I AM PHOTOGRAPHER

An extraordinary light with high color rendering index (TLCI 96+ / CRI 95+), high brightness, ultra-quiet cooling and Bowens mount. SmallRig 3618 RC 220D (Daylight) Cob Light The maximum illumination reaches 10100Lux at a distance of one meter. RC 220D adopts COB high luminescence efficiency integrated surface light source technology, while the heat sinking process provides high lumens and high illuminance of greater stability. With hyper reflector mounted, the center illuminance reaches 98700Lux at a distance of one meter. Equipped with the included hyper reflector featuring an anti-reflection coating. For many creators, the accuracy of color rendering is more important than the brightness, because post- shooting editing can not reverse poor color rendering. According to the standards of CRI and TLCI color evaluation systems, SmallRig RC 220D have great color rendering, with accurate reproduction of natural colors and stable color performance, which make them stand out among products of the same price range and specification (TLCI 96+ / CRI 95+) Dual power supply system These products support two types of power supply: AC power supply adapter and 14.4V/26V V-mount battery power supply. When powered by a V-mount battery, the body has a power level indication. Featuring a clasp on the power plug to secure it firmly when shooting. (a V-mount battery plate can be fixed on the light stand or desktop) Ultra-quite active cooling system When the temperature of the light body reaches 60℃, the active cooling system will be work. An ultra-quiet fan will be automatically turned on, with a noise of only 30dB ± 2dB at a distance of one meter. Moreover, when the temperature is too high, the lamp will enter self-protection mode, where the power will be automatically reduced to 70% to ensure the proper function. Intelligent remote light control with SmallGoGo app RC 220D supports two types of light control. Manual adjustment and SmallGoGo app control. The SmallGoGo App allows to control multiple SmallRig lights simultaneously and achieve full signal coverage and unlimited control distance thanks to the built-in Mesh Bluetooth networking module. Nine light effects 9 lighting FX: Paparazzi, Fireworks, Lightning, Fault bulb, TV, Breath, Flash, Party, Flame Six-Meter power cable (three-meter power cable + three-meter adapter output cable) Long power cables enable the RC 220D to have a broader range of unrestricted movement even when plugged in. Standard Bowens mount RC 220D adopts a Bowens mount, is fully compatible with various accessories with the Bowens mount on the market, and provides more lighting possibilities. Umbrella hole Easy to assemble and disassemble umbrella lighting accessories featuring built-in umbrella holes. 270° barrier-free tilt adjustment This product have a reasonable metal core structure, with reduced material costs and a better tilt adjustment experience. Compact and Portable RC 220D will come with a durable Snow canvas storage bag providing precise space for the body, standard hyper reflector, and power cable for easy storage and protection. Versatile application Meet the content creators´ needs in various creations such as portrait photography, product photography, video production, live streaming, etc. Package included: 1x SmallRig 3618 RC120D 1x Hyper Reflector 1x Power Cable 1x Power Adaptor 1x Protection Cover 1x Carrying Bag 1x User Manual

An extraordinary light with high color rendering index (TLCI 96+ / CRI 95+), high brightness, ultra-quiet cooling and Bowens mount. SmallRig 3621 RC 220B (Bi-Color) Cob Light The maximum illumination reaches 8670Lux at a distance of one meter with a color temperature of 5600k RC 220B adopts COB high luminescence efficiency integrated surface light source technology, while the heat sinking process provides high lumens and high illuminance of greater stability. With hyper reflector mounted, the center illuminance reaches 84500Lux at a distance of one meter with a color temperature of 5600k Equipped with the included hyper reflector featuring an anti-reflection coating For many creators, the accuracy of color rendering is more important than the brightness, because post-shooting editing can not reverse poor color rendering. According to the standards of CRI and TLCI color evaluation systems, SmallRig RC 220B have great color rendering, with accurate reproduction of natural colors and stable color performance, which make them stand out among products of the same price range and specification (TLCI 96+ / CRI 95+) Dual power supply system These products support both power supply by AC-adapter and 14.4V/26V V-mount battery power. When powered by a V-mount battery, the body has a power level indication. Featuring a clasp on the power plug to secure it firmly when shooting. (a V-mount battery plate can be fixed on the light stand or desktop) Ultra-quite active cooling system When the temperature of the light body reaches 60℃, the active cooling system will be work. An ultra-quiet fan will be automatically turned on, with a noise of only 30dB ± 2dB at a distance of one meter. Moreover, when the temperature is too high, the lamp will enter self-protection mode, where the power will be automatically reduced to 70% to ensure the proper function. Intelligent remote light control with SmallGoGo app RC 220B supports two types of light control. Manual adjustment and SmallGoGo app control. The SmallGoGo App allows to control multiple SmallRig lights simultaneously and achieve full signal coverage and unlimited control distance thanks to the built-in Mesh Bluetooth networking module. Nine light effects 9 lighting FX: Paparazzi, Fireworks, Lightning, Fault bulb, TV, Breath, Flash, Party, Flame Six-Meter power cable (three-meter power cable + three-meter adapter output cable) Long power cables enable the RC 220B to have a broader range of unrestricted movement even when plugged in. Standard Bowens mount RC 220B adopts a Bowens mount, is fully compatible with various accessories with the Bowens mount on the market, and provides more lighting possibilities. Umbrella hole Easy to assemble and disassemble umbrella lighting accessories featuring built-in umbrella holes. 270° barrier-free tilt adjustment This product have a reasonable metal core structure, with reduced material costs and a better tilt adjustment experience. Compact and Portable RC 220B will come with a durable Snow canvas storage bag providing precise space for the body, standard hyper reflector, and power cable for easy storage and protection. 2700K-6500K wide color temperature range RC 220B supports color temperature adjustment in the range of 2700K-6500K. Versatile application Meet the content creators´ needs in various creations such as portrait photography, product photography, video production, live streaming, etc. Package included: 1x SmallRig 3621 RC220B 1x Hyper Reflector 1x Power Cable 1x Power Adaptor 1x Protection Cover 1x Carrying Bag 1x User Manual

SmallRig 17mm threaded lens backplate for iPhone 13 Pro Max cage 3634 Key Features: 1. Can be used with a 17mm threaded lens to enhance the quality of your iPhone camera. 2. It is locked by screws, can be replaced by the M-mount backplate of the original cage after removing it. 3. The precise holes do not block the camera of your iPhone. SmallRig 17mm threaded lens backplate for iPhone 13 Pro Max cage 3634, can be used with 17mm threaded lens, the backplate is locked by three screws which can be removed, and can be replaced by the original M-mount backplate of the cage 3561, which allows attaching lenses of different mounts； The precise holes do not block the camera such as Ultra -Wide of your iPhone. Note: Will only be used with SmallRig iPhone 13 Pro Max cage 3561； keep it away from strong acids. Compatibility: iPhone 13 Pro Max cage 3561 Package Includes: 1 x 17mm Threaded Lens Backplate 3 x Screws 1 x Wrench Product Dimensions: 91 x 51.5 x 5.8mm Package Dimensions: 106 x 99 x 33 mm Net Weight: 27g Package Weight: 57g±5g Material: Aluminum Alloy

Designed to provide the handheld solution, accessory attachment, and protection for the camera, and particularly during low-angle shooting, ease burdens on the arm and assist in camera movements. The kit comes with a Cage for Nikon Z9 (3195) and an ARRI Top Handle (2165) and maintains access to buttons, holes, card slots, battery door, and flip screen after installation. SmallRig 3738 Cage Kit For Nikon Z9 The cage is locked via a 1/4´´-20 screw at the bottom, locating pin and the shoulder strap ring on the right side. The top handle is ergonomically designed to increase comfort and allows quick assembly and disassembly. Built-in mounting points are fully compatible with the SmallRig accessory system. Featuring 1/4´´-20 threaded holes and ARRI 3/8"-16 locating holes for SmallRig Side Handle 2093 or 2426 for side handheld shooting and camera movements, and ARRI 3/8"-16 locating hole on the top of the handle for Monitor Mount 2903 and a cold shoe mount for microphones, LED lights. Arca quick release plate on the bottom of the cage fits directly on to a tripod for tripod shooting. Two 1/4´´-20 threaded holes at the bottom of the front, support SmallRig Rod Clamp 942 for attach 15mm rail support system to attach lens support, follow focus, matte box, etc. Besides, comes with protective cushions inside to prevent scratches and provides a built-in magnetic spanner for easy access. Compatibility: Nikon Z9 Note: Please remove the shoulder strap ring on the right side before attaching the cage. The cage is not compatible with Nikon WR-R11 remote controller. Package Includes: 1 x Cage 3195 8 x M3 Screw 1 x Top Handle 2165

With a diameter of 65cm, a depth of 56cm and a weight of 1348g, RA-L65 is compact and easy to use; it is made of high-performance soft fabric and highly reflective coating, rendering the color temperature and CRI and creating a more delicate three-dimensional soft light effect through the even spherical light. SmallRig 3754 RA-L65 Lantern Softbox Faster lighting setup with one-piece design One step to set up the softbox: Press the Bowens mount until the bottom hook is hooked. No extra manual work is needed when install and disassemble, for the bottom, rib, and top disk of the lantern is fixed together at the factory. What’s more, the bottom hook is upgraded to a wider one, which can solve the laborious problem and the directions of hook can not be seen clearly, which saves time and make it easier to install. Upgraded construction RA-L65 is equipped with 12 military-grade high-temperature resistant ribs. Lighter, tougher and more elastic than ordinary stainless ribs and 3 times easier to install, it can withstand tens of thousands of pressures without deformation. Flexible light control When doing research, we found that many creators have their own ideas about lighting setups, so it is necessary to provide a few more pieces of fabric diffusion and black fabric barn doors.The softbox will come with standard Black fabric barn door which adopts a Velcro design for easy installation. Standard Bowens mount The softbox adopts a Bowens mount, is fully compatible with various accessories with the Bowens mount on the market, and provides more lighting possibilities. Cylinder pouch for easy storage The softbox will come with a cylinder storage pouch having an open top for easy storage.

SmallRig 3765 ARRI kinnitusega ülemine käepide, millel on 3 eesmist ja 2 tagumist külgkinnitust (cold shoe), mis võimaldavad samaaegselt kinnitada mikrofoni, LED-valgusti, monitori ja muid tarvikuid. ARRI 3/8"-16 kinnitusega augud toetavad SmallRigi monitorikinnitusi 2903 ja 2348, et lisada monitore. 1/4"-20 keermestatud augud sobivad SmallRigi Magic Arm 2070 jaoks monitoride kinnitamiseks ja kaugjuhtimisseadme 2924 jaoks salvestamiseks. Komplektis olev kuuskantvõti aitab lukustuskruvi pingutada, muutes kokkupaneku ja lahtivõtmise lihtsaks. Maksimaalne kandevõime on 10 kg. Ühilduvus: ARRI 3/8"-16 kinnitusega korpused Komplekt sisaldab: - 1 x ülemine käepide - 1 x kuuskantvõti Designed to facilitate low-angle shot and reduce burdens on arms. The ergonomic handle, featuring anti-slip and anti-freeze silicone, feels comfortable and weighs only 124g because of a hollowed-out structure. SmallRig 3765 ARRI Locating Top Handle has 3 front cold shoes and 2 rear cold shoes that allow simultaneously mounting microphone, LED light, monitor, and other accessories. ARRI 3/8"-16 locating holes support SmallRig Monitor Mount 2903 and 2348 to attach monitors. 1/4"-20 threaded holes support SmallRig Magic Arm 2070 for monitors and Remote Control 2924 for recording. An Allen Wrench helps tighten the locking screw, making it easy to assemble and disassemble. Note: Maximum load capacity is 10kg Compatibility: Cages with ARRI 3/8"-16 locating hole Package Includes: 1 x Top Handle 1 x Allen Wrench Vastutav isik ELis: GAVIMOSA CONSULTORIA, SOCIEDAD LIMITADA, CASTELLANA 9144, Madrid, 28046, ES, compliance.gavimosa@outlook.com

Ergonomically designed to improve grip experience, facilitate low-angle shot and reduce burdens on arms. SmallRig 3766 Nato Top Handle The ergonomic handle, featuring anti-slip and anti-freeze silicone, feels comfortable and weighs only 124g because of a hollowed-out structure. It has 3 front cold shoes and 2 rear cold shoes that allow simultaneously mounting microphone, LED light, monitor, and other accessories. ARRI 3/8"-16 locating holes support SmallRig Monitor Mount 2903 and 2348 to attach monitors. 1/4"-20 threaded holes support SmallRig Magic Arm 2070 for monitors and Remote Control 2924 for recording. Its quick-release NATO clamp fits all standard NATO rails. Compatibility: Any accessories features NATO Rail In the Box: 1 x Top Handle

Designed to protect the camera and attach accessories. The cage features rubber pads that prevent scratches and gives full access to buttons, card slots, flip screen, and battery door. SmallRig 3940 Cage For Nikon Z 8 Locking the camera via one bottom 1/4 "-20 screw, one locating screw, and one side lock adapter on the right Among its accessory mounting points, 1/4"-20 threaded hole, 3/8"-16 threaded hole, and ARRI 3/8"-16 locating hole support SmallRig Side Handle 2093 & 3814, Top Handle 3765, Monitor Mount 2903 & 2904, Manfrotto Plate 1280 & 2458, Holder for Portable Power Banks 2336 and mini V Mount Battery Plate 2987. The side 1/4"-20 locating hole fits SmallRig Single Rod Clamp 3598 and Magic Arm 3873, and left NATO rail quickly connects SmallRig Side Handle 3847 & 4017. Besides, there are cold shoe mounts for the microphone and LED video light, strap holes for Smallrig Hand Strap 3848 & 2456, and QD mounts for the QD strap buckle. The bottom Arca-Swiss quick-release plate supports Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals for a quick switch between gimbal, handheld, and tripod modes. A double-ended wrench is also included for easy disassembly and assembly. Compatibility: Nikon Z 8 Package includes: 1x Cage

Designed for Nikon Z 8 to assist with handheld shooting and attach accessories. It includes a cage, an HDMI & USB-C cable clamp, and a top handle. SmallRig 3941 Cage Kit For Nikon Z 8 With a 1/4"-20 threaded hole, 3/8"-16 threaded hole, ARRI 3/8"-16 locating hole, NATO rail, and cold shoe mount, the kit can mount a monitor, microphone, tripod, follow focus, handle, etc. Among its three parts, the cage locks the camera via one bottom 1/4"-20 screw, one locating pin, and one side lock adapter. The ergonomic handle facilitates shooting in motion, providing a comfortable and stable user experience. And the HDMI & USB-C cable clamp, tightened by a hand screw, ensures stable signal transmission. Besides, a magnetic double-ended wrench is included for easy disassembly and assembly. Compatibility: Nikon Z 8 Package includes: 1x Cage 1x Cable Clamp 1x Top Handle

Designed for Nikon Z 8 and to protect the camera and attach accessories. The cage gives full access to buttons, card slots, battery door, and the flip screen. SmallRig 3982 Cage for Nikon Z 8 with MB-N12 Battery Grip It locks the camera via one bottom 1/4"-20 screw and one M2.5 screw on both sides, and have rubber pads which preventing scratches There is many accessory mounting points; 1/4"-20 & 3/8"-16 threaded hole and ARRI 3/8"-16 locating hole which can support SmallRig Top Handle 2165 & 1638, Side Handle 2093 & 2425, Monitor Mount 2903 & 2904 and Magic Arm 3875 Two cold shoe mounts fit a microphone and LED video light The Arca Swiss quick-release bottom plate and side plate enable horizontal and vertical shooting on tripods. The bottom Arca-Swiss quick-release plate also supports DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals for a quick switch between handheld, gimbal, and tripod modes. At the front end, there are two 1/4"-20 threaded holes for SmallRig Dual 15mm Rod Clamp 942, matte box and lens support One 1/4"-20 locating hole for SmallRig Single Rod Clamp 3276 for follow focus. Besides, a magnetic double-ended wrench is included for easy disassembly and assembly. Compatibility: Nikon Z 8 with MB-N12 Battery Grip Packaging includes: 1x Cage

The charger adopts a double-slot design, which can charge two batteries at the same time. The LCD screen displays the charging voltage, charging current, and charging quantity in real-time, allowing users to see the charging voltage, charging current, and quantity more intuitively. SmallRig 4086 Battery Charger For NP-F970 Batteries SmallRig camera battery charger is made of high-quality ABS+PC fireproof material. The surface is frosted, high temperature resistant, tactile and durable. The built-in battery compartment is the same size as the original camera battery closely fits the camera battery compartment, and is installed without jamming The LCD screen displays the charging voltage, charging current, and charging quantity in real-time, allowing users to see the charging voltage, charging current, and quantity more intuitively. The charger has a built-in USB-A charging line and USB-C input port, which can be charged in any way through the charger, car charger, and mobile power supply. Note: For the best charging experience, a power adapter with a higher than 5V⎓2.1A output is recommended. Do not use the two input interfaces at the same time. The kit does not include a USB power adapter. Technical Data Charger Input: Micro USB: 5V⎓2.4A USB-C: 5V⎓2.4A Micro USB: 9V⎓2A USB-C: 9V⎓2A Charger Output: 5V Input: 8.4V⎓1000mA (Single) 8.4V⎓700mA (Dual) 9V Input: 8.4V⎓1500mA (Single) 8.4V⎓1000mA (Dual) Operating Environment Temperature: 0°C~40°C Compatible with: Sony camera batteries NP-F970 Packaging includes: 1 × Dual Battery Charger (Built-in USB-A Cable)

A professional light modifier. which allows the photographer to control light spread without changing its characteristics. SmallRig 4204 RA-BD08 Barndoors 8-leaf Each leave can be adjusted independently and rotated 360° to control and shape the light output. It comes standard with a 30-degree honeycomb grid, effectively narrowing beam spread. The color gel frame features four magnets for quick, stable installation of filters of different colors. Bowens mount ring adapter - Compatible with all Bowens mount COB lights Can also support mostly lights with 18cm standard reflectors for multi-scene lighting purpose. Highly compatible with most lights Bowens mount ring adapter for all Bowens mount light on the market. Supports 95% of 18cm standard reflectors available. Prevents light spill Longer and wider leaves effectively cut the beam to prevent spill light. Increased leaves better control and shape the light output. Meets your needs under different scenarios. Accurately adjustable for large-area lighting or local lighting. Axis damping allows leaves to flip smoothly and stop where you want them to. Includes various accessories for creative multiple-scene use The leaves together with color gel allows RGB lighting effect and prevents beam from spilling. Spread the 4 leaves 180° flat, and the color gel alone can achieve RGB lighting effect. Comes standard with a 30-degree honeycomb grid to narrow the beam spread. Bowens Mount Ring Adapter. Durable and user-friendly The Bowens mount ring adapter and leave fastener ensure firm and secure connection. 4magnets, works with color gel frame is powerful enough to hold filters of varied thickness and material The non-slip sponge cover feels comfortable while protecting fingers. The Honeycomb grid adapts powder spraying technology, which is anti-rust and high-temperature-resistant, also has a little label for quick removal and installation. The durable metalleaves also have black matte paint so that they do not rust And the nylon bracket makes it a lightweight item to be carried around. Compatibility: Bowens mount light Package includes: 1x 8-leaf Barndoor 1x Bowens Mount Ring Adapter 1x Honeycomb Grid 1x Color Gel Frame

SmallRig 4249 Super Clamp ARRI roseti kinnitusega klamber toetab standardseid M6 kruvisid ja ARRI rosetiga käepidemeid, nagu Nikon MC-N10 ja Sony FX6. Klambril on 14–55 mm haardevõime, mis võimaldab kinnitada enamiku statiivi käepidemeid ja torusid. Lisaks on see varustatud sisseehitatud libisemisvastaste padjanditega, et tagada seadmete ohutus ja stabiilsus. Omadused: - Mitmed kinnituskohad, näiteks 1/4"-20 keermestatud ava ja ARRI 3/8"-16 asukohaava, mis võimaldavad kinnitada SmallRigi Magic Arm 3875, 2115 jms. - Valmistatud lennundusklassi alumiiniumisulamist ja roostevabast terasest, mis tagab suurema vastupidavuse ja tugevuse. Palun ärge võtke roseti adapterit lahti, kuna see võib põhjustada lõtvust ja ühenduse katkemist. Kandevõime: 5 kg Ühilduvus: - Nikon MC-N10 kaugjuhtimispult - Sony FX6 kaugjuhtimiskäepide - Standardne M6 kruvi, käepidemed ja tarvikud ARRI rosetiga Pakend sisaldab: - 1x Super Clamp ARRI roseti kinnitusega Designed for remote handles to be attached to a tripod or slider for easier shooting. Allows to connect handles with ARRI rosette to a tripod or telescopic handle of the slider for easier camera shooting and movemen SmallRig 4249 Super Clamp with ARRI Rosette Mount It supports standard M6 screws and handles with ARRI rosettes like Nikon MC-N10 and Sony FX6. With a 14-55mm clamping range, this item can clamp most tripod handles, rods, and comes with built-in anti-slip cushions to ensure the safety and stability of the devices. Features multiple mounting points, such as 1/4"-20 threaded hole and ARRI 3/8"-16 locating hole to attach SmallRig Magic Arm 3875 & 2115 etc. Besides, the clamp is made of aircraft-grade aluminum alloy and stainless steel for increased sturdiness and durability. Note: Please do not disassemble the rosette adapter, it may causeloose and disconnection Load capacity: 5kg Compatibility: Nikon MC-N10 Remote Grip Sony FX6 Remote Handle Standard M6 screw, handlesand accessories with ARRI rosette Package includes: 1x Super Clamp with ARRI Rosette Mount Vastutav isik ELis: GAVIMOSA CONSULTORIA, SOCIEDAD LIMITADA, CASTELLANA 9144, Madrid, 28046, ES, compliance.gavimosa@outlook.com

Designed for professional outdoor videography, offering swift and convenient operation. Featuring X-clutch hydraulic technology, squeezing a single clutch allows all legs to rapidly unfold, adjust the angle, and automatically lock in just one second, providing photographers with a seamless experience. Operating Altitude ranges from 27cm to 168cm, and a compact storage length of 79 cm. SmallRig 4259 x Potato Jet Tribex Hydraulic Carbon Fiber Tripod Kit The clutch can also be adjusted to 45° and 90° to accommodate various shooting scenarios. Constructed with carbon fiber, both the legs and central column ensure lightweight design while delivering exceptional stability and high load-bearing capacity The central column features a quick-lock design for easy height adjustments, with a detachable allen wrench built into the other side of the hook for convenient camera equipment assembly/disassembly, and the option for low-angle shooting at a minimum height of 27cm. The compact design of the tripod allows it to fit in any standard luggage. The kit includes a compact and lightweight hydraulic fluid head featuring an adjustable 4-step counterbalance system. When the gravitational center height is set at 55mm, the 4-step counterbalance system effectively stabilizes cameras or other equipment up to 6 kg while providing precise control over camera tilt. The fluid head allows seamless, stepless adjustments for tilt and pan damping, catering to filmmakers´ varying shooting preferences. The fluid head adopts a new Touch-and-Go quick release mount plate design which does not require alignment and is more efficient than traditional slide-in plates. The plate is compatible with Manfrotto and DJI RS series quick release plates, facilitating swift transitions between stabilizers and tripods during filming. The user-friendly detachable telescopic handle (22-35cm) enables easy control of the head when attached to either the left or right side, ensuring compatibility with any grip. The fluid head also features two 1/4"-20 threaded holes for attaching accessories like magic arms, along with a built-in flat head screw for convenient camera installation and removal. The tripod also includes quick-release rubber feet with integrated spikes, allowing for seamless adaptation to various terrains. Note: The weight capacity of the tripod head is not the absolute limit - it varies depending on the type of equipment, lenses used, accessories attached, and changes in the center of gravity. Max payload of tripod: 25kg (center column not raised, tripod head detached, leg angle at 23°, height at 141cm). After use in water, it needs to be dried before use. Technical info: Legs Diameter: 29.5mm - 25.5mm - 22mm Fluid Head Base Diameter: 60.0mm Tilt Range: +90°/-65° Counterbalance Payload: 0 - 6.0kg Counterbalance Step: 4-Step (0,1, 2, 3 ) Tilt Control: Stepless Pan Control: Stepless Compatibility: Manfrotto 501PL Quick Release Plate DJI RS Series Quick Release Plate Package includes: 1x Tripod Kit 1x Allen Wrench 1x Storage Bag 1x Smartphone Holder

Nikon Smallrig käepide Nikon Z f kaamerale. See tekstuurne käepide võimaldab Nikon Z f-l sügavamat haaret ja on loodud sobima kaameraga. D-rõngaskruvi kinnitab käepideme kaamera külge ja integreeritud Arca-Swiss plaat võimaldab kiiresti lülituda statiiviga pildistamisele. Kaamera mälukaardi ja akupesasid käepida ei kata.

Comes with a USB-C input/output port to be charged via a portable charger, power strip, car charger, or dedicated charger and with a USB-A output port to turn itself into a power bank, which can power up smartphone, iPad and other devices. SmallRig 4267 Camera Battery USB-C Rechargable NP-F970 Its USB-C port supports PD 3.0 protocol, making the battery full in just 6 hours. 10500mAh large capacity ensures equipment run for prolonged time Indicators help check battery status. Highly compatible and versatile, this battery also supports such rigs as camera, LED video light, monitor, slider, etc. It features fire-resistant, durable ABS and PC shell, frosted to have a delicate touch. Compatibility: Camera, LED video light, monitor, slider, etc. Certifications: This product system have passed the rechargeable battery certificationfor safty and efficiency: FCC / UL / UKCA / CE / RoHS / ISED Specifications: Battery Specification - 10500mAh 7.27V 76.3Wh Input Voltage - 8.4V Nominal Voltage - 7.27V Cell Nominal Capacity - 10500mAh Battery Nominal Capacity - 9970mAh Input Current: Slow Charging: 2100mA Fast Charging: 5250mA Maximum Input Current - 0.5C USB-C Input/Output - 5V/3A, 9V/2.22A, 12V/1.67A USB-C Protocol - PD3.0 / QC2.0 / QC3.0 / FCP / AFC / SCP / SSCP / PPS USB-A Output - 4.7~5.25V / 2.1A USB-C / USB-A Overcurrent Protection Range - 3.4~4A Maximum Output Current - 10A Over-discharge Protection Range - 12~18A Cut-off Voltage - 5.0V Operating Temperature - 0℃~45℃ Material(s) - PC+ABS Indicator Button: Short-press to check power status, when LED lights stay on for 30s and USB port supplies power. Double-press to turn it off. Status Indicator: Power status: 4 LED lights display power percentage—one for 1-25%, two for 25%-50%, three for 50%-75%, and four for 75%-100% Blinking light means low battery. Lights keep flashing when charging and stay on when discharging. Package includes: 1x NP-F970 USB-C Rechargeable Camera Battery 1x Battery Cover 1x USB-C to USB-C Charging Cable

Designed to facilitate camera movement and stabilize dual-handed shooting while providing basic mounting points. The highly versatile handle adopts the ARCA-Swiss Type interface and is compatible with the built-in ARCA-Swiss mount plate, cages, L-Bracket, Rotatable Horizontal-to-Vertical Mount Plate, etc. SmallRig 4416 Side Handle ARCA-Type Features ergonomic design, which allows to use of the left & right hand interchangeably to provide a comfortable grip. According to the actual camera size, the handle can be adjusted 36mm vertically to ensure the best grip position. Mainly made of high-strength aluminum alloy, and the stretchable mounting points (1/4"-20 locating holes and ARRI 3/8"-16 locating holes) are made of stainless steel material. Features silicon pads on the contact surface with the palm, which are anti-freeze and anti-slip. Comes with 1/4"-20 threaded hole, 1/4"-20 locating hole, strap hole, cold shoe for attaching SmallRig Monitor Mount 2905, Ballhead Magic Arm 3875, LED Video Light 3286, Microphone 3468, etc. Besides, a built-in magnetic Allen Wrench is included for easy mounting and adjusting accessories. Compatibility: ARCA-Swiss mount plate, cages, L-Bracket, Rotatable Horizontal-to-Vertical Mount Plate, etc. Pacakge includes: 1x Handle 1x Handle Adapter

SMALLRIG 4519 Camera Cage for Nikon Z 6III is designed to provide protective housing and versatile expansion options for a camera. The cage securely fastens the camera with a 1/4"-20 screw at the bottom and dual M2.5 screws on the sides, while integrated pads prevent scratching. It provides unobstructed access to all camera interfaces, card slots, the flip screen, and the battery door. The cage features various expansion options, such as 1/4"-20 threaded holes, 3/8"-16 threaded holes, and ARRI locating holes, compatible with SmallRig side handles 2093, 4015, top handles 3765, 2165, monitor mounts 2903, 2904, tripods 4465, 3989, power bank holders 2336 and mini V-mount battery plates 2987. Incorporated 1/4"-20 locating holes on the sides allow for the attachment of accessories such as SmallRig single rod clamp 3598, magic arm 3873, and side handle 4346. Featuring a built-in NATO rail on the left for rapid attachment and detachment of SmallRig side handles 3847, 4017. The integrated cold shoe mounts support microphones, LED video lights, and more. Featuring a built-in wrist strap slot for use with SmallRig wrist straps 3848, 2456, as well as an integrated QD interface compatible with shoulder strap 4118. Arca-Swiss quick-release plate on the bottom is compatible with Arca-type tripods and DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro/ RS 4 / RS 4 Pro gimbals, which allows for easy transitions between gimbals, handheld and tripod shooting. Additionally, a dual-head flat wrench on the base simplifies assembly and disassembly. Compability: Nikon Z 6III Packaging includes: 1x Cage

SMALLRIG 4520 Camera Cage Kit for Nikon Z 6III kit includes a cage, an HDMI & USB-C cable clamp, and a top handle. Designed to provide enhanced handheld shooting, portability, and accessory expansion. The cage features multiple expansion options, such as 1/4"-20 threaded holes, 1/4"-20 locating holes, 3/8"-16 threaded holes, ARRI locating holes, cold shoe mounts, NATO rail, QD mounts, wrist/shoulder strap holes, allowing for the expansion of accessories like monitors, microphones, tripods, follow focuses, handles, and more for versatile video content creation across different scenarios. The cage securely locks the camera with a 1/4"-20 screw at the bottom and dual M2.5 screws on the sides. The ergonomic handle facilitates on-the-go shooting, providing a comfortable and stable filming experience. It is equipped with an HDMI & USB-C cable clamp that securely fastens with a simple twist of a thumbscrew, preventing accidental signal interruptions and ensuring stable signal transmission. Arca-Swiss quick-release plate on the bottom is compatible with Arca-type tripods and DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro/ RS 4 / RS 4 Pro gimbals, which allows for easy transitions between gimbals, handheld and tripod setups. In addition, a magnetic dual-head flat wrench is integrated into the baseplate for easy assembly and disassembly. Compability: Nikon Z 6III Packaging includes: 1x Cage 1x HDMI & USB-C Cable Clamp 1x Top Handle

SMALLRIG 4521 Night Eagle Cage will provide protective housing and versatile expansion options for Nikon Z 6III camera. The cage features a modern design with sleek curves, subtle gold highlights, and a new gunmetal brown color scheme. It adopts a three-point locking system that secures Nikon Z 6III via a bottom 1/4 "-20 screw and two M2.5 screws on both sides, while built-in silicone pads prevent the camera from scratches. It provides unobstructed access to buttons, card slots, flip screens, and battery compartments. The detachable cold shoe mount features anti-deflection positioning pins at the bottom. It can be attached to the sides and top of the cage, allowing for versatile expansion with microphones, lights, and other accessories. The cage features various expansion interfaces, such as 1/4"-20 threaded holes, 3/8"-16 threaded holes and ARRI locating holes, compatible with SmallRig side handles 2093, 4015, top handles 3765, monitor mounts 2903, 2904, tripods 3989, 4465, power bank holders 2336 and mini V-mount battery plates 2987. Incorporated 1/4"-20 locating holes on the sides allow for the attachment of accessories such as the SmallRig single rod clamp 3598, magic arm 3873, and side handle 4346. Featuring a built-in NATO rail on the left for rapid attachment and detachment of SmallRig side handles 3847, 4017. The cage also features built-in wrist strap slots for use with SmallRig wrist straps 3848, 2456, as well as an integrated QD interface compatible with SmallRig shoulder strap 4118. Arca-Swiss quick-release plate on the bottom is compatible with Arca-type tripod and DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro/ RS 4 / RS 4 Pro gimbals, which allows for easy transitions between gimbals, handheld and tripod setups. Additionally, a dual-head flat wrench on the base simplifies assembly and disassembly. Compability: Nikon Z 6III Packaging includes: 1x Cage 1x Cold Shoe Adapter

SMALLRIG 4522 Night Eagle Cage Kit for Nikon Z 6III includes a cage, a top handle, an HDMI & USB-C cable clamp, and a cold shoe mount. Designed to provide enhanced low-angle shooting, protective housing, and versatile expansion options for a camera. The cage features a modern design with sleek curves, subtle gold highlights, and a new gunmetal brown color. The cable clamp adopts a press-and-flip design that allows for easy access to the interfaces without disassembling and prevents accidental signal interruptions ensuring stable signal transmission. The detachable cold shoe mount features anti-deflection positioning pins at the bottom. It can be attached to the sides and top of the cage, allowing for versatile expansion with SmallRig microphones 3487, LED video lights 3286, and other accessories. The ergonomic handle facilitates camera movement and features built-in storage for commonly used screws such as 1/4"-20 screws, 3/8"-16 screws, and M2.5 screws. The kit features various expansion interfaces, such as 1/4"-20 threaded holes, 1/4"-20 locating holes, 3/8"-16 threaded holes, ARRI locating holes, NATO rail, QD mounts, wrist/shoulder strap holes. The cage can be expanded with SmallRig monitor mounts 2903, side handles 3847, 4016, 4015, 2093, top handles 2165, 3765, rod clamps 3598, magic arms 3875, tripods 4465, 4060, 4353, LED video lights 3286, microphones 3487, and more. The integrated Arca-Swiss quick-release plate on the bottom supports Arca-type tripods and DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro/ RS 4 / RS 4 Pro gimbals, which allows for easy transitions between gimbals, handheld and tripod setups. Compability: Nikon Z 6III Packaging includes: 1x Cage 1x Cold Shoe Mount 1x HDMI & USB-C Cable Clamp 1x Top Handle

SMALLRIG 4524 Cage for Nikon Z 6III with MB-N14 Vertical Grip integrated design ensures a secure and snug fit for the camera, providing comprehensive protection. Stability Locking System: Three-point system secures the camera with screws to prevent twisting and ensure stability. Dual Arca-Swiss Transition: Quick release plates on base and side facilitate smooth switching between landscape and portrait orientations. Versatile Interface Options: Various built-in interfaces cater to different shooting scenarios, offering flexibility. Compability: Nikon Z6 III with MB-N14 Vertical Grip Packaging includes: 1x Cage

An integral component of SmallRig´s portable lighting ecosystem. Crafted from aluminum alloy in a sleek dark color scheme, this compact and lightweight video light is both stylish and practical, fitting easily into any photography backpack. Ideal for weddings, live streaming, and content creation on mobile phones. SmallRig 4634 Portable Focusable LED Video Light RF 10C Featuring four-color LED lamp beads (sunset orange, blue, white, and red), with a maximum power of 10W and a CRI Ra≥96, TLCI≥98, illuminance reach 1,570lux@0.5m/ 5600K, this high-quality light source ensures professional color rendering and brightness adjustment to meet various shooting requirements. Ultra-Portable and Lightweight: Weighing only 422g with a compact 4.3cm (1.7in) diameter, this sleek aluminum alloy light is easy to carry, ensuring a comfortable grip and effortless portability. Anti-Misoperation Design: Requires button rotation to power on, preventing accidental activation and conserving energy. Long-lasting Battery Life: Built-in 7500mAh lithium battery supports USB-C charging, delivering up to 3 hours of full-power lighting for uninterrupted shooting. Versatile Mounting Options: Three 1/4"-20 threaded holes on the side and rear allow flexible lighting setups with cameras, tripods, selfie sticks, and more for various shooting needs. Precise Beam Control: The push-pull convex mirror adjusts beam size (10°-60°) smoothly, ensuring precise focus and seamless aperture control. Application Scenes: Backlighting and background light for smartphone video shooting (weddings, live streaming, content creation). Equipped with 20+ light filters, it supports a variety of atmospheric projection effects, enhancing your lighting setup for more creative possibilities. The convex mirror´s front push-pull design facilitates beam size adjustment, providing the capability for precise focusing in a smaller range (adjustable focus angle approximately 10°-60°). The zoom adjustment offers smooth control and excellent damping for seamless aperture range adjustments. With a new anti-misoperation feature, the light requires button rotation to power on, effectively averting inadvertent activation that could result in unnecessary power consumption. With a mere 4.3cm diameter, the handle offers a comfortable and ergonomic grip. Featuring three 1/4"-20 threaded holes on the side and rear, this light enables versatile lighting configurations, catering to a variety of shooting scenarios. Equipped with a built-in 27.75Wh lithium battery that supports USB-C charging, this light provides approximately 3 hours of continuous full-power lighting, ensuring uninterrupted support for your shooting needs. Warning: During prolonged operation, especially under intensive use, the device may generate high temperatures. Please handle with care to prevent accidents. Compatibility: Compatible with accessories featuring 1/4"-20 threaded adapter Compatible with SmallRig RA-S200 Light Stand Package includes: 1x RF 10C Portable Focusable LED Video Light 20x Filters 1x Silicone Bracket for filters 1x USB-C Charging Cable 1x Carry Bag Product Dimensions: 154.0 x 52.0 x 49.0mm / 6.1 x 2.0 x 1.9in Package Dimensions: 175.0 x 103.0 x 103.0mm / 6.9 x 4.0 x 4.0in Net Weight: 422.0g / 14.9oz Gross Weight: 702.8 ± 10g / 24.8 ± 0.4oz Material(s): Aluminum Alloy, ABS Power: 10W Number of LED Beads: 4 Color Options: Sunset Orange, Blue, White, Red CRI Ra: ≥96 Charging Voltage: 5V / 2A Battery Specifications: 3.7V / 7500mAh / 27.75Wh Battery Life: ~3H (Full Power) USB-C Input: Charging at 5V / 2A; 10W Max Input; Charging Time ≤6H

Tailored for mobile shooting, elevating stability for handheld shooting and offering essential mounting options. The handle features two 1/4"-20 threaded holes with an 18mm spacing, ensuring broad compatibility. SmallRig 4755 Lightweight Mini Side Handle Its ergonomic bilateral design enables seamless interchangeability between the left and right sides without the need to reassemble the handle adapter, enhancing the shooting experience with comfort. Featuring a 30mm adjustable handle grip positioning, users can customize the optimal handling based on the device´s dimensions. Equipped with 1/4"-20 threaded holes and positioning holes, the handle supports attaching accessories. Additionally, it features a built-in cold shoe mount to expand with accessories like SmallRig LED Video Light 3286 and On-Camera Microphone 3468. Despite its compact and lightweight design at only 116g, the handle can support up to 5kg. The integrated magnetic Allen wrench facilitates the adjustment and mounting of accessories for seamless operation. Compability: Two 1/4"-20 threaded holes with a spacing of 18mm Packaging includes: 1x Handle 1x Handle Adapter

SmallRig Selection 3242 Portable Light L10 Multi-scene lighting LED light, perfect for; work, Vlog and reading. Including double clamps for; One Mobilephone, two Phones or one Tablet Built-in Lithium battery with 3600 mAh and have USB Type C for faster easier charging There are 5 brightness levels suitable for various scenarios Three color temperatures, for different lightning effects; 3000 / 4000 / 5500K High CRI for better recreation of color and natural light. Max hight: 58cm Foldable and portable Input voltage: 5V/2A Power: 8W Recharging time: 5,5 hours The minimum usable time after fully charged is 3 hours Package Includes: 1 x Lamp 1 x Cable for Charging 1 x Clamp for Smartphones

Specially designed for video shooting and can also be used for smaller spottingscopes. It comes with a removable anti-slip operation lever and can be used for either left handle or right handle, and with an Arca-type quick release plate for a quick switch between handheld shot and tripod shot. SmallRig Selection 3259 Compact Fluid Head CH10 Unlike other traditional fluid heads, it is only 70mm in height and features a 36mm-diameter baseplate, compact and easy to carry around. Fixed damping allows a smooth operation experience. It can be tilted +90°/-55° and swiveled 360° for multi-angle shooting The head also includes a built-in screwdriver. Key features: Compact fluid head, lighter, smaller, and more convenient. Fixed damping for a smooth operation experience. It can be tilted +90°/-55° and swiveled 360°, allowing multi-angle shooting. Pacakge Includes: 1x Fluid Head 1x Arca Swiss Quick Release Plate 1x User Manual

SmallRig Universal Cable Clamp BSC2333 Key Features: 1. Fits any accessories with 1/4”-20 threads. 2. Support 2 cables of various thicknesses of diameter 2-7mm. 3. Secures cable via thumbscrew for quick installment. 4. All screws share one hex spanner. SmallRig Universal Cable Clamp BSC2333 is designed to hold cables in place and prevents cable strain when using cameras or monitors. The clamp is attached to the camera/monitor cage or any other accessories via a 1/4”-20 screw. It’s compatible with cable diameter from 2-7mm thickness and supports 2 cables of various thicknesses the same time without using tools, such as microphone cable, power cable, HDMI and SDI cable. The thumbscrew on each side features a hex spanner hole so that you can use the hex spanner to re-tighten it. All the screws share the same hex spanner included in the package.

Smartmi Rainforest Humidifier Evaporative Humidifier Create a healthy and safe environment in your home. Bad mood, dry eyes and skin - these and other problems are a thing of the past. The Smartmi humidifier is equipped with a 3-liter tank and has a capacity of 200 ml/h. In addition, the device has transparent walls, which allows you to observe water droplets imitating rain. What´s more, the LED display will provide you with the most important information about the operation of the device. In addition, operation of the humidifier is facilitated by the Smartmi Link app and Apple HomeKit. The device also works with Hey Google and Amazon Alexa - with a simple voice command, you can customize its operation. Smartmi Rainforest Humidifier uses evaporative humidification technology. This means that it is equipped with a fan that draws dry air into the device and forces it through a filter. The air returned to the environment is then humidified and cleaned of major contaminants. In addition, it does not produce mist - so you can be sure that it will not damage wooden furniture. On the other hand, the anions generated by the humidifier improve your mood and concentration. The Smartmi Rainforest Humidifier is distinguished by its carefully thought-out design. The device has an LED display that informs about the ѕelected operation mode, Wi-Fi status, humidity level and the amount of water in the tank. What´s more, the main components of the device can be easily disassembled and cleaned, and refilling the tank will not be a problem and will only take a moment. Pollution filtration. The device is equipped with a polymer filter, which effectively filters out contaminants, prevents the proliferation of bacteria, mold and unpleasant odor. What´s more, you can clean it under running water. Up to 15 h of humidification. The humidifier has a 3-liter water tank, which reduces the frequency of refilling. As a result, it works for up to 15 h on a single fill. What´s more, you don´t have to remove it to add water. You will refill its level through the dome display on top. On the other hand, the LED display will provide you with information about the amount of water and will automatically stop operation when the tank is empty. Quiet operation. Smartmi Rainforest Humidifier works extremely quietly - its noise level is ≤50 dB(A), so you don´t have to worry about annoying noise. What´s more, the relaxing sound will let you calm down, making it perfect for the bedroom. Customize its operation to suit your needs. The humidifier offers 3 modes of operation, so it will meet different user expectations. In Auto mode, the device will automatically adjust the intensity of humidification to ambient conditions, while Max mode will quickly and efficiently humidify the air. The Sleeping mode, on the other hand, will allow you to relax before going to bed. Self-cleaning mode. For even more convenience, the device has a self-cleaning mode, which you will enable from the Smartmi Link app. This will clean the device of sediment and debris on the walls of the tank. No more getting your hands dirty, just a few clicks in the app. Remote control. The device works with Smartmi Link and Apple HomeKit apps, so you can control it remotely. In addition, the humidifier is compatible with Amazon Alexa and Google Assistant - so a simple voice command is all you need to turn on the device or ѕelect the mode. Included: Smart evaporative humidifier Adapter User manual Rated power: 7 W Water tank capacity: 3 L Humidification capacity: 200 ml/h Relative humidity: Not more than 80% (at 25 °C) Noise: ≤50 dB(A)

SMDV C adapter A1, A10, V1 ja AD100pro jaoks SMDV C adapter on universaalne adapter, mis võimaldab kasutada Profoto ja Godoxi ümmarguse peaga välklampe koos Speedbox-Flip softboksiga. Adapter kinnitatakse esmalt magnetilise mehhanismiga ja seejärel lukustatakse kindlalt lisakinnitusega. Omadused: Ühildub: Profoto A1, A10, Godox V1Pro,Godox V100, Godox AD100pro Tugev ja turvaline kinnitus Mõõtmed: 115 × 92 × 40 mm Komplektis: ✔ 1 × SMDV C adapter

Reflects light smoothly The SMDV Flip Bansa Reflector 1480 x 625 mm gently reflects light and allows you to soften facial lines and wrinkles to create an even skin texture. Highlights Solutions for beautiful light Flip technology Three-colour diffusers with press stud Solutions for beautiful light Light is gently reflected by Flip bansa and appears even more beautiful when it hits the subject. Three-colour diffusers The silver diffuser brings out the natural colours of the subject. The white diffuser reflects much softer light than silver and has less reflected light. The gold diffuser is subtly reflected and creates a warm atmosphere. The diffusers are easy to attach and detach with a press stud. Flip technology The Flip Bansa Reflector features flip technology which allows you to easily fold and unfold it in just 1 second. Independently developed by SMDV, this technology is advanced and sturdy. FJ-Pro ball head The FJ-Pro ball head is made for the Flip Bansa reflector. It can rotate 360 degrees making it conveniently adjustаble to any angle and you have freedom of movement in any direction. When installing the flip reflector, loosen and tighten the mounting screw at the top. Characteristics Dimensions: 1480 x 625mm Flip technology Three colour diffusers Ball head 360º rotatаble In the box 1 x SMDV Flip Bansa Reflector 1480 x 625mm 1 x White & gold diffuser 1 x FJ-Pro ball head 1 x SM-03 tripod 1 x Carrying bag

SMDV G1 adapter Godox AD300PRO ja ML60 jaoks SMDV G1 adapter on vajalik Godoxi valguse kinnitamiseks Speedbox-Flip softboksi külge. Komplektis: ✔ 1 × SMDV G1 adapter

MDV S adapter võimaldab kasutada erinevaid Speedlight välklampe koos SMDV Speedbox-Flip softboksiga. Lihtsalt kinnita adapter softboksi külge ja alusta pildistamist! Omadused: ✔ Sobib kõigile Speedlight välklampidele ✔ Lihtne ja kiire kinnitamine Komplektis: ✔ 1 × SMDV S adapter

SMDV Speedbox Flip 24 kärg – Speedbox Flip 24 jaoks SMDV Speed-Flip kärg on spetsiaalselt loodud SMDV Speedbox Flip-24 softboksi jaoks. Kärg mõjutab valguse heleduse taset, valgusvihu kuju ja intensiivsust. See tagab loomulikud kontrastid, sujuvamad varjude üleminekud ja parema värviküllastuse. Komplektis: • 1 × SMDV Speedbox-Flip kärg Flip 24 jaoks • 1 × Kott See toode sobib kokku nende toodetega: SMDV Speedbox Flip-24 softbox SMDV Speedbox Flip-24G softbox SMDV Speedbox Flip-24R softbox

SMDV Speedbox-Flip Grid for Flip 20. The SMDV Speed-Flip Grid is suitable for the SMDV Speedbox Flip-20 softbox. Control the light distribution and bring more contrast in your photos.

The SMDV Grid for Speedbox Flip-36 is custom made for the SMDV Speedbox Flip-36 softbox. The grid is easily attached to the Speedbox with Velcro. The grid influences the brightness, the luminosity and the shape of the light beam of your lamp.

The SMDV Speedbox Flip-20 softbox is an extremely quick to set up, octagonal softbox. The Flip-20 has a diameter of 45 centimeters and is equipped with a practical folding system, so you can quickly unfold and fold it. It comes in a handy carrying case. Two diffusers With the SMDV Speedbox Flip-20 softbox you can create beautiful, even light in your studio or on location. The softbox is ideal for portrait, beauty and fashion photographers. Two diffusers are included: an inner and a front diffuser. These two diffusers are fixed and cannot be removed. Quick to use After you have used the softbox, you do not have to take it apart again. Quickly fold it to a manageable size with the handy SMDV quick-folding system and the softbox is ready for use again within twenty seconds. The SMDV Speedbox Flip-20 softbox is made of aluminum and nylon. The material is durable. The adapterring is not included! Optional Adapter Rings: SMDV S Adapter for Speedlight: Click here SMDV C Adapter for A1, A10, V1, AD100pro: Click here SMDV G Adapter for Godox AD300PRO & ML60: Click here SMDV F Adapter for Nanlite Forza 60,60B: Click here Characteristics Diameter of 45 cm Quick to fold in and out Made of durable nylon fabric Dimensions carrying bag of 48 x 18 x 4 cm Dimensions softbox of 45 x 50 x 28 cm In the box 1 x SMDV Speedbox-Flip20G

SMDV Speedbox-Flip24G – kiire ja kompaktne oktagonaalne softboks SMDV Speedbox Flip-24 softboks on eriti kiirelt paigaldatav ja kokkupandav oktagonaalne softboks, mille läbimõõt on 55 cm. Tänu praktilisele kokkupandavale mehhanismile saab softboksi kiiresti avada ja sulgeda. Komplektis on ka mugav kandekott, mis teeb transportimise lihtsaks. Kahe hajutiga ühtlane valgus SMDV Speedbox Flip-24 softboks võimaldab luua pehme ja ühtlase valguse, sobides suurepäraselt portree-, ilu- ja moefotograafiaks nii stuudios kui ka välitingimustes. Softboksil on kaks sisseehitatud hajutit: sisemine ja eesmine hajuti, mis ei ole eemaldatavad. Kiire kasutus ja vastupidav materjal Softboksi ei ole vaja iga kord lahti võtta – tänu SMDV kiire kokkupandavuse süsteemile saab selle mugavalt voltida ning uuesti kasutusvalmis seada vaid 20 sekundiga. Softboks on valmistatud vastupidavast alumiiniumist ja nailonist, mis tagab pika kasutusea. NB! Adapterrõngas ei kuulu komplekti! Saadaval olevad adapterrõngad (eraldi müügil): SMDV S Adapter kiirvälklampidele SMDV C Adapter Profoto A1, A10, V1, Godox AD100pro jaoks SMDV G Adapter Godox AD300PRO ja ML60 jaoks SMDV F Adapter Nanlite Forza 60, 60B jaoks Tehnilised andmed: Läbimõõt: 55 cm Kiirelt kokku- ja lahtivolditav mehhanism Valmistatud vastupidavast nailonist Kahe hajutiga ühtlane valgus Kandekoti mõõtmed: 54 × 18 × 5 cm Softboksi mõõtmed: 55 × 60 × 28 cm Komplektis: ✔ 1 × SMDV Speedbox-Flip24G ✔ 1 × Kandekott

The SMDV Speedbox Flip-28G is a very quick to set-up, octagonal softbox. The Flip-28G has a diameter of 70 centimeters and features a practical folding system. This gives you the opportunity to unfold and fold it in no time. It comes in a handy carrying bag. Diffuser The SMDV Speedbox Flip-28G softbox creates beautiful, even light in your studio or on location. The softbox is ideal for portrait, beauty and fashion photographers. It is equipped with a fixed diffuser. Get started quickly After using the softbox, there´s no need to take it apart again. Quickly fold it to a manageable size with the convenient SMDV quick-fold system and within 20 seconds the softbox is ready for use again. Durable The SMDV Speedbox Flip-28G softbox is made of aluminium and nylon. The material is wear-resistant. The adapter ring is not included. Optional Adapter Rings: SMDV S Adapter for Speedlight. Write us & ask about it! SMDV C Adapter for A1, A10, V1, AD100pro. Write us & ask about it! SMDV G Adapter for Godox AD300PRO & ML60. Write us & ask about it! SMDV F Adapter for Nanlite Forza 60,60B. Write us & ask about it! Characteristics Diameter of 70 centimetres Fold in and out quickly Made of wear resistant nylon fabric Dimensions softbox of 70 x 59 x 34 centimetres With fixed diffuser In the box 1 x SMDV Speedbox-Flip28G 1 x Carrying bag

The SMDV Speedbox Flip-36 is a very quick to set-up, octagonal softbox. The Flip-36 has a diameter of 90 centimeters and features a practical folding system. This gives you the opportunity to unfold and fold it in no time. It comes in a handy carrying bag. Diffuser. The SMDV Speedbox Flip-36 softbox creates beautiful, even light in your studio or on location. The softbox is ideal for portrait, beauty and fashion photographers. It is equipped with a fixed diffuser. Get started quickly. After using the softbox, there´s no need to take it apart again. Quickly fold it to a manageable size with the convenient SMDV quick-fold system and within 20 seconds the softbox is ready for use again. Durable. The SMDV Speedbox Flip-36 softbox is made of aluminium and nylon. The material is wear-resistant.

The SMDV Speedring Bowens is an adapter with which you can mount your Speedbox to a studio flash head with a Bowens mount.

This SMDV Speedring Godox is used to quickly and easily attach SMDV light shapers to a Godox AD300 or AD300 Pro flash head.

The Godox Softbox Bowens Mount + grid 30x120cm is a softbox that is equipped with a Bowens mount, so you can use the softbox with any studio flash with a Bowens mount. A softbox spreads the light in a nice, even way. In this way, all kinds of subjects can be captured without a hard drop shadow. A grid is used to control the scattering of the light. This can be especially helpful in smaller spaces. The soft light of the softboxes is not affected and you have more control over the direction of the light. The fabric grid has a Velcro strip on the side, making it very easy to attach the grid to the softbox. Characteristics Soft, even light without cast shadows Can be used with any studio flash with Bowens mount Grid for directing light and less light scattering Velcro strip on the side of the grid Set contains: GODOX SB-FW30120 softbox with the necessary accessories external diffuser internal diffuser case grid original packaging

Softbox GODOX SB-FW120 grid 120cm octa. GODOX SB-FW series is a family of high quality softboxes with removable grid (included) and Bowens fixing. The GODOX series SB-FW softbox gives better control over the light beam and the pictures are more contrasting, although the softness of lighting characteristic of softboxes is still present. The construction of the softbox is based on a metal ring, which quick and easily fastens elastic rods, responsible for the strong and even skin tightening The plating is made of a rip-stop nylon fabric thanks to which softboxes are very resistant to mechanical damage, and at the same time very light. The interior is covered with a silvery, neutral color reflective layer. In addition to the main scattering layer, the softbox is equipped with an additional internal diffuser, made of white material with a high coefficient of light scattering. At the front of the softbox there is a collar for mounting the honeycomb (included). The Softbox is equipped with a Bowens mounting ring. It can be used with products from other brands using the same mounting.

Softbox GODOX SB-FW140 grid 140cm octa. GODOX SB-FW series is a family of high quality softboxes with removable grid (included) and Bowens fixing. The GODOX series SB-FW softbox gives better control over the light beam and the pictures are more contrasting, although the softness of lighting characteristic of softboxes is still present. The construction of the softbox is based on a metal ring, which quick and easily fastens elastic rods, responsible for the strong and even skin tightening The plating is made of a rip-stop nylon fabric thanks to which softboxes are very resistant to mechanical damage, and at the same time very light. The interior is covered with a silvery, neutral color reflective layer. In addition to the main scattering layer, the softbox is equipped with an additional internal diffuser, made of white material with a high coefficient of light scattering. At the front of the softbox there is a collar for mounting the honeycomb (included). The Softbox is equipped with a Bowens mounting ring. It can be used with products from other brands using the same mounting.

The GODOX series SB-FW softbox gives better control over the light beam and the pictures are more contrasting, although the softness of lighting characteristic of softboxes is still present. The construction of the softbox is based on a metal ring, responsible for the strong and even skin tightening The plating is made of a rip-stop nylon fabric thanks to which softboxes are very resistant to mechanical damage, and at the same time very light. The interior is covered with a silvery, neutral color reflective layer. In addition to the main scattering layer, the softbox is equipped with an additional internal diffuser, made of white material with a high coefficient of light scattering. At the front of the softbox there is a collar for mounting the honeycomb (included). The Softbox is equipped with a Bowens mounting ring. It can be used with products from other brands using the same mounting. Set contains: GODOX SB-FW2290 softbox with the necessary accessories external diffuser internal diffuser case grid original packaging

Softbox GODOX SB-FW35160 grid 35x160cm strip.The GODOX series SB-FW softbox gives better control over the light beam and the pictures are more contrasting, although the softness of lighting characteristic of softboxes is still present. The construction of the softbox is based on a metal ring, which quick and easily fastens elastic rods, responsible for the strong and even skin tightening The plating is made of a rip-stop nylon fabric thanks to which softboxes are very resistant to mechanical damage, and at the same time very light. The interior is covered with a silvery, neutral color reflective layer. In addition to the main scattering layer, the softbox is equipped with an additional internal diffuser, made of white material with a high coefficient of light scattering. At the front of the softbox there is a collar for mounting the honeycomb (included). The Softbox is equipped with a Bowens mounting ring. It can be used with products from other brands using the same mounting. Set contains: GODOX SB-FW35160 softbox with the necessary accessories external diffuser internal diffuser case grid original packaging

GODOX SB-FW series is a family of high quality softboxes with removable grid (included) and Bowens fixing. The GODOX series SB-FW softbox gives better control over the light beam and the pictures are more contrasting, although the softness of lighting characteristic of softboxes is still present. The construction of the softbox is based on a metal ring, responsible for the strong and even skin tightening. The plating is made of a rip-stop nylon fabric thanks to which softboxes are very resistant to mechanical damage, and at the same time very light. The interior is covered with a silvery, neutral color reflective layer. In addition to the main scattering layer, the softbox is equipped with an additional internal diffuser, made of white material with a high coefficient of light scattering. At the front of the softbox there is a collar for mounting the honeycomb (included). The Softbox is equipped with a Bowens mounting ring. It can be used with products from other brands using the same mounting. Set contains: GODOX SB-FW6090 softbox with the necessary accessories external diffuser internal diffuser case grid original packaging

Softbox GODOX SB-FW95 grid 95cm octa. GODOX SB-FW series is a family of high quality softboxes with removable grid (included) and Bowens fixing. The GODOX series SB-FW softbox gives better control over the light beam and the pictures are more contrasting, although the softness of lighting characteristic of softboxes is still present. The construction of the softbox is based on a metal ring, which quick and easily fastens elastic rods, responsible for the strong and even skin tightening The plating is made of a rip-stop nylon fabric thanks to which softboxes are very resistant to mechanical damage, and at the same time very light. The interior is covered with a silvery, neutral color reflective layer. In addition to the main scattering layer, the softbox is equipped with an additional internal diffuser, made of white material with a high coefficient of light scattering. At the front of the softbox there is a collar for mounting the honeycomb (included). The Softbox is equipped with a Bowens mounting ring. It can be used with products from other brands using the same mounting.

Softbox GODOX SB-GUBW6090 umbrella grid 60x90cm rectangular. GODOX SB-UBW series is a family of softboxes stands out by their short folding and unfolding time. It is a light modifier that will be useful for people who often change their workplace and perform their sessions under time pressure or have little space for storage. Mounted on a tripod by a typical umbrella handle. The GODOX series SB-GUBW softbox not only saves valuable time, but also makes it easier to work on the set. This is possible thanks to the frame, which uses the principle of the umbrella. The plating fabric is stretched and held in tension by a structure whose rods are made of elastic steel. Mounted to a tripod with a lamp in a very comfortable way, like an umbrella. If necessary, the softbox can be folded and stored in the case in a few seconds. The plating is made of a rip-stop nylon fabric, softboxes are very resistant to mechanical damage, and at the same time very light. The interior is finished with a silver screen that evenly distributes the light on the diffuser. In the front part there is a collar used to mount the honeycomb (included). In the bottom part of the softbox there is a zip closing the hole through which the tripod protruding. Set contains: GODOX SB-GUBW6090 softbox with the necessary accessories external diffuser case grid original packaging

Softbox GODOX SB-GUBW9090 umbrella grid 90x90cm squarer. GODOX SB-UBW series is a family of softboxes stands out by their short folding and unfolding time. It is a light modifier that will be useful for people who often change their workplace and perform their sessions under time pressure or have little space for storage. Mounted on a tripod by a typical umbrella handle. The GODOX series SB-GUBW softbox not only saves valuable time, but also makes it easier to work on the set. This is possible thanks to the frame, which uses the principle of the umbrella. The plating fabric is stretched and held in tension by a structure whose rods are made of elastic steel. Mounted to a tripod with a lamp in a very comfortable way, like an umbrella. If necessary, the softbox can be folded and stored in the case in a few seconds. The plating is made of a rip-stop nylon fabric, softboxes are very resistant to mechanical damage, and at the same time very light. The interior is finished with a silver screen that evenly distributes the light on the diffuser. In the front part there is a collar used to mount the honeycomb (included). In the bottom part of the softbox there is a zip closing the hole through which the tripod protruding. Set contains: GODOX SB-GUBW9090 softbox with the necessary accessories external diffuser case grid original packaging