QuPanel LTE HP MIMO 2x2Directional High Power multiband LTE MIMO 2x2 antennaQuPanel LTE HP directional MIMO 2x2 high gain antenna is predicted for 4G LTE mainly but is compatible with 3G and 2G as well. The antenna improves the signal in rural/suburban and locations where the mobile signal is weak. That antenna is predicted to be installed on the buildings (on the pole or on the wall). Due to very wide working frequency range the antenna is universal client for LTE bands like LTE700/800/1800/1900/2100/2300/2600. It’s compatible with Teltonika: RUT240 RUT900 RUT950 RUT955 RUTX09 RUTX11 and other MIMO 2x2 LTE/3G/2G modems and routers.
Directional High Power multiband LTE SISO antennaQuPanel LTE HP directional high gain antenna is predicted for 4G LTE mainly but is compatible with 3G and 2G as well. The antenna improves the signal in rural/suburban and locations where the mobile signal is weak. That antenna is predicted to be installed on the buildings (on the pole or on the wall). Due to very wide working frequency range the antenna is universal client for LTE bands like LTE700/800/1800/1900/2100/2300/2600. It’s compatible with Teltonika: RUT230 TRB140 TRB141 TRB142 TRB145 TRM240 TRM250 and other SISO LTE/3G/2G modems and routers.
Directional High Power multiband LTE SISO antennaQuPanel LTE HP directional high gain antenna is predicted for 4G LTE mainly but is compatible with 3G and 2G as well. The antenna improves the signal in rural/suburban and locations where the mobile signal is weak. That antenna is predicted to be installed on the buildings (on the pole or on the wall). Due to very wide working frequency range the antenna is universal client for LTE bands like LTE700/800/1800/1900/2100/2300/2600. It’s compatible with Teltonika: RUT230 TRB140 TRB141 TRB142 TRB145 TRM240 TRM250 and other SISO LTE/3G/2G modems and routers.Cable length: 5m
QuPS4Outdoor power socket & plug - 4 PIN set (pin and input/output)Outdoor power socket & plug 4 PIN set (2 pin for power and 2 pin for digital INPUT/OUTPUT) for all cases where the User doesn’t want to use Passive PoE powering feature in all QuWireless antennas or need access to digital INPUT/OUTPUT from outside of the QuRouter or antenna.
High-quality waterproof IP67 RJ45 Ethernet Connector System - guaranteed waterproofing of the connection on the enclosure. That solution is universal for M20 standard hole. It can be used to almost every outdoor enclosure where Ethernet cable is necessary. The RJ45 adapter has shielded and short-body RJ45 connector. It performs also D-cut on the M20 thread to block the adapter against twisting during the installation. Great stuff for PoE supply.
QuRJ45 LongOutdoor IP68 RJ-45 socket adapterWaterproof outdoor RJ-45 socket adapter dedicated to all Teltonika Routers. Standard length is 380mm but there is available also 160mm length version (QuRJ45)
QuRouter 240SOutdoor QuSpot + RUT240 + SIM card access + PSU 24V PoE QuRouter 240S is a cost-effective and powerful outdoor industrial LTE Cat 4 & Wi-Fi router for professional application. Integrated with omnidirectional LTE and Wi-Fi antennas. The mobile router delivers high performance for mission-critical cellular communication in harsh and hazardous environments where a wide operating temperature is required. Equipped with an external SIM holder.
QuRouter 950SOutdoor QuSpot + RUT950 + SIM card access+ PSU 24V PoEQuRouter 950S is a professional industrial LTE Cat 4 & Wi-Fi router for IoT applications. Integrated with omnidirectional LTE and Wi-Fi antennas. This rugged device delivers high performance cellular communication in harsh environments and a wide operating temperature range. The router is equipped with 4G connectivity redundancy through dual SIM failover.
QuRouter X09SOutdoor QuSpot + RUTX09 + SIM card access + PSU 24V PoEQuRouter X09S is a perfect outdoor LTE Cat 6 router with embedded GNSS/GPS module. Equipped with Dual-SIM with 4G connectivity redundancy failover. Integrated with omnidirectional LTE MIMO 2x2 antenna and GPS antenna. This device is perfect for advanced Industrial and Enterprise applications. Quad Core ARM Cortex A7 717 MHz CPU and 256 MBytes DDR3 RAM assures smooth VPN data acquisition.
QuRouter X11SOutdoor QuSpot + RUTX11 + SIM card access + PSU 24V PoEQuRouter X11S is a perfect outdoor LTE Cat 6 router with embedded concurrent dual band AC Wi-Fi Access Point/Hotspot for mobile and fixed installations. Equipped with Dual-SIM Bluetooth LE and GPS/GNSS. RUTX11. Integrated with omnidirectional antennas to all wireless interfaces. This device is perfect for advanced Industrial and Enterprise applications. Quad Core ARM Cortex A7 717 MHz CPU and 256 MBytes DDR3 RAM assures smooth VPN data acquisition.
QuSpot omni LTE antenna for Teltonika RUT240 of 230 router is a perfect outdoor device for mobile and fixed installations like industrial CCTV hotspots yachts boats campers RV etc. It has embedded also omni Wi-Fi antenna. If you use RUT240 or 230 with QuSpot antenna you get an integrated complete solution with embedded router and multi band antennas in one enclosure.SPECIFICATION: LTE SPECIFICATION FREQUENCYSupported LTE bands 1 2 3 4 5 6 7 8 9 10 12 13 14 17 18 19 20 23 25 26 27 28 33 34 35 36 37 38 39 40 41 44 2305-2360 0.694-0.96 GHz 1.7 - 2.2 GH 2.2 - 2.7 GHz GAIN 2 dBi 2 dBi 4 dBi VSWR
QuSpot omni LTE antenna for Teltonika RUT950 and RUT900 router is a perfect outdoor device for mobile and fixed installations like industrial CCTV hotspots yachts boats campers RV etc. It has embedded also omni Wi-Fi antenna. If you use RUT950 or 900 with QuSpot antenna you get an integrated complete solution with embedded router and multi band antennas in one enclosure.SPECIFICATION: LTE SPECIFICATION FREQUENCYSupported LTE bands 1 2 3 4 5 6 7 8 9 10 12 13 14 17 18 19 20 23 25 26 27 28 33 34 35 36 37 38 39 40 41 44 2305-2360 0.694-0.96 GHz 1.7 - 2.2 GH 2.2 - 2.7 GHz GAIN 2 dBi 2 dBi 4 dBi VSWR
A955SQuSpot for Teltonika RUT955Integrated multi-band LTE omni antenna + WiFi omni antenna + GPS antenna + place to install Teltonika RUT955 (All-in-one).QuSpot omni LTE antenna for Teltonika RUT955 router is a perfect outdoor device for mobile and fixed installations like industrial CCTV hotspots yachts boats campers RV etc. It has embedded also omni Wi-Fi and GPS antenna. If you use RUT955 with QuSpot antenna you get an integrated complete solution with embedded router and multi band antennas in one enclosure.
QuSpot omni LTE antenna for Teltonika RUTX09 router is a perfect outdoor device for mobile and fixed installations like industrial CCTV hotspots yachts boats campers RV etc. It has embedded also GPS antenna. If you use RUTX09 with QuSpot antenna you get an integrated complete solution with embedded router and multi band antennas in one enclosure.SPECIFICATION: LTE SPECIFICATION FREQUENCYSupported LTE bands 1 2 3 4 5 6 7 8 9 10 12 13 14 17 18 19 20 23 25 26 27 28 33 34 35 36 37 38 39 40 41 44 2305-2360 0.694-0.96 GHz 1.7 - 2.2 GH 2.2 - 2.7 GHz GAIN 2 dBi 2 dBi 4 dBi VSWR
It is an omnidirectional MIMO 2x2 antenna working in VV-polarization it´s desired for LTE connections. The antenna can be used for the most popular LTE bands (3 7 20) frequencies 698-2700 MHz. On the bottom side the WiSpot has the full IP67 installation compartment where You can easily install a n electronic board with LTE modem to get the ready-to-use IP67 device powered by PoE (802.3af) - RJ45 waterproof high-quality connector. That antenna is predicted to be installed on the buildings as the client antenna as the hotspot or on the moving points like trains buses lorries yachts boats company or standard cars to receive Internet by LTE. If You are looking for the solution which will give You the Internet access everywhere that´s the antenna for You. WiSpot OA MMB0727-4V can be installed on the mast a wall or the flat surface like car roofs.Solid WiBOX for any outdoor conditionsEvery WiBOX systems are predicted to use outdoor they are made of UV resistant ABS plastic material which is also resistant for bad weather conditions like rain snow humidity. Special designed sealing systems guarantees IP67 waterproof level. WiBOX systems can work in any weather conditions temperature range is from -40°C up to 80°C.Wall or pole mountingComprehensiveness of WiBOX system installation WiBOX system can be installed using WiMount mounting system on a pole mast or a wall.Waterproof WiBOX constuctionWiBOX system has certified IP67 waterproof level. It predicts the system to be used in any outdoor applications on the mast or on a wall. WiBOX system is equipped with top quality RJ45 waterproof system or with standard fee-thru unit to install Ethernet cable to the WiBOX keeping the waterproof performances.
Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca
Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca
Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca
Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca
Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca
Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca
Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca
Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca
Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca
Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca
Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca
Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca
Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca
