With netPower Lite 7R switch you can forget about expensive GPON base stations and optical splitters. This switch is a part ofr GPEN concept – aimed to bring the speed and versatility of fiber networking while using the advantages of Ethernet. It is an easy to deploy low-cost way for any ISP to deliver the Internet to individual apartments.With this switch you won’t have to worry about power issues as there are many options. netPower Lite 7R has 7 reverse PoE ports. Depending on your setup netPower can draw the necessary power even from a single client! Ethernet port 8 can power other PoE capable devices with the same voltage as applied to the unit. There is also a DC jack and a 2-pin terminal for alternative powering.The outdoor enclosure allows you to install this switch in all kinds of environments – from damp attics to elevator shafts and different poles with hose clamps. netPower Lite 7R has a non-blocking throughput of 28 Gbps switching capacity of 56 Gbps and forwarding rate of 41.7 Mpps.The power supply is NOT included with the product- must be purchased separately.
RayAIM-DH1 is an alignment and aiming attachment for the nRAY. Use it to attach a scope of your choice for even greater precision and easier installation of the Wireless Wire nRAY.
OmniTik 5 PoE ac features five Gigabit Ethernet ports and support for 802.11ac. It’s equipped with a powerful 720MHz CPU 128MB RAM high power 1 300mW 802.11a/n/ac Dual Chain wireless (support for AC as well as backwards compatible with regular 802.11a/n CPE) and comes with a new design weatherproof outdoor enclosure two integrated 7.5dBi 5GHz omni antennas a power supply a PoE injector and a mounting kit. It also supports passive or standard 802.3at/af PoE input/output (12v-57v). Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! It can power 48V devices (like IP camera) if 48V input is used. OmniTik 5 PoE ac (International) supports 5150MHz-5875MHz range.
±48 V DC telecom Open Frame Power supply with 12 V 7 A output for use with Cloud Core Routers since revision "r2" or the new CCR2004-1G-12S+2XS and CRS326-24S+2Q+RM. Simply remove one of the current power supplies and replace with the new PW48V-12V85W for ±48 V installations. Although made specifically for -48V telecom power the supported input range is from 36V to 57V. Note: To use positive terminal must be 36 to 57V higher potential than negative terminal (eg. if negative terminal is -48 V the positive must be -12 to +9 V). Send purchase questions
UP1302C-12UP1302C-12 is a replacement 12V 10.8A power unit for CRS326-24S+2Q+RM and CCR1036 series (only for new r2 revisions with dual power supplies) as well as new CCR2116-12G-4S+.
Outdoor AC/DC power supply units for the MikroTik netPower product line. Built for situations when your outdoor switches need that extra juice.MTP250-53V47-OD can output 53V 250W while the MTP250-26V94-OD works with a 26V 250W output. Both power supplies come in a sturdy IP67 enclosure with extra protection from dust and moisture.The voltage will depend on your setup – take a look at the “DC jack input Voltage” in the Power input specifications of the desired devices. In our example the home access points are designed for 12-30 V power supplies so we are using the MTP250-26V94-OD. If you have a setup demanding higher voltage – like a net of PTZ security cameras you could use the MTP250-53V47-OD instead. Always check the necessary voltage before powering your devices!
Outdoor AC/DC power supply units for the MikroTik netPower product line. Built for situations when your outdoor switches need that extra juice.MTP250-53V47-OD can output 53V 250W while the MTP250-26V94-OD works with a 26V 250W output. Both power supplies come in a sturdy IP67 enclosure with extra protection from dust and moisture.The voltage will depend on your setup – take a look at the “DC jack input Voltage” in the Power input specifications of the desired devices. In our example the home access points are designed for 12-30 V power supplies so we are using the MTP250-26V94-OD. If you have a setup demanding higher voltage – like a net of PTZ security cameras you could use the MTP250-53V47-OD instead. Always check the necessary voltage before powering your devices!
Features Efficiency Over 75% Over-Voltage Protective Installation Short-circuit Protective Installation Protection Type: Auto-Recover Operating Temperature 0C~+40C Specifications Output Voltage 24 V Output Rating 2A Input Voltage AC 100~240V Input Frequency 50~60Hz Operating Temperature 0C~+40C Storage Temperature -20C~+85C
PowerBox Pro The PowerBox Pro is an outdoor five gigabit ethernet port router with PoE output on four ports. Since the device has a waterproof outdoor case you can mount it on a tower or in other outdoor locations. It also supports passive or standard 802.3at/af PoE input/output. Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! It can power 802.3at and af mode B compatible devices if 48-57 input voltage is used. The device has a SFP port for adding optical fiber connectivity. It is affordable small and easy to use but at the same time comes with a very powerful 800MHz CPU capable of all the advanced configurations that RouterOS supports. Ethernet test results RB960PGS-PBQCA9557 (800Mhz) 1G all port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)161.91 966.1401.51 644.5542.3277.7Bridging25 bridge filter rules143.21 739.0145.5596.0146.274.9Routingnone (fast path)161.91 966.1396.31 623.2521.7267.1Routing25 simple queues161.91 966.1217.2889.7216.0110.6Routing25 ip filter rules74.6905.978.0319.576.539.2All tests are done with Xena Networks specialized test equipment (XenaBay) and done according to RFC2544 (Xena2544)Max throughput is determined with 30+ second attempts with 0 1% packet loss tolerance in 64 512 1518 byte packet sizesValues in Italic indicate that max throughput was reached without maxing out CPU but because board interface configuration was maxed outTest results show device maximum performance and are reached using mentioned hardware and software configuration different configurations most likely will result in lower results
MT48-480095-11DG is 48 V 0.95 A power supply. It's part of Mikrotik GPEN concept that provides all the benefits of GPON but utilizes well-proven simple and inexpensive Ethernet solutions.MT48-480095-11DG allows using long Ethernet cable runs and multiple GPER units - please refer to the table in the last page of GPEN concept brochure.
The quickMOUNT extra is a advanced wall mount adapter for large point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT extra gives possibility to turn antenna within 190°. With the quickMOUNT extra is compatible with our long range heavy antennas like 30dBi parabolic dish mANT 30 or 19dBi sector mANT 19s.
The quickMOUNT pro LHG is a advanced wall or pole mount adapter for Mikrotik LHG antennas. The quickMOUNT pro gives possibility to turn antenna within 140° both in horizontal and vertical plane. With the quickMOUNT pro is possible to perfectly set antenna alignment using integrated graduated scale.
The quickMOUNT pro is a advanced wall mount adapter for small point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT pro gives possibility to turn antenna within 140° both in horizontal and vertical plane. With the quickMOUNT pro it is possible to perfectly set antenna alignment using integrated graduated scale. You can use the quickMOUNT pro with any pole mountable device or Mikrotiks small mounting clip with weight less than 1.5 kg.
The quickMOUNT is a basic wall mount adapter for small point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT gives possibility to turn antenna within 190°. With the quickMOUNT it is possible to simultaneously mount two SXTs thus creating a repeater access point or creating large sector coverage.
Recently we’ve seen a demand for additional pole-mounting options for our popular SXTsq devices. You ask – we deliver! The new QM-X adapter enables vertical and horizontal adjustment on the pole.It is lightweight easy to use extremely durable and without any small parts that might break. Pick it up today for the price of a milkshake and enjoy simple positioning of your SXTsq devices like never before!Compatible devices: SXTsq series DISC 5
A new Concentrator Gateway card for LoRa® technology in mini PCIe form – so you can create customize your own 2.4 GHz IoT projects. It enables 2.4 GHz LoRa® connectivity for any MikroTik product that has a mini PCIe slot with connected USB lines. It supports 4 different RX channels and 1 TX channel.
Kit for mounting RB5009 devices in 1U rackmounts. With this kit you can mount up to four RB5009UG+S+IN routers in a single 1U rackmount space! No more server-room-Tetris just pure productivity.
Radome Cover for Mikrotik mANT 30dBi parabolic antennas! It reduces wind load protects reflector surfaces from harsh environment protects the antenna feed from falling objects as well as positively affect the antenna sustainability and operational life. It's made of special material that has low dielectric constant. Wide range of temperature and direct sunlight won't affect it.
Radome Cover for Mikrotik mANT 30dBi parabolic antennas! It reduces wind load protects reflector surfaces from harsh environment protects the antenna feed from falling objects as well as positively affect the antenna sustainability and operational life. It's made of special material that has low dielectric constant. Wide range of temperature and direct sunlight won't affect it.
RouterBoard 1100AHx4 Dude editionThe RouterBoard 1100AHx4 is a 13-port Gigabit router with its own rackmount case for easy integration into an existing network microSD slot for portable storage.1U Rackmount CaseUnit comes with 1U rackmount case 13x Gigabit Ethernet ports RS232 serial port and dual redundant power supplies (with -48v DC telecom power and 802.3at/af support). The RB1100AHx4 Dude edition features several high speed storage connectors (two SATA and two M.2) for using a Dude database proxy cache or any other storage intensive feature. It includes a 60GB M.2 drive already installed.Fast Internet SpeedNew RB1100AHx4 Dude Edition has Annapurna Alpine AL21400 CPU with four Cortex A15 cores clocked at 1.4GHz each for a maximum throughput of up to 7.5Gbps. The device supports IPsec hardware acceleration and is faster at it than any previous RouterBOARD device (up to 2.2Gbps with AES128).PortsThe RouterBoard 1100AHx4 doesn’t have a miniPCI slot but a single microSD slot for the memory card which is now often used in plenty of portable devices such as mobile phones and certain cameras. This makes the transfer and sharing of files more efficient and quick. It is also compatible to some devices that work with power over Ethernet provided that their much-needed power is around 12 to 24 volts which is the same one used for the device itself.The device is an amazing 13-port router that provides gigabit Ethernet with bypass capabilities making this one of the best rack-mounted routers in the market. Some of the ports are part of the switch groups. For added protection you can also encrypt the hardware.
RouterBoard 1100AHx4The RouterBoard 1100AHx4 is a 13-port Gigabit router with its own rackmount case for easy integration into an existing network.1U Rackmount CaseUnit comes with 1U rackmount case The RB1100AHx4 feature two IEC failover power connectors support 802.3at PoE input and also have a DC telecom power connector for -48 V DC powering.Fast Internet SpeedNew RB1100AHx4 has Annapurna Alpine AL21400 CPU with four Cortex A15 cores clocked at 1.4GHz each for a maximum throughput of up to 7.5Gbps.The device supports IPsec hardware acceleration and is faster at it than any previous RouterBOARD device (up to 2.2Gbps with AES128).
RouterBoard 260GS If you’re only running a small home office you’re still going to deal with plenty of devices that have to communicate to one another. When you need to make sure that everything communicates well and you want to have a more centralized system for it you can purchase RouterBoard 260Gs one of the reputable switches in the market today. It is cost effective flexible easy to use and completely reliable. It’s a great choice for any small business owners. Carries the Benefits of Switches Switches are a great addition to any network for a variety of reasons. The RouterBoard 260GS now allows you to manage a lot of devices at one time. Moreover you can drastically improve the way they relate to one another by ensuring traffic is very clean with hardly any noise or interference that may cause one or both of them to malfunction. You can also easily keep track of how the components of your network are being used. Easy Configuration The RouterBoard 260GS is a small compact and handy device that measures 113 mm in length 89 mm in width and 28 mm in height. It’s very portable so you can move it anywhere you prefer. Also it doesn’t tend to occupy a lot of space. There are LEDs in a panel that quickly notify you of the general condition of the devices within the switch. There’s also an SFP port when you need to work with fiber channels. It is compatible to various SFP modules. Great Performance The RouterBoard 260GS comes with 5 Gigabit ports as well as a 96K SRAM and AR8327 Atheros core processor. It also operates with its proprietary switch operating system that allows you to manage the switch obtain more information about the switch restore and reset the configuration create backup and upgrade the firmware.
The RB260GSP is a small SOHO switch which features power output on it’s ethernet ports. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. The RB260GSP has five Gigabit Ethernet ports and one SFP cage switching is done by an Atheros Switch Chip. The device is running an operating system designed specifically for MikroTik Switch products - SwOS.
The RB4011 wall mount kit is made for protecting your device and it’s ethernet ports from unauthorised access. Made from durable steel the mount attaches to a wall and allows the ethernet cables to be plugged in before the router is mounted inside. This means that once the device is secured there is no easy way to unplug cables or move the device.
Mikrotiks RB4011 uses the amazingly powerful quad core Corte A15 chip from Annapurna labs an Amazon Company same as in Mikrotiks carrier grade RB1100AHx4 unit. The CPU supports IPSec hardware acceleration there is 1GB RAM so this device will easily handle any task you have configured RouterOS to perform. All of this power in a compact and professional looking solid metal enclosure in matte black.The Wifi model is a dual band four chain unit with a supported data rate of up to 1733Mbps in 5GHz. For legacy devices the unit also has a dual chain 2 GHz interface. The device has large external antennas for amazing 360 degree coverage.In addition to the ten 1Gbps ethernet ports an SFP+ Port provides optional 10Gbps connectivity through an SFP+ module (not included).
The RB4011 uses the amazingly powerful quad core Cortex A15 chip from Annapurna labs an Amazon company same as in our carrier grade RB1100AHx4 unit. The CPU supports IPsec hardware acceleration there is 1GB of RAM so this device will easily handle any task you have configured RouterOS to perform. All of this power in a compact and professional looking solid metal enclosure in matte black.In addition to the ten 1 Gbps ethernet ports an SFP+ port provides optional 10 Gbps connectivity through an SFP+ module (not included). All of this power in a compact and professional looking solid metal enclosure in matte black. The ethernet model includes two rackmount ears that will securely fasten the unit in standard 1U rack space.
The ultimate heavy-duty home lab router with USB 3.0 1G and 2.5G Ethernet and a 10G SFP+ cage. Also available is the K-79 kit with that you can mount four of these new routers in a single 1U rackmount space! Unprecedented processing power in such a small form factor.The board features 9 wired ports and a full-sized USB 3.0. Seven of the ports are Gigabit Ethernet another one is 2.5 Gigabit Ethernet and the last one is a 10G SFP+ cage. All the ports are connected to a powerful Marvell Amethyst family switch-chip with a 10 Gbps full-duplex line leading to the Marvell Armada Quad-core ARMv8 1.4 GHz CPU. Both CPU and the switch-chip are located on the bottom of the board – so the case acts as a massive heat-sink!RB5009UG+S+IN can be powered in 3 different ways: PoE-in from Ethernet port #1 or DC Jack or 2-pin terminal on the side.Boards come with 1GB of DDR4 RAM and 1GB NAND storage. This combination of ports and components compared to our other products in a similar form factor provides almost double the performance in configurations with heavy CPU loads.With a simple set of mounting accessories you can mount FOUR of these routers in a single 1U rackmount space! No more server-room-Tetris just pure productivity.
Gigabit PoE Injector PoE injectors are generally not difficult to deal with at all. This Gigabit PoE injector simply needs to be connected to your RouterBoard and the Ethernet cable and you’re basically done. There are no technologically advanced tools or even experience needed. Even if you don’t have a thorough background in networking you can already run your electric power to your device in less than 5 minutes thanks to this handy unit. All the Advantages of a PoE One of the foremost reasons why most wireless and networking manufacturers or developers are offering PoE is because it provides a wealth of benefits. Making it to the no.1 spot is the convenience of delivering the much-needed electric power over a single line rather than relying on multiple cables and wires. In the process PoE helps save you a lot of time and even money since there’s no need to spend more on parts and accessories. PoE also reduces labor costs. One it’s not labor intensive and second because the concept is very basic you can install it all by yourself. Moreover you can maximize your electrical power and reduce the risk of power interruption and damage which usually happens when there are plenty of wires or cables to deal with. When you need to protect the cables simply install an ESD surge protector which is a great complement to your Gigabit PoE injector. Fast and Reliable Uninterrupted Connection With the Gigabit PoE injector you can now enjoy faster data speed. This doesn’t in any way hinder in the performance of your Internet or wireless connectivity. Rather it boosts the transmission of data especially large files because you can now run the device even if there’s no immediate AC outlet available. It also has an integrated LED to indicate if the injector has power. Compatibility The Gigabit PoE injector works with DC barrel plugs from Titan Wireless. The barrel size of the connector is about 2.1mm.
PoE Injector Like a lot of wireless networking systems designed by MikroTik its PoE injector is very affordable. The low-cost solution makes it very practical among home and office users. This also allows them to invest in a couple of pieces that cover any wireless device they are most compatible of. Easy to Use The PoE injector doesn’t need any special tool or manpower before it can be used. All you have to do is to make it an intermediary. This means it acts as a bridge between your Ethernet cable and RouterBoard network. This ensures that in less than 5 minutes you can already redirect your electrical power to your cable and save yourself the hassle of dealing with too many wires or cables. The PoE injectors design also lets you get back to your browsing and other PC-related activities in no time. This also eliminates the need of looking for a professional installation specialist. The cable has a far reach as well spanning several feet. Enjoy the Benefits of a PoE The PoE injector lets you enjoy all the benefits that are associated with the technology. PoE or Power over Ethernet is one of the fastest and most reliable ways to deliver power output to your wireless or network devices. You can directly connect to your power source which is normally found outside your unit and let the current flow to your devices without having to invest or install a lot of cables and wires. In the process you’re able to save more money (besides the equipment is cheap as well). The PoE injector is a very safe device to use. It can be paired with a surge protector in order to prevent any sudden increase of voltage power. It also produces small mains voltage which further decreases your risk.
MikroTik RouterOS Level 4 When you buy a RouterBoard device it comes with a license that is already pre-installed. The level depends on the actual component you have purchased. For the protection of the RouterBoard device as well as to secure your warranty you’re not allowed to do anything worse tamper the license. As a user you’ll be provided with a license key you need to input to properly install the operating system. Nevertheless you’re expected to upgrade whenever necessary. If you’re using MikroTik RouterOS Level 4 or want to upgrade to it here are some features you can take advantage of: Half a Month of Full Configuration Support If you’re been upgrading other operating systems and firmware updating the MikroTik RouterOS Level 4 should never be a worry. The guides are also provided to you. However the company ensures that you are not having going to have a hard time at all. Hence using the license for the first time guarantees you with up to 15 days of full customer and technical support via e-mail. Various Routing and Networking Schemes The basic setup of a network includes a PC a router that broadcasts Internet signal and a number of mobile devices. However as more people and establishments prefer to connect themselves into a larger network there is a need to create more complex routing systems. The MikroTik RouterOS Level 4 makes it more convenient by giving you a lot of options. You can make use of different protocols like RIP and BGP as well as tunnels such as EoIP PPTP L2TP and OVPN. You’re also allowed to set up unlimited interfaces for VLAN. Privacy and Security You can now fully secure your WiFi network with MikroTik RouterOS Level 4 since it offers support RADIUS client for device and user authentication P2P firewall and web proxy. You can also accept unlimited KVM guests and limited user manager active sessions to 20. Difference between RouterOS Versions https://wiki.mikrotik.com/wiki/Manual:License Cloud Hosted Router Cloud Hosted Router (CHR) is a RouterOS version meant for running as a virtual machine. It supports x86 64-bit architecture and can be used on most of popular hypervisors such as VMWare Hyper-V VirtualBox KVM and others. CHR has full RouterOS features enabled by default but has a different licensing model than other RouterOS versions. Difference between CHR Versions License P1 - 1Gbps upload speed limit per interface License P10 - 10Gbps upload speed limit per interface License P-Unlimited - Unlimited speed Please write in order comment your Mikrotik Account (login) and license will be transferred to your account.
MikroTik RouterOS Level 5 When you need to make the most out of your networks and devices then you need to make sure that all the software and firmware are properly upgraded. If you are still stuck in RouterOS Level 4 for example and you are allowed to go higher then do so and upgrade to RouterOS Level 5. Doing so allows you to enjoy the following benefits: Strong Config Support All the router OS licenses of MirkoTik have been designed with the end users in mind so for any IT administrator of an enterprise or even a moderately experienced PC user an upgrade is convenient. Nevertheless the brand actually includes 30 days of full configuration support. Your L5 which is also a wireless Internet service provider can be upgraded to version 7. You simply need to e-mail the team for customer or technical support. Multiple Functions The MikroTik RouterOS Level 5 can function as a wireless access point so you can broadcast Internet signals in longer distances or as wireless client and bridge so you can create multiple LAN or OS software setups and networks. The OS also supports various protocols such as OSPF BGP and RIP allowing you to create multiple diverse and more efficient exterior and interior routing schemes. The various network connections are further enhanced by the addition of 500 potential EoIP PPPoE PPTP and L2TP tunnels as well as unlimited OVPN tunnels. The router OS also introduces unlimited VLAN interfaces. Full Security and Control With the MikroTik RouterOS Level 5 you can set up hotspot active users up to 200 and unlimited KVM guests. Active sessions for user management are set to 50. If you want stronger privacy you can activate the web proxy regulate queues and create P2P firewalls. The Level 5 license does not expire. Difference between RouterOS Versions https://wiki.mikrotik.com/wiki/Manual:License Please write in order comment your Mikrotik Account (login) and license will be transferred to your account.
MikroTik RouterOs Level 6 MikroTik has so far come up with 6 license levels of its RouterOS the operating system that is pre-installed in its devices such as routers bridges and access points. One of these is L6. Unlike the other previous licenses which act as wireless Internet service providers L6 is designated as controller and has therefore a much better relationship with the other parts of the network. It also comes with unparalleled features and benefits: Upgrade The L6 can be upgraded to ROS v.8x though you can retain the existing license level for the rest of the device’s life. On the other hand L3 and L4 can be upgraded to L6 (L3 however is currently sold in volume only). Initial Configuration Support MikroTik provides up to 30 days of great configuration support through e-mails. You can count on their expert customer service guiding you as you make the upgrade or introduce the brand-new operating system into the device. Needless to say the operating system has been designed to be very easy to install and manage. Flexibility Devices that are installed with RouterOS L6 can also be used as an access point to help broadcast the Internet signal wirelessly and to different locations bridge to help various LAN networks communication as well as a wireless client. It also supports different kinds of protocols namely RIP BGP and OSPF as well as tunnels such as EoIP PPTP and PPYP. You can also create unlimited VLAN interfaces. Security and Networking RouterOS L6 works without putting any limit to the HotSpot active users. You can also have unlimited queues and run a web proxy to make the network and connection invisible. It is compatible with RADIUS client which is helpful when you want to authenticate logins. These further protect the privacy of online users. Difference between RouterOS Versions https://wiki.mikrotik.com/wiki/Manual:License Please write in order comment your Mikrotik Account (login) and license will be transferred to your account.
A super low loss RPSMA cable for superior connection quality suited for indoor and outdoor use this cable provides superior matching and loss values. The name of this cable comes from combining the words “flexible” and “waveguide” to denote the high end features of this product. The inner conductor is silver plated copper and both connectors are soldered not crimped for the best possible signal quality. Ideally suited for our BaseBox and other products with RPSMA connectors and works with most antennas.
