Arvutitark OÜ

The Lian Li x DAN Case B4 Micro-ATX packs extensive hardware support into a compact 21.3-litre format. It is suitable for builds that require little space but are not intended to be a typical mini PC solution. A Micro-ATX motherboard, long graphics card, ATX or SFX power supply, and flexible cooling options fit into a case that can be positioned vertically or horizontally. The Wooden Edition combines aluminium mesh panels with a front made of genuine walnut wood.Compact SFF format: 21.3 litres of volume with Micro-ATX supportPlenty of room for GPUs: graphics cards up to 358 mm supportedFlexible power supply choice: dedicated brackets for ATX and SFX power suppliesAirflow layout: two addressable 120 mm fans pre-installedVersatile positioning: can be used horizontally or verticallyLian Li x DAN B4 Micro-ATX case: 21.3 litres of volume with extensive hardware supportLian Li x DAN B4 Wooden EditionThe Lian Li x DAN B4 uses its 21.3-litre volume efficiently. It supports Micro-ATX motherboards, graphics cards up to 358 mm long, and CPU coolers up to 166.5 mm high. This makes the case suitable for compact gaming and workstation systems that are intended to include more than basic hardware.ATX or SFX: power supply choice to suit the cooling setupPower supply bracket in the B4Depending on the cooling configuration, you can install an ATX power supply up to 140 mm or an SFX power supply. Dedicated brackets are provided for both options. This allows you to configure the case either for maximum compatibility or for more space for water cooling.The power connection is designed for different case orientations. The rotatable AC connector makes cable routing easier: in horizontal operation, it faces outward; in vertical operation, excess cable length can be accommodated inside the case.Position vertically or horizontallyThe B4 can be used vertically or horizontally depending on your workspace and setup. For a vertical configuration, you can add the separately available Lian Li Vertical AeroDeck. It expands fan capacity and creates a direct airflow path to the graphics card.Cooling in the Lian Li x DAN B4: plan air and water cooling flexibly2x 120 mm fans pre-installedFront fan can be used as an intake in combination with air coolersRadiator up to 360 mm with an SFX power supply or up to 140 mm with an ATX power supplyThe B4 offers several options for air and water cooling. Two 120 mm fans are already installed. In addition, you can install 120 mm fans in the lower and front areas. The front fan is mounted on a removable bracket and can also be oriented as an intake when using an air cooler.Radiator support depending on the power supply configurationFor water cooling, the available space depends on the choice of power supply. With an SFX power supply, you can install a 360 mm radiator. With an ATX power supply, a 140 mm radiator is possible. This allows you to tailor the case specifically for air cooling, compact AiO solutions, or more radiator surface area.Black Walnut Edition: mesh, steel frame and genuine walnut woodB4 Black Walnut material mixThe combination of mesh, steel and walnut wood provides a premium appearance without losing sight of functionality. The B4 m-ATX is designed for airflow and the best possible cooling of your hardware in both orientations—regardless of whether it is placed horizontally or vertically on the desk.

Compatible with the latest Intel and AMD CPUs Large 360 mm radiator for heat dissipation Three powerful SL-INF fans included Innovative 45-degree radiator fittings Improved pump design for increased water flow Stunning ARGB lighting on both CPU block and fans Updated Design for Superior Performance The Lian Li Galahad II Trinity SL-INF features several enhancements over its previous generation to deliver outstanding cooling capability. Starting with the cooling plate, the fin stack is now both taller and wider, providing a greater surface area for heat transfer. The fins are also spaced further apart to increase the flow rate through the stack. Furthermore, to lower water resistance within the loop, the Galahad II Trinity uses pipes that are 20% larger than the last generation. In addition, Lian Li has reduced the number of sharp corners the water travels through, including the use of innovative 45-degree radiator fittings. This change not only reduces water resistance but also simplifies radiator installation. Advanced Fan Design The Galahad II Trinity SL-INF AiO includes three of Lian Li’s impressive 120 mm SL-INF fans. Each delivers exceptional cooling performance, producing 61.3 CFM of airflow with a static pressure of 2.66 mmH2O. This is achieved through their advanced blade design and the ability to reach speeds up to 2,100 RPM. Despite this power, they remain whisper quiet at just 29 dB(A). For aesthetics, Lian Li ensures these fans look great from every angle. Using a single cable hidden within the radiator frame, all three fans can be linked together for unified control. Vibrant ARGB Lighting Alongside its outstanding cooling, the Lian Li Galahad II Trinity SL-INF AiO also offers striking aesthetics. The CPU pump includes three ARGB caps, each with its own distinctive style. The first, Duo-Infinity, features aluminum housing surrounding a beautiful infinity mirror with the Lian Li logo at the center. Next, the Dazzle cap has two separate lighting areas—a diffuser housing and a central light—allowing two different colors to be displayed at once. The Sink-Hole cap combines both designs, featuring the ARGB diffuser and an infinity mirror center for a unique lighting effect. In addition, the Galahad II Trinity SL-INF comes with three of Lian Li’s striking SL-INF fans. These fans include three unique infinity mirrors located at the hub and along the edges of the fan frame. They also feature dazzling RGB lighting on both the blades and frame, with each zone controllable individually to create a custom look. Lian Li makes controlling the Galahad II Trinity SL-INF’s lighting simple. The CPU pump acts as a Lian Li ARGB controller, letting the cables closely follow the pipes for a clean installation. The cooler can also be easily synchronized with other RGB products via its 5V ARGB port. All components can be managed using Lian Li’s L-Connect 3 software, allowing you to configure lighting as well as fan and pump speeds. Technical Details: Color: Black Radiator: Dimensions: 397.5 x 119.2 x 27 mm (L x W x H) Material: Aluminum, Plastic Water Cooling Pipe Length: 385 mm, sleeved Fans: 3x 120 mm Dimensions: 120 x 120 x 26 mm (L x W x H) Fan Bearing: Fluid Dynamic Bearing Connectors: 4 Pin PWM / 3 Pin ARGB (5VDG) Speed: 2,100 RPM Airflow: 61.3 CFM Air Pressure: 2.66 mmH2O Fan Noise: 29 dB(A) Life Expectancy: 40,000 hours Rated Voltage: 12V DC Cooler/Pump: Dimensions: 87.1 x 74 x 62 mm (L x W x H) Pump Motor Speed: 3,200 RPM Noise Level: Unknown Connector: 3 Pin Lighting: ARGB, 3-Pin RGB (5VDG, 5V) Life Expectancy: 70,000 hours Rated Voltage: 12V DC Compatibility (Socket): Intel: LGA 1700, LGA 1200, LGA 115X AMD: AM5, AM4

Compact ATX case, excellent airflow, 45.5 liters volume, plenty of space for hardware, integrated cable management M-ATX sized case with ATX compatibility Includes 2 x 140mm ARGB fans at the front and 2 x 120mm PWM fans above the PSU shroud for maximum out-of-box cooling Fully ventilated mesh panels on the front, top, and bottom, ensuring excellent airflow Front-mounted PSU with side-facing connector ports for easy cable management Motherboard tray position redesigned to improve top radiator clearance and locate bottom fans directly under the GPU for better cooling GPU anti-sag bracket with vertical and horizontal adjustment to support different GPUsCOMPACT POWERHOUSE Though compact in size, the LANCOOL 207 offers remarkable compatibility, supporting ATX motherboard, a 360mm radiator, ATX PSU, and GPU up to 375mm, all within the sleek 45.5L chassis.SPACE-SAVING INNOVATIVE LAYOUT The LANCOOL 207’s unique offset motherboard tray provides a space-efficient solution while improving compatibility and airflow.

Compact ATX case, excellent airflow, 45.5 liters volume, plenty of space for hardware, integrated cable management M-ATX sized case with ATX compatibility Includes 2 x 140mm ARGB fans at the front and 2 x 120mm PWM fans above the PSU shroud for maximum out-of-box cooling Fully ventilated mesh panels on the front, top, and bottom, ensuring excellent airflow Front-mounted PSU with side-facing connector ports for easy cable management Motherboard tray position redesigned to improve top radiator clearance and locate bottom fans directly under the GPU for better cooling GPU anti-sag bracket with vertical and horizontal adjustment to support different GPUsCOMPACT POWERHOUSE Though compact in size, the LANCOOL 207 offers remarkable compatibility, supporting ATX motherboard, a 360mm radiator, ATX PSU, and GPU up to 375mm, all within the sleek 45.5L chassis.SPACE-SAVING INNOVATIVE LAYOUT The LANCOOL 207’s unique offset motherboard tray provides a space-efficient solution while improving compatibility and airflow.

With the LANCOOL 217 from Lian Li, you bring style, functionality, and performance into perfect harmony. This mid-tower case combines a natural wood look with powerful cooling and offers everything you need for modern PC builds – including pre-installed fans, a flexible layout, and wide motherboard compatibility. Wood meets high-end: Black with walnut accents 5 pre-installed fans: High-performance cooling straight out of the box Back-Connect-ready: Compatible with motherboards featuring rear connectors Flexible power supply mounting: Standard and rotated modes for more space and better airflow Tool-less fan mount: Quick and easy installation thanks to retaining clips Lian Li Lancool 217 in black: A case that combines design and performance demands The LANCOOL 217 impresses with its successful combination of solid steel, tempered glass, and decorative real wood elements. The perforated mesh front not only ensures maximum airflow but also completes the organic design. With its spacious interior layout, the case supports motherboards up to SSI-EEB, GPUs up to 380 mm in length, and CPU coolers up to 180 mm in height. Excellent cooling for high-end hardware The five pre-installed fans provide powerful airflow straight from the factory. You can flexibly choose between a GPU- or CPU-focused cooling scenario by simply adjusting the fan positions. Magnetic dust filters and tool-free installation make assembly easier, keep your setup clean, and ensure you can clean your system quickly and easily. PC case with easy installation of your components Another highlight of the LANCOOL 217 is the removable radiator bracket: It makes installing AIO water cooling with up to 360 mm radiators easier and creates extra space when installing hardware. Two power buttons in different locations make it easier to turn your PC on, depending on whether it sits on or under your desk. Thanks to thoughtful solutions such as the vertically mountable PCIe slot, HDD/SSD combination options, and generous cable management, the LANCOOL 217 is the perfect choice for style-conscious PC enthusiasts with high expectations.

White mesh front for Lian Li Lancool II, as a replacement or for exchange, with fine mesh for optimal airflow, also serves as a dust filter

Completely white and modular midi-tower, with front and side panel made of tempered glass, side and top made of aluminum, for up to 9 fans, 2x 3.5/2.5 inch and 2x 2.5 inch, 1x USB 3.1 Type C / 2x USB 3.0 Type A. 4 DRIVE CAPACITY ADEQUATE AIRFLOW DUST MANAGEMENT MODULAR BACK PANELMODULAR PUMP STAND ALUMINUM MATERIAL DUAL CHAMBER DESIGN CONFIGURATION OF YOUR CHOICE MODULAR BACK PANELDecide how many expansion slots you need. Calculate the size of your fans & accessories. Pick your motherboard type. 3 kinds of back panels to meet your demand!5 slot 7 slot 3 slot SIDE RADIATOR CONFIGURATION WITH LONG GPU The 30mm space behind the side fan / radiator bracket allows users to mount fans, thus efficiently intake fresh air to directly cool the radiator and leaves enough space to install long GPUs in this compact case. WITH WATER COOLING IN MIND MODULAR PUMP STANDFriendly to custom water cooling users, the three different pump stands included can accommodate different scenarios. FLAT PUMP STAND IDEAL FOR MOUNTING THE PUMP DIRECTY AT THE BOTTOM OF THE CASE. ELEVATED PUMP STAND MOUNTING THE PUMP NEXT TO THE 240/280MM RADIATOR. EASILY MATCH INTERFACE.FLOATING PUMP STAND MOUNTING ABOVE A 120MM FAN ON A RADIATOR. EASILY MATCH INTERFACE. THE POWER BUTTON FINE GROOVES ARE GREAT TO THE TOUCH.1. White Silkscreen 2 Silver Screws 3. White Dust Filters 4. White Coated Aluminum 5. Light Grey Rubber GrommetsA SERIES OF O11 DYNAMIC As a member of the O11 family, the O11D Mini is designed to support a maximum number of radiators to optimize the water-cooling potential, and this even with a smaller frame.O11D MINIDUAL-CHAMBER DESIGN FOR CABLE MANAGEMENT Carried from the design of the O11D series, cables quickly pass to the second chamber through rubber grommets. Multiple tie points and Velcro strap channels are provided to tidy up the cables while the SSD mounting bar helps keep the loose cables all snuggled up to ensure a clean look and prevent the right-side panel from not closing or bulging.SECOND CHAMBER WITH 4 DRIVES CAPACITY SSD Mounting Bar 2 x 2.5” SSD can be positioned at the front or back of the bar.Drive Caddy Optimized storage space for 2 x 3.5” HDD or 2 x 2.5” SSDCOMPLETE DUST PROTECTION All 3 ventilation intake sides are equipped with magnetic dust filters and a removable dust tray to prevent the dust from entering the case. DIMENSIONS (D) 420mm × (W) 269.5mm × (H) 380mm MOTHERBOARD E-ATX (Max 280 mm wide) / ATX / Micro-ATX / Mini-ITX PSU SFX / SFX-L MATERIAL Steel4 mm Tempered Glass2 mm Aluminum (top and left panel) FAN SUPPORT Top: 3 × 120mm or 2 × 140mm Side: 2 × 120mm or 2 × 140mm Bottom: 3 × 120mm or 2 × 140mm Rear: 1 × 120mm RADIATOR SUPPORT Top: 360mm or 280mm or 240mm or can’t mount Side: 240mm or 280mm radiator Bottom: 360 or 280mm or 240mm radiator GPU LENGTH CLEARANCE 395mm CPU COOLER HEIGHT CLEARANCE 170mm VGA Length 370mm DRIVES Right side 2 × 2.5" SSD + back plate 2 × 3.5" HDD (or SSD) EXPANSION SLOTS 3 or 5 or 7 slots (depends on back panel) IO PORTS 2 × USB 3.0, 1 × USB 3.1 TYPE-C, 1 × HD Audio, Power Button DUST FILTERS 1 × Top, 1 × Bottom, 2 × Side

With the Lian Li O11 Dynamic Mini V2 Flow, your gaming setup is sure to stand out: Despite its compact design, this mini case offers a spacious interior with enough room to make your vision a reality. Whether you opt for air cooling, an AiO water cooling system, or vertical GPU installation—this case can handle it all and much more. Compact design: Takes up less space on your desk Room for high-end hardware: Generously designed interior allows the installation of powerful components Clean cable management: Cable holders and support for motherboards with back-connect design for tidy cable routing Includes GPU brackets: Graphics card can be installed vertically or horizontally Dust protection: Easy-to-clean dust filters at multiple locations Five pre-installed fans: Three 120 mm reverse-blade fans at the bottom and two on the side The Lian Li O11 Dynamic Mini V2 Flow: A mini case designed for high-performance gaming hardware Lian Li O11D Mini V2 Flow with sample hardware Featuring tempered glass on the side and front, the Lian Li O11 Dynamic Mini V2 Flow lets you showcase your hardware. Its compact size allows it to sit comfortably on your desk and become the centerpiece of your gaming setup—all without annoying cable clutter inside the case. Clean cable management for a tidy look Lian Li O11D Mini V2 in white with cable straps Thanks to multiple cable holders, the case enables clean cable routing. A built-in bracket for the heavy 24-pin ATX cable ensures it stays neatly in place, while cleverly positioned straps keep all other cables organized. The drive cages can also double as a hiding spot for cables. This makes cable management effortless—perfect for both beginners building their first gaming PC and pros tired of spending hours on cable routing. Flexible installation for motherboards and AiO water coolers A vertically adjustable motherboard standoff offers you more flexibility when installing the motherboard and AiO water coolers. You can choose between two motherboard positions: The top position supports 240 mm and 360 mm AiO liquid coolers, while the bottom position also allows for a 280 mm radiator. Well cooled, even under full load Supports up to nine fans Space for two water cooling radiators Mesh panel on the top Dust filter on the bottom The fans and radiators provide sufficient cooling for your gaming hardware, even under maximum load. A mesh panel and dust filter help reduce dust build-up inside the case, prolonging the life of your components. Lian Li O11D Mini V2 Flow fans The Flow version of the O11D Mini V2 comes with five fans pre-installed. These 120 mm fans feature reverse blades, ensuring a clean look without sacrificing essential airflow.⁣ Ready for peak performance with enough space for large GPUs The interior of the tower is designed to accommodate even large graphics cards up to 400 mm in length—whether mounted horizontally or vertically. The included GPU brackets ensure a secure hold in both scenarios, giving you the freedom to choose your preferred GPU orientation. Supports motherboards in Mini-ITX, mATX, and ATX form factors—including models with rear cable management using a back-connect design. Combined with well-thought-out cable holders and Velcro straps, the result is a tidy, clean look with all cables elegantly routed to the back of the motherboard. Modular I/O panel Lian Li O11D Mini V2 I/O panel The I/O panel module can be attached either on the top or at the bottom front. This lets you place the case wherever you want and still have easy access to the button and ports. If you position the panel on the top, the bottom cover is also removable—improving airflow.

Compact showcase midi tower in white, featuring 5x reverse infinity fans + 1x UNI FAN SL-INF 120, dual-chamber design for clean builds, supports up to 9 fans & radiators, 40 ARGB LEDs per fan with infinity effect, vertical & horizontal GPU mounting included With this bundle featuring the Lian Li O11 Dynamic Mini V2 in White, 5x UNI FAN SL-INF 120 Reverse Blade, and 1x UNI FAN SL-INF 120, you can build a compact high-end showcase with impressive cooling performance and spectacular RGB visuals. Despite its space-saving dimensions, the case offers ample room for powerful hardware, while the infinity fans perfectly showcase your system. O11 Dynamic Mini V2 in White with tempered glass on the front and side 5x UNI FAN SL-INF 120 Reverse Blade for a uniform infinity look 1x UNI FAN SL-INF 120 for additional airflow Graphics cards up to 400 mm can be mounted horizontally or vertically Back-connect support for especially neat cable management Daisy-chain connector system for minimal cable clutter O11 Dynamic Mini V2 – Compact, flexible, powerful The Lian Li O11 Dynamic Mini V2 combines a compact format with high hardware compatibility. It supports Mini-ITX, mATX, and ATX motherboards – including models with a back-connect design for an especially clean look. Large graphics cards up to 400 mm can be mounted both horizontally and vertically. Suitable GPU brackets are already included. Thanks to well-designed cable holders, Velcro straps, and a clever layout, your build stays tidy and organised. Note: The Lian Li O11 Dynamic Mini V2 is not compatible with the Lian Li GALAHAD II TRINITY PERFORMANCE AiO water cooling system. Powerful cooling performance with up to nine fans The case can accommodate up to nine fans as well as multiple radiators. A mesh panel on the top and a dust filter on the bottom ensure optimal airflow and protect your components over the long term. The vertically adjustable motherboard standoff allows flexible radiator positioning – ideal for AiO or custom water cooling setups. UNI FAN SL-INF 120 Reverse Blade – Uniform infinity look The Reverse Blade variant creates reversed airflow while the visible side with the infinity mirrors faces outward. This keeps your build visually perfectly coordinated – even with different airflow configurations. With up to 2,100 RPM, 108.05 m³/h airflow volume, and 2.02 mmH2O static pressure, the reverse fans are excellent for radiators and case ventilation. UNI FAN SL-INF 120 – Quiet performance with strong pressure The additional UNI FAN SL-INF 120 is a strong complement to your setup with 104.14 m³/h airflow volume and 2.66 mmH2O static pressure – all at only 29 dB(A) under full load. All fans feature 40 digitally addressable RGB LEDs and can be conveniently controlled via the L-Connect 3 software. Clean installation thanks to daisy-chain system The modular connector system links multiple fans directly via integrated pin contacts. Power, PWM, and ARGB signals are internally passed on – for particularly tidy cable management without unnecessary cable clutter. Note: The connector system of the SL-INF series is only compatible with SL-INF components and cannot be combined with the SL or AL series.

Modular Midi-Tower in black, with front and side panels made of tempered glass, side and top made of aluminum, for up to 9 fans, 2x 3.5/2.5 inch and 2x 2.5 inch, 1x USB 3.1 Type C / 2x USB 3.0 Type A. 4 DRIVE CAPACITY ADEQUATE AIRFLOW DUST MANAGEMENT MODULAR BACK PANELMODULAR PUMP STAND ALUMINUM MATERIAL DUAL CHAMBER DESIGN CONFIGURATION OF YOUR CHOICE MODULAR BACK PANELDecide how many expansion slots you need. Calculate the size of your fans & accessories. Pick your motherboard type. 3 kinds of back panels to meet your demand!5 slot 7 slot 3 slot SIDE RADIATOR CONFIGURATION WITH LONG GPU The 30mm space behind the side fan / radiator bracket allows users to mount fans, thus efficiently intake fresh air to directly cool the radiator and leaves enough space to install long GPUs in this compact case. WITH WATER COOLING IN MIND MODULAR PUMP STANDFriendly to custom water cooling users, the three different pump stands included can accommodate different scenarios. FLAT PUMP STAND IDEAL FOR MOUNTING THE PUMP DIRECTY AT THE BOTTOM OF THE CASE. ELEVATED PUMP STAND MOUNTING THE PUMP NEXT TO THE 240/280MM RADIATOR. EASILY MATCH INTERFACE.FLOATING PUMP STAND MOUNTING ABOVE A 120MM FAN ON A RADIATOR. EASILY MATCH INTERFACE. THE POWER BUTTON FINE GROOVES ARE GREAT TO THE TOUCH.A SERIES OF O11 DYNAMIC As a member of the O11 family, the O11D Mini is designed to support a maximum number of radiators to optimize the water-cooling potential, and this even with a smaller frame.O11D MINIDUAL-CHAMBER DESIGN FOR CABLE MANAGEMENT Carried from the design of the O11D series, cables quickly pass to the second chamber through rubber grommets. Multiple tie points and Velcro strap channels are provided to tidy up the cables while the SSD mounting bar helps keep the loose cables all snuggled up to ensure a clean look and prevent the right-side panel from not closing or bulging.SECOND CHAMBER WITH 4 DRIVES CAPACITY SSD Mounting Bar 2 x 2.5” SSD can be positioned at the front or back of the bar.Drive Caddy Optimized storage space for 2 x 3.5” HDD or 2 x 2.5” SSDCOMPLETE DUST PROTECTION All 3 ventilation intake sides are equipped with magnetic dust filters and a removable dust tray to prevent the dust from entering the case. DIMENSIONS (D) 420mm × (W) 269.5mm × (H) 380mm MOTHERBOARD E-ATX (Max 280 mm wide) / ATX / Micro-ATX / Mini-ITX PSU SFX / SFX-L MATERIAL Steel4 mm Tempered Glass2 mm Aluminum (top and left panel) FAN SUPPORT Top: 3 × 120mm or 2 × 140mm Side: 2 × 120mm or 2 × 140mm Bottom: 3 × 120mm or 2 × 140mm Rear: 1 × 120mm RADIATOR SUPPORT Top: 360mm or 280mm or 240mm or can’t mount Side: 240mm or 280mm radiator Bottom: 360 or 280mm or 240mm radiator GPU LENGTH CLEARANCE 395mm CPU COOLER HEIGHT CLEARANCE 170mm VGA Length 370mm DRIVES Right side 2 × 2.5" SSD + back plate 2 × 3.5" HDD (or SSD) EXPANSION SLOTS 3 or 5 or 7 slots (depends on back panel) IO PORTS 2 × USB 3.0, 1 × USB 3.1 TYPE-C, 1 × HD Audio, Power Button DUST FILTERS 1 × Top, 1 × Bottom, 2 × Side

Compact dual-chamber midi-tower, developed by Lian Li and PCMR, three sides with seamless tempered glass, alternative case cover for better cooling, supports 3x 360-mm radiators simultaneously, up to 11x 120-mm fans, 1x USB-C 3.1 and 2x USB-A 3.0 on the front panel Two top panel options: mesh or tempered glass Vision mode with tempered glass for an uninterrupted view of components Mesh mode with fan bracket for additional radiator or fan support Supports up to 11 fans and a maximum of 360mm large radiator Compatible with back-connect ATX motherboards Hidden AIO tube design for a streamlined appearance Dual-chamber layout with cable management compartment and cable holdersIN COLLABORATION WITH PCMRThe O11 VISION COMPACT is a collaboration with PC Master Race (PCMR), which is a smaller iteration of the original O11 VISION. With a customizable mesh top panel and support for back-connect ATX motherboards, this case is designed for ultimate flexibility. The main tenet of PCMR is freedom and customization, and the O11 VISION COMPACT enables it, by allowing the user to build the ultimate battlestation, tailored to their individual preferences. Enjoy enhanced stability with the removable GPU bracket and experience concealing cable management for the cleanest look. The unobstructed view for the optimal showcasing of the components without clutter sets a new benchmark in DIY aesthetics. The O11 VISION COMPACT embodies the spirit of LIAN LI and PCMR, providing PC enthusiasts the opportunity to create their finest masterpiece.UNOBSTRUCTED HARDWARE SHOWCASE O11 VISION COMPACT enhances your setup with its unique swappable top panels and concealed AIO tubing design, giving your chassis a standout and elegant look.Aluminum with White Powder Coating Outer Corner White Silkscreen Swappable Mesh/Glass Panels 3mm Top Tempered Glass 4mm Clear Side and Front Tempered GlassEXTREME VERSATILITY – VISION OR MESH O11 VISION COMPACT offers two different top panel options: a mesh panel designed for top AIO installation, and a tempered glass panel that allows for 270-degree side visibility, showcasing your components beautifully.(Mesh Panel Mode)Mesh panel installation accessories (Vision Mode) STURDY SUPPORT STRUCTURE The glass panels meet at the top left corner at a mounting key that provides alignment and magnetic support to the glass panels. The mounting key is hidden behind a triangular silk screen, with the white version being an elegant gradient white and grey. The mounting key used is rated for 35 kg of force to ensure a strong support.THREE-SIDED GLASS MODE: SHOWCASE YOUR STYLE The space above the motherboard can be used to install monitor accessories. There’s also an opening at the back to allow the monitor’s cable to be easily routed to the motherboard’s back IO. Additionally, the AIO tubing can be concealed in the second chamber, while the support for back-connect motherboards ensures a clean and beautiful layout in the main chamber.Support Back-connect Motherboard A mounting space for an IPS monitor included *The chassis does not include a IPS monitor. *It is recommended to use a monitor between 5 inches and 8.8 inches.The chasis supports up to a maximum of 14 fans (mesh mode push-pull set up) and up to 360mm radiator, ensuring excellent ventilation and cooling while maintaining a tidy appearance even with loads of component.Vision mode supports 8 fans Concealed Cables: Simple and Elegant Beside the rear pass-through grommet, an ATX EPS cover provides a clean BTF look. Long vertical grommets run the right side of the motherboard. The large top grommet can pass a CPU pump block, and can be removed/re-inserted for maximum clearance. Detaching the cable cover, AIO tubes slide into provided channels for a cleaner look.*Be careful with pump block pre-applied thermal paste. Pass-Through Channel for the AIO tubePass through grommet for the AIO pump POWERFUL COOLING COMPATIBILITYMESH MODE Supports up to 11x120mm fans, or 2x140mm and 8x120mm fansVISION MODE Supports up to 8x120mm fansRECOMMENDED AIRFLOW SET UPMESH MODE VISION MODE IMPROVE INTAKE WITH REVERSIBLE BRACKET The side radiator bracket can be removed for easy radiator and fan installation. Remove the thumbscrew on the right-side interior, and the bracket can be removed. The bracket can also be reversely installed for different setup configurations.PRE-INSTALLED GPU ANTI-SAG BRACKET The O11 Vision Compact features a built-in removable GPU anti-sag bracket that holds GPU ranging from 278mm to 408mm.The height is adjustable by turning the thumbscrew behind the motherboard tray to secure it.EASY ACCESS FOR DUST FILTERS The bottom of the O11 VISION COMPACT is equipped with a full-length dust filter that pull out from the left side. There are four magnets that attach the filter tight against the frame.Front I/O The power button features a white backlight to indicate the power status. The front I/O ports are located at the foot design, offering a variety of connections for convenience.HIGH STORAGE CAPACITY The removable cable management bar is secured by magnetic latches. Supports up to 2×2.5″ SSDs and can also accommodate a fan or ARGB hub.Cable management bar storage DRIVE CAGE 2 x 2.5″ SSD or 2 x 3.5″ HDD. Each drive cage is independently removable, freeing up space for cable management.EASY CABLE MANAGEMENT Like the O11 VISION, the O11 VISION COMPACT also comes with 2 dual-layer cable clips that slide out of their SSD-style mounting points. The clip can hold the bulk of PSU cables, while the Velcro strap on top is ideal for fan cable management. 6 additional Velcro straps, 2 above and 4 below, tidy up cables to the motherboard and storage.Bulky cables can be securely held in the cable holder. Thinner cables can be managed using Velcro straps. EXTENDED ROOM The PSU mounting bracket, carrying over the design from the O11 VISION, protrudes 15mm from the rear of the case, allowing extra space for cable management. Additionally, a cable tie point along the rear of the case helps keep the rear I/O cables tidy. Feature Details Case Type Tower Chassis Dimension (D)447.5mm x (W)287.5mm x (H)446.4mm Material Steel, 4.0mm tempered glass, 3.0mm tempered glass, Aluminium Motherboard Support Back-Connect ATX / E-ATX (Under 280mm) / ATX / Micro-ATX / Mini-ITX Expansion Slot 6 + 1 Storage Behind MB Tray: 2 × 2.5" SSD Hard drive cage: 2 × 3.5" HDD or 2.5" SSD GPU Length Clearance 408mm (Max.) CPU Cooler Height Clearance 164mm (Max.) PSU Support ATX (Under 220mm) Fan Support Top: 120mm x 3 or 140mm x 2 Side: 120mm x 3 Bottom: 120mm x 3 Rear: 120mm x 2 Radiator Support Top: 1 × 240mm or 1 × 280mm or 1 × 360mm Side: 1 × 240mm or 1 × 360mm Bottom: 1 × 240mm or 1 × 360mm I/O Ports Power Button x 1 USB 3.0 x 1 USB 3.1 x 2 Type-C x 1 Audio x 1 Dust Filter Bottom × 1

The Lian Li O11 Vision-M is a compact mATX PC case for current hardware and a visually appealing showcase build. Thanks to the dual-chamber design, the power supply, drives, and cables remain in the second chamber, while the front gives you an unobstructed view of the motherboard, graphics card, and your coolers. Three tempered glass panels create a panoramic look without a distracting support bar blocking the view.mATX dual-chamber PC case: Tidy build with a separate chamberTriple tempered glass: Front, side, and top with lock-and-key mechanismGPU and slot freedom: 5 PCIe slots and support for graphics cards up to 410 mm longAirflow & water cooling: Up to 12 fans and a 240/360 mm radiator in the topCustomizable design: Custom layout, cover for screen/LCD, STL file for 3D printing a dividerLian Li O11 Vision-M mATX case: Space for Mini-ITX, Micro-ATX, and high-end GPUsO11 Vision-M frontDespite its compact size, the O11 Vision-M offers room for Mini-ITX and Micro-ATX motherboards. With five PCIe slots, there is enough space for a large graphics card. Even long custom designs are no problem: GPUs up to 410 mm in length are supported. In the second chamber, you can fit an ATX power supply up to 182 mm long. There is also space for up to three drives there - ideal for keeping the power supply, storage, and cables out of sight.Triple tempered glass PC case: Panoramic showcase with lock-and-keyGlass on the front, side, and topThe front, side, and top are made of tempered glass. The panels are locked together using a lock-and-key mechanism and do not require an additional support in the corner. This gives the interior an open look and provides a clear view of your components.To prevent heat buildup despite the glass top, it features a large mesh cutout. This area is designed to reliably vent warm air upward - especially useful with fans or a radiator installed in the top.240/360 mm radiator in the top and well-thought-out tube routing for AiOsThere is space in the top for a 240 mm or 360 mm radiator. The radiator mount features integrated tube routing, allowing you to route your AiO tubes upward and over the motherboard. This keeps the GPU, RAM, and showcase area free of hoses running across them.Airflow in the Lian Li O11 Vision-M: Up to 12 fans for powerful coolingUp to 12 fans in total (distributed across the main and rear chamber)Top: 3x 120 mm (or 240/360 mm radiator)Bottom: 3x 120 mmSide: 2 fan mountsRear: 2 fan mountsFor cooling your hardware, the O11 Vision-M relies on numerous mounting points and a sensible fan layout. At the bottom, you can use 3x 120 mm as intake to supply fresh air directly to the graphics card. At the top, 3x 120 mm can be used as exhaust - or you can install a radiator for CPU water cooling. The side and rear positions allow you to fine-tune the airflow depending on your build.Rear-chamber cooling with pre-installed fanIn the rear chamber, there is a removable bracket that can simultaneously accommodate 1x 140 mm fan and 2x 120 mm fans. This is useful if you want additional exhaust or targeted airflow in the second chamber without changing the look of the main chamber.Customizable elements in the O11 Vision-M: Cover, screen options, and 3D-printed dividerCover with screen optionFor custom builds, the case offers a changeable layout and a removable cover that visually conceals a top-mounted AiO. The cover is prepared so that you can neatly integrate either a Lian Li 8.8-inch Universal Screen (sold separately) or another slim display. Alternatively, it can be replaced with a Lian Li 9.2-inch LCD kit.The screen/LCD options are configured via L-Connect 3, for example for system stats or custom animations, and can also be used as a second display if needed. In addition, Lian Li provides a free STL file for creating a 3D-printable divider. This allows you to visually close the gap between the top edge of the motherboard and the AiO, making your build look even more uniform.

Versatile and spacious midi tower, front and side panels made of tempered glass, with flexible radiator and vertical graphics card mounting, innovative reverse mode, radiators up to 420 mm, for up to 10 fans, 1x USB 3.1 Type C / 2x USB 3.0 Type A on the I/O panel. Two L-shaped light strips on top and bottom with befitting lighting effects. Front and side tempered glass panels with a removable pilar for a seamless view of components and RGB lighting. 2 heights adjustable motherboard rear I/O and mounting points. Supports up to 420mm radiator on top, and 360mm radiator on side and bottom. Supports 140mm fans x3 on top, side, and bottom. Cable management friendly with more space at the second chamber. Optional accesories for vertical GPU or upright GPU mounting.O11D EVO RGBThe all-new O11D EVO RGB, featuring dual ARGB light strips running through the top and bottom of the chassis，creating a stunning look. And the expanded internal space provides greater component compatibility, bringing an exceptional PC-building experience.REVERSIBLE CHASSIS DUAL ARGB STRIPS REMOVABLE FRONT PILLAR SUPPORTS TOP 420MM RADIATOR SUPPORTS 10 FANS ADJUSTABLE MOTHERBOARD INSTALLATION 8 DRIVES CAPACITY CABLE MANAGEMENT FRIENDLY TWO COLORS/TWO MODES Derived from the O11D EVO, the O11D EVO RGB can be displayed in two modes with just a few simple steps, allowing for a left or right view. It also comes in two color options: Black and White.White Coated Mesh Panel Clear Tempered Glass Aluminum with white powder coatingARGB STRIPS ON THE TOP AND BOTTOM The O11D EVO RGB features a 1.5mm thick L-shaped ARGB strip at both the top and bottom of the chassis that can switch between 14 different lighting effects, adjust brightness and color, and sync with the motherboard.M: Next/Previous Light Mode Button: Press 3 seconds to sync MB, press 3 seconds again to cancel. Go back and forth between lighting effects without needing to circle around the loop. C: Light Color Button: Switch between 11 colors, press 3 seconds to activate Pure Color Mode,press 3 seconds again to cancel.B: Light Brightness Button: Switch between 5 brightness levels-100%, 75%, 50%, 25%,0%. RGB Lighting Mode Pure Color Lighting Mode COMPLETELY UNOBSTRUCTED VIEW The O11D EVO RGB’s front pillar can now be easily removed, providing a seamless view for showcasing hardware without affecting the case’s structure.LARGER SIZE, HIGHER COMPATIBILITY Compared to the O11D EVO, the O11D EVO RGB is slightly larger, which provides higher component compatibility: it supports a 420mm radiator at the top (requires a separate bracket), 360mm radiator at the side/bottom, and 3x140mm fans at all three sides.Fan/Radiator Support 1. TOP Radiator：420/360mm Fan：3×120mm/3×140mm2. SIDE Radiator：360/280mm Fan：3×120mm/3×140mm3. REAR Fan：1×120mmMODULAR DESIGN FLEXIBLE CONFIGURATIONModularity has always been one of the design languages ​​of the O11D EVO series, and the O11D EVO RGB is no exception.At the bottom of the chassis, the I/O module with a wealth of ports, can be relocated to 3 different locations without the use of any tools.In addition, we have a separate I/O module O11DE-3XV2/O11DE-3WV2 as an optional accessory to meet the needs of the users that require more I/O ports.Struggle-Free Fan Brackets Equipped with a quick-release design, the fan brackets of all three sides can be easily removed or installed.The side bracket can be flipped vertically or horizontally, offering 4 different installation styles.TOWARD THE MAIN CHAMBER Supports up to 83.2 mm thick radiator/ fan combo in the main chamber.TOWARD THE SECOND CHAMBER Supports up to 113.7 mm thick radiator/ fan combo in the main chamber.TOWARD THE MOTHERBOARD (LEFT SIDE)TOWARD THE FRONT PANEL (RIGHT SIDE)The distance between the left-sided and right-sided installation positions reaches 20mm, so users who use E-ATX motherboards can choose the right-sided installation to avoid the fans from being blocked by the motherboard while gaining more cable management space. Additionally, the O11D EVO RGB features a newly designed vertical corner grommet, making cable management friendlier even when using a large motherboard.CUSTOMIZED CABLE MANAGEMENT O11D EVO RGB features an improved cable management design, featuring large VELCRO straps near the PSU chamber, dual-layer cable clips that can hold both the bulky and thinner cables, and 15mm of extended space from the rear of the PSU chamber for more cable management room.ELEVATE YOUR GPUO11D EVO RGB comes with the new anti-sag bracket GB-003 with easy height adjustment to support heavy GPUs.FRIENDLY STORAGE CAPACITY O11D EVO RGB offers multiple easily accessible storage mounting locations that support up to 8 × SSDs or 4 × HDDs + 2 × SSDs. Side Fan Bracket: 2 × 3.5″ HDD or 4 × 2.5″ SSDBehind MB Tray: 2 × 2.5″ SSDHard Drive Cage: 2 × 3.5″ HDD or 2.5″ SSD DIMENSIONS (D) 478mm × (W) 290mm × (H) 471mm MATERIAL 4.0mm tempered glass, Aluminum, Steel MOTHERBOARD SUPPORT E-ATX (Under 280mm) / ATX / M-ATX / MINI-ITX EXPANSION SLOT 7 STORAGE Side Fan Bracket: 2 × 3.5" HDD or 4 × 2.5" SSD Behind MB Tray: 2 × 2.5" SSD Hard Drive Cage: 2 × 3.5" HDD or 2.5" SSD RADIATOR SUPPORT Top: 240mm × 1 or 360mm × 1 or 420mm × 1 Side: 240mm × 1 or 280mm × 1 or 360mm × 1 Bottom: 240mm × 1 or 280mm × 1 or 360mm × 1 FAN SUPPORT Top: 120mm × 3 or 140mm × 3 Side: 120mm × 3 or 140mm × 3 Bottom: 120mm × 3 or 140mm × 3 Rear: 120mm × 1 GPU LENGTH CLEARANCE 455.7mm (Max) CPU COOLER HEIGHT CLEARANCE 167mm (MAX) PSU SUPPORT ATX (Under 220mm) I/O PORTS USB 3.0 × 2 USB 3.1 TYPE-C × 1 Audio × 1 Color Button × 1 Mode Button × 1 Brightness Button × 1 Reset Button × 1 Power Button × 1 DUST FILTER 1 × Bottom WARRANTY 1 year

USB-Header-Hub, 1-zu-3-Splitter, schafft zusätzliche USB-Header am Mainboard, kompatibel mit diversen Lian-Li-Controllern, dezentes und unauffälliges Design

MULTIPLE CERTIFICATIONSBuilt as a Gold-standard power supply, the RS Series surpasses expectations.During Cybenetics testing, its real-world efficiency exceeded the Gold range and earned a Platinum rating, proving its exceptional performance and power savings under demanding workloads.TWO INSTALLATION OPTIONS FOR GREATER FLEXIBILITYThe RS Series offers both standard and side installation options, giving users greater flexibility to suit different case layouts and achieve cleaner cable management.ROTATABLE AC INLETThe innovative rotatable AC inlet rotates 90°, providing unmatched flexibility to accommodate both standard and vertical installations.Flexible Cable Routing with Dual-Sided 20+4 PinThe dual-sided 20+4 Pin output design allows cable routing from both sides, making installation cleaner and easier in any configuration.PREMIUM INDUSTRIAL-GRADE CAPACITORS FOR UNMATCHED RELIABILITYEquipped with German EPCOS capacitors, the RS Series delivers long-lasting stability and trusted performance you can rely on.COMPACT SIZE, POWERFUL COOLINGWith a 150 86 150 mm form factor and a built-in 135 mm fan, the RS Series delivers efficient airflow and excellent dual-chamber case compatibility. Rated SSS by PPLP.info, it ensures ultra-low noise across all load levels for a consistently quiet experience.LIAN LI Exclusive Dual-Color 12V-26 CableSpecially designed for next-gen GPUs, LIAN LI's exclusive dual-color 12V-26 cable ensures safer and more reliable power delivery. The dual-color housing makes connections clearer at a glance, while the reinforced structure provides long-lasting durability and stability for every build.Braided-Textured Cable for Aesthetic AppealThe main 20+4-pin motherboard cable features a braided texture design with an included cable comb, offering durability and a refined look that enhances the overall build aesthetics.SHORTEN YOUR CABLES, PERFECT YOUR BUILDThese ultra-flexible flat cables, combined with magnetic clips that secure the folds, let you manage excess length, making them ideal for builds that require shorter CPU or PCIe cables. Perfect for back-connect motherboards or side-mounted PSU setups, they help keep your layout neat and organized.Protective Dust Cover for 18+10 Pin OutputEquipped with an insulated dust cover on the 18+10 pin output to protect against foreign objects and ensure safe, reliable operation.RS Hub for Enhanced ConnectivityThe integrated RS Hub provides extra connectivity directly from the PSU, reducing reliance on motherboard USB ports and simplifying cable management for a cleaner build. It comes with both USB Type-A and USB-to-USB cables, giving users flexible options to suit different routing preferences and installation setups.Two Included USB Cables for Flexible RoutingComes with both USB-Type A and USB-to-USB cables to suit different routing preferences and build configurations.All Essential Cables IncludedThe RS Series comes with a complete set of high-quality modular cables right out of the box. Every connection you need for a clean and reliable build is already included, ensuring a hassle-free installation experience.10-Year WarrantyThe RS Series PSU comes with an impressive 10-year warranty, ensuring long-term reliability and complete peace of mind. The RS Hub is also backed by a 2-year warranty, providing dependable support for every setup.80 Plus Gold certified with Cybenetics Platinum-level efficiency performance90° rotatable AC inlet for standard or vertical PSU installationGerman EPCOS industrial-grade capacitors for long-term reliabilityCompact 150 86 150 mm ATX design with 135 mm cooling fanUltra-quiet operation with PPLP.info SSS and Cybenetics A noise ratingsATX 3.1 ready with native 12V-26 high-current copper alloy terminalsDual-sided 20+4-pin ATX output for easier 24-pin cable routing

Single 120mm PWM fan in white, unique plug system for less cable clutter, with addressable RGB LEDs, up to 1,900 RPM with max 109.6 m³/h airflow, max 2.62 mmH2O static pressure, Note: Requires Lian Li UNI HUB (LULI-024/LULI-025)

Single 120mm PWM fan in black, unique plug-in system for less cable clutter, with addressable RGB LEDs, up to 2,000 RPM with a maximum airflow of 131.33 m³/h, maximum static pressure of 2.97 mmH2O.

4-pack bundle of 120mm PWM fans from Lian Li, unique plug system for less cable clutter, with addressable RGB LEDs, infinity mirror effect on the side and front, max. 2,100 RPM, max. 104.14 m³/h airflow, max. 2.66 mmH₂O static pressure, with controller Plug system for clean cable management 40 ARGB LEDs & infinity mirror design Fan speed & lighting controllable via software Up to 2,100 RPM at max. 29 dB(A) 104.14 m³/h airflow, 2.66 mmH₂O static pressure Decoupling through rubber buffers against vibrations Includes controller Lian Li UNI FAN SL-INF 120 Standard Blade – powerful PC fan with RGB lighting The UNI FAN SL-INF 120 Standard Blade is the perfect choice for builds with special demands on airflow and aesthetics. The standard design allows targeted airflow out of the case without sacrificing the visible RGB side – for a harmonious overall look inside the case. The revised version of the UNI FAN SL offers higher cooling performance while reducing cable clutter. Thanks to the modular plug system, multiple fans can be seamlessly connected – ensuring a clean look and making installation especially easy. Improved plug system for easy integration Lian Li has further optimised the proven daisy-chain system: the fans are connected via side contacts – saving separate cables for power and control. The new 7-pin connector combines all signals and can be routed in two directions. For more flexibility during installation, the connector is centrally placed on the frame – ideal also for radiator use. An adapter to split the signals for direct motherboard connection is included with the single version. Note: The system is not compatible with fans from the SL or AL series. High performance on radiators or inside the case With speeds from 200 to 2,100 RPM and airflow up to 104.14 m³/h, the SL-INF 120 Standard Blade delivers strong performance – with a static pressure of 2.66 mmH₂O, it is also well suited for dense radiator fins. The hydrodynamic bearing reduces friction and increases lifespan. Despite its power, the fan remains pleasantly quiet at a maximum of 29 dB(A). ARGB effects with depth through infinity mirror A total of 40 ARGB LEDs provide vibrant colours and even illumination. The infinity mirror effect enhances the lighting with optical depth – both at the fan hub and on the side frame. All LEDs can be individually addressed and customised via L-Connect 3 or motherboard software. For full control over lighting and speed, you can operate the fan directly via the motherboard or through the L-Connect controller. This gives you maximum flexibility for your setup – whether subtle or spectacular.

4-piece bundle of 120mm PWM fans from Lian Li, unique plug system for less cable clutter, with addressable RGB LEDs, infinity mirror effect on the side and front, max. 2,100 RPM, max. 108.05 m³/h airflow, max. 2.02 mmH₂O static pressure, with controller Plug system for clean cable management 40 ARGB LEDs & infinity mirror design Fan speed & lighting controllable via software Up to 2,100 RPM at max. 32 dB(A) 108.05 m³/h airflow, 2.02 mmH₂O static pressure Rubber buffers for decoupling and reduced vibrations Includes controller for easy operation Lian Li UNI FAN SL-INF 120 Reverse Blade – powerful PC fan with RGB lighting The UNI FAN SL-INF 120 Reverse Blade is the perfect choice for builds with special demands on airflow and aesthetics. The reverse design allows the airflow direction to be precisely inverted without sacrificing the visible RGB side, creating a harmonious overall look inside the case even in push or pull configurations. The updated version of the UNI FAN SL offers higher cooling performance while reducing cable clutter. Thanks to the modular plug system, multiple fans can be seamlessly connected, ensuring a clean appearance and making installation especially easy. Improved plug system for easy integration Lian Li has further optimized the proven daisy-chain system: the fans are connected via side contacts, eliminating separate cables for power and control. The new 7-pin connector combines all signals and can be routed in two directions. For greater flexibility during installation, the connector is centrally positioned on the frame, making it ideal for radiator use as well. An adapter for splitting the signals for direct motherboard connection is included with the single version. Note: The system is not compatible with fans from the SL or AL series. High performance on radiators or in the case With speeds from 200 to 2,100 RPM and an airflow of up to 108.05 m³/h, the SL-INF 120 Reverse Blade delivers strong performance. With a static pressure of 2.02 mmH₂O, it is also perfectly suited for dense radiator fins. The hydrodynamic sleeve bearing reduces friction and increases lifespan. Despite its performance, the fan remains pleasantly quiet at a maximum of 32 dB(A). ARGB effects with depth thanks to the infinity mirror A total of 40 ARGB LEDs provide vivid colors and even illumination. The infinity mirror effect enhances the lighting with optical depth, both at the fan hub and on the side frames. All LEDs can be individually addressed and customized via L-Connect 3 or motherboard software. For full control over lighting and speed, you can operate the fan directly via the motherboard or through the L-Connect controller (e.g. LULI-028 or LULI-029). This gives you maximum flexibility for your setup, whether subtle or spectacular.

140mm RGB fan in white, unique connector system for less cable clutter, with addressable RGB LEDs, max. 1,500 RPM, max. 119.7 m³/h airflow, max. 1.67 mmH2O static pressure, double pack with UNI HUB controller

120 mm PWM fan in white with configurable LCD display in a 3-packPractical interlocking system and improved daisy-chaining for less cable clutter32 digitally addressable RGB LEDsSpeed and lighting controllable via Lian Li L-Connect 3 softwareMax. 1,900 rpm speed at 27 dB(A)105.3 m³/h max. airflow and max. 2.9 mmH2O static pressureRubber pads to reduce disturbing vibrationsLian Li 12TL fan controller includedLian Li UNI FAN TL LCD Series: PWM fans to complement your setupThe Lian Li UNI FAN TL LCD Series are fans that fit perfectly into your setup. The PWM fan uses the same interlocking system that frees gaming PCs from unnecessary cable clutter. Lian Li also impresses in terms of cooling performance and sets new standards with breathtaking RGB lighting.Personalize your fans via LCDA 1.6-inch display with a resolution of 400 x 400 pixels is mounted on the hub of the Lian Li UNI FAN TL LCD Series and can be configured almost freely. It can display, for example, fan speed, temperature, or CPU and GPU load. Or you can upload your own images, GIFs, or short videos via L-Connect 3 software to give the fans your own personal touch. Lian Li points out that the more sensors are used, the more the CPU is taxed, and therefore no more than three sensors should be used.Interlocking system for seamless fan clustersThe installation of the Lian Li UNI FAN TL LCD Series follows the clever concept of Lian Li's other fans: the fans are equipped with contact points and connected to each other via a practical interlocking system. Multiple fans can be combined into a cluster and conveniently connected to the controller with just one cable. Thanks to this improved daisy-chain system, you save time and hassle and prevent unnecessary cable clutter. The pin contacts transmit both power and PWM and ARGB signals.Revised interlocking system of the Lian Li UNI FAN TL LCD SeriesThe interlocking system introduced with the UNI FAN SL and AL Series has been improved once again for the Lian Li UNI FAN TL LCD Series. For one thing, the interlocking system was designed so that the connector can be removed. This prevents possible collisions with connections on the radiator and at the same time ensures a tidy look.In addition, the connector for the cable module has been removed, and the cable can now be connected directly to the fan instead. The connector is recessed flat into the frame, giving you more space for the use of radiators.The power and ARGB signal cables, which are usually separate, have been combined into one 7-pin cable. You can connect these cables directly to the controller. Up to four fans in one cluster can be powered with one cable. With the corresponding extension cable, you can connect up to 6 fans with LCD to the two ports of the controller and control them via L-Connect 3 software.Note: The connectors of the Lian Li UNI FAN TL LCD Series are not compatible with the SL and AL Series!Lian Li UNI FAN TL LCD Series: Impressive performance valuesAt full load, the fans operate relatively quietly at a maximum of 27 dB(A). The small gap between the fan blades and the frame, and the resulting reduced friction resistance, allows higher speeds with the same power consumption and thus significantly increased airflow and excellent performance. Cool temperatures are also promoted by the increased thickness of 28 millimeters.The start/stop mode for your Lian Li UNI FAN TL Series can also be activated via L-Connect 3 software. If your components are below a temperature you define (maximum 50 degrees), the fans remain off. In addition, L-Connect 3 offers the option to create an optimized fan curve for speed and temperature.Optimized concept for lighting and lookLian Li has significantly improved the fans. For example, the side LED strips of connected fans have a significantly reduced gap between individual fans of 0.7 millimeters, compared to 3 and 5.6 millimeters in the previous generation. This creates seamless transitions between the illuminated areas and enhances effects across fan clusters. Lian Li has revised the design of the rubber pads and added additional cutouts. As a result, the unusual RGB lighting, which also illuminates the infinity mirror on two sides, stands out even better.

120mm PWM fan from Lian Li, unique plug-in system, improved daisy-chaining, with addressable RGB LEDs, max. 2600 RPM, max. 153.1 m³/h air flow, and max. 3.97 mmH2O static pressure, Note: Requires Lian Li 12TL fan controller

120mm PWM fan from Lian Li with LCD, unique plug system, improved daisy-chaining, with addressable RGB LEDs, max. 1,900 rpm, max. 105.3 m³/h airflow, and max. 2.9 mmH2O static pressure, Note: Requires Lian Li 12TL fan controller.

120 mm PWM fan from Lian Li, unique connector system, improved daisy-chaining, with addressable RGB LEDs, max. 2,600 RPM, max. 153.1 m³/h airflow and max. 3.97 mmH2O static pressure, Note: Requires Lian Li 12TL Fan Controller

120 mm PWM intake fan from Lian Li, unique plug-in system, improved daisy chaining, with addressable RGB LEDs, max. 2,300 RPM, max. 141.7 m³/h airflow, and max. 2.66 mmH2O static pressure, Note: Requires Lian Li 12TL fan controller.

The Lian Li UNI FAN TL LED Wireless fans impress with their elegant look and enhance your setup visually. The plug-in system, in particular, ensures a tidy build. Your hardware is kept at cool temperatures—even under heavy load. 140 mm PWM fan with reverse blades Less cable clutter thanks to a practical plug-in system and daisy-chain capability Full control over the fans with the L-Connect 3 software Infinity mirror and LED strips on the side provide an elegant look High airflow in m³/h and static pressure with max. mmH2O Lian Li UNI FAN TL LED Wireless: Stylishly Designed Fans The Lian Li UNI FAN TL LED Wireless is a 140 mm fan with reverse-oriented blades in black. Thanks to its high cooling performance, this PC fan is also suitable for high-end systems. Reverse blade fans are specially designed to reverse the airflow—ideal for use as intake fans. Unlike standard fans, they display their front side, the visually appealing side. This keeps your build looking clean—with no visible backs or unsightly stickers. 140 mm fan with impressive cooling performance A high airflow of up to 172.6 m³/h and a static pressure of up to 2.27 mmH2O, combined with up to 1,800 RPM, provide effective cooling for your gaming hardware. The increased build height of 28 mm further promotes cool temperatures. At no more than 29 dB(A), the fan is barely audible even at full load despite its high cooling performance. Smart plug-in system and daisy-chaining Thanks to the practical plug-in system, individual fans can easily be connected together. You'll need fewer cables for installation, making your build look significantly cleaner. The Lian Li wireless controller, which can be connected to the motherboard and linked with the fans, reduces cable clutter even further. Please note that the wireless controller must be purchased separately. In addition, you can combine the LCD variant with the fans of the LED variant, as long as you do not connect more than four fans to one controller. The plug-in system is not only practical, but also enables seamless transitions between fans. This particularly benefits the LED strips on the edges—once connected, stylish RGB effects can be set. The infinity mirror also gives the fan an attractive look.

The Lian Li Vector V100 combines stylish yet simple design with high compatibility and a special cutout for more individuality. With this desktop case, you get the perfect chassis for your next gaming PC. White midi-tower with tempered glass on the side and front Supports motherboards up to ATX form factor and with back-connect design Optimal cooling with up to nine fans and radiator support up to 360 mm Space for graphics cards up to 415 mm and CPU coolers up to 180 mm in height Four 120 mm fans with RGB lighting included Cutout with removable cover for collectibles The Lian Li Vector V100: midi-tower with a stylish design and plenty of space for hardware Express your personality with the Vector V100. Thanks to tempered glass panels on the side and front, you have an unobstructed view into your tower’s interior, while the LED strips are just the beginning of impressive RGB lighting. Make your build something special Directly behind the front of the V100 case is a cutout. Whether for figures or other collectibles—you can display your interests. If you don't need the cutout, simply cover it with the removable panel. Extensive cooling options Four 120 mm ARGB fans are already pre-installed—three reverse fans on the side and one with standard orientation at the rear. Thanks to their reversed fan blades, the sideways-mounted fans provide efficient airflow—and look just like regular fans. Additional mounting points for more fans are located on the top and bottom. If you prefer water cooling, you can also install a radiator up to 360 mm on the top panel. The dust filter at the bottom is easy to remove, so you can clean it whenever needed. Easy installation of your gaming hardware The Vector V100 offers plenty of space for your components—even high-end hardware. Thanks to support for motherboards with back-connect design and tidy cable management, your build will really stand out.

Mounting-Bracket von Lian Li für NVIDIA 40-Series GPUs, zur Verwendung im Lian Li O11, ermöglicht vertikalen Einbau der Grafikkarte (hochkant), für Grafikkarten bis 348 mm Länge / 3 Slots Höhe, weiß

Distributes content from a single HDMI source across 16 HDMI displaysSupports resolutions up to 4K@60Hz, with additional support for HDRHDCP 2.2 for enhanced compatibility with 4K contentSmart EDID Management control to ensure the optimum video performance2 year warranty HDMI splitters are high quality solutions for distributing identical content simultaneously across several HDMI displays. The Lindy 16 Port HDMI Splitter is a professional solution for distributing high quality HDMI content simulateneously across 16 seperate displays, when connected to a single HDMI source such as media players, PCs or set top boxes. With support for full 4K@60Hz resolutions and HDR, content can be viewed in superior quality with a wider colour gamut and greater contrast. The splitter is perfect for creating eye-catching digital signage in retail, hospitality, conference rooms, transport hubs or impressive residential installations. HDCP 2.2 support also ensures seamless playback of 4K and Full HD content including video games, Blu-rays and on-demand video. The splitter also includes a smart EDID dip switch for ensuring the optimum resolutions possible are shown on the connected displays.

Professional choice DVI-D Dual Link cable for commercial and high performance AV and IT installationsSupports DVI resolutions up to 2560x1600 @60Hz and HDTV resolutions up to 1080pRobust PVC housing, 24K gold plated connectors and contactsTriple shielded cable, corrosion resistant tinned copper 28AWG conductors10 year warranty From the Lines cable connectivity concept developed by Lindy, Anthra Line DVI-D Dual Link cables are the professional choice for high resolution connections in commercial AV and IT applications. Anthra Line DVI-D Dual Link are premium cables that feature triple shielded construction with 28AWG tinned copper conductors for performance and corrosion resistance. High quality 24K gold plated contacts and connectors maintain optimal signal integrity and maximum reliability.The tough PVC housing incorporates an integrated finger grip for easy installation. Large thumb screws allow the connector to be tightened into place without the need for a screwdriver and a flexible strain relief prolongs cable life.Anthra Line DVI-D Dual Link cables support resolutions up to 2560x1600@60Hz including HDTV resolutions up to 1080p.Anthra Line DVI-D Dual Link cables are available in lengths of 0.5m to 20m.

For use in conjunction with the brackets and arms of our Silver Modular Desktop Mounting System range (sold separately)Create a customized installationSturdy, adjustable C-Clamp for mounting the pole into a desk grommetRobust, lightweight metal construction with a durable, powder coated silver grey finishAbove picture shown for illustration purposes only. Brackets and arms are not included. See below for the full range & typical installation examples.... This 450mm Pole fits neatly into a grommet on any office, school or home desk. It forms part of our unique, Silver Modular Desktop Mounting System. With this system you can easily create customized solutions for mounting your laptops and displays in a variety of different configurations. Installation Examples The LINDY Silver Modular Desktop Mounting System provides a really versatile method for creating your own custom installations. With these products you can raise your notebooks, monitors or iPad to create desk space or provide a more comfortable viewing position. Or, by using several arms, you can mount multiple displays on a single pole. The examples below show setups using our Desk Clamp Poles, however each install can also be achieved by using our Desk Grommet Clamp Poles. To display a LCD screen use this pole in conjunction with a LCD Bracket or a Adjustable LCD Arm depending on how flexible you want your display. A single display mounted on an Adjustable LCD Arm Four LCD displays mounted on two Dual Adjustable LCD Arms using the 700mm Desk Clamp Pole Two screens mounted vertically on a 700mm Desk Clamp Pole using two LCD Brackets Adjustable Notebook Arm combined with an Adjustable LCD Arm on a 700mm Desk Clamp Pole An iPad in use with an iPad Bracket, LCD Bracket and 450mm Desk Clamp Pole

Kompromissideta, ülim jõudlusega sertifitseeritud ülikiire HDMI 2.1 kaabel nõudlikesse keskkondadesse ja missioonikriitilistesse süsteemidesse Toetab eraldusvõime kuni 10240x4320 4: 2: 0 12bit Täismetallist 24K kullatud korpus, 24K kullatud klemmid ja kontaktid Madala sumbumisega kolmekordne varjestatud kaabel, korrosioonikindel, suure jõudlusega OFC 26AWG juhid HDMI 2.1 ülikiire sertifitseeritud: 3D, 4K, 48Gbps, HEC, ARC, eARC, CEC, Dolby® True HD, Dolby® Atmos, DTS-HD Master Audio, DTS: X; HDMI ATC sertifitseeritud; 25-aastane garantii Lindy välja töötatud Lines-kaabli ühenduvuse kontseptsioonist alates on Gold Line Ultra High Speed ​​HDMI-kaablid kompromissitu ja suure jõudlusega ühenduslahendus kõige nõudlikumates professionaalsetes keskkondades kasutamiseks. Gold Line ülikiire HDMI-kaablitel on kolmekordse varjestusega konstruktsioon 26AWG OFC juhtmetega, et tagada parim jõudlus ja korrosioonikindlus. Kvaliteetsed 24K kullatud kontaktid ja pistikud säilitavad optimaalse signaali terviklikkuse ja maksimaalse töökindluse. Toetatakse eraldusvõime kuni 10K 10240x4320 @ 120Hz 4: 2: 0 12bit. Gold Line HDMI-kaablid on võimelised edastama ka suure bitikiirusega 32-kanalilist heli ja Dolby® Atmos. Need kõrgekvaliteedilised kaablid kasutavad unikaalset madala sumbumisvõimega disaini, mis tagab järjepideva ja usaldusväärse ülekande ka väga pikkade vahemaade korral.

The Lindy Premium cable is designed for reliable and efficient networking solutions. Featuring a male RJ-45 connector, this cable ensures a stable connection for data transmission, making it a suitable choice for home or office setups. Its robust construction allows for seamless integration with various devices, enhancing your network's performance.

Compliant with DisplayPort 1.2 specification for both 1.62 and 2.7GbpsSupports up to 2560 x 1600 and 2160p display resolutionsOverall length: 150mmColor: White2 year warranty.

For use with a pole from the Lindy Black Modular Desktop Mounting System range (sold separately)Robust, lightweight metal and aluminium construction with a durable, powder coated finishPole not includedColour: Black2 year warranty Please note: A pole is not included and must be purchased separately. Four versions are available, a 400mm Desk Clamp Pole or Desk Clamp Pole with Grommet and a 700mm Desk Clamp Pole or a Desk Clamp Pole with Grommet. This LCD Bracket is part of a unique Black Modular Desktop Mounting System to create customized solutions for mounting your laptops and displays in a variety of different configurations. Installation Examples The Lindy Black Modular Desktop Mounting System provides a really versatile method for creating your own custom installations. With these products you can raise your notebooks or monitors to create desk space or provide a more comfortable viewing position. Or, by using several arms, you can mount multiple displays on a single larger pole. You can add an additional Notebook Arm to display a notebook.

Power DC equipped devices from a 5V USB port1.5m cable with USB 2.0 Type A connectorDC connector has 1.35mm Inner diameter / 3.5mm Outer diameter10 Year WarrantyBlackThe LINDY USB to DC Adapter cable allows you to power 5V DC devices from a single USB port. It is perfect for mobile applications, eliminating the need to store additional wall adapters and the need to carrying bulky PSUs when travelling.Furthermore, when combined with the LINDY 4 Port USB UK Mains Charger, LINDY USB Car Charger 1A or Mini USB Car Charger 1.2A you gain a very useful home and travelling power solution.

LOGITECH Signature Comfort Plus MK880 Wireless Combo - OFF-WHITE - US INT'L - BT - INTNL - 973

Discover the Logitech G440, a mouse pad designed to elevate your gaming experience. Manufactured by Logitech, this accessory is part of the Logitech G product line, known for its commitment to quality and performance. The G440 stands out with its durable construction, combining polystyrene and rubber materials to offer a mouse pad that withstands the rigors of intense gaming sessions. Its fine-textured surface is meticulously crafted to provide the perfect balance between friction and glide, enhancing mouse control for precise movements. Whether you're a competitive gamer or simply seeking a reliable mouse pad for everyday use, the Logitech G440 delivers on both durability and performance.

G535 is designed for low-latency performance, freedom from wires, and lasting comfort for all your gaming sessions. Enjoy advanced LIGHTSPEED wireless, many hours of battery life, and 40 mm drivers for crystal-clear and booming sound. Weighing very light grams with an adjustable headband and soft memory foam earpads to ensure all-day comfort.

LOGITECH G915 X LIGHTSPEED Wireless Gaming Keyboard - WHITE - US INT'L - 2.4GHZ/BT - EMEA28i-935 - TACTILE

LOGITECH G915 X LIGHTSPEED TKL Wireless Gaming Keyboard - BLACK - US INT'L - 2.4GHZ/BT - EMEA28i-935 - TACTILE

Wireless mouse M185 910-002236 blueTHE PERFECT SOLUTION FOR MOBILE COMPUTERS.The mouse works with Windows, Mac, Chrome OS and Linux. You can be sure that the mouse will always work as expected, regardless of what computer you use today and what you will use in the future.CAN NOT BE RIPPED OFFNow you can enjoy the high quality and reliability that Logitech is known for. In addition, you will receive a 3-year limited hardware warranty.OUR MINOR RECEIVER IN HISTORYWorks with both Mac and Chrome OS computers as well as with Windows computers. It's so small that just plug it into the USB port and forget about it. It is not striking. No more worries about lost receivers.RELIABILITY OF LOGITECHYou gain high quality and reliability that have made Logitech the global leader in the field of mice, and a three-year limited hardware warranty.ANNUAL BATTERY LIFEProblems with batteries will disappear for the whole year. The switch and intelligent sleep mode help to save energy.COMFORTABLE, PROFILED SHAPEThe profiled shape adapts well to both hands, and the mouse is much more convenient than the touch panel.CONNECTION WITH 2.4GHZBenefit from reliability comparable to wired solutions, but without cables. Data transmission is fast; it runs virtually without delays or distortions.

Stay focused on your work and cut out distractions. Meet Logitech MK295 Silent Wireless Combo featuring SilentTouch-an exclusive Logitech technology that eliminates over 90% of keyboard and mouse noise. It's the same clicking and typing feel of the world's bestselling combo without disruptive clicking and typing sounds.

Own your space with the MK470 Slim Combo - an ultra-thin and design-forward keyboard and mouse combo perfect for getting things done efficiently and quietly, even in the tightest desk spaces.

Focused on innovation and quality, Logitech designs personal peripherals to help people enjoy a better experience with the digital world. The company started in 1981 with mice, which were new at the time and provided a more intuitive way of interacting with a personal computer. Logitech became the worldwide leader in computer mice and has reinvented the mouse in dozens of ways to match the evolving needs of PC and laptop users. Since those early days, the company has expanded its expertise in product design beyond the computer mouse, with a broad portfolio of interface devices that are the “last inch” between you and your computer, console game, digital music or home-entertainment system.

LOGITECH Signature Comfort Plus MK880 Wireless Combo - GRAPHITE - US INT'L - BT - INTNL - 973

LOGITECH Slim Solar+ for Business - GRAPHITE - PAN - 2.4GHZ/BT - NORDIC-613 - UNIV