Arvutitark OÜ

All-In-One Full-Cover-Wasserkühlung von Alphacool, für RTX 3090 Ti Strix/TUF-Grafikkarten von ASUS, mit 360-mm-Vollkupfer-Radiator, drei 120-mm-RGB-Lüfter, vernickelter Kühlerboden + Acryldeckel, eingebaute DC-LT-2-Pumpe, digital adressierbare RGB-LED-Beleuchtung, erweiterbar durch Schnellverschlüsse

All-In-One Full-Cover-Wasserkühlung von Alphacool, für RTX 3090 Ti Suprim X-Grafikkarten von MSI, mit 360-mm-Vollkupfer-Radiator, drei 120-mm-RGB-Lüfter, vernickelter Kühlerboden + Acryldeckel, eingebaute DC-LT-2-Pumpe, digital adressierbare RGB-LED-Beleuchtung, erweiterbar durch Schnellverschlüsse

All-In-One Full-Cover-Wasserkühlung von Alphacool, für RTX 3080/3090 Grafikkarten im Referenzdesign, mit 360-mm-Vollkupfer-Radiator, drei 120-mm-RGB-Lüfter, vernickelter Kühlerboden + Acryldeckel, eingebaute DC-LT-2-Pumpe, digital adressierbare RGB-LED-Beleuchtung, erweiterbar durch Schnellverschlüsse

<p style="text-align: justify;">The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans.<br /><br /><b>Fullcover Waterblock?</b><br />The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler.<br /><br /><b>Chrome-plated copper</b><br />The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers.<br /><br /><b>Pump</b><br />The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal.<br /><br /><b>Fittings and Tubing</b><br />As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly.<br /><br /><b>Expandability</b><br />By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together.<br /><br /><b>Lighting and fans</b><br />The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm.<br /><br /><b>NexXxoS Radiator</b><br />As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success.<br /><br />The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop.<br /><br /><b>Technical note!</b><br />Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.<p> </p><b>Compatibility:</b><br>- Nvidia GeForce RTX 4080 Founders Edition, 16GB GDDR6X (900-1G136-2560-000)<br>- Nvidia GeForce RTX 4080 Super Founders Edition<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data radiator</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>395 x 124 x 30mm (+/- 3%)</td></tr><tr><td>Material cooling fins, chambers & channels</td><td>Copper</td></tr><tr><td>Material threads</td><td>Brass</td></tr><tr><td>Material outer housing</td><td>stainless steel</td></tr><tr><td>G 1/4“ threads</td><td>2 x for tubes (+ 1x Fillport G1/4“)</td></tr><tr><td>For fan size</td><td>120 mm</td></tr><tr><td>Options for fan assembly</td><td>3 x one-sided / 6 x both-sided</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data cooler and pump</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>205,42 x 156,89 x 47,30 mm</td></tr><tr><td>Material cooler bottom</td><td>Chrome plated copper</td></tr><tr><td>Material cooler top</td><td>acrylic</td></tr><tr><td>Threads</td><td>2 x G1/4“</td></tr><tr><td>Pump type</td><td>DC-LT 2</td></tr><tr><td>Pump speed</td><td>2600 rpm (+/- 10%)</td></tr><tr><td>Head of delivery</td><td>1 m</td></tr><tr><td>Maximum flow rate</td><td>72 L/h</td></tr><tr><td>Voltage</td><td>6-13.5V DC</td></tr><tr><td>Power consumption</td><td>3.2W</td></tr><tr><td>MTBF</td><td>50.000 h</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data liquid</b></td></tr><tr><td>Color</td><td>clear</td></tr><tr><td>Ingredient 1</td><td>Destilled water (CAS-number 7732-18-5)</td></tr><tr><td>Ingredient 2</td><td>Glysantin (CAS-number 1017-21-1)</td></tr><tr><td>Working temperatures</td><td>-15 C° / +90 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data quick fasteners</b></td></tr><tr><td>Dimensions (L x D)</td><td>95 x 27mm</td></tr><tr><td>Material</td><td>Nylon</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Color</td><td>Black</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fittings</b></td></tr><tr><td>L x D straight fitting</td><td>24 x 18mm</td></tr><tr><td>Quantity straight fittings</td><td>2x</td></tr><tr><td>L x B x H 90° fitting</td><td>35 x 27 x 17mm</td></tr><tr><td>Quantity 90° fittings</td><td>2x</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Material fittings</td><td>Brass</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data tube</b></td></tr><tr><td>Length</td><td>50cm</td></tr><tr><td>Material tube</td><td>TPV (EPDM/PP)</td></tr><tr><td>Color</td><td>Matt black</td></tr><tr><td>Tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Hardness grade</td><td>35 Shore-A to 50 Shore-D</td></tr><tr><td>Working temperature</td><td>-50 to +155 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fan</b></td></tr><tr><td>Speed</td><td>0 - 2500 RPM</td></tr><tr><td>Static pressure</td><td>3,17 mm H2O</td></tr><tr><td>Air flow rate</td><td>119,8 m³/h</td></tr><tr><td>Bearings</td><td>Sleeve bearing</td></tr><tr><td>Fan connector</td><td>4-Pin PWM</td></tr><tr><td>Connection Digital aRGB</td><td>3-Pin JST + 3-Pin 5V</td></tr><tr><td>Dimensions (L x W x H)</td><td>120 x 120 x 25mm</td></tr><tr><td>Net weight</td><td>187g</td></tr><tr><td>Max working temperature</td><td>60°C</td></tr></table><br></p>

All-in-One-Wasserkühlung, für NVIDIA GeForce RTX 4080 Reference Design-Grafikkarten, 360 mm Radiator, 3x 120-mm-PWM-Lüfter, mit integrierter RGB-Beleuchtung

All-in-One-Wasserkühlung, für ASUS ROG Strix GeForce RTX 4080, 360 mm Radiator, 3x 120-mm-PWM-Lüfter, mit integrierter RGB-Beleuchtung

All-in-One-Wasserkühlung, für MSI GeForce RTX 4080 Gaming und Suprim, 360 mm Radiator, 3x 120-mm-PWM-Lüfter, mit integrierter RGB-Beleuchtung

All-in-One-Wasserkühlung, für Zotac Gaming GeForce RTX 4090-Grafikkarten, 360 mm Radiator, 3x 120-mm-PWM-Lüfter, mit integrierter RGB-Beleuchtung

All-in-One-Wasserkühlung, für Gigabyte Gaming/Aorus Master RTX 4090-Grafikkarten, 360 mm Radiator, 3x 120-mm-PWM-Lüfter, mit integrierter RGB-Beleuchtung

All-in-One-Wasserkühlung, für NVIDIA GeForce RTX 4090 FE-Grafikkarten, 360 mm Radiator, 3x 120-mm-PWM-Lüfter, mit integrierter RGB-Beleuchtung

All-in-One-Wasserkühlung, für Palit/Gainward GeForce RTX 4090 Gamerock/Phantom-Grafikkarten, 360 mm Radiator, 3x 120-mm-PWM-Lüfter, mit integrierter RGB-Beleuchtung

All-In-One Full-Cover-Wasserkühlung von Alphacool, für RTX 4090 Grafikkarten im Referenzdesign, mit 360-mm-Vollkupfer-Radiator, drei 120-mm-RGB-Lüfter, vernickelter Kühlerboden + Acryldeckel, eingebaute DC-LT-2-Pumpe, digital adressierbare RGB-LED-Beleuchtung, erweiterbar durch Schnellverschlüsse

All-in-One-Wasserkühlung, für MSI GeForce RTX 4090 Suprim-Grafikkarten, 360 mm Radiator, 3x 120-mm-PWM-Lüfter, mit integrierter RGB-Beleuchtung

<p style="text-align: justify;">The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans.<br /><br /><b>Fullcover Waterblock?</b><br />The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler.<br /><br /><b>Pump</b><br />The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal.<br /><br /><b>Fittings and Tubing</b><br />As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly.<br /><br /><b>Expandability</b><br />By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together.<br /><br /><b>Lighting and fans</b><br />The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm.<br /><br /><b>NexXxoS Radiator</b><br />As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success.<br /><br />The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop.<br /><br /><b>Technical note!</b><br />Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.<p> </p><b>Compatibility:</b><br>- AMD Radeon RX 6800, 16GB GDDR6<br>- ASRock Radeon RX 6800 16G, 16GB GDDR6<br>- Asus Radeon RX 6800, RX6800-16G, 16GB GDDR6<br>- Gigabyte Radeon RX 6800 16G, 16GB GDDR6 (GV-R68-16GC-B)<br>- AMD Radeon RX 6800 XT, 16GB GDDR6<br>- Gigabyte Radeon RX 6800 XT 16G, 16GB GDDR6 (GV-R68XT-16GC-B)<br>- AMD Radeon™ RX 6900 XT Graphics<br>- Gigabyte Radeon™ RX 6900 XT 16G (GV-R69XT-16GC-B)<br>- PowerColor AMD Radeon™ RX 6900 XT 16GB GDDR6 (AXRX 6900XT 16GBD6-M2DHC)<br>- XFX AMD Radeon™ RX 6900 XT Gaming Graphics Card with 16GB GDDR6<br>- AMD Radeon™ RX 6950 XT<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Data radiator</b></td></tr><tr><td>L x W x H</td><td>395 x 124 x 30mm (+/- 3%)</td></tr><tr><td>Material cooling fins, chambers & channels</td><td>Copper</td></tr><tr><td>Material chambers</td><td>Copper</td></tr><tr><td>Material cooling channels</td><td>Copper</td></tr><tr><td>Material threads</td><td>Brass</td></tr><tr><td>Material outer housing</td><td>stainless steel</td></tr><tr><td>G 1/4“ threads</td><td>2 x for tubes (+ 1x Fillport G1/4“)</td></tr><tr><td>For fan size</td><td>120 mm</td></tr><tr><td>Possible fan assembly</td><td>3 x one-sided / 6 x both-sided</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Data cooler and pump</b></td></tr><tr><td>L x W x H</td><td>140 x 265 x 46mm</td></tr><tr><td>Material cooler bottom</td><td>Chrome plated copper</td></tr><tr><td>Material cooler top</td><td>PMMA</td></tr><tr><td>Threads</td><td>2 x G1/4“</td></tr><tr><td>Pump type</td><td>DC-LT 2</td></tr><tr><td>Pump speed</td><td>2600 rpm (+/- 10%)</td></tr><tr><td>Head of delivery</td><td>1 m</td></tr><tr><td>Maximum flow rate</td><td>72 L/h</td></tr><tr><td>Voltage</td><td>6-13.5V DC</td></tr><tr><td>Power consumption</td><td>3.2W</td></tr><tr><td>MTBF</td><td>50.000 h</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Data liquid</b></td></tr><tr><td>Color</td><td>clear</td></tr><tr><td>Ingredient 1</td><td>Destilled water (CAS-number 7732-18-5)</td></tr><tr><td>Ingredient 2</td><td>Glysantin (CAS-number 1017-21-1)</td></tr><tr><td>Working temperatures</td><td>-15 C° / +90 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Data quick fasteners</b></td></tr><tr><td>L x D</td><td>95 x 27 mm</td></tr><tr><td>Material</td><td>Nylon</td></tr><tr><td>For tube size</td><td>12,7 / 7,6 mm</td></tr><tr><td>Color</td><td>Black</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Data fittings</b></td></tr><tr><td>L x D straight fitting</td><td>24 x 18 mm</td></tr><tr><td>Quantity straight fittings</td><td>2x</td></tr><tr><td>L x B x H 90° fitting</td><td>35 x 27 x 17 mm</td></tr><tr><td>Quantity 90° fittings</td><td>2x</td></tr><tr><td>For tube size</td><td>12,7 / 7,6 mm</td></tr><tr><td>Material fittings</td><td>Brass</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Data tube</b></td></tr><tr><td>Length</td><td>50 cm</td></tr><tr><td>Material tube</td><td>TPV (EPDM/PP)</td></tr><tr><td>Color</td><td>Matt black</td></tr><tr><td>Tube size</td><td>12,7 / 7,6 mm</td></tr><tr><td>Hardness grade</td><td>35 Shore-A to 50 Shore-D</td></tr><tr><td>Working temperature</td><td>-50 to +155 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Data fan</b></td></tr><tr><td>Speed</td><td>0 - 2500 RPM</td></tr><tr><td>Static pressure</td><td>3,17 mm H2O</td></tr><tr><td>Air flow rate</td><td>119,8 m³/h</td></tr><tr><td>Bearings</td><td>Sleeve bearing</td></tr><tr><td>Fan connector</td><td>4-Pin PWM</td></tr><tr><td>Connection Digital aRGB</td><td>3-Pin JST + 3-Pin 5V</td></tr><tr><td>Dimensions</td><td>120 x 120 x 25 mm</td></tr><tr><td>Net weight</td><td>187 g</td></tr><tr><td>Max working temperature</td><td>60 °C</td></tr></table><br></p>

All-In-One Full-Cover-Wasserkühlung von Alphacool, für Radeon RX 6800/6800XT/6900 Sapphire Nitro+, mit 360-mm-Vollkupfer-Radiator, drei 120-mm-RGB-Lüfter, vernickelter Kühlerboden + Acryldeckel, eingebaute DC-LT-2-Pumpe, digital adressierbare RGB-LED-Beleuchtung, erweiterbar durch Schnellverschlüsse

<p style="text-align: justify;">The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans.<br /><br /><b>Fullcover Waterblock?</b><br />The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler.<br /><br /><b>Chrome-plated copper</b><br />The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers.<br /><br /><b>Pump</b><br />The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal.<br /><br /><b>Fittings and Tubing</b><br />As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly.<br /><br /><b>Expandability</b><br />By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together.<br /><br /><b>Lighting and fans</b><br />The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm.<br /><br /><b>NexXxoS Radiator</b><br />As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success.<br /><br />The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop.<br /><br /><b>Technical note!</b><br />Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.<p> </p><b>Compatibility:</b><br>- AMD Radeon RX 7900 XT, 20GB GDDR6<br>- ASRock Radeon RX 7900 XT, 20GB GDDR6<br>- Asus Radeon RX 7900 XT, RX7900XT-20G, 20GB GDDR6 (90YV0IU0-U0NM00)<br>- Biostar Radeon RX 7900 XT, 20GB GDDR6 (VA7906XM00)<br>- Gigabyte Radeon RX 7900 XT 20G, 20GB GDDR6 (GV-R79XT-20GC-B)<br>- PowerColor Radeon RX 7900 XT, 20GB GDDR6 (RX 7900 XT 20G)<br>- Sapphire Radeon RX 7900 XT, 20GB GDDR6 (21323-01-20G)<br>- XFX Radeon RX 7900 XT, 20GB GDDR6 (RX-79TMBABF9)<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data radiator</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>395 x 124 x 30mm (+/- 3%)</td></tr><tr><td>Material cooling fins, chambers & channels</td><td>Copper</td></tr><tr><td>Material threads</td><td>Brass</td></tr><tr><td>Material outer housing</td><td>stainless steel</td></tr><tr><td>G 1/4“ threads</td><td>2 x for tubes (+ 1x Fillport G1/4“)</td></tr><tr><td>For fan size</td><td>120 mm</td></tr><tr><td>Options for fan assembly</td><td>3 x one-sided / 6 x both-sided</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data cooler and pump</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>265,50 x 135,00 x 71,43mm</td></tr><tr><td>Material cooler bottom</td><td>Chrome plated copper</td></tr><tr><td>Material cooler top</td><td>acrylic</td></tr><tr><td>Threads</td><td>2 x G1/4“</td></tr><tr><td>Pump type</td><td>DC-LT 2</td></tr><tr><td>Pump speed</td><td>2600 rpm (+/- 10%)</td></tr><tr><td>Head of delivery</td><td>1 m</td></tr><tr><td>Maximum flow rate</td><td>72 L/h</td></tr><tr><td>Voltage</td><td>6-13.5V DC</td></tr><tr><td>Power consumption</td><td>3.2W</td></tr><tr><td>MTBF</td><td>50.000 h</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data liquid</b></td></tr><tr><td>Color</td><td>clear</td></tr><tr><td>Ingredient 1</td><td>Destilled water (CAS-number 7732-18-5)</td></tr><tr><td>Ingredient 2</td><td>Glysantin (CAS-number 1017-21-1)</td></tr><tr><td>Working temperatures</td><td>-15 C° / +90 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data quick fasteners</b></td></tr><tr><td>Dimensions (L x D)</td><td>95 x 27mm</td></tr><tr><td>Material</td><td>Nylon</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Color</td><td>Black</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fittings</b></td></tr><tr><td>L x D straight fitting</td><td>24 x 18mm</td></tr><tr><td>Quantity straight fittings</td><td>2x</td></tr><tr><td>L x B x H 90° fitting</td><td>35 x 27 x 17mm</td></tr><tr><td>Quantity 90° fittings</td><td>2x</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Material fittings</td><td>Brass</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data tube</b></td></tr><tr><td>Length</td><td>50cm</td></tr><tr><td>Material tube</td><td>TPV (EPDM/PP)</td></tr><tr><td>Color</td><td>Matt black</td></tr><tr><td>Tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Hardness grade</td><td>35 Shore-A to 50 Shore-D</td></tr><tr><td>Working temperature</td><td>-50 to +155 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fan</b></td></tr><tr><td>Speed</td><td>0 - 2500 RPM</td></tr><tr><td>Static pressure</td><td>3,17 mm H2O</td></tr><tr><td>Air flow rate</td><td>119,8 m³/h</td></tr><tr><td>Bearings</td><td>Sleeve bearing</td></tr><tr><td>Fan connector</td><td>4-Pin PWM</td></tr><tr><td>Connection Digital aRGB</td><td>3-Pin JST + 3-Pin 5V</td></tr><tr><td>Dimensions (L x W x H)</td><td>120 x 120 x 25mm</td></tr><tr><td>Net weight</td><td>187g</td></tr><tr><td>Max working temperature</td><td>60°C</td></tr></table><br></p>

<p style="text-align: justify;">The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans.<br /><br /><b>Fullcover Waterblock?</b><br />The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler.<br /><br /><b>Chrome-plated copper</b><br />The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers.<br /><br /><b>Pump</b><br />The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal.<br /><br /><b>Fittings and Tubing</b><br />As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly.<br /><br /><b>Expandability</b><br />By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together.<br /><br /><b>Lighting and fans</b><br />The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm.<br /><br /><b>NexXxoS Radiator</b><br />As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success.<br /><br />The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop.<br /><br /><b>Technical note!</b><br />Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.<p> </p><b>Compatibility:</b><br>- XFX Speedster MERC 310 Radeon RX 7900 XT Black Edition, 20GB GDDR6 (RX-79TMERCB9)<br>- XFX Speedster MERC 310 Radeon RX 7900 XT, 20GB GDDR6 (RX-79TMERCU9)<br>- XFX Speedster MERC 310 Radeon RX 7900 XTX Black Edition, 24GB GDDR6 (RX-79XMERCB9)<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data radiator</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>395 x 124 x 30mm (+/- 3%)</td></tr><tr><td>Material cooling fins, chambers & channels</td><td>Copper</td></tr><tr><td>Material threads</td><td>Brass</td></tr><tr><td>Material outer housing</td><td>stainless steel</td></tr><tr><td>G 1/4“ threads</td><td>2 x for tubes (+ 1x Fillport G1/4“)</td></tr><tr><td>For fan size</td><td>120 mm</td></tr><tr><td>Options for fan assembly</td><td>3 x one-sided / 6 x both-sided</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data cooler and pump</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>287,10 x 145,00 x 71,43mm</td></tr><tr><td>Material cooler bottom</td><td>Chrome plated copper</td></tr><tr><td>Material cooler top</td><td>acrylic</td></tr><tr><td>Threads</td><td>2 x G1/4“</td></tr><tr><td>Pump type</td><td>DC-LT 2</td></tr><tr><td>Pump speed</td><td>2600 rpm (+/- 10%)</td></tr><tr><td>Head of delivery</td><td>1 m</td></tr><tr><td>Maximum flow rate</td><td>72 L/h</td></tr><tr><td>Voltage</td><td>6-13.5V DC</td></tr><tr><td>Power consumption</td><td>3.2W</td></tr><tr><td>MTBF</td><td>50.000 h</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data liquid</b></td></tr><tr><td>Color</td><td>clear</td></tr><tr><td>Ingredient 1</td><td>Destilled water (CAS-number 7732-18-5)</td></tr><tr><td>Ingredient 2</td><td>Glysantin (CAS-number 1017-21-1)</td></tr><tr><td>Working temperatures</td><td>-15 C° / +90 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data quick fasteners</b></td></tr><tr><td>Dimensions (L x D)</td><td>95 x 27mm</td></tr><tr><td>Material</td><td>Nylon</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Color</td><td>Black</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fittings</b></td></tr><tr><td>L x D straight fitting</td><td>24 x 18mm</td></tr><tr><td>Quantity straight fittings</td><td>2x</td></tr><tr><td>L x B x H 90° fitting</td><td>35 x 27 x 17mm</td></tr><tr><td>Quantity 90° fittings</td><td>2x</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Material fittings</td><td>Brass</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data tube</b></td></tr><tr><td>Length</td><td>50cm</td></tr><tr><td>Material tube</td><td>TPV (EPDM/PP)</td></tr><tr><td>Color</td><td>Matt black</td></tr><tr><td>Tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Hardness grade</td><td>35 Shore-A to 50 Shore-D</td></tr><tr><td>Working temperature</td><td>-50 to +155 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fan</b></td></tr><tr><td>Speed</td><td>0 - 2500 RPM</td></tr><tr><td>Static pressure</td><td>3,17 mm H2O</td></tr><tr><td>Air flow rate</td><td>119,8 m³/h</td></tr><tr><td>Bearings</td><td>Sleeve bearing</td></tr><tr><td>Fan connector</td><td>4-Pin PWM</td></tr><tr><td>Connection Digital aRGB</td><td>3-Pin JST + 3-Pin 5V</td></tr><tr><td>Dimensions (L x W x H)</td><td>120 x 120 x 25mm</td></tr><tr><td>Net weight</td><td>187g</td></tr><tr><td>Max working temperature</td><td>60°C</td></tr></table><br></p>

All-in-One-Wasserkühlung, für NITRO+ AMD Radeon RX 7900 XT/XTX, 360 mm Radiator, 3x 120-mm-PWM-Lüfter, mit integrierter RGB-Beleuchtung

All-in-One-Wasserkühlung, für ASRock Radeon RX 7900 XT/XTX Taichi OC und Phantom Gaming OC, 360 mm Radiator, 3x 120-mm-PWM-Lüfter, mit integrierter RGB-Beleuchtung

<p style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"><span style="font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;">Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors!</span></p> <p style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"> </p> <p style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"><span style="font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;">Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system.</span></p> <div style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"> </div> <p style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"><span style="font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;">A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable!</span></p> <div style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"> </div> <p style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"><span style="font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;">The slanted edges of the nut make sure the O-ring sits tight against the HardTube, so that it is even more secure than in its predecessors. This provides more security in transport. </span></p> <div style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"> </div> <p style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"><span style="font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;">Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour.</span></p> <div style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"> </div> <p style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"><span style="font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: bold; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;">Model: HardTube Compression Fitting 12mm</span></p> <p style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"><span style="font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;">This connector has a 1/4" outer thread. The other side fits HardTubes with an outer diameter of 12mm. </span></p> <div style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"> </div> <p style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"><span style="font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: bold; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;">Technical Details</span></p> <ul style="margin-top: 0pt; margin-bottom: 0pt;"> <li style="list-style-type: disc; font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline;" dir="ltr"> <p style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"><span style="font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;">Material: brass</span></p> </li> <li style="list-style-type: disc; font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline;" dir="ltr"> <p style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"><span style="font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;">Colour: chrome</span></p> </li> </ul> <div style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"> </div> <p style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"><span style="font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: bold; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;">Dimensions</span></p> <ul style="margin-top: 0pt; margin-bottom: 0pt;"> <li style="list-style-type: disc; font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline;" dir="ltr"> <p style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"><span style="font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;">Diameter: 20mm</span></p> </li> <li style="list-style-type: disc; font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline;" dir="ltr"> <p style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"><span style="font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;">Height: 18mm (ca. 14mm when screwed in)</span></p> </li> </ul> <div style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"> </div> <p style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"><span style="font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: bold; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;">Scope of Delivery</span></p> <p style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"> </p> <ul style="margin-top: 0pt; margin-bottom: 0pt;"> <li style="list-style-type: disc; font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline;" dir="ltr"><span style="font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;"> 1x Alphacool Eiszapfen 12mm HardTube compression fitting G1/4 for carbon tubes (rigid or hard tubes) - knurled - chrome sixpack</span></li> </ul>

<p style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"><span style="font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;">Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors!</span></p> <div style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"> </div> <p style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"><span style="font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;">Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system.</span></p> <div style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"> </div> <p style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"><span style="font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;">A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable!</span></p> <div style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"> </div> <p style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"><span style="font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;">The slanted edges of the nut make sure the O-ring sits tight against the HardTube, so that it is even more secure than in its predecessors. This provides more security in transport. </span></p> <div style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"> </div> <p style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"><span style="font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;">Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour.</span></p> <div style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"> </div> <p style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"><span style="font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: bold; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;">Model: HardTube Compression Fitting 12mm</span></p> <p style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"><span style="font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;">This connector has a 1/4" outer thread. The other side fits HardTubes with an outer diameter of 12mm. </span></p> <div style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"> </div> <p style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"><span style="font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: bold; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;">Technical Details</span></p> <ul style="margin-top: 0pt; margin-bottom: 0pt;"> <li style="list-style-type: disc; font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline;" dir="ltr"> <p style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"><span style="font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;">Material: brass</span></p> </li> <li style="list-style-type: disc; font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline;" dir="ltr"> <p style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"><span style="font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;">Colour: deep black</span></p> </li> </ul> <div style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"> </div> <p style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"><span style="font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: bold; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;">Dimensions</span></p> <ul style="margin-top: 0pt; margin-bottom: 0pt;"> <li style="list-style-type: disc; font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline;" dir="ltr"> <p style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"><span style="font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;">Diameter: 20mm</span></p> </li> <li style="list-style-type: disc; font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline;" dir="ltr"> <p style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"><span style="font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;">Height: 18mm (ca. 14mm when screwed in)</span></p> </li> </ul> <div style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"> </div> <p style="line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;" dir="ltr"><span style="font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: bold; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;">Scope of Delivery</span></p> <p> </p> <ul style="margin-top: 0pt; margin-bottom: 0pt;"> <li style="list-style-type: disc; font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline;" dir="ltr"><span style="font-size: 13.333333333333332px; font-family: Arial; color: #333333; background-color: #ffffff; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;"> 1x Alphacool Eiszapfen 12mm HardTube compression fitting G1/4 for carbon tubes (rigid or hard tubes) - knurled - deep black sixpack</span></li> </ul>

<p>With the "Icicles", Alphacool has created a true masterpiece. These connections promise absolute tightness and high quality.<strong><br></strong></p><p> Suitable for all hard metal pipes with an outer diameter of 12mm. On the other side of the connection there is the usual ¼” thread. Available in deep black and chrome.</p><p> First, the union nut is put on the pipe, followed by a plastic washer that protects the O-ring and the thick O-ring itself. Now the pipe is simply put into the connection in which the second O-ring is already sitting, which fits very tightly against the pipe. As a last step, the union nut is pushed onto the connection and screwed on.</p><p> Due to the size, the union nut cannot be screwed on tightly enough. But this has also been thought of, as an 8 mm hexagon key can be inserted from below to hold the connection in place.</p><p> <strong>scope of delivery<br></strong></p><ul><li> 1x Alphacool Eiszapfen 12mm HardTube screw-on nozzle G1/4 - Chrome</li></ul>

<p>With the "Icicles", Alphacool has created a true masterpiece. These connections promise absolute tightness and high quality.<strong><br></strong></p><p> Suitable for all hard metal pipes with an outer diameter of 12mm. On the other side of the connection there is the usual ¼” thread. Available in deep black and chrome.</p><p> First, the union nut is put on the pipe, followed by a plastic washer that protects the O-ring and the thick O-ring itself. Now the pipe is simply put into the connection in which the second O-ring is already sitting, which fits very tightly against the pipe. As a last step, the union nut is pushed onto the connection and screwed on.</p><p> Due to the size, the union nut cannot be screwed on tightly enough. But this has also been thought of, as an 8 mm hexagon key can be inserted from below to hold the connection in place.</p><p> <strong>scope of delivery<br></strong></p><ul><li> 1x <span style="font-weight: normal;">Alphacool Eiszapfen 12mm HardTube screw-on nozzle G1/4 - Deep Black</span></li></ul>

<p style="text-align: justify;">Alphacools Eiszapfen Fitting series is the high-end version of the proven compression fitting!<br /><br />All requirements that are placed on a fitting are met here: Highflow, shape, processing and color scheme. Uncompromising development and manufacturing have made the Eiszapfen what they are. In brilliant white, they blend excellently into any system.<br /><br />Special processes are used to bond the coatings firmly to the substrate. The longevity of the intense colors is thus given and chipping of the coating is prevented. Each fitting has the Alphacool logo which makes it unmistakable in addition to its special shape!<br /><br />The beveled edges of the compression nut press the O-ring tightly against the hose, keeping it securely in place.<br /><br /><b>Sixpack:</b><br />Since six fittings of one type are often necessary, Alphacool also offers six-packs.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data</b></td></tr><tr><td>Dimensions (height x diameter)</td><td>27 x 20mm</td></tr><tr><td>Weight</td><td>30g</td></tr><tr><td>Material</td><td>Brass</td></tr><tr><td>Thread</td><td>1/4"</td></tr><tr><td>Tube connection</td><td>13/10mm</td></tr><tr><td>Color</td><td>white</td></tr></table><br><b>Warranty: 5 years</b><br><a href="https://www.alphacool.com/en/warranty-terms" target="_blank">???? Warranty Terms</a></p>

<p style="text-align: justify;">Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings!<br> <br> Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system.<br> <br> A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable!<br> <br> <strong>Model: 90° Socket 13/10mm</strong><br> This connector has a G¼” thread on one side and is thereby compatible with 95% of components. The other side fits a 13/10mm hose. The middle of this connector is turned at a 90° angle in order to prevent complicated hose connections. The threaded side is rotatable for maximum flexibility.</p> <table> <tbody> <tr> <td style="text-align: left;" colspan="2"><strong>Technical data</strong></td> </tr> <tr> <td>Material</td> <td>brass</td> </tr> <tr> <td>L x W x H</td> <td>34,5 x 20 x 33mm</td> </tr> <tr> <td>Threads</td> <td>G1/4" OT | 13/10mm (ID 3/8" OD 1/2")</td> </tr> <tr> <td>Thread length</td> <td>5mm</td> </tr> <tr> <td>Possible rotation</td> <td>360°</td> </tr> <tr> <td>Version</td> <td>90° angled</td> </tr> <tr> <td>Color</td> <td>chrome</td> </tr> </tbody> </table> <p> </p>

<p>Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: 90° Socket 13/10mm This connector has a ¼” thread on one side and is thereby compatible with 95% of components. The other side fits a 13/10mm hose. The middle of this connector is turned at a 90° angle in order to prevent complicated hose connections. The threaded side is rotatable for maximum flexibility. Technical Specifications: Material: Brass Colour: Chrome Dimensions: Length: 34.5mm Width: 20mm Height: 33mm Scope of Delivery: 1x Alphacool Eiszapfen 13/10mm compression fitting 90° rotatable G1/4 - chrome</p>

<p>Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors!</p> <p>Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system.</p> <p>A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable!</p> <p>Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour.</p> <p><strong>Model: 90° Socket 13/10mm</strong><br>This connector has a ¼” thread on one side and is thereby compatible with 95% of components. The other side fits a 13/10mm hose. The middle of this connector is turned at a 90° angle in order to prevent complicated hose connections. The threaded side is rotatable for maximum flexibility.</p> <p> </p> <p><strong>Technical Specifications:</strong></p> <ul> <li>Material: Brass</li> <li>Colour: Deep Black</li> </ul> <p><strong>Dimensions:</strong></p> <ul> <li>Length: 34,5mm</li> <li>Widht: 20mm</li> <li>Hight: 33mm</li> </ul> <p> </p> <p><strong>Scope of Delivery:</strong></p> <ul> <li>1x Alphacool Eiszapfen 13/10mm compression fitting 90° rotatable G1/4 - deep black</li> </ul>

<p>Alphacools Eiszapfen Fitting series is the high-end version of the proven compression fitting!</p> <p>All requirements that are placed on a fitting are met here: Highflow, shape, processing and color scheme. Uncompromising development and manufacturing have made the Eiszapfen what they are. In brilliant white, they blend excellently into any system.</p> <p>Special processes are used to bond the coatings firmly to the substrate. The longevity of the intense colors is thus given and chipping of the coating is prevented. Each fitting has the Alphacool logo which makes it unmistakable in addition to its special shape!</p> <p>The beveled edges of the compression nut press the O-ring tightly against the hose, keeping it securely in place.</p> <p> </p> <p><strong>Technical Specifications:</strong></p> <ul> <li>Material: Brass</li> <li>Colour: Crome</li> </ul> <p><strong>Dimensions:</strong></p> <ul> <li>Diameter: 20mm</li> <li>Height: 27mm</li> </ul> <p> </p> <p><strong>Scope of Delivery:</strong></p> <ul> <li>1x Alphacool Eiszapfen 13/10mm compression fitting G1/4 - Chrome</li> </ul>

<p>Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors!</p> <p>Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system.</p> <p>A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable!</p> <p>The connecting nut’s slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport.</p> <p>Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour.</p> <p><strong>Model: Straight Socket 13/10mm</strong><br>This connector has a ¼” thread on one side and is thereby compatible with 95% of components. The other side fits a 13/10mm hose.</p> <p><strong>Sixpack:</strong><br>Since six connectors of one type are frequently required, Alphacool now offers sixpacks. This has many advantages to your benefit!</p> <p> </p> <p><strong>Technical Specifications:</strong></p> <ul> <li>Material: Brass</li> <li>Colour: Chrome</li> </ul> <p><strong>Dimensions:</strong></p> <ul> <li>Diameter: 20mm</li> <li>Height: 27mm</li> </ul> <p> </p> <p><strong>Scope of Delivery:</strong></p> <ul> <li>1x Alphacool Eiszapfen 13/10mm compression fitting G1/4 - Chrome sixpack</li> </ul>

Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The connecting nut’s slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: Straight Socket 13/10mm This connector has a ¼” thread on one side and is thereby compatible with 95% of components. The other side fits a 13/10mm hose.   Technical Specifications: Material: Brass Colour: Deep Black Dimensions: Diameter: 20mm Height: 27mm   Scope of Delivery: 1x Alphacool Eiszapfen 13/10mm compression fitting G1/4 - deep black

<p>Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors!</p> <p>Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system.</p> <p>A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable!</p> <p>The connecting nut’s slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport.</p> <p>Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour.</p> <p><strong>Model: Straight Socket 13/10mm</strong><br>This connector has a ¼” thread on one side and is thereby compatible with 95% of components. The other side fits a 13/10mm hose.</p> <p><strong>Sixpack:</strong><br>Since six connectors of one type are frequently required, Alphacool now offers sixpacks. This has many advantages to your benefit!</p> <p> </p> <p><strong>Technical Specifications:</strong></p> <ul> <li>Material: Brass</li> <li>Colour: Deep Black</li> </ul> <p><strong>Dimensions:</strong></p> <ul> <li>Diameter: 20mm</li> <li>Height: 27mm</li> </ul> <p> </p> <p><strong>Scope of Delivery:</strong></p> <ul> <li>1x Alphacool Eiszapfen 13/10mm compression fitting G1/4 - deep black sixpack</li> </ul>

<p style="text-align: justify;">Alphacools Eiszapfen Fitting series is the high-end version of the proven compression fitting!<br /><br />All requirements that are placed on a fitting are met here: Highflow, shape, processing and color scheme. Uncompromising development and manufacturing have made the Eiszapfen what they are. In brilliant white, they blend excellently into any system.<br /><br />Special processes are used to bond the coatings firmly to the substrate. The longevity of the intense colors is thus given and chipping of the coating is prevented. Each fitting has the Alphacool logo which makes it unmistakable in addition to its special shape!<br /><br />The beveled edges of the compression nut press the O-ring tightly against the hose, keeping it securely in place.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data</b></td></tr><tr><td>Dimensions (height x diameter)</td><td>27 x 20mm</td></tr><tr><td>Weight</td><td>30g</td></tr><tr><td>Material</td><td>Brass</td></tr><tr><td>Thread</td><td>1/4"</td></tr><tr><td>Tube connection</td><td>13/10mm</td></tr><tr><td>Color</td><td>white</td></tr></table><br><b>Warranty: 5 years</b><br><a href="https://www.alphacool.com/en/warranty-terms" target="_blank">???? Warranty Terms</a></p>

<p style="text-align: justify;">Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings!<br /><br />Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system.<br /><br />A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable!<br /><br /><b>Model: 90° Socket 13/10mm</b><br />This connector has a G¼” thread on one side and is thereby compatible with 95% of components. The other side fits a 13/10mm hose. The middle of this connector is turned at a 90° angle in order to prevent complicated hose connections. The threaded side is rotatable for maximum flexibility.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data</b></td></tr><tr><td>Material</td><td>brass</td></tr><tr><td>L x W x H</td><td>34,5 x 20 x 33mm</td></tr><tr><td>Threads</td><td>G1/4" OT | 13/10mm (ID 3/8" OD 1/2")</td></tr><tr><td>Thread length</td><td>5mm</td></tr><tr><td>Possible rotation</td><td>360°</td></tr><tr><td>Version</td><td>90° angled</td></tr><tr><td>Color</td><td>black</td></tr></table><br><b>Warranty: 5 years</b><br><a href="https://www.alphacool.com/en/warranty-terms" target="_blank">???? Warranty Terms</a></p>

Anschraubtülle für Hadtubes, 13 mm Außendurchmesser, G¼-Gewinde, für Acryl- und Messingrohre, 6er Pack

<p>Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings!</p> <p>Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system.</p> <p>A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable!</p> <p>The union nut's slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport.</p> <p><strong>Model: 45° compression fitting 13mm plexi / brass tubes<br></strong>This fitting is suitable for 13mm plexi or brass tubes on both sides. This fitting is bent 45° in the middle to avoid complicated hose connections.</p> <p><strong>Technical Specifications</strong></p> <ul> <li>Material: brass</li> <li>Colour: chrome</li> </ul> <p><strong>Dimensions</strong></p> <ul> <li>Length: 46mm</li> <li>Width: 20mm</li> <li>Height: 33mm</li> </ul> <p><strong>Scope of Delivery</strong></p> <ul> <li>1x Alphacool Eiszapfen 13mm HardTube compression fitting 45° L-connector for plexi- brass tubes - chrome</li> </ul> <p> </p> <p>Fitting Map<br><a href="http://www.alphacool.com/shopware.php?sViewport=campaign&emotionId=2639" target="_blank">You can find an interactive map of all Alphacool fittings here.</a></p>

<p>Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings!</p> <p>Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system.</p> <p>A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable!</p> <p>The union nut's slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport.</p> <p><strong>Model: 45° compression fitting 13mm plexi / brass tubes<br></strong>This fitting is suitable for 13mm plexi or brass tubes on both sides. This fitting is bent 45° in the middle to avoid complicated hose connections.</p> <p><strong>Technical Specifications</strong></p> <ul> <li>Material: brass</li> <li>Colour: deep black</li> </ul> <p><strong>Dimensions</strong></p> <ul> <li>Length: 46mm</li> <li>Width: 20mm</li> <li>Height: 33mm</li> </ul> <p><strong>Scope of Delivery</strong></p> <ul> <li>1x Alphacool Eiszapfen 13mm HardTube compression fitting 45° L-connector for plexi- brass tubes - deep black</li> </ul> <p> </p> <p>Fitting Map<br><a href="http://www.alphacool.com/shopware.php?sViewport=campaign&emotionId=2639" target="_blank">You can find an interactive map of all Alphacool fittings here.</a></p>

<p>Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings!</p> <p>Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system.</p> <p>A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable!</p> <p>The union nut's slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport.</p> <p><strong>Model: 45° compression fitting 13mm<br></strong>This fitting has a 1/4" thread on one side and is thereby compatible with 95% of components. The other side fits a 13mm acrylic or brass tube. This fitting is bent 45° in the middle to avoid complicated hose connections. The threaded side is rotatable for maximum flexibility.</p> <p><strong>Technical Specifications</strong></p> <ul> <li>Material: brass</li> <li>Colour: chrome</li> </ul> <p><strong>Dimensions</strong></p> <ul> <li>Length: 44.5mm</li> <li>Width: 21mm</li> </ul> <p><strong>Scope of Delivery</strong></p> <ul> <li>1x Alphacool Eiszapfen 13mm HardTube compression fitting 45° rotatable G1/4 for plexi- brass tubes - chrome</li> </ul> <p> </p> <p>Fitting Map<br><a href="http://www.alphacool.com/shopware.php?sViewport=campaign&emotionId=2639" target="_blank">You can find an interactive map of all Alphacool fittings here.</a></p>

<p>Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings!</p> <p>Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system.</p> <p>A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable!</p> <p>The union nut's slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport.</p> <p><strong>Model: 45° compression fitting 13mm<br></strong>This fitting has a 1/4" thread on one side and is thereby compatible with 95% of components. The other side fits a 13mm acrylic or brass tube. This fitting is bent 45° in the middle to avoid complicated hose connections. The threaded side is rotatable for maximum flexibility.</p> <p><strong>Technical Specifications</strong></p> <ul> <li>Material: brass</li> <li>Colour: deep black</li> </ul> <p><strong>Dimensions</strong></p> <ul> <li>Length: 44.5mm</li> <li>Width: 21mm</li> </ul> <p><strong>Scope of Delivery</strong></p> <ul> <li>1x Alphacool Eiszapfen 13mm HardTube compression fitting 45° rotatable G1/4 for plexi- brass tubes - deep black</li> </ul> <p> </p> <p>Fitting Map<br><a href="http://www.alphacool.com/shopware.php?sViewport=campaign&emotionId=2639" target="_blank">You can find an interactive map of all Alphacool fittings here.</a></p>

<p>With the Alphacool Eiszapfen you connect your hardtubes at the perfect 90° angle. The hardtube is tightly screwed to the union nut, seals immediately and can be easily loosened with one hand.</p> <p><strong>Technical Details: </strong></p> <ul> <li>Width: 21 mm</li> <li>Length: 34 mm</li> <li>Height: 34 mm</li> <li>Material: brass</li> <li>Color: Chrome</li> </ul>

<p>With the Alphacool Eiszapfen you connect your hardtubes at the perfect 90° angle. The hardtube is tightly screwed to the union nut, seals immediately and can be easily loosened with one hand.</p> <p>The fitting can be rotated freely (360°) thanks to the 90° angle. The possibilities are almost limitless.</p> <p><strong>Technical Details</strong> </p> <ul> <li>Width: 34 mm</li> <li>Length: 34 mm</li> <li>Material: brass</li> <li>Color: Deep Black</li> </ul>

<p>Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings!</p> <p>Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system.</p> <p>A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable!</p> <p>The union nut's slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport.</p> <p><strong>Model: 90° compression fitting 13mm<br></strong>This fitting has a 1/4" thread on one side and is thereby compatible with 95% of components. The other side fits a 13mm acrylic or brass tube. This fitting is bent 90° in the middle to avoid complicated hose connections. The threaded side is rotatable for maximum flexibility.</p> <p><strong>Technical Specifications</strong></p> <ul> <li>Material: brass</li> <li>Colour: chrome</li> </ul> <p><strong>Dimensions</strong></p> <ul> <li>Length: 42.5mm</li> <li>Width: 21mm</li> </ul> <p><strong>Scope of Delivery</strong></p> <ul> <li>1x Alphacool Eiszapfen 13mm HardTube compression fitting 90° rotatable G1/4 for plexi- brass tubes - chrome</li> </ul> <p> </p> <p>Fitting Map<br><a href="http://www.alphacool.com/shopware.php?sViewport=campaign&emotionId=2639" target="_blank">You can find an interactive map of all Alphacool fittings here.</a></p>

<p>Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings!</p> <p>Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system.</p> <p>A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable!</p> <p>The union nut's slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport.</p> <p><strong>Model: 90° compression fitting 13mm<br></strong>This fitting has a 1/4" thread on one side and is thereby compatible with 95% of components. The other side fits a 13mm acrylic or brass tube. This fitting is bent 90° in the middle to avoid complicated hose connections. The threaded side is rotatable for maximum flexibility.</p> <p><strong>Technical Specifications</strong></p> <ul> <li>Material: brass</li> <li>Colour: deep black</li> </ul> <p><strong>Dimensions</strong></p> <ul> <li>Length: 42.5mm</li> <li>Width: 21mm</li> </ul> <p><strong>Scope of Delivery</strong></p> <ul> <li>1x Alphacool Eiszapfen 13mm HardTube compression fitting 90° rotatable G1/4 for plexi- brass tubes - deep black</li> </ul> <p> </p> <p>Fitting Map<br><a href="http://www.alphacool.com/shopware.php?sViewport=campaign&emotionId=2639" target="_blank">You can find an interactive map of all Alphacool fittings here.</a></p>

<p style="text-align: justify;">Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings!<br /><br />Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system.<br /><br />A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable!<br /><br />The union nut's slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport.<br /><br /><b>Model: 90° compression fitting 13mm</b><br />This fitting has a G1/4" thread on one side and is thereby compatible with 95% of components. The other side fits a 13mm acrylic or brass tube. This fitting is bent 90° in the middle to avoid complicated hose connections. The threaded side is rotatable for maximum flexibility.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data</b></td></tr><tr><td>Material</td><td>brass</td></tr><tr><td>L x W</td><td>42,5 x 21mm</td></tr><tr><td>Threads</td><td>G1/4" OT | 13mm (OD 1/2")</td></tr><tr><td>Thread length</td><td>5mm</td></tr><tr><td>Possible rotation</td><td>360°</td></tr><tr><td>Version</td><td>90° angled</td></tr><tr><td>Color</td><td>chrome</td></tr></table><br><b>Warranty: 5 years</b><br><a href="https://www.alphacool.com/en/warranty-terms" target="_blank">???? Warranty Terms</a></p>

<p>Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors!</p> <p>Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system.</p> <p>A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable!</p> <p>The connecting nut’s slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport.</p> <p>Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour.</p> <p><strong>Model: HardTube Socket 13mm</strong><br>This connector has a ¼” external screw thread on one side. The other side fits HardTubes with an external diameter of 13mm.</p> <p><strong>Technical Specifications:</strong></p> <ul> <li>Material: Brass</li> <li>Colour: Chrome</li> </ul> <p><strong>Dimensions:</strong></p> <ul> <li>Diameter: 21mm</li> <li>Height: 16mm</li> </ul> <p><strong>Scope of Delivery:</strong></p> <ul> <li>1x Alphacool Eiszapfen 13mm HardTube compression fitting G1/4 for plexi- brass tubes (rigid or hard tubes) - knurled - chrome</li> </ul> <p><strong> </strong></p>

Anschraubtülle für Hadtubes, 13 mm Außendurchmesser, G¼-Gewinde, für Acryl- und Messingrohre, 6er Pack

<p>Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors!</p> <p>Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system.</p> <p>A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable!</p> <p>The connecting nut’s slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport.</p> <p>Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour.</p> <p><strong>Model: HardTube Socket 13mm</strong><br>This connector has a ¼” external screw thread on one side. The other side fits HardTubes with an external diameter of 13mm.</p> <p> </p> <p><strong>Technical Specifications:</strong></p> <ul> <li>Material: Brass</li> <li>Colour: Deep Black</li> </ul> <p><strong>Dimensions:</strong></p> <ul> <li>Diameter: 21mm</li> <li>Height: 16mm</li> </ul> <p><strong>Scope of Delivery:</strong></p> <ul> <li>1x Alphacool Eiszapfen 13mm HardTube compression fitting G1/4 for plexi- brass tubes (rigid or hard tubes) - knurled - deep black</li> </ul>

<p style="text-align: justify;">Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings!<br /><br />Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system.<br /><br />A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable!<br /><br />The union nut's slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport.<br /><br /><b>Model: 90° compression fitting 13mm</b><br />This fitting has a G1/4" thread on one side and is thereby compatible with 95% of components. The other side fits a 13mm acrylic or brass tube. This fitting is bent 90° in the middle to avoid complicated hose connections. The threaded side is rotatable for maximum flexibility.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data</b></td></tr><tr><td>Material</td><td>brass</td></tr><tr><td>L x W</td><td>42,5 x 21mm</td></tr><tr><td>Threads</td><td>G1/4" OT | 13mm (OD 1/2")</td></tr><tr><td>Thread length</td><td>5mm</td></tr><tr><td>Possible rotation</td><td>360°</td></tr><tr><td>Version</td><td>90° angled</td></tr><tr><td>Color</td><td>black</td></tr></table><br><b>Warranty: 5 years</b><br><a href="https://www.alphacool.com/en/warranty-terms" target="_blank">???? Warranty Terms</a></p>

<p>The Alphacool Eiszapfen HardTube fittings are among the most popular HardTube water cooling fittings on the market. They are characterized by their high processing quality and the triple sealing system.<br><br><strong>High quality coating</strong><br>Alphacool uses advanced chromating to apply the paint to the brass connection. This not only makes the paint more even; it is also much more durable and resistant to external influences. The small Alphacool logo is lasered in and not printed. Therefore, it cannot be removed by friction.<br><br><strong>Triple seal</strong><br>Tightness is essential for a water loop. Alphacool uses three sealing O-rings for these Eiszapfen fittings which seal against the Tube. Two O-rings are integrated in the fitting, while the third O-ring serves as a seal and is attached together with the HardTube. The union nut compresses the O-ring ensuring a tight seal. This not only provides a triple lock, but also increases the tensile strength of the HardTube. This means that it requires considerable force to pull the HardTube out of a tightened fitting.<br><br><strong>Assembly</strong><br>Remove the union nut together with the O-ring inside. The connection is then screwed to any component with G1/4" thread. Insert deburred HardTube then put the O-ring and the union nut over them. The last step is to screw the union nut to the fitting.<br><br><strong>Technical data:</strong><br>L x D: 22.2 x 22 mm<br>Thread length: 5 mm<br>Material: Brass<br>Connection thread: G1/4".<br>Colour: Chrome<br><br>Compatible with all HardTubes with 14mm outer diameter.<br><br><strong>Download data sheet PDF: <a title="Alphacool Eiszapfen 14mm HardTube compression fitting G1/4 - knurled - deep black data sheet" href="http://www.alphacool.com/download/ENG_1019797_Eiszapfen_14mm_HT_Chrome.pdf" target="_blank">Alphacool Eiszapfen 14mm HardTube compression fitting G1/4 - knurled - chrome</a></strong></p>

<p>The Alphacool Eiszapfen HardTube fittings are among the most popular HardTube water cooling fittings on the market. They are characterized by their high processing quality and the triple sealing system.<br><br><strong>High quality coating</strong><br>Alphacool uses advanced chromating to apply the paint to the brass connection. This not only makes the paint more even; it is also much more durable and resistant to external influences. The small Alphacool logo is lasered in and not printed. Therefore, it cannot be removed by friction.<br><br><strong>Triple seal</strong><br>Tightness is essential for a water loop. Alphacool uses three sealing O-rings for these Eiszapfen fittings which seal against the Tube. Two O-rings are integrated in the fitting, while the third O-ring serves as a seal and is attached together with the HardTube. The union nut compresses the O-ring ensuring a tight seal. This not only provides a triple lock, but also increases the tensile strength of the HardTube. This means that it requires considerable force to pull the HardTube out of a tightened fitting.<br><br><strong>Assembly</strong><br>Remove the union nut together with the O-ring inside. The connection is then screwed to any component with G1/4" thread. Insert deburred HardTube then put the O-ring and the union nut over them. The last step is to screw the union nut to the fitting.<br><br><br>L x D: 22.2 x 22 mm<br>Thread length: 5 mm<br>Material: Brass<br>Connection thread: G1/4".<br>Colour: Chrome<br><br>Compatible with all HardTubes with 14mm outer diameter.<br><br><br><strong>Download data sheet PDF: <a title="Alphacool Eiszapfen 14mm HardTube compression fitting G1/4 - knurled - deep black data sheet" href="http://www.alphacool.com/download/ENG_1019799_Eiszapfen_14mm_HT_Chrome_Box.pdf" target="_blank">Alphacool Eiszapfen 14mm HardTube compression fitting G1/4 - knurled - chrome sixpack</a></strong></p>

<p>The Alphacool Eiszapfen HardTube fittings are among the most popular HardTube water cooling fittings on the market. They are characterized by their high processing quality and the triple sealing system.<br><br><strong>High quality coating</strong><br>Alphacool uses advanced chromating to apply the paint to the brass connection. This not only makes the paint more even; it is also much more durable and resistant to external influences. The small Alphacool logo is lasered in and not printed. Therefore, it cannot be removed by friction.<br><br><strong>Triple seal</strong><br>Tightness is essential for a water loop. Alphacool uses three sealing O-rings for these Eiszapfen fittings which seal against the Tube. Two O-rings are integrated in the fitting, while the third O-ring serves as a seal and is attached together with the HardTube. The union nut compresses the O-ring ensuring a tight seal. This not only provides a triple lock, but also increases the tensile strength of the HardTube. This means that it requires considerable force to pull the HardTube out of a tightened fitting.<br><br><strong>Assembly</strong><br>Remove the union nut together with the O-ring inside. The connection is then screwed to any component with G1/4" thread. Insert deburred HardTube then put the O-ring and the union nut over them. The last step is to screw the union nut to the fitting.<br><br><strong>Technical data:</strong><br>L x D: 22.2 x 22 mm<br>Thread length: 5 mm<br>Material: Brass<br>Connection thread: G1/4".<br>Colour: Black<br><br>Compatible with all HardTubes with 14mm outer diameter.<br><br><strong>Download data sheet PDF: <a title="Alphacool Eiszapfen 14mm HardTube compression fitting G1/4 - knurled - deep black data sheet" href="http://www.alphacool.com/download/ENG_1019798_Eiszapfen_14mm_HT_Black_Box.pdf" target="_blank">Alphacool Eiszapfen 14mm HardTube compression fitting G1/4 - knurled - deep black sixpack</a></strong></p>