Industrial temperature grade (-40°C to +85°C) SFP 1.25G module with Dual LC connector for long distance 80km links. Compatible with all MikroTik products that have SFP or SFP+ cages.
This unique module opens up a whole world of high speed connectivity possibilities offering up to 10 Gbps speeds over regular familiar twisted-pair cables in your existing products that have SFP+ ports. Any MikroTik device that has SFP+ ports can now be used without installing any optical fiber just plug the S+RJ10 and your network can be upgraded to 10 Gbps making it ready for the next generation of RJ45 hardware.
RBFTC11 is Fiber to Copper converter. Unlike many other media converters available on market RBFTC11 has outdoor waterproof case with lock screw. Unit has 12-57V PoE with 802.3af/at support. Comes with PoE injector and power supply.
5m SFP+ 10Gbps Active Optics direct attach cable. This is highly cost-effective way to connect two SFP/SFP+ devices for very short distances within racks and across adjacent racks. It works with all our products with SFP/SFP+ ports including new RB4011 series (RB4011 series are not compatible with our passive direct attach cables S+DA0001 and S+DA0003)
Direct attach cable that supports not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard!Mikrotik is releasing new direct attach cables that support not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way to connect two SFP/SFP+/SFP28 devices (for example two units of new CCR2004-1G-12S+2XS) for very short distances within racks and across adjacent racks. They provide a low cost low power and low latency interconnect solution for 25-Gigabit Ethernet Fiber Channel and other industry standards and are direct attached compliant and fully conform to the SFP+ MSA specifications.Two versions are available- XS+DA0001 (1m) and XS+DA0003 (3m)
Direct attach cable that supports not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard!Mikrotik is releasing new direct attach cables that support not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way to connect two SFP/SFP+/SFP28 devices (for example two units of new CCR2004-1G-12S+2XS) for very short distances within racks and across adjacent racks. They provide a low cost low power and low latency interconnect solution for 25-Gigabit Ethernet Fiber Channel and other industry standards and are direct attached compliant and fully conform to the SFP+ MSA specifications.Two versions are available- XS+DA0001 (1m) and XS+DA0003 (3m)
2.4Ghz 5dBi Dipole antennas with RPSMA connectors. Take BaseBox2 and simply attach two of those antennas on connectors of BaseBox2 to have 2x2 MIMO 2.4Ghz AP! By this you can have "2.4Ghz OmniTik" ideal for Outdoor Campus areas for example campings or trailer parks. Antennas are waterproof so you can use BaseBox without top cover if both antennas are properly attached.
Kit contains two SFP+ modules that can be used as a pair to achieve operating data rate up to 25 Gbps for distances up to 15km on a single optical cable. SFP/ SFP+/ SFP28
This unit is a direct upgrade of Mikrotik previous 10G SFP+ 10 km module: more functionality for the same price. Mikrotik has added 25G SFP28 support – so you can use one module in all your setups. Perfect for the CCR2004-1G-12S+2XS connectivity router and any other multiport devices.
This device lets you use any 48V PoE source (including Passive PoE Telecom PoE 802.3af and 802.3at) to power RouterBOARD devices. Simply plug any* 48V PoE powered ethernet cable into one port and any 8-30V capable RouterBOARD device into the other. This device is capable to provide high power output - up to 24W (up to 1A at 24V). You can power it with virtually any 42-57V PoE solutions available on market today (Passive Telecom 802.3af and 802.3at PoE plus supported) The device is a rugged metallic design with high capacity components and integrated heatsink design. The case also has mounting holes so you can attach it to a wall. Ethernet shield pins are inside the Ethernet connectors so that shielded ethernet can be used to ground either at the converter itself or at the devices at both ends.
The active GPS antenna is the perfect companion for the LtAP mini giving you the possibility to get accurate geographical coordinates of your router even when it is mounted indoors. The long cable allows to bring the antenna outside and mount it with the included magnet or double sided tape.The ACGPSA is a standalone active GPS antenna specifically made for the 1575.4 MHz frequency used by GPS. The size of the antenna is 46.5 mm x 26.5 mm x 12.5 mm and is waterproof with IP67 rating. It has a long 5 m cable with an SMA connector to be connected to LtAP mini via the ACSMAUFL pigtail (available for ordering separately).
Wi-Fi has to be fast reliable easy to manage it must reach every room and every corner. That is exactly what Audience devices can deliver in grand style – even in the biggest houses!Audience is a tri-band (one 2.4 GHz & two 5 GHz) home access point with meshing technology. If you need Wi-Fi in a huge building with all kinds of obstacles simply add more Audience devices to your network – with a press of a button they will sync seamlessly and create a single Wi-Fi network to cover the whole premises. The initial setup is also very simple – download the iOS or Android MikroTik app it will connect to the router and guide you through a quick setup process.In some cases a single Audience unit might be able to replace several other routers – in our tests it covered 1858 m² (20000 square feet) easily. It depends on the amount of obstacles Wi-Fi clients and interference so results may vary.Dual-chain 2.4 GHz and 5 GHz wireless coverage will solve most interference issues in a crowded environment. For example you can simultaneously use the 2.4 GHz channel for all your household mobile devices and reserve the 5 GHz channel for your PC or TV.Order your Audience today and start living in the future. The future of easy and elegant networking. Wireless specifications 2.4 GHz Transmit (dBm) Receive Sensitivity 1MBit/s 26 -100 11MBit/s 26 -94 6MBit/s 29 -96 54MBit/s 26 -80 MCS0 29 -96 MCS7 25 -75 5 GHz Transmit (dBm) Receive Sensitivity 6MBit/s 28 -95 54MBit/s 25 -78 MCS0 28 -95 MCS7 24 -75 MCS9 22 -70 5 GHz Transmit (dBm) Receive Sensitivity 6MBit/s 32 -96 54MBit/s 28 -80 MCS0 32 -96 MCS7 27 -77 MCS9 25 -72
The device comes bundled with two enclosures so you can choose the design you like best.The cAP ac is a very capable and powerful wireless access point that looks beautiful on both walls and ceilings. The concurrent dual band wireless radio supports dual chain 2 GHz and 5 GHz in 802.11ac and legacy standards and will provide coverage in 360 degrees around it. Even though the radio supports repeater mode the two Ethernet ports give you the ability to extend your network with cables even if PoE power is required since the cAP ac supports 802.3af/at PoE input on the first port and passive PoE output (up to 57V) on the second port. The cAP ac is a feature packed device with a sleek enclosure that can become inconspicuous with the push of a button - the customizable mode button in the device center will turn off all lights and sounds at it’s default configuration but can be reconfigured to launch any RouterOS script.The cAP ac is equipped with two Ethernet ports allowing you to connect another device to further extend your network. What’s more the second Ethernet port supports passive PoE output (up to 57 V) so it can power a wide variety of RouterBOARDs and other devices like IP cameras. In the following scenario you can use a central hEX PoE device to power all your cAP ac units and then have cAP lite units connected to provide even better coverage. The hEX PoE can even be used as a CAPsMAN server so you can easily manage all your access points and control all their settings in a single device. We sell cAP ac (International) 2412-2484MHz and 5150MHz-5875MHz range
The cAP lite is a tiny access point device with a clean and simple design which will blend into any environment. Perfect for public locations and hospitality businesses like hotels airports shopping malls etc. where you can easily place it out of sight or customise it’s looks to make it even less conspicuous. Included with the product are two different casings which can easily be swapped out or if you really like to fit the design with the environment we are providing 3D printer friendly design files. The customisation possibilities are endless. The cAP lite supports 802.11b/g/n and can be powered by power over ethernet. It’s a perfect companion for the MikroTik CAPsMAN (controlled AP system manager) allowing you to control all your AP devices from one central location. The cAP lite can also be used as a stand alone access point with the full potential of RouterOS.
The ceiling AP on steroids! Mikrotik bestseller cAP is back – juiced up and stronger than ever. Compared to the previous cAP models the improved high-gain antenna increases the covered area by up to 100%!Need a nice-looking access point that won’t get in your way? Or perhaps you’re managing the network in a crowded place and don’t want everyone to have physical access to the device? Either way – ceiling is the answer! The device itself is pretty sleek - the low profile attracts less attention than a smoke detector. Your clients guests or colleagues won’t even notice it. But they will definitely notice the blazing fast wireless connection all across the premises.The new design features a larger high-gain antenna higher sensitivity and a built-in reflector. These improvements allow increasing the covered area by up to 100% compared to the previous cAP models!The dual-band dual-chain 2.4 and 5 GHz wireless radio provides a strong coverage in 360 degrees around it so you don’t have to worry about the placement of the device so much. Putting it on the ceiling eliminates many signal absorption problems such as the signal being blocked by large TV sets metal cubicle walls in open space offices etc.Even though the radio supports repeater mode the two Gigabit Ethernet ports give you the ability to extend your network with cables even if PoE power is required: the cAP XL ac supports 802.3af/at PoE input on the first port and passive PoE output (up to 57V) on the second port.
This powerful and affordable router crushes all previous CCR models in single-core performance.Like the other models in CCR2004 series this CCR also features the Annapurna Labs Alpine v2 CPU with 4x 64-bit ARMv8-A Cortex-A57 cores running at 1 7GHz. But here’s the difference. This powerful router crushes all previous CCR models in single-core performance and that is the most important aspect when it comes to heavy operations based on per-connection processing. Like queues for example.The new router has 18 wired ports including 16x Gigabit Ethernet ports and two 10G SFP+ cages. It also has a full-size USB and RJ-45 console port on the front panel.Like all CCR devices it comes in a classic white 1U rackmount case. Built-in dual redundant power supplies are included so you have one less thing to worry about. And of course there is active cooling to keep things nice and cool.Each group of 8 Gigabit Ethernet ports is connected to a separate Marvell Amethyst family switch-chip. Each switch chip has a 10 Gbps full-duplex line connected to the CPU. The same goes for each SFP+ cage - a separate 10 Gbps full-duplex line. Boards come with 4GB of DDR4 RAM and 128MB of NAND storage.
CCR2004-1G-12S+2XSThe Connectivity Router - your best companion when it comes to SFP SFP+ and SFP28 management! 1 10 and 25 Gbps ports in a single device to make your life easier.The “Improvise. Adapt. Overcome.” mindset can be very helpful but sometimes you simply need a device that works and solves the problem without additional tinkering. The CCR2004-1G-12S+2XS does just that – forget about all connectivity troubles and expand your setup in any way you please. This handy router features 12 x 10G SFP+ and 2 x 25G SFP28 ports.CCR2004-1G-12S+2XS is Mikrotik router with the most powerful single-core performance so far. It provides incredible results in single tunnel (up to 3.4 Gbps) and BGP feed processing.Be prepared for anything: 10G 40G and now 25G! Paired with such MikroTik multiport products as CRS317-1G-16S+RM CRS312-4C+8XG-RM and CRS326-24S+2Q+RM your networking setup will know no bounds. Performance-wise CCR2004-1G-12S+2XS is on par with the renowned CCR1009/CCR1016 routers. And with dual redundant power supply you can forget about unexpected downtime! With its elaborate port configuration the new CCR2004-1G-12S+2XS is the perfect addition to any professional networking arsenal – it will save you tons of time in some tricky situations!
Mikrotik wanted to see the full potential of the good old reliable 10G networking combined with a modern CPU. CCR2116-12G-4S+ allows you to forget about CPU limitations in your setup. Like its younger brother – the amazing CCR2004 this router features the mighty Amazon Annapurna Labs Alpine CPU.But with 16 cores running at 2 GHz this CCR eats the other one for breakfast. For example Mikrotik see at least a 15% increase in single-core performance. And that is the most important aspect when it comes to heavy operations based on per-connection processing. Like queues for example. CCR2116-12G-4S+ sets a new standard of single-core performance in the whole CCR product family!Obviously you need the right connectivity to harness this power. There are four 10G SFP+ ports. They have a separate full-duplex line connected to the Marvell Amethyst family switch chip. Then we have Gigabit Ethernet ports. 12 of them are running through the Marvel chip. And there is another Gigabit port connected directly to the CPU for management purposes.Each group of 4 ports has a separate full-duplex connection to the switch chip. No bottlenecks here. You can expect switch-like throughput in most setups.The new generation of processors offers mind-blowing performance. If you look at the CCR1036 — the powerhouse with a 36 core CPU the new CCR2116 can easily double the performance. 16 cores vs 36 cores. Double the performance. There is also an M.2 PCIe slot. It supports SSD`s up to 8 terabytes. This could be extremely useful for all kinds of Container apps.If you are a rather large ISP dealing with dynamic routing massive BGPs complex firewall rules and intricate quality of service configurations.This is the right device for you. Combination of raw power and utility with the reliable 10G networking. And yes like with any ISP-level device Mikrotik have included a dual-redundant power supply. So you have one less thing to worry about.
CRS106-1C-5S The Cloud Router Switch 106-1C-5S is a desktop size smart switch equipped with one Gigabit Ethernet / SFP combo port and five 1.25Gbps SFP cages. The package includes a power supply. Powered by a 400MHz CPU and 128MB RAM it runs RouterOS with a L5 license and supports 11- 30V power. Low price of this product provides a market leading solution for connecting up to six SFP devices. Switching resultsCRS106-1C-5S ModeConfiguration64 byte512 byte1518 bytekppsMbpskppsMbpskppsMbpsSwitchingNon blocking Layer 2 throughput10 416.75 333.31 644.76 736.8568.96 909.0SwitchingNon blocking Layer 2 capacity10 416.710 666.71 644.713 473.7568.913 817.9SwitchingNon blocking Layer 1 throughput10 416.77 000.01 644.77 000.0568.97 000.0SwitchingNon blocking Layer 1 capacity10 416.714 000.01 644.714 000.0568.914 000.0
CRS112-8P-4S-IN is eight Gigabit RJ45 ports PoE switch that offers different power output options: autosensing 802.3af/at PoE/PoE+ and Passive PoE and four SFP ports provide optical fiber connectivity options to support uplinks of up to 1 Gbps.CRS112-8P-4S-IN is equipped with 12 independent switching ports. 28 V 3.4 A power supply is already included in the box. There is secondary DC jack on the back of the enclosure that supports 48-57 V power supply (not included can be purchased separately). CRS112-8P-4S-IN can power 802.3af/at devices if 48-57 V DC input is used (unit will automatically detect and provide correct power to devices). Max current is 1 A per port if input voltage is 18-28 V 450 mA if 48-57 V. Total limit is 2.8A@24V and 1.4A@48-57V. • Non-blocking Layer 2 switching capacity• 16K host table• IEEE 802.1Q VLAN• Supports up to 4K simultaneous VLANs• Port isolation• Port security• Broadcast storm control• Port mirroring of ingress/egress traffic• Rapid Spanning Tree Protocol• Access Control List• MikroTik neighbor discovery• SNMP• 9204-byte jumbo frames support• IGMP snooping• static link aggregation
The CRS305 is a compact yet very powerful switch featuring four SFP+ ports for up to 10 Gbit per port. The device has a 1 Gbit copper ethernet port for management access and two DC jacks for power redundancy. The device is a very sleek and compact metallic case without any fans for silent operation.The device has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS. If you prefer to have a simplified operating system with only switch specific features use SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS use RouterOS. You can select the desired operating system from RouterOS from SwOS or from the RouterBOOT loader settings. All the feature set comes with a disruptive price providing the best price/performance on the market.5 Port PoE-Switch 802.3af/at PoE/PoE+ and 12-57 V passives PoE. Cloud Router Switch with 1 Gigabit Ethernet Port and 4 SFP+ Ports. Dualboot - RouterOS or SwOS.
The CRS309-1G-8S+ is a very compact yet powerful networking switch. It has eight SFP+ slots supporting up to 10 Gbit module in each which results in a total switching capacity of 162 Gbps and total non-blocking throughput of 81 Gbps.The device also has dual-core 800 MHz CPU 512 MB RAM a management Ethernet port with PoE power input RS232 serial port a grounding terminal and is capable of dual boot (choose which operating system you prefer RouterOS or SwOS).The compact and sleek metallic enclosure also acts as a heatsink making this device passively cooled - no fan noise and no dust accumulation inside. Special rackmount ears for installing unit into the standard rack are provided.
