RocketDish 5G30 Improve network relationships such as those located in various locations through the RocketDish 5G30. Easy Installation The RocketDish 5G30 has been designed for certain base stations such as AirMax and Rocket M. Thus the installation process is very simple and fast. In fact there’s no need to use any special tools for attachment. All you need to do is to snap the dish along with the mount and you’re good to go. It’s very secure with very little movement. This is important since you also want to achieve stability when it comes to signal strength and transmission. 2x2 MIMO Technology The dish has a carrier-class antenna that supports 2x2 MIMO technology for a stronger and more reliable Internet throughput. This also allows the RocketDish 5G30 to work as an effective point-to-point bridge connecting two LAN networks that are not necessarily found in the same location. Long Range The RocketDish 5G30 has a very long range of more or less 50 kilometers making it an ideal solution for networks that are found in clustered buildings remote offices and even a neighborhood. The Internet speed is pegged at around 150 mbps which is sufficient for various network and online applications such as the sharing of data e-mailing browsing and chatting. The antenna makes use of a dual-linear polarity with a high cross-polarization isolation of at least 35dB. The potential gain from the dish is high as well between 28 and 30.25 dBi. It has an H-pol and V-pol beam width of 5 degrees and a front or back ratio of -34dB. High Frequency The RocketDish 5G30 also encourages a more stable Internet throughput with very minimal interference because of its high frequency range which is from 4.9 to 5.90GHz. The high frequency means you don’t have to go through the 2.4GHz which is often noisy since a lot of devices are using it.
Breakthrough Design and Performance The powerful RocketDish™ ac Antennas feature carrier-class construction and 2x2 dual-polarity performance. Powerful Beam Directivity The RocketDish™ ac Antennas feature high isolation and improved F/B ratio for better Signal-to-Noise Ratio (SNR) which allows the use of higher-order modulation and the maximum data rate. Reduced Interference Higher Gain The improved F/B ratio and lower sidelobes significantly reduce interference so the innovative RocketDish™ ac Antennas provide superior gain and beam performance for high-capacity multipoint networks. Industrial-Strength Construction RocketDish™ ac Antennas are designed with robust mechanical design for outdoor application use. Weatherproof Design Ruggedized yet lightweight components resist corrosion and are designed to withstand harsh outdoor conditions. The included radome and metal shroud help protect against nature’s elements.
Fully Integrated RadioLaunched in 2008 the Bullet™ design helped transform the WISP industry. Its unique design upgrades link performance and reduces deployment complexity.Carrier-Class ThroughputThe Bullet™AC delivers up to 300+ Mbps real TCP/IP throughput.* Please note that manufacturer's instructions for the installation configuration and use of the equipment must be strictly observed.
Now with airOS®8 and airView® airOS®8 provides powerful features including airMAX ac protocol support real-time RF analytics and an all-new design for enhanced usability. High-Gain Directional AntennaThe LiteBeam AC provides 23 dBi of gain for long-distance connectivity and uses a directional antenna pattern for improved noise immunity.Breakthrough Industrial DesignFeaturing the freedom of three-axis alignment the LiteBeamM fully assembles in seconds – no tools needed. Only a single wrench is required for pole-mounting.Compact in Size Light in WeightA lightweight form factor contained within ultra-compact packaging the LiteBeam AC is ideal for shipping and logistics.* Please note that manufacturer's instructions for the installation configuration and use of the equipment must be strictly observed.
Improved Noise Immunity The NanoBeam directs RF energy in a tighter beamwidth. With the focus in one direction the NanoBeam blocks or spatially filters out noise so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. Innovative Mechanical Design • Built-in mechanical tilt The mounting bracket conveniently offers 20° of uptilt and up to 20° of downtilt. • Quick assembly The number of fasteners was reduced to simplify assembly. Tools are required only when the technician mounts the NanoBeam on the pole. • Easy removal The antenna feed can be detached with the push of a button. Corrosion Resistance • Fasteners GEOMET®-coated for improved corrosion resistance when compared with zinc-plated fasteners. * Please note that manufacturer's instructions for the installation configuration and use of the equipment must be strictly observed.
NanoBeam AC Gen2 (NBE‑5AC‑Gen2)High-Performance airMAX® ac BridgeIncorporating innovative industrial design with proprietary airMAX® ac technology the NanoBeam® AC is ideal for CPE deployments requiring maximum performance from the smallest possible footprint. Management Wi-Fi Radio The NanoBeam® AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. Improved Surge Protection The NanoBeam® AC features enhanced protection against ESD events. Improved Noise Immunity The Ubiquiti NanoBeam directs RF energy in a tighter beamwidth. With the focus in one direction the NanoBeam blocks or spatially filters out noise so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. Superior Processing Ubiquiti's airMAX® engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler to support the high data rates and dense modulation used in airMAX ac technology. Advanced Software TechnologyUbiquiti’s airMAX® technology is proven in millions of deployments worldwide exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability high throughput and low latency in unlicensed multipoint networks. Now with airOS®8airOS®8 provides powerful features including airMAX® ac protocol support real-time RF analytics and an all-new design for enhanced usability. Plug and Play InstallationThe NanoBeam® AC mounts to a variety of surfaces including poles or walls and offers the freedom of three-axis alignment. No screws are required for pole-mounting and only a single wall screw (not included) is required for wall-mounting. * Please note that manufacturer's instructions for the installation configuration and use of the equipment must be strictly observed.
Improved Noise Immunity The NanoBeam directs RF energy in a tighter beamwidth. With the focus in one direction the NanoBeam blocks or spatially filters out noise so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. Innovative Mechanical Design • Built-in mechanical tilt The mounting bracket conveniently offers 20° of uptilt and up to 20° of downtilt. • Quick assembly The number of fasteners was reduced to simplify assembly. Tools are required only when the technician mounts the NanoBeam on the pole. • Easy removal The antenna feed can be detached with the push of a button. Corrosion Resistance • Fasteners GEOMET®-coated for improved corrosion resistance when compared with zinc-plated fasteners. * Please note that manufacturer's instructions for the installation configuration and use of the equipment must be strictly observed.
Ubiquiti Networks set the bar for the world's first low-cost and efficient broadband Customer Premises Equipment (CPE) with the NanoStation® M. The NanoStation AC and NanoStation AC loco take the same concept to the future with sleek form factors along with integrated airMAX (MIMO TDMA protocol) technology and dedicated Wi-Fi management. The radio and antenna are combined to create a more efficient and compact CPE. The NanoStation AC and NanoStation AC loco get maximum gain out of the smallest footprint. The low cost high performance and small form factor of the NanoStation AC and NanoStation AC loco make them extremely versatile and economical to deploy. Sleek Industrial Design The NanoStation AC and NanoStation AC loco represent the next evolution of the iconic CPE design that revolutionized the Wireless ISP industry. Ethernet Connectivity Passive PoE (Pairs 4 5+; 7 8 Return)Management Wi-Fi Radio Each NanoStation AC loco model integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.Improved Surge Protection The NanoStation AC and NanoStation AC loco feature enhanced protection against ESD events. Now with airOS®8 airOS®8 provides powerful features including airMAX® ac protocol support real-time RF analytics and an all-new design for enhanced usability. * Please note that manufacturer's instructions for the installation configuration and use of the equipment must be strictly observed.
Ubiquiti Networks set the bar for the world's first low-cost and efficient broadband Customer Premises Equipment (CPE) with the NanoStation® M. The NanoStation AC and NanoStation AC loco take the same concept to the future with sleek form factors along with integrated airMAX (MIMO TDMA protocol) technology and dedicated Wi-Fi management. The radio and antenna are combined to create a more efficient and compact CPE. The NanoStation AC and NanoStation AC loco get maximum gain out of the smallest footprint. The low cost high performance and small form factor of the NanoStation AC and NanoStation AC loco make them extremely versatile and economical to deploy. Sleek Industrial Design The NanoStation AC and NanoStation AC loco represent the next evolution of the iconic CPE design that revolutionized the Wireless ISP industry. Ethernet Connectivity Passive PoE (Pairs 4 5+; 7 8 Return)Management Wi-Fi Radio Each NanoStation AC loco model integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.Improved Surge Protection The NanoStation AC and NanoStation AC loco feature enhanced protection against ESD events. Now with airOS®8 airOS®8 provides powerful features including airMAX® ac protocol support real-time RF analytics and an all-new design for enhanced usability. * Please note that manufacturer's instructions for the installation configuration and use of the equipment must be strictly observed.
NanoStation Loco M2Invest on a low-cost but high-performing CPE today. Get a NanoStation Loco M2.Price You Can AffordThe NanoStation Loco M2 is positioned as a low-cost CPE. Since it doesn’t break the bank it allows you to enjoy high cost savings without feeling the pinch on quality since it remains superior when it comes to throughput performance. This also makes small businesses campuses and neighborhoods among others to build a reliable network at a cost they can easily manage.2x2 MIMO TechnologyThe NanoStation Loco M2 has a good range thanks to its 2x2 MIMO technology with gain of up to 8dBI. It is also an outdoor device giving it more freedom to pick up clearer and stronger signal. As an added great feature the external antenna has dual polarity and offers support to devices that are running on 802.11 g/n protocol. Compared to standard CPE this one is definitely faster. It taps on the 2.4GHz frequency and broadcasts up to 150 mbps.The device is also equipped with Atheros MIPS 24KC with 400MHz speed 8mB Flash and 32MB SDRAM.CompactThe device possesses a small form factor which makes it very sleek and good looking aesthetically. Mounting the device is also more convenient as it doesn’t ask for a lot of space in order to work.Power over EthernetThe NanoStation Loco M2 has been designed for certain remote functions. For example administrators or network developers may be able to reset the circuitry without having to really go outside. It can also be transformed into a reliable power over Ethernet CPE by simply purchasing that adapter that makes this 802.3af compliant.Intuitive SoftwareThe CPE can be customized modified and controlled via the AirOS software which can be comfortably installed and used even by those who don’t have a lot of experience with CPEs and related software. The interface is intuitive and easy to navigate. Compact CPE Design Powerful airOS® FeaturesUbiquiti’s versatile airOS® firmware technology enables high-performance outdoor multi-point networking. airOS provides features such as wireless settings bridge or routing configuration and system management services. Advanced Software Technology Ubiquiti’s airMAX® technology is proven in millions of deployments worldwide exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability high throughput and low latency in unlicensed multipoint networks.* Please note that manufacturer's instructions for the installation configuration and use of the equipment must be strictly observed.
NanoStation M2 Increase throughput maximize your connectivity and improve relationships of various networks with the NanoStation M2 from Ubiquiti Network. It’s an affordable but reliable and compact wireless CPE bridge you can install immediately. By purchasing the product you are able to take advantage of the following: Fast and Easy Installation Process When you’re dealing with technologies such as hardware setting them up is almost always an arduous process taking a lot of time and energy. The NanoStation M2 however is very user friendly and can be installed in less than 30 minutes. The bundle already comes with the universal pole as well as the mounting straps so you can properly secure the device in place. The software AirOS already includes all the tools you need for convenient setup and control. Robust Compact Design The NanoStation M2 is lightweight and easy to remove and reinstall. Nevertheless despite its size it’s very durable and is designed to withstand different environmental conditions with hardly interfering with the distribution or amplification of the Internet signal across devices and networks. 2x2 MIMO Technology The NanoStation M2 uses the 2x2 MIMO Technology which means it doesn’t just allow you to share your connection seamlessly to different users but it also boosts your throughput to twofold. It also scores quite well in cross-polarity isolation at 11dBi for 2.4GHz and a whopping 16 dBi for 5GHz. The ideal score is around 20 dBi. The technology also allows you to choose a channel with the least interference or the best strength. The NanoStation M2 has a long range of around 15 kilometers. Integration of IP Video Camera If you’re planning to use an IP video camera you can do so with NanoStation M2. You just have to make use of 802.3af adapter to make the setup 802.3af 48V producing enough power to make the camera work. Compact CPE Design The NanoStation®M features the CPE design that expanded the global Wireless ISP industry. Versatile Application Use The NanoStation®M can be deployed for Point-to-Point (PtP) bridging wireless connectivity to a video surveillance system or use as an airMAX® CPE. Dual Ethernet Connectivity With software-enabled PoE output the secondary Ethernet port can power an external device such as a PoE security camera for seamless IP video integration. Powerful airOS® Features Ubiquiti’s versatile airOS® firmware technology enables high-performance outdoor multi-point networking. airOS provides features such as wireless settings bridge or routing configuration and system management services. Advanced Software Technology Ubiquiti’s airMAX® technology is proven in millions of deployments worldwide exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability high throughput and low latency in unlicensed multipoint networks. * Please note that manufacturer's instructions for the installation configuration and use of the equipment must be strictly observed.
NanoStation Loco M5Do you have to spend thousands of dollars just to have a very efficient and reliable wireless network? The answer is no. NanoStation Loco M5 is a great proof for that. A cost-effective solution it performs just as well as its more expensive counterparts. Plus it has a very elegant form factor that can stand up against rain snow and heat. It’s truly a device that doesn’t immediately wear out a perfect option for a long-term wireless network investment.High-performingThe NanoStation Loco M5 is known for its much smaller size than the other NanoStation which makes it ideal for residential or small building use. It has a good throughput of around 150 mbps sufficient to cover multitudes of devices and users simultaneously. It has a great reach at 13dBi through its integrated antenna. It operates at a frequency of GHz which is ideal if you want to maximize throughput. This signal is seldom interrupted by noise or clutter as most devices and appliances work on 2.4GHz frequency.AirMaxThe unit also makes use of the AirMax technology and its TDMA protocol. It lets you compartmentalize time schedules so you’ll be able to enjoy a smoother transmission and receipt of wireless connection. Moreover you are also able to reduce latency even if there are already a lot of devices that are connected into the network. It works very well along with quality of service so you can prioritize the allocation of the available bandwidth.NanoStation Loco M5 can be controlled via the software AirOS and AirController. It’s a web-based management interface.PoEThe NanoStation Loco M5 is also compatible with a PoE (power over Ethernet setup) so you can deal with fewer wires. Moreover you can now reset its power directly from the main source than on the equipment itself saving you the hassle.Compact CPE DesignThe NanoStation®M features the CPE design that expanded the global Wireless ISP industry. Powerful airOS® Features Ubiquiti’s versatile airOS® firmware technology enables high-performance outdoor multi-point networking. airOS provides features such as wireless settings bridge or routing configuration and system management services. Advanced Software Technology Ubiquiti’s airMAX® technology is proven in millions of deployments worldwide exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability high throughput and low latency in unlicensed multipoint networks. * Please note that manufacturer's instructions for the installation configuration and use of the equipment must be strictly observed.
NanoStation M5 The NanoStation M5 proves that efficiency can still be equated to affordability. Even if it’s low cost its performance is luxurious. It has a maximum transmission speed of about 300 mbps allowing it to serve multiple devices at one time. It follows the TDMA (Time Division Multiple Access) protocol which permits users to effectively schedule time slots in order to maximize the transmission and lower the latency period. It works at a frequency of 5.5GHz a channel that is not prone to noise and interference. The integrated antenna connects via the 2x2 MIMO technology with a reach of 16dBi so it’s ideal for complexes or buildings made up of different floors. Paired with QoS you can easily prioritize bandwidth allocation. It runs on an Atheros 24KC MIPS chipset with a clock speed of 400 MHz. It has a 32MB RAM and 8MB NAND Flash. PoE Connection The NanoStation M5 is equipped with the “intelligent PoE.” This means you can reset it through its power supply not directly in the unit. This is accomplished via the dual Ethernet port one of which is dedicated for PoE use. In the process you’re able to make the most of your electric power and save yourself the hassle of dealing a lot of wires. You can also add an IP camera which permits you to keep track of your property among others through a web-based access. Various Connectivity Options The NanoStation M5 can be used as an access point connecting to hundreds of devices all at the same time or as a client which can be connected to other networks through a bridge. The level of flexibility makes this a fantastic and convenient addition to your networking system. Quick Monitoring Process The NanoStation M5 is easy to monitor through its strength indicators following the integration of 2 pairs of LEDs. Compact CPE Design The NanoStation®M features the CPE design that expanded the global Wireless ISP industry. Versatile Application Use The NanoStation®M can be deployed for Point-to-Point (PtP) bridging wireless connectivity to a video surveillance system or use as an airMAX® CPE. Dual Ethernet Connectivity With software-enabled PoE output the secondary Ethernet port can power an external device such as a PoE security camera for seamless IP video integration. Powerful airOS® Features Ubiquiti’s versatile airOS® firmware technology enables high-performance outdoor multi-point networking. airOS provides features such as wireless settings bridge or routing configuration and system management services. Advanced Software Technology Ubiquiti’s airMAX® technology is proven in millions of deployments worldwide exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability high throughput and low latency in unlicensed multipoint networks. * Please note that manufacturer's instructions for the installation configuration and use of the equipment must be strictly observed.
Using airMAX ac technology the PBE-5AC-500 supports up to 450+ Mbps real TCP/IP throughput. It launches with PtP functionality and a client mode feature will be added with a future firmware upgrade. * Please note that manufacturer's instructions for the installation configuration and use of the equipment must be strictly observed.
Using airMAX ac technology the PBE-5AC-620 supports up to 450+ Mbps real TCP/IP throughput. It launches with PtP functionality and a client mode feature will be added with a future firmware upgrade. * Please note that manufacturer's instructions for the installation configuration and use of the equipment must be strictly observed.
Performance Breakthrough airMAX® ac products offer improved latency noise immunity scalability and significantly increased throughput performance. Innovative Mechanical DesignThe integrated isolator design improves RF isolation to spatially filter out interference and the metal-plated interior of the rear housing enhances RF shielding.Superior RF IsolationCompare the two near-field plots and note the superior performance of the integrated RF isolator. Both near-field plots are displayed in watts and use a linear scale.Superior ProcessingUbiquiti's airMAX® engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler to support the high data rates and dense modulation used in airMAX ac technology.Advanced Software TechnologyUbiquiti’s airMAX® technology is proven in millions of deployments worldwide exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability high throughput and low latency in unlicensed multipoint networks.* Please note that manufacturer's instructions for the installation configuration and use of the equipment must be strictly observed.
Improved Noise Immunity The PowerBeam directs RF energy in a tighter beamwidth. With the focus in one direction the PowerBeam blocks or spatially filters out noise so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. Innovative Mechanical Design • Built-in mechanical tilt The mounting bracket conveniently offers 20° of uptilt and up to 20° of downtilt. • Quick assembly The number of fasteners was reduced to simplify assembly. Tools are required only when the technician mounts the PowerBeam on the pole. • Easy removal The antenna feed can be detached with the push of a button. Corrosion Resistance • Fasteners GEOMET®-coated for improved corrosion resistance when compared with zinc-plated fasteners. • Dish and brackets Made of galvanized steel that is powder‑coated for superior corrosion resistance. Redesigned pole bracket for the 400 mm dish prevent paint from being removed from the metal brackets for improved corrosion resistance. * Please note that manufacturer's instructions for the installation configuration and use of the equipment must be strictly observed.
Improved Noise Immunity The PowerBeam directs RF energy in a tighter beamwidth. With the focus in one direction the PowerBeam blocks or spatially filters out noise so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. Innovative Mechanical Design • Built-in mechanical tilt The mounting bracket conveniently offers 20° of uptilt and up to 20° of downtilt. • Quick assembly The number of fasteners was reduced to simplify assembly. Tools are required only when the technician mounts the PowerBeam on the pole. • Easy removal The antenna feed can be detached with the push of a button. Corrosion Resistance • Fasteners GEOMET®-coated for improved corrosion resistance when compared with zinc-plated fasteners. • Dish and brackets Made of galvanized steel that is powder‑coated for superior corrosion resistance. Redesigned pole bracket for the 400 mm dish and fender washers for the 300 mm dish prevent paint from being removed from the metal brackets for improved corrosion resistance. * Please note that manufacturer's instructions for the installation configuration and use of the equipment must be strictly observed.
Interchangeable Isolation™ Antennas for PrismStation™ With a range of different beam widths the isolation antennas are interchangeable and feature high-performance beam patterns ideal for a range of deployment needs. Used with the PrismStation 5AC and IsoStation radios these antennas deliver superb co‐location performance without sacrificing gain. Modular Design The isolation antennas are interchangeable and feature high-performance beam patterns for a range of demanding deployment needs. Combined with the PrismStation 5AC or IsoStation radio the system gets maximum gain out of the smallest footprint. Symmetrical horn antenna 30° version offer breakthrough scalability options for wireless systems. Unique beam performance and great co‐location characteristics allow for a higher density of sectors than traditional sector technology. Features: Compatible Radios IsoStation/PrismStationHPOL Beamwidth 30°VPOL Beamwidth 30°Elevation Beamwidth 30°Electrical Downtilt 0°Cross-Pol Isolation 17 dBMax. VSWR 2:1Wind Loading (with PrismStation) 56 N @ 200 km/h (12.59 lbf @ 125 mph)Wind Survivability 200 km/h(125 mph)
Interchangeable Isolation™ Antennas for PrismStation™ With a range of different beam widths the isolation antennas are interchangeable and feature high-performance beam patterns ideal for a range of deployment needs. Used with the PrismStation AC and IsoStation radios these antennas deliver superb co‐location performance without sacrificing gain. Modular Design The isolation antennas are interchangeable and feature high-performance beam patterns for a range of demanding deployment needs. Combined with the PrismStation AC or IsoStation radio the system gets maximum gain out of the smallest footprint. Symmetrical horn antenna 45° version offer breakthrough scalability options for wireless systems. Unique beam performance and great co‐location characteristics allow for a higher density of sectors than traditional sector technology. Features: Compatible Radios IsoStation/PrismStationHPOL Beamwidth 45°VPOL Beamwidth 45°Elevation Beamwidth 45°Electrical Downtilt 0°Cross-Pol Isolation 17 dBMax. VSWR 1.7:1Wind Loading (with PrismStation) 56 N @ 200 km/h (12.59 lbf @ 125 mph)Wind Survivability 200 km/h(125 mph)
Interchangeable Isolation™ Antennas for PrismStation™ With a range of different beam widths the isolation antennas are interchangeable and feature high-performance beam patterns ideal for a range of deployment needs. Used with the PrismStation AC and IsoStation radios these antennas deliver superb co‐location performance without sacrificing gain. Modular Design The isolation antennas are interchangeable and feature high-performance beam patterns for a range of demanding deployment needs. Combined with the PrismStation AC or IsoStation radio the system gets maximum gain out of the smallest footprint. Asymmetrical horn antennas 60° version have naturally attenuated side lobes and extremely low back radiation. They offer the best front-to-back ratio in the industry and the lowest side lobe radiation. Asymmetrical horn antennas are ideal for cluster sector installations with high co-location requirements. Features: Compatible Radios IsoStation/PrismStationHPOL Beamwidth 60°VPOL Beamwidth 60°Elevation Beamwidth 30°Electrical Downtilt 0°Cross-Pol Isolation 17 dBMax. VSWR 2:1Wind Loading (with PrismStation) 56 N @ 200 km/h (12.59 lbf @ 125 mph)Wind Survivability 200 km/h(125 mph)
Performance Breakthrough airMAX® ac products offer improved latency noise immunity scalability and significantly increased throughput performance. Superior Processing Ubiquiti's airMAX® engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler to support the high data rates and dense modulation used in airMAX ac technology. Plug and Play Integration The innovative airMAX® ac antennas feature significant advances in beam and energy isolation performance for increased capacity of airMAX networks. * Please note that manufacturer's instructions for the installation configuration and use of the equipment must be strictly observed.
Full-Band 5 and 2.4 GHz Coverage The Rocket®5ac Prism covers the full 5 GHz radio band and incorporates both airMAX ac and airPrism technologies for maximum performance of wireless links in high-density areas.Revolutionary Filtering TechnologyUbiquiti’s patented airPrism technology provides breakthrough radio selectivity in unlicensed wireless band performance. airPrism technology isolates signals within the operating channel to increase capacity and throughput in co-location deployments.Designed for High PerformanceThe Rocket5ac Prism features EMI-shielded metal housing GPS airPrism circuitry and the airView® real-time spectrum analyzer to deliver maximum spectral efficiency/throughput. Now with airOS®8 airOS®8 provides powerful features including airMAX® ac protocol support real-time RF analytics and an all-new design for enhanced usability.* Please note that manufacturer's instructions for the installation configuration and use of the equipment must be strictly observed.
Ubiquiti Networks introduces an innovative sector antenna for your Point‑to‑MultiPoint (PtMP) applications the airPrism® 5 GHz 3x30° HD Sector Antenna AP-5AC-90-HD.The airPrism antenna features significant advances in noise isolation and beam performance to complement the Rocket®5ac Prism™ radios (not included) for co‑location deployments. 3 x 30° Beamwidth Coverage The three Rocket5ac Prism™ radios are installed at the top middle and bottom of the airPrism antenna. Each radio independently transmits and receives within its corresponding 30° beamwidth. Powerful Performance Highly resistant to noise interference the airPrism antenna provides superior beam performance in high-density areas for high-capacity multipoint networks. Breakthrough Design Mounted on a single airPrism antenna three Rocket5ac Prism radios maximize throughput in an efficient tower footprint minimizing installation and tower costs.
Versatile 4 MP (1440p) indoor/outdoor bullet camera with 24 FPS video for day or night surveillance with infrared LEDs.The UniFi Video Camera G4 Bullet delivers clear 4MP 24 fps video over Gigabit Ethernet. The ball joint mount design allows indoor or outdoor installation and offers flexible 3-axis adjustment. The camera has infrared LEDs with an automatic IR cut filter for day and night surveillance. It features a built-in microphone and supports 802.3af PoE for power.
Mount your CloudKey G2 or CloudKey G2 Plus into a 19" rack with the Cloud Key G2 Rack Mount Accessory. The Cloud Key G2 and Cloud Key G2 Plus lock securely into the back of the Rack Mount Accessory for a clean and secure installation. The Cloud Key front panel display RJ45 ethernet connector reset button and status LED are exposed on the front panel for easy access.- Works with CloudKey G2 and Cloud Key G2 Plus- Front-panel ethernet port for clean installation- Includes four cage nuts and M6 bolts
