Arvutitark OÜ

Showcase case made of carbon, developed for custom water cooling, includes distro plate, side panels made of smoked glass, for 2x 360 mm radiators

Black aluminum heatsink compatible with Alphacool D-RAM modules, with RGB lighting

Silver aluminum heatsink compatible with Alphacool D-RAM modules, with RGB lighting

Showcase case made of carbon, developed for custom water cooling, side panels made of smoked glass, for 2x 360 mm radiators

The Apex Soft are Alphacool's high-end solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Apex Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance. Better than standard thermal pads? The material of the Apex Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Apex Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component. But that is not the only advantage! The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Apex Soft thermal pads. They can be used for a much longer period of time without significantly losing performance. Cutting to size? No problem! When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray. The Alphacool Apex Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads. Technical data L x W x H 100 x 100 x 1 mm Colour grey Specific Gravitiy ASTM D792 3,4 g/cc Thermal Conductivity ASTM D5470 11.0 W/mK Hardness ASTM 2240 72 Shore OO Useful Temperature -40 to +150 °C Volume Resistivity ASTM D257 1.0x1011 Ohm-m Dielectric Constant ASTM D150 7,2 MHz Dielectric Breakdown Voltage ASTM D149 14 kV/mm Flame Rating UL 94 V-0 Weight 40 g Download Datasheet PDF: Alphacool Apex Soft Thermal Pad 11W/mk 100x100x1mm

The Apex Soft are Alphacool's high-end solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Apex Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance. Better than standard thermal pads? The material of the Apex Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Apex Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component. But that is not the only advantage! The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Apex Soft thermal pads. They can be used for a much longer period of time without significantly losing performance. Cutting to size? No problem! When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray. The Alphacool Apex Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads. Technical data L x W x H 120 x 20 x 1 mm Colour Grey Specific Gravitiy ASTM D792 3,4 g/cc Thermal Conductivity ASTM D5470 11.0 W/mK Hardness ASTM 2240 72 Shore OO Useful Temperature -40 to +150 °C Volume Resistivity ASTM D257 1.0x1011 Ohm-m Dielectric Constant ASTM D150 7,2 MHz Dielectric Breakdown Voltage ASTM D149 14 kV/mm Flame Rating UL 94 V-0 Weight 20 g Download Datasheet PDF: Alphacool Apex Soft Thermal Pad 11W/mk 2x 120x20x1mm

The Apex Soft thermal pads are Alphacool’s high-end solution in the field of thermal interface materials. Thanks to their outstanding properties, they can almost be compared to thermal paste. Apex Soft thermal pads conform much better to components, resulting in a significant improvement in cooling performance.The material used in Apex Soft pads behaves similarly to thermal paste. Its consistency prevents higher-standing components, such as voltage regulators or VRAMs, from being subjected to excessive mounting pressure from the cooler — which, in the worst case, could lead to PCB bending. Apex Soft pads fill surface irregularities more effectively and conform more closely to component shapes, which significantly enhances thermal transfer between the cooler and the hardware.The special material also does not dry out over time. Standard thermal pads often begin to bleed silicone over time, making them hard and drastically reducing their performance. This is not the case with Apex Soft pads. They can be used for much longer periods without a noticeable drop in performance.When cutting the pads to size, it’s important to leave the protective film on. This allows the pads to be easily cut with scissors — just like cutting paper. The cut edges remain clean and do not fray.Alphacool’s Apex Soft thermal pads offer significantly better performance than conventional thermal pads in many aspects and are the perfect replacement for old or underperforming pads. Technical data thermal padDimensions (L x W x H)100 x 100 x 1,0mmSpecific gravity (ASTM D792)3.2 g/ccThermal Conductivity14.0 W/mKHardness (ASTM D2240)80 Shore OOWorking temperature-40 to +150 °CVolume Resistance (ASTM D257)1.0x10^11 Ohm-mDielectric Breakdown Voltage (ASTM D150)6.8 MHzDensity (ASTM D792)3.6 g/cm³ (±10%)Dielectric breakdown (ASTM D149)13 kV/mmFlame Rating (UL 94)V-0Colorgrey

The Apex Soft are Alphacool's high-end solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Apex Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance. Better than standard thermal pads? The material of the Apex Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Apex Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component. But that is not the only advantage! The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Apex Soft thermal pads. They can be used for a much longer period of time without significantly losing performance. Cutting to size? No problem! When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray. The Alphacool Apex Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads. Technical data L x W x H 120 x 20 x 1 mm Colour Grey Specific Gravitiy ASTM D792 3,2 g/cc Thermal Conductivity ASTM D5470 14.0 W/mK Hardness ASTM 2240 80 Shore OO Useful Temperature -40 to +150 °C Volume Resistivity ASTM D257 1.0x1011 Ohm-m Dielectric Constant ASTM D150 6,8 MHz Dielectric Breakdown Voltage ASTM D149 13 kV/mm Flame Rating UL 94 V-0 Weight 20 g Download Datasheet PDF: Alphacool Apex Soft Thermal Pad 14W/mk 2x 120x20x1mm

Case fan, completely metal housing, 120-millimeter format, PWM-controlled, 0-3,000 RPM, 117.21 m³/h airflow

Case fan, all-metal housing, 120-millimeter format, PWM-controlled, 0-2,000 RPM, 78.02 m³/h airflow

Case fan, full metal housing, 120 millimeter format, PWM-controlled, 0-2,000 RPM, 78.02 m³/h airflow

Case fan, full metal housing, 120-millimeter size, PWM-controlled, 0-2,000 RPM, 78.02 m³/h airflow

Case fan, all-metal housing, 120-millimeter format, PWM-controlled, 0-2,000 RPM, 78.02 m³/h airflow

Case fan, all-metal housing, 120-millimeter format, PWM-controlled, 0-3,000 RPM, 117.21 m³/h airflow

Case fan, full metal housing, 120-millimeter size, PWM-controlled, 0-3,000 RPM, 117.21 m³/h airflow

Alphacool Apex Stealth Metal Aurora Fan – Chrome (2600 rpm): Luxurious Aesthetics Meet Extreme Cooling Performance The Apex Stealth Metal Aurora Fan in Chrome is the ultimate choice for those who want to combine maximum performance with a luxurious, reflective aesthetic in their custom liquid cooling loop. This high-end 120 mm fan is engineered for the most demanding water-cooling circuits. It features a robust outer frame finished with a reflective chrome surface. This construction not only reduces vibration but also adds a unique, eye-catching accent to your PC case. Integrated digital addressable Aurora RGB lighting ensures dynamic, impressive lighting effects. Highlights: Maximum Performance (2600 rpm): Delivers extremely high static pressure and airflow, ideal for dense radiators. Chrome Metal Frame: Reflective chrome finish on the metal frame for a luxurious, unique look inside the case. Digital Addressable RGB Lighting (Aurora): Provides vibrant, customizable lighting effects that can be perfectly synchronized with other components. Durability: Equipped with a high-quality bearing for a long lifespan and maximum reliability. Vibration Damping: The metal frame effectively reduces vibrations for quieter operation. Technical Specifications: Dimensions: 120 x 120 x 25 mm Speed: Up to 2600 rpm (PWM controlled) Lighting: Digital RGB (Aurora, 3-Pin) Frame Material: Metal (Chrome finished) Color: Chrome (Mirror finish) The Apex Stealth Metal Aurora Fan in Chrome is the ultimate choice when you want to combine the highest cooling performance with an unmissable, glossy aesthetic.

Alphacool Apex Stealth Metal Aurora Fan – Matte Black (2600 rpm): Extreme Performance in a Stealth Design The Apex Stealth Metal Aurora Fan is the flagship of Alphacool's fan series, combining high-end performance with a unique, robust matte black design. This 120 mm fan is engineered for demanding custom liquid cooling loops that require maximum cooling power without compromising aesthetics. The innovative design features a matte black metal frame that not only reduces vibration but also provides a striking, understated premium look. Integrated digital addressable Aurora RGB lighting stylishly accentuates your system. Highlights: Maximum Performance (2600 rpm): Delivers extremely high static pressure and airflow, ideal for thick radiators and intensive cooling. Metal Frame Design: Robust outer frame made of metal reduces vibration and ensures a premium, durable matte black look. Digital Addressable RGB Lighting (Aurora): Provides vibrant, customizable lighting effects that can be synchronized with your setup. Durability: Equipped with a high-quality bearing for a long lifespan and exceptional reliability. Matte Black Aesthetic: The understated, dark design is perfect for builds that prioritize a "stealth" or professional look. Technical Specifications: Dimensions: 120 x 120 x 25 mm Speed: Up to 2600 rpm (PWM controlled) Lighting: Digital RGB (Aurora, 3-Pin) Frame Material: Metal Color: Matte Black The Apex Stealth Metal Aurora Fan is the perfect combination of extreme cooling power, premium design, and powerful aesthetics.

Alphacool Apex Stealth Metal Aurora Fan – White (2600 rpm): Unrivaled Cooling in a Metal Aesthetic The Apex Stealth Metal Aurora Fan is the flagship of Alphacool's fan series, combining high-end performance with a unique, robust design. This 120 mm fan is engineered for demanding custom water-cooling loops that require maximum cooling power without compromising aesthetics. The innovative white design is complemented by a metal frame that not only reduces vibration but also provides a striking, high-quality look. Integrated digital addressable Aurora RGB lighting perfectly highlights your system. Highlights: Maximum Performance (2600 rpm): Delivers extremely high static pressure and airflow, ideal for thick radiators. Metal Frame Design: Robust outer frame made of metal reduces vibration and ensures a premium, durable look. Digital Addressable RGB Lighting (Aurora): Provides vibrant, customizable lighting effects that can be synchronized with your setup. Durability: Equipped with a high-quality bearing for a long lifespan and exceptional reliability. Elegant White Aesthetic: The white housing and fan blades seamlessly integrate into bright PC builds. Technical Specifications: Dimensions: 120 x 120 x 25 mm Speed: Up to 2600 rpm (PWM controlled) Lighting: Digital RGB (Aurora, 3-Pin) Frame Material: Metal Color: White The Apex Stealth Metal Aurora Fan is the perfect combination of extreme cooling power, premium design, and luminous aesthetics.

Case fan, all-metal housing, 120mm format, PWM-controlled, 0-3,000 RPM, 117.21 m³/h airflow

The Alphacool Apex Thermal Grease is intended for all users who want to achieve the optimum performance with their system. With its thermal conductivity, this electrically non-conductive heat-conducting paste, which is suitable for high contact pressures, is clearly the favorite when performance and easy processing are required.ApplicationApex Thermal Grease can be optimally applied due to its high viscosity. For perfect application of the thermal paste, a plastic spatula (not included) or a comparable tool should be used.PropertiesAlphacool's Apex Thermal Grease has an extremely high thermal conductivity, making it one of the best performing thermal pastes on the market. Only liquid metal thermal pastes offer better thermal conductivity. The Apex Thermal Grease is delivered in a 100g container with screw cap. The amount of thermal paste is sufficient for several applications and can be stored in the container protected from drying out. In addition, Apex Thermal Grease is non-conductive and non-caustic. If a small amount of paste is spilled during application, damage to the hardware is highly unlikely.Range of usesAlphacool's high-performance thermal paste can be used to cool electronic components of all kinds. In addition to CPUs and graphics cards, the components of Playstation and Xbox game consoles can also be cooled and thus significantly improved in their performance and durability. Technical dataVolatilization Rate (24H@200°C)%less than 0.5Density (g/cc)3.2 (Test method ASTM D792)Viscosity (mPa.s)150~200*10³ (Test method ASTM D2196)Continuous Using Temperature (°C)-40°C to 120°CBreakdown Voltage (V/mil)250 (Test method ASTM D149)Thermal Impedance (°C in 2/W)0.1 +/- 0.01 (Test method ASTM D5470)Max. working pressure (psi)40ColorgrayQuantity100g

The Alphacool Apex Thermal Grease is intended for all users who want to achieve the optimum performance with their system. With a high thermal conductivity, this electrically non-conductive thermal paste suitable for high contact pressures is clearly the favorite when performance and ease of application are required.ApplicationApex Thermal Grease can be optimally applied due to its high viscosity. For perfect application of the thermal paste, a plastic spatula (not included) or a comparable tool should be used.PropertiesAlphacool's Apex Thermal Grease has an extremely high thermal conductivity, making it one of the best performing thermal pastes on the market. Only liquid metal thermal pastes offer better thermal conductivity. The Apex Thermal Grease is delivered in a 1g applicator with screw cap. The Apex Thermal Grease is non-conductive and non-caustic. If a small amount of paste is spilled during application, damage to the hardware is highly unlikely.Range of usesAlphacool's high-performance thermal paste can be used to cool electronic components of all kinds. In addition to CPUs and graphics cards, the components of Playstation and Xbox game consoles can also be cooled and thus significantly improved in their performance and durability. Technical dataVolatilization Rate (24H@200°C)%less than 0.5Density (g/cc)3.2 (Test method ASTM D792)Viscosity (mPa.s)150~200*10³ (Test method ASTM D2196)Continuous Using Temperature (°C)-40°C to 120°CBreakdown Voltage (V/mil)250 (Test method ASTM D149)Thermal Impedance (°C in 2/W)0.1 +/- 0.01 (Test method ASTM D5470)Max. working pressure (psi)40Quantity1gColorgray

The Alphacool Apex Thermal Grease is intended for all users who want to achieve the optimum performance with their system. With a high thermal conductivity, this electrically non-conductive thermal paste suitable for high contact pressures is clearly the favorite when performance and ease of application are required.ApplicationApex Thermal Grease can be optimally applied due to its high viscosity. For perfect application of the thermal paste, a plastic spatula (not included) or a comparable tool should be used.PropertiesAlphacool's Apex Thermal Grease has an extremely high thermal conductivity, making it one of the best performing thermal pastes on the market. Only liquid metal thermal pastes offer better thermal conductivity. The Apex Thermal Grease is delivered in a 20g container with screw cap. The amount of thermal paste is sufficient for several applications and can be stored in the container protected from drying out. In addition, Apex Thermal Grease is non-conductive and non-caustic. If a small amount of paste is spilled during application, damage to the hardware is highly unlikely.Range of usesAlphacool's high-performance thermal paste can be used to cool electronic components of all kinds. In addition to CPUs and graphics cards, the components of Playstation and Xbox game consoles can also be cooled and thus significantly improved in their performance and durability. Technical dataVolatilization Rate (24H@200°C)%less than 0.5Density (g/cc)3.2 (Test method ASTM D792)Viscosity (mPa.s)150~200*10³ (Test method ASTM D2196)Continuous Using Temperature (°C)-40°C to 120°CBreakdown Voltage (V/mil)250 (Test method ASTM D149)Thermal Impedance (°C in 2/W)0.1 +/- 0.01 (Test method ASTM D5470)Max. working pressure (psi)40ColorgrayQuantity20g

The Alphacool Apex Thermal Grease is intended for all users who want to achieve the optimum performance with their system. With a high thermal conductivity, this electrically non-conductive thermal paste suitable for high contact pressures is clearly the favorite when performance and ease of application are required.ApplicationApex Thermal Grease can be optimally applied due to its high viscosity. For perfect application of the thermal paste, a plastic spatula (not included) or a comparable tool should be used.PropertiesAlphacool's Apex Thermal Grease has an extremely high thermal conductivity, making it one of the best performing thermal pastes on the market. Only liquid metal thermal pastes offer better thermal conductivity. The Apex Thermal Grease is delivered in a 50g container with screw cap. The amount of thermal paste is sufficient for several applications and can be stored in the container protected from drying out. In addition, Apex Thermal Grease is non-conductive and non-caustic. If a small amount of paste is spilled during application, damage to the hardware is highly unlikely.Range of usesAlphacool's high-performance thermal paste can be used to cool electronic components of all kinds. In addition to CPUs and graphics cards, the components of Playstation and Xbox game consoles can also be cooled and thus significantly improved in their performance and durability. Technical dataVolatilization Rate (24H@200°C)%less than 0.5Density (g/cc)3.2 (Test method ASTM D792)Viscosity (mPa.s)150~200*10³ (Test method ASTM D2196)Continuous Using Temperature (°C)-40°C to 120°CBreakdown Voltage (V/mil)250 (Test method ASTM D149)Thermal Impedance (°C in 2/W)0.1 +/- 0.01 (Test method ASTM D5470)Max. working pressure (psi)40ColorgrayQuantity50g

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)100 x 100 x 0,5mmThermal Conductivity (ASTM D5470)16.6 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)5×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)5 KV/mm (±10%)Density (ASTM D792)3.6 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colordark grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)100 x 100 x 1,5mmThermal Conductivity (ASTM D5470)16.6 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)5×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)5 KV/mm (±10%)Density (ASTM D792)3.6 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colordark grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)100 x 100 x 1mmThermal Conductivity (ASTM D5470)16.6 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)5×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)5 KV/mm (±10%)Density (ASTM D792)3.6 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colordark grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)120 x 20 x 0,5mmThermal Conductivity (ASTM D5470)16.6 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)5×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)5 KV/mm (±10%)Density (ASTM D792)3.6 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colordark grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)120 x 20 x 1,5mmThermal Conductivity (ASTM D5470)16.6 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)5×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)5 KV/mm (±10%)Density (ASTM D792)3.6 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colordark grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)120 x 20 x 1mmThermal Conductivity (ASTM D5470)16.6 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)5×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)5 KV/mm (±10%)Density (ASTM D792)3.6 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colordark grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)100 x 100 x 0,5mmThermal Conductivity (ASTM D5470)17.8 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)6×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)4 KV/mm (±10%)Density (ASTM D792)3.5 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorlight grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)100 x 100 x 1,5mmThermal Conductivity (ASTM D5470)17.8 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)6×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)4 KV/mm (±10%)Density (ASTM D792)3.5 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorlight grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)100 x 100 x 1mmThermal Conductivity (ASTM D5470)17.8 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)6×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)4 KV/mm (±10%)Density (ASTM D792)3.5 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorlight grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)120 x 20 x 0,5mmThermal Conductivity (ASTM D5470)17.8 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)6×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)4 KV/mm (±10%)Density (ASTM D792)3.5 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorlight grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)120 x 20 x 1,5mmThermal Conductivity (ASTM D5470)17.8 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)6×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)4 KV/mm (±10%)Density (ASTM D792)3.5 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorlight grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)120 x 20 x 1mmThermal Conductivity (ASTM D5470)17.8 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)6×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)4 KV/mm (±10%)Density (ASTM D792)3.5 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorlight grey

Splitter cable for ARGB accessories (3-pin / 5 V), 30 cm long cable, connection for up to two ARGB elements, compatible with various manufacturers and motherboards.

Sleeved extension cable for 3-pin ARGB, 15 cm length, with socket and plug.

Sleeved extension cable for 3-Pin ARGB, 30 cm length, with socket and plug.

The Alphacool Y-Splitter aRGB 3-Pin to 4x 3-Pin 15cm cable in black is designed for ARGB accessories (3-Pin / 5 V). This 15 cm long cable allows you to connect up to four ARGB elements, making it ideal for customizing your PC's lighting setup. It is compatible with various manufacturers and motherboards, ensuring versatile use. With a net weight of 0.021 kg, it is a lightweight and efficient solution for your ARGB needs.

The Alphacool Aurora Flexlight RGBW-LEDs are the ideal solution for illuminating your PC, especially for modding purposes. RGBW LEDs surpass standard RGB LEDs in both color and brightness. Of course, RGBW LED strips can also be used to light up various other areas in your home, such as creating mood lighting in the living room, under-bed lighting in the bedroom, or illuminating cabinets.

Highlights super easy installation 15 RGB LEDs for perfect lighting compatible with all standard RGB controllers intended for Eisblock XPX satin or clear CPU cooler The Alphacool XPX RGB frame is intended for users of the Eisblock XPX CPU cooler who are looking for the perfect lighting for their cooler. The RGB frame simply slides over the Eisblock XPX cooler and is then connected to the RGB controller. With an impressive 15 RGB LEDs evenly distributed over the XPX Eisblock CPU cooler, perfect lighting is guaranteed. The RGB controller lets you change not only the colours, but also add colour effects like gradients, blinking, slow colour changes, and much more. Many controllers also include a dimmer function. The Alphacool XPX RGB frame leaves nothing to be desired. With the 4Pin 12V RGB plug, all Alphacool RGB products are compatible with the current RGB-sync technologies of all prominent mainboard manufacturers (ASUS, AROCK, MSI, and GIGABYTE). Technical Details Dimensions: 75 x 75 x 17mm Cable length: 40cm power connection: RGB male material: POM, soft touch surface number of LEDs: 15 controlling: RGB Controller (available separately) Scope of Delivery 1x Alphacool Aurora XPX RGB frame - black Datasheet

The Alphacool synthetic backplate for XPX, XPX Aurora, XPX Aurora Edge, XPX 1U, XPX Pro 1U, XPX Pro Aurora, Eisbaer, Eisbaer Aurora, Eisbaer Pro, Eisbaer LT is compatible with Intel's LGA 115X, 1200 and 1700 sockets. This includes solo water coolers and CPU AIOs. The backplate stabilises the CPU cooler on the socket and ensures optimum contact pressure. There is an additional adhesive surface on the back of the backplate that serves as an installation aid and thus makes mounting much easier.Compatibility:Intel: LGA 1150 / 1151 / 1155 / 1200 / 1700 Technical data L x W x H 99 x 99 x 3 mm Material synthetic Weight 29 g Color black

The Alphacool Bubble Down is a spare part for various Alphacool expansion tanks with integrated pump top. It prevents the pump from sucking air out of the expansion tank which can lead to unpleasant noises. Furthermore, a pump can also be damaged by too much sucked air.

Alphacools's fittings go new ways in looks, quality of manufacturing, colours and choice. The inner diameter of these fittings truly deserves the „high flow“ attribute! The first three colours, Chrome, Deep Black and Shiny Copper offer something for every taste. The product matching series are designed to look elegant in every system, highlighting the individual design of the computer. The limits are endless with these Alphacool fittings in combination with Alphacool tubing! With a new process during chromatising the surface finish is completely connected with the brass body, hence ensuring permanent intense colours and peeling of the chrome layer. The Alphacool name in blue lettering on some of the fittings additionally underlines the individuality of these items. Functionality of this connector:A bushing with two 1/4“ inner threads comes in handy for the extension of fittings or for connection of a component with an outer thread to a fitting. Technical specifications:Material: Brass, chromatizedColour: Deep Black Dimensions:Length: 22mmWidth: D17mm Extent of delivery:1 x Alphacool HF socket 2 x G1/4 inner thread - Deep Black This product has been reviewed for you:ModdingbaseXtremesystems (Engl.) (userreview)PT-reviews (Pt)

This kit is perfect for mounting of a Coolplex reservoir mount e.g. on the case side panel. The robust M6 screws fit perfectly: The head disappears completely in the mounting clips, the washer and nut can be screwed on from the other side for safe fixation. Extent of delivery: 2 pieces M6 hexagon socket screw 2 pieces M6 washer 2 pieces M6 nut Important: Only compatible with the black mounting clips

Replacement bottom for the Alphacool Cape Corp Coolplex expansion tank, designed for industrial applications with high pressures.Technical data:Material: POMDiameter: 50mmConnections: 3x G1/4"Scope of delivery:1x Alphacool Cape Coolplex Base POM 3 BarNote: O-ring not included!

The design has proven itself for a long time: The frosted transparent material is perfect for clear tube reservoirs and keeps the focus on the important parts. But his hard plastic used to be rather sensitive if treated incorrectly. This is now over! The new material mix is now even more sturdy and handles shearing forces much better, allowing hassle-free mounting. Technical specifications:Material: Hard plasticColour: Frosted transparentInner diameter: 50mmScrew hole size: M4 Extent of delivery:2x Alphacool Cape Coolplex Plexiglas mount, 1 piece 50mm Please note: For mounting additional screws are required. We recommend ordering Item No. 46023.

What is it? The Alphacool Cape Corp Coolplex HF Metal is the first reservoir from Alphacool which has a base and top made completely out of brass and also has the Lighttower water effect. Highlights: Base and top made of brass Lighttower water effect Three sizes and two colours Many connection options With the Alphacool Cape Corp Coolplex HF Metal, you get a reservoir in elegant brass. The base and top are both made of solid nickel-plated brass, creating a uniquely elegant look in your computer. The Cape Corp Coolplex HF Metal doesn’t get its good looks from various gimmicks, but rather from its simplicity and the materials used. And yet, the Cape Corp Coolplex HF Metal still features an optical highlight that has become virtually essential to the Alphacool Series. The Lighttower water effect is included here too. The streams of water coming sideways out of the riser pipe hit the transparent Plexiglas of the reservoir, creating a unique fountain effect that changes at every flow rate. If you’d rather not use the water effect, you can simply fill the reservoir past the riser pipe. The base has two options for connecting both the inlet and outlet – on the side of the base or directly underneath it. This gives you different options for setting up your system the way you want it. You can also pass the water into the reservoir through its top, though this setup does have some disadvantages. This setup means going without the Lighttower water effect, and of course that air will enter the cooling loop when it is switched off. The included clip-on brackets make installation a cinch. The brackets are simply screwed in at the desired place with an M4 screw. If your case doesn’t have holes in the right places, you can simply drill those in. The reservoir just needs to be clipped on. When the Cape Corp Coolplex HF Metal is at the desired height, the clips can be fastened to hold the reservoir in place. It doesn’t get any easier than that. The Alphacool Cape Corp Coolplex HF Metal is available in Chrome and Deep Black versions. Alphacool also carries three different sizes. From the extremely compact Metal 10 to the medium Metal 15 up to the expansive Metal 25, you choose the right version to fit your unique system. Technical Details Dimensions: 49 x 49 x 117mm Material: brass, acryl glass Threads: 5x GI/4" Mounting: 2x universal mountClip-On Color: chrome Capacity: 80ml Scope of Delivery 1x Alphacool Cape Corp Coolplex HF metall 10 - chrome Brackets 2x Sealing plugs 3x Mounting material Manual Datasheet Download 3D-file (.stp)

The Alphacool Cape Coolplex reservoirs have been well-known and popular on the water cooling market for years!But even such great products can sometimes use an update to fulfill even the most recent demands. Hence we at Alphacool have let the old series run out and now introduce the new series with POM end pieces as “LT” and now even with solid metal end pieces as the “Copper Edition”. Of course the tubes are made from high-grade Plexiglas which has proven itself with safe operation in many cooling systems for many years!The changes made are subtle but very well thought through:Besides the new materials and surface finishes the top piece of the reservoirs is now equipped with an additional thread, making them great for installation of a Fillport. Additionally the reservoir can now also be installed horizontally! The riser tube is now removable for applications where the top of the reservoir is used as an inlet.A nice side effect: Now even more lighting modules can be installed for beautiful lighting effects.To round off the new concept the screw plugs on all versions now have an elegant polished copper surface finish!For maximum compatibility all threads are G1/4” in size. The proven transparent mounts are now also included again for almost invisible mounting. Make your PC a piece of art with the new Cape Coolplex reservoirs! Technical specifications: Material: POM, PlexiHeight: 100mmDiameter: 50mmConnection threads: G1/4"Weight: 264gExtent of delivery:Reservoir2x Mounting clamps 2 x G ¼" Screw plugsPlease note: For mounting additional screws are needed. We recommend ordering item No. 46023 with this reservoir. This product has been reviewed for you:HardwareoverclockOcreviews (PT)

The Alphacool Cape Coolplex reservoirs have been well-known and popular on the water cooling market for years!But even such great products can sometimes use an update to fulfill even the most recent demands. Hence we at Alphacool have let the old series run out and now introduce the new series with POM end pieces as “LT” and now even with solid metal end pieces as the “Copper Edition”. Of course the tubes are made from high-grade Plexiglas which has proven itself with safe operation in many cooling systems for many years!The changes made are subtle but very well thought through:Besides the new materials and surface finishes the top piece of the reservoirs is now equipped with an additional thread, making them great for installation of a Fillport. Additionally the reservoir can now also be installed horizontally! The riser tube is now removable for applications where the top of the reservoir is used as an inlet.A nice side effect: Now even more lighting modules can be installed for beautiful lighting effects.To round off the new concept the screw plugs on all versions now have an elegant polished copper surface finish!For maximum compatibility all threads are G1/4” in size. The proven transparent mounts are now also included again for almost invisible mounting. Make your PC a piece of art with the new Cape Coolplex reservoirs! Technical specifications: Material: POM, PlexiHeight: 250mmDiameter: 50mmConnection threads: G1/4"Weight: 442gExtent of delivery:Reservoir2x Mounting clamps 2 x G ¼" Screw plugsPlease note: For mounting additional screws are needed. We recommend ordering item No. 46023 with this reservoir. This product has been reviewed for you:FreeocenHardwareoverclock