Alfa AWUS1900 is a new quad antenna 802.11ac Wi-Fi USB receiver boasting router connection speeds of up to 1900 Mbps (1300 Mbps for 5 Ghz + 600 Mbps for 2.4 Gz). It is compatible with Microsoft Windows 7 8/8.1 and Windows 10. This connects to your computers USB port with enclosed USB 3.0 cable and boosts the Wi-Fi performance of that specific PC. This is not a router or repeater. Its four transmit/four receive (4T4R) dual band antenna technology allows utilization of both 2.4 and 5 Ghz radio bands on 802.11ac routers for a combined max connect rate of 1900 mbps. The antennas can be detached and extended or upgraded (extension requires optional coaxial cable extension not included in retail box).
The APOE03G is the Single-Port Gigabit ( 10/100/1000 Base-T) redundant PoE Midspan/Injector that provides DC power for PoE equipped Network Appliance device. It is compatible with devices that support the IEEE 802.3af/at standard PoE power feed using Mode B (Pins 4/5 and 7/8). The APOE03G features terminal block for Power redundancy the power redundancy ensures that vital network capabilities are always available when needed and also makes life easier for any IT Administrator who just doesn't want to have his sleep or his weekend interrupted by an untimely service call caused by a finicky power supply. Function: Transform DC through RJ-45 cable PIN# 4 5 7 8 into remote devices such as Wireless AP IP Phone IP surveillance Camera etc. With the terminal block connector can be connected to the UPS allowing redundancy in the power source. Key Features Input: 1.1 Input Voltage: 5Vdc to 57Vdc Nominal = 48Vdc General Description: 2.1 Operation Temperature: -0 ~ 40 2.2 Storage Temperature: -20 ~ 60 2.3 Operation Humidity: 10% ~ 80% Non-Condensing 2.4 RJ-45 Connector PinOut 2.5 DC Power Plug Diameter: 2.1Ø / 5.5Ø Length: 12 ± 0.5mm 2.6 DC Power Plug Polarity: Inside (+) Outside (-)
The APOE03GR is the Single-Port Gigabit ( 10/100/1000 Base-T) redundant PoE Midspan/Injector with Reset function that provides DC power for PoE equipped Network Appliance device. It is compatible with devices that support the IEEE 802.3af/at standard PoE power feed using Mode B (Pins 4/5 and 7/8). The Reset button feature only work in certain AlfaModels. The APOE03GR features terminal block for Power redundancy the power redundancy ensures that vital network capabilities are always available when needed and also makes life easier for any IT Administrator who just doesn't want to have his sleep or his weekend interrupted by an untimely service call caused by a finicky power supply.** PD-side Reset circuit available upon request ** Function: Transform DC through RJ-45 cable PIN# 4 5 7 8 into remote devices such as Wireless AP IP Phone IP surveillance Camera etc. With the terminal block connector can be connected to the UPS allowing redundancy in the power source. Key FeaturesInput:1.1 Input Voltage: 5Vdc to 57Vdc Nominal = 48VdcGeneral Description:2.1 Operation Temperature: -0 ~ 402.2 Storage Temperature: -20 ~ 602.3 Operation Humidity: 10% ~ 80% Non-Condensing2.4 RJ-45 Connector PinOut2.5 DC Power Plug Diameter: 2.1Ø / 5.5Ø Length: 12 ± 0.5mm2.6 DC Power Plug Polarity: Inside (+) Outside (-)PIN Define RJ-45 Input ( Data ) RJ-45 Output ( Data & Power )PINSymbolSymbol1TXRX A+TXRX A+2TXRX A-TXRX A-3TXRX B+TXRX B+4TXRX C+TXRX C+ DC+5TXRX C-TXRX C- DC+6TXRX B-TXRX B-7TXRX D+TXRX D+ DC-8TXRX D-TXRX D- DC-
The APOE03GS is the Single-Port Gigabit ( 10/100/1000 Base-T) redundant PoE Midspan/Injector with Hi-Power sourge protection that provides DC power for PoE equipped Network Appliance device. It is compatible with devices that support the IEEE 802.3af/at standard PoE power feed using Mode B (Pins 4/5 and 7/8). The APOE03GS fetures surge protection for the data and power feeds for networks. The design utilizes three-pole differential Gas Tubes. The tubes feature ultra-low Line to Line and Line to Ground capacitance to minimize distortion of high-speed signals. The APOE03GS features terminal block for Power redundancy the power redundancy ensures that vital network capabilities are always available when needed and also makes life easier for any IT Administrator who just doesn't want to have his sleep or his weekend interrupted by an untimely service call caused by a finicky power supply. Function: Transform DC through RJ-45 cable PIN# 4 5 7 8 into remote devices such as Wireless AP IP Phone IP surveillance Camera etc. With the terminal block connector can be connected to the UPS allowing redundancy in the power source. Key FeaturesInput:1.1 Input Voltage: 5Vdc to 57Vdc Nominal = 48VdcGeneral Description:2.1 Operation Temperature: -0 ~ 402.2 Storage Temperature: -20 ~ 602.3 Operation Humidity: 10% ~ 80% Non-Condensing2.4 RJ-45 Connector PinOut2.5 DC Power Plug Diameter: 2.1Ø / 5.5Ø Length: 12 ± 0.5mm2.6 DC Power Plug Polarity: Inside (+) Outside (-)PIN Define RJ-45 Input ( Data ) RJ-45 Output ( Data & Power )PINSymbolSymbol1TXRX A+TXRX A+2TXRX A-TXRX A-3TXRX B+TXRX B+4TXRX C+TXRX C+ DC+5TXRX C-TXRX C- DC+6TXRX B-TXRX B-7TXRX D+TXRX D+ DC-8TXRX D-TXRX D- DC-
TSM-B1 is the stainless steel ratchet mount with versatile four-way design that adapts easily to deck or side mounting on slanted or level surface. The quick action handle makes raising and lowering the antenna easy and return the antenna to its correct upright position. With TSM1 you could easy mount with ALFA Tube series device.
With the latest 802.11ax Wi-Fi 6 technology AmpliFi Alien delivers 4x the overall network capacity and 2x the coverage while reaching true gigabit speeds.It features a dual-band radio with 2.4 GHz and 5 GHz 802.11ax radios optimized for Wi-Fi 6 performance and backwards compatibility with previous Wi-Fi standards.AmpliFi Alien can be used as a stand-alone router or you can add an unlimited number of AmpliFi Alien Routers for use as MeshPoints to expand range coverage.Features: Wi-Fi 6 performance 5 GHz 8x8 Wi-Fi 6 radio (Max speed 4804 Mbps) 2.4 GHz 4x4 Wi-Fi 6 radio (Max speed 1148 Mbps) 4-Port Gigabit Ethernet switch Touchscreen display
The AFI-ALN is a combination pack that comprises one AmpliFi Alien Router and one Amplifi Alien MeshPoint. The MeshPoint expands wireless range coverage and includes a Gigabit Ethernet port to extend wired connectivity.Dual-Band Wi–Fi 6 Router. Polished PerformanceElegantly designed AmpliFi Alien brings revolutionary Wi-Fi 6 benefits to your home. Increase your network capacity by 4x and boost coverage by 2x while reducing battery drain in mobile devices. AmpliFi Alien comes with 2.4/5 GHz Wi-Fi 6 radios. They deliver 5952 Mbps total capacity and 12 spatial streams from a single AmpliFi Alien unit. Easily mesh multiple units over the air to build virtually unlimited Wi-Fi capacity in your home.Intuitive TouchscreenThe vibrant touchscreen displays network status and provides instant controls. For your convenience set the display and the green LED ring automatically turns off.Flexible InterfacesAmpliFi Alien is a powerful and secure router with a single Gigabit internet interface and internal power supply. Each Alien router has an integrated LAN switch with 4 Gigabit Ethernet ports. Bring Gigabit Ethernet into any room without pulling wires. Use Wi-Fi 6 for wireless connectivity and the LAN ports for local wired connectivity.PerformanceAmpliFi Alien is optimized to provide your home network with the highest possible performance regardless of how many client devices are connected simultaneously. Utilizing MU-MIMO and OFDMA for communication across twelve Wi-Fi 6 spatial streams Alien eliminates dead spots and increases total home network capacity by four times.AmpliFi App. Simple Setup Rich ControlsSet up your AmpliFi network in a minute with the included AmpliFi app. User-friendly yet feature-rich controls and statistics let you configure the AmpliFi Alien for your environment.Scalable Mesh Wi-Fi TechnologySimple and powerful Wi-FI 6 standard Mesh system that easily covers any home providing simultaneous 4K/8K UHD streaming and online gaming to multiple clients from any room.
Ethernet Surge Protector 8p in a rack housing operating in AT / AF standard.The device allows the addition of PoE power in the UTP and FTP twisted pair and at the same time provides effective protection of devices working in the Ethernet network against harmful electrostatic discharges and overvoltages. It provides device protection - with a connection rate up to 1 Gb / s inclusive - compatible with the PoE AT / AF standard allowing you to select the A / B power supply method / options . Protects each cable in a four-pair cable by discharging any load to the ground. It signals the selected power method with LEDs. It is an effective and cost-effective solution before the destruction or damage of protected devices. Ethernet Surge Protector collects inductive loads in the network and safely leads them to ground which effectively prevents damage caused by overvoltages. The aesthetic powder-coated aluminum housing in white is ideally suited to the design of devices from the Cloud Core Router series by MikroTik. Rack holders give the possibility of mounting a compartment's stain. Expandable with additional Ethernet modules Surge Protector SPG-8P. Protection of 24 ports at maximum expansion. Key features:Number of LAN ports - 8 x 10/100 / 1000MbpsNumber of PoE ports - 8 x 10/100 / 1000Mbps Supply voltage - 12-54VDCMaximum voltage PoE - 54Vpower supply via twisted pair - (4.5 +) ( 7.8- )Maximum current drawn from one port - 1ACurrent at which the port is closed -1.4Protected pairs - 1-2 3-6 4-5 7-8Slot type - RJ-45 shieldedDimensions - 485mm x 110mm x 45mm Length of the earthing cable - 30cmWeight - 0.725kg
Ethernet Surge Protector SP-8P-D is a device that effectively protects Ethernet network aganist surges arising as a results of inducing charges of high voltage. Charges generated durinSurge g atmospheric discharges demage the Ethernet ports on network devices. They can also cause damage to the ientire system often rather expensive. The guarantee imposed by the manufacturer does not cover this type of demage and must be repaired at the cost of the owner. Ethernet Surge Protector collects the loads induced in the network and safely transfers it to the ground which effectively prevents demage resulting to the surges. Ethernet Surge Protectors prevent quite a lot of devastating damages to valuable computer systems and other networking equipment every year. Lighting surge protector will ensure peace of mind as you know that your devices are safe even in the midst of thunder-storms.
Thanks to Rust-proof aluminium construction from 2mm thick PA11 aluminium sheet metal. Max. pole diameter: 50mmAdjustment: vertical 50° horizontal 20°.Price for 1 piece of mouting. * - MikroTik RBLHGG-60ad kit and pole are shown for demonstration purposes only and sold separately!
Anti-noise shield for Ubiquiti airMAX Sector 16/120 base station antennas. Substantially reduces interference from nearby devices. Shield reduces noise level helping improve signal strenght of base station set. AirMAX antenna and Rocket M5 are mounted inside aluminium cage which additionally protects whole set against tough environmental conditions. CNC technology used in manufacturing process shield is made with needed precision from grey coated aluminium. * - Sector AM-5G16-120 Rocket M5 and pole are shown for demonstration purposes only and sold separately!
Anti-noise shield for Ubiquiti airMAX Sector 17/90 base station antennas. Substantially reduces interference from nearby devices. Shield reduces noise level helping improve signal strenght of base station set. AirMAX antenna and Rocket M5 are mounted inside aluminium cage which additionally protects whole set against tough environmental conditions. CNC technology used in manufacturing process shield is made with needed precision from grey coated aluminium. * - Sector AM-5G17-90 Rocket M5 and pole are shown for demonstration purposes only and sold separately!
Anti-noise shield for Ubiquiti airMAX Sector 20/90 and 16/90 base station antennas. Substantially reduces interference from nearby devices. Shield reduces noise level helping improve signal strenght of base station set. AirMAX antenna and Rocket M5 are mounted inside aluminium cage which additionally protects whole set against tough environmental conditions. CNC technology used in manufacturing process shield is made with needed precision from grey coated aluminium. * - Sector AM-5G20-90 Rocket M5 and pole are shown for demonstration purposes only and sold separately!
Cover reduces the noise which improves the performance of the mounted device. The whole is made of aluminum and powder painted in light gray. CNC technology used in manufacturing process shield is made with needed precision from grey coated aluminium. * - Ubiquiti LBE-5AC-16-120 and pole are shown for demonstration purposes only and sold separately!
Omnitik cover / shield for creating 120 degree sector from RouterBOARD OmniTIK 5 ac (RBOmniTikG-5HacD) and RouterBOARD OmniTIK 5 PoE ac (RBOmniTikPG-5HacD). The main purpose of the cover is to change the characteristics of the antenna from omnidirectional to sector with 120 ° beamwidth. Thanks to that cover substantially eliminates interference from other devices installed behind and at the sides of wireless set. Shield is compatible with RouterBOARD OmniTIK 5 ac (RBOmniTikG-5HacD) and RouterBOARD OmniTIK 5 PoE ac (RBOmniTikPG-5HacD).* - Mikrotik OmniTIK and pole are shown for demonstration purposes only and sold separately!
Anti-noise shield for RouterBoard OmniTik U-5HnD and RouterBoard OmniTik UPA-5HnD substantially reduces interference generated by nearby electronic devices. It lowers noise levels improving signal quality. Shield is made from aluminium coated with light grey paint. Designed and manufactured using state-of-the-art CNC machines it is beautifully made with needed precision. * - Mikrotik Omnitik is shown for demonstration purposes only and sold separately!
Anti-noise shield for RouterBOARD QRT-5 & QRT-2 substantially reduces interference generated by nearby electronic devices. It lowers noise levels improving signal quality. Shield is made from aluminium coated with light grey paint. Designed and manufactured using state-of-the-art CNC machines it is beautifully made with needed precision. * - Mikrotik QRT and pole are shown for demonstration purposes only and sold separately!
Anti-noise shield for RouterBOARD SXT LTE and RouterBOARD SXT LTE kit substantially reduces interference generated by nearby electronic devices.It lowers noise levels improving signal quality.Shield is made from aluminium coated with light grey paint that perfectly blends in with SXT.Designed and manufactured using state-of-the-art CNC machines it is beautifully made with needed precision.* - Mikrotik SXT-LTE and pole are shown for demonstration purposes only and sold separately!
Anti-Noise shield for RouterBOARD SXTsq Lite5 substantially reduces interference generated by nearby electronic devices. It lowers noise levels improving signal quality. Shield is made from aluminium coated with light grey paint. Designed and manufactured using state-of-the-art CNC machines it is beautifully made with needed precision. * - Mikrotik SXT and pole are shown for demonstration purposes only and sold separately!
Anti-noise shield for MikroTik RouterBOARD wAP. Substantially reduces interference from nearby devices. CNC technology used in manufacturing process shield is made with needes precision. Shield is made entirely from grey coated aluminium. * - Mikrotik WAP and pole are shown for demonstration purposes only and sold separately!
Anti-noise shield for Ubiquiti NanoStation 5AC antennas. Substantially reduces interference from nearby devices. CNC technology used in manufacturing process shield is made with needes precision. Shield is made entirely from grey coated aluminium.* - Nanostation 5ac and pole are shown for demonstration purposes only and sold separately!
Anti-noise shield for Ubiquiti NanoStation Loco M2 and NanoStation Loco M5 antennas. Substantially reduces interference from nearby devices. CNC technology used in manufacturing process shield is made with needes precision. Shield is made entirely from grey coated aluminium. * - Nanostation Loco M plastic bracket and pole are shown for demonstration purposes only and sold separately!
Anti-noise shield for Ubiquiti NanoStation M2 and NanoStation M5 antennas. Substantially reduces interference from nearby devices. CNC technology used in manufacturing process shield is made with needes precision. Shield is made entirely from grey coated aluminium. * - Nanostation M and pole are shown for demonstration purposes only and sold separately!
Anti-noise shield PBE-300 is designed to seamlessly integrate with Ubiquiti PowerBeam M5-300 22dBi antenna. Substantially reduces interference from nearby networks and network devices. Shield reduces noise level helping to improve signal strength of wireless set. CNC technology used in manufacturing process shield is made with needed precision from grey coated aluminium.Compatible with: Ubiquiti PowerBeam M5-300 22dBi Ubiquiti PowerBeam 5AC-300 22dBi * - PBE-M5-300 and pole are shown for demonstration purposes only and sold separately!
High-Performance Imaging The Dahua IPC-HFW5541T-ASE S3 series camera is equipped with a 5-MP 1/2.7" CMOS image sensor delivering superior low luminance performance and high-definition images. It outputs a maximum resolution of 5 MP (2960×1668) at 25/30fps ensuring clear and detailed video capture even in challenging lighting conditions. This makes the camera an ideal solution for environments that require high-quality surveillance where every detail matters for accurate monitoring and security. Equipped with a built-in IR LED the Dahua IPC-HFW5541T-ASE S3 offers superior night vision capabilities with a maximum illumination distance of up to 80 meters. This ensures effective surveillance in low-light or complete darkness providing reliable security around the clock. The camera also features flexible encoding options including ROI SVC SMART H.264+/H.265+ and AI H.264/H.265. These encoding technologies optimize bandwidth and storage efficiency allowing the camera to adapt to various network conditions without compromising video quality.
