DS-1280ZJ-DM21Junction Box for Dome Camera DS-2CD27x2 seriesFeatures: Aluminum alloy material with surface spray treatment Side inlet and bottom inlet The bottom waterproof cover and the side gland nut are interchangeable Waterproof design General Material: Aluminum Alloy Color: Hik white Dimension: Φ137 mm × 42 mm
DS-1280ZJ-DM21Junction Box for Dome Camera DS-2CD27x2 seriesFeatures: Aluminum alloy material with surface spray treatment Side inlet and bottom inlet The bottom waterproof cover and the side gland nut are interchangeable Waterproof design General Material: Aluminum Alloy Color: Hik white Dimension: Φ137 mm × 42 mm
DS-1280ZJ-DM8Junction Box for Dome Cameras DS-2CD23xx seriesFeatures: Aluminum alloy material with surface spray treatment Side inlet and bottom inlet Interchangeable bottom waterproof cover and side gland nut Waterproof design General Material: Aluminum Alloy Color: Hik white Dimension: Φ 126.7 mm × 35 mm
DS-1280ZJ-SJunction Box for Dome Cameras DS-2CD2Txx DS-2CD26x2 seriesFeatures: Aluminum alloy material with surface spray treatment Waterproof design Cable hole on bracket makes the feature better General Material: Aluminum Alloy Color: Hik white Dimension: Φ137 x 53.4x 164.8mm
DS-1275ZJVertical Pole Mount Bracket for DS-2CD21xx DS-2CD23xx DS-2CD2Txx DS-2CD26x2 DS-2CD25xx DS-2CD27x2 series camerasFeatures: For pole mounting The clasp is made of stainless steel Mounting board is made of aluminum die-casting alloy General Material: Aluminum Alloy Color: Hik white Dimension: 127×46×250mm
DS-3E0106HP-EHikvision 4-ports 100Mbps long-range unmanaged PoE+ switch. DS-3E0106HP-E switches are layer 2 100 Mbps long-range PoE switches providing 1 × 10/100 Mbps Hi-PoE port 3 × 10/100 Mbps PoE ports and 2 × 10/100 Mbps RJ45 ports. The switches provide advanced Hi-PoE/PoE technology and support extend mode with long-range access up to 250 m. The prior and stable transmission of the important surveillance area videos can also be guaranteed when connected to the high priority ports. Meanwhile the 2 × 10/100 Mbps RJ45 uplink ports guarantee applications of multiple network solutions. Up to 250m transmission achievable at reduced mbps rate IEEE 802.3at/af/bt standard for Hi-PoE port (Max. 60 W port power IEEE 802.3at/af standard for PoE ports IEEE 802.3 IEEE 802.3u and IEEE 802.3x standard 1 × 10/100 Mbps Hi-PoE port 3 × 10/100 Mbps PoE ports and 2 × 10/100 Mbps RJ45 ports Provides up to 30 watts per PoE port PoE power budget 60W 6 kV surge protection for PoE ports Plug-and-play installation 1.2 Gbps switching fabric 768 Kbits RAM Data Buffer 2K MAC address entries Sturdy metal enclosure Dimensions: 145 x 25.6 x 68.45mm
DS-3E0310HP-E8-Port 100 Mbps Long-Range PoE SwitchDS-3E0310HP-E switches are layer 2 100 Mbps long-range PoE switches providing 1 × 10/100 Mbps HiPoE port 7 × 10/100 Mbps PoE ports and 2 × 10/100/1000 Mbps RJ45 ports. The switches provide advanced HiPoE/PoE technology and supports extend mode with long-range access up to 250 m. Meanwhile the 2 × 10/100/1000 Mbps RJ45 uplink ports guarantee applications of multiple network solutions.Feature and Function: 1 × 10/100 Mbps HiPoE port 7 × 10/100 Mbps PoE ports and 2 × 10/100/1000 Mbps RJ45 ports. IEEE 802.3at/af/bt standard for HiPoE port (Max. 60 W port power). IEEE 802.3at/af for PoE ports. IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab and IEEE 802.3z. PoE port with 6 KV surge protection. AF/AT camera can reach up to 250 m in extend mode. HiPoE camera can reach up to 150 m. PoE output power management. Dual uplink network design. Wire-speed forwarding and non-blocking design. Store-and-forward switching. Solid high-strength metal shell. Fan-free design with high reliability
Features: Support Wifi convenient setting up and no wiring required Support web configuration Nice industry design IP65 2 indicator integrated Internal Mifare card reader 1-ch Indoor station access control Noise suppression and echo cancellation 2MP HD Camera with IR supplement Standard PoE/ 12 VDC
Introducing the new and improved Imilab Security Camera EC4. It is the successor of the popular EC2 model. The new model has 4 Mpx 2.5K resolution recording also supports color night mode and also allows connecting a photovoltaic panel.Say goodbye to constant charging and hello to battery-saving technology with the Imilab Security Camera EC4. This innovative home-security camera can fully charge through the built-in 5200mAh rechargeable battery or through the optional solar panel (purchased separately). A single charge could last months with the battery—or you may never need to recharge at all with the solar panel!2.5K Video and Many ImprovementsThe new Imilab Security Camera EC4 camera includes several improvements that should eliminate the problems of older cameras such as delayed recording and poor video at night. The camera is 4 Mpx has an F1.6 aperture and records at 2.5K resolution. The Imilab Security Camera EC4 features a more modern design slightly larger battery capacity improved microphone and speaker and LED lighting.Say goodbye to grainy blurry black and white video footage and hello to color with the EC4. The bright built-in spotlight turns on any time a person is detected at night displaying full-color footage.Flexible and Secure StorageThe IMILAB cloud storage is based in the AWS cloud service which is extremely reliable and has coverage in 190 countries. All IMILAB video data is securely encrypted with randomly generated encryption keys and each encryption is applied to the data transition of the cloud storage. Only legitimate users can access the data via digital certificate accordingly. With the automatic data backup on IMILAB cloud storage users can access video recordings any time anywhere.IP66 WeatherproofThe Imilab Security Camera EC4 is waterproof and will function perfectly rain or shine. The operating temperature is -4° to 122° Fahrenheit (-20° to 50° C).
Introducing the new and improved Imilab Security Camera EC4. It is the successor of the popular EC2 model. The new model has 4 Mpx 2.5K resolution recording also supports color night mode and also allows connecting a photovoltaic panel.Say goodbye to constant charging and hello to battery-saving technology with the Imilab Security Camera EC4. This innovative home-security camera can fully charge through the built-in 5200mAh rechargeable battery or through the optional solar panel (purchased separately). A single charge could last months with the battery—or you may never need to recharge at all with the solar panel!2.5K Video and Many ImprovementsThe new Imilab Security Camera EC4 camera includes several improvements that should eliminate the problems of older cameras such as delayed recording and poor video at night. The camera is 4 Mpx has an F1.6 aperture and records at 2.5K resolution. The Imilab Security Camera EC4 features a more modern design slightly larger battery capacity improved microphone and speaker and LED lighting.Say goodbye to grainy blurry black and white video footage and hello to color with the EC4. The bright built-in spotlight turns on any time a person is detected at night displaying full-color footage.Flexible and Secure StorageThe IMILAB cloud storage is based in the AWS cloud service which is extremely reliable and has coverage in 190 countries. All IMILAB video data is securely encrypted with randomly generated encryption keys and each encryption is applied to the data transition of the cloud storage. Only legitimate users can access the data via digital certificate accordingly. With the automatic data backup on IMILAB cloud storage users can access video recordings any time anywhere.IP66 WeatherproofThe Imilab Security Camera EC4 is waterproof and will function perfectly rain or shine. The operating temperature is -4° to 122° Fahrenheit (-20° to 50° C).The package also includes a gateway to which the camera connects via Wi-Fi 2.4 GHz. The gateway connects to your home network using an Ethernet cable with a router and then the camera connects to the gateway. Then you can connect more cameras to the gate maximum 5.
The Imilab Solar Panel keeps your battery charged with direct sunlight. Its weather-resistant design easy installation anywhere. With the solar panel option just expose to a minimum of 4 hours of adequate sunlight per day and you may never have to recharge again. The 3.5W high-efficiency solar panel means you don’t need to waste time constantly changing your camera’s batteries.
Antenna set P-60 5G 7003800 MIMO is used for the reception of mobile operators' signals in MIMO technology (two antennas mounted into X polarity).The antenna set covers ultra wide frequency range from LTE 700 to LTE 5G 3 8 GHz frequency bands.Set is the most suitable for connecting it to Wi-Fi router or MIMO modem.One set contain two antennas (one for upper and one for lower mounting position) with the same technical data.
Antenna set P-60 5G 7003800 MIMO is used for the reception of mobile operators' signals in MIMO technology (two antennas mounted into X polarity).The antenna set covers ultra wide frequency range from LTE 700 to LTE 5G 3 8 GHz frequency bands.Set is the most suitable for connecting it to Wi-Fi router or MIMO modem.One set contain two antennas (one for upper and one for lower mounting position) with the same technical data.
Technical parameters:Outer size 203 x 203 x 65 mmInner size 186 x 186 x 53 mmMaterial UV steady plastic ABS PolyamideInstalation for mast ø 19 - 54 mm. Specification:GentleBOX is an outdoor box for AP RouterBOARDs and other electronics with a unique system of the grooves and holes for easy installationEasy installation without drilling you require only 1 flat and 2 cross-shaped (PH1 and PH2) screwdrivers and the spanner "10" for complete installationThe package includes cable gland secured against spinning by specially molded retaining linesGentleBOX is prearranged for easy mounting of RB411 Package contents:Screws and plastic distance piers for easy installation of the electronics (4/4pcs)Easy to use self-holding plastic piersNon-losable bayonet locks MS-1 for easy closure (4pcs) - it is recommended to lubricate them with vaseline or siliconeSpecial bracket for the mast ø 19 - 54 mm (1pcs)Cable gland Pg11 for cable ø 4 - 10 mm (1pcs)Cable gland M20 for cable ø 4 - 10 mm you can put the connector RJ45 through (1pcs)
JE-250 S2T - lock by non-lose screws two cable glands instalation by bracketTechnical parametersInner size 246 x 185 x 61/50 mmMaterial Aluminum alloy with high corrosion protectionWeight 1.5 kg Specification:GentleBOX JE-250 Alu is an ideal metal outdoor box for installation of electronicsMetal body assures rezistance against interferences hight rezistance against lightning and waterBox included ventilation plug for the best water protectionssembling screws and plastic self-hold distance tubes (8/8 pcs)Easy to instal on mast or wall - variableThe package includes cable gland which is secured against spinning by specially molded retaining linesHinge with end stop for cable glands protectionUBNT Rocket instalation by GentleCLIPReady for easy instalation Mikrotik RouterBoards RB 411 RB911 RB912 RB433 RB493 others by sheet (not including the package)
Specification: usable for all GentleBOXesgood fixation of a cableexcellent climate resistancemounting hole ø 20 mmblue coloureasy to use eternet cable with connector RJ45Material polyamid 6 - high lifetimeSeal material neopren - high lifetimeCable diameter ø 5 - 10 mmIP code IP68
Antenna JRMD – 900 – 10/11 is designed for microwave links at the frequency band 10 and 11 GHz. The new generation is coming in a deep reflector dish design with a massive holder.
Antenna JRMC-680-10/11 is designed for microwave links at the frequency band 10 and 11 GHz. Precise performance with deep reflector dish complies with standard ETSI class 3.
Specification: usable for all GentleBOXesgood fixation of a cableexcellent climate resistancemounting hole ø 19 mmblue colourMaterial polyamid 6 - high lifetimeSeal material neopren - high lifetimeCable diameter ø 5 - 10 mmIP code IP68
Pair of SFP BiDi Transceivers 1.25G 20km The pair of SFP BiDi Transceivers 1.25G 20Km makes use of a single but high-performing fiber. Fiber optics for many years has been regarded as tone of the best materials to use for data transmission as it offers a host of benefits. One it’s more durable than other types of cables such as coaxial. Because it’s less vulnerable to breakage suffering from data loss or transmission is very small. It is a material that is capable for very fast transmission which is what you need when you want to enjoy the full benefit of wireless technologies such as video and voice. It also works with other kinds of cables like Cat 5 which is usually the one that’s often connected to your devices at home. Moreover you experience less interference with fiber because it can carry a higher signal. High Data Rates The pair of SFP BiDi Transceivers 1.25G 20Km has a very high data rate of around 1.25Gbps which is more than sufficient for a variety of Internet and networking activities. With it you can power up several devices at one time distribute or share wireless connection to a couple of networks transfer very large data files and use the Internet for VoIP or streaming to name a few. Long Transmission The pair of SFP BiDi Transceivers 1.25G 20Km covers a very long distance of up to 20 kilometers. This means that even if the distance is already far the quality of the connection obtained or transmitted remains almost the same. Other Information It is compliant to SFP MSA as well as RoHS which means it’s generally safe to use. It also follows the other safety standards such as IEC 60825-1 and IEC 60825-2. You can also rely on it for both long and short haul link process. It comes with a lone 3.3V power supply.
A pair of industrial temperature grade (-40°C to +85°C) modules for 80km links includes one S-45LC80D and one S-54LC80D. SFP module S-45LC80D: 1.25G SM 80km T1490nm/R1550nm LC-connector DDM. SFP module S-54LC80D: 1.25G SM 80km T1550nm/R1490nm LC-connector DDM. Compatible with all MikroTik products that have SFP or SFP+ cages.
SFP Transceiver 1.25G 850nm 550m The SFP Transceiver 1.25G 850nm 550m works on a dual fiber which is basically fiber optics that is composed of two strands that are different from each other but they have the same wavelength. They can be joined or be made into a multi-mode fiber or one strand in order to increase the throughput and make the performance even more efficient. It also becomes bidirectional (BIDI) so it’s able work on either direction. A multi-mode fiber works on two wavelengths: 1550nm and 1310 nm. Regardless fiber optics is always considered to be a better investment than other types of cables since it’s more reliable and flexible. Works with Different Devices The SFP Transceiver 1.25G 850nm 550m has been designed to fit a number of SFP cages perfectly. In other words this transceiver can be easily added into any existing network allowing it to take full advantage of the speed agility and performance of fiber optics. It also comes with a Duplex LC connector which is designed by Lucent Technologies (hence the name). It then looks like an RJ45 connector but it’s basically a duplex connector that is both connected via clip. You can use this to attach the transceiver into the cage. Other Features The SFP Transceiver 1.25G 850nm 550m has a low dissipation of power at less than 700mW. It also provides 1.25Gb/s of data links (dual) and comes with a 850nm FP transmitter of laser. The SFP Transceiver 1.25G 850nm 550m moreover is equipped with a metal enclosure that is able to bring the EMI down and a lone power supply that generates 3.3V. It has an operating temperature between 0 degrees Celsius and 70 degrees Celsius. Long Range The SFP Transceiver 1.25G 850nm works up to 550m which means within this distance the transmission of data remains stable or sustainable.S-85DLC05D is a 1.25G SFP transceiver with a 850nm Dual LC connector for up to 550 meter Multi Mode fiber connection with DDM Units are tested and compatible with RB260GS RB2011LS RB2011LS-IN RB2011UAS-IN RB2011UAS-RM RB2011UAS-2HnD RB2011UAS-2HnD-IN and CCR1036-12G-4S. Units are compatible with non-MikroTik SFP devices as well.
Compatible with Mikrotik Cloud Core Routers Cloud Router Switches RB2011 Series RB260GS Series and also compatible with most Gigabit SFP ports available on various networking devices.
S-31DLC20D is a 1.25G SFP transceiver with a 1310nm Dual LC connector for up to 20 kilometer Single Mode fiber connections with DDM Units are tested and compatible with RB260GS RB2011LS RB2011LS-IN RB2011UAS-IN RB2011UAS-RM RB2011UAS-2HnD RB2011UAS-2HnD-IN and CCR1036-12G-4S. Units are compatible with non-MikroTik SFP devices as well
Industrial temperature grade (-40°C to +85°C) SFP 1.25G module with Dual LC connector for long distance 80km links. Compatible with all MikroTik products that have SFP or SFP+ cages.
