Arvutitark OÜ

The Alphacool Eisbaer Pro Aurora CPU AIO water cooler is a special development for processors with particularly large CPU dies. These include the AMD Threadripper and Epyc processors and the Intel CPUs for the LGA 3647 and LGA 4189 socket.Large cooling surfaceThe cold plate bottom covers the entire surface of the respective processors. The area of the cooling fins exceeds all known processor cores with an area of around 55 x 42 mm. This ensures that all hotspots of a CPU are directly covered and thus optimally cooled. The cooling fins are 0.4 mm thick and also have an optimal distance of 0.4 mm between them. In total there are 58 cooling fins on the bottom of the cooler. The bottom of the cooler is only 3 mm thick, which allows the heat to reach the water and be dissipated as quickly as possible.Copper radiatorAs per usual with Alphacool, the radiators are made of copper. Alphacool is the first manufacturer worldwide to use copper for all water bearing components such as the antechambers, the cooling fins and the cooling channels to which the fins are soldered. The connection threads are made of brass for strength reasons. In addition, the cooling fins are only lightly painted. On closer inspection the copper shimmers through a little. A thick lacquer coating would result in a reduction of the cooling capacity. The fin density is at optimal 15FPI. Therefore the radiator works perfectly even at low airflow. A too high fin density would require fans with higher speed to achieve the same cooling capacity. A lower fin density would no longer benefit from fast rotating fans. So the golden mean was chosen.Real water coolingThe Eisbaer Pro Aurora consists almost entirely of actual water cooling components. The extremely robust and durable TPV hoses are used in the enterprise products for servers and workstations. The hose connections also come from the Enterprise series from Alphacool and use the standard G1/4". This makes the Eisbaer Pro Aurora fully compatible with all common water cooling products. The quick-release fastener allows easy expansion of the AIO with additional components. The most important of these are the prefilled radiators and the Eiswolf GPU AIO water cooling system.Fan and lightingThe entire Eisbaer Aurora Pro cooler is equipped with addressable digital RGB LEDs. This gives a real eye-catcher in the Case. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. Inaddition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. Of courseall Digital RGB LEDs can be controlled at will. Depending on the controller almost all effects are possible.How to connect everythingThe fans are normally controlled via a 4-pin PWM connector. An included Y-adapter for the fans makes it easy to connect them to the mainboard. This allows all fans to be controlled and regulated via one connector. Each fan has a 3-pin JST connector including Y-adapter for the LED illumination. This allows the fans to be connected directly together and can also be controlled simultaneously via a controller. For the connection to a typical 3-pin 5V connector a corresponding adapter is included. Alternatively, the included Digital RGB controller can be used. The pump of the Eisbaer Aurora uses a 3-pin Molex connector. This can also be connected to the mainboard.The Eisbaer Pro Aurora is a true multi-talent. Expandable, fully compatible with DIY water cooling components and it is the optimal solution for the most powerful processors on the market.With the Alphacool LGA 4677 Mounting Bracket (article no.: 13764), this cooler is also compatible with the Intel socket LGA 4677. Compatibility:AMD: AM4 / AM5 / SP3 / SP6 / sTR5 / sWRX8 / TR4Intel: LGA 1700 / LGA 1851 / LGA 2011 / LGA 2011-3 / LGA 2066 / LGA 3647 / LGA 4189 (optional) / LGA 4677 (optional) Technical data radiatorL x W x H390 x 120 x 30 mm (+/- 3% in the range of the pre-chambers)Material cooling finscopperMaterial chamberscopperMaterial cooling channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads2x G1/4"For fan size120 mmFan mounting options3 x one-sided / 6 x both-sidedTechnical data cooler and pumpL x W x H64 x 79 x 54,3 mmMaterial cooler bottomNickel plated copperMaterial cooler topPMMAThreads2 x G1/4“ (+ 1x Fillport G1/4“)Pump typDC-LT 2Pump speed2600 rpm (+/- 10%)Head of delivery1 mMaximum flow rate72 L/hVoltage6-13,5V DCPower consumption3,2WMTBF50.000 hNumber of aRGB Digital LED10Technical data tubeLength40 cmMaterial tubeTPV (EPDM/PP)Colorblack mattTube size12,7 / 7,6 mmHardness grade35 Shore-A to 50 Shore-DWorking temperature-50 to +155 °CTechnical data fittingsL x D straight fitting24 x 18 mmQuantity straight fittings4xFor tube size12,7 / 7,6 mmMaterial fittingsnylonTechnical data quick fastenersL x D95 x 27 mmMaterialnylonFor tube size12,7 / 7,6 mmColorblackTechnical data fanSpeed0 - 2500 RPMStatic pressure3,17 mm/H2OAir flow rate119,8 m³/hBearingsSleeve bearingFan connector4-Pin PWMNumber of aRGB Digital LEDFrame: 12 / Hub: 8Connection Digital aRGB3-Pin JST + 3-Pin 5VDimensions120 x 120 x 25 mmMax working temperature60 °CWarranty: 3 years???? Warranty Terms

The Alphacool Eisbaer Pro Aurora CPU AIO water cooler is a special development for processors with particularly large CPU dies. These include the AMD Threadripper and Epyc processors and the Intel CPUs for the LGA 3647 and LGA 4189 socket.Large cooling surfaceThe cold plate bottom covers the entire surface of the respective processors. The area of the cooling fins exceeds all known processor cores with an area of around 55 x 42 mm. This ensures that all hotspots of a CPU are directly covered and thus optimally cooled. The cooling fins are 0.4 mm thick and also have an optimal distance of 0.4 mm between them. In total there are 58 cooling fins on the bottom of the cooler. The bottom of the cooler is only 3 mm thick, which allows the heat to reach the water and be dissipated as quickly as possible.Copper radiatorAs per usual with Alphacool, the radiators are made of copper. Alphacool is the first manufacturer worldwide to use copper for all water bearing components such as the antechambers, the cooling fins and the cooling channels to which the fins are soldered. The connection threads are made of brass for strength reasons. In addition, the cooling fins are only lightly painted. On closer inspection the copper shimmers through a little. A thick lacquer coating would result in a reduction of the cooling capacity. The fin density is at optimal 15FPI. Therefore the radiator works perfectly even at low airflow. A too high fin density would require fans with higher speed to achieve the same cooling capacity. A lower fin density would no longer benefit from fast rotating fans. So the golden mean was chosen.Real water coolingThe Eisbaer Pro Aurora consists almost entirely of actual water cooling components. The extremely robust and durable TPV hoses are used in the enterprise products for servers and workstations. The hose connections also come from the Enterprise series from Alphacool and use the standard G1/4". This makes the Eisbaer Pro Aurora fully compatible with all common water cooling products. The quick-release fastener allows easy expansion of the AIO with additional components. The most important of these are the prefilled radiators and the Eiswolf GPU AIO water cooling system.Fan and lightingThe entire Eisbaer Aurora Pro cooler is equipped with addressable digital RGB LEDs. This gives a real eye-catcher in the Case. The fan used is the Aurora Rise with 140mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 2.20 mm/H2O and offers a max. air flow of 154.1 m³/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. Of course all Digital RGB LEDs can be controlled at will. Depending on the controller almost all effects are possible.How to connect everythingThe fans are normally controlled via a 4-pin PWM connector. An included Y-adapter for the fans makes it easy to connect them to the mainboard. This allows all fans to be controlled and regulated via one connector. Each fan has a 3-pin JST connector including Y-adapter for the LED illumination. This allows the fans to be connected directly together and can also be controlled simultaneously via a controller. For the connection to a typical 3-pin 5V connector a corresponding adapter is included. Alternatively, the included Digital RGB controller can be used. The pump of the Eisbaer Aurora uses a 3-pin Molex connector. This can also be connected to the mainboard.The Eisbaer Pro Aurora is a true multi-talent. Expandable, fully compatible with DIY water cooling components and it is the optimal solution for the most powerful processors on the market.With the Alphacool LGA 4677 Mounting Bracket (article no.: 13764), this cooler is also compatible with the Intel socket LGA 4677. Compatibility:AMD: AM4 / AM5 / SP3 / SP6 / sTR5 / sWRX8 / TR4Intel: LGA 1700 / LGA 1851 / LGA 2011 / LGA 2011-3 / LGA 2066 / LGA 3647 / LGA 4189 (optional) / LGA 4677 (optional) Technical data radiatorL x W x H460 x 144 x 30 mm (+/- 3% in the range of the pre-chambers)Material cooling finscopperMaterial chamberscopperMaterial cooling channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads2x G1/4"For fan size140 mmFan mounting options3 x one-sided / 6 x both-sidedTechnical data cooler and pumpL x W x H64 x 79 x 54,3 mmMaterial cooler bottomNickel plated copperMaterial cooler topPMMAThreads2 x G1/4“ (+ 1x Fillport G1/4“)Pump typDC-LT 2Pump speed2600 rpm (+/- 10%)Head of delivery1 mMaximum flow rate72 L/hVoltage6-13,5V DCPower consumption3,2WMTBF50.000 hNumber of aRGB Digital LED10Technical data tubeLength40 cmMaterial tubeTPV (EPDM/PP)Colorblack mattTube size12,7 / 7,6 mmHardness grade35 Shore-A to 50 Shore-DWorking temperature-50 to +155 °CTechnical data fittingsL x D straight fitting24 x 18 mmQuantity straight fittings4xFor tube size12,7 / 7,6 mmMaterial fittingsnylonTechnical data quick fastenersL x D95 x 27 mmMaterialnylonFor tube size12,7 / 7,6 mmColorblackTechnical data fanSpeed0 - 2000 RPMStatic pressure2,20 mm H2OAir flow rate154,1 m³/hBearingsSleeve bearingFan connector4-Pin PWMNumber of aRGB Digital LEDFrame: 16 / Hub: 8Connection Digital aRGB3-Pin JST + 3-Pin 5VDimensions140 x 140 x 25 mmMax working temperature60 °CWarranty: 3 years???? Warranty Terms

CPU-Kühlblock für Wasserkühlungen, integrierte DC-LT 2-Pumpe, große Kühlfläche aus vernickeltem Kupfer

The Eisbaer Pro ES 2U 80mm Quad HPE AIO water cooling solution features an extremely powerful NexXxos 80mm Quad full copper radiator, equipped with high-throughput 80mm ES fans. All components used come from the Enterprise Solutions water cooling segment. Alphacool's Eisbaer Pro ES 2U 80mm Quad HPE AIO is a professional all-in-one water cooling solution that is easy to install and offers the performance of a pre-assembled and pre-filled custom loop.Powerful Full Copper RadiatorThe 80mm NexXxoS radiators are specifically designed for server racks and workstations. The copper cooling fins are extremely thinly coated compared to most other manufacturers. This ensures that the cooling performance is not reduced, as a thick coating acts as insulation. The fin spacing is also optimally chosen with 10 FPI. The fins are close enough together to provide enough cooling surface area, but far enough apart to not hinder the airflow. Additionally, all cooling fins are equipped with flaps to provide controlled air turbulence, allowing the flowing air to better absorb and transport heat away from the fins.Optimal CoolingThe cooler base covers the entire surface area of the respective processors. The surface area with cooling fins is larger that of all known processor DIEs, with a size of around 55 x 42mm. This ensures that all hotspots of a CPU are optimally cooled. The cooling fins are 0.4mm thick and also have an optimal spacing of 0.4mm from each other. There are a total of 58 cooling fins on the cooler base. The cooler base is only 3mm thick, allowing the heat to quickly reach the water and be removed.Reliable PumpThe Eisbaer Pro ES cooler uses the very compact and small DC-LT 2 pump. It provides enough power to include additional components such as GPU water blocks or radiators in the water loop.High-Quality TPV TubesThe hose connections come from the normal DIY segment and use a G1/4" thread. Therefore, they can be easily replaced. The TPV hose is free of plasticizers and does not deform, unlike traditional PVC hoses, even at high temperatures.With the Alphacool LGA 4677 Mounting Bracket (article no.: 13764), this cooler is also compatible with the Intel socket LGA 4677.Attention: This set is not compatible with servers in the 1U and 2U form factor. Compatibility:AMD: AM4 / AM5 / SP3 / SP6 / sTR5 / sWRX8 / TR4Intel: LGA 1700 / LGA 1851 / LGA 2011 / LGA 2011-3 / LGA 3647 / LGA 4189 / LGA 4677 (optional) Technical data cooler with pumpDimensions (L x W x H)64 x 79 x 54,3mmTube length75cmMaterial cooler bottomnickel plated copperMaterial cooler topAcrylThreads2x G1/4“ (+ 1x Fillport G1/4“)Pump typeDC-LT2Pump speed2600 rpm (+/- 10%)Head of delivery1mMaximum flow72 L/hVoltage6-13,5V DCPower consumption3,2WPressure tested0,8 BarMaximum working temperature60°CColorblackTechnical data radiatorDimensions (L x W x H)364,5 x 80 x 60mmMaterial cooling fins, prechambers & cooling channelsCopperPressure tested1,5 BarConnectorG1/4"ColorblackTechnical data fanDimensions (L x W x H)80 x 80 x 25mmAir flow130,93 m³/hRated speed range800 - 6000 rpmRPM signal transmissionYesColorblackTechnical data tubeMaterialTPV (EPDM/PP)Tube size12,7/7,6mmHardness grade35 Shore-A to 50 Shore-DMaximum working temperature-50 to +155°CColorblack

The Eisbaer Pro ES 2U 80mm Triple HPE AIO water cooling solution features an extremely powerful NexXxos 80mm Triple full copper radiator, equipped with high-throughput 80mm ES fans. All components used come from the Enterprise Solutions water cooling segment. Alphacool's Eisbaer Pro ES 2U 80mm Triple HPE AIO is a professional all-in-one water cooling solution that is easy to install and offers the performance of a pre-assembled and pre-filled custom loop.Powerful Full Copper RadiatorThe 80mm NexXxoS radiators are specifically designed for server racks and workstations. The copper cooling fins are extremely thinly coated compared to most other manufacturers. This ensures that the cooling performance is not reduced, as a thick coating acts as insulation. The fin spacing is also optimally chosen with 10 FPI. The fins are close enough together to provide enough cooling surface area, but far enough apart to not hinder the airflow. Additionally, all cooling fins are equipped with flaps to provide controlled air turbulence, allowing the flowing air to better absorb and transport heat away from the fins.Optimal CoolingThe cooler base covers the entire surface area of the respective processors. The surface area with cooling fins is larger that of all known processor DIEs, with a size of around 55 x 42mm. This ensures that all hotspots of a CPU are optimally cooled. The cooling fins are 0.4mm thick and also have an optimal spacing of 0.4mm from each other. There are a total of 58 cooling fins on the cooler base. The cooler base is only 3mm thick, allowing the heat to quickly reach the water and be removed.Reliable PumpThe Eisbaer Pro ES cooler uses the very compact and small DC-LT 2 pump. It provides enough power to include additional components such as GPU water blocks or radiators in the water loop.High-Quality TPV TubesThe hose connections come from the normal DIY segment and use a G1/4" thread. Therefore, they can be easily replaced. The TPV hose is free of plasticizers and does not deform, unlike traditional PVC hoses, even at high temperatures.With the Alphacool LGA 4677 Mounting Bracket (article no.: 13764), this cooler is also compatible with the Intel socket LGA 4677.Attention: This set is not compatible with servers in the 1U and 2U form factor. Compatibility:AMD: AM4 / AM5 / SP3 / SP6 / sTR5 / sWRX8 / TR4Intel: LGA 1700 / LGA 1851 / LGA 2011 / LGA 2011-3 / LGA 3647 / LGA 4189 / LGA 4677 (optional) Technical data cooler with pumpDimensions (L x W x H)64 x 79 x 54,3mmTube length75cmMaterial cooler bottomnickel plated copperMaterial cooler topAcrylThreads2x G1/4“ (+ 1x Fillport G1/4“)Pump typeDC-LT2Pump speed2600 rpm (+/- 10%)Head of delivery1mMaximum flow72 L/hVoltage6-13,5V DCPower consumption3,2WPressure tested0,8 BarMaximum working temperature60°CColorblackTechnical data radiatorDimensions (L x W x H)284 x 80 x 60mmMaterial cooling fins, prechambers & cooling channelsCopperPressure tested1,5 BarConnectorG1/4"ColorblackTechnical data fanDimensions (L x W x H)80 x 80 x 25mmAir flow130,93 m³/hRated speed range800 - 6000 rpmRPM signal transmissionYesColorblackTechnical data tubeMaterialTPV (EPDM/PP)Tube size12,7/7,6mmHardness grade35 Shore-A to 50 Shore-DMaximum working temperature-50 to +155°CColorblack

The Alphacool Eisball reservoir with integrated pump top presents itself in a unique way. A spherical reservoir has never been seen before and it opens countless new possibilities, especially in the field of modding. From static single colour lighting to maybe an R2D2 mod: there are really no limits to your creativity. Another special feature of this version: The pump is already pre-installed. Alphacool uses the proven Eispump D5 VPP655.Unique design and excellent lightingIn contrast to conventional reservoirs, the Alphacool Eisball has an unprecedented spherical design. The 22 digital RGB LEDs run completely around the equator of the Eisball in a chrome ring. These provide versatile lighting effects as well as your standard colours. Of course, the device comes with a Digital RGB Controller with which enables you to customize the style and lighting of your Eisball.Versatile mounting optionsDon't let yourself be limited to a single mounting option! The included adhesive mat and 2 different mounting plates gives you many mounting options: whether on the radiator, the fan slots, or a 2.5" SSD slot you’re covered. Alternatively, the proven universal Alphacool pump mounting can also be used. In combination with the VPP655, the Alphacool Eisball can even be operated upside down. But only and exclusively with the Alphacool VPP655 pump. Standard Laing D5 pumps cannot be operated upside down due to the spherical bearing.Where is the pump?The pump disappears completely inside the Eisball. It is inserted into the Eisball from below and fastened with a special pump holder. All Alphacool's own D5 style pumps such as the VPP655 and VPP755 as well as all original Laing D5 pumps are suitable for installation.Is the Eisball Silent Suitable?With the Eisball, the pump is completely inside the reservoir, and is therefore surrounded by the water. The water acts as additional noise insulation. The enclosed decouplers also reduce the transmission of vibrations to a minimum. All in all, a real Silent product!Note: The Eisball cannot be operated upside down with the VPP655 pump! Technical dataDimensions (W x D x H)117,51 x 128 x 128 mmDimensions (W x D x H) with mounting material and decouple130,01 x 128 x 128 mmNet weight510 gmax. operating temperature60 °Cmaterial Eisballtransparent nylonmaterial screw plugBrassmaterial pump holderAcetalmaterial Digital RGB ringAcetalThreadsIN 1x G1/4“ / OUT 1 x G1/4“Fillport1 x G1/4“capacity700 mlDigital RGB connector4-Pinvoltage Digital RGB5 VDCmounting: drillings Eisball feet4 x M4x10mounting plate: size of drillings8 x M3 / 4 x M4 (for decoupler)mounting plate on radiator or fans120 / 140 mm fans or radiators - 4 x M3x5pumps compatibilityVPP655/755 or Laing D5 pumpsColor Digital RGB RingchromeColortransparent

The Alphacool Eisball reservoir with integrated pump top presents itself in a unique way. A spherical reservoir has never been seen before and it opens countless new possibilities, especially in the field of modding. From static single colour lighting to maybe an R2D2 mod: there are really no limits to your creativity. Another special feature of this version: The pump is already pre-installed. Alphacool uses the proven VPP Apex PumpUnique design and excellent lightingIn contrast to conventional reservoirs, the Alphacool Eisball has an unprecedented spherical design. The 22 digital RGB LEDs run completely around the equator of the Eisball in a chrome ring. These provide versatile lighting effects as well as your standard colours. Of course, the device comes with a Digital RGB Controller with which enables you to customize the style and lighting of your Eisball.Versatile mounting optionsDon't let yourself be limited to a single mounting option! The included adhesive mat and 2 different mounting plates gives you many mounting options: whether on the radiator, the fan slots, or a 2.5" SSD slot you’re covered. Alternatively, the proven universal Alphacool pump mounting can also be used. In combination with the VPP755, the Alphacool Eisball can even be operated upside down. But only and exclusively with the Alphacool VPP755 pump. Standard Laing D5 pumps cannot be operated upside down due to the spherical bearing.Where is the pump?The pump disappears completely inside the Eisball. It is inserted into the Eisball from below and fastened with a special pump holder. All Alphacool's own D5 style pumps such as the VPP655 and VPP755 as well as all original Laing D5 pumps are suitable for installation.Is the Eisball Silent Suitable?With the Eisball, the pump is completely inside the reservoir, and is therefore surrounded by the water. The water acts as additional noise insulation. The enclosed decouplers also reduce the transmission of vibrations to a minimum. All in all, a real Silent product!Disclaimer: In combination with the VPP755, the Alphacool Eisball can even be operated upside down. But only and exclusively with the Alphacool VPP755 pump. Standard Laing D5 pumps cannot be operated upside down due to the spherical bearing. Technical dataLxWxH117,51 x 128 x 128 mmBxTxH with mounting material and decoupler130,01 x 128 x 128 mmNet weight510 gmax. operating temperature60 °Cmaterial Eisballtransparent nylonmaterial screw plugBrassmaterial pump holderAcetalmaterial Digital RGB ringAcetalcolor Eisballtransparentcolor Digital RGB RingChromeThreadsIN 1x G1/4“ / OUT 1 x G1/4“Fillport1 x G1/4“Digital RGB connector4-Pinvoltage Digital RGB5VDCcapacity700 mlmounting: drillings Eisball feet4 x M4x10mounting plate: size of drillings8 x M3 / 4 x M4 (for decoupler)mounting plate on radiator or fans120 / 140 mm fans or radiators - 4 x M3x5pumps compatibilityVPP655/755 or Laing D5 pumps

Spare ring Digital RGB LED ring for the Alphacool ice ball reservoir. The Digital RGB LED ring is simply put over the Alphacool Iceball Reservoir and connected as usual via the 3-pin JST connector.

Replacement standpipe bottom for all Alphacool Eisbecher 150. Technical Specifications Material: Plexi Dimensions: 71mm Scope of Delivery 1x Alphacool Eisbecher 150 Standpipe bottom (71mm)

Alphacool Eisbecher 250 riser tube bottom (180mm)

Replacement top for all Alphacool Plexi Eisbecher. Technical Details: Material: Plexi Thread: 1x G1/4" Scope of Delivery: Alphacool Eisbecher Plexi Top

Alphacool Eisbecher replacement plexi tube 60x105mm. You have a 150mm Eisbecher, but during installation or over time you notice that the plexi tube no longer looks as good, or it has scratches. Or maybe you have the 250mm version and would like to fit another radiator into the case but you notice the reservoir is too big, or you simply want to switch to the 150mm version. No problem! Simply remove the scratched or too-big plexi tube and screw in the new one. Done! You can simply continue using the pump socket and cap. Technical Specifications Dimensions (LxW): 105 x 60mm Colour: transparent Material: plexiglass Scope of Delivery 1x Alphacool Eisbecher Plexi Tube 60 x 105mm

Alphacool Eisbecher replacement plexi tube 60x205mm. You have a 250mm Eisbecher, but during installation or over time you notice that the plexi tube no longer looks as good, or it has scratches. Or maybe you have the 150mm version and would like to switch to the 250mm version. No problem! Simply remove the scratched or too-small plexi tube and screw in the new one. Done! You can simply continue using the pump socket and cap. Technical Specifications: Dimensions (LxW): 205 x 60mm Colour: transparent Material: plexiglass Scope of Delivery: 1x Alphacool Eisbecher Plexi Tube 60 x 205mm

The Alphacool Eisbecher Aurora glass reservoir uses a real glass tube rather than the usual plastic tube that Alphacool usually relies on. The embedded 5V digital RGB LED ring and the new design makes the reservoir look magnificent. Of course, the Lighttower water effect is used again. The mounting can be done via feet but also mounted on 120 or 140mm fan mounts or even directly to a radiator.Extensive mounting optionsThere are two basic mounting options, but these can be used in a versatile way. The Eisbecher Aurora glass reservoir has feet included so that it can be mounted to the bottom of the case, for example. However, Alphacool also includes mounting frames with which the Eisbecher Aurora can also be mounted on any 120 or 140 mm fan location. This also means you can mount directly on to radiator or fans.Digital RGB lighting12 aRGB LEDs illuminate the glass tube of the reservoir They are located in a ring at the bottom of the glass tube and are not visible from the outside. The illumination is particularly strong at the bottom and slowly decreases towards the top. In combination with the Lighttower water effect, a very special kind of illumination is achieved. Especially by the reflections in the real glass. The Digital RGB LEDs are connected, as with all Alphacool products via a 3-pin JST connector. Other Alphacool Digital RGB products can be connected directly via the Y-adapter.Lighttower water effectA special water effect is created in the Aurora Eisbecher via the riser tubes. If you do not fill the reservoir beyond the top of the riser tube, you will get a kind of fountain effect. In this case, the water is pushed out the sides of the riser tube and splashed against the glass tube. Depending on the strength of the flow of the loop, the effect is stronger or weaker. There is one riser tube with this effect at the bottom inlet and one at the top inlet.Pump?This Eisbecher Aurora glass is compatible with all original D5 Xylem/Lowara pumps and for all Alphacool VPP pumps. Compatibility:- Alphacool VPP / Laing D5 pumps Technical Data Eisbecher AuroraDimensions (L x W x H)77 x 77 x 142mmHeight incl. stand mounting bracket169mm / 188mmWeight555gIllumination5V digital addressable LED‘s (0,3A)Number of LEDs12Material housingAcetalMaterial tubeGlassMaterial framing barAluminumConnection1x G1/4“ inner thread IN / 4x G1/4“ inner thread OUTCable length40cmConnector digital aRGB3-Pin JST + 3-Pin 5VMaximum working temperature60°C

The Alphacool Eisbecher Aurora reservoir has an integrated pump top for powerful D5 pumps and comes with a VPP Apex pump. The tube of the reservoir is made of glass, the D5/VPP pump top and the lid of acetal. The combination of these two materials gives the expansion tank a magnificent appearance. The wow effect is provided by 12 digitally addressable RGB LEDs in the pump top and the Lighttower water effect inside the glass tube.Extensive mounting optionsMounting option 1:Stands are included in the scope of delivery, which, among other things, allow the expansion tank to be mounted on the bottom of the enclosure. Mounting option 2:Included in the scope of delivery are 120mm/140mm mounting frames, which can be used to mount the Eisbecher Aurora expansion tank as desired on free fan spaces, radiators or on the fans on radiators.Digitally addressable RGB lighting12 digitally addressable RGB LEDs illuminate the glass tube of the reservoir. They are mounted in a ring at the lower end of the tube in the transition to the pump top and provide brilliant illumination of the entire expansion tank. In combination with the Lighttower water effect, a very special ambience is achieved. The digital aRGB LED lighting is connected via a JST 3-pin connector and can be controlled with a digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360) or a digital RGB capable mainboard.Lighttower water effectA special water effect is created in the Eisbecher reservoir via the riser tubes. If you do not fill the reservoir beyond the top edge of the riser tube, you get a kind of fountain effect. In this case, the water is pushed out the sides of the riser tube and splashed against the glass tube. Depending on the flow of the circuit, the effect is stronger or weaker. PumpThe VPP Apex pump does without a spherical bearing and uses a ceramic shaft. The motor's coils have been moved from the inside to the outside. These changes have the effect that the pump is fundamentally more stable and smoother running, and any vibrations that arise have been significantlyreduced. Another positive side effect is that power consumption has been almost halved as a result. Compared to Alphacool's Eispumpe, the power is not supplied via a 4-pin Molex connector. Instead, the Apex VPP pump is connected to the power supply using a SATA connector. The Apex VPP pump has a 4-pin fan connector that connects to the motherboard or to an external controller. This allows you to control the speed range of the pump via PWM and read out the RPM signal. Technical dataL x W x H142 x 77 x 77mmPump compatibilityD5Capacity180 mlMaterial Pump top & coveracetalMaterial tubeglassMaterial framing baraluminiumConnection1x G1/4“ inner thread IN / 4x G1/4“ inner thread OUTMaximum working temperature60 °CPressure tested0,8 BarQuantity of digital aRGB LEDs12Power digital aRGB LEDs5VPower connector digital aRGB LEDs3-Pin JST + 3-Pin 5VWeight567 gColorblackTechnical data VPP ApexDimensions (L x W x H)65 x 65 x 41mmMaterial pumpsynthetic materialMaterial pump coveraluminiumMaterial axleceramicsConnections4-Pin PWM | SATARotational speed2500 - 4500 RPMCable lenghts4-Pin PWM - 48cm | SATA - 48cmOperating voltage8-13V DC / 14W IP32Starting voltage12V DCMaximum pumping head4,25 mMax flow340 l/hMax working temperature60 °CNet weight276 gcolorblack

The Alphacool Eisbecher Aurora glass reservoir uses a real glass tube rather than the usual plastic tube that Alphacool usually relies on. The embedded 5V digital RGB LED ring and the new design makes the reservoir look magnificent. Of course, the Lighttower water effect is used again. The mounting can be done via feet but also mounted on 120 or 140mm fan mounts or even directly to a radiator. Extensive mounting options There are two basic mounting options, but these can be used in a versatile way. The Eisbecher Aurora glass reservoir has feet included so that it can be mounted to the bottom of the case, for example. However, Alphacool also includes mounting frames with which the Eisbecher Aurora can also be mounted on any 120 or 140 mm fan location. This also means you can mount directly on to radiator or fans. Digital RGB lighting 12 aRGB LEDs illuminate the glass tube of the reservoir They are located in a ring at the bottom of the glass tube and are not visible from the outside. The illumination is particularly strong at the bottom and slowly decreases towards the top. In combination with the Lighttower water effect, a very special kind of illumination is achieved. Especially by the reflections in the real glass. The Digital RGB LEDs are connected, as with all Alphacool products via a 3-pin JST connector. Other Alphacool Digital RGB products can be connected directly via the Y-adapter. Lighttower water effect A special water effect is created in the Aurora Eisbecher via the riser tubes. If you do not fill the reservoir beyond the top of the riser tube, you will get a kind of fountain effect. In this case, the water is pushed out the sides of the riser tube and splashed against the glass tube. Depending on the strength of the flow of the loop, the effect is stronger or weaker. There is one riser tube with this effect at the bottom inlet and one at the top inlet. Pump? This Eisbecher Aurora glass is compatible with all original D5 Xylem/Lowara pumps and for all Alphacool VPP pumps. Compatibility: - Alphacool VPP / Laing D5 pumps Technical Data Eisbecher Aurora Dimensions (L x W x H) 77 x 77 x 242mm Height incl. stand mounting bracket 269mm / 288mm Weight 755g Illumination 5V digital addressable LED‘s (0,3A) Number of LEDs 12 Material housing Acetal Material tube Glass Material framing bar Aluminum Connection 1x G1/4“ inner thread IN / 4x G1/4“ inner thread OUT Cable length 40cm Connector digital aRGB 3-Pin JST + 3-Pin 5V Maximum working temperature 60°C

The Alphacool Eisbecher Aurora reservoir has an integrated pump top for powerful D5 pumps and comes with a VPP Apex pump. The tube of the reservoir is made of glass, the D5/VPP pump top and the lid of acetal. The combination of these two materials gives the expansion tank a magnificent appearance. The wow effect is provided by 12 digitally addressable RGB LEDs in the pump top and the Lighttower water effect inside the glass tube.Extensive mounting optionsMounting option 1:Stands are included in the scope of delivery, which, among other things, allow the expansion tank to be mounted on the bottom of the enclosure. Mounting option 2:Included in the scope of delivery are 120mm/140mm mounting frames, which can be used to mount the Eisbecher Aurora expansion tank as desired on free fan spaces, radiators or on the fans on radiators.Digitally addressable RGB lighting12 digitally addressable RGB LEDs illuminate the glass tube of the reservoir. They are mounted in a ring at the lower end of the tube in the transition to the pump top and provide brilliant illumination of the entire expansion tank. In combination with the Lighttower water effect, a very special ambience is achieved. The digital aRGB LED lighting is connected via a JST 3-pin connector and can be controlled with a digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360) or a digital RGB capable mainboard.Lighttower water effectA special water effect is created in the Eisbecher reservoir via the riser tubes. If you do not fill the reservoir beyond the top edge of the riser tube, you get a kind of fountain effect. In this case, the water is pushed out the sides of the riser tube and splashed against the glass tube. Depending on the flow of the circuit, the effect is stronger or weaker. The effect can be placed at the lower or upper inlet using the riser tubes included in the delivery.PumpThe VPP Apex pump does without a spherical bearing and uses a ceramic shaft. The motor's coils have been moved from the inside to the outside. These changes have the effect that the pump is fundamentally more stable and smoother running, and any vibrations that arise have been significantlyreduced. Another positive side effect is that power consumption has been almost halved as a result. Compared to Alphacool's Eispumpe, the power is not supplied via a 4-pin Molex connector. Instead, the Apex VPP pump is connected to the power supply using a SATA connector. The Apex VPP pump has a 4-pin fan connector that connects to the motherboard or to an external controller. This allows you to control the speed range of the pump via PWM and read out the RPM signal. Technical dataL x W x H242 x 77 x 77mmPump compatibilityD5Capacity360 mlMaterial Pump top & coveracetalMaterial tubeglassMaterial framing baraluminiumConnection1x G1/4“ inner thread IN / 4x G1/4“ inner thread OUTMaximum working temperature60 °CPressure tested0,8 BarQuantity of digital aRGB LEDs12Power digital aRGB LEDs5VPower connector digital aRGB LEDs3-Pin JST + 3-Pin 5VWeight765 gColorblackTechnical data VPP ApexDimensions (L x W x H)65 x 65 x 41mmMaterial pumpsynthetic materialMaterial pump coveraluminiumMaterial axleceramicsConnections4-Pin PWM | SATARotational speed2500 - 4500 RPMCable lenghts4-Pin PWM - 48cm | SATA - 48cmOperating voltage8-13V DC / 14W IP32Starting voltage12V DCMaximum pumping head4,25 mMax flow340 l/hMax working temperature60 °CNet weight276 gcolorblack

The Alphacool Aurora 180° terminal allows flexible connection options for all Eisblock GPU coolers. Perfect for extensive modding projects or for systems with limited space. The elegant design is perfected by a magnetic cover.Flexible connectionsThe Alphacool Eisblock Aurora 180° terminal replaces the standard terminal of the Eisblock GPU cooler. It positions the connections above the backplate, significantly reducing the depth of the cooling block. With three possible connection options for each input and output - top, side and rear - the terminal offers maximum flexibility.Note: Please follow the manual for the correct flow direction of the water. Technical dataDimensions (L x W x H)8.00 x 31.00 x 61.60mmMaterial (water-bearing elements)Chrome-plated brass, acetalMaterial magnetic cover (not water-bearing)AluminumThreads3x G1/4“ In | 3x G1/4“ OutPressure tested0.8 barMax working temperature60°CWeight320gColorblack, chromeWarranty: 2 years???? Warranty Terms

The Alphacool Aurora Acetal GPX-A 6800/6900(XT) Eisblock combines style with performance. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acetal GPX EisblockMore Performance!During the development of the EIsblock Aurora GPX-A 6800/6900(XT) graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance.Copper or Aluminium?Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-A 6800/6900(XT) Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling.Is There Anything Else New?The Eisblock Aurora GPX-A 6800/6900(XT) also relies on the new patented stop fittings, which sit flush with the surface of the terminal. On the front of the terminal you can see the corresponding names of the compatible graphic card types. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler.The Alphacool Aurora GPX-A 6800/6900(XT) Acetal is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation.Note:- This article is delivered with a backplate Technical data:L x W x B: 130 x 262,5 x 24,5 mmMaterial cooler: Nickle plated copperMaterial top: AcetalThickness cooling fins: 0,6 mmThreads: 4x G1/4“ Graphics Card Configurator: Click here!List of Compatibility: AMD graphic cardsCompatibility list:- AMD Radeon 6800 Reference Design- AMD Radeon 6800 XT Reference Design- AMD Radeon 6900 XT Reference Design- AMD Radeon 6950 XT Reference DesignMore compatible models will follow in this list for this cooler. We are currently checking other PCB designs from various manufacturers!Download manual PDF: Alphacool Eisblock Aurora Acetal GPX-A Radeon RX 6800/XT/6900 Reference with BackplateDownload data sheet PDF: Alphacool Eisblock Aurora Acetal GPX-A Radeon RX 6800/XT/6900 Reference with Backplate

The Alphacool Eisblock Aurora GPX-N Acrylic Active Backplate for Geforce RTX 3080/3090 graphics cards is the perfect upgrade for Alphacool's Eisblock Aurora Acrylic GPX-N GPU custom water coolers (see compatibility details). With the help of the backplate, consisting of nickel-plated copper, the back of Geforce RTX 3080/3090 graphics cards can now also be actively water-cooled, thus achieving a significant increase in cooling performance.Connection optionsThere are 2 different ways to incorporate the backplate into your existing watercooling loop: Variant 1The cooler has an inlet and outlet with G1/4" internal thread on the top side respectively. With suitable connections and hoses/hard tubes, the backplate can be easily integrated into the water circuit. Variant 2The cooler has an inlet and outlet on the side suitable for 5/3mm hoses. With the help of Alphacool's MCX 2x manifold with 5/3mm tubing (item 1022250), the active backplate can be easily integrated into the water circuit in a space-saving way. This variant is a sensible choice if there is little space in the PC case and tubing runs will be difficult to do. (Note: Only works with Eisblock Aurora Acryl/ES Acetal GPX-N GPU custom water coolers. Cannot be used in combination with Alphacool Eiswolf 2 AIOs!)The connection options are very flexible for both variants, as the inlet and outlet can be freely selected depending on the design.Brilliant illuminationSix addressable digital RGB LEDs are directly recessed and run along the sides of the entire cooling block. This illuminates the entire cooling block and creates unique lighting effects. The Digital aRGB LED lighting is connected via a JST 3-pin connector and can be controlled with a Digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360) or a Digital RGB capable motherboard. Compatibility:- Alphacool Eisblock Aurora Acryl GPX-N RTX 3090 Founders Edition with backplate (article number: 11941)- Alphacool Eiswolf 2 AIO 360mm RTX 3090 Founders Edition with backplate (article number: 14463) Technical dataL x W x H206,54 x 120,71 x 13,3 mmMaterial backplatecopper, nickel-platedMaterial cooleracrylicThreads Water cooling2x G1/4" | 2x 5/3mm tube connectionIllumination6x digital addressable RGB LEDsPower connector digital aRGB LEDs3-pin JST (male & female switch)Power digital aRGB LEDs5VMaximum working temperature60 °CPressure tested0,8 BarWeight704 g

The Alphacool Aurora Acryl GPX Eisblock combines style with performance and extensive digital RGBlighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent highquality and fantastic performance. This perfectly describes the Aurora Acryl GPX EisblockMore Performance!During the development of the EIsblock Aurora GPX graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components byreducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-platedcopper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has alsobeen optimized. All important components such as the voltage transformers and the memory are nowsignificantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance.New Design!The Eisblock Aurora GPX cooler has been designed so that lighting is more important than the previousmodels. The addressable digital RGB LEDs are embedded directly into the cooling block and run alongthe entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotesbetter light diffusion in the water cooler due to the reflections on these bevels. In addition, they createvarious contours, which give the Aurora GPX Eisblock cooler its very own unique identity.Copper or Aluminium?Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX Eisblock, the copperis nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking.Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermalconductivity of aluminium and is therefore clearly the better material for water cooling.Is There Anything Else New?The Eisblock Aurora GPX also relies on the new patented stop fittings, which sit flush with the surface ofthe terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On thefront of the terminal you can see the corresponding names of the compatible graphic card types. Ofcourse, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card watercooler.The Alphacool Aurora GPX Acryl is a complete redevelopment of the previous Alphacool graphics cardwater coolers. No technical compromises were made, but the entire technical know-how flowed into thedevelopment and implementation. Compatibility:- Sapphire Nitro+ Radeon RX 5700 XT 8G, 8GB GDDR6 (11293-03-40G) Technical data GPU coolerDimension (B x T x H)120,4 x 266,7 x 25,3 mmMax working temperature60 °CMaterial coolernickel plated copperMaterial topacrylglassThikness of fins0,6 mmThreads4 x G1/4“Power supply Digital RGB3-Pin 5VPressure tested1,5 BarColortransparent

The Alphacool Aurora Acryl GPX Eisblock combines style with performance and extensive digital RGBlighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent highquality and fantastic performance. This perfectly describes the Aurora Acryl GPX EisblockMore Performance!During the development of the EIsblock Aurora GPX graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components byreducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-platedcopper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has alsobeen optimized. All important components such as the voltage transformers and the memory are nowsignificantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance.New Design!The Eisblock Aurora GPX cooler has been designed so that lighting is more important than the previousmodels. The addressable digital RGB LEDs are embedded directly into the cooling block and run alongthe entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotesbetter light diffusion in the water cooler due to the reflections on these bevels. In addition, they createvarious contours, which give the Aurora GPX Eisblock cooler its very own unique identity.Copper or Aluminium?Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX Eisblock, the copperis nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking.Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermalconductivity of aluminium and is therefore clearly the better material for water cooling.Is There Anything Else New?The Eisblock Aurora GPX also relies on the new patented stop fittings, which sit flush with the surface ofthe terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On thefront of the terminal you can see the corresponding names of the compatible graphic card types. Ofcourse, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card watercooler.The Alphacool Aurora GPX Acryl is a complete redevelopment of the previous Alphacool graphics cardwater coolers. No technical compromises were made, but the entire technical know-how flowed into thedevelopment and implementation. Compatibility:- ASRock Radeon RX 5700 XT Taichi X 8G OC+, RX5700XT TCX 8GP, 8GB GDDR6 (90-GA19ZZ-00UANF) Technical data GPU coolerDimension (B x T x H)144 x 269.5 x 25 mmNet weighgMax working temperature60 °CMaterial coolernickel plated copperMaterial topacrylThikness of fins0,6 mmThreads4 x G1/4“Power supply Digital RGB3-Pin 5VPressure tested1,5 Bar

The Alphacool Aurora Acryl GPX Eisblock combines style with performance and extensive digital RGBlighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent highquality and fantastic performance. This perfectly describes the Aurora Acryl GPX EisblockMore Performance!During the development of the EIsblock Aurora GPX graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components byreducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-platedcopper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has alsobeen optimized. All important components such as the voltage transformers and the memory are nowsignificantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance.New Design!The Eisblock Aurora GPX cooler has been designed so that lighting is more important than the previousmodels. The addressable digital RGB LEDs are embedded directly into the cooling block and run alongthe entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotesbetter light diffusion in the water cooler due to the reflections on these bevels. In addition, they createvarious contours, which give the Aurora GPX Eisblock cooler its very own unique identity.Copper or Aluminium?Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX Eisblock, the copperis nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking.Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermalconductivity of aluminium and is therefore clearly the better material for water cooling.Is There Anything Else New?The Eisblock Aurora GPX also relies on the new patented stop fittings, which sit flush with the surface ofthe terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On thefront of the terminal you can see the corresponding names of the compatible graphic card types. Ofcourse, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card watercooler.The Alphacool Aurora GPX Acryl is a complete redevelopment of the previous Alphacool graphics cardwater coolers. No technical compromises were made, but the entire technical know-how flowed into thedevelopment and implementation. Compatibility:- XFX Radeon RX 5700 DD Ultra, 8GB GDDR6 (RX-57XL8LBD6)- XFX Radeon RX 5700 XT Thicc II Ultra, 8GB GDDR6 (RX-57XT8DBD6)- XFX Radeon RX 5700 XT Thicc II, 8GB GDDR6 (RX-57XT8DFD6)- XFX Radeon RX 5700 XT Thicc III Ultra, 8GB GDDR6 (RX-57XT8TBD8) Technical data GPU coolerDimension (B x T x H)122 x 266.5 x 25 mmMax working temperature60 °CMaterial coolernickel plated copperMaterial topacrylThikness of fins0,6 mmThreads4 x G1/4“Power supply Digital RGB3-Pin 5VPressure tested1,5 BarColortransparent

The Alphacool Eisblock Aurora Acrylic GPX graphics card water cooler with backplate combines style with performance. Extreme cooling performance and an extensive digital RGB lighting characterize it. Experience and technical know-how from more than a decade have gone into the development, without making any technical compromises. The Eisblock Aurora Acryl GPX is a significant evolution of the previous Alphacool graphics card water cooler, which has been improved in every area.More performance!During the development of the Eisblock Aurora Acryl GPX graphics card water cooler, emphasis was naturally placed on increasing performance. First, the cooler was brought closer to the individual components by reducing the thickness of the heat conducting pads. Next, the nickel-plated copper block was also made thinner. Step 3 involves the constant optimisation of the water flow within the cooler. The result: All important components such as voltage converters and RAM are cooled much better and more effectively by the water and the cooling performance increases significantly.Brilliant design!The addressable digital aRGB LEDs are embedded directly in the cooling block and run along the sides of the entire cooler. The effect is an illumination that engulfs the entire cooling block. No corner or edge is left unlit by the aRGB LEDs. The new design is more angular, with all edges bevelled. The result is better light diffusion in the water cooler due to the reflections on these bevels. They also create various contours that give the Eisblock Aurora Acryl GPX cooler its very own visual touch.Copper or aluminium?Alphacool only uses copper in its water coolers. In the case of the Eisblock Aurora Acryl GPX, the copper is nickel-plated. Compared to the previous models, however, Alphacool has once again improved the type of nickel plating, which has significantly increased the acid resistance. This should prevent the nickel plating from flaking off. Why does Alphacool use copper instead of aluminium? Copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling.Other special featuresThe Eisblock Aurora Acryl GPX GPU cooler has the patented screw plugs, which sit flush with the surface of the terminal. The Alphacool logo sits in the corner on the top and is also fully illuminated. On the front of the terminal, corresponding designations of the compatible graphics card manufacturers can be seen. Of course, these are also fully illuminated by the adressable digital LEDs. IN and OUT are marked by small discreet triangles. They are easily recognisable and fit perfectly into the overall visual line of the graphics card water cooler. Compatibility:- XFX Speedster MERC 319 Radeon RX 6700 XT Black Gaming, 12GB GDDR6 (RX-67XTYTBDP)- XFX Speedster QICK 319 AMD Radeon RX 6700 XT BLACK (RX-67XTYPBDP)- XFX Speedster QICK 319 AMD Radeon RX 6700 XT Core, 12G GDDR6 (RX-67XTYLUDP)- XFX Speedster QICK 319 AMD Radeon RX 6700 XT Ultra, 12G GDDR6 (RX-67XTYPUDP) Technical data coolerL x W x H239,26 x 124 x 25 mmMaterial coolerNickle-plated copperMaterial cooler topacrylicThreads4 x G1/4Thickness cooling fins0,6 mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs10Technical data backplateL x W x H239,26 x 99,32 x 6 mmMaterialaluminiumColorblack

The Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6700XT TUF/Rog Strix with backplate combines style with performance and extensive digital RGB lighting. With experience of over 17 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock.More Performance!During the development of the Eisblock Aurora Acryl GPX-A Radeon RX 6700XT TUF/Rog Strix graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance.New Design!The Eisblock Aurora Acryl GPX-A Radeon RX 6700XT TUF/Rog Strix cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Eisblock Aurora Acryl GPX-A Radeon RX 6700XT TUF/Rog Strix cooler its very own unique identity.Copper or Aluminium?Of course, Alphacool only uses copper for its water coolers. With the Eisblock Aurora Acryl GPX-A Radeon RX 6700XT TUF/Rog Strix, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling.Is There Anything Else New?The Eisblock Aurora Acryl GPX-A Radeon RX 6700XT TUF/Rog Strix also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler.The Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6700XT TUF/Rog Strix with backplate is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Compatibility:- Asus ROG Strix Radeon RX 6700 XT OC, ROG-STRIX-RX6700XT-O12G-GAMING, 12GB GDDR6 (90YV0G81-M0NA00)- Asus TUF Gaming Radeon RX 6700 XT OC, TUF-RX6700XT-O12G-GAMING, 12GB GDDR6 (90YV0G80-M0NA00) Technical dataDimension (L x W x H)271 x 141,74 x 24,35 mmMaterial coolerNickle-plated copperMaterial cooler topacrylicThreads4 x G1/4“Thickness cooling fins0,6 mmIlluminationDigital RGB LEDsPower connector Digital RGB LEDs3-Pin JSTPower Digital RGB LEDs5VColortransparentTechnical data backplateDimension (L x W x H)271 x 117,24 x 6 mmMaterialAluminiumColorBlack

The Alphacool Aurora Acryl GPX-A 6800(XT) Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX EisblockMore Performance!During the development of the EIsblock Aurora GPX-A 6800(XT) graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance.New Design!The Eisblock Aurora GPX-A 6800(XT) cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-A 6800(XT) Eisblock cooler its very own unique identity.Copper or Aluminium?Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-A 6800(XT) Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling.Is There Anything Else New?The Eisblock Aurora GPX-A 6800(XT) also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler.The Alphacool Aurora GPX-A 6800(XT) Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Compatibility:- Sapphire Nitro+ Radeon RX 6800, 16GB GDDR6 (11305-01-20G) Technical dataDimensions (L x W x H)130 x 262,5 x 24,5 mmMaterial coolerNickle-plated copperMaterial cooler topAcrylThreads4 x G1/4“Thickness cooling fins0,6 mmIlluminationDigital RGB LEDsPower connector Digital RGB LEDs3-Pin JSTPower Digital RGB LEDs5VColortransparentTechnical data backplateDimensions106 x 262,5 x 6 mmMaterialAluminiumColorBlack

The Alphacool Aurora Acryl RADEON RX 6800/6900(XT) Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX EisblockMore Performance!During the development of the EIsblock Aurora RADEON RX 6800/6900(XT) graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance.New Design!The Eisblock Aurora RADEON RX 6800/6900(XT) cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora RADEON RX 6800/6900(XT) Eisblock cooler its very own unique identity.Copper or Aluminium?Of course, Alphacool only uses copper for its water coolers. With the Aurora RADEON RX 6800/6900(XT) Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling.Is There Anything Else New?The Eisblock Aurora RADEON RX 6800/6900(XT) also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler.The Alphacool Aurora RADEON RX 6800/6900(XT) Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Compatibility:- MSI Radeon RX 6800 Gaming X Trio 16G, 16GB GDDR6- MSI Radeon RX 6800 XT Gaming X Trio 16G, 16GB GDDR6 Technical dataDimensions (L x W x H)152 x 277 x 23 mmMaterial coolerNickle-plated copperMaterial cooler topAcrylThreads4 x G1/4“Thickness cooling fins0,6 mmIlluminationDigital RGB LEDsPower connector Digital RGB LEDs3-Pin JSTPower Digital RGB LEDs5VColortransparentTechnical data backplateDimension (L x W x H)127,5 x 277 x 6 mmMaterialAluminiumColorBlack

The Alphacool Aurora Acryl RADEON RX 6800/6900(XT) Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX EisblockMore Performance!During the development of the EIsblock Aurora RADEON RX 6800/6900(XT) graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance.New Design!The Eisblock Aurora RADEON RX 6800/6900(XT) cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora RADEON RX 6800/6900(XT) Eisblock cooler its very own unique identity.Copper or Aluminium?Of course, Alphacool only uses copper for its water coolers. With the Aurora RADEON RX 6800/6900(XT) Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling.Is There Anything Else New?The Eisblock Aurora RADEON RX 6800/6900(XT) also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler.The Alphacool Aurora RADEON RX 6800/6900(XT) Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Compatibility:- Asus ROG Strix Radeon RX 6800 OC, ROG-STRIX-RX6800-O16G-GAMING, 16GB GDDR6 (90YV0FL1-M0NM00)- Asus TUF Gaming Radeon RX 6800 OC, TUF-RX6800-O16G-GAMING, 16GB GDDR6 (90YV0FM1-M0NA00)- Asus ROG Strix Radeon RX 6800 XT OC, ROG-STRIX-RX6800XT-O16G-GAMING, 16GB GDDR6- Asus TUF Gaming Radeon RX 6800 XT OC, TUF-RX6800XT-O16G-GAMING, 16GB GDDR6 (90YV0FL1-M0NM00)- Asus TUF Gaming Radeon RX 6900 XT OC, TUF-RX6900XT-O16G-GAMING, 16GB GDDR6 (90YV0GE0-M0NM00) Data coolerDimension (L x W x H)152 x 277 x 23 mmMaterial coolerNickle-plated copperMaterial cooler topAcrylThreads4 x G1/4“Thickness cooling fins0,6 mmIlluminationDigital RGB LEDsPower connector Digital RGB LEDs3-Pin JSTPower Digital RGB LEDs5VColortransparentTechnical data backplateAbmessungen (L x W x H)127,5 x 277 x 6 mmMaterialAluminiumColorBlack

The Alphacool Aurora Acryl GPX-A 6800(XT) Eisblock merges style with high performance and extensive digital RGB lighting. With over 16 years of experience, Alphacool has the expertise to design GPU waterblocks that stand for premium quality and outstanding performance. This perfectly describes the Aurora Acryl GPX Eisblock.More Performance!In developing the Eisblock Aurora GPX-A 6800(XT) GPU block, the goal was to further enhance performance. The first step was bringing the cooler closer to each component by reducing the thickness of the thermal pads to just 1 mm. The thickness of the nickel-plated copper block was also reduced—from 7 mm to only 5.5 mm. Additionally, the internal water flow was optimized, allowing all key components such as voltage regulators and memory to be cooled much more effectively. These improvements result in a substantial increase in cooling performance.New Design!The Eisblock Aurora GPX-A 6800(XT) cooler places greater emphasis on lighting than previous models. Addressable digital RGB LEDs are integrated directly into the cooling block and extend across its entire length, creating full illumination of the cooling block. No corner or edge is left in the dark thanks to the aRGB LEDs. The new design features more angular lines, with all edges beveled. These bevels improve light diffusion within the waterblock due to reflections and create various contours that give the Aurora GPX-A 6800(XT) Eisblock a unique identity.Copper or Aluminum?Alphacool uses copper exclusively in its water coolers. For the Aurora GPX-A 6800(XT) Eisblock, the copper is nickel-plated. Compared to earlier models, Alphacool has enhanced the nickel plating, greatly increasing acid resistance and thus minimizing the risk of nickel flaking. Why does Alphacool choose copper over aluminum? Quite simply, copper has nearly twice the thermal conductivity of aluminum, making it a clearly superior material for water cooling.Anything Else New?The Eisblock Aurora GPX-A 6800(XT) also features new patented stop fittings that sit flush with the terminal’s surface. The Alphacool logo is now positioned at the corner on the top, where it is fully illuminated. The front of the terminal displays the corresponding names of compatible graphics card types, which are also fully lit by digital LEDs. IN and OUT ports are now marked by small triangles, which are easily recognizable and perfectly match the overall aesthetics of the graphics card waterblock.The Alphacool Aurora GPX-A 6800(XT) Acryl is a complete redesign of previous Alphacool GPU waterblocks. No technical compromises were made, drawing on all of Alphacool’s technical expertise during its development and implementation.Note:- This product comes with a backplate. Technical data:L x W x H: 130 x 262.5 x 24.5 mmCooler material: Nickel-plated copperTop material: AcrylicCooling fin thickness: 0.6 mmThreads: 4x G1/4“Digital RGB power connector: 3-Pin 5V (0.5A) Graphics Card Configurator: Click here!List of Compatibility: AMD graphic cardsCompatibility list:- AMD Radeon 6800 Reference Design- AMD Radeon 6800 XT Reference Design- AMD Radeon 6900 XT Reference Design- AMD Radeon 6950 XT Reference DesignMore compatible models will be added to this list for this cooler. We are currently reviewing other PCB designs from various manufacturers!Download manual PDF: Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6800/6800XT/6900XT Reference with BackplateDownload data sheet PDF: Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6800/6800XT/6900XT Reference with Backplate

The Alphacool Aurora Acryl GPX-A 6800XT/6900XT Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX EisblockMore Performance!During the development of the EIsblock Aurora GPX-A 6800XT/6900XT graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance.New Design!The Eisblock Aurora GPX-A 6800XT/6900XT cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-A 6800XT/6900XT Eisblock cooler its very own unique identity.Copper or Aluminium?Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-A 6800XT/6900XT Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling.Is There Anything Else New?The Eisblock Aurora GPX-A 6800XT/6900XT also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler.The Alphacool Aurora GPX-A 6800XT/6900XT Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Compatibility:- Sapphire Nitro+ Radeon RX 6800 XT SE, 16GB GDDR6 (11304-01-20G)- Sapphire Nitro+ Radeon RX 6800 XT, 16GB GDDR6 (11304-02-20G)- Sapphire Nitro+ Radeon RX 6900 XT, 16GB GDDR6 (11308-01-20G) Technical dataDimensions (L x W x H)142,5 x 260 x 24,5 mmMaterial coolerNickle-plated copperMaterial cooler topAcrylThreads4 x G1/4“Thickness cooling fins0,6 mmIlluminationDigital RGB LEDsPower connector Digital RGB LEDs3-Pin JSTPower Digital RGB LEDs5VColortransparentTechnical data backplateDimensions (L x W x H)118 x 260 x 6 mmMaterialAluminiumColorBlack

The Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6700XT Gaming X combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX EisblockMore Performance!During the development of the Eisblock Aurora Acryl GPX-A Radeon RX 6700XT Gaming X graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance.New Design!The Eisblock Aurora Acryl GPX-A Radeon RX 6700XT Gaming X cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Eisblock Aurora Acryl GPX-A Radeon RX 6700XT Gaming X cooler its very own unique identity.Copper or Aluminium?Of course, Alphacool only uses copper for its water coolers. With the Eisblock Aurora Acryl GPX-A Radeon RX 6700XT Gaming X, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling.Is There Anything Else New?The Eisblock Aurora Acryl GPX-A Radeon RX 6700XT Gaming X also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler.The Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6700XT Gaming X is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Compatibility:- MSI Radeon RX 6700 XT Gaming X 12G, 12GB GDDR6 (V398-007R)- MSI Radeon RX 6700 XT Mech 2X 12G OC, 12GB GDDR6 (V398-002R)- MSI Radeon RX 6700 XT Mech 2X 12G, 12GB GDDR6 (V398-005R) Technical dataDimension (L x W x H)246,38 x 141,75 x 26,6 mmMaterial coolerNickle-plated copperMaterial cooler topacrylicThreads4 x G1/4“Thickness cooling fins0,6 mmIlluminationDigital RGB LEDsPower connector Digital RGB LEDs3-Pin JSTPower Digital RGB LEDs5VColortransparentTechnical data backplateDimension (L x W x H)246,38 x 117,25 x 6 mmMaterialAluminiumColorBlack

The Alphacool Eisblock Aurora Acrylic GPX graphics card water cooler with backplate combines style with performance. Extreme cooling performance and an extensive digital RGB lighting characterize it. Experience and technical know-how from more than a decade have gone into the development, without making any technical compromises. The Eisblock Aurora Acryl GPX is a significant evolution of the previous Alphacool graphics card water cooler, which has been improved in every area.More performance!During the development of the Eisblock Aurora Acryl GPX graphics card water cooler, emphasis was naturally placed on increasing performance. First, the cooler was brought closer to the individual components by reducing the thickness of the heat conducting pads. Next, the nickel-plated copper block was also made thinner. Step 3 involves the constant optimisation of the water flow within the cooler. The result: All important components such as voltage converters and RAM are cooled much better and more effectively by the water and the cooling performance increases significantly.Chrome-plated copperThe cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers.Brilliant design!The addressable digital aRGB LEDs are embedded directly in the cooling block and run along the sides of the entire cooler. The effect is an illumination that engulfs the entire cooling block. No corner or edge is left unlit by the aRGB LEDs. The new design is more angular, with all edges bevelled. The result is better light diffusion in the water cooler due to the reflections on these bevels. They also create various contours that give the Eisblock Aurora Acryl GPX cooler its very own visual touch.Thermal paste & thermal padsThe included thermal compound is Alphacool's Subzero. With a thermal conductivity of 16 W/mk, it is one of the highest performing thermal pastes on the market. The electrically non-conductive thermal compund is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850000 TF. Alphacool Soft Pads with 1mm and 2mm thickness are used on the voltage converter and the graphics memory. The thermal conductivity of the pads is 7W/mK. The pads for the back of the PCB are 3mm thick and have a thermal conductivity of 3W/mk.Other special featuresThe Eisblock Aurora Acryl GPX GPU cooler has the patented screw plugs, which sit flush with the surface of the terminal. The Alphacool logo sits in the corner on the top and is also fully illuminated. On the front of the terminal, corresponding designations of the compatible graphics card manufacturers can be seen. Of course, these are also fully illuminated by the adressable digital LEDs. IN and OUT are marked by small discreet triangles. They are easily recognisable and fit perfectly into the overall visual line of the graphics card water cooler. Compatibility:- AMD Radeon™ RX 6750 XT Technical data coolerL x W x H230,19 x 125,8 x 35,5mmMaterial coolerchrome-plated copperMaterial cooler topacrylicThreads4 x G1/4Thickness cooling fins0,6 mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs11Technical data backplateL x W x H230,19 x 101,3 x 6mmMaterialaluminiumColorblack

The Alphacool Eisblock Aurora Acrylic GPX graphics card water cooler with backplate combines style with performance. Extreme cooling performance and an extensive digital RGB lighting characterize it. Experience and technical know-how from more than a decade have gone into the development, without making any technical compromises. The Eisblock Aurora Acryl GPX is a significant evolution of the previous Alphacool graphics card water cooler, which has been improved in every area.More performance!During the development of the Eisblock Aurora Acryl GPX graphics card water cooler, emphasis was naturally placed on increasing performance. First, the cooler was brought closer to the individual components by reducing the thickness of the heat conducting pads. Next, the chrome-plated copper block was also made thinner. Step 3 involves the constant optimisation of the water flow within the cooler. The result: All important components such as voltage converters and RAM are cooled much better and more effectively by the water and the cooling performance increases significantly.Brilliant design!The addressable digital aRGB LEDs are embedded directly in the cooling block and run along the sides of the entire cooler. The effect is an illumination that engulfs the entire cooling block. No corner or edge is left unlit by the aRGB LEDs. The new design is more angular, with all edges bevelled. The result is better light diffusion in the water cooler due to the reflections on these bevels. They also create various contours that give the Eisblock Aurora Acryl GPX cooler its very own visual touch.Copper or aluminium?Alphacool uses only copper for all water-bearing parts. Copper has almost twice the thermal conductivity of aluminum and is therefore clearly the better choice of material for water cooling. The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating.Other special featuresThe Eisblock Aurora Acryl GPX GPU cooler has the patented screw plugs, which sit flush with the surface of the terminal. The Alphacool logo sits in the corner on the top and is also fully illuminated. On the front of the terminal, corresponding designations of the compatible graphics card manufacturers can be seen. Of course, these are also fully illuminated by the adressable digital LEDs. IN and OUT are marked by small discreet triangles. They are easily recognisable and fit perfectly into the overall visual line of the graphics card water cooler. Compatibility:- EVGA GeForce RTX 3070 FTW3 Ultra Gaming (08G-P5-3767-KR)- EVGA GeForce RTX 3070 Ti FTW3 Ultra Gaming (08G-P5-3797-KL) Technical data coolerL x W x H288,5 x 149,5 x 24mmMaterial coolerchrome-plated copperMaterial cooler topacrylicThreads4 x G1/4Thickness cooling fins0,6 mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs13Technical data backplateL x W x H288,5 x 134 x 6mmMaterialaluminiumColorblack

The Alphacool Eisblock Aurora Acrylic GPX graphics card water cooler with backplate combines style with performance. Extreme cooling performance and an extensive digital RGB lighting characterize it. Experience and technical know-how from more than a decade have gone into the development, without making any technical compromises. The Eisblock Aurora Acryl GPX is a significant evolution of the previous Alphacool graphics card water cooler, which has been improved in every area. More performance! During the development of the Eisblock Aurora Acryl GPX graphics card water cooler, emphasis was naturally placed on increasing performance. First, the cooler was brought closer to the individual components by reducing the thickness of the heat conducting pads. Next, the nickel-plated copper block was also made thinner. Step 3 involves the constant optimisation of the water flow within the cooler. The result: All important components such as voltage converters and RAM are cooled much better and more effectively by the water and the cooling performance increases significantly. Brilliant design! The addressable digital aRGB LEDs are embedded directly in the cooling block and run along the sides of the entire cooler. The effect is an illumination that engulfs the entire cooling block. No corner or edge is left unlit by the aRGB LEDs. The new design is more angular, with all edges bevelled. The result is better light diffusion in the water cooler due to the reflections on these bevels. They also create various contours that give the Eisblock Aurora Acryl GPX cooler its very own visual touch. Copper or aluminium? Alphacool only uses copper in its water coolers. In the case of the Eisblock Aurora Acryl GPX, the copper is nickel-plated. Compared to the previous models, however, Alphacool has once again improved the type of nickel plating, which has significantly increased the acid resistance. This should prevent the nickel plating from flaking off. Why does Alphacool use copper instead of aluminium? Copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Other special features The Eisblock Aurora Acryl GPX GPU cooler has the patented screw plugs, which sit flush with the surface of the terminal. The Alphacool logo sits in the corner on the top and is also fully illuminated. On the front of the terminal, corresponding designations of the compatible graphics card manufacturers can be seen. Of course, these are also fully illuminated by the adressable digital LEDs. IN and OUT are marked by small discreet triangles. They are easily recognisable and fit perfectly into the overall visual line of the graphics card water cooler.Compatibility: - Colorful iGame GeForce RTX 3080 Advanced 10G - Colorful iGame GeForce RTX 3080 Advanced 10G OC - Colorful iGame GeForce RTX 3090 Advanced - Colorful iGame GeForce RTX 3090 Advanced OC Technical data cooler L x W x H 267 x 122 x 24,55 mm Material cooler Nickle-plated copper Material cooler top acrylic Threads 4 x G1/4 Thickness cooling fins 0,6 mm Illumination digital aRGB LEDs Power connector digital aRGB LEDs 3-Pin JST Power digital aRGB LEDs 5V Number of digital aRGB LEDs 14 Technical data backplate L x W x H 267 x 96,9 x 6 mm Material aluminium Color black

The Alphacool Eisblock Aurora Acrylic GPX graphics card water cooler with backplate combines style with performance. Extreme cooling performance and an extensive digital RGB lighting characterize it. Experience and technical know-how from more than a decade have gone into the development, without making any technical compromises. The Eisblock Aurora Acryl GPX is a significant evolution of the previous Alphacool graphics card water cooler, which has been improved in every area.More performance!During the development of the Eisblock Aurora Acryl GPX graphics card water cooler, emphasis was naturally placed on increasing performance. First, the cooler was brought closer to the individual components by reducing the thickness of the heat conducting pads. Next, the nickel-plated copper block was also made thinner. Step 3 involves the constant optimisation of the water flow within the cooler. The result: All important components such as voltage converters and RAM are cooled much better and more effectively by the water and the cooling performance increases significantly.Brilliant design!The addressable digital aRGB LEDs are embedded directly in the cooling block and run along the sides of the entire cooler. The effect is an illumination that engulfs the entire cooling block. No corner or edge is left unlit by the aRGB LEDs. The new design is more angular, with all edges bevelled. The result is better light diffusion in the water cooler due to the reflections on these bevels. They also create various contours that give the Eisblock Aurora Acryl GPX cooler its very own visual touch.Copper or aluminium? Alphacool uses only copper for all water-bearing parts. Copper has almost twice the thermal conductivity of aluminum and is therefore clearly the better choice of material for water cooling. The nickel-plated copper base is highly resistant to acid, which means that chipping of the nickel plating can be ruled out.Other special featuresThe Eisblock Aurora Acryl GPX GPU cooler has the patented screw plugs, which sit flush with the surface of the terminal. The Alphacool logo sits in the corner on the top and is also fully illuminated. On the front of the terminal, corresponding designations of the compatible graphics card manufacturers can be seen. Of course, these are also fully illuminated by the adressable digital LEDs. IN and OUT are marked by small discreet triangles. They are easily recognisable and fit perfectly into the overall visual line of the graphics card water cooler. Compatibility:- GeForce RTX™ 3090 Ti ROG Strix LC 24GB (90YV0HC2-M0NA00)- GeForce RTX™ 3090 Ti ROG Strix LC OC Edition 24GB (90YV0HC0-M0NA00)- GeForce RTX™ 3090 Ti TUF Gaming 24GB (90YV0HC3-M0NA00)- GeForce RTX™ 3090 Ti TUF Gaming OC 24GB (90YV0HC1-M0NA00) Technical data coolerL x W x H267 x 127,74 x 23mmMaterial coolerNickle-plated copperMaterial cooler topacrylicThreads4 x G1/4Thickness cooling fins0,6 mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs13Technical data backplateL x W x H267 x 127,74 x 6mmMaterialaluminiumColorblack

The Alphacool Aurora Acryl GPX-N RTX 3070 Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 17 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock.More Performance!During the development of the EIsblock Aurora GPX-N RTX 3070 graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the chrome-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance.New Design!The Eisblock Aurora GPX-N RTX 3070 cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-N RTX 3070 Eisblock cooler its very own unique identity.Copper or Aluminium?Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-N RTX 3070 Eisblock, the copper is chrome-plated. Compared to its predecessor models, Alphacool has improved the chrome plating even further, which has considerably increased the acid resistance. This means that the chrome should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling.Is There Anything Else New?The Eisblock Aurora GPX-N RTX 3070 also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler.The Alphacool Aurora GPX-N RTX 3070 Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Compatibility:- NVIDIA GeForce RTX 3060 Ti Founders Edition, 8GB GDDR6, HDMI, 3x DP (900-1G142-2520-000)- NVIDIA GeForce RTX 3070 Founders Edition, 8GB GDDR6, HDMI, 3x DP (900-1G142-2510-000)- NVIDIA GeForce RTX 3070 Ti Founders Edition, 8GB GDDR6X, HDMI, 3x DP (900-1G143-2515-000) Technical data coolerDimensions (L x W x H)122,5 x 169,5 x 24,5mmMaterial coolerChrome-plated copperMaterial cooler topAcrylicThreads4x G1/4“Thickness cooling fins0,6mmIlluminationDigital RGB LEDsPower connector Digital RGB LEDs3-Pin JSTPower Digital RGB LEDs5VMaximum working temperature60°CTechnical data backplateDimensions (L x W x H)98 x 169,5 x 6mmMaterialAluminumColorBlack

The Alphacool Aurora Acryl GPX-N RTX 3070 Eisblock combines style, performance, and extensive digital RGB lighting. With over 16 years of experience, Alphacool has the ability to create GPU blocks that offer high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock. More Performance! During the development of the Eisblock Aurora GPX-N RTX 3070 graphics card GPU block, we aimed to further increase the performance. The first step was to bring the cooler closer to individual components by reducing the thermal pads to a thickness of 1 mm. Next, the thickness of the nickel-plated copper block was reduced—from 7 mm to just 5.5 mm. The water flow inside the cooler has also been optimized. All key components, such as the voltage regulators and memory, are now cooled much more efficiently by the water, resulting in a significant increase in cooling performance. New Design! The Eisblock Aurora GPX-N RTX 3070 cooler has a design that emphasizes lighting more than previous models. Addressable digital RGB LEDs are embedded directly into the cooling block and run along its entire length, illuminating the entire unit with no corner or edge left unlit by the aRGB LEDs. The new design features more angular edges, all of which are beveled. This improves light diffusion within the water cooler due to the reflections on the bevels, creating unique contours that give the Aurora GPX-N RTX 3070 Eisblock its own distinctive identity. Copper or Aluminium? Alphacool uses only copper for its water coolers. In the Aurora GPX-N RTX 3070 Eisblock, the copper is nickel-plated, and compared to previous models, Aphacool has further improved the nickel plating for greater acid resistance, which helps the nickel resist flaking. Why does Alphacool prefer copper over aluminum? Simply put, copper has nearly twice the thermal conductivity of aluminum, making it clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-N RTX 3070 also features new patented stop fittings that sit flush with the terminal’s surface. The Alphacool logo is now positioned in the corner on top and is fully illuminated. On the front of the terminal, you’ll find the names of compatible graphics card types, also fully illuminated by digital LEDs. IN and OUT ports are now marked by small triangles, which are clearly visible and fit perfectly into the overall aesthetics of the card cooler. The Alphacool Aurora GPX-N RTX 3070 Acryl is a complete redesign of Alphacool’s previous graphics card water coolers. No technical compromises were made, incorporating all of Alphacool’s technical expertise into its development and implementation. Technical data: - Dimensions (L x W x H): 128 x 185 x 24.5 mm - Cooler material: Nickel-plated copper - Cooler top material: Acrylic - Threads: 4 x G1/4“ - Cooling fin thickness: 0.6 mm - Illumination: Digital RGB LEDs - Power connector, Digital RGB LEDs: 3-Pin JST - Power, Digital RGB LEDs: 5V Graphics Card Configurator: Click here! List of Compatibility: Nvidia graphics cards Compatibility: - Zotac Gaming GeForce RTX 3070 Twin Edge OC, 8GB GDDR6, HDMI, 3x DP (ZT-A30700H-10P) - Zotac Gaming GeForce RTX 3070 Twin Edge, 8GB GDDR6, HDMI, 3x DP (ZT-A30700E-10P) Download data sheet PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 Gaming Twin Edge with Backplate Download manual PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 Gaming Twin Edge with Backplate

The Alphacool Aurora Acryl GPX-N RTX 3070 Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 17 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock.More Performance!During the development of the EIsblock Aurora GPX-N RTX 3070 graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the chrome-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance.New Design!The Eisblock Aurora GPX-N RTX 3070 cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-N RTX 3070 Eisblock cooler its very own unique identity.Copper or Aluminium?Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-N RTX 3070 Eisblock, the copper is chrome-plated. Compared to its predecessor models, Alphacool has improved the chrome plating even further, which has considerably increased the acid resistance. This means that the chrome should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling.Is There Anything Else New?The Eisblock Aurora GPX-N RTX 3070 also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler.The Alphacool Aurora GPX-N RTX 3070 Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Compatibility:- MSI GeForce RTX 3060 Ti Gaming X Trio, 8GB GDDR6, HDMI, 3x DP (V390-010R)- MSI GeForce RTX 3060 Gaming X Trio 12G, 12GB GDDR6, HDMI, 3x DP (V390-081R)- MSI GeForce RTX 3070 Gaming X Trio, 8GB GDDR6, HDMI, 3x DP (V390-006R)- MSI GeForce RTX 3070 Gaming Trio, 8GB GDDR6, HDMI, 3x DP- MSI GeForce RTX 3070 Suprim X 8G, 8GB GDDR6, HDMI, 3x DP (V390-005R)- MSI GeForce RTX 3070 Ti Suprim X 8G- MSI GeForce RTX 3070 Ti Gaming X Trio 8G, 8GB GDDR6X, HDMI, 3x DP (V505-009R) Technical data coolerDimensions (L x W x H)151 x 260 x 24,5mmMaterial coolerChrome-plated copperMaterial cooler topAcrylicThreads4x G1/4“Thickness cooling fins0,6mmIlluminationDigital RGB LEDsPower connector Digital RGB LEDs3-Pin JSTPower Digital RGB LEDs5VMaximum working temperature60°CTechnical data backplateDimensions (L x W x H)126 x 260 x6 mmMaterialAluminumColorBlack

The Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 ROG Strix with Backplate combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the Eisblock Aurora Acryl GPX-N RTX 3070 ROG Strix graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora Acryl GPX-N RTX 3070 ROG Strix cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Eisblock Aurora Acryl GPX-N RTX 3070 ROG Strix cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Eisblock Aurora Acryl GPX-N RTX 3070 ROG Strix, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora Acryl GPX-N RTX 3070 ROG Strix also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 ROG Strix is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Technical details L x W x H 152 x 267 x 25 mm Material cooler Nickle-plated copper Material cooler top POM clear Threads 4 x G1/4“ Thickness cooling fins 0,6 mm Illumination Digital RGB LEDs Power connector Digital RGB LEDs 3-Pin JST Power Digital RGB LEDs 5V Graphics Card Configurator: Click here!List of Compatibility: Nvidia graphic cards Compatibility:- ASUS ROG Strix GeForce RTX 3070 8GB Advanced (ROG-STRIX-RTX3070-A8G-GAMING) - ASUS ROG Strix GeForce RTX 3070 OC White, ROG-STRIX-RTX3070-O8G-WHITE (90YV0FR5-M0NA00) - ASUS ROG Strix GeForce RTX 3070 White Edition (ROG-STRIX-RTX3070-8G-WHITE) - ASUS ROG Strix RTX 3070 8G Gaming (ROG-STRIX-RTX3070-8G-GAMING) - ASUS ROG Strix RTX 3070 8G Gaming OC - ASUS ROG Strix RTX 3070 8GB TOP (ROG-STRIX-RTX3070-T8G-GAMING) - ASUS ROG Strix RTX 3070 8GB OC (ROG-STRIX-RTX3070-O8G-GAMING) Download Datasheet PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 ROG Strix with Backplate DatasheetDownload Manual PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 ROG Strix with Backplate Manual

The Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 DUAL/TUF with Backplate combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the Eisblock Aurora Acryl GPX-N RTX 3070 DUAL/TUF graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora Acryl GPX-N RTX 3070 DUAL/TUF cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Eisblock Aurora Acryl GPX-N RTX 3070 DUAL/TUF cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Eisblock Aurora Acryl GPX-N RTX 3070 DUAL/TUF, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora Acryl GPX-N RTX 3070 DUAL/TUF also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 DUAL/TUF is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Technical details L x W x H 143 x 240 x 24,5 mm Material cooler Nickle-plated copper Material cooler top POM clear Threads 4 x G1/4“ Thickness cooling fins 0,6 mm Illumination Digital RGB LEDs Power connector Digital RGB LEDs 3-Pin JST Power Digital RGB LEDs 5V Graphics Card Configurator: Click here!List of Compatibility: Nvidia graphic cards Compatibility:- ASUS TUF Gaming GeForce RTX 3070 OC, TUF-RTX3070-O8G-GAMING, 8GB GDDR6, 2x HDMI, 3x DP (90YV0FQ6-M0NA00) - ASUS TUF Gaming GeForce RTX 3070, TUF-RTX3070-8G-GAMING, 8GB GDDR6, 2x HDMI, 3x DP (90YV0FQ7-M0NA00) - ASUS Dual GeForce RTX 3070 OC, DUAL-RTX3070-O8G, 8GB GDDR6, 2x HDMI, 3x DP (90YV0FQ0-M0NA00) - ASUS Dual GeForce RTX 3070, DUAL-RTX3070-8G, 8GB GDDR6, 2x HDMI, 3x DP (90YV0FQ1-M0NA00) Download Datasheet PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 TUF/DUAL with BackplateDownload Manual PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 TUF/DUAL with Backplate

The Alphacool Eisblock Aurora Acrylic GPX graphics card water cooler with backplate combines style with performance. Extreme cooling performance and an extensive digital RGB lighting characterize it. Experience and technical know-how from more than a decade have gone into the development, without making any technical compromises. The Eisblock Aurora Acryl GPX is a significant evolution of the previous Alphacool graphics card water cooler, which has been improved in every area.Important note: The Reference cooler is not compatible with Nvidia's Founders Edition.More performance!During the development of the Eisblock Aurora Acryl GPX graphics card water cooler, emphasis was naturally placed on increasing performance. First, the cooler was brought closer to the individual components by reducing the thickness of the heat conducting pads. Next, the chrome-plated copper block was also made thinner. Step 3 involves the constant optimisation of the water flow within the cooler. The result: All important components such as voltage converters and RAM are cooled much better and more effectively by the water and the cooling performance increases significantly.Brilliant design!The addressable digital aRGB LEDs are embedded directly in the cooling block and run along the sides of the entire cooler. The effect is an illumination that engulfs the entire cooling block. No corner or edge is left unlit by the aRGB LEDs. The new design is more angular, with all edges bevelled. The result is better light diffusion in the water cooler due to the reflections on these bevels. They also create various contours that give the Eisblock Aurora Acryl GPX cooler its very own visual touch.Copper or aluminium?Alphacool uses only copper for all water-bearing parts. Copper has almost twice the thermal conductivity of aluminum and is therefore clearly the better choice of material for water cooling. The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating.Other special featuresThe Eisblock Aurora Acryl GPX GPU cooler has the patented screw plugs, which sit flush with the surface of the terminal. The Alphacool logo sits in the corner on the top and is also fully illuminated. On the front of the terminal, corresponding designations of the compatible graphics card manufacturers can be seen. Of course, these are also fully illuminated by the adressable digital LEDs. IN and OUT are marked by small discreet triangles. They are easily recognisable and fit perfectly into the overall visual line of the graphics card water cooler. Compatibility:- INNO3D GeForce RTX 3070 iCHILL X3, 8GB GDDR6, HDMI, 3x DP (C30703-08D6X-1710VA38)- INNO3D GeForce RTX 3070 iCHILL X4, 8GB GDDR6, HDMI, 3x DP (C30704-08D6X-1710VA35)- INNO3D GeForce RTX 3070 Twin X2 OC, 8GB GDDR6, HDMI, 3x DP (N30702-08D6X-1710VA32L)- INNO3D GeForce RTX 3070 Twin X2, 8GB GDDR6, HDMI, 3x DP (N30702-08D6-1710VA32L) Technical data coolerL x W x H239 x 122 x 25mmMaterial coolerchrome-plated copperMaterial cooler topacrylicThreads4 x G1/4Thickness cooling fins0,6 mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs11Technical data backplateL x W x H239 x 97 x 6mmMaterialaluminiumColorblack

The Alphacool Eisblock Aurora Acrylic GPX graphics card water cooler with backplate combines style with performance. Extreme cooling performance and an extensive digital RGB lighting characterize it. Experience and technical know-how from more than a decade have gone into the development, without making any technical compromises. The Eisblock Aurora Acryl GPX is a significant evolution of the previous Alphacool graphics card water cooler, which has been improved in every area. More performance! During the development of the Eisblock Aurora Acryl GPX graphics card water cooler, emphasis was naturally placed on increasing performance. First, the cooler was brought closer to the individual components by reducing the thickness of the heat conducting pads. Next, the nickel-plated copper block was also made thinner. Step 3 involves the constant optimisation of the water flow within the cooler. The result: All important components such as voltage converters and RAM are cooled much better and more effectively by the water and the cooling performance increases significantly. Brilliant design! The addressable digital RGB LEDs are embedded directly in the cooling block and run along the sides of the entire cooler. The effect is an illumination that engulfs the entire cooling block. No corner or edge is left unlit by the aRGB LEDs. The new design is more angular, with all edges bevelled. The result is better light diffusion in the water cooler due to the reflections on these bevels. They also create various contours that give the Eisblock Aurora Acryl GPX cooler its very own visual touch. Copper or aluminium? Alphacool only uses copper in its water coolers. In the case of the Eisblock Aurora Acryl GPX, the copper is nickel-plated. Compared to the previous models, however, Alphacool has once again improved the type of nickel plating, which has significantly increased the acid resistance. This should prevent the nickel plating from flaking off. Why does Alphacool use copper instead of aluminium? Copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Other special features The Eisblock Aurora Acryl GPX GPU cooler has the patented screw plugs, which sit flush with the surface of the terminal. The Alphacool logo sits in the corner on the top and is also fully illuminated. On the front of the terminal, corresponding designations of the compatible graphics card manufacturers can be seen. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are marked by small discreet triangles. They are easily recognisable and fit perfectly into the overall visual line of the graphics card water cooler. Technical data cooler L x W x H 184,58 x 127,1 x 23,55 mm Material cooler Nickle-plated copper Material cooler top acrylic Threads 4 x G1/4 Thickness cooling fins 0,6 mm Illumination digital RGB LEDs Power connector digital RGB LEDs 3-Pin JST Power digital RGB LEDs 5V Technical data backplate L x W x H 184,58 x 102,6 x 6 mm Material aluminium Color black Compatibility:Zotac Gaming GeForce RTX 3070 Ti AMP Holo (ZT-A30710F-10P)Zotac Gaming GeForce RTX 3070 Ti Trinity OC (ZT-A30710J-10P)Zotac Gaming GeForce RTX 3070 Ti Trinity (ZT-A30710D-10P)

The Alphacool Eisblock Aurora Acrylic GPX graphics card water cooler with backplate combines style with performance. Extreme cooling performance and an extensive digital RGB lighting characterize it. Experience and technical know-how from more than a decade have gone into the development, without making any technical compromises. The Eisblock Aurora Acryl GPX is a significant evolution of the previous Alphacool graphics card water cooler, which has been improved in every area. More performance! During the development of the Eisblock Aurora Acryl GPX graphics card water cooler, emphasis was naturally placed on increasing performance. First, the cooler was brought closer to the individual components by reducing the thickness of the heat conducting pads. Next, the nickel-plated copper block was also made thinner. Step 3 involves the constant optimisation of the water flow within the cooler. The result: All important components such as voltage converters and RAM are cooled much better and more effectively by the water and the cooling performance increases significantly. Brilliant design! The addressable digital aRGB LEDs are embedded directly in the cooling block and run along the sides of the entire cooler. The effect is an illumination that engulfs the entire cooling block. No corner or edge is left unlit by the aRGB LEDs. The new design is more angular, with all edges bevelled. The result is better light diffusion in the water cooler due to the reflections on these bevels. They also create various contours that give the Eisblock Aurora Acryl GPX cooler its very own visual touch. Copper or aluminium? Alphacool only uses copper in its water coolers. In the case of the Eisblock Aurora Acryl GPX, the copper is nickel-plated. Compared to the previous models, however, Alphacool has once again improved the type of nickel plating, which has significantly increased the acid resistance. This should prevent the nickel plating from flaking off. Why does Alphacool use copper instead of aluminium? Copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Other special features The Eisblock Aurora Acryl GPX GPU cooler has the patented screw plugs, which sit flush with the surface of the terminal. The Alphacool logo sits in the corner on the top and is also fully illuminated. On the front of the terminal, corresponding designations of the compatible graphics card manufacturers can be seen. Of course, these are also fully illuminated by the adressable digital LEDs. IN and OUT are marked by small discreet triangles. They are easily recognisable and fit perfectly into the overall visual line of the graphics card water cooler.Compatibility:- NVIDIA GeForce RTX 3070 Ti Founders Edition, 8GB GDDR6X, HDMI, 3x DP Technical data cooler L x W x H 187,97 x 123,09 x 33,95 mm Material cooler Nickle-plated copper Material cooler top acrylic Threads 4 x G1/4 Thickness cooling fins 0,6 mm Illumination digital aRGB LEDs Power connector digital aRGB LEDs 3-Pin JST Power digital aRGB LEDs 5V Number of digital aRGB LEDs 11 Technical data backplate L x W x H 187,97 x 98,59 x 6 mm Material aluminium Color black

The Alphacool Eisblock Aurora Acrylic GPX graphics card water cooler with backplate combines style with performance. Extreme cooling performance and an extensive digital RGB lighting characterize it. Experience and technical know-how from more than a decade have gone into the development, without making any technical compromises. The Eisblock Aurora Acryl GPX is a significant evolution of the previous Alphacool graphics card water cooler, which has been improved in every area. More performance! During the development of the Eisblock Aurora Acryl GPX graphics card water cooler, emphasis was naturally placed on increasing performance. First, the cooler was brought closer to the individual components by reducing the thickness of the heat conducting pads. Next, the nickel-plated copper block was also made thinner. Step 3 involves the constant optimisation of the water flow within the cooler. The result: All important components such as voltage converters and RAM are cooled much better and more effectively by the water and the cooling performance increases significantly. Brilliant design! The addressable digital aRGB LEDs are embedded directly in the cooling block and run along the sides of the entire cooler. The effect is an illumination that engulfs the entire cooling block. No corner or edge is left unlit by the aRGB LEDs. The new design is more angular, with all edges bevelled. The result is better light diffusion in the water cooler due to the reflections on these bevels. They also create various contours that give the Eisblock Aurora Acryl GPX cooler its very own visual touch. Copper or aluminium? Alphacool only uses copper in its water coolers. In the case of the Eisblock Aurora Acryl GPX, the copper is nickel-plated. Compared to the previous models, however, Alphacool has once again improved the type of nickel plating, which has significantly increased the acid resistance. This should prevent the nickel plating from flaking off. Why does Alphacool use copper instead of aluminium? Copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Other special features The Eisblock Aurora Acryl GPX GPU cooler has the patented screw plugs, which sit flush with the surface of the terminal. The Alphacool logo sits in the corner on the top and is also fully illuminated. On the front of the terminal, corresponding designations of the compatible graphics card manufacturers can be seen. Of course, these are also fully illuminated by the adressable digital LEDs. IN and OUT are marked by small discreet triangles. They are easily recognisable and fit perfectly into the overall visual line of the graphics card water cooler.Compatibility:- KFA² GeForce RTX 3070 Ti SG (1-Click OC), 8GB GDDR6X, HDMI, 3x DP Technical data cooler L x W x H 214,59 x 123,23 x 24,35 mm Material cooler Nickle-plated copper Material cooler top acrylic Threads 4 x G1/4 Thickness cooling fins 0,6 mm Illumination digital aRGB LEDs Power connector digital aRGB LEDs 3-Pin JST Power digital aRGB LEDs 5V Number of digital aRGB LEDs 11 Technical data backplate L x W x H 214,59 x 98,83 x 6 mm Material aluminium Color black

The Alphacool Aurora Acryl GPX-N RTX 3080/3090 Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX EisblockMore Performance! During the development of the EIsblock Aurora GPX-N RTX 3080/3090 graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance.New Design! The Eisblock Aurora GPX-N RTX 3080/3090 cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-N RTX 3080/3090 Eisblock cooler its very own unique identity.Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-N RTX 3080/3090 Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling.Is There Anything Else New? The Eisblock Aurora GPX-N RTX 3080/3090 also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-N RTX 3080/3090 Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation.Technical data:L x W x H: 146 x 269,5 x 25 mmMaterial cooler: Nickle-plated copperMaterial cooler top: AcrylThreads: 4 x G1/4“Thickness cooling fins: 0,6 mmIllumination: Digital RGB LEDsPower connector Digital RGB LEDs: 3-Pin JSTPower Digital RGB LEDs: 5V Graphics Card Configurator: Click here!List of Compatibility: Nvidia graphic cards Compatibility:RTX 3080TIGigabyte Aorus GeForce RTX 3080 Ti Xtreme 12GB (GV-N308TAORUS X-12GD)Gigabyte Aorus GeForce RTX 3080 Ti Master 12GB (GV-N308TAORUS M-12GD)RTX 3080Gigabyte Aorus GeForce RTX 3080 Master 10G, 10GB GDDR6X, 3x HDMI, 3x DP (GV-N3080AORUS M-10GD)Gigabyte Aorus GeForce RTX 3080 Xtreme 10G, 10GB GDDR6X, 3x HDMI, 3x DP (GV-N3080AORUS X-10GD)RTX 3090Gigabyte Aorus GeForce RTX 3090 Master 24G, 24GB GDDR6X, 3x HDMI, 3x DP (GV-N3090AORUS M-24GD)Gigabyte Aorus GeForce RTX 3090 Xtreme 24G, 24GB GDDR6X, 3x HDMI, 3x DP (GV-N3090AORUS X-24GD) Download data sheet PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3080/3090 Aorus Master Xtreme with BackplateDownload manual PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3080/3090 Aorus Master Xtreme with Backplate

The Alphacool Eisblock Aurora Acryl GPX-N RTX 3080/3090 Turbo combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the Eisblock Aurora Acryl GPX-N RTX 3080/3090 Turbo graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora Acryl GPX-N RTX 3080/3090 Turbo cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Eisblock Aurora Acryl GPX-N RTX 3080/3090 Turbo cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Eisblock Aurora Acryl GPX-N RTX 3080/3090 Turbo, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora Acryl GPX-N RTX 3080/3090 Turbo also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Eisblock Aurora Acryl GPX-N RTX 3080/3090 Turbo is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Technical data cooler L x W x H 266,65 x 122,4 x 24,35 mm Material cooler Nickle-plated copper Material cooler top Acrylic Threads 4 x G1/4“ Thickness cooling fins 0,6 mm Illumination Digital RGB LEDs Power connector Digital RGB LEDs 3-Pin JST Power Digital RGB LEDs 5V Technical data backplate L x W x H 266,65 x 97,6 x 6 mm Material Aluminium Color Black Compatibility list:- ASUS Turbo GeForce RTX 3080 10GB (TURBO-RTX3080-10G) - ASUS Turbo GeForce RTX 3080 V2 10GB (TURBO-RTX3080-10G-V2) - ASUS Turbo GeForce RTX 3090 (90YV0FK0-M0NB00) Downloads:Datasheet PDF | Manual PDF | Nvidia List of Compatibility PDF Links: Graphics Card Configurator

The Alphacool Aurora Acryl GPX-N RTX 3080/3090 XC3 Ultra Gaming Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the EIsblock Aurora GPX-N RTX 3080/3090 XC3 Ultra Gaming graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora GPX-N RTX 3080/3090 XC3 Ultra Gaming cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-N RTX 3080/3090 XC3 Ultra Gaming Eisblock cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-N RTX 3080/3090 XC3 Ultra Gaming Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-N RTX 3080/3090 XC3 Ultra Gaming also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-N RTX 3080/3090 XC3 Ultra Gaming Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Technical data:L x W x H: 125 x 264 x 24,5 mmMaterial cooler: Nickle-plated copperMaterial cooler top: AcrylThreads: 4 x G1/4“Thickness cooling fins: 0,6 mmIllumination: Digital RGB LEDsPower connector Digital RGB LEDs: 3-Pin JSTPower Digital RGB LEDs: 5V Graphics Card Configurator: Click here!List of Compatibility: Nvidia graphic cards Compatibility:RTX 3080TIEVGA GeForce RTX 3080 Ti XC3 Ultra Gaming (12G-P5-3955-KR)EVGA GeForce RTX 3080 Ti XC3 Gaming, 12GB GDDR6X, HDMI, 3x DP (12G-P5-3953-KR)RTX 3080EVGA GeForce RTX 3080 XC3 Black Gaming, 10GB GDDR6X, HDMI, 3x DP (10G-P5-3881-KR)EVGA GeForce RTX 3080 XC3 Ultra Gaming, 10GB GDDR6X, HDMI, 3x DP (10G-P5-3885-KR) Download data sheet PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3080/3090 XC3 Ultra Gaming with BackplateDownload manual PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3080/3090 XC3 Ultra Gaming with Backplate

The Alphacool Eisblock Aurora Acrylic GPX graphics card water cooler with backplate combines style with performance. Extreme cooling performance and an extensive digital RGB lighting characterize it. Experience and technical know-how from more than a decade have gone into the development, without making any technical compromises. The Eisblock Aurora Acryl GPX is a significant evolution of the previous Alphacool graphics card water cooler, which has been improved in every area.More performance!During the development of the Eisblock Aurora Acryl GPX graphics card water cooler, emphasis was naturally placed on increasing performance. First, the cooler was brought closer to the individual components by reducing the thickness of the heat conducting pads. Next, the nickel-plated copper block was also made thinner. Step 3 involves the constant optimisation of the water flow within the cooler. The result: All important components such as voltage converters and RAM are cooled much better and more effectively by the water and the cooling performance increases significantly.Brilliant design!The addressable digital aRGB LEDs are embedded directly in the cooling block and run along the sides of the entire cooler. The effect is an illumination that engulfs the entire cooling block. No corner or edge is left unlit by the aRGB LEDs. The new design is more angular, with all edges bevelled. The result is better light diffusion in the water cooler due to the reflections on these bevels. They also create various contours that give the Eisblock Aurora Acryl GPX cooler its very own visual touch.Copper or aluminium?Alphacool only uses copper in its water coolers. In the case of the Eisblock Aurora Acryl GPX, the copper is nickel-plated. Compared to the previous models, however, Alphacool has once again improved the type of nickel plating, which has significantly increased the acid resistance. This should prevent the nickel plating from flaking off. Why does Alphacool use copper instead of aluminium? Copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling.Other special featuresThe Eisblock Aurora Acryl GPX GPU cooler has the patented screw plugs, which sit flush with the surface of the terminal. The Alphacool logo sits in the corner on the top and is also fully illuminated. On the front of the terminal, corresponding designations of the compatible graphics card manufacturers can be seen. Of course, these are also fully illuminated by the adressable digital LEDs. IN and OUT are marked by small discreet triangles. They are easily recognisable and fit perfectly into the overall visual line of the graphics card water cooler. Compatibility:EVGA GeForce RTX 3090 Ti FTW3 Ultra Hydro Copper Gaming (24G-P5-4989-KR)EVGA GeForce RTX 3090 Ti FTW3 Ultra Hybrid Gaming (24G-P5-4988-KR)EVGA GeForce RTX 3090 Ti FTW3 Ultra Gaming (24G-P5-4985-KR)EVGA GeForce RTX 3090 Ti FTW3 Gaming (24G-P5-4983-KR)EVGA GeForce RTX 3090 Ti FTW3 Black Gaming (24G-P5-4981-KR) Technical data coolerL x W x H290 x 151 x 24mmMaterial coolerNickle-plated copperMaterial cooler topacrylicThreads4 x G1/4Thickness cooling fins0,6 mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs11Technical data backplateL x W x H290 x 125 x 6mmMaterialaluminiumColorblack

The Alphacool Eisblock Aurora Acrylic GPX graphics card water cooler with backplate combines style with performance. Extreme cooling performance and an extensive digital RGB lighting characterize it. Experience and technical know-how from more than a decade have gone into the development, without making any technical compromises. The Eisblock Aurora Acryl GPX is a significant evolution of the previous Alphacool graphics card water cooler, which has been improved in every area.More performance!During the development of the Eisblock Aurora Acryl GPX graphics card water cooler, emphasis was naturally placed on increasing performance. First, the cooler was brought closer to the individual components by reducing the thickness of the heat conducting pads. Next, the nickel-plated copper block was also made thinner. Step 3 involves the constant optimisation of the water flow within the cooler. The result: All important components such as voltage converters and RAM are cooled much better and more effectively by the water and the cooling performance increases significantly.Brilliant design!The addressable digital aRGB LEDs are embedded directly in the cooling block and run along the sides of the entire cooler. The effect is an illumination that engulfs the entire cooling block. No corner or edge is left unlit by the aRGB LEDs. The new design is more angular, with all edges bevelled. The result is better light diffusion in the water cooler due to the reflections on these bevels. They also create various contours that give the Eisblock Aurora Acryl GPX cooler its very own visual touch.Copper or aluminium?Alphacool only uses copper in its water coolers. In the case of the Eisblock Aurora Acryl GPX, the copper is nickel-plated. Compared to the previous models, however, Alphacool has once again improved the type of nickel plating, which has significantly increased the acid resistance. This should prevent the nickel plating from flaking off. Why does Alphacool use copper instead of aluminium? Copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling.Other special featuresThe Eisblock Aurora Acryl GPX GPU cooler has the patented screw plugs, which sit flush with the surface of the terminal. The Alphacool logo sits in the corner on the top and is also fully illuminated. On the front of the terminal, corresponding designations of the compatible graphics card manufacturers can be seen. Of course, these are also fully illuminated by the adressable digital LEDs. IN and OUT are marked by small discreet triangles. They are easily recognisable and fit perfectly into the overall visual line of the graphics card water cooler. Compatibility:MSI GeForce RTX 3090 Ti Suprim X 24G, 24GB GDDR6X, HDMI, 3x DPMSI GeForce RTX 3090 Ti Gaming X Trio 24G, 24GB GDDR6X, HDMI, 3x DPMSI GeForce RTX 3090 Ti Gaming Trio 24G, 24GB GDDR6X, HDMI, 3x DPMSI GeForce RTX 3090 Ti Suprim 24G, 24GB GDDR6X, HDMI, 3x DP Technical data coolerL x W x H266 x 153 x 24 mmMaterial coolerNickle-plated copperMaterial cooler topacrylicThreads4 x G1/4Thickness cooling fins0,6 mmMaximum working temperature60 °CIllumination13x Digital RGB LEDsPower connector Digital RGB LEDs3-Pin JSTPower Digital RGB LEDs5VTechnical data backplateL x W x H266 x 128 x 6 mmMaterialaluminiumColorblack

The Alphacool Eisblock Aurora Acryl GPX-N RTX 3090/3080 TI HOF combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the Eisblock Aurora Acryl GPX-N RTX 3090/3080 TI HOF graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora Acryl GPX-N RTX 3090/3080 TI HOF cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Eisblock Aurora Acryl GPX-N RTX 3090/3080 TI HOF cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Eisblock Aurora Acryl GPX-N RTX 3090/3080 TI HOF, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora Acryl GPX-N RTX 3090/3080 TI HOF also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Eisblock Aurora Acryl GPX-N RTX 3090/3080 TI HOF is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Technical Data cooler L x W x H 295 x 150 x 24,7 mm Material cooler Nickle-plated copper Material cooler top POM clear Threads 4 x G1/4“ Thickness cooling fins 0,6 mm Illumination Digital RGB LEDs Power connector Digital RGB LEDs 3-Pin JST Power Digital RGB LEDs 5V Technical Data backplate L x W x H 295 x 125,25 x 6 mm Material Aluminium Color Black Graphics Card Configurator: Click here!List of Compatibility: Nvidia graphic cards Compatibility: - GALAX GeForce RTX 3080 Ti HOF 12GB (38IOM5MD3BHX) - GALAX GeForce RTX 3090 HOF - KFA2 GeForce RTX 3080 Ti HOF Premium (38IOM5MD3BAK) Download Datasheet PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3090/3080 TI HOF with Backplate Download Manual PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3090/3080 TI HOF wih Backplate