2-in-1 Superfire TH04 Headlamp, 600lm, USB-CCamping, mountain climbing, or perhaps a bike trip? When gearing up for outdoor activities, it's worth equipping yourself with a reliable source of light. The SuperFire headlamp offers a total of 5 operating modes, with a light brightness reaching up to 600 lumens. The device is waterproof at IP44 level and can withstand drops from a height of 1 meter. Despite its sturdy construction, it weighs only 114 grams, so it won't burden your head. After removing the strap, you can use the product as a handheld flashlight.5 Operating ModesThe SuperFire headlamp features 5 operating modes. The Low, Medium, and Strong modes differ in brightness (from 116 lm to 600 lm), beam range (from 56 m to 127 m), and light intensity (from 784 cd to 4032 cd). The device also offers flashing light in Strobe mode and the option to activate an SOS light signal. This allows you to adjust the flashlight's operation to the current situation - for example, illuminate distant objects using the Strong mode or activate the Low mode to comfortably check the map after dark. You can also effectively notify traffic participants of your presence and call for help in emergency situations.Lightweight and Compact DesignThe weight of the flashlight is only 114 grams, so you won't feel any head burden even during prolonged use. The device's strap can be removed - as a result, the TH04 model can serve not only as a headlamp but also as a handheld flashlight, which proves reliable when you need to direct the light beam to a specific area or when searching for items in dark corners of the garage or basement.Convenient One-Handed OperationThe practical button allows convenient management of the flashlight's operation. This allows you to control the device with one hand without having to remove gloves during low temperatures.Ready for ActionWith SuperFire, you'll be prepared for a weekend in the field without any unpleasant surprises. The USB-C port allows for convenient charging. The device indicates the battery status - red light indicates charging, while blue light indicates that the flashlight is fully charged. The maximum operating time of the TH04 model is 15 hours (when using the Low mode).Durable ConstructionHarsh weather conditions are not a challenge for the SuperFire flashlight. The device is waterproof at IP44 level, allowing you to freely use it even in the rain. Thanks to its solid construction, the TH04 model can also withstand drops from a height of 1 meter. ManufacturerSuperFireModelTH04Operating ModesStrong / Medium / Low / Strobe / SOS / OFFBrightness600 lm (in Strong mode) / 216 lm (in Medium mode) / 116 lm (in Low mode)Beam Range127 m (in Strong mode) / 77 m (in Medium mode) / 56 m (in Low mode)Maximum Light Intensity4032 cd (in Strong mode) / 1482 cd (in Medium mode) / 784 cd (in Low mode)Charging PortUSB-CBattery Type18650Operating Time3 hours (in Strong mode) / 9 hours (in Medium mode) / 15 hours (in Low mode)Power5WDrop Resistanceyes, from a height of 1 meterWaterproofIP44Weight114 gDimensions111 x 27 x 24 mm
xTool F1-Mint GreenThe xTool F1-Mint Green is a unique, portable laser engraving device that combines advanced technology, versatility, and ease of use. It stands out for its remarkable speed, high precision, and the ability to work with a variety of materials, making it the perfect tool for professionals and hobbyists alike. Thanks to its user-friendly software, the xTool F1 is easy to operate and customize to individual needs.Exceptional Laser Performance and VersatilityThe xTool F1 is equipped with two lasers - a 10W 455nm diode laser and a 2W 1064nm infrared laser. This combination allows engraving on a wide range of materials, from wood and leather to metals such as stainless steel and gold. The device delivers exceptional engraving quality, thanks to the use of an industrial-grade TURE galvanometer, ensuring high efficiency and precision.Intuitive and Advanced SoftwareThe xTool F1 comes with user-friendly XCS software, compatible with Lightburn. It offers extensive editing capabilities, including element alignment, grouping, and merging. It supports various file formats, making it suitable for a wide range of projects.High Resolution and Realistic EngravingWith advanced technologies, the xTool F1 offers engraving in Ultra HD resolution. Its powerful algorithm ensures an unparalleled level of detail and realism while calculating the fastest path to complete the work.Safety and User ComfortThe device features a fully enclosed cover, preventing eye damage from strong laser light and capturing any toxic odors and smoke. Additionally, it is equipped with overheating protection systems, password lock, and laser protection. Built-in fan and air purifier eliminate noise and unpleasant odors, enabling comfortable use in various spaces.Precise Focus Adjustment and Intelligent Engraving PathThe device offers autofocus and manual focus adjustment functions, ensuring high precision work. Furthermore, the intelligent engraving path algorithm optimizes the process, reducing work time while maintaining high-quality results. The ability to preview the project at the engraving location greatly simplifies project preparation and execution.SpecificationsBrandxToolModelF1ColorMint GreenLaser Power10W (diode), 2W (infrared laser)Speed4000mm/sAccuracy0.00199mmAutofocusYesDimensions179 x 235 x 334mmWeight4.6kgWorking Area115 x 115 rounded squareConnectivityWiFi & USBSupported FormatsSVG / DXF / JPG/ JPEG / PNG / BMP, ETC.Supported SystemsAndroid / iOS / iPad / Windows / macOSInput24V 5A
2-in-1 xTool S1 40W Basic Laser Engraver (Black)The xTool S1 engraving machine is an advanced engraving device that offers unmatched precision and versatility. Ideal for beginners and advanced users alike, it enables even the most demanding projects. With four interchangeable laser modules, the xTool S1 is easily adaptable to different work scenarios, making it an extremely flexible tool. Included with the engraver you will find a mini fire kit, which automatically puts out the fire when it detects an emerging threat.Reliable engraving precisionThe xTool S1 40W provides exceptional accuracy thanks to its small laser spot size of 0.08 x 0.10 mm. This precision allows for extremely detailed engravings that are unattainable by other devices in this class. With an operating speed of 600 mm/s, complex projects can be completed quickly and efficiently, significantly increasing productivity.Large working spaceThe xTool S1 engraving machine offers an impressive working space of 498 x 319 mm, allowing larger projects to be completed without having to move material frequently.Intuitive operation and wide compatibilityThe xTool S1 is compatible with Android, iOS, Windows 10 and higher, and macOS, so it can be operated from a variety of devices such as smartphones, tablets and computers. The device also supports popular file formats, including SVG, DXF, JPG, JPEG, PNG, BMP and TIF, allowing you to easily import designs for engraving.Advanced softwareThe device works with XCS and Lightburn software, which offer advanced editing and engraving control functions. You can easily create and modify designs, and manage laser settings to get the best results.Ergonomic design and mobilityWith a weight of 20 kg and compact dimensions of 765 x 561 x 183 mm (without base) and 765 x 561 x 268 mm (with base), the xTool S1 is easy to carry and set up. The sturdy design provides stability during operation, while allowing the unit to be easily moved when needed.Included2-in-1 xTool S1 40W laser engraving machineHoneycomb panel for cutting outSmart Air Assist worth PLN 679xTool Select material kitAutomatyczny system gaśniczy xTool Fire Safety Set dla S1 o wartości 679 zł Manufacturer:xToolModel:S1Manufacturer code:S1B-BName:xTool S1 40W Laser MachineLaser power:40WSpot size:0.08 x 0.10 mmWorking speed:600 mm/sWorking area:498 x 319 mmWorking area with automatic feeder:470 mm x 3000 mm (additional feed path required)Output voltage:25V 11AConnection method:USB/Wi-FiSupported systems:Android, iOS, Windows 10 and above, macOSSoftware:XCS/LightburnSupported file formats:SVG, DXF, JPG, JPEG, PNG, BMP, TIFProduct weight:20 kgProduct dimensions:765 x 561 x 183 mm (without base), 765 x 561 x 268 mm (with base)Color:Black
2-in-1 laser engraving machine xTool F2 UltraThe xTool F2 Ultra is the world's first laser engraving machine to feature a dual MOPA (Master Oscillator Power Amplifier, a technology that enables precise control of laser pulses) system, combining the power of a 60 Watt MOPA laser with a 40 Watt diode. This revolutionary design makes the device ideal for a wide variety of materials - from stainless steel and aluminum, to silver, plastic and wood, to leather, glass, stone, rubber and more. With advanced artificial intelligence and dual 48 MP cameras, the product automatically recognizes plastics and optimizes settings to increase precision. In addition, speeds of up to 15,000 mm/s and a 220 x 220 mm work area ensure maximum efficiency.Revolutionary technology - dual MOPA systemA 60 W MOPA laser combined with a 40 W diode laser creates unprecedented material processing capabilities. Among other things, it allows engraving, creating colorful patterns, 3D embossing and cutting in various types of metals. The system also enables holographic engraving on stainless steel and titanium in more than 100 consistent colors, covering 7 color spectra. With this technology, you can easily achieve amazing visual effects - a great option for crafters, craft business owners, jewelry makers and more!AI-powered laser engraving machineThe F2 Ultra is the first MOPA laser that uses AI (Artificial Intelligence, artificial intelligence) to automatically detect materials and apply optimal settings without manual setup. Dual 48 MP cameras increase positioning accuracy to 0.2 mm and improve precision by 60% over single-camera systems.Maximum productivity with ultra-fast engravingEngraving speeds of up to 15,000 mm/s make the F2 Ultra one of the fastest machines in its class. A 40 x 40 mm brass coin will be engraved in just about 3 minutes and 19 seconds, while a 100 x 30 mm metal statuette will be engraved in just about 23 seconds. Such high speed means you can perform your daily tasks even more efficiently - whether as a hobby or for work.Larger work area opens up new possibilitiesThe 220 x 220 mm work area provides significantly more space than standard solutions. Plenty of working space allows you to complete larger projects without compromising on precision - from small jewelry pieces to large cutting boards, coasters or decorations. Also available as an option is the Auto Streamline™ feeder, which expands the area to approximately 220 x 500 mm, providing additional capabilities - useful, for example, during mass production and bulk orders.Innovative 3D Curve™ engraving and cylindrical machiningThe exclusive xTool 3D Curve technology automatically creates 3D models for curved surfaces, enabling seamless engraving of designs on irregular shapes. In addition, the RA2 Pro is the world's first 4-in-1 rotary system (sold separately) to support 90% of cylindrical engraving, supporting 4 forms of rotation tailored to shapes such as rings, Christmas baubles and mugs, for example.Safety at the highest levelA stable extraction system effectively removes smoke and dust during engraving, maintaining a clean and safe working environment. A fully enclosed cover effectively blocks harmful light from both the 455nm diode laser and the MOPA laser, and an emergency stop button and fire safety alarm with automatic stop further enhance safety.xTool software ecosystemThe advanced yet user-friendly xTool Creative Space (xcs) software greatly simplifies the engraving process. A library of more than 300 materials allows for test-free setup, and intelligent path planning increases productivity by up to 300%. Simultaneous operation of several devices is also possible. In addition, the Atomm platform offers more than 5,000 ready-made design ideas with detailed instructions, and the Almake system creates various designs in as many as 10 available styles based on user prompts.IncludedxTool F2 Ultra laser engraving machineTouchscreen controllerTubePower supplyPower cableUSB cableKeyRibbed panelL-shaped positioning elementDust-free clothScrewdriverMaterial packageQuick reference guideSafety instructions ManufacturerxToolModelP1010155Laser type40 Watt diode + 60 Watt MOPA laserOperation modeLaser engraving, laser cuttingSupported materialsFor laser cutting:Laser diode: paper, wood, leather, MDF, felt, some dark opaque acrylics;MOPA laser: brass, stainless steel, aluminum;For laser engraving:Laser diode: paper, wood, leather, MDF, stainless steel, some dark opaque acrylics, bamboo, fabric, dark glass, ceramic, jade, marble, slate, cement, brick, coated metal, painted metal;MOPA laser: stainless steel, aluminum, brass, silver, plastic, platinum, titanium, goldWorking areaApprox. 220 x 220 mm (8.6" × 8.6"); Approx. 220 x 500 mm (8.6" × 19.6") with optional feederMax. operating speed590.55 ips (15,000 mm/s)Max. thickness of laser cutting (linden)23 mm (0.91") in multiple passesMax. thickness of laser cutting (acrylic)20 mm (0.79") in multiple passesMax. processing height150 mmMax. diameter of rotary engraving150 mmSupported softwarexTool Creative Space / AtommmOperating systemWindows / macOSConnection methodUSB / Wi-Fi / IPSupported filesSVG / DXF / JPG / JPEG / PNG / BMP / TIFAlmake compatibilityYesPre-assembledYesBuilt-in camera48 MP, dualPositioning methodCamera positioningFocusing modeAutofocusMetering systemNot applicableViewing methodIntelligent camera viewingLaser spot size0.09 x 0.1 mm (40 W diode laser); 0.03 x 0.03 mm (60 W MOPA laser);Positioning precision0.2 mmMeasurement precision0.2 mm, cameraImage resolutionNot applicableMotion accuracy0.00482 mmSafety certificationLaser Class 4Product dimensions294 x 429 x 521 mm (11.57" × 16.88" × 20.51")WeightF2 Ultra: 21.6 kgMax input power of the device400 WInput voltage of the power supply100 V - 240 V, AC 50/60 Hz
Dual Monitor DisplayPort™ 1.2 KVM3.5mm speaker and microphone connectionsDesigned for use with Dual DisplayPort systemsSupports 4K UHD resolutions up to 3840 x 21602-Port USB 2.0 hub for storage devices and printersRequired cabling (TK-CP06) sold separatelyNo CD installation requiredTRENDnet’s 2-Port Dual Monitor DisplayPort KVM Switch, model TK-240DP, allows you to control two computers with one set of console controls. Experience up to 4K UHD resolutions, no driver installation required. The TK-240DP is designed for dual monitor systems with USB mouse and keyboard connections, and features a two-port USB hub to share storage devices or printers between computers.DisplayPort MonitorDesigned to connect to two DisplayPort monitors4K UHD ResolutionSupports resolutions up to 4K UHD (3840 x 2160)USB 2.0 HubTwo additional USB ports to connect storage drives and printers ComputersControl up to 2 computers4K UHDSupports resolutions up to 4K UHD (3840 x 2160)Audio SupportFull audio support maximizes work station productivityUSB Mouse & KeyboardTrue Transparent USB (TTU) emulation technology supports most keyboard and mouse designsDisplayPort MonitorDesigned to connect to two DisplayPort monitorsHousingRugged metal enclosureUSB 2.0 HubTwo additional USB ports to connect storage drives and printersHot KeysHot Key command shortcuts
Use one keyboard, monitor, and mouse to control two computersAudio support for speakers and microphoneConsole-side hardware1 x DVI port2 x USB 2.0 Type A port1 x 3.5mm audio port1 x 3.5mm microphone portLED display for easy computer monitoringPush button switch with a 1.45 m (4.8 ft.) extension cableComputer-side hardware2 sets of 80 cm (2.6 ft.) built-in combination cables with DVI, USB, audio, and microphone portsWorks with most standard USB mouse and keyboard designsSupport video quality of up to 1920 x 1200 resolutionSupports Windows, Linux, and Mac operating systems*Hot-Plug feature: add computer or remove the connected computer for maintenance without powering down the KVM SwitchKeyboard status restored when switching between computers.Install the included KVM switcher software in order to program Hot-Keys and Auto-Scan intervalsPlug and Play with no software download requiredNo power required, this device is powered by the computer’s USB port
Control two computers with one set of console controlsWorks with displays with an HDMI portFull HD 1080p resolutionHDMI and 3.5 mm analog audioFully integrated cablingErgonomic computer toggle switchNo CD installationUSB Powered - No external power adapterTRENDnet’s 2-Port HDMI KVM Switch, model TK-215i, controls two computers (with an available HDMI port) with one set of console controls. No driver installation required, simply plug in the integrated cables to share two computers with a full HD 1080p display. The TK-215i supports HDMI and 3.5 mm analog audio and features an ergonomic computer toggle switch. Computers Control up to 2 computers1080p HD Supports full HD 1080p (progressive 1920 x 1080 pixels) with a 60 Hz refresh rate2-Way Audio Full audio support through HDMI cable connections with optional 3.5 mm microphone and speaker jacksToggle Switch Use the integrated 1.5 m (5 ft.) cable to position the toggle switch in the most ergonomic locationConsole Connectors Emulation Technology supports advanced USB keyboard and mouse designsHDMI Display HDMI 1.3 with HDCP supportComputer Ports Requires free USB and HDMI ports from connected computerIntegrated Cables All required cables are integratedSwitch Software Windows® and Mac® based KVM switch software to define hot keys and create auto-scan intervals
The 2-Port USB KVM Switch Kit lets you manage two PC’s with just one set of keyboard, monitor, and mouse. Switch between two PC’s with a simple press of a button! Separate sets of KVM cables are included with the KVM Switch, so users can start controlling 2 PC’s instantly. The KVM cables also provide power to the KVM Switch, eliminating the need for a power adapter. Hot Key operations provide immediate access to features such as computer switching, and auto-scanning. With its Hot-Plug, and Audible Feedback, the 2-Port USB KVM Switch is the perfect choice for managing multiple PC’s.Control up to 2 computers / servers with one set of console deviceUSB keyboard / mouse emulation with 2 sets of detachable KVM cablesCompliant with Windows and LinuxHigh video quality: up to 2048 x 1536 VGA resolutionAuto-scan and LED display for computer monitoringKeyboard status restored when switching between computersComputer selection by front panel push buttons, keyboard hot key commands or Windows-based client switching software*User definable hot key (Windows only)USB interface power methodPlug & Play and hot-pluggable2-year limited warranty* Please go to http://www.trendnet.com/support/ to download the client switching software
2-Port USB KVM Switch Kit with AudioTK-209K (Version v1.2R)2-port KVM switch with VGA and USB connections to computers and audio devicesListen to music from one computer while working on the otherHigh quality 2048x1536 resolution for a crisp displaySupports most operating systems and advance mouse designsAll required cabling includedThe 2-Port USB Audio KVM Switch lets you control multimedia PCs with just one keyboard, monitor, mouse, microphone, and a set of speakers. The KVM switch not only allows you to share your monitor, keyboard and mouse but you can also share microphone and speakers. With just a simple press of a button, this KVM switch eliminates the hassle of cable swapping and switching between 2 PCs. With it's Hot-Plug, Auto-Scan and Hot-Key operating features, the TK-209K is the perfect choice for managing 2 PCs. Separate KVM cables are included.Control up to 2 computers/servers with one set of console deviceUSB keyboard/mouse emulation with 2 sets of detachable KVM cablesCompliant with Windows and LinuxHigh video quality, up to 2048 x 1536 VGA resolutionListen to music from one computer while working on the otherAuto-Scan & LED display for computer monitoringComputer selection by face panel push buttons, keyboard hot key commands or Windows-based client switching software*User definable hot key (Windows only)Plug & Play and hot-pluggableUSB interface power method2-year limited warranty
Tootekood: PU919BGTIN: 5905316147645Adventure Camera accessories
Puluz PU919B dual slot charger for GoPro Hero 12 / Hero 11 / Hero 10 / Hero 9.Puluz PU919B is a two-slot charger designed to charge GoPro AHDBT-901 battery pack, which is suitable for GoPro Hero 12, Hero 11 Black, Hero 10 Black, Hero 9 Black cameras. Thanks to its design, with the PU919B you can charge two batteries at the same time, so you can use the saved time to edit videos or relax. The charger has an illuminated battery status indicator, so you'll know right away when it's ready for use. You can use the device with either a USB-C cable or a micro USB cable, which is included in the kit - both of which will work great both at home and on the go.Easy control of charging statusThe Puluz PU919B is equipped with an illuminated battery status indicator, so you'll always know when the batteries are ready for use. This simple but useful addition avoids unnecessary waiting. The charger is designed for efficient charging, ensuring that your batteries are fully prepared for your next recording session.Versatile and convenient charging optionsThe Puluz PU919B charger offers flexibility in terms of charging options. You can use either a USB-C cable or a micro USB cable - both are included. This means you can use this charger both at home and on the go, using available power sources. It's ideal for people who travel frequently and need an efficient way to keep their batteries ready.Exceptional performance and compatibilityThe Puluz PU919B charger provides an output voltage of 4.4V and an output current of 800mA, which guarantees efficient and safe charging of GoPro batteries. Compatibility with the HERO 9, HERO 10, HERO 11 and HERO 12 makes the charger a great addition to the kit for filming and photography enthusiasts who own these GoPro cameras.Kit contentsChargerMicro USB cableBrandPuluzModelPU919BColorBlackDimensions5.8 x 4.8 x 2cmInterfacesMicro USB, USB-CInput voltageMicro USB 5V/2A, USB-C 5V/2AOutput voltage4.4V 800mACompatibilityHERO 9/10/11/12
Tootekood: LIN41073GTIN: 4002888410731Video cables and adapters
Lindy's Active HDMI 18G cables combine sleek, modern design with superior performance to provide high quality, reliable HDMI transmission over long distances. Lindy's range of active cables come with an in-built chipset that amplifies the users signal to create a much longer HDMI transmission that isn't possible with standard passive HDMI cables, while also avoiding the need for additional expensive extenders or repeaters.With the active chipset built discreetly into the stylishly designed head shell, these cables can easily be installed through conduit or tighter spaces. These premium cables also support the full 18G HDMI bandwidth to display 4096 x 2160 @ 60 Hz resolutions with additional support for the REC.2020 color space that covers the wider color gamut required for high-dynamic range content, for enhanced contrast and more lifelike color. Complying to the HDMI cable specification, these cables are ideal for use with a variety of source devices including set-top boxes, HDMI media players or PCs when connected to modern displays or projectors. Perfect for use in eye-catching retail displays, informational digital signage or immersive video playback in sports bars, music venues or high-end home cinemas.With support for a range of multi-channel audio formats, including Dolby True HD and DTS-HD Master Audio, these cables also ensure an impressive three-dimensional surround sound performance when connected to an amplifier's speaker system. CEC functionality also allows many of the source device's settings to be controlled via the display or projectors controls to provide a simple and effective control solution, while avoiding the necessity for several remote controls. Lindy's active cables should be connected in accordance with the instructions for the optimum experience. The connector marked "display" must be connected to the monitor or screen.
Tootekood: MG10ACA20TEGTIN: 4260557512487Hard Disk Drives(HDD)
The MG10 Series features Toshiba’s fourth-generation, 10-disk Helium-sealed design to advance Conventional Magnetic Recording (CMR) density to 2TB per disk, achieving a total capacity up to 20TB.The industry-standard 3.5-inch form-factor provides 7200rpm performance, and integrates easily into cloud-scale storage infrastructure, business-critical servers and storage, and File and Object storage solutions. The massive 20TB CMR capacity is delivered using Toshiba’s innovative Flux Control Microwave Assisted Magnetic Recording (FC-MAMR™) technology. These advances help the MG10 Series to achieve optimum storage capacity and application compatibility, with unsurpassed data reliability. Available with a SATA 6.0Gbit/s interface, the MG10 Series models integrate easily into standard 3.5-inch drive bays to help reduce the footprint and operational burden of cloud-scale storage infrastructure, File and Object storage systems, and business critical servers and storage systems.
20W Magnetic PowerBank 10000mAh Joyroom JR-W050 (white)Looking for a versatile powerbank that can accompany you almost anywhere? Joyroom JR-W050 will be an excellent choice! It is extremely lightweight and compact with a capacity of 10,000 mAh. It is equipped with 2 ports (USB-A and USB-C), and also allows wireless charging. So you can use it to charge up to 3 devices simultaneously! It is also distinguished by a special stand / ring type holder.Large capacity - fast chargingThe capacity of the powerbank is 10,000 mAh - enough to use it even several times before you need to plug it in. The JR-W050 also supports standards such as PD3.0, QC3.0 and AFC. So you can charge your devices of choice in no time! What's more, the output power of the powerbank in the case of inductive charging reaches a maximum of 15W.Charge 3 devices simultaneouslyNeed to charge more devices? Or maybe you want to share the powerbank with another person? No problem - the device supports inductive charging, in addition to offering 2 ports - USB-A and USB-C. Thanks to this, it allows you to charge up to 3 devices at the same time! With Joyroom, no one has to wait for their turn.Convenience and securityYou no longer have to wonder when to plug in the powerbank for charging. The JR-W050 is equipped with special LED indicators that will allow you to check the status of its battery at any time. The device also ensures the safety of use - it has a built-in smart chip and is protected against overcharging, overvoltage and overheating, among other things.Lightweight and compactThe powerbank's great capabilities go hand in hand with its lightweight, portable design. The device weighs only about 213 g and is extremely compact - it fits easily in the palm of your hand. It won't even obstruct your smartphone's cameras during inductive charging - so you're free to take photos or videos at any time. This handy powerbank is perfect for traveling - you can easily fit it in your bag or backpack!Convenient use of your phoneThe powerbank will allow you to conveniently use your smartphone while charging wirelessly. It is equipped with high-quality magnets, which are distinguished by their high attracting power. Thanks to this, you don't have to worry that the phone placed on it will fall and be damaged! The device also offers a special ring-type holder, which will work great as a stand. Just place it on your desk and comfortably watch a movie!BrandJoyroomModelJR-W050ColorWhiteCapacity10,000 mAh 3.85 V (38.5 Wh)Rated capacity6000 mAh (5 V - 3 A)Efficiency≥ 80%USB-C input5 V - 3 A, 9 V - 2 A, 12 V - 1.5 AUSB-C output5 V - 2.4 A, 9 V - 2.22 A, 12 V - 1.67 AUSB-A output5 V - 3 A, 9 V - 2 A, 12 V - 1.5 AWireless charging5 W / 7.5 W / 10 W / 15 WTotal output current5 V - 3 A (max)MaterialPC + ABSDimensions105 x 60.5 x 23.5 mmWeight213 g
Tootekood: ST22000NM001EGTIN: 8719706428095Hard Disk Drives(HDD)
Powerful performance with proven technology—Seagate’s ® Exos® X22 drives are built off the platform that’s shipped millions globally and deployed in leading cloud service provider solutions—making them the most sought-after drives in our datasphere. Designed with the highest rack-space efficiency and protected with Seagate Secure™, Exos X22 offers extreme market-leading capacity, earning customer confidence by delivering trusted peace of mind.
WD Elements desktop storage with USB 3.0 offers reliable, high-capacity, add-on storage, and universal connectivity with USB 3.0 and USB 2.0 devices. • High capacity in a simple and compact design • Improve PC performance • USB 3.0 ready
