a USB-C connector. Thanks to the USB 3.2 Gen 1 (USB 3.0) interface, the reader delivers much higher data transfer rates for UHS-I SD cards compared to readers with a USB 2.0 interface. The card reader allows simultaneous access to cards in both slots and direct copying between them. The reader's metal casing not only gives it a sleek appearance but also increases durability. Both connectors are protected by caps during transport. The included key ring hinge allows you to attach the card reader to your keychain. Installation is simple enough for anyone—just plug the reader into your computer or mobile device's USB port and the rest is fully automatic. Card Reader - Two Slots, Supports the Following Formats: Micro SD slot: microSD / microSDHC / microSDXC / TransFlash, SD slot: Secure Digital, SDHC, SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, as well as miniSD, microSD, microSDHC, microSDXC, MMC Micro (with adapter). The Reader Supports the Following Flash Card Specifications: SD 1.0 / 1.1 (SD - Secure Digital, up to 2GB). SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB). SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB). MMC and eMMC 3.x / 4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit). Supports SD 3.01 and SD Jukebox applications (CPRM functions). Ultra High Speed UHS-I support (SDR12/SDR25/SDR50/DDR50/SDR104) with speeds up to 104 MB/s. ECC (Error Correction Code) and CRC (Cyclic Redundancy Check) functions supported. 2 LUN – the reader appears as two disk drives in file managers. Supports FAT 12 / 16 / 32, NTFS, and exFAT (FAT 64) file formats. Other Features: SuperSpeed USB – USB 3.2 Gen 1 interface (formerly USB 3.1 Gen 1 / USB 3.0). Also compatible with USB 3.2 Gen 2, backward compatible with USB 2.0 and USB 1.1. Supports data transfer rates of 1.5 / 12 / 480 / 5000 Mbit/s (low / full / high / super speed). Full Plug and Play and Hot Swap support. Connects via USB Type-C male or USB Type-A male connector. Supports connection of phones with microUSB connector via OTG adapter. USB bus-powered. Dimensions: 75 x 22 x 12 mm (with caps attached). Weight: 18 g. Supported Operating Systems: MS Windows XP / Vista / 7/8 / 8.1 / 10 and newer, Windows Server 2003 / 2008 / 2012 / 2016 and later (all 32- and 64-bit Windows versions supported), Mac OS X 10.x and higher, Linux with kernel 2.4.x and higher, Android all versions. Note: Drivers are included with supported operating systems and will be installed automatically. Package Contents: SuperSpeed USB card reader, 2 USB connector caps, key ring hinge, printed installation guide, packed in a cardboard box.

Universal smart card reader | Application area Government,Banking & payments,Healthcare | Colour Black | Interface USB 2.0 | Weight 74 g

Universal AXAGON PWC-QC5 car USB charger for fast charging of up to two mobile devices at the same time. With a total power of 31.5W, the charger recharges mobile phones and tablets at the same speed as a mains USB power adapter. Two independent USB outputs, Quick Charge 3.0 and SMART 5V/2.6A, enable fast charging of most mobile devices. It is compatible with Apple iPhone, iPad, Samsung, Huawei, Honor, HTC, Xiaomi, LG, Motorola, and other fast-charging standards. Quick Charge 3.0 technology allows up to 4 times faster charging of supported devices than a conventional USB charger. The AIC function recognizes the connected device and automatically selects the optimal charging speed, while the CV/CC function ensures a stable charging process. The advanced protection system at the charging adapter output protects the charged device from damage. The car charger indicates correct input power with a built-in blue LED; its light is not dazzling and does not distract while driving. The body of the power adapter has a pleasant shape and size, so it can be easily removed from the car cigarette lighter socket. Input: input voltage DC 12V - 24V (WIV function), supports both passenger cars and trucks standard CL input - car cigarette lighter socket Outputs: two independent outputs 1x QC USB type A port: Quick Charge 3.0 - 3.6-6.5V/3A, 6.5-9V/2.1A, 9-12V/1.6A 1x USB type A port SMART: smart charging - 5V/2.4A and standard charging 5V support for simultaneous charging from both outputs total maximum power 31.5W (QC port 19.5W + SMART port 12W) total maximum current 5.4A (QC port 3A + SMART port 2.4A) Supported charging technologies: QC USB port: fast charging QC2.0, QC3.0, AFC, FCP, PE+, SMART SMART USB port: Standard 5V and SMART 5V/2.4A The charger charges devices with the following technologies: Standard charging of all devices that support 5 V and charging of Apple iPhone 5, 6, SE, 7. SMART 5V/2.4A charging, Qualcomm Quick Charge 1.0, USB Battery Charging 1.2, and fast charging of Apple iPhone 8, X, XR, XS, XS Max, and iPads. QC - fast charging of devices that support Qualcomm Quick Charge 2.0 and Quick Charge 3.0. AFC - fast charging of devices that support Samsung Adaptive Fast Charging. FCP - fast charging of devices that support Huawei Fast Charge Protocol. PE+ - fast charging of devices that support MediaTek Pump Express+ and Pump Express+ 2.0. The charger supports WIV, AIC, and CV/CC functions: Wide Input Voltage - a wide input voltage range function; it protects the adapter against undervoltage and overvoltage at the input and allows automatic detection of 12V or 24V vehicle electrical systems. Automatic Intelligent Communication - automatic recognition of the connected device to select optimal charging parameters. Constant Output Voltage / Constant Output Current - the constant voltage and constant current maintenance function prevents output power fluctuations; this function ensures a stable charging process. Comprehensive output protection: OCP, OVP, OTP, OSP: Over Current Protection - protection of the output against current overload. Over Voltage Protection - protection against overvoltage at the output. Over Temperature Protection - protection against overheating of the adapter. Output Short Circuit Protection - short-circuit protection at the output. Other features: Subtly shining blue LED indicates the input voltage connection, Dimensions: depth 59 mm, diameter 28 mm, Weight: 23 g, Material: non-flammable plastic. Package contains: dual car charger, multilingual manual CZ / ENG / DE / ESP / FR / HU / IT / PL / RO / RU / SK / BG, packed in a cardboard box with the product clearly displayed.

Dual AXAGON PWC-5V5 car USB charger to charge up to two mobile devices at a time. With a total power of 24W, the charger recharges mobile phones and tablets at the same speed as the mains USB power adapter. Two USB SMART 5V/2.4A oututs allow charging of most mobile devices. It is compatible with Apple iPhone, iPad, iPod, and Android phone and tablet charging standards. The AIC function recognizes the connected device and automatically selects the optimal charging speed, while the CV/CC function ensures steady course of charging. The advanced protection system at the charging adapter output protects the device being charged from damage. The car charger indicates the correct input power with a blue LED built inside, its light does not dazzle and does not distract you while driving. The body of the power adapter has a pleasant shape and size, so it can be easily removed from the car cigarette lighter socket. Input: input voltage DC 12V - 24V (WIV function), supports both passenger cars and trucks standard CL input - car cigarette lighter socket Outputs: two outputs 2x USB type A port: SMART: Smart Charging - 5V/2.4A and standard 5V charging support for simultaneous charging from both outputs total maximum power 24W, total maximum current 4.8A The charger charges devices with the following technologies: Standard charging of all devices that support 5 V and Apple iPhone 5, 6, SE, 7 charging. SMART 5V/2.4A charging, Qualcomm Quick Charge 1.0, USB Battery Charging 1.2 and quick charging of Apple iPhone 8, X, XR, XS, XS Max and iPads. The charger supports WIV, AIC, and CV/CC functions: Wide Input Voltage - function of a wide range of input voltage; it protects the adapter against undervoltage and overvoltage at the input and enables automatic detection of 12V or 24V on-board distribution. Automatic Intelligent Communication - function of automatic recognition of the connected device to select optimal charging parameters. Constant Output Voltage / Constant Output Current - the constant voltage and constant current hold function prevents the output power fluctuations; this function ensures steady course of charging. Complex output protection: OCP, OVP, OTP, OSP: Over Current Protection - protection of output against current overload. Over Voltage Protection - protection against overvoltage at the output. Over Temperature Protection - protection against overheating of the adapter. Output Short Circuit protection - short circuit protection at the output. Other features: Decently shining through blue LED indicates the input voltage connection, Dimensions: depth 59 mm, diameter 28 mm, Weight: 20 g, Material: non-flammable plastic. Package contains: dual car charger, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with a visibly presented product.

The lightweight screwless AXAGON EE25-SLC SLIDE BOX external enclosure with USB 3.2 Gen 1 (USB 3.0) and SATA 6G interface is designed for all 2.5" SATA hard drives or SSDs. The reversible USB-C connector provides a reliable and convenient connection. The SATA 6G interface with UASP support lets you enjoy the speed of modern SSDs. Support for the TRIM feature limits the gradual degradation of SSD performance over time. It can read S.M.A.R.T. information for monitoring the condition of the external drive. Supports hibernation for the connected drive and the enclosure. The plastic enclosure body allows easy drive replacement without the need for screws. The finely textured cover surface is scratch-resistant and prevents unwanted fingerprints. The foam padding inside the enclosure secures and protects the inserted drive. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB transfer rates up to 5 Gbit/s. Connection via reversible USB Type-C female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface, supports 2.5" HDD/SSD, max. disk capacity - unlimited, max. 2.5" disk height 9.5 mm. Other features: Compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0, backward compatible with USB 2.0. Supports transfer rates of 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Compliant with Serial ATA 3.0 specification (SATA/600), transfer rates up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transfer rates up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transfer rates up to 1.5 Gb/s (150 MB/s). The total bandwidth / transfer rate of the enclosure is determined by the USB interface used (theoretical 5 Gbit/s). Supports UASP (USB Attached SCSI Protocol) and BOT (Bulk-Only Transport). SSD/HDD boot support in an external enclosure. Ability to connect your device while running thanks to Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic disk spin-down after 10 minutes of inactivity. HDD Turn Off - turns off the disk after disconnecting the device or putting the PC to sleep. Connection via USB-C 3.2 Gen 1 female connector. USB-C / USB-A cable, 32 cm long, included. A subtle blue LED indicates connection to the computer's USB port (steady light) and data transfer (blinking). External enclosure dimensions 130 x 82 x 16 mm. Weight 63 g. Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2008 / 2012 / 2016 and later (all 32- and 64-bit Windows OS versions are supported), Mac OS X 10.x and later, Linux with kernel 2.6.x and later.Note: Drivers are included in supported operating systems and are installed fully automatically. No additional drivers need to be installed and none are available. Package contains: USB-C 3.2 Gen 1 external enclosure for 2.5" SATA disk, USB-C - USB-A cable, 32 cm long, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

The compact aluminum AXAGON EE35-XA3 ALINE external enclosure with a high-speed USB 3.2 Gen 1 (USB 3.0) interface is designed for 3.5" SATA drives. UASP support enables you to achieve the maximum possible speed with modern hard drives. Allows reading of S.M.A.R.T. information to monitor the external disk's status. Supports spinning down the connected drives as well as the enclosure itself. The durable cast aluminum enclosure offers excellent mechanical protection for the drive and outstanding heat dissipation. The discreetly shaped case with a brushed finish provides an elegant look while preventing unwanted fingerprints. Easy hard disk installation as well as automatic setup can be managed even by beginners, allowing you to easily create an external drive. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB transfer rates up to 5 Gbit/s. Connection via micro USB type B female connector. Device support: SATA II - 3 Gb/s (300 MB/s) interface, Supports 3.5" HDD. Features: Compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0 and backward compatible with USB 2.0. Supports transfer rates of 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Supports 3.5" SATA III / II / I drives of all capacities without limitation. Complies with Serial ATA 2.0 specification (SATA/300), transfer rates up to 3 Gb/s (300 MB/s). Complies with Serial ATA 1.0 specification (SATA/150), transfer rates up to 1.5 Gb/s (150 MB/s). The total bandwidth/transfer rate of the enclosure is determined by the SATA/300 interface used (theoretical 3 Gbit/s). Supports UASP (USB Attached SCSI Protocol). SSD/HDD boot support in external enclosure. Hot Plug support allows connecting your device while running. Full Plug and Play support. HDD Auto Spindown support - automatically spins down the disk after 10 minutes of inactivity. HDD Turn Off - turns off the disk after removing the device or shutting down the PC. Connection via durable large USB 3.2 Gen 1 Type B female connector. An 80 cm USB-B / USB-A cable is included. A discreet blue LED indicates connection to the computer’s USB port (steady light) and data transfer (blinking). The durable enclosure body is cast aluminum alloy; the end panels are plastic. Simple disk installation - the guides are mounted on the disk, the disk plugs directly into the motherboard’s SATA connector, and is inserted into the enclosure; the front panel is fastened with two screws using the included screwdriver. Compact adapter dimensions: 180 x 120 x 32 mm. Enclosure weight: 244 g (without cables and disk). Power supply: Powered by a compact external AC/DC adapter 12V - 2A (24 W) with a 150 cm supply cable. Power switch on the rear panel of the enclosure. AC adapter dimensions: 74 x 36 x 91 mm (incl. plug). AC adapter weight: 128 g (incl. supply cable). Supported OSs: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (all 32- and 64-bit Windows OS versions supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above. Note: Drivers are included with supported operating systems and install automatically. No other drivers need to be installed and no additional drivers are available. Package contains: USB 3.2 Gen 1 external enclosure for 3.5" SATA drive, 80 cm USB-B to USB-A cable, 100-240V / 12V-2A power adapter, mounting rails, screws, and screwdriver, stand for vertical operation, printed installation guide in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packaged in a cardboard box.

Fast external AXAGON EEM2-20G ARMORED box with USB 20Gbps interface for M.2 NVMe SSDs. The double-sided USB-C connector on the box enables a reliable connection. In the package you will find a USB-C -> USB-C cable to connect the box to your computer. Thanks to the USB 20Gbps interface, the transmission rate is up to 20 Gb/s. To take full advantage of the speed of the box, the controller of the connected device must be compatible with USB 3.2 Gen 2x2. These controllers are typically used in gaming laptops and modern desktop computers. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. The advantage of the box is the attachment of four different lengths of SSD cards - 30, 42, 60 and 80 mm. M.2 drives can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Opening the box via only one screw makes it easy to mount and dismount the M.2 SSD disk. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. Aluminum box body and thermal conductive pad provides very good M.2 SSD disk cooling. Vents on the sides ensure sufficient air circulation. This extends its service life and also prevents the disk from slowing down, so-called Thermal Throttling. Another benefit is the silicone sleeve, which provides better protection of the box against shocks, prevents sliding on the table and ensures a comfortable grip in the hand. The outer metal housing is made in black colour with an elegant finish, that prevents unwanted fingerprints. By inserting the M.2 SSD in the box, you will easily create fast compact and universal external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 20Gbps (USB 3.2 Gen 2x2), connector USB-C female. Compatible with USB 5Gbps, USB 10Gbps. Device support: NMVe M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Maximum theoretical supported speeds and compatibility with USB controllers (ports): Laptop / PC with USB 20Gbps (USB 3.2 Gen 2x2) port: max. speed 20 Gbit/s. Laptop / PC with USB 10Gbps (USB 3.2 Gen 2) port: max. speed 10 Gbit/s. Laptop / PC with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0) port: max. speed 5 Gbit/s. Compatible with USB4, Thunderbolt 3/4 ports: max. speed 10 Gbit/s. The real box bandwidth / transmission rate is about 2000 MB/s (2 GB/s), it is given by the limits of the USB 3.2 Gen 2x2 interface. Other features: Supports transmission rates 20.000 / 10.000 / 5.000 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) M.2 SSD disks without a maximum capacity limit. Support of M.2 disks of these sizes 2230, 2242, 2260, and 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3c Specification. Compliant with USB Mass Storage Class specification. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminium body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2x2 type C female connector. USB type C male / USB type C male cable length 38 cm in the package. Other data: Box dimensions 15 x 112 x 40 mm (H x W x D). Box weight 83 g (without cable, without disk, without sleeve). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 20Gbps external box for M.2 SSD, silicone sleeve, USB-C USB-C cable 38 cm long, 1 thermal conductive pad, mounting kit and screwdriver, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with a hanging hole.

Fast external AXAGON EEM2-UB2 ARROW enclosure with a USB 10Gbps interface for M.2 NVMe SSDs. The reversible USB-C connector on the enclosure ensures a reliable connection. The package includes a USB-C to USB-C cable for connecting the enclosure to your computer. The transfer rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 enclosure also supports other modern features, such as UASP, TRIM, and allows reading S.M.A.R.T. disk status monitoring information. Supports standby mode when idle. An advantage is support for three different SSD lengths - 42, 60, and 80 mm. M.2 drives can be single-sided or double-sided. The enclosure does not limit the capacity of the installed SSD. Opening the enclosure with just one screw makes mounting and removing the M.2 SSD easy. Drive replacement is quick and simple, expanding the enclosure's range of uses, e.g. for data migration, testing, etc. The outer metal housing comes in black with an elegant finish that prevents unwanted fingerprints. The aluminum enclosure body and thermal conductive pad provide very good cooling for the M.2 SSD. This extends its service life and also prevents the drive from slowing down, known as Thermal Throttling. By inserting an M.2 SSD into the enclosure, you can easily create a fast, compact and universal external drive. The enclosure can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), USB-C female connector. Compatible with USB 3.2 Gen 1, USB4, and Thunderbolt 3/4. Device support: NVMe M.2 SSD drives, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transfer rates of 10.000 / 5000 / 480 Mbit/s. Supports M key or B+M key NVMe (PCI-Express) M.2 SSD drives with no maximum capacity limit. Supports M.2 drives in sizes 2242, 2260, 2280 mm. Supports both single-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a. Compliant with NVM Express 1.3 specification. Compliant with USB Mass Storage Class specification. The total bandwidth / transfer rate of the adapter is determined by the USB interface used (theoretical 10 Gbit/s). The actual adapter bandwidth / transfer rate is about 1.000 MB/s (1 GB/s), limited by the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transfer in Windows 8 and later. Supports TRIM functionality to limit the gradual degradation of SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring of drive condition. Supports booting from an SSD in the external enclosure. Allows device connection while running thanks to Hot Plug support. Full Plug and Play support. Standby support - the drive goes to sleep after 5 minutes of inactivity. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A subtle blue LED indicates connection to the computer's USB port (steady light) and data transfer (blinking). The robust aluminum body and thermal conductive pad help cool the M.2 SSD more effectively. A higher enclosure surface temperature is not a defect - thanks to the aluminum body, heat generated during drive operation is dissipated better and transferred to the surroundings. Connection via USB 3.2 Gen 2 Type-C female connector. USB Type-C male / USB Type-C male cable, length 20 cm, included in the package. Other data: Enclosure dimensions 115 x 39 x 11 mm. Enclosure weight 43 g (without cable and M.2 SSD drive). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS, and Android. Compatibility depends on operating system support and device manufacturer support. Note: when using Windows 7, it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 10Gbps external enclosure for M.2 SSD, USB-C - USB-C cable, 20 cm long, 3 thermal conductive pads, mounting accessories and a screwdriver, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with a hanging hole.

The AXAGON HMC-12GM2 GEN2COMBO 12in1 multiport USB-C 10Gbps hub expands your laptop, computer, or phone with eleven ports and an external box for an M.2 drive. You can easily and quickly connect up to two monitors, four USB devices, a Gigabit Ethernet network, headphones, an SD card reader, and an NVMe or SATA M.2 SSD to your computer via the reversible USB-C connector. You also get the option to power a laptop using Power Delivery technology at the same time. The USB-C hub gives you a simple and compact 12in1 docking station for notebooks such as the MacBook Air or Pro. The USB hub offers three USB outputs with standard USB-A connectors. Two provide 5Gbps speeds, and a third provides 10Gbps speeds for more demanding devices. It also offers a USB-C 10Gbps data connector. The hub can also handle the permanent connection of two external drives simultaneously. Thanks to the fast USB 3.2 Gen 2 interface, the hub's transfer rate is up to 10Gbps. The second USB-C connector is reserved only for powering and simultaneous charging of laptops using Power Delivery 3.0 technology with power of up to 100W. Connect a suitable USB-C Power Delivery charger to the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port. HDMI and DisplayPort outputs provide high-quality video. Whether used alone or simultaneously, the ports offer resolutions up to 4K/60Hz Ultra HD and support multi-channel audio transmission. High refresh rates at popular gaming resolutions of 2K/144Hz or FullHD/240Hz are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colors and contrast without restrictions. For the video outputs to work properly, the laptop must have a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3 port and above. You can connect an NVMe or SATA M.2 SSD thanks to the built-in slot on the back. The multiport hub thus becomes an external drive. M.2 cards can be single-sided or double-sided up to a size of 22x80 mm. The external M.2 box has no capacity limitations for SSDs and supports modern functions such as TRIM, UASP, and reading S.M.A.R.T. disk status monitoring information. The Gigabit network card extends your computer with a fast and stable network connection, adding a missing RJ-45 network connector or another network card.The card reader supports all versions of SD and microSD cards including SDXC and microSDXC with capacities up to 2TB. Thanks to the high-speed USB interface, you can make the most of the potential of modern memory cards. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The elegant aluminum body ensures not only mechanical durability, but also passive cooling. Active cooling is provided by a silent integrated fan, which cools both the M.2 drive and the body of the hub itself. You will also appreciate the finely textured surface, which does not retain fingerprints. The port replicator is the ideal accessory for laptops lacking USB connectors, memory card slots, or video outputs. The 50 cm USB-C cable is detachable and can be replaced with a longer cable if needed. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub is also suitable for phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV, or projector to the phone. Input: USB 10Gbps (USB 3.2 Gen2). Compatible with Thunderbolt 3/4. Connection via reversible USB type C female connector. USB outputs: 1x USB 10Gbps port, USB-A female connector. 2x USB 5Gbps port, USB-A female connector. 1x USB 10Gbps port, USB-C female connector. 1x USB Power Delivery 100W (only for charging), USB-C female connector. The USB-C hub can handle the connection of two external drives simultaneously. Video outputs: 1x HDMI A port, HDMI A female connector. 1x DP port, DisplayPort female connector. Video resolution and properties: The maximum supported resolution when each port is connected individually is 4K / 4096 x 2160 at 60 Hz. 2 simultaneously connected monitors - up to 4K/60Hz on both monitors. For proper video output function, the hub must be plugged into a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) version 1.4 or higher, or a USB-C port with Thunderbolt 3/4 support. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. Full support for HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection). Supports up to 8-channel LPCM audio, compressed audio (AC-3, DTS), and HBR audio formats. Supports sample rates up to 192 kHz and up to 24-bit audio - depends on the source and destination device, i.e. laptop/phone and TV/monitor/AV receiver. Power Delivery: Power Delivery 3.0 support for device power supply from the wall charger via the USB-C hub. Maximum power supply via the PD USB-C hub output: 100W - 20V/5A. PD support is required from the device (laptop, phone) and a suitable PD wall charger. The card reader - two slots: Slot Micro SD: microSD / microSDHC / microSDXC / TransFlash. Slot SD: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro. The reader supports the following flash card specifications: SD 1.0/1.1 (SD - Secure Digital, up to 2GB). SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB). SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB). MMC and eMMC 3.x / 4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit). Supports SD 3.01 and SD Jukebox applications (CPRM functions). Supports Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s. Supports hardware ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function. 2 LUN - the reader is shown as two disk drives in the file manager. Copying from card to card. M.2 SSD slot: NVMe & SATA M.2 SSD drives. Designed for M key or B+M key format cards. NGFF 75-pin M-key slot for M.2 drives. Supports M.2 drives with sizes of 2242 and 2280 mm. Supports both single-sided and double-sided M.2 SSDs. Compliant with the PCI Express Base Specification Revision 3.1a. Compliant with the NVM Express 1.3 specification. Compliant with the Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with the USB Mass Storage Class specification. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of SSD performance over time. Supports booting from an SSD in the hub's M.2 slot. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface: 10/100/1000 Mb/s. Supported specifications: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T. 10/100/1000 Mbit/s auto-detection. Supports IPv4 / IPv6 packet Checksum Offload Engine (COE) to reduce processor load, including IPv4 IP/TCP/UDP/ICMP/ IGMP & IPv6 TCP/UDP/ICMPv6 checksum control and generation. Supports TCP Large Send Offload V1 and V2. Supports IEEE 802.1P Layer 2 priority encoding & decoding. Supports IEEE 802.1Q VLAN tagging. Supports IEEE 802.3az EEE (Energy Efficient Ethernet) - reduced power consumption at rest. Supports Jumbo frame. Supports full-duplex transmission with IEEE 802.3x flow control and half-duplex transmission with back-pressure flow control. Supports Auto MDI/MDIX - crossover detection and auto-correction eliminate the need for crossover cables. Supports hardware Cyclic Redundancy Check (CRC) to detect transmission errors. Supports Pair Swap/Polarity/Skew Correction. Wake-on-LAN function in different modes: Supports sleep mode and remote Wake Up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection, ECMA-393 proxZzzy for sleeping hosts, RealWoW!, and also Link Change Wake-up. Advanced Power Management features: The adapter supports advanced power management and advanced power saving, e.g. when the Ethernet cable is disconnected. Supported power management technologies include, for example, Advanced Configuration Power management Interface (ACPI), Link Power Management (LPM), or IEEE 802.3az EEE (Energy Efficient Ethernet), and others. Audio output / input: 1x 3.5 mm jack for a headset, headphones, or active speakers, 2-channel analog stereo output 48 kHz @ 16 bit for playback, 1-channel analog mono microphone input 48 kHz @ 16 bit for recording. Other features: Compatible with USB 10Gbps (USB 3.2 Gen 2). Backward compatible with USB 5Gbps (3.2 Gen 1 / USB 3.0). Supports transmission rates of 10.000 / 5.000 Mbit/s. Possibility to connect your device while running thanks to Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from a PD wall charger. Heavy-duty aluminium body for better hub cooling. A higher hub surface temperature is not a problem - the heat generated by the hub and M.2 drive operation is better dissipated and transferred to the surroundings. The LED indicates data transfer of the M.2 drive. High-quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 149 x 65 x 17 mm. Weight 178 g (incl. cable). USB cable length 50 cm. Supported operating systems: Windows 10 / 11 and later, macOS, Linux, Chrome OS, and Android. Compatibility depends on the OS used and support from the device manufacturer. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated operating systems and also depends on support from the device (notebook, phone) manufacturer. Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of the drivers. Package contains: USB-C hub USB-C cable 50 cm long mounting material multilingual manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA packed in a cardboard box

The multi-port USB-C 10Gbps AXAGON HMC-6G2L hub 6in1 expands your laptop, computer, or phone with six ports. You can easily and quickly connect a monitor, three USB devices, and a Gigabit Ethernet network to your computer at the same time via the reversible USB-C connector. You also have the possibility to power your laptop simultaneously using Power Delivery technology. This port replicator offers a simple and compact 6-in-1 docking station for Windows laptops as well as Apple laptops like the MacBook Air or MacBook Pro. The USB hub features three USB 10Gbps outputs: two with standard USB-A connectors and a third with a USB-C data connector. With the advanced USB 3.2 Gen 2 standard, you can connect high-speed devices, such as NVMe M.2 external drives, to all outputs at up to twice the speed of 10 Gb/s compared to standard Gen 1 hubs (5 Gbps). The hub can simultaneously connect multiple external drives and also allows charging phones and tablets with up to 1.5A/5V current. You can easily charge an Android smartphone, Apple iPhone, Apple iPad, and more from the hub. Another USB-C (PD) connector is reserved exclusively for charging phones or laptops using Power Delivery 3.0 technology with up to 100W of power. Connect a suitable USB-C Power Delivery charger to the hub and connect the hub to a laptop that supports Power Delivery to save one USB-C port. The HDMI output delivers high-quality images up to 4K/60Hz Ultra HD resolution and supports multi-channel audio transmission. High refresh rates at popular gaming resolutions such as 2K/120Hz and FullHD/240Hz are also supported. Thanks to HDR (High Dynamic Range) support, you can enjoy significantly enhanced color and contrast ranges. For video outputs to function properly, your laptop must have a USB-C port that supports DisplayPort Alternate Mode (DP Alt Mode) or Thunderbolt 3, 4, or higher. The Gigabit network card provides your computer with a fast, stable network connection, adding a missing RJ-45 port or another network card as needed. The compact and slim aluminum body not only looks great but also ensures mechanical durability and passive cooling. The finely textured surface is fingerprint-resistant for a clean look. You can continue using your current USB peripherals without needing to purchase new ones. Thanks to Plug and Play and Hot Plug functions, connecting the hub is easy and requires no complicated installation, and peripherals can be easily connected or disconnected while your computer is running. The hub also supports connection to phones with a USB-C port—for example, you can connect a flash drive, keyboard, mouse, display, TV, or projector to your phone. Input (connection to laptop): USB 10Gbps (USB 3.2 Gen 2), USB-C male connector. Compatible with USB 3.2 Gen 1, USB4, and Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 100W, USB-C female connector. Notebook charging via USB-C hub using a power adapter. PD power must be supported by both the laptop (or phone) and the wall charger. USB outputs: 2x USB 10Gbps port, USB-A female connector. 1x USB 10Gbps port, USB-C female connector. The USB-C hub can handle multiple external drives connected simultaneously. Mobile devices (including iPad) can be charged with up to 1.5A/5V from the hub's USB-A and USB-C ports. Video output: 1x HDMI A port, HDMI A female connector. 4K resolution 4096 x 2160 at up to 60Hz. 2K / WQHD resolution 2560 x 1440 at up to 120Hz. FHD resolution 1920 x 1080 at up to 240Hz. Maximum supported resolutions and refresh rates require connection to a computer with DisplayPort 1.4. To use the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or Thunderbolt 3/4. A compatible OS is also required. The video output function will not be available without these requirements. HDR support (High Dynamic Range, 10-bit support) for realistic reproduction of bright and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. Full support for HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection). Supports up to 2-channel LPCM audio. Supports 2-channel audio with a sampling rate up to 192 kHz and up to 24-bit audio—depends on the source and end device, such as laptop/phone and TV/monitor/AV receiver. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable. Supported data rates for the Ethernet interface: 10/100/1000 Mb/s. Supports IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mb/s auto-detection. Wake-on-LAN support. Other features: Ability to connect devices while running, thanks to Hot Plug support. Full Plug and Play support. Sleep mode support. Power via USB bus—USB bus power or PD wall charger. Heavy-duty aluminum body for improved cooling. High quality shielded cable ensures fast communication and minimizes interference. Dimensions: 120 x 46 x 15 mm. Weight: 79 g (including cable). USB cable length: 15 cm. Supported operating systems: Microsoft Windows 10 / 11, macOS, iPadOS, iOS, Linux, Chrome OS, and Android. Compatibility depends on the operating system and device manufacturer support. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OSes and also depends on support from the device (notebook, phone) manufacturer. Graphics card drivers may also affect correct product operation. We recommend downloading the latest driver versions. Package includes: USB-C hub with built-in 15 cm cable, multilingual manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with a hanging hole.

The multi-port USB-C 10Gbps AXAGON HMC-CUB83X2 DUAL 4K DISPLAY 7in1 hub expands your notebook, computer, or phone with two video outputs, a LAN connector, and USB ports. You can connect the notebook to the hub using the 15 cm long USB-C cable. This instantly gives you the option to connect two 4K monitors, three USB devices, and an RJ-45 connector for a Gigabit Ethernet network. At the same time, notebook charging via Power Delivery technology is available. Compatibility with Thunderbolt 3/4/5 provides you with a 7in1 docking station for laptops such as the Apple MacBook Air or Pro. The USB hub offers three USB 10Gbps data outputs, two with standard USB-A and a third with a USB-C connector. Thanks to the USB 3.2 Gen 2 interface, the hub's transfer rate is up to 10 Gb/s. The hub can also handle the permanent connection of several external drives simultaneously. Another USB-C connector is reserved only for charging phones or laptops using Power Delivery 3.0 technology with a power of up to 100 W. Connect a suitable USB-C Power Delivery charger to the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port. The docking station offers two video outputs — HDMI and DisplayPort — and allows you to connect external monitors, TVs, or projectors with a resolution of up to 8K/30Hz Ultra HD. Other resolutions are also supported, such as 4K/144Hz Ultra HD, 2K/240Hz Quad HD, or 1080p/240Hz Full HD, as well as multichannel audio transmission over HDMI. When two monitors are connected simultaneously, it provides a 4K/60Hz resolution on each of them. Thanks to HDR (High Dynamic Range) support, users can enjoy a significantly wider colour range and higher contrast, which is appreciated during both work and entertainment. The Gigabit network card extends your computer with a fast and stable network connection, adding a missing RJ-45 network connector or another network card. The compact aluminium body not only looks great, but also provides mechanical durability and passive cooling. The USB-C hub is an ideal accessory for laptops without USB-A connectors and video output. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug & Play and Hot Plug functions, connecting the hub is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. For proper hub function, the USB-C port of your notebook must support video output (DisplayPort Alternate Mode or Thunderbolt 3 and above) and Power Delivery. The hub can easily handle connection to phones and tablets with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV, or projector to the phone. Input (connection to a computer, tablet or phone): USB 10Gbps (USB 3.2 Gen 2), USB-C male connector. Compatible with USB 5Gbps, USB 20Gbps, USB 40Gbps, Thunderbolt 3/4/5. Input (power supply): USB Power Delivery 3.0 100 W, USB-C female connector. Charging of the laptop from the power adapter via USB-C hub. PD power supply must be supported by the laptop (tablet, phone), the cable, and the wall charger. USB outputs: 2× USB 10Gbps port, USB-A female connector. 1× USB 10Gbps port, USB-C female connector. The USB-C hub can handle the connection of several external drives at the same time. Charging of mobile devices (including iPad) from the hub's USB-A and USB-C ports. Video output: 1× DP port, DP female connector. 1× HDMI A port, HDMI A female connector. Maximum supported resolution: 1 monitor (DP) up to 8K/30Hz Ultra HD, 4K/144Hz Ultra HD, 2K/240Hz Quad HD, 1080p/240Hz Full HD. 1 monitor (HDMI) up to 8K/30Hz Ultra HD, 4K/144Hz Ultra HD, 2K/240Hz Quad HD, 1080p/240Hz Full HD. 2 monitors up to 4K/60Hz Ultra HD, 2K/144Hz Quad HD, 1080p/240Hz Full HD. Video features: For Apple devices running macOS, the maximum refresh rate is usually limited to 60 Hz. To achieve maximum resolution and refresh rate values on the video outputs, the hub must be plugged into a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) version min. 1.4 or a USB-C port supporting min. Thunderbolt 3. A suitable updated OS and up-to-date graphics drivers are also required. HDR support (High dynamic range, 10-bit support) — realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) support. 8-channel LPCM audio, compressed audio (AC-3, DTS), and HBR audio format support. Supports sample rates up to 192 kHz and up to 24-bit audio, depending on the source and destination device, i.e. laptop/phone and TV/monitor/AV receiver. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface: 10/100/1000 Mb/s. Supports IEEE 802.3i 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mb/s auto-detection. Other features: Possibility to connect your device while running thanks to Hot Plug support. Full Plug and Play support. Standby mode support. Power supply via USB bus — USB bus power. Power supply via PD charger (not included in package). The LED indicates the connection of the dock to the computer with a steady glow. High-quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions: 15 × 107 × 45 mm (H x W x D). Weight: 66 g (incl. cable). USB-C cable 15 cm long for connecting the hub to a laptop. Supported operating systems: Windows 10/11, macOS, Linux, iPadOS, iOS, Chrome OS and Android. Compatibility depends on the operating system and support from the device manufacturer. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS versions and also depends on support from the device (laptop, tablet, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of the drivers. Package contains: USB-C hub with fixed 15 cm long cable, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box with a hanging hole.

AXAGON HMC-STND HMC-STND USB-C 5Gbps ALUMINUM STAND & HUB 7in1 Multi-port USB-C 5Gbps hub and aluminum stand for laptops. HDMI 4k/60Hz, GLAN, PD, and 3 USB-A ports. USB-C cable 60 cm. The AXAGON HMC-STND 7in1 Hub & Stand is a unique multifunctional hub integrated into a stand for laptops or tablets. This hub expands your laptop or tablet with six additional ports. You connect your laptop to the hub via a 60 cm USB-C <-> USB-C cable. In no time, you get connectivity for a monitor, three USB devices, an RJ-45 connector for a Gigabit Ethernet network, and Power Delivery technology for powering the laptop. The two-joint stand improves ergonomics and comfort while working and is suitable for devices from 10" to 16". It is ideal as a 7in1 docking station for Windows laptops and Apple MacBook Air or MacBook Pro. Three USB-A 5Gbps outputs allow the connection of external drives (up to 2 at the same time), a flash drive, mouse, printer, and other USB accessories. The USB ports also charge mobile phones and tablets with up to 7.5W of power. The Gigabit network card expands the computer with a fast and stable network connection, replaces a missing RJ-45 Ethernet connector, or adds an additional network card. The HDMI output enables connection of an external monitor, TV, or projector with a resolution of up to 4K/60Hz Ultra HD, 2K/120Hz Quad HD, or 1080p/200Hz Full HD, as well as transmission of multi-channel audio. Thanks to HDR support, you can enjoy a significantly expanded range of colors and contrasts without limitations. The PD USB-C input is designed for a suitable Power Delivery charger. This allows your mobile device and the hub to be powered directly from the PD charger using Power Delivery 3.0 technology with up to 100W of power. The second USB-C connector is used to connect to the laptop with the included 60 cm long cable with a reversible USB-C connector on both ends. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple, without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. A great advantage of the stand is the clever double-hinge solution that allows adjustment of the tilt angle and height of the laptop screen so that it is flush with the external monitor. This gives you an additional workspace at the correct eye level, which greatly improves ergonomics and comfort at work and boosts your productivity. The elegant design of this stand not only complements your desk in style, but also offers practical functions. The base and hub cover are made of robust aluminum castings that provide passive cooling and guarantee the long life and reliability of the stand and hub. In addition, the cutouts in the base optimize heat dissipation from the notebook, contributing to higher performance and longer life for your device. Thanks to the non-slip finish, your device stays securely in place without the risk of unwanted movement and without any damage to the surface of the laptop or the pad.

The AXAGON HMC-WL9 WIRELESS CHARGING 9in1 multi-port USB-C 10Gbps hub expands your laptop, computer, or phone with two video outputs, a LAN connector, USB ports, and a wireless charger. You connect your laptop to the hub via a 60 cm long USB-C cable. This gives you immediate access to connectivity for two 4K monitors, four USB devices, and an RJ-45 connector for a Gigabit Ethernet network. At the same time, you gain the option of powering your notebook using Power Delivery technology. Thanks to compatibility with Thunderbolt 3/4/5, the 9in1 docking station works with laptops such as the Apple MacBook Air or MacBook Pro. Wireless charging for mobile phones with power up to 15 W is integrated directly into the body of the hub. Thanks to the magnetic mounting system, you only need to place your phone on the surface and it automatically aligns into the optimal position. Charging is therefore maximally efficient, safe, and convenient. Naturally, it is compatible with the Qi1, Qi2, and MagSafe standards. To achieve maximum wireless charging performance, a 100 W PD charging adapter must be used. The wireless charging technology is compatible with a wide range of devices, such as Apple iPhone, Samsung, Google Pixel, Xiaomi, Nothing Phone, as well as models from OnePlus, Huawei, Motorola, and others. Thanks to the universal Qi standard, it is easy to charge older models with lower power output. The USB hub with 4 USB ports offers high-speed connectivity: two USB-A and one USB-C with speeds up to 10 Gbps for fast data transfer, and one USB-A 480 Mbps port ideal for a keyboard or mouse. Thanks to the USB 3.2 Gen 2 interface, the hub's transfer rate is up to 10 Gb/s. The hub can also handle the permanent connection of several external drives simultaneously. The USB-C (PD) input is designed for a Power Delivery charger. This way, both the notebook and the dock are powered directly from a PD charger using Power Delivery 3.0 technology with power up to 100 W. Two video outputs, HDMI and DisplayPort, allow you to connect external monitors, TVs, or projectors with up to 4K/60Hz Ultra HD resolution when two monitors are connected at the same time. Other resolutions are also supported, such as 2K/120Hz Quad HD or 1080p/240Hz Full HD, as well as multichannel audio transmission through HDMI. Thanks to HDR support, you can enjoy a significantly expanded range of colours and contrasts. The Gigabit network card extends your computer with a fast and stable network connection, adds the missing RJ-45 Ethernet connector, or provides another network card. The aluminum body not only looks great, but also provides mechanical durability and passive cooling. Thanks to the rubber pad on the base, the station stays firmly in place. The USB-C hub is an ideal accessory for laptops without USB-A connectors and video output. Thanks to the Plug & Play and Hot Plug functions, connecting the hub is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. For the proper function of the hub, the USB-C port of your notebook must support video output (DisplayPort Alternate Mode or Thunderbolt 3 and above) and Power Delivery power. The hub can easily handle connection to phones and tablets with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV, or projector to the phone. Input (connection to a computer, tablet, or phone): USB 10 Gbps (USB 3.2 Gen 2), USB-C male connector. Compatible with USB 5Gbps, USB 20Gbps, USB 40Gbps, Thunderbolt 3/4/5. Input (power supply): USB Power Delivery 3.0 100 W, USB-C female connector. Charging of the laptop from the power adapter via USB-C hub. PD power must be supported by the laptop (tablet, phone), the cable, and the wall charger. Wireless charging: Supports 5 W, 7.5 W, 10 W, and 15 W wireless charging. Compatible with Qi1, Qi2, and Apple MagSafe technologies. Supports magnetic alignment for efficient charging. A 100 W PD charging adapter must be used to achieve maximum wireless charging performance. Examples of compatible Qi1 and Qi2 wireless charging phones: Apple iPhone: Compatible with iPhone 8 to 17 models, including the X, 11, 12, 13, 14, 15, 16, and 17 series, and all mini, Plus, Air, Pro, and Pro Max variants. Samsung Galaxy: Compatible with Samsung Galaxy S8 to S25 models, including the S, S+, S Ultra, Z Flip (Flip3Flip6), and Z Fold (Fold3Fold6) series. Google Pixel: Compatible with Google Pixel 4 to 10 models, including the Pixel 4 XL, 6 Pro, 7 Pro, 8 Pro, 9 Pro, 10 Pro, and Pixel Fold. Note: To achieve the highest charging speed, the phone needs to be properly centred. Thanks to the magnetic ring in the device or its case, the smartphone easily aligns itself into the optimal position. USB outputs: 1× USB 480Mbps port, USB-A female connector. 2× USB 10Gbps port, USB-A female connector. 1× USB 10Gbps port, USB-C female connector. The USB-C hub can handle the connection of several external drives at the same time. Charging of mobile devices (including iPad) from the hub's USB-A and USB-C ports. Video output: 1× DP port, DP female connector. 1× HDMI port, HDMI A female connector. Maximum supported resolution: 1 monitor (DP) up to 8K/30Hz Ultra HD, 4K/60Hz Ultra HD, 2K/120Hz Quad HD, 1080p/240Hz Full HD. 1 monitor (HDMI) up to 4K/60Hz Ultra HD, 2K/120Hz Quad HD, 1080p/240Hz Full HD. 2 monitors (DP + HDMI) up to 4K/60Hz Ultra HD, 2K/120Hz Quad HD, 1080p/240Hz Full HD. Video features: For Apple devices running macOS, the maximum refresh rate is usually limited to 60 Hz. To achieve maximum resolution and frequency values on video outputs, the hub must be plugged into a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) version min. 1.4 or a USB-C port supporting min. Thunderbolt 3. A suitable updated OS and up-to-date graphics drivers are also required. HDR support (High Dynamic Range, 10-bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. Full support for HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection). HDMI support for 8-channel LPCM audio, compressed audio (AC-3, DTS), and HBR audio formats. HDMI support for sampling rates up to 192 kHz and up to 24-bit audio depends on the source and destination device, i.e., notebook/phone and TV/monitor/AV receiver. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface: 10/100/1000 Mb/s. Supported IEEE 802.3i 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mb/s auto-detection. Other features: Possibility to connect your device while running thanks to Hot Plug support. Full Plug and Play support. Standby mode support. Power supply via USB bus USB bus power. Power supply via PD charger (not included). The LED indicates the connection of the dock to the computer with a steady glow. High-quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions: 84 × 84 × 140 mm (W × D × H). Weight: 440 g (without cable). USB-C to USB-C cable length 60 cm for connecting the dock to a laptop. Supported operating systems: Windows 10 / 11, macOS, Linux, iPadOS, iOS, Chrome OS, and Android. Compatibility depends on the operating system and device manufacturer support. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from the device (laptop, tablet, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of the drivers. Package contains: USB-C docking station, USB-C to USB-C cable, length 60 cm, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box.

The AXAGON HUE-C1A Travel USB-A 5Gbps hub quickly and easily connects up to four USB devices to your laptop or computer simultaneously. Its fixed 19 cm USB-A cable is ideal for users of mobile devices. The USB 3.2 Gen 1 standard allows transfer speeds of up to 5 Gb/s. This compact USB hub's versatility is further enhanced by a built-in USB-C connector for additional power from standard USB chargers used for mobile phones. With this extra power supply, you can connect even more external drives to your computer or increase the number of charging mobile phones. The hub can also handle a permanent connection of several external drives even without an external power supply. The hub also supports charging phones and tablets with a current of up to 1.5A/5V, making it easy to charge Android smartphones, Apple iPhones, Apple iPads, etc. The hub can also be used with phones via the appropriate OTG or USB-A to USB-C adapter, allowing you to connect a flash drive, keyboard, and mouse to your phone or tablet. Input: USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0) and USB 1.1. USB type A male connector on a fixed 19 cm cable. Outputs: 4x USB 5Gbps, USB-A female connectors. Supported data rates: 5,000 / 480 / 12 / 1.5 Mbps. The total bandwidth / transfer rate is determined by the USB 5Gbps interface (theoretically up to 5 Gbit/s). Features: Hot Plug support allows you to connect your device while running. Full Plug and Play support. Standby mode support. High quality shielded cable ensures fast communication and minimal unwanted interference. Subtly bright LED indicates hub connection to the computer. Dimensions: 106 x 32 x 11 mm. Weight: 37 g (including cable). USB cable length: 19 cm. The hub power mode via USB cable (bus power): USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered devices (printer, scanner, 3.5" external drive) to all four ports. In this power mode, the USB hub can operate with up to 2 magnetic 2.5" external drives simultaneously. Charge mobile devices (including iPad) with up to 1A current in each hub port. The hub power mode via USB + external USB charger (self power): Integrated USB-C connector in the body of the hub for additional power supply. Any mobile device wall charger (not included) with a USB-C connector can be used (recommended charger output min. 2A). In this mode, the USB hub can operate with three magnetic 2.5" external drives. Recommended for connection to smartphones and tablets. Charge mobile devices (including iPad) with up to 1.5A current in each hub port. Supported OS: Windows 8.1 / 10 / 11 and later, Windows Server 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and later, Most Android versions. Package contains: USB-A hub with fixed 19 cm cable, Multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, Packed in a cardboard box with a hanging hole.

Travel USB-C 5Gbps hub AXAGON HUE-C1C fast and easy connects up to four USB devices to laptop or computer at the same time. Fixed 19 cm long USB-C cable is ideal for mobile devices users. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5 Gb/s. The versatility of this compact USB hub is also enhanced by the built-in USB-C connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply several external disks or increase the number of mobile phones you can charge. Even without an external power supply, the hub can handle the permanent connection of several external drives. The hub also enables charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard and mouse to your phone or tablet. Input: USB 5Gbps (USB 3.2 Gen1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0) and USB 1.1. Connecting USB type C male connector on a fixed 19cm long cable. Outputs: 4x USB 5Gbps, USB-A female connector. Supported transmission rates 5.000 / 480 / 12 / 1.5 Mbps. The total bandwidth / transfer rate of the box is given by the used USB 5Gbps interface (theor. up to 5 Gbit/s). Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Decently bright LED indicates the connection of the hub to the computer. Dimensions 106 x 32 x 11 mm. Weight 37 g (incl. cable). USB cable length 19 cm. The hub power mode via USB cable (bus power): USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. In this power mode, the USB hub is also able to work with up to 2 magnetic 2.5" external disks simultaneously. Charge mobile devices (including iPad) with current up to 1A in each of the hub ports. The hub power mode via USB + external USB charger (self power): Integrated USB-C connector in the body of the hub for additional power supply of the hub. Any mobile device wall charger (not included) with USB-C connector can be used (recommended output current of the charger min. 2A). In this power mode, the USB hub is able to work with three magnetic 2.5" external disks. Recommended for connection to smartphones and tablets. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. Supported OS: Windows 8.1 / 10 / 11 and later, Windows Server 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and later, Android most versions. Package contains: USB-C hub with fixed 19 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

The miniature metal AXAGON HUE-M1A USB 3.2 Gen 1 (USB 3.0) hub quickly and easily connects up to four USB devices to a laptop or computer. The metal hub body is made of aluminium and provides excellent mechanical protection during frequent transport. Its elegant, finely textured surface resists fingerprints. Rubber pads prevent the hub from slipping on the table. The permanently attached 20 cm USB cable is ideal for users of mobile devices. This compact travel hub can also handle the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface, transfer speeds reach up to 5Gb/s. The hub can also charge phones and tablets with a current of up to 1.5A/5V. It can therefore easily charge an Android smartphone, Apple iPhone, Apple iPad, etc. The USB hub is an ideal accessory for ultrabooks with a limited number of USB-A ports. The hub can also be connected to phones using a suitable OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard, and mouse to your phone or tablet. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. USB type A male connector on a permanently attached 20 cm cable. Output: 4x SuperSpeed USB ports, USB-A female connectors. Supports transfer rates of 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the hub is determined by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). The USB hub can handle the permanent connection of several external drives. Features: Ability to connect devices while the computer is running thanks to Hot Plug support. Full Plug and Play support. Sleep mode support. The high-quality shielded cable ensures high communication speed and minimal unwanted interference. A white LED indicates connection to the computer's USB port. Power supply via USB bus (USB bus power). Dimensions 70 x 24 x 18 mm. Weight 35 g (incl. cable). USB cable length 20 cm. Power / Charging: USB power is sufficient for connecting low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered devices (printer, scanner, 3.5" external drive) to all four ports. The USB hub can also handle the permanent connection of several external drives simultaneously. Charges mobile devices (including iPad) with a current of up to 1.5A in each hub port. The total charging current (divided between the ports) reaches up to 2.8A at 5V (depending on the capabilities of the computer's USB port). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (all 32 and 64-bit versions of Windows OS are supported), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, most Android versions.Note: Drivers are included in supported operating systems and are installed completely automatically. No additional drivers need to be installed and none are available. Package contains: SuperSpeed USB hub with permanently attached 20 cm USB cable, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

The four-port AXAGON HUE-S2BL USB 3.0 hub features a 1.2 m long USB cable, optional external power, and fast charging support on all ports. This lightweight, compact hub with an elegant matte plastic body allows you to quickly and easily connect up to four USB devices to your PC at once. The permanently attached 1.2 m long USB cable is ideal for use with desktop computers. A key advantage is the ability to provide external power from any mobile device charger with a micro USB connector. Any unused charger can transform this USB hub into a fast-charging hub at no extra cost. Thanks to USB Battery Charging 1.2 support, mobile phones, tablets, power banks, and other devices can be charged up to 2A (depending on the charger used) in any hub port. iPad tablets can also be charged (at approximately 1A) even without additional power supply, which is useful since iPads typically cannot be charged directly from PC USB 3.0 ports. The hub can even handle a permanent connection of several external drives without external power. When an external power supply is connected, you can work with up to three external drives at once. It can also operate as a standalone charging hub, charging USB devices from the power adapter even when the PC is turned off or disconnected. The USB ports are arranged along the hub body with enough space to allow convenient direct connection of larger USB devices. Features: 4 downstream USB 3.0 ports with ample space around the connectors. 1 upstream USB 3.0 port with a USB 3.0 Type A male connector on a 120 cm permanently attached cable. Compatible with USB 3.0, backward compatible with USB 2.0 and USB 1.1. Supports data transfer rates of 1.5 / 12 / 480 / 5000 Mb/s (low / full / high / super speed). Supports USB Battery Charging v1.2 specification. Each hub port supports charging up to 2A (with external USB charger - not included). Hot Plug support allows you to connect or disconnect devices while running. Full Plug and Play support. LED indicator shows when the hub is powered. Overcurrent detection and protection. Hub dimensions: 96 x 32 x 22 mm. Hub weight: 76 g (including cable). Hub power mode via USB cable (bus power): USB bus power is sufficient for connecting devices with low power consumption (mouse, keyboard, card reader, flash drive, etc.) or self-powered devices (printer, scanner, 3.5" external drive) to all four ports. In this power mode, the hub can also handle up to two magnetic 2.5" external drives simultaneously. Mobile device charging (including iPads) is possible in this mode, but the charging current is limited to 0.9A, or in some cases, 1A (depending on the computer). Hub power mode via USB charger – not included (self power): Any mobile device charger with a micro USB connector (recommended charger output 2A) can be used. In this mode, the hub can manage three magnetic 2.5" external drives, however, for reliable long-term operation, it is recommended to connect a maximum of two 2.5" external drives at the same time. Fast charging of mobile devices (including iPads) up to 2A per hub port. The total current supplied during charging is limited by the external adapter’s output current. Independent charging hub mode without a connected PC (charging hub): After disconnecting the PC or with no PC connected, the hub can operate as a standalone charging USB hub when powered by a USB charger. Fast charging of mobile devices (including iPads) up to 2A per hub port. The total supplied current is limited by the external power adapter’s output. OS support: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 and later (all 32 and 64-bit Windows OS versions supported), Mac OS X 10.4.x and higher, Linux with kernel 2.6.x and above. Note: Drivers are included in supported operating systems and install automatically. No other drivers need to be installed or are available. Package contains: USB 3.0 hub with a permanently attached 120 cm cable, printed multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box.

The AXAGON HUE-SA7BP 7x USB3.0 ALU Charging Hub is a compact and durable USB hub that allows you to connect up to seven USB devices to your PC simultaneously. It features fast charging support on all USB ports, making it ideal for charging mobile phones, tablets, power banks, and other devices. The hub also has its own power, allowing it to handle multiple external disks and can even charge USB devices when the PC is turned off or disconnected. The hub comes with a 5V/2A power adapter and has LED indication for power supply connection.

The Axagon CRE-SM4N ID card reader is a secure device, for example, when logging in to the internet bank and digitally signing documents. It supports ATM/CAC/ID/IC/SIS cards. The ID card reader supports Windows, Linux, macOS and Android operating systems.You can communicate with government agencies, banks, and e-service providers at home or at work without leaving your computer. You can also use an ID card to enter almost all major e-service environments in Estonia, which is the safest and most convenient way to log in. It is no longer necessary to remember different passwords and usernames for different services, an ID card, a card reader, and an ID card PIN code are sufficient.

PCIe-3.0-Adapter für zwei M.2-SSDs, 1x M.2-NVMe- und 1x M.2-SATA-SSD, Größen bis 22110, ohne Kapazitätsgrenze, Low-Profile-Bracket inklusive

The AXAGON PCEM2-N internal adapter allows you to connect an M.2 SSD to a desktop computer via the PCI-Express bus. With its high-quality construction, compact size, and well-designed form factor, this adapter is an excellent choice for upgrading desktop computers that lack an M.2 slot. The adapter supports NVMe (PCI-Express) M.2 SSDs, including both single-sided and double-sided drives. There is no limit to the capacity of SSDs, and M.2 cards up to 22x80 mm in size can be used. Thanks to its PCI-Express interface, compatible with x4, x8, and x16 slots, maximum transmission rates can be achieved. The thermally conductive pad and copper-vented design aid in efficiently dissipating heat generated during M.2 SSD operation. LED indicators show the connection or data transfer status in the M.2 slot. The package also includes a low profile bracket for mounting the adapter in low profile cases.Input: • PCI-Express interface, compatible with PCI-Express versions: 4.0 / 3.0 / 2.1 / 2.0 / 1.1 / 1.0a.• Four-lane compatibility, works with x4 / x8 / x16 PCIe slots.Output: • NGFF 75-pin M-key slot for installing an NVMe (PCI-Express) M.2 SSDOther features: • Full Plug and Play support.• Supports M.2 drives in sizes 2230, 2242, 2260, 2280 mm.• Supports M key and B+M key NVMe (PCI-Express) M.2 SSDs without any maximum capacity limit.• Supports both single-sided and double-sided M.2 drives.• Enhanced heat dissipation with copper vents and thermally conductive pad.• Booting from an SSD card supported.• Dimensions: 105 x 49 x 8 mm.• Weight: 32 g.• No driver installation required.Supported operating systems: • MS Windows 7 / 8 / 8.1 / 10 / 11, Windows Server 2008 R2 / 2012 / 2016 (all 32- and 64-bit Windows versions supported), and Linux with kernel 2.6.31 or later.• Note: When using Windows 7, contact your M.2 SSD manufacturer to verify OS compatibility.

The AXAGON PCES-SA6 PCI-Express controller extends your desktop PC with six high-speed SATA III ports with a transmission rate up to 6Gb/s. The card equipped with ASMedia chipset not only supports SATA 3.0 specification, but also other SATA technologies such as Hot-Plug, Native Command Queue (NCQ), TRIM, or Port Multiplier. Easy installation without the need to install drivers on most operating systems. Included low profile bracket allow controller installation into standard and also low profile PC cases. Input: PCI-Express 3.0 interface, compatible with PCI-Express 1.0a / 1.1 / 2.0 / 2.1. Number of 2-Lane (x2) lines, compatible with x4 / x8 / x16 PCIe slots. The bandwidth of 2-Lane PCI-Express 3.0 bus 2 GB/s. Output: 6x independent Serial ATA port, SATA III 6G standard. 6x internal 7-pin SATA data connector. Supports all SATA I / SATA II / SATA III optical drives, SSDs and hard disks of all capacities. Other features: Full Plug and Play support. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with the ATA AHCI (Advanced Host Controller Interface) specification revision 1.4. Fully supports Hot Plug connecting and disconnecting of SATA devices while running. Supports Native Command Queuing (NCQ). TRIM feature support for SSD disks. Supports Port Multiplier Command Based Switching. The ASMedia ASM1166 chipset is used. Supported OS: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32- and 64-bit Windows OS versions), Linux with kernel 2.6.x and later. Package contains: PCI-Express SATA controller, low profile brackets, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

AXAGON STND-LQ is a stand with two joints for a laptop or tablet, which provides comfort and improves ergonomics at work. This stand is ideal for devices from 10" to 16". The joint mechanism allows you to adjust both height and angle in any combination. This makes it easy to find the perfect stand inclination for maximum relaxation of your neck and back muscles. Enjoy a comfortable working environment with a compact and portable stand that perfectly adapts to your needs, whether you’re working at home, in the office, or on the go. The base is made of durable aluminum castings that guarantee long life and reliability. Thanks to the non-slip finish, you don’t have to worry about unwanted movement—your device stays firmly in place without damaging the surface of the laptop or the stand. These carefully designed features ensure perfect stability for your laptop, tablet, or even your favorite book, giving you peace of mind and comfort during everyday use. A great benefit is the ingenious double-hinge solution, which lets you smoothly adjust the height of the laptop screen so it’s level with your external monitor. This creates an additional workspace at the correct eye level, greatly improving ergonomics and comfort at work and increasing your productivity. The stand can be easily folded to a compact size, making it convenient to carry wherever you need to go. Its elegant design not only complements your desk in style but also offers practical features you’ll appreciate in everyday use. Cutouts in the base ensure optimal heat dissipation from your laptop, enhancing its performance and durability. Thanks to the sophisticated design, you can easily adjust the tilt angle even while the device is in use, for maximum comfort and productivity during work. Features: Lightweight and strong metal construction. Anti-slip finish that also protects the device from scratches. Suitable for 10" - 16" laptops or other devices. Adjustable height up to 205 mm. Multiple adjustable positions. Adjustable base tilt (180° - 90°). Arm tilt adjustment (180° - 90°). Compact and easy to fold. Improved heat dissipation for notebook. Dimensions: 54 x 280 x 255 mm (W x H x D). Weight: 1065 g. Package contains: Stand for laptop / tablet, packed in a cardboard box.

AXAGON STND-LQB is a stand with two joints for a laptop or tablet, which ensures comfort and improves ergonomics at work. This stand is ideal for devices from 10" to 17.3". The joint mechanism allows you to adjust any combination of height and angle. This makes it easy to find the ideal stand inclination for maximum relaxation of your neck and back muscles. Enjoy a comfortable working environment with a compact and portable stand that adapts perfectly to your needs whether you're working at home, in the office or on the go. The base is made of durable aluminium castings guaranteeing long life and reliability. Thanks to the non-slip finish, you don't have to worry about unwanted movements your device stays firmly in place without damaging the surface of the laptop or the pad. These carefully designed features ensure perfect stability for your laptop, tablet or even your favourite book, giving you peace of mind and comfort during everyday use. A great advantage is the clever double-hinge solution, which allows you to smoothly adjust the height of the laptop screen to be flush with your external monitor. This gives you an additional work place at the correct eye level, which greatly improves ergonomics and comfort at work, while increasing your productivity. The stand can be easily folded into a compact size, making it convenient to carry wherever you need to go. Its elegant black design not only complements your desk in style, but also brings practical features you'll appreciate in everyday use. Cutouts in the base ensure optimal heat dissipation from your laptop, increasing its performance and durability. Thanks to the sophisticated design, you can easily adjust the tilt angle, even with the device currently in use, for maximum comfort and efficiency when working. Features: Lightweight and strong metal construction. Anti-slip finish, which also protects the device from scratches. Suitable for 10" 17.3" laptops or other devices. Adjustable height up to 205 mm. Many adjustable positions. Adjustable tilt of the laptop platform (0180°). Adjustable tilt of the arm (0180°). Load capacity designed for all types of laptops, max. 5 kg. Compact and easy to fold. The laptop holder enables better heat dissipation. Dimensions 280 × 255 × 54 mm (W x D x H). Weight 1065 g. Package contains: Stand for laptop/tablet, black version design, packed in a cardboard box.

Premium USB-C to USB-C data and charging extension cable AXAGON BUCM32-CF15AB SPEED+ EXTENSIONS USB 3.2 Gen 2 with USB-C male and USB-C female connectors. The cable is designed for very fast data transfer and charging of notebooks, phones, tablets, and other mobile devices. It enables high-speed extension for devices with short cables, such as multiport hubs and port replicators. You will not be limited by space or by the location of ports on the laptop. The cable supports data transfer speeds up to 20 Gb/s and also enables video transfer up to 8K/60Hz Full Ultra HD resolution and audio. The cable is compatible with charging technologies such as Power Delivery up to 240W (depending on the extension cable), Quick Charge, Samsung AFC, Huawei FCP, SMART, and others. Connected devices can be charged with up to 5A current. This durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface, and gold-plated contacts. The cable conductors are made of tin-plated oxygen-free copper. High-quality cable insulation made of flexible TPE guarantees maximum durability while maintaining sufficient flexibility. The nylon braid gives the cable exceptional strength. The 22AWG power wires (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. The 32AWG data wires, together with high-quality shielding, ensure reliable data transmission. Triple shielding protects transmitted signals from adverse interference. The nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable lifespan is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: USB-C (M) male USB-C (F) female Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and charging of the mobile device battery. SuperSpeed USB 10 Gbps - USB 3.2 Gen 2, also compatible with SuperSpeed USB 20 Gbps - USB 3.2 Gen 2x2. Backward compatible with USB 3.2 Gen 1 (formerly USB 3.1 Gen 1 / USB 3.0), USB 2.0. Supports 20 / 10 Gb/s (SuperSpeed+) second-generation transmission rates. Supports 20.000 / 10.000 / 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed+ dual-lane / SuperSpeed+ / SuperSpeed / High / Full / Low speed) transmission rates. Supports video up to 8K@60Hz Full Ultra HD resolution and audio transfer - a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3/4 port is required. Supported charging technologies: Power Delivery 2.0 / 3.0 / 3.1 240W (48V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging, and others. Supports fast charging with current up to 5A. The cable includes 22AWG power wires and 32AWG data wires. Tin-plated oxygen-free copper conductors reduce oxidation, increase conductivity, and provide a clear signal without distortion. Double shielding using galvanized foil and tinned copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable as an extension cable for laptops, tablets, mobile phones, and other devices with a USB-C connector, especially for multiport hubs, port replicators, and docking stations. The maximum extension length (cable + extension cable) is 2 m. Other data: cable length 1.5 m, outer cable diameter 5.0 mm. Package contains: USB-C M to USB-C F black cable, packed in a printed and sealed foil package with hanging hole.

The universal external AXAGON EEM2-SB2 RAW enclosure with a USB 3.2 Gen2 interface is designed for M.2 NVMe or SATA SSD drives. The double-sided USB-C connector on the enclosure ensures reliable connectivity. The package includes both a USB-C to USB-C cable for connecting the enclosure to a computer and a USB-C to USB-A adapter. You can connect the enclosure to any available USB port on your notebook. The second generation of the fast USB interface lets you take advantage of the speed of modern M.2 SSD drives. The transfer rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. This external M.2 enclosure also supports other modern features such as UASP, TRIM, and allows reading S.M.A.R.T. information to monitor the condition of the disk. Standby is supported when idle. A unique feature, thanks to the new chipset, is the ability to use both M.2 NVMe and SATA drives. You don't have to worry about which type of M.2 drive you install. An advantage is the support for three different SSD card lengths: 42, 60, and 80 mm. M.2 cards can be single-sided or double-sided, and there is no limit on the capacity of the inserted SSD. The tool-free enclosure opening makes installing and removing the M.2 SSD easy. Drive replacement is quick and convenient, expanding the enclosure's use—such as for data migration, testing, and more. The outer metal housing features a black, elegant brushed finish that prevents unwanted fingerprints. The enclosure's rounded design ensures comfortable handling. The aluminum enclosure, cooling holes, and the thermal conductive pad provide excellent cooling for the installed M.2 SSD, extending its lifespan and preventing the disk from slowing down due to "Thermal Throttling". By inserting an M.2 SSD, you'll easily create a fast, compact external disk. The enclosure can be used with computers and notebooks, as well as with smartphones and tablets. Input: USB 3.2 Gen 2 (USB 3.1 Gen 2) SuperSpeed USB 10 Gbps. Speed up to 10 Gbit/s. Connection via reversible USB Type-C female connector. Device support: NVMe M.2 SSD drives, SATA M.2 SSD drives, designed for M key and B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Compatible with USB 3.2 Gen 2, backward compatible with USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), USB 2.0. Supports transfer rates of 10,000 / 5,000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / HighSpeed). Supports M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs with no maximum capacity restriction. Supports M.2 drives in sizes 2242, 2260, 2280 mm. Supports both single-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), with bit rates up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total enclosure bandwidth/transfer rate is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). The real enclosure bandwidth/transfer rate is about 1000 MB/s (1 GB/s), due to the limitations of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and higher. Supports TRIM functionality to limit gradual degradation of SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) for monitoring disk status. SSD boot support in external enclosure. Hot Plug support allows device connection while running. Full Plug and Play support. Standby support - The drive sleeps after 5 minutes of inactivity. Powered via USB 3.0 bus up to 900mA from a single USB port (sufficient in all cases). Blue LED indicator signals connection to the computer's USB port (steady light) and data transmission (blinking). Robust aluminum body, cooling holes, and thermal conductive pad help cool the M.2 SSD. Higher enclosure surface temperature is not a defect—the aluminum body dissipates the disk's operating heat more efficiently into the environment. Connection via USB 3.2 Gen 2 Type-C female connector. Includes a USB Type-C male to USB Type-C male cable (20 cm) and USB Type-C female to USB Type-A male adapter. Other data: External enclosure dimensions: 94 × 41 × 10 mm. Weight: 35 g (without USB cable and M.2 SSD drive). Supported operating systems: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32-bit and 64-bit Windows OS versions supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher, Android (OS and device support required). Note: For Windows 7, check OS support and driver availability from the M.2 SSD manufacturer. Package contains: USB-C 3.2 Gen 2 combined external enclosure for SATA M.2 SSD, 20 cm USB-C to USB-C cable with USB-C to USB-A adapter, 1 thermal conductive pad, mounting material, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

The Telesin GP-JFM-003 backpack mount for sports camerasThe Telesin Action Camera Mount allows you to conveniently and securely mount your device on your backpack, belt or bag, so you can record stunning videos from unparalleled perspectives. The 360° swivel allows you to point the lens in any direction you want, and with the folding arm of the mount you can take a fantastic selfie.Enjoy a new original perspectiveGain a unique perspective and create immersive first-person view footage. Take a stunning selfie against a mountain panorama. Record a one-of-a-kind account of a forest hike. These and many more possibilities await you with the Telesin mount. It's 360° rotatable, easy to assemble and foldable - with its help you will take a lot of surprising shots!Securely mount your cameraThe heavy-duty serrated clip allows for a secure, stable and safe mount. Thanks to it you can be sure that your camera will not move on the backpack strap or fall off it. Compose even the most original shots and do not worry about anything!Compatible with various types of action camerasThe mount is compatible with a whole range of devices. With its help you will attach to the backpack sports cameras such as GoPro Hero 8, 7, 6 or 5, as well as DJI Osmo Action. It also allows you to mount Xiaomi Yi. The accessory is equipped with a standard GoPro interface - use the available for purchase separately waterproof shell or case to safely mount your camera.Packing listbackpack mount GP-JFM-003long screwinstruction manualBrandTelesinModelGP-JFM-003MaterialABS + metalWeight70gDimensions6 x 4 x 5 cmCompatibilityGoPro, Xiaomi, Eken, Sjcam sports cameras

High density single wave copper Barrow radiator Barrow 120mm x 30mm Copper Radiator – Dabel-30A 120

Baseus Big Mouth Pro car holder, clip-on, for dashboardMost car accidents are caused by a distraction of the driver and not looking at the roadway. With the Baseus Big Mouth Pro, you don't have to look away from the road anymore to - for example - look at the navigations..Driving safetyWith the dashboard holder, you can watch the road and the phone simultaneously. Keep your phone close at hand, answer calls and use the phone with one hand, constantly watching the road and holding the wheel.Highest qualityThe cradle is made of metal and is provided with rubber protective caps to prevent damage to the phone and cockpit. Big Mouth Pro is compatible with devices with screen diagonals up to 6.5".StableDespite its simple design, the handle is very stable and will hold your device during braking or driving on bumps.SpecificationBaseusNameBig Mouth Pro Car Mount（Applicable to centre console)Product codeSUDZ-A01MaterialMetal + ABSColourBlackCompatibilityFrom 4.7" to 6.5"Size38mm x 122mm x 75mm

Baseus Cafule Cable Baseus cable with a reinforced construction. It supports fast charging and data exchange up to 480mb/sec (e.g. with a computer). With two-sided Micro USB connector we do not have to worry while plugging the cable into the device. ProducentBaseusModelBaseus cafule Cable USB For Micro 2.4A 1M Gray+BlackProduct codeCAMKLF-BG1MaterialTPE, aluminium, nylonLength100 cmOutput current2.4A MAXColorGray + BlackCompatibilityDevices with Micro USB connector

Baseus Cafule CableBaseus cable with a reinforced construction. It supports fast charging and data exchange up to 480mb/sec (e.g. with a computer). With two-sided Micro USB connector we do not have to worry while plugging the cable into the device. ProducentBaseusModelBaseus cafule Cable USB For Micro 1.5A 2M Gray+BlackProduct codeCAMKLF-CG1MaterialTPE, aluminium, nylonLength200 cmOutput current1.5A MaxColorGray+BlackCompatibilityDevices with Micro USB connectors

Fast charging cable from BaseusThe cable is designed to charge laptops, tablets and phones from brands like Apple, Samsung, Huawei, Honor and Xiaomi. The USB-C to USB-C cable supports fast charging standards: Power Delivery, Huawei Super Charge 5A and Quick Charge 3.0 and 480Mbs data transmission.Solid finishWith its integrated design and zinc alloy material and UV coating, the cable is resistant to oxidation and color loss. The cable's plugs are durable and resistant to abrasion and oxidation so even after prolonged use, they will plug securely into the ports. The nylon braid provides extra protection, flexibility and strength, and makes it easy to store. In addition, the connection between the cable and the plug is reinforced with flexible TPE. A Velcro strap prevents tangles and helps keep the cable organized. In addition, the cable is available in four colours: white, purple, green and black. SafetyWith the use of smart charging technology, the cable protects your device from overcharging, over-discharge, overvoltage, overheating, overcurrent, short circuit and electromagnetic field, so both the cable and the device are protected. In addition, while charging, you can use your phone without worrying about the connector overheating which can damage the battery. In addition, the cable is equipped with Trickle mode so you can charge your phone at night without worry because when your device charges, the backup mode automatically turns on.ATTENTIONCable is not compatible with IPhone 15 series phonesModelCATJK-C01Rated power100W (5A/20V)Data transmission480 MB/sCable length1mMaterialZinc + nylonCompatibilitydevices with Type-C connectorColourblack

Fast charging cable from Baseus The cable is designed to charge laptops, tablets and phones from producers such as Apple, Samsung, Huawei, Honor and Xiaomi. The USB-C to USB-C cable supports fast charging standards: Power Delivery, Huawei Super Charge 5A and Quick Charge 3.0 and 480Mbs data transmission. Cable finish Thanks to its integrated design and zinc alloy material and UV coating, the cable is resistant to oxidation and color loss. The cable's plugs are durable and resistant to abrasion and oxidation so they will plug securely into ports even after prolonged use. The nylon braid provides extra protection, flexibility and durability, and makes it easy to store. In addition, the connection of the cable to the plug has been reinforced with flexible TPE. A Velcro strap prevents the cable from tangling and helps keep it organized. In addition, the cable is available in white, purple, green and black. Safety Using smart charging technology, the cable protects your device from overcharging, over-discharge, overvoltage, overheating, overcurrent, short circuit and electromagnetic field, so both the cable and the device being charged are protected. In addition, while charging, you can use your phone without worrying about the connector overheating, which can damage the battery. In addition, the cable is equipped with Trickle mode, so you can charge your phone at night without worrying, because when the device charges, the backup mode automatically turns on. ATTENTIONCable is not compatible with IPhone 15 series phones ModelCATJK-D01Power100W (5A/20V)Data transmission480 MB/sCable length2mFinishingzinc + nylonCompatibilityDevices with Type-C connectorColorblack

Baseus Cafule CableBaseus cable with a reinforced construction. It supports fast charging and data exchange up to 480mb/sec (e.g. with a computer). With two-sided Micro USB connector we do not have to worry while plugging the cable into the device. ProducentBaseusModelBaseus cafule Cable USB For Micro 1.5A 2M Red+BlackProduct codeCAMKLF-C91MaterialTPE, aluminium, nylonLength100 cmOutput current1.5A MAXColorRed+BlackCompatibilityDevices with Micro USB connectors

High-quality Baseus USB-C - USB-C cableThe Baseus cable allows extremely fast charging of all mobile devices with a USB-C input. It was made of high quality materials, so it is resistant to minor mechanical damage, breakage and abrasion.Fast chargingThe cable supports Quick Charge 3.0 ora Power Delivery 2.0 fast charging technologies, allowing you to charge your mobile devices quickly. It supports 100W charging making it possible to fully charge the Mate Book X Pro in just 2.5 hours and the iPad Pro 12.9 in 2 hours.High qualityThe Baseus brand cable is distinguished by its extremely high quality and high durability. The nylon braid further increases its resistance to breakage, abrasion and other minor mechanical damage. Charging safety is ensured by advanced chips that control the energy replenishment process.ManufacturerBaseusNameCafule PD2.0 100W flash charging USB For Type-C cable (20V 5A)Product codeCATKLF-AL91MaterialAluminium + nylon + TPEColourRed/blackLength2 mOutput current5 ATransmission speed480 MbpsOutput powermax. 100 W

Baseus Cafule CableBaseus Cafule is a high quality USB - USB Type C cable, designed for data transmission and device charging. Due to its reinforced construction, it has increased break resistance (additional protection on the cable at the plug, and a thicker braiding only available in the Cafule version). Additionally, materials reinforcing the structure of the plugs (e.g. aluminum) were used in the construction.ProducentBaseusModelBaseus Cafule Cable USB For Type-C 3A 1M Red+RedProduct codeCATKLF-B09MaterialTPE, aluminium, nylonLength100 cmOutput current3A MAXColorRedCompatibilityDevices with USB-C connectorsFunctionsData transfer, synchronization, charging

Baseus Cafule Cable The Baseus Cafule is a high-quality USB to USB Type-C cable designed for data transfer and device charging. Its reinforced construction makes it more resistant to breaking (featuring additional protection at the plug and a thicker braided exterior unique to the Cafule version). The construction also uses materials that strengthen the plug structure, such as aluminum. ManufacturerBaseus ModelBaseus Cafule Cable USB For Type-C 2A 2M Gray+Black Product codeCATKLF-CG1 MaterialTPE, aluminum, nylon Length200 cm Output current3A MAX ColorGray + Black CompatibilityDevices with USB-C connectors FunctionsData transfer, synchronization, charging

Baseus USB-C Cable The Cafule cable allows fast charging and data transmission. With Power Delivery 2.0 and Quick Charge 3.0 technology, the cable is able to charge devices equipped with these technologies, e.g. laptops, tablets and smartphones very quickly. The used USB-C plug allows you to connect practically all devices with a USB type C port. The use of aluminium tips and nylon braid ensures long durability of the accessory.

Baseus Cafule CableBaseus cable with a reinforced construction. It supports fast charging and data exchange up to 480mb/sec (e.g. with a computer). It allows for easy data transmission and safe charging of practically any device with USB Type-C input. Due to its short length (50 cm), it is perfect for use with a power bank.ProducentBaseusModelBaseus Cafule Cable USB For Type-C 3A 0.5M Red+RedProduct codeCATKLF-A09MaterialTPE, aluminium, nylonLength50 cmOutput current3A MAXColorRedCompatibilityDevices with USB Type-C connectorFunctionsData transfer, synchronization, charging

Baseus Cafule Cable Baseus Cafule is a high quality USB - USB Type C cable, designed for data transmission and device charging. Due to its reinforced construction, it has increased break resistance (additional protection on the cable at the plug, and a thicker braiding only available in the Cafule version). Additionally, materials reinforcing the structure of the plugs (e.g. aluminum) were used in the construction. ProducentBaseusModelBaseus Cafule Cable USB For Type-C 3A 1M Red+BlackProduct codeCATKLF-B91MaterialTPE, aluminium, nylonLength100 cmOutput current3A MAXColorRed+BlackCompatibilityDevices with USB-C connectorsFunctionsData transfer, synchronization, charging

Baseus CALYS-A02 USB to lightning fast charging cableBaseus CALYS-A02 USB to lightning cable allows you to quickly charge your phone. It also allows you to transfer files at speeds up to 480MB/s. Durable and resistant to damage - will serve you perfectly for a long time. It also comes with a practical strap, which makes it easy to store the cable and prevent it from tangling.Fast charges your phoneThe product supports 2.4 A fast charging. This means it can instantly charge your iPhone, allowing you to save time! No more waiting forever for your smartphone to be ready to go again - with Baseus, it only takes a few moments.You'll be copying your files in no timeThis practical cable not only allows you to charge quickly - you can also transfer files in no time. The transmission speed of 480MB/s will certainly meet your expectations. A 1GB movie can be copied in just 24 seconds! With the cable you can charge your phone and transfer data at the same time.For the safety of your smartphoneWith Baseus you don't have to worry about the safety of your iPhone either. The built-in smart chip will effectively protect it from damage. Cable provides stable voltage while charging. It also protects your phone against overcharging and overheating among other things.Solid, durable constructionThe cable consists of strands of reinforced, tin-plated copper. It is protected by a sheath made of durable ABS. Thanks to this, the cable is resistant to bending, breaking or tearing. What is more, the place which is extremely susceptible to damage - the connection between the cable and the connector - is additionally protected with a TPE shield. The product will surprise you with its reliable operation.BrandBaseusNameSuperior Series Fast Charging Data CableModelCALYS-A02TypeUSB to lightningMaterialABS + TPEColorWhiteCurrent2.4ATransmission speed480MB/sLength1m

Fast charging, fast data transmissionThe practical and durable Baseus cable for charging Apple products supports the Power Delivery fast charging system of up to 20W and is compatible with PD18W chargers. In addition, it also provides lightning-fast data transfer of up to 480 MB/S.Voltage controlThe cable is equipped with an innovative chip that intelligently detects whether a device has a fast charging system. Thus, it controls the voltage and uses the right one depending on the device it is connected to, thus protecting your device's battery and ensuring the most optimal charging possible.Strong and durableHigh user comfort and functionality have been ensured by using the highest quality materials. The five-band copper core has been protected with fire-resistant and durable polyethylene plastic, and the whole thing has been covered with an extremely damage-resistant ABS-type nylon weave. The zinc alloy used to cover the tip is resistant to discoloration and rust, and the rubber joints have been specially reinforced.ProducerBaseusNameHigh Density Braided Fast Charging Data CableModelCATLGD-02MaterialABS, High density braided wireColorWhiteLength1 mConnectorsUSB-C, LightningTransmission speed480 MB/s

Baseus Crystal Cable USB-C to LightningThe cable of this model is extremely functional and stylish. In addition, using it is very convenient. The product is also very durable and safe. There are several aspects to these things. One of them is fast and safe charging. This was achieved with a new core model, galvanized reinforcements, four wires, and a power of 2.4 A. The cable also has temperature control. It allows simultaneous charging and data transfer. It is durable through its built-in fabric, reinforced joint, and can withstand up to 3,000 and 10,000 times the insertion and withdrawal of plugs. Additionally, the cable is stylish with its material and glossy finish.Fast and secure loadingThe newer core model provides lower electrical resistance and fast charging. To further improve charging, the cable is made of galvanized reinforcement and a copper cable with four conductors. The power with which the cable can charge is 2.4 A. This allows you to shorten the waiting time for charging the phone. The cable prevents overheating. This is due to intelligent temperature control. You can be sure the charging will be safe. Data transfer and loading simultaneouslyThe device allows simultaneous loading and data transfer at a speed of 480 Mbps. To do this, you just need to connect the cable to your laptop or computer. This saves time and makes using the cable even more convenient. StyleThis practical device is not only functional but also stylish. It has a pleasant-to-the-touch aluminum material and a shiny cable finish. It is also available in several color variants. You can choose the one that suits you best and make a stylish gadget. StaminaThe fabric used to make the cable prevents tangling. Additionally, this fabric is resistant to stretching. The cable is sown in a reinforced connector through improved SR protection. It is therefore able to withstand over 10,000 turns. You have probably encountered many times, except that the charging cable breaks after some time when entering the phone. This product minimizes this risk. Inserting and removing the plug also consumes the charging cables. This model addressed this problem. The phone plug can be used for 3000 insertions and extensions. The other part of the cable has a capacity of up to 10,000 switching operations.BrandBaseusModelCAJY000205TypeUSB-C to LightningMaterialAluminium alloy + braided-fabric cablePowerPD 20WTransmission speed480MbpsLength1.2mColorPurple