Arvutitark OÜ

The ADATA XPG LANCER BLADE memory kit delivers performance and efficiency designed for demanding applications. With a total capacity of 32 GB, this DDR5 SDRAM memory module comprises two 16 GB modules, ensuring an optimized experience for gaming and multitasking. The memory operates at a data transfer rate of 6000 MT/s and is compliant with PC5-24000. With built-in Power Management IC (PMIC), on-die ECC, and support for Intel Extreme Memory Profiles (XMP 3.0) and AMD EXPO, this kit enhances stability and performance. The low-profile heatsink design allows for effective thermal management without occupying excessive space in the system.

The ADATA AX5U6000C3616G-DTLABWH is a kit of 2x 16 GB DIMM DDR5-6000 (PC5-48000) memory modules from the XPG Lancer Blade series. The total capacity is 32 GB (2x 16 GB). The 288-pin module supports a latency of 36, with a maximum frequency of 6000 MHz and requires 1.4 volts. Intel XMP version 3.0 and AMD EXPO are supported.

XPG Lancer Blade DDR5 Compact low-profile heatsinkLANCER BLADE features a low-profile heatsink that fits perfectly into smaller computer cases and does not interfere with the operation of tower CPU cooling systems. Improved power managementThe XPG LANCER BLADE DDR5 memory module has a built-in Power Management IC (PMIC) that increases power stability. Thanks to its lower operating voltage, the LANCER module is also more energy efficient than DDR4 memory. Stability and reliabilityWith built-in error correction code (ECC) technology, this module provides real-time error correction that increases stability and reliability. Made from high-quality materialsHigh-quality integrated circuits and printed circuit boards ensure uncompromising performance and stable overclocking, making this product a perfect solution for demanding gamers and overclockers. AMD EXPOReliability and stability thanks to AMD EXPO (Extended Profiles for Overclocking) support and compatibility with the latest platforms. Easier overclockingSupport for Intel XMP 3.0 profiles ensures easy overclocking without the need to configure complex BIOS settings. There is no need to repeatedly adjust and fine-tune overclocking parameters.

XPG PYLON II | For gaming | ATX 3.1 | 650 Watts | Cooling System 12cm fan | 80 PLUS BRONZE | MTBF 100000 hours | Colour Black

Ceramic technology provides even heat distributionDiameter: 19mmBrush for additional volume and perfect stylingRapid heating (PTC)Power indicator lightComfortable grip and ergonomic designRounded tip prevents burnsAbility to create various types of curls and wavesSwivel cordPower cord length: 167cmPower cord color: whiteNominal power: 25WMaximum power: 30WPower supply: 220V-240V ~50Hz

2 pressing cones for big and small fruits; Automatic On/Off

Paper insert for air fryerFor air fryers, ovens and microwaves100 pieces of disposable insertsUse at temperatures up to 240°CSize: 16x16x4.5 cmOil and water resistant, non-stickBiodegradableApproved for contact with food

3 speed levels; 90-degree oscillation; up-down adjustment; stable base.

ARGB CPU AIR COOLERPWM air cooling solution with a stylish Addressable RGB LED design. The Top Down Cooling design allows for more efficient heat dissipation. Compatible with Addressable RGB motherboards or hubs (H66F). Compatible with most current motherboard designs. Not compatible with Intel 2011 and 2066.Built-in RGB LED lighting adds a stylish flair to your rigCompatible with Addressable RGB motherboards or hubsTop Down Cooling design allows for more efficient heat dissipation and greater compatibility with casesTDP (Thermal Design Power) up to 110W Black coating on the fins increases the heat dissipation area and improves cooling efficiencyUpgraded high-efficiency fins for maximum thermal performanceWorks with most current AMD and Intel motherboard designs. Not compatible with Intel 2011 and 2066Socket LGA 1700 / 1200 / 115X / 775AM5 / AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2 / FM1

CS-107MINI TOWER CASE Featuring a stylish and compact design, this highly-efficient mini tower case takes up less space than your typical case. Mesh front panel design delivers improved air flow and ventilation while allowing for viewing of your front LED fans. Comes equipped with full acrylic side panel to showcase the inside of your rig. Compact chassis design makes this case perfect for office use Mesh front panel design allows for improved air flow and ventilation Full acrylic side panel showcases the inside of your rig Supports liquid cooling in the front of the case Supports air cooling in the front and rear of the case

LUX 650W 80+ Bronze ATX Power Supply 80Plus 230V EU Bronze Certified for up to 88%+ efficiency Built-in APFC (Active Power Factor Correction) with ratings over 0.9 Includes OPP/OVP/UVP/SCP electrical protection 30% increased ventilation area in the PSU body for improved airflow Silent 12cm black fan with optimized thermal fan speed control Compatible with all Intel form factors up to ATX12V Ver.2.4 Soft, black, flat cables for convenient cable management

Compact CPU cooler with 120 mm PWM fan, two copper heatpipes, good cooling performance with 115 W TDP, for AMD and Intel sockets A compact CPU cooler for complete systems or small cases Two 6 mm heatpipes dissipate heat efficiently A 120 mm PWM fan delivers up to 94.5 m³/h High speed of up to 2,000 at a maximum of 26.7 dB(A) For many common sockets from Intel and AMD The Aerocool Verkho 2 Plus: Efficient CPU cooling with a colorful touch The two 6 mm copper heatpipes are pressed directly onto the CPU, allowing them to absorb heat directly from the processor and then transfer it without detours to the countless aluminum fins. This process ensures very good cooling with conventional thermal paste. The pre-installed 120 mm PWM fan provides a strong airflow of up to 94.5 m³/h through the fine aluminum fins for fast and efficient heat dissipation. Despite its good cooling performance of 115 Watt TDP, the fan is quiet and operates at a maximum of 26.7 dB(A) when rotating at up to 2,000 rpm. In addition to its performance, the Aerocool Verkho 2 Plus also impresses with its now further expanded compatibility. With its mounting system, it offers simple and secure installation on sockets 1200, 1150, 1151, 1155, 1156, 775, AM4, AM3(+), AM2(+) as well as FM1 and FM2 from AMD and Intel. Technical details: Dimensions: 125 x 72 x 140 mm (W x H x D) Material: Copper (cooler base, heatpipes), aluminum (fins, cover plate) Color: Black, silver, blue Heatpipes: 2x Ø 6 mm TDP: 115 W Fan: Bearing: Hydraulic Type: 1x 120 mm PWM Dimensions: 120 x 25 x 120 mm (W x H x D) Noise level: 18.2 - 26.7 dB(A) Speed: 1,000 - 2,000 rpm Airflow: 49.4 - 94.5 m³/h Static pressure: 0.78 - 1.24 mmH2O Fan connector: 4-pin PWM MTBF: 60,000 hours Compatibility: Intel: LGA 1700 1200, 115x, 755 AMD: AM5 AM4, AM3+, AM3, AM2+, AM2, FM2, FM1

with 120 mm PWM fan, three copper heatpipes, good cooling performance with 125 W TDP, for AMD and Intel sockets Three 6 mm heatpipes dissipate heat efficiently A 120 mm PWM fan delivers up to 94,5 m³/h High speed of up to 2.000 at max. 26,7 dB(A) For many common sockets from Intel and AMD The Aerocool Verkho 3 Plus: Efficient CPU cooling with a colorful touch The three 6 mm copper heatpipes are pressed directly onto the CPU, allowing them to absorb heat directly from the processor and then transfer it without detours to the countless aluminum fins. This process ensures very good cooling with conventional thermal paste. The pre-installed 120 mm PWM fan, with a strong airflow of up to 94,5 m³/h through the fine aluminum fins, ensures fast and efficient heat dissipation. Despite its good cooling performance of 125 Watt TDP, the fan is quiet and operates at max. 26,7 dB(A) when rotating at a maximum of 2.000 rpm. In addition to its performance, the Aerocool Verkho 3 Plus also shines with its now even further expanded compatibility. With its mounting system, it offers simple and secure installation on sockets 1200, 1150, 1151, 1155, 1156, 775, AM4, AM3(+), AM2(+) as well as FM1 and FM2 from AMD and Intel. Technical details: Dimensions: 125 x 78 x 134 mm (W x H x D) Material: Copper (cooler base, heatpipes), aluminum (fins, cover plate) Color: Black, Silver, Blue Heatpipes: 3x Ø 6 mm TDP: 125 W Fan: Bearing: Hydraulic Type: 1x 120 mm PWM Dimensions: 120 x 25 x 120 mm (W x H x D) Noise level: 18,2 - 26,7 dB(A) Speed: 1.000 - 2.000 rpm Airflow: 49,4 - 94,5 m³/h Static pressure: 0,78 - 1,24 mmH2O Fan connector: 4-pin PWM MTBF: 60.000 hours Compatibility: Intel: LGA 1700 1200, 115x, 755 AMD: AM5 AM4, AM3+, AM3, AM2+, AM2, FM2, FM1

PWM air cooling solution powered by Heat Core Touch Technology (HCTT) with 4 ultra-efficient thermal heat pipes. Comes equipped with high-efficiency fins with a black coating for more effective heat dissipation. Capable of mounting a single 120mm fan configuration and works with most current motherboard designs.• Heat Core Touch Technology with 4 ultra-efficient thermal heat pipes• Upgraded high-efficiency fins with a black coating for maximum thermal performance• TDP (Thermal Design Power) up to 145W• Capable of mounting a single 120mm fan configuration• Compact profile for maximum compatibility• Compatible with most current motherboard designsSocket LGA 2066 / 2011 / 1700 / 1200 / 115X / 775AM5 / AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2 /FM1

RGB lighting, with 120 mm PWM fan, five copper heatpipes, strong cooling performance with 145 W TDP, for AMD and Intel sockets Five 6 mm heatpipes dissipate heat efficiently Integrated 120 mm PWM fan delivers up to 95.8 m³/h High speed of up to 2,000 at a maximum of 27 dB(A) Decouplers minimize vibration and therefore fan noise Blue RGB lighting customizes your build For many common Intel and AMD sockets The Aerocool Verkho 5 Dark: Cast a colorful shadow on compact systems The five 6 mm copper heatpipes are pressed directly onto the CPU, allowing them to absorb heat straight from the processor and then transfer it directly to the countless aluminum fins. This process ensures very good cooling with conventional thermal paste. The pre-installed 120 mm PWM fan provides a strong airflow of up to 95.8 m³/h through the fine aluminum fins for fast and efficient heat dissipation. The CPU cooler achieves its strong cooling performance of 150 watts TDP with the help of five fins that transfer heat optimally into the air. Even so, it remains quiet and does its job at a maximum of 27 dB(A) when spinning at up to 2,000 rpm. To further reduce noise, eight rubber decouplers are fitted to minimize vibrations transferred to the motherboard and case. The fan blades are transparent. Combined with blue LED lighting, the Verkho 5 Dark casts a colorful shadow into the interior of your system. Combined with other RGB lighting or on its own in matte black with an acrylic glass window, your processor becomes the eye-catcher of your PC. In addition to its performance, the CPU cooler also shines with its now even further expanded compatibility. With the mounting system, it offers easy and secure installation on sockets 2066, 2011, 1200, 1150, 1151, 1155, 1156, 775, AM5 AM4, AM3(+), AM2(+) as well as FM1 and FM2 from AMD and Intel. Technical details: Dimensions: 123 x 73 x 156.5 mm (W x H x D) Material: Copper (cooler base, heatpipes), aluminum (fins, cover plate) Color: Black, silver, blue Heatpipes: 5x Ø 6 mm TDP: 150 W Fan: Bearing: Hydraulic Type: 1x 120 mm PWM Dimensions: 120 x 25 x 120 mm (W x H x D) Noise level: 15 - 27 dB(A) Speed: 800 - 2,000 rpm Airflow: 46.2 - 94.5 m³/h Static pressure: 0.78 - 1.24 mmH2O Fan connector: 4-pin PWM MTBF: 60,000 hours Compatibility: Intel: LGA 170 1200, 115x, 755 AMD: AM5 AM4, AM3+, AM3, AM2+, AM2, FM2, FM1

Splitterkabel für adressierbares RGB-LED-Zubehör, Y-Kabel für 3-Pin-RGB-Header, 12 cm Kabellänge, kompatibel mit ASUS / ASRock / MSI

G-Nexus P1690 Degree 12VHPWR Adapter Innovative 12VHPWR connector that allows you to easily improve the aesthetic and cable management with a 90-degree 12+4-pin adapter. Supporting up to 600W of power.G-Nexus P16 90 Degree 12VHPWR Adapter • 12+4-pin to 12+4-pin • 90 degree connection • Supports up to 600W • Compact and aesthetic design • Better case spacing90 Degree Connection An angled connection eliminates the necessity for wire bending, preventing additional stress on both the cable and the graphics card connector. Our 12VHPWR connector follows the TYPE 1 configuration with the 4-pin on the backplate side, located above the 12-pins. Up to 600W Output Perfect for latest NVIDIA RTX 40 Series GPUs & ATX 3.0 PSUs with 16-Pin connectorBetter Case Spacing The compact design enables the use of smaller cases by providing improved panel clearance, all while maintaining an elegant appearance thanks to its stylish pattern.Compact and Aesthetic Design The compact design not only saves space for easier cable management but also retains its elegant appearance with a stylish pattern.Recommended Guide: - Refrain from utilising cables that are not standard configuration - Ensure adapters and cables are kept away from heat sources - Avoid daisy chaining or using additional adapter cables To prevent incorrect operation and the risk of the connector overheating and melting, it's essential to ensure a complete and secure connection between connectors. Application Right angle adapter for 12+4-Pin (male) connector to 12+4-Pin (female) connector Dimensions 21 x 39.6 x 29.5mm Connector 12+4-Pin (male) x1 12+4-Pin (female) x1 Max. Wattage Support 600W Product Code AK-CBPW29-BK Application Right angle adapter for 12+4-Pin (male) connector to 12+4-Pin (female) connector Dimensions 21 x 39.6 x 29.5mm Connector 12+4-Pin (male) x112+4-Pin (female) x1 Max. Wattage Support 600W Product Code AK-CBPW29-BK

G-Nexus P24 90 Degree 12VHPWR 12+4-Pin to three 8-Pin Adapter Innovative 12VHPWR connector that allows you to easily improve the aesthetic and cable management with a 90-degree 12+4-pin to three 8-pin adapter. Supporting up to 600W of power.G-Nexus P24 90 Degree 12VHPWR 12+4-Pin to three 8-Pin Adapter • 12+4-pin to three 8-pin • 90 degree connection • Supports up to 600W • Compact and aesthetic design • Better case spacing90 Degree Connection An angled connection eliminates the necessity for wire bending, preventing additional stress on both the cable and the graphics card connector. Our 12VHPWR connector follows the TYPE 1 configuration with the 4-pin on the backplate side, located above the 12-pins.Up to 600W Output Perfect for latest NVIDIA RTX 40 Series GPUs with legacy PSU’s. Compact and Aesthetic Design The compact design not only saves space for easier cable management but also retains its elegant appearance with a stylish pattern.Recommended Guide: - Refrain from utilising cables that are not standard configuration - Ensure adapters and cables are kept away from heat sources - Avoid daisy chaining or using additional adapter cables To prevent incorrect operation and the risk of the connector overheating and melting, it's essential to ensure a complete and secure connection between connectors.We highly recommend the use of 3 separate PCIe cables to connect with Power Supply Unit (PSU) for the best performance and safety. Application 12+4-Pin (male) konnektori parempoolne adapter kolmele 8-Pin (female) konnektorile Dimensions 26.5 x 67 x 31mm Connector 12+4-Pin (male) x18-Pin (female) x3 Max. Wattage Support 600W Product Code AK-CBPW30-BK

G-Nexus PX16 90 Degree 12VHPWR Cable Innovative 12VHPWR Connector. 12+4-pin extension cable, designed to easily extend your connection by 300mm. This enhances cable management, providing both convenience and flexibility.G-Nexus PX16 90 Degree 12VHPWR Cable • 12+4-pin to 12+4-pin extension cable • 90 degree connection • Supports up to 600W • Compact and aesthetic design • Better case spacing90 Degree Connection An angled connection eliminates the necessity for wire bending, preventing additional stress on both the cable and the graphics card connector. Our 12VHPWR connector follows the TYPE 1 configuration with the 4-pin on the backplate side, located above the 12-pins. Supports Up to 600W Supports up to 600W of power with the added reliability of 16 AWG for lower power loss. Perfect for latest NVIDIA RTX 40 Series GPUs & ATX 3.0 PSUs with 16-Pin connector.Better Case Spacing The compact design enables the use of smaller cases by providing improved panel clearance, all while maintaining an elegant appearance thanks to its stylish pattern.Compact and Aesthetic Design The compact design not only saves space for easier cable management but also retains its elegant and discrete appearance. Coupled with 300mm cable length for easy power connection.Recommended Guide: - Refrain from utilising cables that are not standard configuration - Ensure adapters and cables are kept away from heat sources - Avoid daisy chaining or using additional adapter cables To prevent incorrect operation and the risk of the connector overheating and melting, it's essential to ensure a complete and secure connection between connectors. Application Convert a 12+4-Pin (male) connector to 12+4-Pin (female) connector Length 300mm (without connector) Connector 12+4-Pin (male) x112+4-Pin (female) x1 Max. Wattage Support 600W Product Code AK-CBPW32-30BK

If you have a modern case with USB 3.1 device connectivity but your motherboard lacks the appropriate internal USB 3.0 header, this adapter can help you make full use of your case ports. With the approximately 40 cm long black cable from Akasa, you can convert the mainboard’s connector (USB 3.1, 19-pin, male) into a USB 3.0 connector (19-pin, male). Additionally, you can attach another cable to a USB 2.0 port to ensure backward compatibility of connected devices with USB 2.0. The cable supports the maximum possible transfer rates of up to 5 Gbit/s via USB 3.0. Technical details: Cable length: approx. 400 mm (including connectors) Color: Black Connections: 1x USB 3.1 internal (19-pin male) 1x USB 3.0 internal (19-pin male) 1x USB 2.0 internal (8-pin female)

The Akasa LED Strip Light Extension Cable is designed to extend the range of an RGB-LED product. Especially in large cases, the cables that come with the products can quickly reach their limits, which can be overcome with this cable. With 4-pin connectors on both ends, this is a 50-centimeter extension. The 4-pin RGB extension cable from Akasa has been specifically certified for use with motherboards featuring GIGABYTE RGB Fusion, MSI Mystic Light, and ASRock RGB LED. The connection can be made directly to the motherboard to control lighting effects within the case. The cable features a black design to remain as inconspicuous as possible. Technical Details: Length: 500 mm Color: Black Connectors: 1x 4-pin RGB male (12VGRB) 1x 4-pin RGB female (12VGRB)

LED strip light extension cable. RGB 4-pin male to 4-pin female connectors. Extends the reach of RGB LED lighting for your modding needs.

Internal ATX power supply adapter for external AC-DC power supplies, suitable for CPUs up to 65W TDP, compatible with ITX and UCFF systems, with 4-pin DIN power connector.

With the Akasa RGB splitter cable, you can easily expand the number of connected RGB LED products. Especially in large cases, you often reach the limits, as most motherboards do not have enough RGB headers. With this 50-centimeter splitter cable, you can connect up to four RGB LED products with a compatible 12VGRB LED connector to a single RGB header. The 4-pin RGB splitter cable from Akasa is compatible with motherboards featuring ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light, and ASRock RGB LED. The connection can be made directly to the motherboard to control the lighting effects within your case. The cable comes in black to remain as unobtrusive as possible. Technical details: Length: 500 mm Color: Black Connectors: 1x 12VGRB-5050 (4-pin) socket 4x 12VGRB-5050 (4-pin) plugs

The Akasa RGB LED extension is designed to extend the reach of an RGB LED product. Especially in large cases, the cables supplied with these products can quickly reach their limits, which can be overcome with this extension cable. With 4-pin connectors on both ends, it provides an extension of 30 centimeters in length. Additionally, two 4-pin male-to-male adapters are included in the package. The Akasa extension cable is specifically designed for use with motherboards that have a 4-pin RGB connector. It can be connected directly to the motherboard to control lighting effects inside the case. The cable is black to remain as inconspicuous as possible. Technical details: Length: approx. 300 mm Color: Black Connectors: 2x 4-pin RGB female (12VGBR) Package contents: 1x Akasa RGB extension cable 2x 4-pin male-to-male adapters

Practical splitter cable from Akasa that splits one RGB LED connector into four RGB LED connectors, 1x 4-pin RGB LED to 4x 4-pin RGB LED.

Quiet 120 mm PWM fan in white, addressable RGB lighting, up to 2,000 RPM, max. 89.9 m³/h airflow, max. 1.75 mmH2O static pressure

Powerful black CPU cooler with addressable RGB lighting, one 120 mm PWM fan, compatible with Intel and AMD sockets, 185 W TDP Black tower cooler from Akasa One 120 mm PWM fan Top cover and fan with addressable RGB lighting Four copper heatpipes for rapid heat dissipation Compatible with AMD and Intel sockets Supports tall RAM modules Powerful CPU air cooler with RGB lighting The Akasa SOHO H4 plus is an all-black CPU cooler in a single-tower design. The quiet 120 mm PWM fan delivers strong cooling performance. Its stylish design with top cover and addressable RGB lighting makes it an eye-catcher in any setup. The Akasa SOHO H4 plus is a powerful tower cooler for AMD and Intel sockets, with a TDP of up to 185 W. The four copper heatpipes ensure rapid heat dissipation. The 120 mm fan runs at 500 to 2,000 rpm and generates a very low noise level of no more than 31.8 dB(A), while delivering an airflow of 89.9 m³/h. High compatibility and RGB control On the top cover and the 120 mm fan, the tower cooler features addressable RGB lighting that illuminates the cooler in 16.7 million colors. The lighting is connected via a 3-pin RGB connector and can be synchronized with the rest of the setup. The lighting is compatible with GIGABYTE RGB Fusion, MSI Mystic Light, ASUS AURA, ASRock Polychrome, and Razer Chroma RGB. The Akasa SOHO H4 plus is compatible with many common AMD and Intel sockets. Thanks to its clever design, the cooler is also compatible with large RAM modules with tall heatspreaders. Technical details: Dimensions: 120 x 153.6 x 92 mm (W x H x D) Weight: approx. 704 g Material: copper (heatpipes), aluminum (fins), plastic (cover) Color: black TDP: 185 W Fan: Quantity: 1x 120 mm Bearing: hydrodynamic Speed: 500 - 2,000 rpm Airflow: 89.9 m³/h Static pressure: 1.75 mmH2O Noise level: 14.2 - 31.8 dB(A) Connector: 4-pin PWM Lighting: 3-pin addressable RGB, 3-pin RGB (5VDG, 5V) Current: 0.5 A / 0.13 A (LED / fan) Voltage: 5 V / 12 V (LED / fan) Life expectancy: 40,000 hours Compatibility: Intel sockets: LGA 1700, LGA115X, LGA1200, LGA20XX AMD sockets: AM4 AM5 Manufacturer warranty: 2 years

Internes USB 3.0-19-Pin-Verlängerungskabel von Akasa, 15 Zentimeter lang

This adapter enables the connection of a front panel USB Type-C port to a motherboard's internal 20-pin USB 3.0 header. It is particularly suitable for USB 3.1-compatible I/O front panels when these only have external ports that previously had to be connected to the external rear panel of the motherboard. Since those external ports would then not be available for other purposes, internal connection is generally recommended, which is now also possible (please observe motherboard specifications!). To use, the adapter is connected to the 20-pin USB 3.0 header and the cables from the I/O panel are attached accordingly. The adapter supports transfer rates of up to 5 Gbit/s, as specified by the USB 3.1 standard. Technical details: Connections: 1x USB 3.0 20-pin internal header 1x USB 3.1 Type-C 20-pin external header

Easily add vivid gold lighting to your desktop by connecting the LED strip via a molex 4-pin connector. The light strip comes with a magnetic attachment for easy installation and reusability. Length is 50cm.

What's New in the 5075 V3 Upgrade?The 5075 V3 delivers longer battery life, improved acoustics, and a built-in receiver for a more refined and convenient typing experience.PBT Double-shot KeycapsMade of PBT, with legends produced through a double-shot process—one of the most durable marking methods to prevent wear or discoloration with use.Built-in 8000mAh BatteryEnjoy uninterrupted typing, gaming, or productivity with a high-capacity 8000/10000mAh battery, with no need for constant recharging.Custom KnobA versatile knob allows easy control of volume, brightness, and custom functions. Smooth, tactile, and satisfying to use—perfect for both productivity and gaming.Gasket MountThe gasket-mounted structure provides enhanced flex, reduced vibration, and a deep, refined typing sound. Designed for comfort and acoustics, offering a premium typing feel favored by enthusiasts.5-pin Hot-swappableEasily swap mechanical switches without soldering. The hot-swappable sockets let you customize your typing feel, test different switch types, and fine-tune your keyboard setup in seconds.RGB BacklitEnjoy vibrant RGB illumination with multiple preset modes and full customization. Each key shines with individually addressable LEDs, giving your setup a stunning and immersive lighting experience.Side Light BarThe integrated side light bar adds a soft ambient glow to your desk, creating a premium RGB atmosphere that complements your main lighting effects and elevates your overall setup.Web & Cloud DriverFull customization for lighting, keys, and macros.

ALIENWARE TENKEYLESS GAMING KEYBOARD - AW420KCompact tenkeyless (TKL) form factor eliminates the 10-key numeric keypad to reduce clutter and improve portability. Integrated cable routing allows for easy adaptability, and Cherry MX Red switches provide consistent high-performance gaming.

Adapter for Alpenföhn Brocken 3 CPU cooler, adapted for AMD socket AM5, mounts on standard backplate.

Der Alpenföhn Brocken 4 ARGB ist ein leistungsstarker 230 Watt TDP Single Tower CPU-Kühler mit leisem 120 mm Jetstream Lüfter. Die 6x6 mm Heatpipes, ein großflächiger asymmetrischer Kühlkörper und ein aerodynamisch optimiertes Lamellendesign – der Brocken 4 vereint pure Leistungsfähigkeit bei nahezu lautlosem Betrieb auch bei anspruchsvollen Systemen. Durch die Anti Vibration Pads des JetStreams werden zudem jegliche Vibrationen auf ein Minimum reduziert. Das asymmetrische Design des Brocken 4 ARGB erlaubt maximale Flexibilität bei der Auswahl der RAM-Module. Das im Lieferumfang enthaltene Rock Mount 3 Montagesystem bietet einen sicheren Halt auf den Sockeln.

An extension cable for 4-pin PWM fans. Available in various lengths. Sleeving provides additional protection, stability and increased lifetime. Technical detailsLength15cmConnections4-pin to 4-pinMaterialPlastic, sleevedColorblack

Alphacool's 4-pin to 4x 4-pin Y-splitter cable is a high-quality solution to easily connect and control multiple PWM fans from the motherboard without the need for a separate fan control HUB. This cable is ideal for expanding the limited number of motherboard slots for these types of fans. With high-quality sleeving, the cable offers added protection, stability, and longer lifetime. The cable is offered in various lengths. Technical details Length 60cm Connections 1x 4-Pin to 3x 4-Pin PWM Material Plastic, sleeved Color white

Sleeved PWM Y-splitter cable, for connecting multiple PWM fans to one connector, 30 cm length, black.

A water cooling system consists of many different elements: pumps, radiators, cooling blocks, reservoirs, and often other components. To create a functional water cooling system, these parts need to be connected together. The easiest way to do this is with tubing. Here, the Alphacool AlphaTube HF tubing is the best choice.AppearanceAvailable in various vivid colors, transparent, and also UV-active options, the AlphaTube HF tube offers a large selection of colors and styles, making it easy to find the hose that best matches your taste.ApplicationThe AlphaTube HF tubing features ideal flexibility for easy installation. It is flexible enough to be laid effortlessly yet rigid enough so that it does not kink easily, even with tighter bending radii.Available in different sizes.We offer the AlphaTube HF hose in all common sizes.Technical data:Length: 1 mTube size: OD 13 mm / ID 10 mmMaterial: PVCHardness grade: 65-70 A-ShoreWorking temperature: -10 - 80°CBurst pressure: 8 barWorking pressure: 2 bar Download data sheet PDF: Alphacool tubing AlphaTube HF 13/10 (3/8"ID) - Ultra Clear 1m (3,3ft) Retailbox

The Alphacool Apex series represents maximum cooling performance, exceptional design, and premium material selection for high-end custom water cooling systems. The Alphacool Apex 1 is the first CPU water block in the Apex series and combines all its unique features in a robust CPU cooler.For the AMD AM5 version of the Apex 1 CPU cooler, Alphacool utilizes an offset cooler base that does not sit centrally on the CPU. This design ensures that the water injection is positioned directly over the CPU's hotspot, resulting in optimal cooling performance. Alphacool relies on its proven cross-slot technology and introduces the 3D Jetplate 2.0, an evolution of the original 3D Jetplate. The improved design of the Jetplate creates higher water pressure. Additionally, a pre-chamber located before the 3D Jetplate 2.0 calms the incoming water and evenly distributes it across the Jetplate and the cooling fins beneath the cooler base.The lower part of the Apex 1 CPU cooler is crafted from a solid block of copper. The connection section is made from brass, and both components are precisely CNC-machined from their respective material blocks. The cooler is assembled with an aluminum cover that nearly encloses the entire unit. Fine Apex design elements on the top surface allow the uniform illumination of the aRGB lighting to shine through. Moreover, an additional lighting element on the right side of the cooler emits a diffused glow towards the RAM slots.The Apex 1's cooling block is specifically designed to cover both the CPU socket and the mounting holes, giving it a sleek and seamless appearance. Despite this sophisticated design, installation remains straightforward: the cooler is positioned on the top of the motherboard while the backplate is secured from underneath using screws. Compatibility:AMD: AM5 Technical dataDimensions (L x W x H)100,00 x 86,00 x 32,30mmCooler materialNickel-plated copperMaterial cooler topAluminiumMaterial threadsNickel-plated BrassThreads2 x G1/4“Fin thickness0,4mmFin distance0,4mmMaximum operating temperature60 °CWeight995gColorBlack | Accent: ChromeWarranty: 5 years Warranty Terms

Case fan, all-metal housing, 120-millimeter format, PWM-controlled, 0-3,000 RPM, 117.21 m³/h airflow