Arvutitark OÜ

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)120 x 20 x 1,5mmThermal Conductivity (ASTM D5470)16.6 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)5×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)5 KV/mm (±10%)Density (ASTM D792)3.6 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colordark grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)120 x 20 x 1mmThermal Conductivity (ASTM D5470)16.6 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)5×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)5 KV/mm (±10%)Density (ASTM D792)3.6 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colordark grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)100 x 100 x 0,5mmThermal Conductivity (ASTM D5470)17.8 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)6×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)4 KV/mm (±10%)Density (ASTM D792)3.5 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorlight grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)100 x 100 x 1,5mmThermal Conductivity (ASTM D5470)17.8 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)6×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)4 KV/mm (±10%)Density (ASTM D792)3.5 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorlight grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)100 x 100 x 1mmThermal Conductivity (ASTM D5470)17.8 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)6×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)4 KV/mm (±10%)Density (ASTM D792)3.5 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorlight grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)120 x 20 x 0,5mmThermal Conductivity (ASTM D5470)17.8 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)6×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)4 KV/mm (±10%)Density (ASTM D792)3.5 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorlight grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)120 x 20 x 1,5mmThermal Conductivity (ASTM D5470)17.8 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)6×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)4 KV/mm (±10%)Density (ASTM D792)3.5 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorlight grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)120 x 20 x 1mmThermal Conductivity (ASTM D5470)17.8 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)6×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)4 KV/mm (±10%)Density (ASTM D792)3.5 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorlight grey

Alphacool Apex Thermal Putty – The Flexible High-End Alternative to Thermal Pads Alphacool Apex Thermal Putty is a high-performance thermal compound specifically engineered for cooling and protecting sensitive electronic components. As a non-curing, electrically non-conductive silicone gel, it provides the perfect solution for reliably bridging gaps and tolerances between heat sinks and hardware. Why Choose Apex Thermal Putty? Maximum Flexibility: Thanks to its gel-like consistency, the putty adapts perfectly to varying gap heights under slight pressure – ideal for memory chips (VRAM) and voltage regulators. Mechanical Protection: Unlike rigid pads, mechanical pressure on components is minimized, effectively preventing damage to sensitive hardware. Low Thermal Resistance: The optimized formula allows for an extremely thin Bond Line Thickness (BLT), significantly improving heat dissipation compared to conventional solutions. Long-Term Stability: High vertical stability ensures the material won't sag, dry out, or crack. Adjacent components remain clean and protected. Technical Highlights: Electrically Non-Conductive: No risk of short circuits when in contact with traces or components. Form-Stable: Stays exactly where applied, even at high temperatures and in vertical mounting positions. Applications: Perfect for modern graphics cards, consoles, and industrial applications with high thermal demands.

Alphacool Apex Thermal Putty – The Flexible High-End Alternative to Thermal Pads Alphacool Apex Thermal Putty is a high-performance thermal compound specifically engineered for cooling and protecting sensitive electronic components. As a non-curing, electrically non-conductive silicone gel, it provides the perfect solution for reliably bridging gaps and tolerances between heat sinks and hardware. Why Choose Apex Thermal Putty? Maximum Flexibility: Thanks to its gel-like consistency, the putty adapts perfectly to varying gap heights under slight pressure – ideal for memory chips (VRAM) and voltage regulators. Mechanical Protection: Unlike rigid pads, mechanical pressure on components is minimized, effectively preventing damage to sensitive hardware. Low Thermal Resistance: The optimized formula allows for an extremely thin Bond Line Thickness (BLT), significantly improving heat dissipation compared to conventional solutions. Long-Term Stability: High vertical stability ensures the material won't sag, dry out, or crack. Adjacent components remain clean and protected. Technical Highlights: Electrically Non-Conductive: No risk of short circuits when in contact with traces or components. Form-Stable: Stays exactly where applied, even at high temperatures and in vertical mounting positions. Applications: Perfect for modern graphics cards, consoles, and industrial applications with high thermal demands.

Sleeved extension cable for 3-pin ARGB, 15 cm length, with socket and plug.

Sleeved extension cable for 3-Pin ARGB, 30 cm length, with socket and plug.

The Alphacool Y-Splitter aRGB 3-Pin to 4x 3-Pin 15cm cable in black is designed for ARGB accessories (3-Pin / 5 V). This 15 cm long cable allows you to connect up to four ARGB elements, making it ideal for customizing your PC's lighting setup. It is compatible with various manufacturers and motherboards, ensuring versatile use. With a net weight of 0.021 kg, it is a lightweight and efficient solution for your ARGB needs.

The Alphacool Aurora Flexlight RGBW-LEDs are the ideal solution for illuminating your PC, especially for modding purposes. RGBW LEDs surpass standard RGB LEDs in both color and brightness. Of course, RGBW LED strips can also be used to light up various other areas in your home, such as creating mood lighting in the living room, under-bed lighting in the bedroom, or illuminating cabinets.

With the Alphacool Aurora Vertical GPU mount including riser cable, a graphics card can be installed vertically in common PC cases. The mount features 11 individually controllable 5V aRGB LEDs that create unique lighting effects.MountingFor this, six of the existing slot covers on the back of the case must be removed. The GPU mount including the already mounted graphics card is positioned in the area of the removed slot covers and screwed into the case using the included support clamp and the M3x6 screws.Brilliant lightingIn the lower part of the bracket 11 digitally addressable 5V RGB LEDs are installed, which create a unique, very noble looking illumination. The Digital aRGB LED illumination is connected via a JST 3-pin connector. To control the digital RGB lighting, the included adapter must be plugged into the 3-pin female connector and connected to a digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360, not included) or a digital RGB capable motherboard. The remaining 3-pin male connector can be used to connect additional digital RGB LEDs. Technical dataDimensions (L x W x H)241,5 x 133 x 72 mmMaterialstainless steel, acrylicPCI slots required6LED type5V aRGBLED connection3-pin JST (approx. 410 mm cable length)LED quantity11Compatibility PCI riser cablePCI-E 3.0 x16Length PCI riser cable250 mmWeight752 gColorblack

Highlights super easy installation 15 RGB LEDs for perfect lighting compatible with all standard RGB controllers intended for Eisblock XPX satin or clear CPU cooler The Alphacool XPX RGB frame is intended for users of the Eisblock XPX CPU cooler who are looking for the perfect lighting for their cooler. The RGB frame simply slides over the Eisblock XPX cooler and is then connected to the RGB controller. With an impressive 15 RGB LEDs evenly distributed over the XPX Eisblock CPU cooler, perfect lighting is guaranteed. The RGB controller lets you change not only the colours, but also add colour effects like gradients, blinking, slow colour changes, and much more. Many controllers also include a dimmer function. The Alphacool XPX RGB frame leaves nothing to be desired. With the 4Pin 12V RGB plug, all Alphacool RGB products are compatible with the current RGB-sync technologies of all prominent mainboard manufacturers (ASUS, AROCK, MSI, and GIGABYTE). Technical Details Dimensions: 75 x 75 x 17mm Cable length: 40cm power connection: RGB male material: POM, soft touch surface number of LEDs: 15 controlling: RGB Controller (available separately) Scope of Delivery 1x Alphacool Aurora XPX RGB frame - black Datasheet

The Alphacool Bubble Down is a spare part for various Alphacool expansion tanks with integrated pump top. It prevents the pump from sucking air out of the expansion tank which can lead to unpleasant noises. Furthermore, a pump can also be damaged by too much sucked air.

Alphacools's fittings go new ways in looks, quality of manufacturing, colours and choice. The inner diameter of these fittings truly deserves the „high flow“ attribute! The first three colours, Chrome, Deep Black and Shiny Copper offer something for every taste. The product matching series are designed to look elegant in every system, highlighting the individual design of the computer. The limits are endless with these Alphacool fittings in combination with Alphacool tubing! With a new process during chromatising the surface finish is completely connected with the brass body, hence ensuring permanent intense colours and peeling of the chrome layer. The Alphacool name in blue lettering on some of the fittings additionally underlines the individuality of these items. Functionality of this connector:A bushing with two 1/4“ inner threads comes in handy for the extension of fittings or for connection of a component with an outer thread to a fitting. Technical specifications:Material: Brass, chromatizedColour: Deep Black Dimensions:Length: 22mmWidth: D17mm Extent of delivery:1 x Alphacool HF socket 2 x G1/4 inner thread - Deep Black This product has been reviewed for you:ModdingbaseXtremesystems (Engl.) (userreview)PT-reviews (Pt)

Replacement bottom for the Alphacool Cape Corp Coolplex expansion tank, designed for industrial applications with high pressures.Technical data:Material: POMDiameter: 50mmConnections: 3x G1/4"Scope of delivery:1x Alphacool Cape Coolplex Base POM 3 BarNote: O-ring not included!

The design has proven itself for a long time: The frosted transparent material is perfect for clear tube reservoirs and keeps the focus on the important parts. But his hard plastic used to be rather sensitive if treated incorrectly. This is now over! The new material mix is now even more sturdy and handles shearing forces much better, allowing hassle-free mounting. Technical specifications:Material: Hard plasticColour: Frosted transparentInner diameter: 50mmScrew hole size: M4 Extent of delivery:2x Alphacool Cape Coolplex Plexiglas mount, 1 piece 50mm Please note: For mounting additional screws are required. We recommend ordering Item No. 46023.

Alphacool's new check valve ideal for Numerous Applications. When for example two pumps are operating in one loop the check valve prevents backflow through a stopped pump. When integrated directly behind the pump into the loop this valve also eases filling and deaeration. Technical data:Material: MSVDimensions L x D: 39 x 17,1mmConnection: G1 / 4 "Scope of delivery:1x Alphacool check valve G1 / 4 - Deep Black

Alphacool presents the Core 1, a new generation of CPU water cooling. The latest desktop processors are continuously becoming more powerful, but also produce more and more waste heat. The Core 1 reliably solves this problem with the help of its entirely new 3D-Jetplate, which is also used in industrial applications. The all-metal CPU water cooler not only impresses with its elegant appearance, but also features a new mounting system that simplifies installation.The best of new and oldAlphacool brings the best of both worlds together with the Core 1. In addition to the new 3D-Jetplate, Alphacool returns to its roots by using a proven cross-slot technique to distribute coolant evenly across the redesigned cooler base. Inside the cooler, O-rings ensure precise water flow for effective cooling. The Core 1's housing is machined from a high-quality brass block and features nickel-plated connectors. The cooler's copper base, also nickel-plated, has been enlarged to ensure full coverage of large CPUs. New Mounting SystemThe mounting system has also been revised. Compared to previous Alphacool models, it requires fewer screws. First, the pre-assembly of the backplate (Intel) is done with four spacers. After that, the thermal paste is applied to the CPU. Then, the matching mounting frame is put on the CPU cooler and fastened with four nuts on the spacers.Core DesignThe functional and elegant design is a key element of Alphacool's Core series. The nickel-plated connectors and the discreet contour line stand out from the high-quality brass housing. The rounded corners add the perfect touch to the overall look. The Core 1 is available in various color designs, as well as in discreetly illuminated aRGB Aurora models. Compatibility:AMD: AM4 / AM5Intel: LGA 1700 / LGA 1851 Technical dataDimensions (L x W x H)72 x 72 x 26,50mmMaterial coolernickel plated copperMaterial cooler topBrassMaterial threadsnickel plated BrassThreads2 x G1/4“Power supply Digital RGB3-Pin 5VQuantity digital aRGB LEDs18Fin thickness0,4mmFin distance0,4mmPressure tested0,8 barMax working temperature60°CWeight500gColorsilverWarranty: 5 years Warranty Terms

High-quality CPU block for water cooling, compatible with AMD and Intel CPUs, very compact, with RGB lighting

Alphacool presents the Core 1, a new generation of CPU water cooling. The latest desktop processors are continuously becoming more powerful, but also produce more and more waste heat. The Core 1 reliably solves this problem with the help of its entirely new 3D-Jetplate, which is also used in industrial applications. The all-metal CPU water cooler not only impresses with its elegant appearance, but also features a new mounting system that simplifies installation.The best of new and oldAlphacool brings the best of both worlds together with the Core 1. In addition to the new 3D-Jetplate, Alphacool returns to its roots by using a proven cross-slot technique to distribute coolant evenly across the redesigned cooler base. Inside the cooler, O-rings ensure precise water flow for effective cooling. The Core 1's housing is machined from a high-quality brass block and features nickel-plated connectors. The cooler's copper base, also nickel-plated, has been enlarged to ensure full coverage of large CPUs. New Mounting SystemThe mounting system has also been revised. Compared to previous Alphacool models, it requires fewer screws. First, the pre-assembly of the backplate (Intel) is done with four spacers. After that, the thermal paste is applied to the CPU. Then, the matching mounting frame is put on the CPU cooler and fastened with four nuts on the spacers.Core DesignThe functional and elegant design is a key element of Alphacool's Core series. The nickel-plated connectors and the discreet contour line stand out from the high-quality brass housing. The rounded corners add the perfect touch to the overall look. The Core 1 is available in various color designs, as well as in discreetly illuminated aRGB Aurora models. Compatibility:AMD: AM4 / AM5Intel: LGA 1700 / LGA 1851 Technical dataDimensions (L x W x H)72 x 72 x 26,50mmMaterial coolernickel plated copperMaterial cooler topBrassMaterial threadsnickel plated BrassThreads2 x G1/4“Power supply Digital aRGB3-Pin 5VQuantity digital aRGB LEDs18Fin thickness0,4mmFin distance0,4mmPressure tested0,8 barMax working temperature60°CWeight500gColorblackWarranty: 5 years Warranty Terms

Alphacool presents the Core 1, a new generation of CPU water cooling. The latest desktop processors are continuously becoming more powerful, but also produce more and more waste heat. The Core 1 reliably solves this problem with the help of its entirely new 3D-Jetplate, which is also used in industrial applications. The all-metal CPU water cooler not only impresses with its elegant appearance, but also features a new mounting system that simplifies installation.The best of new and oldAlphacool brings the best of both worlds together with the Core 1. In addition to the new 3D-Jetplate, Alphacool returns to its roots by using a proven cross-slot technique to distribute coolant evenly across the redesigned cooler base. Inside the cooler, O-rings ensure precise water flow for effective cooling. The Core 1's housing is machined from a high-quality brass block and features nickel-plated connectors. The cooler's copper base, also nickel-plated, has been enlarged to ensure full coverage of large CPUs. New Mounting SystemThe mounting system has also been revised. Compared to previous Alphacool models, it requires fewer screws. First, the pre-assembly of the backplate (Intel) is done with four spacers. After that, the thermal paste is applied to the CPU. Then, the matching mounting frame is put on the CPU cooler and fastened with four nuts on the spacers.Core DesignThe functional and elegant design is a key element of Alphacool's Core series. The nickel-plated connectors and the discreet contour line stand out from the high-quality housing with carbon cover. The rounded corners add the perfect touch to the overall look. The Core 1 is available in various color designs, as well as in discreetly illuminated aRGB Aurora models. Compatibility:AMD: AM4 / AM5Intel: LGA 1700 Technical dataDimensions (L x W x H)72 x 72 x 26,50mmMaterial coolernickel plated copperMaterial cooler topBrass, CarbonMaterial threadsnickel plated BrassThreads2 x G1/4“Power supply Digital aRGB3-Pin 5VQuantity digital aRGB LEDs18Fin thickness0,4mmFin distance0,4mmPressure tested0,8 barMax working temperature60°CWeight500gColorblack, carbonWarranty: 5 years Warranty Terms

Alphacool presents the Core 1, a new generation of CPU water cooling. The latest desktop processors are continuously becoming more powerful, but also produce more and more waste heat. The Core 1 reliably solves this problem with the help of its entirely new 3D-Jetplate, which is also used in industrial applications. The all-metal CPU water cooler not only impresses with its elegant appearance, but also features a new mounting system that simplifies installation.The best of new and oldAlphacool brings the best of both worlds together with the Core 1. In addition to the new 3D-Jetplate, Alphacool returns to its roots by using a proven cross-slot technique to distribute coolant evenly across the redesigned cooler base. Inside the cooler, O-rings ensure precise water flow for effective cooling. The Core 1's housing is machined from a high-quality brass block and features nickel-plated connectors. The cooler's copper base, also nickel-plated, has been enlarged to ensure full coverage of large CPUs. New Mounting SystemThe mounting system has also been revised. Compared to previous Alphacool models, it requires fewer screws. First, the pre-assembly of the backplate (Intel) is done with four spacers. After that, the thermal paste is applied to the CPU. Then, the matching mounting frame is put on the CPU cooler and fastened with four nuts on the spacers.Core DesignThe functional and elegant design is a key element of Alphacool's Core series. The nickel-plated connectors and the discreet contour line stand out from the high-quality housing with carbon cover. The rounded corners add the perfect touch to the overall look. The Core 1 is available in various color designs, as well as in discreetly illuminated aRGB Aurora models. Compatibility:AMD: AM4 / AM5Intel: LGA 1700 Technical dataDimensions (L x W x H)72 x 72 x 26,50mmMaterial coolernickel plated copperMaterial cooler topBrass, CarbonMaterial threadsnickel plated BrassThreads2 x G1/4“Fin thickness0,4mmFin distance0,4mmPressure tested0,8 barMax working temperature60°CWeight540gColorblack, carbonWarranty: 5 years Warranty Terms

The Alphacool Core 1 is a new generation of CPU water cooling and is suitable for Intel and AMD processors. The copper cooler base of the completely newly developed 3D Jetplate is nickel-plated and is also used in industry. Made entirely of metal, the CPU water cooler not only impresses with its elegant design, but also features a new mounting system that makes installation easier.

With the Core 1 LT, Alphacool introduces the lightweight version of the proven Core 1 CPU water block. Encased in a polymer housing, the Core 1 LT utilizes the reliable combination of 3D jetplate and cross-slot technology, enabling it to efficiently dissipate the substantial heat generated by the latest desktop processors. Its elegant design allows it to integrate seamlessly into any water cooling setup. The new mounting system is included, making installation with Intel and AMD processors even easier.The best of new and oldAlphacool brings together the best of both worlds with the Core 1 water block series. Alongside the innovative 3D jetplate, Alphacool returns to its roots with proven cross-slot technology, evenly distributing coolant across the redesigned cooler base. High-quality O-rings inside the block ensure precise water flow for optimal cooling performance. The enlarged nickel-plated copper base guarantees full coverage for large CPUs.New Mounting SystemThe mounting system has been redesigned to require fewer screws compared to previous Alphacool models. Installation begins with pre-assembling the backplate (for Intel) using four spacers. Next, thermal paste is applied to the CPU. The appropriate mounting bracket is then placed on the CPU block and secured with four nuts on the spacers.Core DesignA functional yet elegant appearance is central to the Alphacool Core series, focusing on strong cooling performance at a fair price. Rounded corners provide the perfect finishing touch to its overall look. The Core 1 LT is available in both non-illuminated and transparent aRGB versions. Technical dataDimensions (L x W x H)71.80 x 71.80 x 28.05mmMaterial coolernickel plated copperMaterial cooler topacrylicMaterial threadsacrylicThreads2 x G1/4“Fin thickness0.4mmFin distance0.4mmPressure tested0.8 barMax working temperature60°CWeight250gColortransparent/blackWarranty: 5 years Warranty Terms

With the Core 1 LT, Alphacool presents the light version of the proven Core 1 CPU water cooler. Housed in a polymer casing, the Core 1 LT also uses the reliable combination of 3D jetplate and cross slot-technology. This enables it to effectively dissipate the enormous waste heat of the latest desktop processors. With its elegant design, it integrates seamlessly into any water cooling system. The new mounting system is also included and simplifies installation with Intel and AMD processors.The best of new and oldAlphacool combines the best of both worlds with the Core 1 water cooler series. In addition to the new 3D jetplate, Alphacool returns to its roots by distributing the coolant evenly across the redesigned cooler base using proven cross-slot technology. Inside the cooler, O-rings ensure a precise water flow and thus guarantee effective cooling. The nickel-plated copper base of the cooler has been enlarged to achieve full coverage of large CPUs. New Mounting SystemThe mounting system has also been revised. Compared to previous Alphacool models, it requires fewer screws. First, the pre-assembly of the backplate (Intel) is done with four spacers. After that, the thermal paste is applied to the CPU. Then, the matching mounting frame is put on the CPU cooler and fastened with four nuts on the spacers.Core DesignThe functional and elegant design is a central element of the Core series from Alphacool. Its focus is on cooling performance at a fair price. The rounded corners add the perfect touch to the overall look. The Core 1 LT is available in both non-illuminated and transparent aRGB versions. Compatibility:AMD: AM4 / AM5Intel: LGA 1700 Technical dataDimensions (L x W x H)71.80 x 71.80 x 28.05mmMaterial coolernickel plated copperMaterial cooler topacetalMaterial threadsacetalThreads2x G1/4“Fin thickness0.4mmFin distance0.4mmPressure tested0.8 barMax working temperature60°CWeight250gColorblackWarranty: 5 years Warranty Terms

Alphacool presents the Core 1, a new generation of CPU water cooling. The latest desktop processors are continuously becoming more powerful, but also produce more and more waste heat. The Core 1 reliably solves this problem with the help of its entirely new 3D-Jetplate, which is also used in industrial applications. The all-metal CPU water cooler not only impresses with its elegant appearance, but also features a new mounting system that simplifies installation.The best of old and newAlphacool brings the best of both worlds together with the Core 1. In addition to the new 3D-Jetplate, Alphacool returns to its roots by using a proven cross-slot technique to distribute coolant evenly across the redesigned cooler base. Inside the cooler, O-rings ensure precise water flow for effective cooling. The Core 1's housing is machined from a high-quality brass block and features nickel-plated connectors. The cooler's copper base, also nickel-plated, has been enlarged to ensure full coverage of large CPUs. New Mounting SystemThe mounting system has also been revised. Compared to previous Alphacool models, it requires fewer screws. First, the pre-assembly of the backplate (Intel) is done with four spacers. After that, the thermal paste is applied to the CPU. Then, the matching mounting frame is put on the CPU cooler and fastened with four nuts on the spacers.Core DesignThe functional and elegant design is a key element of Alphacool's Core series. The nickel-plated connectors and the discreet contour line stand out from the high-quality brass housing. The rounded corners add the perfect touch to the overall look. The Core 1 is available in various color designs, as well as in discreetly illuminated aRGB Aurora models. Compatibility:AMD: AM4 / AM5Intel: LGA 1700 / LGA 1851 Technical dataDimensions (L x W x H)72 x 72 x 26,50mmMaterial Coolernickel plated copperMaterial cooler topBrassMaterial threadsnickel plated BrassThreads2 x G1/4“Fin thickness0,4mmFin distance0,4mmPressure tested0,8 barMax working temperature60°CWeight540gColorwhiteWarranty: 5 years Warranty Terms

The Alphacool Core reservoir has an integrated pump top for powerful D5 pumps and comes with a VPP Apex pump. The tube of the reservoir is made of acrylic, the D5/VPP pump top and the lid of acetal. The combination of these two materials gives the expansion tank a discreet appearance. The wow effect is provided by 12 digitally addressable RGB LEDs in the pump top and the Lighttower water effect inside the acrylic tube.What's new?Compared to the previous Eisbecher models, the acrylic tube of the Core reservoir has an external thread. This provides more stability and safety when connecting the lid and pump top to the tube. Also new is the integrated digital aRGB lighting. 12 digitally addressable RGB LEDs in the pump top are included in the scope of delivery of the Core reservoir and no longer have to be purchased separately. Extensive mounting optionsMounting option 1:Stands are included in the scope of delivery, which, among other things, allow the expansion tank to be mounted on the bottom of the enclosure. Mounting option 2:Included in the scope of delivery are 120mm/140mm mounting frames, which can be used to mount the Core expansion tank as desired on free fan spaces, radiators or on the fans on radiators.Digitally addressable RGB lighting12 digitally addressable RGB LEDs illuminate the aycryl tube of the reservoir. They are mounted in a ring at the lower end of the tube in the transition to the pump top and provide brilliant illumination of the entire expansion tank. In combination with the Lighttower water effect, a very special ambience is achieved. The digital aRGB LED lighting is connected via a JST 3-pin connector and can be controlled with a digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360) or a digital RGB capable mainboard.Lighttower water effectA special water effect is created in the core reservoir via the riser tubes. If you do not fill the reservoir beyond the top edge of the riser tube, you get a kind of fountain effect. In this case, the water is pushed out the sides of the riser tube and splashed against the glass tube. Depending on the flow of the circuit, the effect is stronger or weaker. The effect can be placed at the lower or upper inlet using the riser tubes included in the delivery.Pump compatibilityThe Alphacool Core expansion tank has an integrated pump top and is compatible with all original D5 pumps as well as all Alphacool VPP pumps. The pump retaining ring, a pump O-ring and all screws are included in the scope of delivery.PumpThe VPP Apex pump does without a spherical bearing and uses a ceramic shaft. The motor's coils have been moved from the inside to the outside. These changes have the effect that the pump is fundamentally more stable and smoother running, and any vibrations that arise have been significantlyreduced. Another positive side effect is that power consumption has been almost halved as a result. Compared to Alphacool's Eispumpe, the power is not supplied via a 4-pin Molex connector. Instead, the Apex VPP pump is connected to the power supply using a SATA connector. The Apex VPP pump has a 4-pin fan connector that connects to the motherboard or to an external controller. This allows you to control the speed range of the pump via PWM and read out the RPM signal. Technical dataL x W x H131 x 76,5 x 76,5 mmPump compatibilityD5Capacity200 mlMaterial Pump top & coveracetalMaterial tubeacrylicConnection3x G1/4“ internal threadMaximum working temperature60 °CPressure tested0,8 BarQuantity of digital aRGB LEDs12Power digital aRGB LEDs5VPower connector digital aRGB LEDs3-pin JST (male & female switch)Weight504 gColorblackTechnical data VPP ApexDimensions (L x W x H)65 x 65 x 41mmMaterial pumpsynthetic materialMaterial pump coveraluminiumMaterial axleceramicsConnections4-Pin PWM | SATARotational speed2500 - 4500 RPMCable lenghts4-Pin PWM - 48cm | SATA - 48cmOperating voltage8-13V DC / 14W IP32Starting voltage12V DCMaximum pumping head4,25 mMax flow340 l/hMax working temperature60 °CNet weight276 gcolorblack

Umfangreicher Hub/Splitter von Alphacool, mit 10x PWM-Lüfteranschlüssen (4-Pin), Stromversorgung per SATA, Signalsteuerung per Mainboard

Alphacool's Core 120mm is a quiet and efficient fan with a wide control range up to 2500 rpm. The PWM controllable fan is not only suitable as a fan on CPU coolers or radiators. Due to its excellent performance values (throughput & static pressure), it can also be used as a case fan. The hydraulically mounted fan axis is smooth running and enables a long service life as well as quiet operation. If you are looking for a powerful fan without aRGB illumination, you will find it in Alpacool's Core 120mm model!ConnectionsThe fan is controlled via a 4-pin PWM connector. The cable is 40cm long. This allows the fan to be connected directly to the motherboard or a dedicated controller without the use of additional adapter cables or extensions.Control rangeThe fan can be controlled from 0 to 2500 rpm via the 4-pin PWM connector. At maximum speed, it allows an airflow of 72.63 CFM combined with a high static pressure of 2.42 mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system or for ventilating a case. Technical dataDimension (L x W x H)120 x 120 x 25mmMaterialsynthetic material (PBT UL94V-0)Bearing Typehydraulic BearingRated VoltageDC 12VOperating VoltageDC 7-14VStart-up Voltage7VRated Current0.3 (Max: 0.4) ARated Power3.6 (Max: 4.8) WControl Range0 - 2500 rpm ±10%Max. Air Flow72.63 CFMMax. Static Pressure2.42 mm/H2ONoise level36.6 (Max: 37.8) dBALife Expectance50000 h at 25 degrees celciusConnection4-Pin PWMSpeed Control Modevia PWMOperating Temperature-10~+55 degrees celciusOther FeaturesTachometer Output, Auto Start, Soft Start, Waterproof Level IP22Warranty: 3 years Warranty Terms

The Alphacool Core Reservoir not only looks sleek with its aRGB lighting, but can also be used flexibly thanks to its compact size. The reservoir is made entirely of acrylic. The installation of a D5 or VPP pump is required for operation. Due to its compact design, the Core Reservior also fits into small cases.Core DesignA key element of Alphacool's Core Design series are the chrome-plated G1/4" connections made of brass. In the Core Reservoir, the connections are recessed rather than screwed into a thread, bypassing the problem of possible leaks due to cracking from the direct screwing of the connections into the acrylic. The connections are in two parts, fitted with an O-ring and counter each other when mounted in the acrylic. This not only ensures absolute sealing of each connection, but also allows for the clear and functional appearance of the Alphacool Core Design series.Easy installationWith the included Core Push Mounting kit, the Core Reservoir can be mounted on the case or on a radiator. The metal pins are attached to the radiator or case panel and the matching female sleeves are attached to the Reservoir (see manual). In the next installation step, the Reservoir is simply and tool-free pushed onto the pins. Alphacool's Push-Mounting allows for a secure fit of the reservoir on the case panel or on the radiator and allows for easy disassembly for maintenance or expansion projects.GamechangerThe Core Reservior is small and compact. This makes the reservoir ideal for custom water loops. An additional drain port is located on the side, allowing for easy and uncomplicated draining of the Reservoir.High-quality material selection & brilliant lightingAlphacool's Core Reservoir is made of high-quality acrylic glass, allowing for an unobstructed view of the coolant and brilliant illumination by the built-in digital addressable aRGB LEDs. The lighting can be controlled via a digital aRGB header on the motherboard or optionally through Alphacool's Aurora Eiscontrol aRGB controller (item number: 15360). Technical dataDimensions (L x W x H)120.00 x 125.00 x 78.00mmVolume (reservoir)approx. 65mlMaterialAcrylPump compatibilityD5/VPPThreads4x G1/4“ inner thread / 1x drain portMaximum working temperature60 °CPressure tested0.8 BarQuantity digital aRGB LEDs6Voltage digital aRGB LEDs5VPower connection digital aRGB LEDs3-Pin JST + 3-Pin 5VWeight940gColortransparentTechnical data pumpMaterial pumpsynthetic materialMaterial pump coveraluminiumMaterial axleceramicsConnections4-Pin PWM | SATARotational speed2500 - 4500 RPMCable lengths4-Pin PWM - 48cm | SATA - 48cmOperating voltage8-13V DC / 14W IP32Starting voltage12V DCMaximum pumping head4,25mMaximum flow rate340L/hMaximum working temperature60°CColorblackWarranty: 3 years Warranty Terms

Alphacool's Core 140mm is a quiet and efficient fan with a wide control range up to 2500 rpm. The PWM controllable fan is not only suitable as a fan on CPU coolers or radiators. Due to its excellent performance values (throughput & static pressure), it can also be used as a case fan. The double-bearing fan axis is smooth running and enables a long service life as well as quiet operation. If you are looking for a powerful fan without aRGB illumination, you will find it in Alpacool's Core 140mm model!ConnectionsThe fan is controlled via a 4-pin PWM connector. The cable is 40cm long. This allows the fan to be connected directly to the motherboard or a dedicated controller without the use of additional adapter cables or extensions.Control rangeThe fan can be controlled from 0 to 2500 rpm via the 4-pin PWM connector. At maximum speed, it allows an airflow of 115.56 CFM combined with a high static pressure of 3.96 mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system or for ventilating a case. Technical dataDimension (L x W x H)140 x 140 x 25mmMaterialsynthetic material (PBT UL94V-0)Bearing TypeTwo Ball BearingRated VoltageDC 12VOperating VoltageDC 7-14VStart-up Voltage7VRated Current0.4 (Max: 0.5) ARated Power4.8 (Max: 6.00) WRated Speed0 - 2500 rpm ±10%Max. Air Flow115.56 CFMMax. Static Pressure3.96 mm/H2ONoise level43.3 (Max: 45.0) dBALife Expectance70000 h at 40 degrees celciusConnection4-Pin PWMSpeed Control Modevia PWMOperating Temperature-10~+70 degrees celciusOther FeaturesTachometer Output, Auto Start, Soft Start, Waterproof Level IP22Warranty: 3 years Warranty Terms

The Alphacool Core Reservoir not only looks sleek with its aRGB lighting, but can also be used flexibly thanks to its compact size. The reservoir is made entirely of acrylic. The installation of a D5 or VPP pump is required for operation. Due to its compact design, the Core Reservior also fits into small cases.Core DesignA key element of Alphacool's Core Design series are the chrome-plated G1/4" connections made of brass. In the Core Reservoir, the connections are recessed rather than screwed into a thread, bypassing the problem of possible leaks due to cracking from the direct screwing of the connections into the acrylic. The connections are in two parts, fitted with an O-ring and counter each other when mounted in the acrylic. This not only ensures absolute sealing of each connection, but also allows for the clear and functional appearance of the Alphacool Core Design series.Easy installationWith the included Core Push Mounting kit, the Core Reservoir can be mounted on the case or on a radiator. The metal pins are attached to the radiator or case panel and the matching female sleeves are attached to the Reservoir (see manual). In the next installation step, the Reservoir is simply and tool-free pushed onto the pins. Alphacool's Push-Mounting allows for a secure fit of the reservoir on the case panel or on the radiator and allows for easy disassembly for maintenance or expansion projects.GamechangerThe Core Reservior is small and compact. This makes the reservoir ideal for custom water loops. An additional drain port is located on the side, allowing for easy and uncomplicated draining of the Reservoir.High-quality material selection & brilliant lightingAlphacool's Core Reservoir is made of high-quality acrylic glass, allowing for an unobstructed view of the coolant and brilliant illumination by the built-in digital addressable aRGB LEDs. The lighting can be controlled via a digital aRGB header on the motherboard or optionally through Alphacool's Aurora Eiscontrol aRGB controller (item number: 15360). Technical dataDimensions (L x W x H)140.00 x 145.00 x 62.00mmVolume (reservoir)approx. 130mlMaterialAcrylPump compatibilityD5/VPPThreads3x G1/4“ inner thread / 1x drain portMaximum working temperature60 °CPressure tested0.8 BarQuantity digital aRGB LEDs5Voltage digital aRGB LEDs5VPower connection digital aRGB LEDs3-Pin JST + 3-Pin 5VWeight840gColortransparentWarranty: 3 years Warranty Terms

Alphacool Core 2 LT 240mm CPU AiO – All-in-one liquid cooler for the processor Alphacool Core 2 LT 240mm CPU AiO is a closed-loop liquid cooler: pump, cold plate, tubing and radiator come pre-filled and sealed. That takes the filling and bleeding work out of liquid cooling while still moving the CPU heat to where there is room for a large radiator. The dimensions are 120 x 120 x 25 mm. The pump delivers up to 2100 ml/min ±10% with a maximum head of 1.4 m ±10%. Key Features PWM control: Speed can be matched to system load via the PWM signal from the motherboard or a controller. Pre-filled and maintenance-free: The loop is filled and sealed at the factory – no filling, no bleeding, no topping up. Radiator instead of a tower above the CPU: Heat travels through the tubing to the radiator and is released there rather than building up above the socket. PWM-controlled fans: Speed, and with it noise, follows the actual load via the motherboard. Fits common sockets: The supplied brackets cover the widespread Intel and AMD sockets. Technical Specifications TypeAlphacool Core 2 LT 240mm CPU AiO ManufacturerAlphacool Manufacturer P/N14621 SeriesAlphacool Core Base MaterialVerchromtes Copper (Cu-HCP) Maximum Operating Temperature60 °C Minimum Operating Temperature-20 °C Maximum Tested Pressure2,00 bar Radiator Dimensions272 x 120 x 25,5 mm (+/- 3%) Cooling Channels12 Pump Rated Voltage12 V Pump Power Consumption3.6 W (max. 4.32 W) Pump Speed3800 U/min ±10% Max. Flow Rate2100 ml/min ±10% Max. Head1.4 m ±10% Pump Noise Level25 dB(A) (max. 30 dB(A)) Fan Connector4-Pin PWM Dimensions120 x 120 x 25 mm Warranty3 years Important notes Use only with clear, transparent coolants. Particles from pastel fluids can clog pumps, blocks and radiators.

The Alphacool Core 2 LT AIO was developed specifically for compact PC systems and applications with limited space. As the successor to the Eisbaer LT, it consistently continues the compact concept and combines proven components with targeted technical improvements. An Alphacool NexXxoS ST25 Full Copper Radiator is used for heat dissipation. With a mounting height of only 25 mm, it requires significantly less space than classic radiators. As a result, the Core 2 LT is particularly suitable for compact cases and Small-Form-Factor systems without making unnecessary compromises in cooling performance. The pump and CPU cooler are housed in a compact unit. The cold plate is still made of copper and ensures efficient heat transfer from the CPU to the water circuit. The new Alphacool Core DC-LT 3 PWM is used as the pump. With up to 3800 rpm, it provides a reliable coolant flow. Thanks to PWM control, the speed can be flexibly adjusted to the current system load. A subtle blue LED backlight provides an additional visual accent on top of the CPU cooler. The 320 mm long TPV tubes and the rotatable 90° fittings on the CPU cooler make installation easier and allow for flexible tubing routing. Especially in tight cases, the AIO can be integrated neatly and in a space-saving manner. The Alphacool Core 120 mm fans with up to 2500 rpm provide the necessary airflow to the radiator at the same time. In this way, the Core 2 LT combines simple installation with high cooling performance in particularly compact space. As the successor to the Eisbaer LT, the Alphacool Core 2 LT AIO is aimed primarily at users who are looking for an uncomplicated, compact water cooling solution with an attractive price-to-performance ratio. The focus is on a balanced combination of cooling performance, low space requirements, and an affordable entry into water cooling. The Alphacool Core 2 LT AIO is available in 240-mm and 360-mm versions. Compatibility: AMD: AM4 / AM5 Intel: LGA 1150 / LGA 1151 / LGA 1155 / LGA 1156 / LGA 1200 / LGA 1700 / LGA 1851 / LGA 2066 Technical data - Cooler base Cooler base material Nickel-plated copper (Cu-HCP) Maximum tightening torque G 1/4 thread 1.00 Nm Maximum tightening torque M2 thread 0.13 Nm Maximum tightening torque M3 thread 0.48 Nm Maximum tightening torque M4 thread 1.12 Nm Maximum operating temperature 60 °C Minimum operating temperature -20 °C Maximum tested pressure 2.00 bar Recommended operating pressure 0.00 - 1.00 bar LED voltage 5 V DC LED power 0.3 W LED current 0.06 A Technical data - Radiator (360 mm) Dimensions (L x W x H) 393 x 120 x 22.5 mm Number of cooling channels 12 Fins per Inch (FPI) 15 Cooling channel material Copper Fin material Copper Housing material Steel Color Black Connectors 2x G 1/4" Fan size 120 mm Fan thread M3 Number of fans 3 Thickness 0 - 29 mm Pressure tested 0.8 bar Technical data - Pump Rated voltage 12 V DC Operating voltage 8 - 13.5 V DC Input current (filled) 0.30 A (max. 0.36 A) Input current (without water) 0.06 A (max. 0.10 A) Input current (flow measurement) 0.40 A (max. 0.48 A) Power consumption 3.6 W (max. 4.32 W) Speed 3800 rpm ±10% Max. flow rate 2100 ml/min ±10% Max. pump head 1.4 m ±10% Sound pressure level 25 dB(A) (max. 30 dB(A)) Technical data - Fans Dimensions (L x W x H) 120 x 120 x 25 mm Material PBT (UL94V-0) Bearing Hydraulic bearing Operating voltage 12 V DC (7 - 14 V DC) Start voltage 7 V Current 0.3 A (max. 0.4 A) Power consumption 3.6 W (max. 4.8 W) Speed range 0 - 2500 rpm ±10% Max. air flow rate 72.63 CFM Max. static pressure 2.42 mm/H2O Noise level 36.6 dBA (max. 37.8 dBA) Service life (MTBF) 50,000 h at 25 °C Connection 4-Pin PWM Speed control via PWM Operating temperature range -10 to +55 °C Technical data - Thermal paste Evaporation rate (24h @ 200°C) < 0.5% Density 3.2 g/cm³ (ASTM D792) Viscosity 150 - 200*10³ mPa.s (ASTM D2196) Operating temperature -40 °C to 120 °C Dielectric strength 250 V/mil (ASTM D149) Thermal impedance 0.1 ± 0.01 °C-in²/W (ASTM D5470) Max. operating pressure 40 psi Quantity 1 g Color Gray Warranty: 3 years ? Warranty terms Application note: Please use only in combination with clear, transparent water cooling liquids. The particles and additives in pastel liquids can clog and permanently damage water cooling products such as radiators, pumps, coolers and tubes. This can lead to the manufacturer warranty being voided.

Alphacool Core 2 XT 240mm CPU AiO – All-in-one liquid cooler for the processor Alphacool Core 2 XT 240mm CPU AiO is a closed-loop liquid cooler: pump, cold plate, tubing and radiator come pre-filled and sealed. That takes the filling and bleeding work out of liquid cooling while still moving the CPU heat to where there is room for a large radiator. The cold plate is chrome-plated copper and the housing above it aluminium – the coolant only ever touches the copper base. The pump delivers up to 2100 ml/min ±10% with a maximum head of 1.4 m ±10%. Key Features PWM control: Speed can be matched to system load via the PWM signal from the motherboard or a controller. Pre-filled and maintenance-free: The loop is filled and sealed at the factory – no filling, no bleeding, no topping up. Radiator instead of a tower above the CPU: Heat travels through the tubing to the radiator and is released there rather than building up above the socket. PWM-controlled fans: Speed, and with it noise, follows the actual load via the motherboard. Fits common sockets: The supplied brackets cover the widespread Intel and AMD sockets. Technical Specifications TypeAlphacool Core 2 XT 240mm CPU AiO ManufacturerAlphacool Manufacturer P/N14710 SeriesAlphacool Core Base MaterialVerchromtes Copper (Cu-HCP) Top MaterialAluminium (AlMg0,7Si) Maximum Operating Temperature60 °C Minimum Operating Temperature-20 °C Maximum Tested Pressure2,00 bar LEDs (count/length)12 pcs / 145,7 mm Pump Rated Voltage12 V Pump Power Consumption3.6 W (max. 4.32 W) Pump Speed3800 U/min ±10% Max. Flow Rate2100 ml/min ±10% Max. Head1.4 m ±10% Pump Noise Level25 dB(A) (max. 30 dB(A)) Fan Dimensions120 x 120 x 25,5 mm Fan Speed380~2600±10% U/Min Bearing TypeGleitlager Fan Connector4-Pin PWM Fan Rated Voltage12 V DC Fan Power Consumption3,72 W (max.) Airflow59,79 CFM Static Pressure3,35 mmH2O Noise Level36,4 dBA Lifetime (MTTF)100,000 h Fan Lighting5 V aRGB Radiator Dimensions271,5 x 124 x 30 mm (+/- 3%) Cooling Channels14 Radiator MaterialCopper Warranty3 years Important notes Use only with clear, transparent coolants. Particles from pastel fluids can clog pumps, blocks and radiators.

Alphacool Core 2 XT 280mm CPU AiO – All-in-one liquid cooler for the processor Alphacool Core 2 XT 280mm CPU AiO is a closed-loop liquid cooler: pump, cold plate, tubing and radiator come pre-filled and sealed. That takes the filling and bleeding work out of liquid cooling while still moving the CPU heat to where there is room for a large radiator. The cold plate is chrome-plated copper and the housing above it aluminium – the coolant only ever touches the copper base. The pump delivers up to 2100 ml/min ±10% with a maximum head of 1.4 m ±10%. Key Features PWM control: Speed can be matched to system load via the PWM signal from the motherboard or a controller. Pre-filled and maintenance-free: The loop is filled and sealed at the factory – no filling, no bleeding, no topping up. Radiator instead of a tower above the CPU: Heat travels through the tubing to the radiator and is released there rather than building up above the socket. PWM-controlled fans: Speed, and with it noise, follows the actual load via the motherboard. Fits common sockets: The supplied brackets cover the widespread Intel and AMD sockets. Technical Specifications TypeAlphacool Core 2 XT 280mm CPU AiO ManufacturerAlphacool Manufacturer P/N14711 SeriesAlphacool Core Base MaterialVerchromtes Copper (Cu-HCP) Top MaterialAluminium (AlMg0,7Si) Maximum Operating Temperature60 °C Minimum Operating Temperature-20 °C Maximum Tested Pressure2,00 bar LEDs (count/length)12 pcs / 145,7 mm Pump Rated Voltage12 V Pump Power Consumption3.6 W (max. 4.32 W) Pump Speed3800 U/min ±10% Max. Flow Rate2100 ml/min ±10% Max. Head1.4 m ±10% Pump Noise Level25 dB(A) (max. 30 dB(A)) Fan Dimensions120 x 120 x 25,5 mm Fan Speed380~2600±10% U/Min Bearing TypeGleitlager Fan Connector4-Pin PWM Fan Rated Voltage12 V DC Fan Power Consumption3,72 W (max.) Airflow59,79 CFM Static Pressure3,35 mmH₂O Noise Level36,4 dBA Lifetime (MTTF)100,000 h Fan Lighting5 V aRGB Radiator Dimensions314,5 x 144 x 30 mm (+/- 3%) Cooling Channels16 Radiator MaterialCopper Warranty3 years Important notes Use only with clear, transparent coolants. Particles from pastel fluids can clog pumps, blocks and radiators.

Alphacool Core 2 XT 360mm CPU AiO – All-in-one liquid cooler for the processor Alphacool Core 2 XT 360mm CPU AiO is a closed-loop liquid cooler: pump, cold plate, tubing and radiator come pre-filled and sealed. That takes the filling and bleeding work out of liquid cooling while still moving the CPU heat to where there is room for a large radiator. The cold plate is chrome-plated copper and the housing above it aluminium – the coolant only ever touches the copper base. The pump delivers up to 2100 ml/min ±10% with a maximum head of 1.4 m ±10%. Key Features PWM control: Speed can be matched to system load via the PWM signal from the motherboard or a controller. Pre-filled and maintenance-free: The loop is filled and sealed at the factory – no filling, no bleeding, no topping up. Radiator instead of a tower above the CPU: Heat travels through the tubing to the radiator and is released there rather than building up above the socket. PWM-controlled fans: Speed, and with it noise, follows the actual load via the motherboard. Fits common sockets: The supplied brackets cover the widespread Intel and AMD sockets. Technical Specifications TypeAlphacool Core 2 XT 360mm CPU AiO ManufacturerAlphacool Manufacturer P/N14712 SeriesAlphacool Core Base MaterialVerchromtes Copper (Cu-HCP) Top MaterialAluminium (AlMg0,7Si) Maximum Operating Temperature60 °C Minimum Operating Temperature-20 °C Maximum Tested Pressure2,00 bar LEDs (count/length)12 pcs / 145,7 mm Pump Rated Voltage12 V Pump Power Consumption3.6 W (max. 4.32 W) Pump Speed3800 U/min ±10% Max. Flow Rate2100 ml/min ±10% Max. Head1.4 m ±10% Pump Noise Level25 dB(A) (max. 30 dB(A)) Fan Dimensions120 x 120 x 25,5 mm Fan Speed380~2600±10% U/Min Bearing TypeGleitlager Fan Connector4-Pin PWM Fan Rated Voltage12 V DC Fan Power Consumption3,72 W (max.) Airflow59,79 CFM Static Pressure3,35 mmH₂O Noise Level36,4 dBA Lifetime (MTTF)100,000 h Fan Lighting5 V aRGB Radiator Dimensions391,5 x 124 x 30 mm (+/- 3%) Cooling Channels14 Radiator MaterialCopper Warranty3 years Important notes Use only with clear, transparent coolants. Particles from pastel fluids can clog pumps, blocks and radiators.

Alphacool Core 2 XT 420mm CPU AiO – All-in-one liquid cooler for the processor Alphacool Core 2 XT 420mm CPU AiO is a closed-loop liquid cooler: pump, cold plate, tubing and radiator come pre-filled and sealed. That takes the filling and bleeding work out of liquid cooling while still moving the CPU heat to where there is room for a large radiator. The cold plate is chrome-plated copper and the housing above it aluminium – the coolant only ever touches the copper base. The pump delivers up to 2100 ml/min ±10% with a maximum head of 1.4 m ±10%. Key Features PWM control: Speed can be matched to system load via the PWM signal from the motherboard or a controller. Pre-filled and maintenance-free: The loop is filled and sealed at the factory – no filling, no bleeding, no topping up. Radiator instead of a tower above the CPU: Heat travels through the tubing to the radiator and is released there rather than building up above the socket. PWM-controlled fans: Speed, and with it noise, follows the actual load via the motherboard. Fits common sockets: The supplied brackets cover the widespread Intel and AMD sockets. Technical Specifications TypeAlphacool Core 2 XT 420mm CPU AiO ManufacturerAlphacool Manufacturer P/N14713 SeriesAlphacool Core Base MaterialVerchromtes Copper (Cu-HCP) Top MaterialAluminium (AlMg0,7Si) Maximum Operating Temperature60 °C Minimum Operating Temperature-20 °C Maximum Tested Pressure2,00 bar LEDs (count/length)12 pcs / 145,7 mm Pump Rated Voltage12 V Pump Power Consumption3.6 W (max. 4.32 W) Pump Speed3800 U/min ±10% Max. Flow Rate2100 ml/min ±10% Max. Head1.4 m ±10% Pump Noise Level25 dB(A) (max. 30 dB(A)) Fan Dimensions120 x 120 x 25,5 mm Fan Speed380~2600±10% U/Min Bearing TypeGleitlager Fan Connector4-Pin PWM Fan Rated Voltage12 V DC Fan Power Consumption3,72 W (max.) Airflow59,79 CFM Static Pressure3,35 mmH₂O Noise Level36,4 dBA Lifetime (MTTF)100,000 h Fan Lighting5 V aRGB Radiator Dimensions455,5 x 144 x 30 mm (+/- 3%) Cooling Channels16 Radiator MaterialCopper Warranty3 years Important notes Use only with clear, transparent coolants. Particles from pastel fluids can clog pumps, blocks and radiators.

Alphacool 2-part thermal adhesive is perfect for mounting coolers onto components such as motherboard VRMs. The 2-part epoxy-based adhesive is the optimal choice when coolers need to be mounted more securely onto the CPU or GPU of single-board computers (Raspberry PI, ODROID, Arduino, Cubieboard etc.). The range of applications is so wide that even coolers on electronic components in power amplifiers or RC vehicles can be bonded reliably and securely. Properties The Alphacool 2-part thermal adhesive is electrically non-conductive. The high metallic content of aluminium nitride (70 - 73 %) guarantees optimal thermal conductivity (0.9 W/mK). The thermal adhesive creates a stable bond. Due to the material composition, mechanical variances between the components to be bonded can also be compensated for well. Surface curing is achieved after 2h (at 25°C ambient temperature). Complete curing takes place within 5 to 7 days (at 25°C ambient temperature). Application All surfaces must be clean and free of grease, dust or contaminants. Important: The processing time is limited! As a rule, the processing time is about 10 minutes until the adhesive starts to cure. Adhesive (black) and activator (yellow) must be thoroughly mixed in a ratio of 4:1 on a clean surface for approx. 2 to 3 minutes with a spatula. Perfect mixing is important to ensure an optimum bond. The two-part adhesive can then be applied thinly to the surfaces to be bonded using a spatula. Finally, the components to be bonded are pressed together. Higher ambient temperatures during processing ensure effective curing of the adhesive and increase strength at higher temperatures. Technical data: Mixing ratio (adhesive : activator): 4 : 1 Thermal conductivity: 0.9 W/mK Surface curing (at 25°C): 2 h Total curing (at 25°C): 5-7 days Boiling point: >200°C Flash point: >88°C Specific gravity (yellow component): 0.97 g/cm3 Specific gravity (black component): 2.08 g/cm3 Download data sheet PDF: Alphacool Core 2-component heat conducting adhesive

The Alphacool Core reservoir has an integrated pump top for powerful D5 pumps and comes with a VPP655 PWM pump. The tube of the reservoir is made of acrylic, the D5/VPP pump top and the lid of acetal. The combination of these two materials gives the expansion tank a discreet appearance. The wow effect is provided by 12 digitally addressable RGB LEDs in the pump top and the Lighttower water effect inside the acrylic tube.What's new?Compared to the previous Eisbecher models, the acrylic tube of the Core reservoir has an external thread. This provides more stability and safety when connecting the lid and pump top to the tube. Also new is the integrated digital aRGB lighting. 12 digitally addressable RGB LEDs in the pump top are included in the scope of delivery of the Core reservoir and no longer have to be purchased separately. Extensive mounting optionsMounting option 1:Stands are included in the scope of delivery, which, among other things, allow the expansion tank to be mounted on the bottom of the enclosure. Mounting option 2:Included in the scope of delivery are 120mm/140mm mounting frames, which can be used to mount the Core expansion tank as desired on free fan spaces, radiators or on the fans on radiators.Digitally addressable RGB lighting12 digitally addressable RGB LEDs illuminate the aycryl tube of the reservoir. They are mounted in a ring at the lower end of the tube in the transition to the pump top and provide brilliant illumination of the entire expansion tank. In combination with the Lighttower water effect, a very special ambience is achieved. The digital aRGB LED lighting is connected via a JST 3-pin connector and can be controlled with a digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360) or a digital RGB capable mainboard.Lighttower water effectA special water effect is created in the core reservoir via the riser tubes. If you do not fill the reservoir beyond the top edge of the riser tube, you get a kind of fountain effect. In this case, the water is pushed out the sides of the riser tube and splashed against the glass tube. Depending on the flow of the circuit, the effect is stronger or weaker. The effect can be placed at the lower or upper inlet using the riser tubes included in the delivery.PumpThis pump is ideal for PC and other electronics water cooling. The DC pump is equipped with an electronically commutated spherical motor. In a pump with a spherical motor the only moving part is a spherically shaped rotor which in this pump is held in place by a bearing ball made of ultra-hard and wear-resistant ceramic. The spherical bearing of the rotor offers many advantages: For example an increase of bearing play is impossible due to the design, allowing the pump to run quietly and smoothly over its whole lifespan. A separate magnetic shielding of the pump is not needed. Technical dataL x W x H251 x 76,5 x 76,5 mmPump compatibilityD5Capacity400 mlMaterial Pump top & coveracetalMaterial tubeacrylicConnection3x G1/4“ internal threadMaximum working temperature60 °CPressure tested0,8 BarQuantity of digital aRGB LEDs12Power digital aRGB LEDs5VPower connector digital aRGB LEDs3-pin JST (male & female switch)Weight621 gColorblackTechnical data VPP655 PWMDimensions (L x W x H)65 x 65 x 57mmMaterial pumpsynthetic materialMaterial axleceramicsConnections4 Pin MolexRotational speed800-4800 RPMOperating voltage8-24V DCPower consumption23WMaximum pumping head3,7mMax flow1000l/hMax working temperature60 °Ccolorblack

The Alphacool Core reservoir has an integrated pump top for powerful D5 pumps and comes with a VPP Apex pump. The tube of the reservoir is made of acrylic, the D5/VPP pump top and the lid of acetal. The combination of these two materials gives the expansion tank a discreet appearance. The wow effect is provided by 12 digitally addressable RGB LEDs in the pump top and the Lighttower water effect inside the acrylic tube.What's new?Compared to the previous Eisbecher models, the acrylic tube of the Core reservoir has an external thread. This provides more stability and safety when connecting the lid and pump top to the tube. Also new is the integrated digital aRGB lighting. 12 digitally addressable RGB LEDs in the pump top are included in the scope of delivery of the Core reservoir and no longer have to be purchased separately. Extensive mounting optionsMounting option 1:Stands are included in the scope of delivery, which, among other things, allow the expansion tank to be mounted on the bottom of the enclosure. Mounting option 2:Included in the scope of delivery are 120mm/140mm mounting frames, which can be used to mount the Core expansion tank as desired on free fan spaces, radiators or on the fans on radiators.Digitally addressable RGB lighting12 digitally addressable RGB LEDs illuminate the aycryl tube of the reservoir. They are mounted in a ring at the lower end of the tube in the transition to the pump top and provide brilliant illumination of the entire expansion tank. In combination with the Lighttower water effect, a very special ambience is achieved. The digital aRGB LED lighting is connected via a JST 3-pin connector and can be controlled with a digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360) or a digital RGB capable mainboard.Lighttower water effectA special water effect is created in the core reservoir via the riser tubes. If you do not fill the reservoir beyond the top edge of the riser tube, you get a kind of fountain effect. In this case, the water is pushed out the sides of the riser tube and splashed against the glass tube. Depending on the flow of the circuit, the effect is stronger or weaker. The effect can be placed at the lower or upper inlet using the riser tubes included in the delivery.Pump compatibilityThe Alphacool Core expansion tank has an integrated pump top and is compatible with all original D5 pumps as well as all Alphacool VPP pumps. The pump retaining ring, a pump O-ring and all screws are included in the scope of delivery.PumpThe VPP Apex pump does without a spherical bearing and uses a ceramic shaft. The motor's coils have been moved from the inside to the outside. These changes have the effect that the pump is fundamentally more stable and smoother running, and any vibrations that arise have been significantlyreduced. Another positive side effect is that power consumption has been almost halved as a result. Compared to Alphacool's Eispumpe, the power is not supplied via a 4-pin Molex connector. Instead, the Apex VPP pump is connected to the power supply using a SATA connector. The Apex VPP pump has a 4-pin fan connector that connects to the motherboard or to an external controller. This allows you to control the speed range of the pump via PWM and read out the RPM signal. Technical dataL x W x H251 x 76,5 x 76,5 mmPump compatibilityD5Capacity400 mlMaterial Pump top & coveracetalMaterial tubeacrylicConnection3x G1/4“ internal threadMaximum working temperature60 °CPressure tested0,8 BarQuantity of digital aRGB LEDs12Power digital aRGB LEDs5VPower connector digital aRGB LEDs3-pin JST (male & female switch)Weight621 gColorblackTechnical data VPP ApexDimensions (L x W x H)65 x 65 x 41mmMaterial pumpsynthetic materialMaterial pump coveraluminiumMaterial axleceramicsConnections4-Pin PWM | SATARotational speed2500 - 4500 RPMCable lenghts4-Pin PWM - 48cm | SATA - 48cmOperating voltage8-13V DC / 14W IP32Starting voltage12V DCMaximum pumping head4,25 mMax flow340 l/hMax working temperature60 °CNet weight276 gcolorblack

The Alphacool Core reservoir combines performance with design. The tube of the reservoir is made of acrylic, the D5/VPP pump top and the lid of acetal. The combination of these two materials gives the expansion tank a discreet appearance. The wow effect is provided by 12 digitally addressable RGB LEDs in the pump top and the Lighttower water effect inside the acrylic tube. What's new? Compared to the previous Eisbecher models, the acrylic tube of the Core reservoir has an external thread. This provides more stability and safety when connecting the lid and pump top to the tube. Also new is the integrated digital aRGB lighting. 12 digitally addressable RGB LEDs in the pump top are included in the scope of delivery of the Core reservoir and no longer have to be purchased separately. Extensive mounting options Mounting option 1: Stands are included in the scope of delivery, which, among other things, allow the expansion tank to be mounted on the bottom of the enclosure. Mounting option 2: Included in the scope of delivery are 120mm/140mm mounting frames, which can be used to mount the Core expansion tank as desired on free fan spaces, radiators or on the fans on radiators. Digitally addressable RGB lighting 12 digitally addressable RGB LEDs illuminate the aycryl tube of the reservoir. They are mounted in a ring at the lower end of the tube in the transition to the pump top and provide brilliant illumination of the entire expansion tank. In combination with the Lighttower water effect, a very special ambience is achieved. The digital aRGB LED lighting is connected via a JST 3-pin connector and can be controlled with a digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360) or a digital RGB capable mainboard. Lighttower water effect A special water effect is created in the core reservoir via the riser tubes. If you do not fill the reservoir beyond the top edge of the riser tube, you get a kind of fountain effect. In this case, the water is pushed out the sides of the riser tube and splashed against the glass tube. Depending on the flow of the circuit, the effect is stronger or weaker. The effect can be placed at the lower or upper inlet using the riser tubes included in the delivery. Pump compatibility The Alphacool Core expansion tank has an integrated pump top and is compatible with all original D5 pumps as well as all Alphacool VPP pumps. The pump retaining ring, a pump O-ring and all screws are included in the scope of delivery. Technical data L x W x H 251 x 76,5 x 76,5 mm Pump compatibility D5 Capacity 400 ml Material Pump top & cover acetal Material tube acrylic Connection 3x G1/4“ internal thread Maximum working temperature 60 °C Pressure tested 0,8 Bar Quantity of digital aRGB LEDs 12 Power digital aRGB LEDs 5V Power connector digital aRGB LEDs 3-pin JST (male & female switch) Weight 621 g Color black

Alphacool provides more flexibility when mounting Distro Plates. With the Universal Mounting Bracket, the Alphacool Distro Plate can be mounted at a 90° angle. Either on the radiator or directly on to the case. This expands the creative possibilities and increases customisability. Compatibility:Alphacool Core Distro Plate 240/280mmAlphacool Core Flat Reservoir 240/280mm Technical dataDimensions44,00 x 33,00mmMaterialMetalWeight170gColorblack

Distroplate for water cooling systems, with pre-installed VPP pump, easy to mount, integrated RGB lighting

Alphacool provides more flexibility when mounting Distro Plates. With the Universal Mounting Bracket, the Alphacool Distro Plate can be mounted at a 90° angle. Either on the radiator or directly on to the case. This expands the creative possibilities and increases customisability. Compatibility:Alphacool Core Distro Plate 240/280mmAlphacool Core Flat Reservoir 240/280mm Technical dataDimensions44,00 x 33,00mmMaterialMetalWeight260gColorblack