The device comes bundled with two enclosures so you can choose the design you like best.The cAP ac is a very capable and powerful wireless access point that looks beautiful on both walls and ceilings. The concurrent dual band wireless radio supports dual chain 2 GHz and 5 GHz in 802.11ac and legacy standards and will provide coverage in 360 degrees around it. Even though the radio supports repeater mode the two Ethernet ports give you the ability to extend your network with cables even if PoE power is required since the cAP ac supports 802.3af/at PoE input on the first port and passive PoE output (up to 57V) on the second port. The cAP ac is a feature packed device with a sleek enclosure that can become inconspicuous with the push of a button - the customizable mode button in the device center will turn off all lights and sounds at it’s default configuration but can be reconfigured to launch any RouterOS script.The cAP ac is equipped with two Ethernet ports allowing you to connect another device to further extend your network. What’s more the second Ethernet port supports passive PoE output (up to 57 V) so it can power a wide variety of RouterBOARDs and other devices like IP cameras. In the following scenario you can use a central hEX PoE device to power all your cAP ac units and then have cAP lite units connected to provide even better coverage. The hEX PoE can even be used as a CAPsMAN server so you can easily manage all your access points and control all their settings in a single device. We sell cAP ac (International) 2412-2484MHz and 5150MHz-5875MHz range
The cAP lite is a tiny access point device with a clean and simple design which will blend into any environment. Perfect for public locations and hospitality businesses like hotels airports shopping malls etc. where you can easily place it out of sight or customise it’s looks to make it even less conspicuous. Included with the product are two different casings which can easily be swapped out or if you really like to fit the design with the environment we are providing 3D printer friendly design files. The customisation possibilities are endless. The cAP lite supports 802.11b/g/n and can be powered by power over ethernet. It’s a perfect companion for the MikroTik CAPsMAN (controlled AP system manager) allowing you to control all your AP devices from one central location. The cAP lite can also be used as a stand alone access point with the full potential of RouterOS.
This powerful and affordable router crushes all previous CCR models in single-core performance.Like the other models in CCR2004 series this CCR also features the Annapurna Labs Alpine v2 CPU with 4x 64-bit ARMv8-A Cortex-A57 cores running at 1 7GHz. But here’s the difference. This powerful router crushes all previous CCR models in single-core performance and that is the most important aspect when it comes to heavy operations based on per-connection processing. Like queues for example.The new router has 18 wired ports including 16x Gigabit Ethernet ports and two 10G SFP+ cages. It also has a full-size USB and RJ-45 console port on the front panel.Like all CCR devices it comes in a classic white 1U rackmount case. Built-in dual redundant power supplies are included so you have one less thing to worry about. And of course there is active cooling to keep things nice and cool.Each group of 8 Gigabit Ethernet ports is connected to a separate Marvell Amethyst family switch-chip. Each switch chip has a 10 Gbps full-duplex line connected to the CPU. The same goes for each SFP+ cage - a separate 10 Gbps full-duplex line. Boards come with 4GB of DDR4 RAM and 128MB of NAND storage.
CCR2004-1G-12S+2XSThe Connectivity Router - your best companion when it comes to SFP SFP+ and SFP28 management! 1 10 and 25 Gbps ports in a single device to make your life easier.The “Improvise. Adapt. Overcome.” mindset can be very helpful but sometimes you simply need a device that works and solves the problem without additional tinkering. The CCR2004-1G-12S+2XS does just that – forget about all connectivity troubles and expand your setup in any way you please. This handy router features 12 x 10G SFP+ and 2 x 25G SFP28 ports.CCR2004-1G-12S+2XS is Mikrotik router with the most powerful single-core performance so far. It provides incredible results in single tunnel (up to 3.4 Gbps) and BGP feed processing.Be prepared for anything: 10G 40G and now 25G! Paired with such MikroTik multiport products as CRS317-1G-16S+RM CRS312-4C+8XG-RM and CRS326-24S+2Q+RM your networking setup will know no bounds. Performance-wise CCR2004-1G-12S+2XS is on par with the renowned CCR1009/CCR1016 routers. And with dual redundant power supply you can forget about unexpected downtime! With its elaborate port configuration the new CCR2004-1G-12S+2XS is the perfect addition to any professional networking arsenal – it will save you tons of time in some tricky situations!
Mikrotik wanted to see the full potential of the good old reliable 10G networking combined with a modern CPU. CCR2116-12G-4S+ allows you to forget about CPU limitations in your setup. Like its younger brother – the amazing CCR2004 this router features the mighty Amazon Annapurna Labs Alpine CPU.But with 16 cores running at 2 GHz this CCR eats the other one for breakfast. For example Mikrotik see at least a 15% increase in single-core performance. And that is the most important aspect when it comes to heavy operations based on per-connection processing. Like queues for example. CCR2116-12G-4S+ sets a new standard of single-core performance in the whole CCR product family!Obviously you need the right connectivity to harness this power. There are four 10G SFP+ ports. They have a separate full-duplex line connected to the Marvell Amethyst family switch chip. Then we have Gigabit Ethernet ports. 12 of them are running through the Marvel chip. And there is another Gigabit port connected directly to the CPU for management purposes.Each group of 4 ports has a separate full-duplex connection to the switch chip. No bottlenecks here. You can expect switch-like throughput in most setups.The new generation of processors offers mind-blowing performance. If you look at the CCR1036 — the powerhouse with a 36 core CPU the new CCR2116 can easily double the performance. 16 cores vs 36 cores. Double the performance. There is also an M.2 PCIe slot. It supports SSD`s up to 8 terabytes. This could be extremely useful for all kinds of Container apps.If you are a rather large ISP dealing with dynamic routing massive BGPs complex firewall rules and intricate quality of service configurations.This is the right device for you. Combination of raw power and utility with the reliable 10G networking. And yes like with any ISP-level device Mikrotik have included a dual-redundant power supply. So you have one less thing to worry about.
CRS106-1C-5S The Cloud Router Switch 106-1C-5S is a desktop size smart switch equipped with one Gigabit Ethernet / SFP combo port and five 1.25Gbps SFP cages. The package includes a power supply. Powered by a 400MHz CPU and 128MB RAM it runs RouterOS with a L5 license and supports 11- 30V power. Low price of this product provides a market leading solution for connecting up to six SFP devices. Switching resultsCRS106-1C-5S ModeConfiguration64 byte512 byte1518 bytekppsMbpskppsMbpskppsMbpsSwitchingNon blocking Layer 2 throughput10 416.75 333.31 644.76 736.8568.96 909.0SwitchingNon blocking Layer 2 capacity10 416.710 666.71 644.713 473.7568.913 817.9SwitchingNon blocking Layer 1 throughput10 416.77 000.01 644.77 000.0568.97 000.0SwitchingNon blocking Layer 1 capacity10 416.714 000.01 644.714 000.0568.914 000.0
CRS112-8P-4S-IN is eight Gigabit RJ45 ports PoE switch that offers different power output options: autosensing 802.3af/at PoE/PoE+ and Passive PoE and four SFP ports provide optical fiber connectivity options to support uplinks of up to 1 Gbps.CRS112-8P-4S-IN is equipped with 12 independent switching ports. 28 V 3.4 A power supply is already included in the box. There is secondary DC jack on the back of the enclosure that supports 48-57 V power supply (not included can be purchased separately). CRS112-8P-4S-IN can power 802.3af/at devices if 48-57 V DC input is used (unit will automatically detect and provide correct power to devices). Max current is 1 A per port if input voltage is 18-28 V 450 mA if 48-57 V. Total limit is 2.8A@24V and 1.4A@48-57V. • Non-blocking Layer 2 switching capacity• 16K host table• IEEE 802.1Q VLAN• Supports up to 4K simultaneous VLANs• Port isolation• Port security• Broadcast storm control• Port mirroring of ingress/egress traffic• Rapid Spanning Tree Protocol• Access Control List• MikroTik neighbor discovery• SNMP• 9204-byte jumbo frames support• IGMP snooping• static link aggregation
The CRS305 is a compact yet very powerful switch featuring four SFP+ ports for up to 10 Gbit per port. The device has a 1 Gbit copper ethernet port for management access and two DC jacks for power redundancy. The device is a very sleek and compact metallic case without any fans for silent operation.The device has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS. If you prefer to have a simplified operating system with only switch specific features use SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS use RouterOS. You can select the desired operating system from RouterOS from SwOS or from the RouterBOOT loader settings. All the feature set comes with a disruptive price providing the best price/performance on the market.5 Port PoE-Switch 802.3af/at PoE/PoE+ and 12-57 V passives PoE. Cloud Router Switch with 1 Gigabit Ethernet Port and 4 SFP+ Ports. Dualboot - RouterOS or SwOS.
The CRS309-1G-8S+ is a very compact yet powerful networking switch. It has eight SFP+ slots supporting up to 10 Gbit module in each which results in a total switching capacity of 162 Gbps and total non-blocking throughput of 81 Gbps.The device also has dual-core 800 MHz CPU 512 MB RAM a management Ethernet port with PoE power input RS232 serial port a grounding terminal and is capable of dual boot (choose which operating system you prefer RouterOS or SwOS).The compact and sleek metallic enclosure also acts as a heatsink making this device passively cooled - no fan noise and no dust accumulation inside. Special rackmount ears for installing unit into the standard rack are provided.
Remove the bottleneck from your network setup – it is time to upgrade that 1 Gigabit switch to something truly powerful and enjoy real speed. Introducing CRS312-4C+8XG-RM – our first product with 10G RJ45 Ethernet ports. Moreover it also has 4 x 10G combo ports: use them for 10G RJ45 Ethernet or 10G SFP+ when you need an additional fiber connection. Combo ports can be used alongside the 8 regular 10G RJ45 Ethernet ports at all times. These ports can also be software selected so you can use RouterOS scripting to decide which combo ports will be active.This device is a practical solution for those who work with huge data files and need fast capable connection 24/7: multimedia production scientific research game development big data analysis and so on. CRS312-4C+8XG-RM has a dual power supply for redundancy – no unexpected downtime when the deadlines are looming. It has a full size USB a console port for configuration and a 1U rackmount case – fits all the standard racks.You can choose between our legendary feature-packed RouterOS for booting or a simpler but still powerful SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS use RouterOS.This switch has a great total non-blocking throughput of 120 Gbps switching capacity of 240 Gbps and forwarding rate of 178 Mpps. CRS312-4C+8XG-RM – built for professionals great for everyone!
CRS317-1G-16S+RM The new Cloud Router Switch 317-1G-16S+RM is a rack-mountable manageable switch with Layer3 features it has 16 SFP+ ports for high performance 10GbE connectivity and a 1GbE copper port for management. CRS317-1G-16S+RM is powered by a next generation switching chip giving you wire speed performance for all sixteen 10GbE ports with any Ethernet frame size. New features such as hardware-based Spanning Tree Protocol and Link Aggregation (LACP) provide enhanced protection and true professional performance for your demanding network.The unit has dual redundant power supplies and passive cooling case so it’s completely silent - for hot environments two redundant fans will automatically keep the system cool if needed.It gives you all the basic functionality for a managed switch plus more: allows to manage port-to-port forwarding apply MAC filter configure VLANs mirror traffic apply bandwidth limitation and even adjust some MAC and IP header fields. SFP+ cages supports both 1.25 Gb SFP and 10 Gb SFP+ modules. SwOS Features Boot option for SwOS or RouterOS • Non-blocking Layer 2 switching capacity • 16K host table • IEEE 802.1Q VLAN • Supports up to 4K simultaneous VLANs • Port isolation • Port security • Web-based GUI • 800 Mhz CPU • Broadcast storm control • Port mirroring of ingress/egress traffic • Rapid Spanning Tree Protocol • Link Aggregation (LACP) • Access Control List • MikroTik neighbour discovery • SNMP v2/v3 • rackmount and tabletop Switching results CRS317-1G-16S+RM Mode Configuration 64 byte 512 byte 1518 byte kpps Mbps kpps Mbps kpps Mbps Switching Non blocking Layer 2 throughput 239 583.3 122 666.7 37 828.9 154 947.4 13 085.2 158 906.4 Switching Non blocking Layer 2 capacity 239 583.3 245 333.3 37 828.9 309 894.7 13 085.2 317 812.7 Switching Non blocking Layer 1 throughput 239 583.3 161 000.0 37 828.9 161 000.0 13 085.2 161 000.0 Switching Non blocking Layer 1 capacity 239 583.3 322 000.0 37 828.9 322 000.0 13 085.2 322 000.0
A home network setup doesn’t have to be a compromise. This compact and quiet switch is packing some serious server room grade features: a pair of 10G SFP+ cages 512 MB of RAM 24 Gigabit Ethernet ports and a sufficient built-in CPU that can handle basic home user needs such as firewall NAT and even some VPN.Like many other MikroTik switches CRS326-24G-2S+IN offers the dual boot option that allows you to use either the lightweight SwOS or the advanced RouterOS. The compact and quiet fanless desktop case makes this switch the perfect addition to the best home setups. And it is very easy to transport! But make no mistake – this small switch has all the power and features of its bigger rackmount analogue – the CRS326-24G-2S+RM nothing has been removed!CRS326-24G-2S+IN provides all the basic functionality for a managed switch and even more: port-to- port forwarding MAC filtering VLAN configuration traffic mirroring bandwidth limitation and even adjust some MAC and IP header fields. SFP+ cage supports both 1.25G SFP and 10G SFP+ modules.
CRS326-24G-2S+RM SwOS/RouterOS powered 24 port Gigabit Ethernet switch with two SFP+ ports wire speed connectivity with several new switching features! It has “Dual boot” feature that allows you to choose which operating system you prefer to use RouterOS or SwOS. If you prefer to have a simplified switch only OS with more switch specific features use SwOS. If you are used to Winbox and would like the ability to use routing and other Layer 3 features on some ports in your CRS boot and use RouterOS. You can select the desired operating system from RouterOS from SwOS or from the RouterBOOT loader settings. It gives you all the basic functionality for a managed switch plus more: allows to manage port-to-port forwarding apply MAC filter configure VLANs mirror traffic apply bandwidth limitation and even adjust some MAC and IP header fields. SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules. SwOS Features • Non-blocking Layer 2 switching capacity• 16K host table• IEEE 802.1Q VLAN• Supports up to 4K simultaneous VLANs• Port isolation• Port security• Broadcast storm control• Port mirroring of ingress/egress traffic• Rapid Spanning Tree Protocol• Access Control List• MikroTik neighbor discovery• SNMP v1• Web-based GUI Switching results CRS326-24G-2S+RM ModeConfiguration64 byte512 byte1518 bytekppsMbpskppsMbpskppsMbpsSwitchingNon blocking Layer 2 throughput65 476.233 523.810 338.342 345.93 576.143 427.8SwitchingNon blocking Layer 2 capacity65 476.267 047.610 338.384 691.73 576.186 855.7SwitchingNon blocking Layer 1 throughput65 476.244 000.010 338.344 000.03 576.144 000.0SwitchingNon blocking Layer 1 capacity65 476.288 000.010 338.388 000.03 576.188 000.0 Ethernet test results CRS326-24G-2S+RM98DX3236A1 all port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)81.3987.3235962.6296151.6Bridging25 bridge filter rules81.3987.390.7371.590.946.5Routingnone (fast path)81.3987.3235962.6261.9134.1Routing25 simple queues81.3987.3112.6461.2111.557.1Routing25 ip filter rules59.8726.261.4251.559.530.5
If you are working with substantial amount of data – like providing Internet access or maintaining a huge data center – this is the perfect upgrade for your setup. CRS326-24S+2Q+RM is our first product with 40 Gbps QSFP+ ports for remarkably fast and stable fiber connection.Overall it has two 40 Gbps QSFP+ ports and twenty four 10 Gbps SFP+ ports which provides total nonblocking throughput of 320 Gbps and switching capacity of 640 Gbps with forwarding rate of 252 Mpps with most common packets.CRS326-24S+2Q+RM is easy to manage – it has a full size USB port for configuration and dual power supply for redundancy – no unexpected downtime your clients and colleagues will be thankful!You can choose between our legendary feature-packed RouterOS for booting or a simpler but still powerful SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS use RouterOS. Switching results CRS326-24S+2Q+RM Mode Configuration 1518 byte 512 byte 64 byte kpps Mbps kpps Mbps kpps Mbps Switching Non blocking Layer 2 throughput 26 015.9 315 937.5 75 211.5 308 066.2 476 339.3 243 885.7 Switching Non blocking Layer 2 capacity 26 015.9 631 874.9 75 211.5 616 132.3 476 339.3 487 771.4 Switching Non blocking Layer 1 throughput 26 015.9 320 100.0 75 211.5 320 100.0 476 339.3 320 100.0 Switching Non blocking Layer 1 capacity 26 015.9 640 200.0 75 211.5 640 200.0 476 339.3 640 200.0
CRS328-24P-4S+RM CRS328-24P-4S+RM is a 28 independent port switch it has 24 Gigabit Ethernet ports which offer different power output options: Passive PoE low voltage PoE 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing. The four SFP+ ports provide up to 10 Gbps connectivity options via either optical fiber or Ethernet modules (not included). CRS328-24P-4S+RM comes in a 1U rackmount case with 100-240 V AC 500 W power supply built-in. The device consumes up to 44 W leaving guaranteed 450 W (3x150 W per every 8 Ethernet ports) to power your PoE devices. Each port can provide up to 30 W with high voltage and 26 W with low voltage power output. The device has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS. If you prefer to have a simplified operating system with only switch specific features use SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS use RouterOS. You can select the desired operating system from RouterOS from SwOS or from the RouterBOOT loader settings. All the feature set comes with our disruptive price providing best price/performance on the market. Switching Features • Non-blocking Layer 2 switching capacity • 16K host table • IEEE 802.1Q VLAN • Supports up to 4K simultaneous VLANs • Port isolation • Port security • Broadcast storm control • Port mirroring of ingress/egress traffic • STR / RSTP / MSTP • Access Control List • MikroTik neighbour discovery • SNMP • 10218-byte jumbo frames support • IGMP snooping • SNMP v2/v3 • rackmount• IEEE 802.3ad and static link aggregation Switching results CRS328-24P-4S+RM Mode Configuration 64 byte 512 byte 1518 byte kpps Mbps kpps Mbps kpps Mbps Switching Non blocking Layer 2 throughput 95 238.1 48 761.9 15 037.6 61 594.0 5 201.6 63 167.8 Switching Non blocking Layer 2 capacity 95 238.1 97 523.8 15 037.6 123 188.0 5 201.6 126 335.5 Switching Non blocking Layer 1 throughput 95 238.1 64 000.0 15 037.6 64 000.0 5 201.6 64 000.0 Switching Non blocking Layer 1 capacity 95 238.1 128 000.0 15 037.6 128 000.0 5 201.6 128 000.0 Ethernet test results CRS328-24P-4S+RM 98DX3236A1 all port test Mode Configuration 1518 byte 512 byte 64 byte kpps Mbps kpps Mbps kpps Mbps Bridging none (fast path) 81.3 987.3 235 962.6 296 151.6 Bridging 25 bridge filter rules 81.3 987.3 90.7 371.5 90.9 46.5 Routing none (fast path) 81.3 987.3 235 962.6 261.9 134.1 Routing 25 simple queues 81.3 987.3 112.6 461.2 111.5 57.1 Routing 25 ip filter rules 59.8 726.2 61.4 251.5 59.5 30.5
CRS354-48G-4S+2Q+RMBest price and best performance on the market – this 48 port switch will rock any setup including 40 Gbps devices!If you are looking for a single switch that will put your network setup ahead of the curve without costing a fortune look no further. The new CRS354-48G-4S+2Q+RM is an effective and adaptable rackmount solution for managing networks in demanding and busy environments. With this product Mikrotik aim to set a new price-performance bar – get more features while spending way less!High-end performance for the masses: more 10G ports and even 40G ports because speed matters.The 48 port champion you’ve been waiting for– the bargain of the decade!This powerful switch has 48 x 1G RJ45 ports and 4 x 10G SFP+ ports. There are also 2 x 40G QSFP+ ports for extremely fast fiber connections or linking with other 40 Gbps devices.The total non-blocking throughput is 168 Gbps switching capacity is 336 Gbps and the forwarding rate reaches 235 Mpps.Included parts
CRS354-48P-4S+2Q+RMIf you are looking for a single switch that will put your network setup ahead of the curve and power all the necessary devices – look no further! The new CRS354-48P-4S+2Q+RM is an effective and adaptable rackmount solution for managing networks in the most demanding environments. Unlike many other switches out there Mikrotik products are made with the system administrator in mind. This powerful switch has 48 x 1G RJ45 ports and 4 x 10G SFP+ ports. There are also 2 x 40G QSFP+ ports for extremely fast fiber connections or linking with other 40 Gbps devices. All 48 Ethernet ports offer different power output options: Passive PoE low voltage PoE 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing making this switch the easiest solution to power even the largest setups. Mikrotik have included a mighty power supply that can provide 750 W of power – this switch can handle a lot. And there is a special bracket for easy cable management. CRS354-48P-4S+2Q+RM is extremely functional and it has the best price-point on the market – it will make the perfect addition to a professional setup. The total non-blocking throughput is 168 Gbps switching capacity is 336 Gbps and the forwarding rate reaches 235 Mpps.Included parts
Cloud Smart Switch 326-24G-2S+RM is SwOS powered 24 port Gigabit Ethernet switch with two SFP+ ports in 1U rackmount case that provides wire speed connectivity with several new switching features. It gives you all the basic functionality for a managed switch plus more: allows to manage port-to-port forwarding apply MAC filter configure VLANs mirror traffic apply bandwidth limitation and even adjust some MAC and IP header fields. SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules.
With netPower Lite 7R switch you can forget about expensive GPON base stations and optical splitters. This switch is a part ofr GPEN concept – aimed to bring the speed and versatility of fiber networking while using the advantages of Ethernet. It is an easy to deploy low-cost way for any ISP to deliver the Internet to individual apartments.With this switch you won’t have to worry about power issues as there are many options. netPower Lite 7R has 7 reverse PoE ports. Depending on your setup netPower can draw the necessary power even from a single client! Ethernet port 8 can power other PoE capable devices with the same voltage as applied to the unit. There is also a DC jack and a 2-pin terminal for alternative powering.The outdoor enclosure allows you to install this switch in all kinds of environments – from damp attics to elevator shafts and different poles with hose clamps. netPower Lite 7R has a non-blocking throughput of 28 Gbps switching capacity of 56 Gbps and forwarding rate of 41.7 Mpps.The power supply is NOT included with the product- must be purchased separately.
Eight 1G Ethernet ports and two SFP+ ports for 10G fiber connectivity. Portable powerful and extremely cost-effective – this switch is an instant classic!Cloud Smart Switch 610-8G-2S+IN is our answer to the everlasting demand for more power in a small and simple package. It comes with the lightweight SwOS which is easy to configure from your web browser. It gives you all the basic functionality for a managed switch and more: you can manage port-to-port forwarding broadcast storm control apply MAC filters configure VLANs mirror traffic apply bandwidth limitation and even adjust some MAC and IP header fields.
