Arvutitark OÜ

With Alphacool Eiswasser, water cooling pioneer Alphacool is checking off every modder and enthusiast’s wish list: brilliant colours, cool effects in plexi coolers, tubing and reservoirs, as well as a long lifespan and material compatibility. The Alphacool Eiswasser Crystal Series has been tested in every possible application both in Alphacool’s lab and by external testers and modders, and was proven to be high-quality and long-lasting.If you’re looking to add some illumination to your PC, the Alphacool Eiswasser Crystal UV is for you. It has excellent UV-reactivity with UV-LEDs or cathodes.Alphacool Eiswasser gives your water cooling system an extra visual highlight with great cooling performance.Note: This cooling liquid does not contain any biocides or anti-corrosion additives. It should also be noted that the loop must be cleaned more frequently when using this colored liquid. The dyes it contains can clog the circuit after a long period of use and impair cooling performance. Alphacool's Eiswasser series is therefore more suitable for use in show cases than in gaming or work PCs. It is essential to avoid adding other biocides or anti-corrosion fluids, as well as diluting the fluid with distilled water, otherwise the basic and coordinated properties of the fluid will be lost. Technical dataUV inkNot UV activeContent1000mlSpecificationReady mixColoryellowManufacturerAlphacool

The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans.Fullcover Waterblock?The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler.PumpThe Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal.Fittings and TubingAs with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly.ExpandabilityBy using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together.Lighting and fansThe Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm.NexXxoS RadiatorAs with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success.The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop.Technical note!Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there. Compatibility:- Asus ROG Strix LC GeForce RTX 3090 Ti OC, ROG-STRIX-LC-RTX3090TI-O24G-GAMING, 24GB GDDR6X (90YV0HC0-M0NA00)- Asus ROG Strix LC GeForce RTX 3090 Ti, ROG-STRIX-LC-RTX3090TI-24G-GAMING, 24GB GDDR6X (90YV0HC2-M0NA00)- Asus TUF Gaming GeForce RTX 3090 Ti OC, TUF-RTX3090TI-O24G-GAMING, 24GB GDDR6X (90YV0HC1-M0NA00)- Asus TUF Gaming GeForce RTX 3090 Ti, TUF-RTX3090TI-24G-GAMING, 24GB GDDR6X (90YV0HC3-M0NA00) Technical data radiatorL x W x H395 x 124 x 30mm (+/- 3%)Material cooling fins, chambers & channelsCopperMaterial threadsBrassMaterial outer housingstainless steelG 1/4“ threads2 x for tubes (+ 1x Fillport G1/4“)For fan size120 mmPossible fan assembly3 x one-sided / 6 x both-sidedTechnical data cooler and pumpL x W x H267 x 161,84 x 48,23mmMaterial cooler bottomChrome plated copperMaterial cooler topacrylicThreads2 x G1/4“Pump typeDC-LT 2Pump speed2600 rpm (+/- 10%)Head of delivery1 mMaximum flow rate72 L/hVoltage6-13.5V DCPower consumption3.2WMTBF50.000 hTechnical data liquidColorclearIngredient 1Destilled water (CAS-number 7732-18-5)Ingredient 2Glysantin (CAS-number 1017-21-1)Working temperatures-15 C° / +90 °CTechnical data quick fastenersL x D95 x 27mmMaterialNylonFor tube size12,7 / 7,6mmColorBlackTechnical data fittingsL x D straight fitting24 x 18mmQuantity straight fittings2xL x B x H 90° fitting35 x 27 x 17mmQuantity 90° fittings2xFor tube size12,7 / 7,6mmMaterial fittingsBrassTechnical data tubeLength50cmMaterial tubeTPV (EPDM/PP)ColorMatt blackTube size12,7 / 7,6mmHardness grade35 Shore-A to 50 Shore-DWorking temperature-50 to +155 °CTechnical data fanSpeed0 - 2500 RPMStatic pressure3,17 mm H2OAir flow rate119,8 m³/hBearingsSleeve bearingFan connector4-Pin PWMConnection Digital aRGB3-Pin JST + 3-Pin 5VDimensions120 x 120 x 25mmNet weight187gMax working temperature60°C

The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans.Fullcover Waterblock?The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler.PumpThe Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal.Fittings and TubingAs with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly.ExpandabilityBy using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together.Lighting and fansThe Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm.NexXxoS RadiatorAs with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success.The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop.Technical note!Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there. Compatibility:- MSI GeForce RTX 3090 Ti Gaming Trio 24G, 24GB GDDR6X (V509-029R)- MSI GeForce RTX 3090 Ti Gaming X Trio 24G, 24GB GDDR6X (V509-014R)- MSI GeForce RTX 3090 Ti Suprim 24G, 24GB GDDR6X- MSI GeForce RTX 3090 Ti Suprim X 24G, 24GB GDDR6X (V509-003R) Technical data radiatorL x W x H395 x 124 x 30mm (+/- 3%)Material cooling fins, chambers & channelsCopperMaterial threadsBrassMaterial outer housingstainless steelG 1/4“ threads2 x for tubes (+ 1x Fillport G1/4“)For fan size120 mmPossible fan assembly3 x one-sided / 6 x both-sidedTechnical data cooler and pumpL x W x H265,8 x 162,5 x 46mmMaterial cooler bottomChrome plated copperMaterial cooler topacrylicThreads2 x G1/4“Pump typeDC-LT 2Pump speed2600 rpm (+/- 10%)Head of delivery1 mMaximum flow rate72 L/hVoltage6-13.5V DCPower consumption3.2WMTBF50.000 hTechnical data liquidColorclearIngredient 1Destilled water (CAS-number 7732-18-5)Ingredient 2Glysantin (CAS-number 1017-21-1)Working temperatures-15 C° / +90 °CTechnical data quick fastenersL x D95 x 27mmMaterialNylonFor tube size12,7 / 7,6mmColorBlackTechnical data fittingsL x D straight fitting24 x 18mmQuantity straight fittings2xL x B x H 90° fitting35 x 27 x 17mmQuantity 90° fittings2xFor tube size12,7 / 7,6mmMaterial fittingsBrassTechnical data tubeLength50cmMaterial tubeTPV (EPDM/PP)ColorMatt blackTube size12,7 / 7,6mmHardness grade35 Shore-A to 50 Shore-DWorking temperature-50 to +155 °CTechnical data fanSpeed0 - 2500 RPMStatic pressure3,17 mm H2OAir flow rate119,8 m³/hBearingsSleeve bearingFan connector4-Pin PWMConnection Digital aRGB3-Pin JST + 3-Pin 5VDimensions120 x 120 x 25mmNet weight187gMax working temperature60°C

All-in-One-Wasserkühlung, für NVIDIA GeForce RTX 4080 FE, 360 mm Radiator, 3x 120-mm-PWM-Lüfter, mit integrierter RGB-Beleuchtung

All-in-One-Wasserkühlung, für MSI GeForce RTX 4080 Gaming und Suprim, 360 mm Radiator, 3x 120-mm-PWM-Lüfter, mit integrierter RGB-Beleuchtung

All-in-One-Wasserkühlung, für NVIDIA GeForce RTX 4090 FE-Grafikkarten, 360 mm Radiator, 3x 120-mm-PWM-Lüfter, mit integrierter RGB-Beleuchtung

With the "Icicles", Alphacool has created a true masterpiece. These connections promise absolute tightness and high quality. Suitable for all hard metal pipes with an outer diameter of 12mm. On the other side of the connection there is the usual ¼” thread. Available in deep black and chrome. First, the union nut is put on the pipe, followed by a plastic washer that protects the O-ring and the thick O-ring itself. Now the pipe is simply put into the connection in which the second O-ring is already sitting, which fits very tightly against the pipe. As a last step, the union nut is pushed onto the connection and screwed on. Due to the size, the union nut cannot be screwed on tightly enough. But this has also been thought of, as an 8 mm hexagon key can be inserted from below to hold the connection in place. scope of delivery 1x Alphacool Eiszapfen 12mm HardTube screw-on nozzle G1/4 - Deep Black

Alphacools Eiszapfen Fitting series is the high-end version of the proven compression fitting!All requirements that are placed on a fitting are met here: Highflow, shape, processing and color scheme. Uncompromising development and manufacturing have made the Eiszapfen what they are. In brilliant white, they blend excellently into any system.Special processes are used to bond the coatings firmly to the substrate. The longevity of the intense colors is thus given and chipping of the coating is prevented. Each fitting has the Alphacool logo which makes it unmistakable in addition to its special shape!The beveled edges of the compression nut press the O-ring tightly against the hose, keeping it securely in place.Sixpack:Since six fittings of one type are often necessary, Alphacool also offers six-packs. Technical dataDimensions (height x diameter)27 x 20mmWeight30gMaterialBrassThread1/4"Tube connection13/10mmColorwhiteWarranty: 5 years???? Warranty Terms

Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: 90° Socket 13/10mm This connector has a ¼” thread on one side and is thereby compatible with 95% of components. The other side fits a 13/10mm hose. The middle of this connector is turned at a 90° angle in order to prevent complicated hose connections. The threaded side is rotatable for maximum flexibility. Technical Specifications: Material: Brass Colour: Chrome Dimensions: Length: 34.5mm Width: 20mm Height: 33mm Scope of Delivery: 1x Alphacool Eiszapfen 13/10mm compression fitting 90° rotatable G1/4 - chrome

Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The connecting nut’s slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: Straight Socket 13/10mm This connector has a ¼” thread on one side and is thereby compatible with 95% of components. The other side fits a 13/10mm hose. Technical Specifications: Material: Brass Colour: Deep Black Dimensions: Diameter: 20mm Height: 27mm Scope of Delivery: 1x Alphacool Eiszapfen 13/10mm compression fitting G1/4 - deep black

Schlauch-Adapter für Wasserkühlungen, G1/4 Zoll auf 13/10 Schlauchanschnluss

Alphacools Eiszapfen Fitting series is the high-end version of the proven compression fitting! All requirements that are placed on a fitting are met here: Highflow, shape, processing and color scheme. Uncompromising development and manufacturing have made the Eiszapfen what they are. In brilliant white, they blend excellently into any system. Special processes are used to bond the coatings firmly to the substrate. The longevity of the intense colors is thus given and chipping of the coating is prevented. Each fitting has the Alphacool logo which makes it unmistakable in addition to its special shape! The beveled edges of the compression nut press the O-ring tightly against the hose, keeping it securely in place. Technical Specifications: Material: Brass Colour: Crome Dimensions: Diameter: 20mm Height: 27mm Scope of Delivery: 1x Alphacool Eiszapfen 13/10mm compression fitting G1/4 - Chrome

Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings! Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! Model: 90° Socket 13/10mm This connector has a G¼” thread on one side and is thereby compatible with 95% of components. The other side fits a 13/10mm hose. The middle of this connector is turned at a 90° angle in order to prevent complicated hose connections. The threaded side is rotatable for maximum flexibility. Technical data Material brass L x W x H 34,5 x 20 x 33mm Threads G1/4" OT | 13/10mm (ID 3/8" OD 1/2") Thread length 5mm Possible rotation 360° Version 90° angled Color chrome

Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings!Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system.A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable!Model: 90° Socket 13/10mmThis connector has a G¼” thread on one side and is thereby compatible with 95% of components. The other side fits a 13/10mm hose. The middle of this connector is turned at a 90° angle in order to prevent complicated hose connections. The threaded side is rotatable for maximum flexibility. Technical dataMaterialbrassL x W x H34,5 x 20 x 33mmThreadsG1/4" OT | 13/10mm (ID 3/8" OD 1/2")Thread length5mmPossible rotation360°Version90° angledColorblackWarranty: 5 years???? Warranty Terms

Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: 90° Socket 13/10mmThis connector has a ¼” thread on one side and is thereby compatible with 95% of components. The other side fits a 13/10mm hose. The middle of this connector is turned at a 90° angle in order to prevent complicated hose connections. The threaded side is rotatable for maximum flexibility. Technical Specifications: Material: Brass Colour: Deep Black Dimensions: Length: 34,5mm Widht: 20mm Hight: 33mm Scope of Delivery: 1x Alphacool Eiszapfen 13/10mm compression fitting 90° rotatable G1/4 - deep black

Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The connecting nut’s slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: Straight Socket 13/10mmThis connector has a ¼” thread on one side and is thereby compatible with 95% of components. The other side fits a 13/10mm hose. Sixpack:Since six connectors of one type are frequently required, Alphacool now offers sixpacks. This has many advantages to your benefit! Technical Specifications: Material: Brass Colour: Chrome Dimensions: Diameter: 20mm Height: 27mm Scope of Delivery: 1x Alphacool Eiszapfen 13/10mm compression fitting G1/4 - Chrome sixpack

Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The connecting nut’s slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: Straight Socket 13/10mmThis connector has a ¼” thread on one side and is thereby compatible with 95% of components. The other side fits a 13/10mm hose. Sixpack:Since six connectors of one type are frequently required, Alphacool now offers sixpacks. This has many advantages to your benefit! Technical Specifications: Material: Brass Colour: Deep Black Dimensions: Diameter: 20mm Height: 27mm Scope of Delivery: 1x Alphacool Eiszapfen 13/10mm compression fitting G1/4 - deep black sixpack

90-Grad-Anschraubtülle für Wasserkühlungen, 13 mm Hardtubeanschluss auf G1/4 Zoll AG, drehbar, für Messing- und Acryl-Hardtubes

Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings! Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The union nut's slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Model: 45° compression fitting 13mm plexi / brass tubesThis fitting is suitable for 13mm plexi or brass tubes on both sides. This fitting is bent 45° in the middle to avoid complicated hose connections. Technical Specifications Material: brass Colour: deep black Dimensions Length: 46mm Width: 20mm Height: 33mm Scope of Delivery 1x Alphacool Eiszapfen 13mm HardTube compression fitting 45° L-connector for plexi- brass tubes - deep black Fitting MapYou can find an interactive map of all Alphacool fittings here.

Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings! Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The union nut's slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Model: 45° compression fitting 13mmThis fitting has a 1/4" thread on one side and is thereby compatible with 95% of components. The other side fits a 13mm acrylic or brass tube. This fitting is bent 45° in the middle to avoid complicated hose connections. The threaded side is rotatable for maximum flexibility. Technical Specifications Material: brass Colour: chrome Dimensions Length: 44.5mm Width: 21mm Scope of Delivery 1x Alphacool Eiszapfen 13mm HardTube compression fitting 45° rotatable G1/4 for plexi- brass tubes - chrome Fitting MapYou can find an interactive map of all Alphacool fittings here.

Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings!Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system.A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable!The union nut's slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport.Model: 90° compression fitting 13mmThis fitting has a G1/4" thread on one side and is thereby compatible with 95% of components. The other side fits a 13mm acrylic or brass tube. This fitting is bent 90° in the middle to avoid complicated hose connections. The threaded side is rotatable for maximum flexibility. Technical dataMaterialbrassL x W42,5 x 21mmThreadsG1/4" OT | 13mm (OD 1/2")Thread length5mmPossible rotation360°Version90° angledColorchromeWarranty: 5 years???? Warranty Terms

Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The connecting nut’s slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: HardTube Socket 13mmThis connector has a ¼” external screw thread on one side. The other side fits HardTubes with an external diameter of 13mm. Technical Specifications: Material: Brass Colour: Chrome Dimensions: Diameter: 21mm Height: 16mm Scope of Delivery: 1x Alphacool Eiszapfen 13mm HardTube compression fitting G1/4 for plexi- brass tubes (rigid or hard tubes) - knurled - chrome

Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The connecting nut’s slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: HardTube Socket 13mmThis connector has a ¼” external screw thread on one side. The other side fits HardTubes with an external diameter of 13mm. Technical Specifications: Material: Brass Colour: Deep Black Dimensions: Diameter: 21mm Height: 16mm Scope of Delivery: 1x Alphacool Eiszapfen 13mm HardTube compression fitting G1/4 for plexi- brass tubes (rigid or hard tubes) - knurled - deep black

Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings! Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The union nut's slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Model: 45° compression fitting 13mmThis fitting has a 1/4" thread on one side and is thereby compatible with 95% of components. The other side fits a 13mm acrylic or brass tube. This fitting is bent 45° in the middle to avoid complicated hose connections. The threaded side is rotatable for maximum flexibility. Technical Specifications Material: brass Colour: deep black Dimensions Length: 44.5mm Width: 21mm Scope of Delivery 1x Alphacool Eiszapfen 13mm HardTube compression fitting 45° rotatable G1/4 for plexi- brass tubes - deep black Fitting MapYou can find an interactive map of all Alphacool fittings here.

With the Alphacool Eiszapfen you connect your hardtubes at the perfect 90° angle. The hardtube is tightly screwed to the union nut, seals immediately and can be easily loosened with one hand. Technical Details: Width: 21 mm Length: 34 mm Height: 34 mm Material: brass Color: Chrome

With the Alphacool Eiszapfen you connect your hardtubes at the perfect 90° angle. The hardtube is tightly screwed to the union nut, seals immediately and can be easily loosened with one hand. The fitting can be rotated freely (360°) thanks to the 90° angle. The possibilities are almost limitless. Technical Details Width: 34 mm Length: 34 mm Material: brass Color: Deep Black

Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings! Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The union nut's slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Model: 90° compression fitting 13mmThis fitting has a 1/4" thread on one side and is thereby compatible with 95% of components. The other side fits a 13mm acrylic or brass tube. This fitting is bent 90° in the middle to avoid complicated hose connections. The threaded side is rotatable for maximum flexibility. Technical Specifications Material: brass Colour: chrome Dimensions Length: 42.5mm Width: 21mm Scope of Delivery 1x Alphacool Eiszapfen 13mm HardTube compression fitting 90° rotatable G1/4 for plexi- brass tubes - chrome Fitting MapYou can find an interactive map of all Alphacool fittings here.

Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings! Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The union nut's slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Model: 90° compression fitting 13mmThis fitting has a 1/4" thread on one side and is thereby compatible with 95% of components. The other side fits a 13mm acrylic or brass tube. This fitting is bent 90° in the middle to avoid complicated hose connections. The threaded side is rotatable for maximum flexibility. Technical Specifications Material: brass Colour: deep black Dimensions Length: 42.5mm Width: 21mm Scope of Delivery 1x Alphacool Eiszapfen 13mm HardTube compression fitting 90° rotatable G1/4 for plexi- brass tubes - deep black Fitting MapYou can find an interactive map of all Alphacool fittings here.

Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings!Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system.A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable!The union nut's slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport.Model: 90° compression fitting 13mmThis fitting has a G1/4" thread on one side and is thereby compatible with 95% of components. The other side fits a 13mm acrylic or brass tube. This fitting is bent 90° in the middle to avoid complicated hose connections. The threaded side is rotatable for maximum flexibility. Technical dataMaterialbrassL x W42,5 x 21mmThreadsG1/4" OT | 13mm (OD 1/2")Thread length5mmPossible rotation360°Version90° angledColorblackWarranty: 5 years???? Warranty Terms

Anschraubtülle für Hadtubes, 13 mm Außendurchmesser, G¼-Gewinde, für Acryl- und Messingrohre, 6er Pack

Anschraubtülle für Hadtubes, 13 mm Außendurchmesser, G¼-Gewinde, für Acryl- und Messingrohre, 6er Pack

The Alphacool Eiszapfen HardTube fittings are among the most popular HardTube water cooling fittings on the market. They are characterized by their high processing quality and the triple sealing system.High quality coatingAlphacool uses advanced chromating to apply the paint to the brass connection. This not only makes the paint more even; it is also much more durable and resistant to external influences. The small Alphacool logo is lasered in and not printed. Therefore, it cannot be removed by friction.Triple sealTightness is essential for a water loop. Alphacool uses three sealing O-rings for these Eiszapfen fittings which seal against the Tube. Two O-rings are integrated in the fitting, while the third O-ring serves as a seal and is attached together with the HardTube. The union nut compresses the O-ring ensuring a tight seal. This not only provides a triple lock, but also increases the tensile strength of the HardTube. This means that it requires considerable force to pull the HardTube out of a tightened fitting.AssemblyRemove the union nut together with the O-ring inside. The connection is then screwed to any component with G1/4" thread. Insert deburred HardTube then put the O-ring and the union nut over them. The last step is to screw the union nut to the fitting.Technical data:L x D: 22.2 x 22 mmThread length: 5 mmMaterial: BrassConnection thread: G1/4".Colour: ChromeCompatible with all HardTubes with 14mm outer diameter.Download data sheet PDF: Alphacool Eiszapfen 14mm HardTube compression fitting G1/4 - knurled - chrome

The Alphacool Eiszapfen HardTube fittings are among the most popular HardTube water cooling fittings on the market. They are characterized by their high processing quality and the triple sealing system.High quality coatingAlphacool uses advanced chromating to apply the paint to the brass connection. This not only makes the paint more even; it is also much more durable and resistant to external influences. The small Alphacool logo is lasered in and not printed. Therefore, it cannot be removed by friction.Triple sealTightness is essential for a water loop. Alphacool uses three sealing O-rings for these Eiszapfen fittings which seal against the Tube. Two O-rings are integrated in the fitting, while the third O-ring serves as a seal and is attached together with the HardTube. The union nut compresses the O-ring ensuring a tight seal. This not only provides a triple lock, but also increases the tensile strength of the HardTube. This means that it requires considerable force to pull the HardTube out of a tightened fitting.AssemblyRemove the union nut together with the O-ring inside. The connection is then screwed to any component with G1/4" thread. Insert deburred HardTube then put the O-ring and the union nut over them. The last step is to screw the union nut to the fitting.L x D: 22.2 x 22 mmThread length: 5 mmMaterial: BrassConnection thread: G1/4".Colour: ChromeCompatible with all HardTubes with 14mm outer diameter.Download data sheet PDF: Alphacool Eiszapfen 14mm HardTube compression fitting G1/4 - knurled - chrome sixpack

The Alphacool Eiszapfen HardTube fittings are among the most popular HardTube water cooling fittings on the market. They are characterized by their high processing quality and the triple sealing system.High quality coatingAlphacool uses advanced chromating to apply the paint to the brass connection. This not only makes the paint more even; it is also much more durable and resistant to external influences. The small Alphacool logo is lasered in and not printed. Therefore, it cannot be removed by friction.Triple sealTightness is essential for a water loop. Alphacool uses three sealing O-rings for these Eiszapfen fittings which seal against the Tube. Two O-rings are integrated in the fitting, while the third O-ring serves as a seal and is attached together with the HardTube. The union nut compresses the O-ring ensuring a tight seal. This not only provides a triple lock, but also increases the tensile strength of the HardTube. This means that it requires considerable force to pull the HardTube out of a tightened fitting.AssemblyRemove the union nut together with the O-ring inside. The connection is then screwed to any component with G1/4" thread. Insert deburred HardTube then put the O-ring and the union nut over them. The last step is to screw the union nut to the fitting.Technical data:L x D: 22.2 x 22 mmThread length: 5 mmMaterial: BrassConnection thread: G1/4".Colour: BlackCompatible with all HardTubes with 14mm outer diameter.Download data sheet PDF: Alphacool Eiszapfen 14mm HardTube compression fitting G1/4 - knurled - deep black

Schlauch-Adapter für Wasserkühlungen, G1/4 Zoll auf 16/10 Schlauchanschnluss

6er Set Schlauch-Adapter für Wasserkühlungen, G1/4 Zoll auf 16/10 Schlauchanschnluss

Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The connecting nut’s slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: Straight Socket 16/10mm. This connector has a ¼” thread on one side and is thereby compatible with 95% of components. The other side fits a 16/10mm hose. Sixpack: Since six connectors of one type are frequently required, Alphacool now offers sixpacks. This has many advantages to your benefit! Technical Specifications: - Material: Brass - Colour: Deep Black Dimensions: - Diameter: 22mm - Height: 27mm Scope of Delivery: - 1x Alphacool Eiszapfen 16/10mm compression fitting G1/4 - deep black sixpack

Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The connecting nut’s slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: Straight Socket 16/10mm This connector has a ¼” thread on one side and is thereby compatible with 95% of components. The other side fits a 16/10mm hose. Technical Specifications: Material: Brass Colour: Deep Black Dimensions: Diameter: 22mm Height: 27mm Scope of Delivery: 1x Alphacool Eiszapfen 16/10mm compression fitting G1/4 - deep black

Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings!Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system.A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable!Model: 90° Socket 16/10mmThis connector has a G¼” thread on one side and is thereby compatible with 95% of components. The other side fits a 16/10mm hose. The middle of this connector is turned at a 90° angle in order to prevent complicated hose connections. The threaded side is rotatable for maximum flexibility. Technical dataMaterialbrassL x W x H35,5 x 22 x 34,5mmThreadsG1/4" OT | 16/10mm (ID 3/8" OD 5/8")Thread length5mmPossible rotation360°Version90° angledColorchromeWarranty: 5 years???? Warranty Terms

Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings!Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system.A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable!Model: 90° Socket 16/10mmThis connector has a G¼” thread on one side and is thereby compatible with 95% of components. The other side fits a 16/10mm hose. The middle of this connector is turned at a 90° angle in order to prevent complicated hose connections. The threaded side is rotatable for maximum flexibility. Technical dataMaterialbrassL x W x H35,5 x 22 x 34,5mmThreadsG1/4" OT | 16/10mm (ID 3/8" OD 5/8")Thread length5mmPossible rotation360°Version90° angledColorblackWarranty: 5 years???? Warranty Terms

Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The connecting nut’s slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: 90° Socket 16/10mmThis connector has a ¼” thread on one side and is thereby compatible with 95% of components. The other side fits a 16/10mm hose. The middle of this connector is turned at a 90° angle in order to prevent complicated hose connections. The threaded side is rotatable for maximum flexibility. Technical Specifications: Material: Brass Colour: Chrome Dimensions: Length: 35.5mm Width: 22mm Height: 34.5mm Scope of Delivery: 1x Alphacool Eiszapfen 16/10mm compression fitting 90° rotatable G1/4 - Chrome

Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The connecting nut’s slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: 90° Socket 16/10mmThis connector has a ¼” thread on one side and is thereby compatible with 95% of components. The other side fits a 16/10mm hose. The middle of this connector is turned at a 90° angle in order to prevent complicated hose connections. The threaded side is rotatable for maximum flexibility. Technical Specifications: Material: Brass Colour: Deep Black Dimensions: Length: 35.5mm Width: 22mm Height: 34.5mm Scope of Delivery: 1x Alphacool Eiszapfen 16/10mm compression fitting 90° rotatable G1/4 - deep black

Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The connecting nut’s slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: Straight Socket 16/10mmThis connector has a ¼” thread on one side and is thereby compatible with 95% of components. The other side fits a 16/10mm hose. Technical Specifications: Material: Brass Colour: Chrome Dimensions: Diameter: 22mm Height: 27mm Scope of Delivery: 1x Alphacool Eiszapfen 16/10mm compression fitting G1/4 - Chrome

Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The connecting nut’s slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: Straight Socket 16/10mmThis connector has a ¼” thread on one side and is thereby compatible with 95% of components. The other side fits a 16/10mm hose. Sixpack:Since six connectors of one type are frequently required, Alphacool now offers sixpacks. This has many advantages to your benefit! Technical Specifications: Material: Brass Colour: Chrome Dimensions: Diameter: 22mm Height: 27mm Scope of Delivery: 1x Alphacool Eiszapfen 16/10mm compression fitting G1/4 - Chrome sixpack

90-degree screw-on fitting for water cooling, 16 mm hard tube connection to G1/4 inch male thread, rotatable, for brass and acrylic hard tubes

Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings! Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The union nut's slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Model: 45° compression fitting 16mm plexi / brass tubesThis fitting is suitable for 16mm plexi or brass tubes on both sides. This fitting is bent 45° in the middle to avoid complicated hose connections. Technical Specifications Material: brass Colour: chrome Dimensions Length: 46mm Width: 23mm Height: 36mm Scope of Delivery 1x Alphacool Eiszapfen 16mm HardTube compression fitting 45° L-connector for plexi- brass tubes - chrome Fitting MapYou can find an interactive map of all Alphacool fittings here.

Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings! Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The union nut's slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Model: 45° compression fitting 16mm plexi / brass tubesThis fitting is suitable for 16mm plexi or brass tubes on both sides. This fitting is bent 45° in the middle to avoid complicated hose connections. Technical Specifications Material: brass Colour: deep black Dimensions Length: 46mm Width: 23mm Height: 36mm Scope of Delivery 1x Alphacool Eiszapfen 16mm HardTube compression fitting 45° L-connector for plexi- brass tubes - deep black Fitting MapYou can find an interactive map of all Alphacool fittings here.

Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings! Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The union nut's slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Model: 45° compression fitting 16mmThis fitting has a 1/4" thread on one side and is thereby compatible with 95% of components. The other side fits a 16mm acrylic or brass tube. This fitting is bent 45° in the middle to avoid complicated hose connections. The threaded side is rotatable for maximum flexibility. Technical Specifications Material: brass Colour: chrome Dimensions Length: 46mm Width: 23mm Scope of Delivery 1x Alphacool Eiszapfen 16mm HardTube compression fitting 45° rotatable G1/4 for plexi- brass tubes - chrome Fitting MapYou can find an interactive map of all Alphacool fittings here.

Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings! Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The union nut's slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Model: 45° compression fitting 16mmThis fitting has a 1/4" thread on one side and is thereby compatible with 95% of components. The other side fits a 16mm acrylic or brass tube. This fitting is bent 45° in the middle to avoid complicated hose connections. The threaded side is rotatable for maximum flexibility. Technical Specifications Material: brass Colour: deep black Dimensions Length: 46mm Width: 23mm Scope of Delivery 1x Alphacool Eiszapfen 16mm HardTube compression fitting 45° rotatable G1/4 for plexi- brass tubes - deep black Fitting MapYou can find an interactive map of all Alphacool fittings here.