Arvutitark OÜ

High-Fidelity Gaming Audio with Active Noise CancellationMulti-System Connect to easily switch between PS5 and PC or SwitchActive Noise Cancellation with Transparency ModeNeodymium Magnetic Drivers are Hi-Res capable for premium audio.2 batteries for no downtime - charge in the base and swap to keep going.Simultaneous 2.4GHz & Bluetooth to mix game & mobile audioOnboard Audio Profiles — instantly apply fine-tuned audioMulti-System ConnectImmerse yourself in a deep and detailed soundscape on any platform of your choice — PC, PlayStation, Switch, and more. Connect two systems at once for easy switching with one powerful setup.Simultaneous BluetoothChat on Discord, take calls, or enjoy your playlists while you play, with the ability to hear mobile and game audio at the same time.360° Spatial AudioExperience sound from every direction for full immersion and 360° awareness. Compatible with Tempest 3D Audio.Neodymium Magnetic DriversHear everything with pro-grade Hi-Res capable drivers: crystal-clear highs, precise mids, and deep bass.Active Noise CancellationANC automatically detects and removes distracting noises around you, so you can fully focus on your game; use Transparency Mode to hear your surroundings.2 Batteries for No DowntimeLow battery? With two hot-swappable batteries, it’s no big deal. Just swap and keep going.Up to 22 hours per battery. Onboard Audio Profiles: You could spend 30 minutes fine-tuning sound settings. Or you could let SteelSeries audio engineers, game devs & pro players do it for you. Featuring profiles for Fortnite, Minecraft, Apex Legends, and many more.EQ Settings: Easily configure the sound profile yourself with a 10-band equalizer, from bass to treble, without leaving your game. Perfect for console users.ChatMix: The Wireless Base Station allows you to strike the perfect balance between game sound and teammate chat — turn down that epic shouter or boost the victory whisperer. You can even adjust it remotely from the headset control wheel.SpecificationsCompatibilityPC: ChatMix (via Sonar Software) *Windows 10 and abovePS4 | PS5: USBHandheld | Switch: USB or via Bluetooth. Also supports: ROG Ally, SteamdeckMobile: BluetoothMac: USBSpeaker DriversNeodymium Drivers: 40 mmHeadphone Frequency Response (Wired): 10-40,000 HzHeadphone Sensitivity: 93 dBSPLHeadphone Impedance: 38 OhmHeadphone Total Harmonic Distortion: <1%Headphone Frequency Response (Wireless): 10-22,000 HzHigh-Res Audio Capable: Yes (Headphone Speakers)Microphone Microphone Polar Pattern: Bidirectional Noise-CancelingMicrophone Type: ClearCast Gen 2 - Fully Retractable BoomMicrophone Frequency Response: 100-6500 HzMicrophone Sensitivity: -38 dBV/PaActive Noise Cancellation: 4-mic hybrid design with Transparency ModeMicrophone Impedance: 2200 OhmDual WirelessWireless Range: 40 ft / 12m (2.4 GHz)Bluetooth Wireless: v 5.0Gaming Wireless: Low Latency 2.4 GHzDual Connection: Simultaneous 2.4 Ghz & BTInfinity Power SystemNumber of Batteries: 2At Home: Non-stop battery with hot-swap (within 8 seconds)On-the-go: 44 Hours - 2.4GHz Quantum 2.0 Gaming Wireless / 36 Hours - 2.4GHz Quantum 2.0 Gaming Wireless + BT (18-22 hours per battery)Fast Charge: 15 mins for 3 hours playBox ContentProduct Information GuideArctis Nova Pro Wireless WhiteWireless Base Station: 2x USB-C System Connections, 1x Line-in, 1x Line-out 3.5mm to 3.5mm Audio Cable - 5 pole to 4 pole (4 ft / 1.2m)1x USB-C to USB-A Cable (5 ft / 1.5m)Microphone Pop Filter2x Lithium Ion Batteries2x Removable Magnetic Ear PlatesSoftware RequirementsGG + Sonar Audio Software Suite: Windows 10 and above (required for ChatMix)GG + Engine: Windows 8.1 and above, Mac OS 10.13 and above

4K FAST - 4K wireless polling delivers 4x the speed of the previous generation (0.25ms vs 1ms), with ultra-fast clicks for more headshots. PERSONAL AIMING TOOLS - Sensitivity Finder improves your aim with easy per-game conversion, plus 3D Aim Trainer Software to sharpen your skills. TRUEMOVE 26K SENSOR – 26,000 DPI precision with 400 IPS speed and 40G acceleration for ultra-fast flicks, smooth tracking, and zero skips. 80M CLICK DURABILITY — Built with durable mechanical switches rated for 80 million clicks, delivering crisp, consistent actuation that maintains its feel and performance over time. ULTRA-LIGHT, WATERTIGHT - AQUABARRIER™ is rated IP54 to protect against water splashes, dust, and dirt getting inside the mouse, while weighing only 68g. QUANTUM 4K WIRELESS - Seamlessly switch between ultra-fast 2.4GHz gaming wireless and Bluetooth 5.0, giving you low-latency performance for competitive play and easy connectivity across multiple devices.Aerox 3 Wireless Gen 2 Not Just Fast. 4K Fast. Near-instant 0.25ms response for smoother hand-to-screen tracking.Smoother Tracking Get smoother, more precise aim with 4x the signal updates of a standard 1K mouse.<2ms Click Latency With lower click latency, every click registers faster for a snappier, more responsive feel... and more headshots.Up to 200 Hours of Power Game, grind, and scroll for up to 200 hours on Bluetooth or up to 120 hours on 2.4GHz wireless.TrueMove 26K Sensor With true one-to-one tracking, your hand = your aim.Liftoff Distance Reposition without cursor drift with a liftoff distance as low as 1mm.400 IPS + 40G From micro-adjustments to fast flicks, the sensor tracks with zero skips.80 Million Click Mechanical Switches Built for years of crisp clicks, with no mushy feel or double-click failures.Ultra Light. Water Tight. AquaBarrier™ keeps out dust, sweat, and spills - unlike other honeycomb shells.We Gamed Under Water It’s not designed for this, but we tried it anyway! Scroll Jump Protection Ignore the first scroll bump to prevent accidental jumps during intense gameplay.100% PTFE Mouse Feet Smoother glide, faster flicks, and additive-free feet for zero drag.6 Programmable Buttons Assign weapon swaps, utility binds, abilities & more.Specifications1) SensorSensor Type: OpticalSensor: SteelSeries TrueMove Optical SensorDPI: 100–26,000 in 100 DPI incrementsIPS: 400 IPS (inches per second on SteelSeries QcK surfaces)Polling Rate (Max): 4000Hz / 0.25 msAcceleration: 40G2) DesignBack Cover Material: Transparent Black (Shadow) | Transparent White (Ghost) | Transparent Magenta (Magenta Haze)Shape: Ergonomic, right-handedGrip Style: Claw / FingertipNumber of Buttons: 6Switch Type: SteelSeries mechanical switches, rated for 80 million clicksIllumination: 3 RGB ZonesCore Construction: ABS PlasticLength: 120.55mm / 4.75 inchesWidth: 57.91mm / 2.28 inches (front), 67.03mm / 2.64 inches (back)Height: 21.53mm / 0.85 inches (front), 37.98mm / 1.50 inches (back)Weight: 68g / 0.15lbs3) Wireless ConnectionsGaming Wireless: 2.4GHzBluetooth: V5.04) Battery LifeBattery Life (RGB Off): Up to 120 hours 2.4GHz (1K Polling) / 35 hours 2.4GHz (4K polling) / 200 hours Bluetooth5) Box ContentsProduct Information GuideAerox 3 Wireless Gen 2 Gaming MouseUSB-C 2.4GHz Wireless DongleUSB Type-C to USB Type-A Super Mesh Data/Charging Cable (5.9ft/1.8m)Extension Adapter (USB-C to USB-C)6) CompatibilityOS / Platforms: Windows, Xbox Series X|S, PlayStation 5, Android, iOS (*Not all features may be supported on console/mobile)SteelSeries GG Software Requirements: Windows 10 and above

4K FAST - 4K wireless polling gives you 4x the speed of the previous generation (0.25ms vs 1ms) with ultra-fast clicks for more headshots. PERSONAL AIMING TOOLS - Sensitivity Finder for improved aim with easy per game conversion, plus 3D Aim Trainer Software to hone your skills. TRUEMOVE 26K SENSOR – 26,000 DPI precision with 400 IPS speed and 40G acceleration for ultra-fast flicks, smooth tracking, and zero skips. 80M CLICK DURABILITY — Built with durable mechanical switches rated for 80 million clicks, delivering crisp, consistent actuation that holds its feel and performance over time. ULTRA-LIGHT, WATERTIGHT - AQUABARRIER™ rated IP54 to protect from water splashes, dust, and dirt getting inside the mouse, and only 68g in weight. QUANTUM 4K WIRELESS - Seamlessly switch between ultra-fast 2.4GHz gaming wireless and Bluetooth 5.0, giving you low-latency performance for competitive play and easy connectivity across multiple devices.Aerox 3 Wireless Gen 2 Not Just Fast. 4K Fast. Near-instant 0.25ms response for smoother hand-to-screen tracking.Smoother Tracking Get smoother, more precise aim with 4x the signal updates of a standard 1K mouse.<2ms Click Latency With lower click latency, every click registers faster for a snappier, more responsive feel... and more headshots.Up to 200 Hours of Power Game, grind and scroll for up to 200 hours on Bluetooth or up to 120 hours on 2.4GHz wireless.TrueMove 26K Sensor With true one-to-one tracking, your hand = your aim.Liftoff Distance Reposition without cursor drift with a liftoff distance as low as 1mm.400 IPS + 40G From micro-adjustments to fast flicks, the sensor tracks with zero skips.80 Million Click Mechanical Switches Built for years of crisp clicks, with no mushy feel or double-click failures.Ultra Light. Water Tight. AquaBarrier™ seals out dust, sweat, and spills - unlike other honeycomb shells.We Gamed Under Water It’s not meant for this, but we tried it anyway! Scroll Jump Protection Ignore the first scroll bump to prevent accidental jumps during intense gameplay.100% PTFE Mouse Feet Smoother glide, faster flicks, and additive-free feet so there’s zero drag.6 Programmable Buttons Assign weapon swaps, utility binds, abilities & more.Specifications1) SensorSensor Type: OpticalSensor: SteelSeries TrueMove Optical SensorDPI: 100–26,000 in 100 DPI incrementsIPS: 400 IPS (inches per second on SteelSeries QcK surfaces)Polling Rate (Max): 4000Hz / 0.25 msAcceleration: 40G2) DesignBack Cover Material: Transparent Black (Shadow) | Transparent White (Ghost) | Transparent Magenta (Magenta Haze)Shape: Ergonomic, right-handedGrip Style: Claw / FingertipNumber of Buttons: 6Switch Type: SteelSeries mechanical switches, rated for 80 million clicksIllumination: 3 RGB ZonesCore Construction: ABS PlasticLength: 120.55mm / 4.75 inchesWidth: 57.91mm / 2.28 inches (front), 67.03mm / 2.64 inches (back)Height: 21.53mm / 0.85 inches (front), 37.98mm / 1.50 inches (back)Weight: 68g / 0.15lbs3) Wireless ConnectionsGaming Wireless: 2.4GHzBluetooth: V5.04) Battery LifeBattery Life (RGB Off): Up to 120 hours 2.4GHz (1K Polling) / 35 hours 2.4GHz (4K polling) / 200 hours Bluetooth5) Box ContentsProduct Information GuideAerox 3 Wireless Gen 2 Gaming MouseUSB-C 2.4GHz Wireless DongleUSB Type-C to USB Type-A Super Mesh Data/Charging Cable (5.9ft/1.8m)Extension Adapter (USB-C to USB-C)6) CompatibilityOS / Platforms: Windows, Xbox Series X|S, PlayStation 5, Android, iOS (*Not all features may be supported on console/mobile)SteelSeries GG Software Requirements: Windows 10 and above

4K FAST - 4K wireless polling delivers 4x the speed of the previous generation (0.25ms vs 1ms), with ultra-fast clicks for more headshots. PERSONAL AIMING TOOLS - Sensitivity Finder improves your aim with easy per-game conversion, plus 3D Aim Trainer Software to sharpen your skills. TRUEMOVE 26K SENSOR – 26,000 DPI precision with 400 IPS speed and 40G acceleration for ultra-fast flicks, smooth tracking, and zero skips. 80M CLICK DURABILITY — Built with durable mechanical switches rated for 80 million clicks, delivering crisp, consistent actuation that maintains its feel and performance over time. ULTRA-LIGHT, WATERTIGHT - AQUABARRIER™ is rated IP54 to protect against water splashes, dust, and dirt getting inside the mouse, while weighing only 68g. QUANTUM 4K WIRELESS - Seamlessly switch between ultra-fast 2.4GHz gaming wireless and Bluetooth 5.0, giving you low-latency performance for competitive play and easy connectivity across multiple devices.Aerox 3 Wireless Gen 2 Not Just Fast. 4K Fast. Near-instant 0.25ms response for smoother hand-to-screen tracking.Smoother Tracking Get smoother, more precise aim with 4x the signal updates of a standard 1K mouse.<2ms Click Latency With lower click latency, every click registers faster for a snappier, more responsive feel... and more headshots.Up to 200 Hours of Power Game, grind, and scroll for up to 200 hours on Bluetooth or up to 120 hours on 2.4GHz wireless.TrueMove 26K Sensor With true one-to-one tracking, your hand = your aim.Liftoff Distance Reposition without cursor drift with a liftoff distance as low as 1mm.400 IPS + 40G From micro-adjustments to fast flicks, the sensor tracks with zero skips.80 Million Click Mechanical Switches Built for years of crisp clicks, with no mushy feel or double-click failures.Ultra Light. Water Tight. AquaBarrier™ seals out dust, sweat, and spills - unlike other honeycomb shells.We Gamed Under Water It’s not designed for this, but we tried it anyway! Scroll Jump Protection Ignore the first scroll bump to prevent accidental jumps during intense gameplay.100% PTFE Mouse Feet Smoother glide, faster flicks, and additive-free feet for zero drag.6 Programmable Buttons Assign weapon swaps, utility binds, abilities & more.Specifications1) SensorSensor Type: OpticalSensor: SteelSeries TrueMove Optical SensorDPI: 100–26,000 in 100 DPI incrementsIPS: 400 IPS (inches per second on SteelSeries QcK surfaces)Polling Rate (Max): 4000Hz / 0.25 msAcceleration: 40G2) DesignBack Cover Material: Transparent Black (Shadow) | Transparent White (Ghost) | Transparent Magenta (Magenta Haze)Shape: Ergonomic, right-handedGrip Style: Claw / FingertipNumber of Buttons: 6Switch Type: SteelSeries mechanical switches, rated for 80 million clicksIllumination: 3 RGB ZonesCore Construction: ABS PlasticLength: 120.55mm / 4.75 inchesWidth: 57.91mm / 2.28 inches (front), 67.03mm / 2.64 inches (back)Height: 21.53mm / 0.85 inches (front), 37.98mm / 1.50 inches (back)Weight: 68g / 0.15lbs3) Wireless ConnectionsGaming Wireless: 2.4GHzBluetooth: V5.04) Battery LifeBattery Life (RGB Off): Up to 120 hours 2.4GHz (1K Polling) / 35 hours 2.4GHz (4K polling) / 200 hours Bluetooth5) Box ContentsProduct Information GuideAerox 3 Wireless Gen 2 Gaming MouseUSB-C 2.4GHz Wireless DongleUSB Type-C to USB Type-A Super Mesh Data/Charging Cable (5.9ft/1.8m)Extension Adapter (USB-C to USB-C)6) CompatibilityOS / Platforms: Windows, Xbox Series X|S, PlayStation 5, Android, iOS (*Not all features may be supported on console/mobile)SteelSeries GG Software Requirements: Windows 10 and above

Legendary micro-woven cloth optimized for low and high DPI tracking movements Non-slip rubber base for ultimate stability Trusted by the pros for more than 15 years Durable and easily washable Dimensions: 320 mm x 270 mm x 2 mm

Legendary micro-woven cloth optimized for low and high DPI tracking movements Non-slip rubber base for ultimate stability Trusted by the pros for more than 15 years Durable and easily washable Dimensions: 320 mm x 270 mm x 2 mm

QcK Perfomance L - Balance, BlackQcK Performance, the first family of performance mousepads engineered with one goal in mind: to elevate your gameplay. Developed in collaboration with top esports athletes, QcK Performance offers three meticulously crafted and unique surfaces: Speed, Balance and Control. Whatever your playstyle, discover the ultimate surface to push your performance to the next level.HIT THE SWEET SPOT - Made with versatile playstyles in mind with medium dynamic friction, measured acceleration, and classic QcK feel. 3.5 MM THICK BASE - Extra density for extra consistency and a soft, comfortable feel LOW-PROFILE STITCHED EDGES - High-grade, premium precision stitching enhances durability for smooth, fray-free edges. EXTRA SOFT NON-SLIP BASE - Our signature material delivers rock-solid stability DECADES OF ESPORTS DOMINANCE - Trusted by pros for 20+ years, the QcK family has scored countless wins at the highest level. L SIZE - Perfect size to cover your mouse movement: 490 x 420 mm QcK Performance Balance Hit The Sweet Spot.Made with versatile playstyles in mind with medium dynamic friction, measured acceleration, and classic QcK feel.Soft Surface for the Best of Both WorldsThe soft, finely woven texture offers a smooth, familiar feel, making it the ideal choice for those who want the perfect blend of speed and control in every movement.Extra Density. Extra Consistency. High-grade neoprene foam creates a stable foundation for your mouse to move at high speeds with no sensor skip, round in, round out.Low-Profile Stitched Edges: Reinforced for maximum durability and no fraying.Non-Slip Neoprene Rubber Base: You make the moves, not your mousepad. Keep it locked down so you can lock in.Specifications Surface Material Nylon Blend Base Material Neoprene Foam Base (QcK Performance Balance L) Dimensions 490 x 420 x 3.5 mm 19.3 x 16.5 x 0.13 in

QcK Perfomance L - Control, BlackQcK Performance, the first family of performance mousepads engineered with one goal in mind: to elevate your gameplay. Developed in collaboration with top esports athletes, QcK Performance offers three meticulously crafted and unique surfaces: Speed, Balance and Control. Whatever your playstyle, discover the ultimate surface to push your performance to the next level.DESIGNED FOR YOUR PLAYSTYLE - The first collection of premium mousepads designed to match your playstyle. Speed, Balance and Control. Friction or Glide? You decide. PERFECTLY PRECISE - Crafted for gamers who prioritize precision above all else, with a micro-textured surface designed for greater aim accuracy. This mousepad is preferred by many gamers who prioritize control over comfort. 3.5 MM THICK BASE - Extra density for extra consistency and a soft, comfortable feel LOW-PROFILE STITCHED EDGES - High-grade, premium precision stitching enhances durability for smooth, fray-free edges. EXTRA SOFT NON-SLIP BASE - Our signature material delivers rock-solid stability DECADES OF ESPORTS DOMINANCE - Trusted by pros for 20+ years, the QcK family has scored countless wins at the highest level. L SIZE - Perfect size to cover your mouse movement: 490 x 420 mm QcK Performance ControlPerfectly Precise Crafted for precision and stopping power, for big moves and microadjustment alike. Perfect for methodical playstyles.Textured Surface for Max Accuracy The micro-textured surface is expertly engineered with just the right amount of drag, to fine-tune your aim. This mousepad has been tested by many gamers who prioritize control over comfort. For a more comfort focused alternative, we recommend the QcK Performance Balance.Extra Density. Extra Consistency. High-grade neoprene foam creates a stable foundation for your mouse to move at high speeds with no sensor skip, round in, round out.Low-Profile Stitched Edges: Reinforced for maximum durability and no fraying.Non-Slip Neoprene Rubber Base: You make the moves, not your mousepad. Keep it locked down so you can lock in.Specifications Surface Material Nylon Blend Base Material Neoprene Foam Base (QcK Performance Balance L) Dimensions 490 x 420 x 3.5 mm 19.3 x 16.5 x 0.13 in

QcK Perfomance XL - Control, BlackQcK Performance, the first family of performance mousepads engineered with one goal in mind: to elevate your gameplay. Developed in collaboration with top esports athletes, QcK Performance offers three meticulously crafted and unique surfaces: Speed, Balance and Control. Whatever your playstyle, discover the ultimate surface to push your performance to the next level.DESIGNED FOR YOUR PLAYSTYLE - The first collection of premium mousepads designed to match your playstyle. Speed, Balance and Control. Friction or Glide? You decide. PERFECTLY PRECISE - Crafted for gamers who prioritize precision above all else, with a micro-textured surface designed for greater aim accuracy. This mousepad is preferred by many gamers who prioritize control over comfort. 3.5 MM THICK BASE - Extra density for extra consistency and a soft, comfortable feel LOW-PROFILE STITCHED EDGES - High-grade, premium precision stitching enhances durability for smooth, fray-free edges. EXTRA SOFT NON-SLIP BASE - Our signature material delivers rock-solid stability DECADES OF ESPORTS DOMINANCE - Trusted by pros for 20+ years, the QcK family has scored countless wins at the highest level. XL SIZE - Encompassing and stylish black surface for your desk in 900 x 400 mm size QcK Performance ControlPerfectly Precise Crafted for precision and stopping power, for big moves and microadjustment alike. Perfect for methodical playstyles.Textured Surface for Max Accuracy The micro-textured surface is expertly engineered with just the right amount of drag, to fine-tune your aim. This mousepad has been tested by many gamers who prioritize control over comfort. For a more comfort focused alternative, we recommend the QcK Performance Balance.Extra Density. Extra Consistency. High-grade neoprene foam creates a stable foundation for your mouse to move at high speeds with no sensor skip, round in, round out.Low-Profile Stitched Edges: Reinforced for maximum durability and no fraying.Non-Slip Neoprene Rubber Base: You make the moves, not your mousepad. Keep it locked down so you can lock in.Specifications Surface Material Nylon Blend Base Material Neoprene Foam Base (QcK Performance Balance XL) Dimensions 900 x 400 x 3.5 mm 35.4 x 16.5 x 0.13 in

Brilliant 2-zone RGB dynamic illumination.

Extra Thick Micro-Woven Mousepad for Maximum Wrist ComfortExtra-thick, non-slip rubber base eliminates unwanted movementExclusive QcK micro-woven cloth for maximum controlOptimized for low and high DPI tracking movementsDurable and washable for easy cleaning450 mm x 400 mm x 6 mmQcK Heavy LUnshakable Foundation For All Your PlaysExperience the most impactful mousepad in gaming with a thicker, sturdier, and even more comfortable surface. QcK Heavy ensures optimal tracking, proven by exhaustive testing by the top sensor manufacturer.You Make the Moves. Not the Mousepad.The durable, non-slip rubber base is designed to eliminate unwanted movement and provide a solid platform for the most competitive gaming. Long-lasting and extremely durable, the QcK is also easy to wash.Legendary Micro-Woven ClothWith over 15 million units sold, experience the most impactful mousepad in gaming. Our micro-woven cloth technology, trusted by casual gamers and esports champions alike, is the original innovation in gaming surfaces.

Extra Thick Micro-Woven Mousepad for Maximum Wrist ComfortExtra Thick, non-slip rubber base eliminates unwanted movementExclusive QcK micro-woven cloth for maximum controlOptimized for low and high DPI tracking movementsDurable and washable for easy cleaning900 mm x 400 mm x 4 mmQcK Heavy XXLUnshakeable Foundation For All Your PlaysExperience the most impactful mousepad in gaming with a thicker, sturdier, and even more comfortable surface. QcK Heavy ensures optimal tracking, proven by exhaustive testing by the top sensor manufacturer.You Make the Moves. Not the Mousepad.The durable, non-slip rubber base is designed to eliminate unwanted movement and provide a solid platform for the most competitive gaming. Long-lasting and extremely durable, the QcK is also easy to wash.Legendary Micro-Woven ClothWith over 15 million units sold, experience the most impactful mousepad in gaming. Our micro-woven cloth technology, trusted by casual gamers and esports champions alike, is the original innovation in gaming surfaces.

Extra Thick Micro-Woven Mousepad for Maximum Wrist ComfortExtra Thick, non-slip rubber base eliminates unwanted movementExclusive QcK micro-woven cloth for maximum controlOptimized for low and high DPI tracking movementsDurable and washable for easy cleaning900 mm x 400 mm x 4 mmQcK Heavy XXLUnshakeable Foundation For All Your PlaysExperience the most impactful mousepad in gaming with a thicker, sturdier, and even more comfortable surface. QcK Heavy ensures optimal tracking, proven by exhaustive testing by the top sensor manufacturer.You Make the Moves. Not the Mousepad.The durable, non-slip rubber base is designed to eliminate unwanted movement and provide a solid platform for the most competitive gaming. Long-lasting and extremely durable, the QcK is also easy to wash.Legendary Micro-Woven ClothWith over 15 million units sold, experience the most impactful mousepad in gaming. Our micro-woven cloth technology, trusted by casual gamers and esports champions alike, is the original innovation in gaming surfaces.

QcK Large - AquaLegendary micro-woven cloth optimized for both low and high DPI tracking movements Non-slip rubber base for maximum stability Trusted by professionals for over 15 years Durable and easy to clean Dimensions: 450 mm x 400 mm x 2 mm

Legendary micro-woven cloth optimized for low and high DPI tracking movements Non-slip rubber base for ultimate stability Trusted by the pros for more than 15 years Durable and easily washable Dimensions: 450 mm x 400 mm x 2 mm

Light up your battlefield!The SteelSeries Engine software opens up an impressive arsenal that makes lighting customization simple and intuitive. Discover all the power of dynamic 2-zone RGB lighting, creating complex lighting effects in seconds.* Wonderful 2-zone RGB dynamic lighting.* Simple and intuitive setup for game-compatible light notifications.* QcK microfiber cloth for maximum control accuracy* Optimal for monitoring both low and high DPI

The SteelSeries QcK XXL Gaming Mouse Pad Faze Clan Edition is a high-quality, extra-large mouse pad designed for serious gamers. Measuring 413mm in height and 90mm in width, with a net weight of 0.41kg, this mouse pad offers ample space for wide-ranging mouse movements, enhancing gaming precision and control. It features the distinctive Faze Clan Edition design, adding a touch of style to your gaming setup. Additionally, this mouse pad comes with a 24-month warranty, ensuring durability and long-term performance.Mouse - Faze ClanMouse pad - Faze ClanKeyboard - Faze ClanHeadset - Faze Clan

The Rival 3 Gen 2 Series gaming mice are engineered for superfast performance, featuring ultra-optimized click latency of just 1.35 ms. This ensures near-instant responsiveness for lightning-fast reactions, allowing gamers to outperform the competition. Additionally, a True Move Core 8,500 DPI optical sensor ensures precision and accuracy with every glide. Durability and endurance are hallmarks of the Rival 3 Gen 2 Series, with 60 million clicks guaranteed. Weighing in at 77 g (95-106 g for the wireless version), the battle-tested design of the Rival 3 promises long-lasting performance, ensuring reliability for years to come. The Rival 3 Gen 2 places a strong emphasis on style, featuring a 360° enhanced underglow powered by SteelSeries Prism lighting technology.Near-instant response at 1.35ms click latency True 1-to-1 tracking with the TrueMove Core optical sensor (8.5K DPI) Unbeatable durability at 60M clicks guaranteed 3-Zone RGB, fully customizable effects compatible with Prism Upgraded Super Mesh paracord and 100% PTFE feet for unparalleled gliding 77g Lightweight and battle-tested shape for comfortable gaming

The Rival 3 Gen 2 Series gaming mice are engineered for superfast performance, featuring ultra-optimized click latency of just 1.35 ms. This ensures near-instant responsiveness for lightning-fast reactions, allowing gamers to outperform the competition. Additionally, a True Move Core 8,500 DPI optical sensor ensures precision and accuracy with every glide. Durability and endurance are hallmarks of the Rival 3 Gen 2 Series, with 60 million clicks guaranteed. Weighing in at 77 g (95-106 g for the wireless version), the battle-tested design of the Rival 3 promises long-lasting performance, ensuring reliability for years to come. The Rival 3 Gen 2 places a strong emphasis on style, featuring a 360° enhanced underglow powered by SteelSeries Prism lighting technology.

The Rival 3 Gen 2 Series gaming mice are engineered for superfast performance, featuring ultra-optimized click latency of just 1.35 ms. This ensures near-instant responsiveness for lightning-fast reactions, allowing gamers to outperform the competition. Additionally, a True Move Core 8,500 DPI optical sensor ensures precision and accuracy with every glide. Durability and endurance are hallmarks of the Rival 3 Gen 2 Series, with 60 million clicks guaranteed. Weighing in at 77 g (95-106 g for the wireless version), the battle-tested design of the Rival 3 promises long-lasting performance, ensuring reliability for years to come. The Rival 3 Gen 2 places a strong emphasis on style, featuring a 360° enhanced underglow powered by SteelSeries Prism lighting technology.

The Rival 3 Gen 2 Series gaming mice are engineered for superfast performance, featuring ultra-optimized click latency of just 1.35 ms. This ensures near-instant responsiveness for lightning-fast reactions, allowing gamers to outperform the competition. Additionally, a True Move Core 8,500 DPI optical sensor ensures precision and accuracy with every glide. Durability and endurance are hallmarks of the Rival 3 Gen 2 Series, with 60 million clicks guaranteed. Weighing in at 77 g (95-106 g for the wireless version), the battle-tested design of the Rival 3 promises long-lasting performance, ensuring reliability for years to come.Faster than ever, at 1.9ms click latency Gaming-grade 2.4GHz wireless and Bluetooth for other devices True 1-to-1 tracking with the TrueMove Air Optical Sensor (18K DPI) Unbeatable durability at 60M clicks guaranteed Battle-tested shape for a lightweight and comfortable gaming mouse with purposeful design

The Rival 3 Gen 2 Series gaming mice are engineered for superfast performance, featuring ultra-optimized click latency of just 1.35 ms. This ensures near-instant responsiveness for lightning-fast reactions, allowing gamers to outperform the competition. Additionally, a True Move Core 8,500 DPI optical sensor ensures precision and accuracy with every glide. Durability and endurance are hallmarks of the Rival 3 Gen 2 Series, with 60 million clicks guaranteed. Weighing in at 77 g (95-106 g for the wireless version), the battle-tested design of the Rival 3 promises long-lasting performance, ensuring reliability for years to come.

The Rival 3 Gen 2 Series gaming mice are engineered for superfast performance, featuring ultra-optimized click latency of just 1.35 ms. This ensures near-instant responsiveness for lightning-fast reactions, allowing gamers to outperform the competition. Additionally, a True Move Core 8,500 DPI optical sensor ensures precision and accuracy with every glide. Durability and endurance are hallmarks of the Rival 3 Gen 2 Series, with 60 million clicks guaranteed. Weighing in at 77 g (95-106 g for the wireless version), the battle-tested design of the Rival 3 promises long-lasting performance, ensuring reliability for years to come.

Dominate any game you play. Rival 5 is the most versatile precision gaming mouse available. Customize 9 programmable buttons to suit your gameplay, including a dedicated quick action toggle switch built for lightning-fast response. Designed by PixArt and SteelSeries to outperform the competition with true 1:1 tracking, 18,000 CPI, 400 IPS, 40G acceleration, as well as tilt tracking to eliminate unwanted tracking during angle drops, tilt hits, and fast moves. Professionals require pixel-perfect precision. The TrueMove Air sensor delivers 3x more accuracy, so every mouse move, from micro-adjustments to flicks, is reproduced exactly as intended in-game. Upgraded dust and waterproof switches rated for 80 million clicks provide flawless clicks even in the toughest conditions, prevent double clicks and take accurate shots to a new level. Fast swipes and quick movements are essential for the best results in the game. The upgraded lighting provides 10 zones with 16.8 million vibrant colors that can be synchronized with other SteelSeries products. Choose from millions of colors and effects, from reactive lighting to interactive light shows that will take your RGB lighting to the next level.

The Stontronics 5.1V DC 3A interchangeable power supply features a USB Type C output connector, interchangeable plug heads for UK and EU, and carries all the relevant local approvals.

Practical USB hub designed for streamers7x USB 3.0 Type A with fast 5 Gbit/s16 interchangeable acrylic iconsPowerful 24W power supply1x USB charging port for your smartphoneCustomizable RGB lightingPlug-and-play - no drivers requiredThe Streamplify HUB CTRL 7 - more control in your streaming setupWant to enhance your stream with a dedicated microphone, a camera, or ring lights, but no longer have any free USB ports? No problem! With the Streamplify HUB CTRL 7, you can use up to seven additional devices at the same time.Fast data transfer rate and charging with quick chargeAll ports comply with the USB 3.0 standard, which enables data transfer speeds of up to 5 Gbit/s. Each USB port has a power button that allows it to be turned on and off. LED indicators for connected devices show you whether a USB port is active. The integrated fast-charging port supports 2 A charging current and is ideal for charging smartphones and other battery-powered devices.Instantly better cable managementWith this Streamplify hub, tangled cables are a thing of the past. Keeping all cables in one place makes your streaming setup look tidy and organized. Also included is a flexible cable holder with integrated clips, making cable management even easier.Everything at a glanceSo you do not get confused during your stream, you can assign an individual icon to each port. You can choose from 16 different icons to adapt the hub to your personal needs and preferences. The acrylic icons are attached above the USB ports.An eye-catcher on your deskDynamic RGB lighting for the acrylic icons makes the Streamplify HUB CTRL 7 a real eye-catcher on your desk. You can conveniently adjust the lighting using the RGB switch on the side of the hub.Convenient and uncomplicatedThanks to plug-and-play, you do not need to install any additional drivers or software and can get started right away. The USB 3.0 ports are equipped with the standard UVC/UVA protocol, making them compatible with almost any device.Technical details:Dimensions:Icons:19 x 23 x 5 mm (W x H x D)HUB CTRL 7:Height: 53 mmLength: 160 mmDiameter: 47 mmColor: BlackConnections:6x USB 3.0 Type A (5 Gbit/s, downstream)1x USB 3.0 Type A fast-charging port (2A/12V)1x USB 3.0 Type A (upstream)Connection cable:1x power supply unit (12V/2A, 24W)1x USB-A to USB-A cablePower cable length: 1.5 mUSB cable length: 1.8 mLighting: RGB LEDPower consumption: 24 watts

Well organized and always connected The Streamplify HUB DECK is a USB hub with 5 USB ports, featuring RGB lighting and individual on/off buttons for each USB slot. With four USB 3.0 ports and one 2.0A USB fast-charging port, you can connect multiple devices simultaneously. Choose from 7 interchangeable keycaps to customize your hub to fit your unique preferences and style. RGB lighting modes, controlled via the RGB control button, add a stylish flair to your setup. Designed for quality and durability, the backlit-compatible keycaps allow the LED lights to shine through. Choose from 7 interchangeable keycaps to tailor your USB hub to your unique preferences and style. Efficient cable management Each USB port has its own power button so you can turn it on or off as needed. LED indicators for connected devices immediately show whether a USB port is active or not. Connect high-power devices such as external hard drives or lamps directly to the hub as a power source. The HUB CTRL 5 features a high-performance 12V/2A, 24W power adapter, ensuring you can operate multiple devices simultaneously without losing power or connectivity. The package includes a flexible cable holder with integrated clips for cable management, allowing you to keep your cables neat and secure. No drivers or software installation required. Simply connect your HUB right out of the box and it's ready to use. The USB 3.0 ports feature the standard UVC/UVA protocol, making them compatible with almost any device. Technical details: Material: Plastic Color: Black Ports: 4x USB 3.0 (USB 3.2 Gen 1, max. 5 Gbit/s) 1x USB 2.0 (max. 480 Mbit/s, supports QuickCharge) USB cable length: 1.8 m Power supply: 12V/2A, 24W

Streaming microphone with RGB lighting Comes with integrated pop filter Built-in background noise filter Plug-and-play via USB for instant use Includes tripod with shock mount Also compatible with PlayStation and Xbox Test 123 - the Streamplify streaming microphone The Streamplify MIC RGB Microphone was specially designed for streamers, content creators, and gamers. This dynamic microphone impresses not only with its excellent and authentic recording quality within a frequency range of 100 Hz to 18 kHz, but also with its stylish design. With the press of a button, you can conveniently stop or resume audio recording. The included pop filter and the shock mount integrated into the tripod help enhance recording quality. Additionally, a built-in filter for background noise filters out quiet sounds in your environment, such as fan noise. Easy connection with plug-and-play Save time thanks to simple connectivity—once you connect the microphone to your streaming setup, it is ready for use. Instead of lengthy driver installations, you can start right away. The Streamplify MIC RGB Microphone connects to your device via USB. This microphone is not only compatible with your computer but also with the latest consoles. RGB lighting in a subtle look To make your microphone look stylish on your stream, you can choose between two different RGB lighting modes or eight static colors. You can adjust the lighting using the dedicated buttons on the microphone shaft.

Dual-tower design, digital display, 2x 120mm PWM fans, 6 heatpipes, AM5 optimised The Sudokoo SK620V is a powerful dual-tower CPU air cooler with an integrated digital display. Optimised for AM5 systems, it combines strong cooling performance with direct temperature readout within the system. Dual-tower heatsink – Large cooling surface for efficient heat dissipation under high CPU loads. 6 heat pipes – Rapid heat transfer from the processor to the cooling fins. 2x 120mm PWM fans – High airflow with automatic speed adjustment. Digital display – Shows relevant system information directly on the cooler. AM5-optimised design – Specifically tailored for current AMD platforms. Powerful cooling performance in a dual-tower format The dual-tower design increases the surface area for effective heat dissipation. This keeps the CPU reliably cool even under heavy load. The SK620V is ideal for gaming and performance systems. Digital display for direct monitoring The integrated display shows important system data in real time. This way, you can keep an eye on temperatures at all times without needing to open additional software windows. At the same time, the cooler becomes a visual highlight inside the case. Optimised for modern AM5 builds The SK620V is specifically designed for AM5 platforms and allows for stable mounting. The solid construction ensures secure retention and long-term reliability. This makes it a powerful solution for current AMD systems.

Sunlu PLA+ Filament (Black)Sunlu PLA+ filament is an excellent choice for those who expect both an aesthetic result and high durability from their 3D prints. The material stands out for its excellent mechanical properties, with an impact resistance of up to 8 kJ/m², which is up to three times better than many standard PLA and PLA+ filaments available on the market. As a result, prints are more resistant to damage while retaining their intense, deep color. It is an excellent choice for both functional projects and models where durability and an aesthetic finish are essential.Smooth, precise printingSunlu PLA+ with a 1.75 mm diameter is designed for stable and trouble-free operation. High dimensional accuracy of ±0.02 mm and a uniform diameter ensure smooth material feeding and consistent results. The filament features low shrinkage, good interlayer adhesion, and ease of use, helping you achieve aesthetically pleasing, consistent prints without unnecessary complications. An additional advantage is the reduction of typical printing issues—the material has been designed to minimize the risk of nozzle clogging, air bubbles, tangling, warping, or excessive stringing.Evenly wound filament for greater ease of useOne of the greatest advantages of Sunlu PLA+ filament is its careful, 100% even winding. Thanks to advanced technology patented by Sunlu, the material is arranged on the spool in an orderly manner, which reduces the risk of knots, tangles, and unwinding issues during use. This directly contributes to greater printing efficiency and ease of use, especially for longer and more demanding projects. Whether you’re printing as a hobbyist or working on more advanced models, you can count on stable performance and greater ease of use.Wide compatibility and flexible print settingsSunlu PLA+ filament is compatible with virtually all FDM 3D printers that support 1.75 mm filament, making it ideal for use with devices from brands such as Bambu Lab, Creality, Prusa, and Anycubic. Printing is recommended at a speed of 50–100 mm/s at a temperature of 195–205°C or 100–300 mm/s at 205–220°C, offering great flexibility in adjusting parameters to a specific model and printer. This filament combines strength, precision, and reliability, helping you achieve excellent results across a wide range of applications. ManufacturerSunluModelPLA+ BDensity1.23 g/cm³Vicat softening temperature54 °CHeat deflection temperature (HDT)53 °CMelting temperature164 °CMelt flow rate6.3 g/10 minTensile strength64 MPaElongation at break17 %Flexural strength86 MPaFlexural modulus2907 MPaIZOD impact strength (X-Y)3.5 kJ/m²

Sunlu PLA+ Filament (Cherry)Sunlu PLA+ filament is an excellent choice for those who expect both an aesthetic result and high durability from their 3D prints. The material stands out for its excellent mechanical properties, with an impact resistance of up to 8 kJ/m², which is up to three times better than many standard PLA and PLA+ filaments available on the market. As a result, prints are more resistant to damage while retaining their intense, deep color. It is an excellent choice for both functional projects and models where durability and an aesthetic finish are essential.Smooth, precise printingSunlu PLA+ with a 1.75 mm diameter is designed for stable and trouble-free operation. High dimensional accuracy of ±0.02 mm and a uniform diameter ensure smooth material feeding and consistent results. The filament features low shrinkage, good interlayer adhesion, and ease of use, helping you achieve aesthetically pleasing, consistent prints without unnecessary complications. An additional advantage is the reduction of typical printing issues—the material has been designed to minimize the risk of nozzle clogging, air bubbles, tangling, warping, or excessive stringing.Evenly wound filament for greater ease of useOne of the greatest advantages of Sunlu PLA+ filament is its careful, 100% even winding. Thanks to advanced technology patented by Sunlu, the material is arranged on the spool in an orderly manner, which reduces the risk of knots, tangles, and unwinding issues during use. This directly contributes to greater printing efficiency and ease of use, especially for longer and more demanding projects. Whether you’re printing as a hobbyist or working on more advanced models, you can count on stable performance and greater ease of use.Wide compatibility and flexible print settingsSunlu PLA+ filament is compatible with virtually all FDM 3D printers that support 1.75 mm filament, making it ideal for use with devices from brands such as Bambu Lab, Creality, Prusa, and Anycubic. Printing is recommended at a speed of 50–100 mm/s at a temperature of 195–205°C or 100–300 mm/s at 205–220°C, offering great flexibility in adjusting parameters to a specific model and printer. This filament combines strength, precision, and reliability, helping you achieve excellent results across a wide range of applications. ManufacturerSunluModelPLA+ CRColorCherryDensity1.23 g/cm³Vicat softening temperature54 °CHeat deflection temperature (HDT)53 °CMelting temperature164 °CMelt flow rate6.3 g/10 minTensile strength64 MPaElongation at break17 %Flexural strength86 MPaFlexural modulus2907 MPaIZOD impact strength (X-Y)3.5 kJ/m²

Sunlu PLA+ Filament (Green)Sunlu PLA+ filament is an excellent choice for those who expect both an aesthetic result and high durability from their 3D prints. The material stands out for its excellent mechanical properties, with an impact resistance of up to 8 kJ/m², which is up to three times better than many standard PLA and PLA+ filaments available on the market. As a result, prints are more resistant to damage while retaining their intense, deep color. It is an excellent choice for both functional projects and models where durability and an aesthetic finish are essential.Smooth, precise printingSunlu PLA+ with a 1.75 mm diameter is designed for stable and trouble-free operation. High dimensional accuracy of ±0.02 mm and a uniform diameter ensure smooth material feeding and consistent results. The filament features low shrinkage, good interlayer adhesion, and ease of use, helping you achieve aesthetically pleasing, consistent prints without unnecessary complications. An additional advantage is the reduction of typical printing issues—the material has been designed to minimize the risk of nozzle clogging, air bubbles, tangling, warping, or excessive stringing.Evenly wound filament for greater ease of useOne of the greatest advantages of Sunlu PLA+ filament is its careful, 100% even winding. Thanks to advanced technology patented by Sunlu, the material is arranged on the spool in an orderly manner, which reduces the risk of knots, tangles, and unwinding issues during use. This directly contributes to greater printing efficiency and ease of use, especially for longer and more demanding projects. Whether you’re printing as a hobbyist or working on more advanced models, you can count on stable performance and greater ease of use.Wide compatibility and flexible print settingsSunlu PLA+ filament is compatible with virtually all FDM 3D printers that support 1.75 mm filament, making it ideal for use with devices from brands such as Bambu Lab, Creality, Prusa, and Anycubic. Printing is recommended at a speed of 50–100 mm/s at a temperature of 195–205°C or 100–300 mm/s at 205–220°C, offering great flexibility in adjusting parameters to a specific model and printer. This filament combines strength, precision, and reliability, helping you achieve excellent results across a wide range of applications. ManufacturerSunluModelPLA+ GColorGreenDensity1.23 g/cm³Vicat softening temperature54 °CHeat deflection temperature (HDT)53 °CMelting temperature164 °CMelt flow rate6.3 g/10 minTensile strength64 MPaElongation at break17 %Flexural strength86 MPaFlexural modulus2907 MPaIZOD impact strength (X-Y)3.5 kJ/m²

Sunlu PLA+ Filament (White)Sunlu PLA+ filament is an excellent choice for those who expect both an aesthetic result and high durability from their 3D prints. The material stands out for its excellent mechanical properties, with an impact resistance of up to 8 kJ/m², which is up to three times better than many standard PLA and PLA+ filaments available on the market. As a result, prints are more resistant to damage while retaining their intense, deep color. It is an excellent choice for both functional projects and models where durability and an aesthetic finish are essential.Smooth, precise printingSunlu PLA+ with a 1.75 mm diameter is designed for stable and trouble-free operation. High dimensional accuracy of ±0.02 mm and a uniform diameter ensure smooth material feeding and consistent results. The filament features low shrinkage, good interlayer adhesion, and ease of use, helping you achieve aesthetically pleasing, consistent prints without unnecessary complications. An additional advantage is the reduction of typical printing issues—the material has been designed to minimize the risk of nozzle clogging, air bubbles, tangling, warping, or excessive stringing.Evenly wound filament for greater ease of useOne of the greatest advantages of Sunlu PLA+ filament is its careful, 100% even winding. Thanks to advanced technology patented by Sunlu, the material is arranged on the spool in an orderly manner, which reduces the risk of knots, tangles, and unwinding issues during use. This directly contributes to greater printing efficiency and ease of use, especially for longer and more demanding projects. Whether you’re printing as a hobbyist or working on more advanced models, you can count on stable performance and greater ease of use.Wide compatibility and flexible print settingsSunlu PLA+ filament is compatible with virtually all FDM 3D printers that support 1.75 mm filament, making it ideal for use with devices from brands such as Bambu Lab, Creality, Prusa, and Anycubic. Printing is recommended at a speed of 50–100 mm/s at a temperature of 195–205°C or 100–300 mm/s at 205–220°C, offering great flexibility in adjusting parameters to a specific model and printer. This filament combines strength, precision, and reliability, helping you achieve excellent results across a wide range of applications. ManufacturerSunluModelPLA+ WColorWhiteDensity1.23 g/cm³Vicat softening temperature54 °CHeat deflection temperature (HDT)53 °CMelting temperature164 °CMelt flow index6.3 g/10 minTensile strength64 MPaElongation at break17 %Flexural strength86 MPaFlexural modulus2907 MPaIZOD impact strength (X-Y)3.5 kJ/m²

Sunlu PLA+ Filament (Yellow)Sunlu PLA+ filament is an excellent choice for those who expect both an aesthetic result and high durability from their 3D prints. The material stands out for its excellent mechanical properties, with an impact resistance of up to 8 kJ/m², which is up to three times better than many standard PLA and PLA+ filaments available on the market. As a result, prints are more resistant to damage while retaining their intense, deep color. It is an excellent choice for both functional projects and models where durability and an aesthetic finish are essential.Smooth, precise printingSunlu PLA+ with a 1.75 mm diameter is designed for stable and trouble-free operation. High dimensional accuracy of ±0.02 mm and a uniform diameter ensure smooth material feeding and consistent results. The filament features low shrinkage, good interlayer adhesion, and ease of use, helping you achieve aesthetically pleasing, consistent prints without unnecessary complications. An additional advantage is the reduction of typical printing issues—the material has been designed to minimize the risk of nozzle clogging, air bubbles, tangling, warping, or excessive stringing.Evenly wound filament for greater ease of useOne of the greatest advantages of Sunlu PLA+ filament is its careful, 100% even winding. Thanks to advanced technology patented by Sunlu, the material is arranged on the spool in an orderly manner, which reduces the risk of knots, tangles, and unwinding issues during use. This directly contributes to greater printing efficiency and ease of use, especially for longer and more demanding projects. Whether you’re printing as a hobbyist or working on more advanced models, you can count on stable performance and greater ease of use.Wide compatibility and flexible print settingsSunlu PLA+ filament is compatible with virtually all FDM 3D printers that support 1.75 mm filament, making it ideal for use with devices from brands such as Bambu Lab, Creality, Prusa, and Anycubic. Printing is recommended at a speed of 50–100 mm/s at a temperature of 195–205°C or 100–300 mm/s at 205–220°C, offering great flexibility in adjusting parameters to a specific model and printer. This filament combines strength, precision, and reliability, helping you achieve great results across a wide range of applications. ManufacturerSunluModelPLA+ YColorYellowDensity1.23 g/cm³Vicat softening temperature54 °CHeat deflection temperature (HDT)53 °CMelting temperature164 °CMelt flow rate6.3 g/10 minTensile strength64 MPaElongation at break17 %Flexural strength86 MPaFlexural modulus2907 MPaIZOD impact strength (X-Y)3.5 kJ/m²

Sunlu PLA+ Silk Filament (Rainbow) 03Sunlu's rainbow-colored filament is an excellent choice for those who want to give their 3D prints a unique, glossy finish. The material creates a bright, shimmering surface, making models look exceptionally attractive without any additional finishing. A gradual color shift approximately every 8 meters gives each print a unique, rainbow-like appearance that catches the eye and highlights the design’s details.Precision and smooth printing without compromiseSunlu filament is designed for high precision and a stable printing process. The carefully wound spool minimizes the risk of filament tangling, ensuring smooth and trouble-free printer operation. The recommended nozzle temperature is 200–210°C, and the build plate temperature is 50–60°C, allowing for optimal results while maintaining good first-layer adhesion. You’ll achieve the best results at a print speed of 40–60 mm/s, ensuring that every detail is reproduced with high precision.Wide compatibility and ease of useThe filament is compatible with most FDM 3D printers, making it a versatile solution for both beginners and more advanced users. PLA+ material is easy to print with and stable, making it ideal for a wide range of projects—from decorations to more complex models. Additionally, the use of eco-friendly components makes it a more environmentally friendly choice.Well-maintained and properly preparedTo ensure the highest print quality, the filament should be dried at 50°C, which helps maintain its properties and prevents issues during printing. The practical spool design with multiple holes supports effective and even drying of the material. This ensures the filament maintains optimal performance, allowing you to focus on bringing your creative ideas to life without unnecessary complications. ManufacturerSunluModelPLA+ Silk R 03ColorRainbow (03)Diameter1.75 ± 0.02 mmPrinting Temperature205–215°C: 50–100 mm/s / 215–235°C: 100–200 mm/sBed TemperatureApply adhesive before heating; once heated to 50–60°C, adhesive is not neededAir bubbles100% bubble-freeWeight1 kg/spoolLength1.75 mm (1 kg) = 330 m

Sunnylife anti-shock buckle for DJI FlipThe Sunnylife anti-shake buckle for DJI Flip is a small but highly effective accessory that significantly improves the drone's stability during flight. Its integrated design connects the front and rear arms, reducing vibration and resonance, resulting in smoother in-flight shots and greater control precision. It's a must-have for any pilot who expects maximum control even in difficult conditions.Arm reinforcement and structural protectionThe mount acts as an additional reinforcing element - it prevents accidental folding of the arms in a collision, which could lead to damage to the drone's fuselage. Thanks to precision molding, the bracket fits perfectly into the structure of the DJI Flip without limiting its functionality. Made of lightweight but durable materials, it weighs just 8 grams - so it doesn't affect the drone's maneuvers or flight time.Easy installation, robust designThe buckle has been designed with the user's convenience in mind - the snap-on system allows quick installation and removal without tools. Anti-shock and anti-collision properties make this accessory an excellent choice for anyone who wants to further secure their equipment and ensure its longer life. ManufacturerSunnylifeModelFP-GK976Compatible modelsDJI FLIPMaterial of constructionPlasticWeight8 gDimensions26 x 43 x 19 mm

Sunnylife hard case for Neo 2 Fly More Combo kitThe Sunnylife Hard Case for DJI Neo 2 Fly More Combo will allow you to safely transport and store your drone and accessories. Its large capacity, sturdy construction and precisely fitted interior allow you to effectively protect your equipment from mechanical damage, moisture and shock during travel and field use. You can also purchase an optional shoulder strap to make carrying your devices even easier.Large capacity to fit the Fly More ComboThe case holds the DJI Neo 2 drone, charging hub, 6 batteries (including one in the drone and three in the hub), control camera and additional accessories such as propellers, filters or cables. This allows the entire kit to be transported together, without the need for several separate cases. Such a solution makes it easier to organize the equipment and protects it from shocks.Thoughtful interior designThe interior of the case is distinguished by a two-layer structure and has been divided in such a way that it is possible to logically and safely arrange all the elements of the kit. Both the drone and accessories have their own place - they will not move during transport.Resistance to impacts, pressure and external conditionsThe case is made of tough, durable material with high resistance to compression and loads. The product also features resistance to temperature changes and corrosion, which ensures effective protection of the equipment during heavy use and transportation. What's more, the closed, leak-proof design effectively protects the interior from water ingress in case of splashing, so you can safely transport your equipment in changing weather conditions. ManufacturerSunnylifeNameSunnylife Fly More Combo CaseModelAQX-26CompatibilityDJI Neo 2Weight1.64 kgDimensions35.4 × 29.4 × 13.7 cm

Sunnylife head mount for sports cameras (TD672-GY)The Sunnylife head mount model TD672-GY is an essential gadget for sports and outdoor activity enthusiasts who want to document their experiences while keeping their hands free. Lightweight, durable and comfortable, it is ideal for anyone who wants to capture their adventures from a first-person perspective.Design and materialsDesigned with convenience and functionality in mind, the TD672-GY mount weighs only 96 grams and is made of a flexible band combined with sturdy plastic. This makes it both durable and comfortable even with prolonged use. The elasticity of the material ensures a perfect fit to the shape of the head.Versatility and adjustabilityThe mount is compatible with most sports cameras, making it a versatile tool for a variety of activities. It can be used in many scenarios - from blogging, cycling and skateboarding to running or kayaking. The 360° adjustable swivel base allows for precise camera positioning to guarantee shots from the optimal angle.Comfort and personalizationThe head strap is easy to adjust, and can be fastened vertically and horizontally with two buckles, allowing a perfect fit for different head sizes and shapes. The soft, flexible headband guarantees wearing comfort, and the ability to easily detach it makes it easy to clean and replace.Application and functionalityWith the ability to support horizontal and vertical shooting, the TD672-GY mount provides a flexible solution that adapts to the user's needs for the best POV shots. Such features make this mount an ideal choice for those who want to document their experiences from a dynamic perspective while maintaining full freedom of movement. ManufacturerSunnylifeModelTD672-GYMaterialElastic band + plasticWeight96 gCompatibilityAction sports cameras, GoPro, Insta360 GO series (including GO 3S), Insta360 ONE R, Insta360 ONE X (with 1/4" adapter), Pocket series (with 1/4" adapter), smartphones, etc.Lengthmin. 45 × 22 cm; max. 35 × 61 cm

Sunnylife lanyard with attachment for DJI RC-N1 / RC-N2 / RC-N3 controller (GK507).Want to make using the controller for the RC-N1, RC-N2 or RC-N3 even more comfortable? Equip yourself with a lanyard with Sunnylife attachment! It will make operating your DJI drone even more enjoyable. From today you will always have the controller with you.Comfort of useThe lanyard with attachment is designed with comfort in mind. The controller for the RC-N1 , RC-N2 and RC-N3 does not have a hole to mount a comfortable lanyard, so the accessory from Sunnylife will solve this problem. You will mount it in one easy step. From today you will be able to comfortably wear the controller around your neck. ManufacturerSunnylifeModelGK507MaterialPlasticWeight41 g

Sunnylife lens hood for DJI Flip (black)The Sunnylife Lens Shield for DJI Flip is an indispensable accessory for anyone who wants to get maximum clear and crisp images when filming in difficult lighting conditions. Thanks to its design, it effectively blocks light that can cause reflections and a decrease in the quality of recordings. Perfectly matched to the design of the DJI Flip drone, it does not interfere with the lens or vision system.Thoughtful design without compromiseThe hood has been precisely molded so as not to restrict the field of view or camera movement during recording. What's more, it can easily be used at the same time as the Sunnylife lens filters, without removing them. It's a solution that combines convenience with functionality - ideal for demanding drone operators.Style, lightness and compatibilityMade of high-quality materials, the cover features a sleek design, pleasant texture and a solid finish. It fits securely in Sunnylife's dedicated B957, B958, B959 bags and AQX-19 protective case for easy transport and storage. It's a practical accessory that not only protects your equipment, but also enhances the quality of your shots. ManufacturerSunnylifeModelFP-ZG970-DCompatible modelsDJI FLIPMaterial of constructionPlasticWeight9 gColorBlackDimensions43 x 44 x 60 mm

Sunnylife MJ-175 Backpack MountThe Sunnylife MJ-175 Backpack Mount is a practical accessory designed for the DJI Osmo Pocket 4P, Osmo Pocket 4, and Osmo Pocket 3, allowing you to conveniently mount the camera on a backpack strap, hat, clothing, or other gear. The magnetic adapter with a quick-mount feature allows you to attach and remove the camera in an instant, and the ability to mount it both vertically and horizontally gives you greater freedom while recording. The sturdy construction, made of plastic, aluminum alloy, magnets, and silicone, ensures durability and stability, while its compact size makes the mount easy to take along on any trip.Quick Mounting and Greater Freedom to RecordBuilt-in high-strength magnets allow you to quickly attach the camera without the need for additional tools. This means changing the mounting location takes just a moment, making it easy to capture dynamic shots during walks, trips, or outdoor activities. The mount can be clipped to a backpack strap, the brim of a hat, or clothing, ensuring the camera is always in a convenient spot. The ability to mount it in both portrait and landscape orientations makes it easy to adjust the recording style to the type of footage you’re capturing.Stable Mounting in Various ConditionsThe Sunnylife MJ-175 is equipped with multi-row serrations and a strong spring mechanism, which ensure a secure grip even while in motion. This design reduces the risk of the mount shifting or the camera accidentally detaching, thereby increasing the safety of the equipment during use. An additional advantage is the magnetic base, which can be attached to metal surfaces such as a refrigerator or other steel objects. As a result, the mount is ideal not only for outdoor filming but also for capturing static shots, product presentations, or instructional videos.Lightweight and Durable ConstructionThe mount is made from a combination of plastic, aluminum alloy, magnets, and silicone, which ensures high durability while keeping the weight low. The product weighs just 87 g, so it won’t weigh down your backpack or clothing and remains comfortable even during extended use. Its compact dimensions of 81 × 61 × 41 mm mean it fits easily into a bag or backpack, and its small packaging makes it easy to transport and store. It’s a practical accessory for people who want to keep their camera close at hand and quickly change how it’s mounted depending on the situation.IncludedSunnylife MJ-175 Backpack MountMagnetic mounting plate ManufacturerSunnylifeModelMJ-175CompatibilityDJI Osmo Pocket 4P / Osmo Pocket 4 / Osmo Pocket 3Materialplastic, aluminum alloy, magnet, siliconeMounting methodmagnetic adapter with clipMounting optionsvertical and horizontalWeight87 gDimensions81 × 61 × 41 mm

Sunnylife overlay for DJI NeoDiscover new possibilities for play with the Sunnylife Overlay for DJI NEO, which combines advanced drone technology with the joy of creating with building blocks. It offers unlimited creative possibilities, allowing you to develop your imagination and hands-on skills. Thanks to its versatility, every NEO user can enjoy lots of fun, creating unique constructions to enhance their flight experience.Stability and durabilityThe cap is made of high-quality ABS material, which ensures its durability and resistance to damage. Weighing in at just 3 grams, the overlay does not negatively affect the drone's flight, and its perfect size for the DJI NEO ensures easy installation and convenient use. This is the perfect accessory for anyone who wants to combine fun with technology! ManufacturerSunnylifeModelNE-AD878CompatibilityDJI NEOMaterialABSWeight3g

SUNNYLIFE propeller guards for DJI Neo (red)The SUNNYLIFE propeller guard is an indispensable accessory for any DJI Neo user looking for an effective way to protect their drone. Thanks to its perfect fit to the design of the device, the accessory increases safety during flight without interfering with the propellers.Lightweight and durableA lightweight but sturdy plastic was used to make the cover. The low weight (just 6g) minimizes the impact on the drone's performance, allowing smooth and stable flight even during demanding maneuvers. SUNNYLIFE's product not only insulates and protects the delicate components of the device, but also protects the environment from accidental collisions.Hassle-free installation and compatibilityInstallation of the SUNNYLIFE propeller guard is quick and intuitive. You don't have to worry about distinguishing sides - just fit the guard to the holes in the drone. In addition, the product is compatible with the SUNNYLIFE LG865 landing gear. ManufacturerSunnylifeManufacturer codeNE-KC863-RCompatibilityDJI NeoMaterialPlasticDimensions53 x 130 cmWeight6 gColorRed

Sunnylife lens protection for Insta360 X3 (IST-BHT502)Worried about damaging the lens of your Insta360 X3 camera? Take care of its reliable protection! The Sunnylife silicone cover will help you avoid its scratching or cracking, and will also allow you to transport and store it safely. You can also combine it with a dedicated camera protection.Top quality workmanship - reliable protectionThe accessory is made of high-quality silicone. It will effectively protect the camera lens from damage due to a fall or impact. It will also provide it with protection from scratches. It will also allow you to safely store and carry your device. Don't worry that it will be damaged during transport!BrandSunnylifeModelIST-BHT502ColorBlackMaterialSiliconeWeight9 gCompatibilityInsta360 X3

Sunnylife tempered glass for DJI Action 5 ProSunnylife tempered glass is the perfect solution to effectively protect your screen and camera lens from damage. With a hardness of 9H, the glass provides reliable protection, making it an ideal choice for those looking for long-lasting protection. In addition, the high light transmission guarantees realistic color reproduction, making images and videos clear and full of detail.Effective protectionThe glass is resistant to fingerprints, greasy stains and dust. As a result, you can enjoy a pristine surface, free from unsightly marks, which is especially important for everyday use. The glass effectively protects both the screen and the camera lens, ensuring full functionality of the device without worrying about scratches or dirt.IncludedTempered glass for the front screenTempered glass for the rear screenTempered glass for the lenscasemicrofiber clothcleaning tissue soaked in alcoholdust-absorbing stickers ManufacturerSunnylifeModelOA5-BHM884Materialtempered glassCompatibilityDJI Action 5 Pro

Sunnylife universal mount for sports cameras (DZ762)Record breathtaking footage. The Sunnylife mount allows you to record from a variety of perspectives, and it has a weight capacity of 300g. Reliable magnets ensure a stable mount. The product is compatible with most action cameras and with many Sunnylife accessories, including BK743, AD748, AD720 adapters. It will also work well as a magnetic phone mount.Adjustable viewing angle and high lifting capacityThe Sunnylife mount allows you to adjust the camera's angles, making it easier to film from the bottom and top perspectives. The solution used expands creative possibilities and helps to capture every moment from an intriguing point of view. In addition, the maximum lifting capacity of the product is 300g, so you can successfully use it with your action camera and smartphone.Strong magnetic adsorption6 magnets guarantee the safety of the camera, even during intense outdoor sports. The magnetic force ensures the stability of the mount and the safety of the device. In addition, the product can be used as a magnetic phone holder, which further enhances its functionality. With Sunnylife you can record without stress!Stability and securityThe base of the mount increases the contact area between the camera and the plane, which translates into greater stability of the device. In addition, the non-slip silicone pad protects against scratches and ensures that the camera stays securely in place.Various usage scenariosWith the Sunnylife mount, you can record in a variety of situations, such as while driving or biking. You will also create vlogs or time lapse shots. You don't have to limit yourself!Great compatibilityThanks to the 1/4" adapter, the mount is compatible with Osmo Pocket 3/2, Insta360 ONE X 3/2/1, Insta360 X4/X5, Insta360 GO 3/ GO 3S and FIMI PALM 2/1 cameras, among others. As a result, it is a great choice for people who use different camera models. ManufacturerSunnylifeModelDZ762MaterialPlastic + magnet + siliconeWeight41 gCompatibilityOsmo Pocket 3/2, Insta360 ONE X 3/2/1, Insta360 X4/X5, Insta360 GO 3/ GO 3S and FIMI PALM 2/1 cameras.

ATX-3.1 power supply from Super FlowerFixed cabling850W rated power for your gaming components80-PLUS-Bronze certificate for absolute efficiencyQuiet 120-mm fanEfficient and Cost-Effective ATX-3.1 Power Supply with 80 BronzeThe ATX power supply Combat DB from Super Flower is perfectly suited for gaming PCs with 850W rated power and high-end components. The power supply has an 80-PLUS-Bronze certificate. At 50% load, it achieves an efficiency of up to 85%. This leads to less heat, less fan noise, and significantly higher reliability.Optimal CoolingThe ATX form factor allows for installation in most cases. This enables the Combat DB to utilize excellent cooling and effective airflow despite its high power output.Connection OptionsOn the back of the power supply are the essential connectors required for your hardware components. These are fixed. Among them is the connector for supplying power to the motherboard, CPU, and graphics card.Technical DetailsColor: BlackDimensions: 150 x 86 x 140 mm (W x H x D)Fan: 120 mmStandard: ATX 3.1Power: 850WEfficiency: 80 PLUS Bronze certificateConnections: 1x 20 / 24-Pin 2x 4 / 8-Pin ATX12V 2x 6 / 8-Pin PCIe 6x SATA 4x Molex 1x PCIe 16-PinProtection: OPP, OVP, SCP, OCP, OTP, UVP

The PRF 4-44 / 520 GREEN 520 ml is a high-quality, non-flammable aerosol designed for various applications. This product, from the renowned brand PRF, is perfect for cleaning and dust removal in sensitive environments. Its 520 ml cylinder ensures you have enough product for multiple uses, making it a reliable option for both professional and personal applications. The green label signifies its non-flammable nature, providing an extra layer of safety during use.

Exceptional SLIM travel charger with a USB-C output, 20W power, and POWER DELIVERY technology. The perfect charger not only for iPhone 12. You can place your smartphone stand on top of the charger. Packed in SWISSTEN packaging. Specifications: Input: 100V-240V, 50-60Hz, 0.5A USB-C Output: PD 3.0: 5V/3A, 9V/2.22A Max. power 20W