FOTOakadeemia

Poster hangers that are a simple and neat way to hang posters and pictures. With this Poster hanger you can easily attach the picture between the wooden moldings using the magnets. It comes with a matching leather strap that you can easily tie into the supplied loops. First screw the loops into the moulding, then attach the leather strap. It is enough with a simple knot but make sure it is tight enough so it does not detach. Available in several lengths to fit everything from A4 to 70×100 Colour: White Material: Wood (Yellow poplar). No of magnets: up to 41 cm- 2 magnets, 51 cm and up – 3 magnets

Power Battery Pack MB-N11 for Z 7II and Z 6II boasts a shutter-release button and controls for vertical shooting. It also features a USB-C port allowing the charge of two batteries consecutively when disconnected from the camera. For the portrait shooter who needs to shoot vertically, the landscape photographer recording lengthy time-lapse sequences and the sports photographer desiring a more balanced feel while using long lenses, the MB-N11 is the ideal accessory. Designed specifically for the Nikon Z 7II and Z 6II mirrorless cameras, the MB-N11 is a Multi-Power Battery Pack with vertical shutter button, main and sub command dials, AF-ON button, sub ѕelector and Fn buttons. Plus, when using two EN-EL 15c batteries, the Power Battery Pack MB-N11 provides 1.9x (CIPA standard). Increase in battery performance over an EN-EL 15c battery in the camera alone. And the batteries are hot-swappable, meaning you won’t have to stop shooting or recording to swap batteries! The Power Battery Pack MB-N11 also features an improved grip and dust and drip protection like that of the rest of the Z series cameras. In addition to powering the camera, the MB-N11 features a USB-C connection which means you can power the batteries from a portable charger or AC power supply, even while connected to a computer. Or charge the batteries within the grip via USB when you’re not using the camera. The Power Battery Pack MB-N11 is powered by two EN-EL 15 series rechargeable Li-ion batteries and can accept EN-EL 15, EN-EL 15a, EN-EL 15b and EN-EL 15c batteries. While the most performance increase will be seen using two EN-EL 15c batteries, you can use any combination of the batteries to power the unit. You can even use the MB-N11 with only one battery inserted—in either chamber A or B. When the battery in chamber A is exhausted, the camera will switch to the battery in chamber B. The hot-swap system allows for replacement of the battery closest to the door (battery A) with no interru

The MB-N12 is a dust- and drip-resistant battery grip that can be used for vertical shooting, as well as to increase shooting time versus using the camera battery alone. It’s also a great way to counterbalance the weight of telephoto lenses.

The MB-N14 is a dust- and drip-resistant battery grip that can be used for vertical shooting, as well as to increase shooting time versus using the camera battery alone. It’s also a great way to counterbalance the weight of telephoto lenses.

The EP-6 is a power supply connector that is required for use when using the EH-6b AC Adapter.

The Baseus StarLord powerbank is an indispensable power source with an impressive 30000mAh capacity, providing multiple charges for your devices on the go, at work or on outings. This stylish powerbank allows you to charge multiple devices at the same time thanks to support for fast charging and multiple ports. Its smart design and innovative charging technology, guarantees efficient and safe use. Baseus Star-Lord powerbank is not only a convenience, but also a guarantee of safety. See what it can offer you! Powerbank Baseus Star-Lord is an indispensable source of energy for active people who value large capacity and convenience. With a huge capacity of 30000 mAh, this powerbank allows you to charge your devices multiple times, whether you´re on the go, at work or on a weekend getaway. Its impressive capacity means you can enjoy prolonged use of your smartphones, tablets or headphones without having to constantly look for an outlet. The Baseus Star-Lord powerbank is not only a practical device, but also a stylish accent that fits perfectly into a variety of situations. It ensures that you will always have a supply of energy for your devices, no matter where you are. The Baseus Star-Lord powerbank is the solution for those in need of a versatile and efficient power source. With support for fast charging and several available ports, this powerbank allows you to charge multiple devices simultaneously, making it the perfect companion for travel, work or everyday use. Its wide compatibility with various charging standards, such as Huawei SPC/FCP, Apple PD, Xiaomi QC, Samsung AFC and many others, ensures full flexibility and customization to suit your needs. Now you can charge your devices according to your preferences, gaining confidence that they are powered efficiently and safely. The Baseus Star-Lord powerbank not only impresses with its aesthetically pleasing design, but also with smart solutions that enhance its usability. Equipped with a display indicating the remaining amount of energy, it allows you to easily control the available power. But that´s not all – the innovative BPSII charging technology, makes this powerbank unique. With dynamic power distribution tailored to the charging devices, it automatically adjusts the output current, voltage and power to each connected device. The Baseus Star-Lord powerbank is not only a source of energy, but also a guarantee of safety for your devices. It is equipped with protection against overcharging, over-discharge, over-voltage and over-current protection, among others. This ensures that your devices are safe, and you can charge them quickly and easily.

The Baselight x series is a truly portаble lighting system. The lightweight yet robust construction is designed to withstand extreme conditions and strong winds. With a manual mast system the x series has a focus on simplicity and comes in three different versions: 320x, 420x and 600x. The main difference is lumen output and power consumption. Applications: Construction & Rentals, Railway, Disaster response & Rescue and Military The Baselight 320x Battery eliminates the need for power cables thanks to the all-in-one design. With a battery that holds 936 Wh the light tower is able to deliver 45 000 lumen for 2,5 hours, or 8 hours at 18 000 lumen. The detachable solar panels designed for the 320x Battery allows you to create a truly sustainable area lighting solution, using nothing but 100% renewable energy. The Baselight X series of LED light towers is tailored towards professionals who are used to working with technical equipment on a daily basis. The X series relies on a manual mast system in combination with the ultra efficient LED armature and the “all in one” tripod platform. Applications: Construction & Rentals, Railway, Disaster response & Rescue and Military Lumen: 45000 Weight: 41 kg Fully extended height: 4,4 m Watt: 320 Height: 1.2-4.3m Light Spread: 180°-360° Lighting Area: 4.600m2 Consumption: 350W Voltage: 110/230VAC Dimensions (Closed): 120cm(H) x 32cm(W) x 40cm(D) Dimensions (Deployed): 4.4m(H) x 2.2m(W) x 2.2m(D) Battery 936 Wh included Smart Control: yes Wind resistance (without ballast): up to 20 m/s Wind resistance (with ballast): up to 30 m/s Color temperature: 6000K (bright light) IP Rating: IP65 (main unit) Transport dimension: 1200mm x 320mm x 400mm Certification: PSE / CE / BIS Warranty: 1 year

How versatile and easy can gluing be? The Pritt Refill Glue Roller are refillable. It glues paper and cardboard on even surfaces – for example photos in an album. One refill (14m) glues up to 230 photos!

The Most Affordable Camera Crane! Capture Smooth, Dynamic Shots With High-Quality Astra Jib! PROFESSIONAL QUALITY. LIGHTWEIGHT. DURABLE. Proaim Astra Camera Jib is so light and versatile that you´ll want to make it an immediate part of your standard equipment set. Whether you´re shooting wedding videos in a church, commercials on location, music videos in your studio or sporting events in a stadium. Made of High-grade materials, the design is durable and entirely tool-less, therefore, has a speedy setup time. Single Rail Design achieves a lightweight crane assembled by one person. It is complemented and made stable by a second rail that accomplishes the tilt function. Pan your camera 360° to take in a massive vista, then crane down to move your audience into the perfect shots.

Lexar Professional Workflow SD/microSD UHS-II Card Reader, with a microSD and an SD card slot, offloads two cards simultaneously for workflow. Lexar Professional Workflow SD/microSD UHS-II Card Reader, with a microSD and an SD card slot, offloads two cards simultaneously for workflow. With a microSD and an SD card slot, the Professional Workflow SD/microSD UHS-II Card Reader lets you offload two cards simultaneously for an expedited workflow. The Professional Workflow SD/microSD UHS-II Card Reader lets you offload two cards simultaneously for an expedited workflow. It delivers up to 312MB/s transfer speed (per slot), features a special scratch-resistant aluminum finish, and includes a USB-C to USB-C cable and a USB-A adapter. It also comes with a worry-free 3-year warranty. SD and microSD card slots let you transfer content from two cameras or devices simultaneously Delivers up to 312MB/s transfer speed (per slot) and both slots can work simultaneously for maximum efficiency Stronger yet lighter: the special aluminum finish offers better scratch-resistance Compatible with Lexar Professional Workflow and Workflow Go which lets you customize readers and portable SSDs for maximum efficiency Includes a USB-C to USB-C cable and a USB-A adapter and it is ready to go right out of the box, without any extra peripherals. 3-year warranty for your peace of mind

Profoto B30 on uus standard professionaalidele, kes vajavad usaldusväärset ja paindlikku valguslahendust nii stuudios kui ka välitingimustes. See on kergesti kaasaskantav, kummeeritud pinnaga ja piisavalt tugev, et taluda ka kõige raskemaid valgusmodifikaatoreid. B30 on 13% kiirema taastusajaga kui B10X seeria, mis tähendab, et sa ei jää kunagi ilma õigest hetkest. Vahetatav välgusäde võimaldab kiiret hooldust võtteplatsil, hoides sinu töövoo sujuvana. Tänu 11-astmelisele võimsusvahemikule saad luua nii pehme täitevalguse kui ka maksimaalse valgusjõu. Kolm välgurežiimi (ECO, Boost ja Freeze) pakuvad paindlikkust – pikendatud tööiga, lisavõimsus või ülilühike välgusähvatus liikumise peatamiseks. Sisseehitatud 40 W kahevärviline LED on 50% võimsam kui B10X seerial, tehes B30 ideaalseks nii fotode kui ka videote jaoks. Profoto tuntud Light Shaping System pakub üle 120 modifikaatori ja lisatarviku, et tuua sinu loominguline visioon ellu. Intuitiivne Profoto kasutajaliides võimaldab sul keskenduda pildistamisele, mitte seadete kruttimisele. Peamised omadused: Kompaktne, kerge ja vastupidav akuvälkProfoto ECO režiim pikema eluea tagamiseksKummeeritud pind mugavaks seadistamiseks igas keskkonnasVahetatav välgusäde – kiire hooldus võtteplatsil11-astmeline võimsusvahemikKolm välgurežiimi: ECO, Boost, FreezeVõimas 40 W LED pidevvalgus reguleeritava heleduse ja värvustemperatuurigaÜhilduv üle 120 Profoto valgusmodifikaatoriga (sh RFi-sari)AirX juhtmevaba sünkroonimine ja juhtimined: Profoto B30 on loodud fotograafidele, kes hindavad kiirust, usaldusväärsust ja täpsust. See on ideaalne valik nii portreefotograafidele, pulmafotograafidele kui ka loovstuudiotele, kes soovivad ühes seadmes kvaliteetset välku ja pidevvalgust.

Profoto B30 on uus standard professionaalidele, kes vajavad usaldusväärset ja paindlikku valguslahendust nii stuudios kui ka välitingimustes. See on kergesti kaasaskantav, kummeeritud pinnaga ja piisavalt tugev, et taluda ka kõige raskemaid valgusmodifikaatoreid. B30 on 13% kiirema taastusajaga kui B10X seeria, mis tähendab, et sa ei jää kunagi ilma õigest hetkest. Vahetatav välgusäde võimaldab kiiret hooldust võtteplatsil, hoides sinu töövoo sujuvana. Tänu 11-astmelisele võimsusvahemikule saad luua nii pehme täitevalguse kui ka maksimaalse valgusjõu. Kolm välgurežiimi (ECO, Boost ja Freeze) pakuvad paindlikkust – pikendatud tööiga, lisavõimsus või ülilühike välgusähvatus liikumise peatamiseks. Sisseehitatud 40 W kahevärviline LED on 50% võimsam kui B10X seerial, tehes B30 ideaalseks nii fotode kui ka videote jaoks. Profoto tuntud Light Shaping System pakub üle 120 modifikaatori ja lisatarviku, et tuua sinu loominguline visioon ellu. Intuitiivne Profoto kasutajaliides võimaldab sul keskenduda pildistamisele, mitte seadete kruttimisele. Peamised omadused: Kompaktne, kerge ja vastupidav akuvälkProfoto ECO režiim pikema eluea tagamiseksKummeeritud pind mugavaks seadistamiseks igas keskkonnasVahetatav välgusäde – kiire hooldus võtteplatsil11-astmeline võimsusvahemikKolm välgurežiimi: ECO, Boost, FreezeVõimas 40 W LED pidevvalgus reguleeritava heleduse ja värvustemperatuurigaÜhilduv üle 120 Profoto valgusmodifikaatoriga (sh RFi-sari)AirX juhtmevaba sünkroonimine ja juhtimined: Profoto B30 on loodud fotograafidele, kes hindavad kiirust, usaldusväärsust ja täpsust. See on ideaalne valik nii portreefotograafidele, pulmafotograafidele kui ka loovstuudiotele, kes soovivad ühes seadmes kvaliteetset välku ja pidevvalgust.

Profoto Connect Pro for Canon – täpne ja intuitiivne välgupäästik Profoto Connect Pro for Canon on sinu värav kogu Profoto valgussüsteemi juurde. See nutikas ja töökindel päästik pakub kuni 100 kanalit, igaüks kuue grupiga – kolm TTL-režiimiks ja kolm käsitsi juhtimiseks. See annab sulle maksimaalse kontrolli valguse üle nii stuudios kui ka võttepaigal. Suur ja selge ekraan koos intuitiivse kasutajaliidesega muudab seadistuste juhtimise lihtsaks – näed kõiki võimsusväärtusi absoluutarvudes otse ekraanilt. Profoto AirX Bluetooth-tehnoloogia tagab töökindla sünkroonimise ja kaugjuhtimise kuni 100 m ulatuses. Laetavad akud pikendavad tööaega ja automaatsed püsivara uuendused hoiavad seadme alati ajakohasena. Laadi alla Profoto Control rakendus (iPad, iPhone või Android), et hallata valgusgruppe otse nutiseadmest. Lisaks saad ühe nupuvajutusega lülituda TTL-režiimilt manuaalsele juhtimisele, säilitades automaatselt määratud TTL-seaded – ideaalne kiirete töövoogude jaoks. Miks valida Profoto Connect Pro for Canon? Intuitiivne kasutajaliides ja suur ekraan – lihtne ja kiire seadistamine100 kanalit ja 6 gruppi – paindlik valguse juhtimine igas olukorrasTTL ja manuaalrežiimid – automaatne säritus või täielik loominguline kontrollProfoto AirX Bluetooth – stabiilne sünkroonimine ja kaugjuhtimine kuni 100 mLaetavad akud ja pikk tööaeg – vähem katkestusi võttepäevalPüsivara uuendused automaatselt – alati uusimad funktsioonidProfoto Control rakenduse tugi – valgusgruppide juhtimine nutitelefonist või tahvelarvutist Tehnilised andmed Ühilduvus: Canon kaamerad (hot-shoe ühendus)Juhtimisulatus: 0,5 – 100 mKanalid / grupid: 100 kanalit, 6 gruppi kanali kohta (3 TTL + 3 manuaal)Ühendus: Profoto AirX BluetoothToide: laetavad akud Profoto Connect Pro on professionaalne TTL-päästik, mis annab sulle täieliku kontrolli valguse üle ja võimaldab töötada kiiremini, nutikamalt ja suurema täpsusega.

Profoto OCF Magnum Reflector – maksimaalne valguse võimsus igas asukohas Profoto OCF Magnum Reflector on loodud selleks, et tuua esile maksimaalne valgusjõud Profoto lamedate esiklaasidega välkudest. See on ideaalne valik B1X, B2, D1, D2 ja varasema B1 välgu kasutajatele, kes soovivad võttepaikadel valgust visata pikematele vahemaadele ja säilitada kontrolli loomuliku valguse üle. Tänu kompaktsele ja kergesti kaasaskantavale disainile on see suurepärane alternatiiv standardsele Magnum reflektorile, pakkudes samas pea 2 f-stoppi rohkem efektiivset valgusjõudu. See tähendab, et saad pildistada isegi eredates valgusoludes, ilma et sinu välgu valgus kaoks. OCF Magnum Reflectoril on lai zoomi funktsioon, mis võimaldab valguse suunda ja laiusnurka reguleerida, lihtsalt liigutades reflektorit edasi-tagasi välgu peal. Valguse jaotus on ühtlane, pehme üleminekuga ja reguleeritava valgusnurgaga (40°–80°). Miks valida Profoto OCF Magnum Reflector? Kompaktne ja kerge – mugav transportida võttepaikade vahel Suurendab valgusjõudu kuni 2 f-stoppi – ideaalne pika vahemaa valgustamiseks Ühtlane valgus ja sujuv üleminek – professionaalne tulemus igal pildil Zoom-funktsioon – reguleeri valguse hajuvust liigutades reflektorit Reguleeritav valgusnurk 40°–80° – paindlik valguse kujundamine Kaitsekott komplektis – lihtne hoiustada ja kinnitada Profoto kottide külge NB! Sobib kasutamiseks ainult Profoto lameda esiklaasiga välkudega (B1X, B2, D1, D2, B1). Max 1000Ws välk, max 300W modelleerimisvalgus. Ei sobi kasutamiseks ProHead, Pro-B Head, Acute/D4 Head ega AcuteB Head peadega. Tehnilised andmed Valgusnurk: 40°–80° Efektiivne valgusvõimendus: kuni +2 f-stoppi Maksimaalne välguvõimsus: 1000 Ws Komplektis: OCF Magnum Reflector, kaitsekott Profoto OCF Magnum Reflector on professionaalse fotograafi tööriist, kes vajab võimsat, kuid kaasaskantavat valguslahendust, et kujundada valgust täpselt nii, nagu looming nõuab.

Profoto OCF Softbox 1×3´ (~30 x 90 cm)– kompaktne ja täpne valguse suunaja Profoto OCF Softbox 1×3´ on ideaalne valik fotograafidele, kes vajavad pehmet ja suunatud valgust võttepaikadel. See kitsas ristkülikukujuline softbox on loodud spetsiaalselt kasutamiseks Profoto akuvälkudega (B1X, B2 ja varasem B1), pakkudes kiiret ja mugavat seadistamist. Tänu kergele ja vastupidavale materjalile on OCF Softbox lihtne kokku panna ja transportida. Värvikoodiga varraste ning integreeritud difuusoriga seadistus käib kiirelt – ideaalne lahendus liikuvatele fotograafidele. Miks valida Profoto OCF Softbox 1×3´? NB! Kasutamiseks on vaja OCF Speedringi (müügil eraldi). Softboxi ei soovitata kasutada Profoto D1 ja D2 monoblokkidega või standardpeadega. Tehnilised andmed

Profoto OCF Softbox 2´ Octa (61 cm) – loomulik valgus portreede jaoks. Profoto OCF Softbox 2´ Octa on kompaktne kaheksanurkne softbox, mis loob pehme ja kauni valguse – ideaalne portreefotograafidele ja sisuloojatele, kes soovivad loomulikku ja ühtlast valgust. Tänu oma ümmargusele kujule tekitab see kauni ja loomuliku silmatäpi (catchlight), mis annab portreedele elavuse ja sügavuse. Valmistatud kergest ja vastupidavast materjalist, mis on kiirelt avatav ja kokkupandav. Värvikoodiga vardad ja integreeritud difuusor tagavad kiire seadistuse võtteplatsil. See teeb OCF Softbox 2´ Octa-st ideaalse kaaslase neile, kes liiguvad sageli erinevate pildistamispaikade vahel. Miks valida Profoto OCF Softbox 2´ Octa? Pehme ja ühtlane valgus – ideaalne portreefotode, moefotode ja toidufotode jaoks Loomulik ümmargune valguspeegeldus silmades – muudab portreed elavamaks Kompaktne ja kerge – mahub kergesti valgustuskotti Lihtne ja kiire ülesseadmine – värvikoodiga vardad ja kiirkinnitus Kvaliteetsed kangad – tagavad ühtlase valguse ja pika eluea Võimalus lisada softgrid (müügil eraldi) täpseks valguse kontrolliks NB! Kasutamiseks on vaja OCF Speedringi (müügil eraldi). Ei sobi kasutamiseks Profoto D1 ja D2 monoblokkidega ega standardpeadega. Tehnilised andmed Kuju: kaheksanurkne (Octa) Läbimõõt: 2´ (~60 cm) Komplektis: softbox, difuusor, märgistatud kandekott Profoto OCF Softbox 2´ Octa on loodud professionaalidele, kes hindavad kiiret töövoogu, pehmet valgust ja loomulikku tulemust – olgu tegemist stuudioportree või võttega kohapeal.

PROFOTO OCF Speedring – softboxi ja beauty dishi kinnitus Profoto OCF Speedring on loodud spetsiaalselt OCF Softboxide ja OCF Beauty Dishide kinnitamiseks Profoto Off-Camera Flash välkudele. See ei ole tavaline speedring – see on kompaktne, kerge ja vastupidav, sobides igapäevaseks kasutamiseks nii stuudios kui ka välivõtetel. Patenteeritud disain võimaldab softboxi või beauty dishi paigaldada kiiresti ja lihtsalt, ilma et peaksid vaevlema varraste painutamisega. Värvikoodidega augud juhatavad täpselt, kuidas valgusmodifikaator õigesti kokku panna. Klassikaline Profoto kummist kinnitus võimaldab speedringi ja softboxi pöörata 360° ulatuses, et saavutada täiuslik valguse suund igas olukorras. See muudab töövoo sujuvamaks ja annab rohkem loovust pildistamisel. Peamised omadused Miks valida Profoto OCF Speedring? See speedring on parim lahendus fotograafile, kes soovib oma Profoto OCF välgu valguskujundusvõimalusi laiendada. See on töökindel, kiire paigaldada ja annab sulle täieliku kontrolli valguse suuna ja kvaliteedi üle.

Projector Mount for Forza 60 and 60B LED Monolights from Nanlite is an ideal accessory for controlling the Forza´s output for theatrical effects, hair lighting, and ѕelective lighting of your subject, via its non-curved lenses that eliminate aberration and minimize distortion, while rendering a tight 19-degree beam spread. Advanced features include etched interior walls to prevent edge dispersion and fringing, and a nylon-coated housing that allows easy handling after shooting. The Projector has internal shutters for light shaping, and includes a gobo holder with four B-size gobos, a gel frame and a case. Optional accessories include an 18-bladed iris. Expertly Crafted Details Nanlite has gone to great lengths to ensure the light quality emitted by the Forza 60/60B Projector Mount. It utilizes non-curved lenses to eliminate aberration and minimize distortion, while optical metallic-membrane plating increases luminousness and color temperature accuracy. Finally, the internal walls of the housing are etched to reduce edge dispersion and fringing. Extra Durability and Heat Dispersion The Forza 60/60B Projector Mount´s housing keeps heat absorption to a minimum through the use of nylon coated metal. Users can easily handle the projector after use, and the nylon design also keeps the fixture lightweight but still robust enough for travel. Control, Shape, and Layer Your Light For maximum flexibility in light shaping and control, the Forza 60/60B Projector Mount features internal shutters and include four B-Size Gobos, a gobo frame, and a gel frame. For even further control of the light´s size and shape, an 18-bladed iris is available separately. Sturdy Protective Case Every Forza 60/60B Projector Mount ships in a purpose-built protective case created to stand up to the rigors of traveling to and from the set. It ensures your optics stay safe while still leaving space for additional accessories. Key Features: 19-Degree Beam Spread For Dramatic, Theatrical Effects Ideal Accent

Kvaliteet kohtub soodsa hinnaga kompaktses ja kergekaalulises keres • Õhuke kere mugava käepidemega • Mitmekihiliselt vääristatud läätsed ja kõrgpeegeldusega prisma vääristus tagamaks pildi teravuse ja valgusjõulisuse • Kõrgpeegeldusega hõbesulamist peegelvääristusega prismad muudavad pildi kirkamaks • Kummist ümbris põrutuskindluse ja mugava haarde tagamiseks • Ökoklaasist optika – plii- ja arseenivaba – kõigis läätsedes ja prsimades • Suur silma kaugus okulaarist võimaldab selget vaateala ka prillikandjatele • Pööratavad kummist silmapadjad lihtsaks positsioneerimiseks • Väga kompaktne ja kergekaaluline • Veekindel kuni 1 meeter 10 minutiks • Uduvaba

Üks kergemaid binokleid oma klassis. Täies ulatuses mitmekihilise kattega läätsed tagavad kujutise ereduse ja terava, selge pildi. Kõik läätsed ja prismad on tehtud Nikoni ökoklaasist, mis on plii- ja arseenivaba. Klaaskiuga tugevdatud polükarbonaadist korpus on väga vastupidav, vee- ja udukindel. Kummiümbris suurendab löögikindlust ning tagab kindla ja mugava haarde. Mitme klõpsuga reguleeritavate kummist okulaaridega on lihtne silmi keskpunkti suhtes õigesti paigutada. Suur vaatekaugus muudab selge ja laia vaatevälja nautimise mugavaks ka prille kandva kasutaja jaoks.

Üks kergemaid binokleid oma klassis. Täies ulatuses mitmekihilise kattega läätsed tagavad kujutise ereduse ja terava, selge pildi. Kõik läätsed ja prismad on tehtud Nikoni ökoklaasist, mis on plii- ja arseenivaba. Klaaskiuga tugevdatud polükarbonaadist korpus on väga vastupidav, vee- ja udukindel. Kummiümbris suurendab löögikindlust ning tagab kindla ja mugava haarde. Mitme klõpsuga reguleeritavate kummist okulaaridega on lihtne silmi keskpunkti suhtes õigesti paigutada. Suur vaatekaugus muudab selge ja laia vaatevälja nautimise mugavaks ka prille kandva kasutaja jaoks.

PROSTAFF 5 Fieldscope väliteleskoobid on Nikoni Fieldscope mudeliseeria sissejuhatavad mudelid ja RA III mudeliseeria järglased. PROSTAFF 5 Fieldscope väliteleskoopide korpused on umbes 20% kergemad kui olemasolevad RA III. Uus suumimisfunktsiooniga okulaarilääts vähendab kromaatilist aberratsiooni vaatevälja servades ja pakub vaatlemismugavuse tagamiseks suurt silma kaugust okulaarist. Kolme liiki okulaariläätsed, mis ühilduvad digitaalse suurenduse funktsiooniga ja mida saab ühendada mitmesuguste COOLPIX mudeliseeria kompaktsete digitaalkaameratega FSB seeria digikaamera hoidiku abil.

PROSTAFF 5 Fieldscope väliteleskoobid on Nikoni Fieldscope mudeliseeria sissejuhatavad mudelid ja RA III mudeliseeria järglased. PROSTAFF 5 Fieldscope väliteleskoopide korpused on umbes 20% kergemad kui olemasolevad RA III. Uus suumimisfunktsiooniga okulaarilääts vähendab kromaatilist aberratsiooni vaatevälja servades ja pakub vaatlemismugavuse tagamiseks suurt silma kaugust okulaarist. Kolme liiki okulaariläätsed, mis ühilduvad digitaalse suurenduse funktsiooniga ja mida saab ühendada mitmesuguste COOLPIX mudeliseeria kompaktsete digitaalkaameratega FSB seeria digikaamera hoidiku abil.

Spetsiaalne okulaar Nikon PROSTAFF 5 Fieldscope väliteleskoopidele. Kinnitamise ja vabastamise lihtsuse tagab lukuga bajonettpaigaldus. Täieliku mitmekihilise kattega Veekindlus Suur silma kaugus okulaarist Uued pööra-ja-lükka mehhanismiga pildiotsija katted – digitaalseks suurendamiseks, kui kate on sisse tõmmatud, ning reguleeritavaks silma kauguseks, kui see on välja tõmmatud.

Spetsiaalne okulaar Nikon PROSTAFF 5 Fieldscope väliteleskoopidele. Kinnitamise ja vabastamise lihtsuse tagab lukuga bajonettpaigaldus. Täieliku mitmekihilise kattega Veekindlus Suur silma kaugus okulaarist Uued pööra-ja-lükka mehhanismiga pildiotsija katted – digitaalseks suurendamiseks, kui kate on sisse tõmmatud, ning reguleeritavaks silma kauguseks, kui see on välja tõmmatud.

Kõrge kvaliteetiga sooritus stiilse kere sees • Kõik läätsed ja prsimad on mitmekihiliselt vääristatud valgusjõulise pildi tagamiseks • Faasikorrektsioon-vääristusega roof ehk üksteisega kattuvad prsimad kõrge resolutsiooni tagamiseks • Kõrgpeegeldava peegelvääristusega prismad valgusjõulise pildi tagamiseks • Suur silma kaugus okulaarist tagab selge vaateala ka prillikandjatele • Pööratavad kummist silmapadjakesed multivajutusega, mis võimaldavad lihtsalt silma õigesse kohta positsioneerida • Veekindel (kuni 1 meeter kuni 10 minutiks) ja nitrogeengaas muudab uduvabaks • Kummist ümbris tagab põrutuskindluse ja kindla mugava haarde • Kergekaalulises keres on kasutatud klaaskiududega tugevdatud polükarbonaatvaiku • Kõikides läätsedes ja prismades on kasutatud on plii- ja arseenivaba optikat

Puhastusvahend prilliklaasidele, binoklitele ja objektiividele (50ml). Optika puhtus ja korrashoid on oluline osa fototehnika hoolduse puhul. Objektiivi läätsed on kaetud õhukese vääristuskihiga ning iga kord kui kasutada optika puhastamiseks suvalist lappi, piisab näiteks vaid juhuslikust liivaterast objektiivil ja kriimustused on kerged tekkima. Näpujälgedest vabanemiseks on vaja juba mikrokiust puhastuslappi ning vahel ka spetsiaalset spreid.

The studio set from Puluz is the perfect photography studio equipment. The product will also be a good choice for photography enthusiasts or novices. The PU5071EU is suitable for taking studio portraits, still life shots, children photo shooting, etc. The carrying bag will keep the contents of the set safely stored. The set includes a 50 x 70 cm softbox made of high quality fabric with silver foil along with a nylon white screen that softens hard light and eliminates shadows. In addition, the softbox can be quickly and easily unfolded and folded, and its storage is also not problematic. The tripod is made of the highest quality aluminum with a ¼ screw mount on top, making it durable. The adjustable height from 54 cm to 2 m provides freedom of use. In addition, the lighting angle of the softbox can be adjusted to 270°, providing adequate light from multiple angles. This allows everyone to adjust it to suit their photography needs. Four 20W LED bulbs with a standard E27 socket are also included. The bulbs are energy efficient, so you don´t have to worry about higher electricity bills. The 5700K color temperature provides pure, white and uniform daylight ensuring excellent illumination. Packing list: Tripod stand E27 LED light bulb x4 50 x 70 cm softbox with bulb socket Carrying bag

QooCam 8K 2 in 1 USB cable with dual type C ports ( for live streaming via Android cellphone during chargering)

QooCam 8K Protect case (Pack of 3 colors)

Quadralite 200 studio stand is a light and handy tripod for small studio flashes and speedlites. Because of its compact size and weight it´s a useful tool in studio and on location. Sections made of aluminum makes the tripod durable and stable at the same time. Maximum Height 200 cm This small stand is portable and seems to be a perfect solutions for mobile studio photographers. An universal tripod head allows to mount a wide range of studio lamps, bulbs and other equipment on it. Tripod is equipped with spring cushioning system.

Quadralite AIR 260 on 260cm kõrguseks käiv õhkamordiga valgustistatiiv Quadralite AIR 260 is a professional studio tripod. Made of aluminium and equipped with air shock-absorption system. It improves comfort of work. Smooth level adjustment is a big advantage for every photographer. Quadralite AIR 260 studio tripod is made of three section. Its main adventage is air shock-absorber. It helps smoothly lower the lamp. Tripod is 260cm high when fully elevated. It may be used with any studio flash with standard mount. Tripod is selling with universal mount (1/4″ and 3/8″). It may be used with lamps with fitted small and medium size light modifiers.

The Quadralite AIR 395 lighting tripod is designed to work in a photo studio. It is made of aluminum, which ensures low weight and stability. Quadralite AIR 395 is a professional studio tripod with a max height of 395cm. Thanks to its design AIR 395 is especially recommended for large light modifiers and high power studio flashes. Quadralite AIR 395 studio tripod is made of four sections with air shock-absorber. It helps smoothly lower the flash with light modifier without the risk of damage. Tripod may be used with any studio flash with standard mount thank´s to a universal mount pin(1/4″ and 3/8″) which is supplied in the kit.

Quadralite Atlas 600 TTL on sisseehitatud akuga, mille abil saab teha 500 täisvõimsusel välku. Lisaks on välgul ka integreeritud vastuvõtja. Tänu Bowensi tüüpi kinnitusele, saab lisada suure hulga Godox ja Bowensi softboxe BeautyDishe jpm. Saab kasutada ka laadimise ajal vooluvõrgust! Maksimaalne võimsus: 600Ws Juhtarv: 87 Välgurežiimid: M/Multi/TTL Aku võimsus: 8700mAh Taaslaadimine: 0.01-2.5s Pilootvalgus: LED Mõõdud: 220x245x125mm Kaal: 2.69kg

Quadralite Boom Multi Basic is a studio light stand that combines the best features of the Quadralite Boom tripod and the popular AIR 395 model. The stand has air cushioning in its largest section. This light stand comes from the BASIC line characterized by the excellent quality of workmanship known from Quadralite products offered at a very attractive price. The structure is made of durable aluminum profiles, ensuring adequate stability even under heavy loads. Boom lighting stands are perfect for situations where we need to place the lamp over the photographed object. Thanks to the dedicated point enabling the location of the counterweight, it is possible to properly balance the entire structure, which ensures safe and comfortable work in the studio. ● The compact size of the lightstand allows for easy transport, ● Perfect for outdoor sessions, ● Thanks to durable aluminum profiles, the structure ensures adequate stability under heavy loads, ● 400 cm of the maximum height of the tripod allows you to illuminate the studio in situations where an ordinary studio tripod is not able to reach such a height ● Possibility to obtain a functional light stand arm thanks to the pull-out column. ● 4 sections, ● Boom: 204cm, ● air cushioning in the largest section, ● attachment point for counterweight

This Tripod instead of air shock-absorption system has convertible boom arm which allows to use it as normal light stand or as a boom stand. Quadralite Multifunction Boom is smart solution for light support that provides user with strong stand with 6 kg capacity when used in traditional way or 2kg capacity when used as a fully extended boom. The legs feature wide footprint of 60 cm for good stability. Quadralite Multifunction Boom is made of aluminum which ensures high stability and long durability. Stand is equipped with a universal mounting pin with 3/8” and 1/4” screw for easy and quick installation of studio lamps, flash bulbs and other accessories. Kit also includes an empty nylon sandbag for counterweight. Main features: sturdy and robust all-metal construction featured and flexible stand with boom function high load capacity up to 6kg in stand position max. load in boom position: 2kg max height 3.95 meters Quadralite Boom Multi is a perfect combination of Quadralite Boom S and AIR 395 studio stands. This tripod instead of air shock-absorption system has convertible boom arm which allows to use it as normal light stand or as a boom stand. Quadralite Boom Multi is smart solution for light support that provides user with strong stand with 6 kg capacity when used in traditional way or 2 kg capacity when used as a fully extended boom. The legs feature wide footprint of 60 cm for good stability. Kit includes: Quadralite Boom Multi studio light stand, mount pin

Quadralite Boom S is a professional tripod with a load capacity of up to 4.5 kg. The tripod has a counterweight of 4 kg, which ensures stable operation even with large softboxes. The tripod´s arm can be set at any angle, which makes it easier to handle the light. The construction is fully metal which guarantees long life, durability and stability of the tripod. The central column has a spring shock absorber. The set includes a set of wheels that greatly facilitate the use of a tripod in studio conditions. The tripod has a universal mounting rod that allows you to mount studio flash lamps, flash bulbs and other equipment. Main product features: durable and stable metal construction, maximum load – 4.5 kg, maximum height – 395cm, boom length – 175cm, wheels with a lock Specification: model: Quadralite Boom S studio tripod Product type: Tripod maximum height: 395cm minimum height: 120cm maximum height to the boom: 185cm maximum boom reach: 175cm number of sections: 4 height after folding: 132cm diameter after folding: 24cm material: metal (aluminum) central column cushioning: spring loaded tripod mount: universal Permissible load in tripod mode: 6kg Permissible load in boom mode: 4kg tripod weight: 6.74kg The set contains: Quadralite Boom S studio tripod counterweight wheels mounting pin for lamps and accessories original packaging

Quadralite Collapsible Reflector w/Grip 5in1 90x120cm. The reflector is one of the simplest and most useful light modifiers. It is used both inside the photo studio and outside – outdoors. It is useful not only to photographers but also filmmakers regardless of whether they are professionals or amateurs. Quadralite reflector 5in1 is an excellent tool for modeling light in all conditions, enclosed in one small cover. It has up to five light-modifying surfaces, which means it can be quickly and easily adapted to the needs. Thanks to the use of two opposite handles, the reflector allows comfortable grip, even in adverse conditions during demanding outdoor sessions. The handle with grooves adapted to the hand makes the grip comfortable and the handle stable. The handles also allow easier and faster fixing of the reflector not only on dedicated stands and clamps, but also on all daily use items that allow hanging the reflector. Quadralite reflector offers five surfaces: white (satin) – allows you to get very diffused and soft light, ideally suited to fill shadows, is color neutral and can be successfully used as a background, silver (mirror) – does not scatter the light like a white screen and allows for contrasting lighting, does not change the color temperature of the light, can be successfully used as both a main and effect light source, silver-gold – it is covered with a characteristic pattern of alternating gold and silver stripes, it gives a contrasting light with a warmer color than the silver screen, which makes it perfect for portrait photos, emphasizing the warm tones of the skin of photographed people, it is much more useful than ordinary gold screens, diffusive – it is a white screen, transmitting a soft and highly diffused light, can be used to soften the light falling from a flash or sun, does not change the color of the light passing through it, black – reduces light reflection and can act as a valve to limit light propagation or work as a black background. The set contains: Quadralite reflector with handle 5in1 90x120cm case original packaging

Quadralite Flex Foldable Beauty-Dish is a light modifier which combines features of a foldable softbox and a beauty dish. Dimensions 65 cm. Depth in 34 cm. Quadralite Flex Foldable Beauty-Dish is a versatile light modifier that combines portability, lightweight construction and high quality materials. It can be use as a beauty-dish to deliver a dramatic lighting effect ideal for portrait, beauty and fashion photography. However it can be also transformed into a softbox to achieve soft and diffused light wrapping effect on the subject. Quadralite Flex Foldable Beauty-Dish is built on the basis of a quick folding mechanism, therefore it is easy to use and can be prepared for work in a few seconds. One of the biggest disadvantages of a metal beauty-dish is its stiffness and bulkiness. It cannot be folded down into a bag and is hard to carry around and store. Quadralite Flex Foldable Beauty-Dish is designed to deal with these problems. It is light, small when folded and easy to carry inside the supplied bag. Detachable center diffusion disc is the main reason why this outstanding light modifier is so versatile. This disc is suspended directly above the light source and is working as a deflector that channels the light onto a reflective surface of the shell. In this setup Flex Foldable Beauty-Dish is working just like a traditional metal beauty-dish but without its major drawbacks. However it can be transformed into a full-fledged softbox in a matter of seconds. Thanks to its spherical profile this light modifier is extremely efficient and portable. Especially in tight spaces, rooms and corridors it delivers the light exactly where you want it. If necessary, it can also be used with a grid (available separately) for better light control. Flex Foldable Beauty-Dish is based on 8-shaft octagonal frame construction, which provides appealing circular catchlights in the subject´s eyes. Outer shell is made from high quality rip-stop nylon fabric for high durability, long lifespan and small weight. Interior is laminated with highly reflective silver film for even light distribution across its surface. There are two layers of diffusers made from high quality polyester fabric. This part was carefully picked and tested to ensures proper white balance and color rendition. Main part of the frame is made of metal. Steel tension rods support the whole structure effectively and keep spherical shape despite lamp tilt. Mount and deflector are made of aluminum. Flex Foldable Beauty-Dish is equipped with widely used Bowens-type mount, which ensures compatibility with a wide range of studio and on-location lights available on the market. Thanks to separately available adapters it can also be used with Broncolor, Profoto and Elinchrome flashes. Main features: Can be used in two ways: as a beauty dish or softbox Octagonal design for circular catchlights – great for portraits, fashion and beauty Fast to fold and easy to carry Equipped with two, detachable diffusion screens Can be used with grids for more contrast and precision lighting Handy carrying bag included in the kit Heavy-duty all metal frame construction Compatible with all lights equipped with Bowens mount (adapters for Profoto, Broncolor and Elinchrome flashes are available separately) Specification: mounting: Bowens shape: Octagonal diameter: 65 cm depth: 34 cm dimensions (ready to work): 20×55 cm weight (netto): 1100 g weight (with case): 1380 g In the box: Quadralite Flex 65 Foldable Beauty-Dish Deflector two diffusers carrying bag original packaging

Textile honeycomb (Grid) for 180cm Quadralite octagonal softbox. An irreplaceable light modifier in every photo studio. The honeycomb narrows the beam of light, causing only a small loss. It is used in situations when we want to illuminate the center more strongly and darken the edges of the illuminated area. It is mainly used on lamps that give “counter” light and to highlight a selected part of the stage. It can also be used to subtly draw attention to an object, texture or color in a photographed scene. It also helps to achieve the intended atmosphere or moody atmosphere of the stage. Fastened with Velcro to the inner edge of the softbox. Basic features: high quality material mesh density: 6x6cm mesh depth 3cm diameter: 180cm Velcro for easy attachment to the softbox The set contains: Quadralite honeycomb (grid) for 180cm octa softbox original packaging

Quadralite LEDTuber Lighting Kit is made to meet the requirements of creators focused on video content who seek a complex solution for lighting in their home studio. Kit features two 45W LED fan cooled bulbs that produce the equivalency of approx. 375W of tungsten light each with minimal heat. These bulbs provide wide spread of even and soft light that is perfectly suited for home video recording. It can also be used for portrait or product photography. Furthermore LEDTuber is equipped with two light fixtures with umbrella holders and two 1.8m tripods.. Padded carry case supplied in the set makes it portable and easy to carry around. Features perfect lighting solution for home video studio and photography, exceptionally easy to use and portable, equipped with two 45W LED Bulb (equivalent to approx. 750W tungsten lamp), color Temperature of 5400K (±100K), featured with two light fixtures with umbrella holders and AC power cords, two 85cm white transparent umbrellas ensures an even distribution of soft and smooth light on the subject , padded carry bag and 2x 1.80m tripods included. Kit includes 2x 45W LED bulbs, 2x 85cm white transparent umbrellas, 2x light fixtures/umbrella holders with power cords, 2x 1.8m studio stands 1x storage/carry bag.

Quadralite M-9 is a holder allowing to mount the studio flash to a tripod. Is equipped with universal tripod mount which allows to use it with almost all studio tripods. The assembly of a flash and other accessories is carried out with a spindle which comes with two threaded fittings in ¼ and 3/8 inch. The handle features an umbrella mount which enable users to easily and quickly model the flash light generated by the connected flash. The flash´s tilt angle and the umbrella may be adjusted. ● Tilt angle adjustment. ● Umbrella mount. ● Universal mount for a studio tripod. ● Option to mount accessories on a spindle with ¼ and 3/8 threads. ● Durable and solid construction made of metal.

Navigator X2 S trigger is the ultimate controller for all Quadralite X wireless system devices. Thanks to its large backlit dot matrix LCD screen the User can control up to 5 flash groups simultaneously including their zoom function, flash exposure compensaton and modeling light status. The device is equipped with a sеt of five direct action buttons to make work with a multi-light sеtup easy, fast and comfortable. Ergonomically located control dial ensures precise control over flash power output and other major functons. Built in AF assist light supports camera´s auto-focus adjustment which can be compromised in poor lighting conditions. Navigator X2 S is fully compatible with Sony MIS automatic TTL flash light metering system and can be used with all Quadralite TTL-capable flashes. Furthermore it can control lights in manual mode (M) and Multi (stroboscopic) modes as well. The User can sеt flash exposure compensation or adjust flash energy output manually. High-Speed Sync and Second Curtain Sync are also supported. The device is equipped with a USB Type-C port for firmware updates and runs on two AA bateries for convenience. Main features: compatble with Sony MIS automatc TTL flash light metering system ultimate radio controller for all Quadralite X wireless system devices 2.4 GHz wireless transmission ensures stable work on longer distances both in studio and on location (up to 100m) 32 communication channels and 16 groups for fast configuration and control over many lights TCM function ensures fast conversion of TTL sеttings to Manual values for exposure accuracy AF assist helps to adjust focus distance in poor light conditons large backlit LCD screen can display 5 groups sеttings simultaneously HSS (High Speed Sync) up to 1/8000 firmware update is possible through built-in USB-C Type port

Quadralite Reporter 200 ringvälgu tarvikute komplekt Magneetiline kinnitus: lihtsaks ja kiireks paigaldamiseks

Replacement Flash Tube for the Godox AD200Pro. Quadralite Reporter 200 TTL Flashtube.

Snoot is the perfect lightening tool for portrait photos. Quadralite Snoot Pro is a specialized attachment for studio flash units allowing precise lighting of selected parts of the photographed scene or object. Thanks to the large volume of the tube and the open design, it guarantees good ventilation of the flashtube. It is especially recommended for use with high-speed Quadralite Pulse Pro lamps. The set includes colored filters that allow you to get interesting lighting effects. In addition, the spotlight is equipped with a honeycomb, the cap has a Bowens mount and can be used with Quadralite lamps and other alternative manufacturers. The set contains: snoot grid for snoot color filters original packaging

Quadralite Softboxes are often easier to manage than umbrellas when it comes to controlling the amount of light that falls on the backdrop or background of an image. “Barndoors” and “honeycomb grids” can also be used to restrict the area illuminated by soft boxes. A softbox can be used with flash or continuous light sources. Main features: softbox diameter: 180cm additional diffuser velcro fit for other accessories speedring bowens fit box size: 113x8x24 soft pouch size: 113x5x24 In the box: Quadralite octa 180cm softbox carrying pouch original packaging

Quadralite SVL-400 LED is an extremely lightweight and quiet lamp based on LEDs. With 40W power, the device can be easily used not only in photography but also on small film sets. COB LEDs guarantee a stable stream of light, which is characterised by high colour rendering index (CRI≥96,3) and colour temperature close to sunlight (5800K). The fresnel lens with adjustable range allows you to adjust the light beam in the range from 15 to 40 degrees. The universal Bowens mount will provide the possibility of using various light modifiers such as reflectors, softboxes and gates, allowing for even better effects during the session. The built-in cooling system protects the equipment from overheating, allowing you to use the lamp for a longer period, and the quiet operation of the fan will not interfere with the sound recording process during filming. Another important feature is the lifespan of the LED used in the lamp, which reaches 50,000 h which is the equivalent of over 5.5 years of continuous operation. The small casing and low weight make it possible to take the lamp with you on every session. ● Active cooling system, ● Small size and weight, ● Power adjustment from 5-100%, ● Color temperature: 5800K ● CRI >96,3 ● TLCI >99 ● Ability to manually adjust the light beam from 15 to 40 degree ● Maximum output power: 40W, ● High accuracy and narrow beam of light, ● 5-100% power adjustment allows you to adjust the light intensity perfectly to the situation, ● Built-in easy to read LED display indicating the current light settings and battery status, ● Powered by Sony NP-F power adapter or batteries ( sold separately), ● NP-F type batteries make the flash can also be used away from a stationary power source, ● Intuitive operation and simple interface, ● Sturdy composite housing. ● Bowens mount for mounting many useful accessories such as softboxes, gates and reflectors KIT includes only lamp Power supply not included

Quadralite SVL-400 LED PLUS is a complete kit created for every photographer who values quality and mobility. The box contains an extremely lightweight and quiet lamp, based on LEDs. With the power of 40W, the device can be easily used not only in photography but also on small film sets. COB LEDs guarantee a stаble stream of light, which is characterised by high colour rendering index (CRI≥96,3) and colour temperature close to sunlight (5800K). The fresnel lens with adjustаble range allows you to adjust the light beam in the range from 15 to 40 degrees. The universal Bowens mount will provide the possibility of using various light modifiers such as reflectors, softboxes and gates, allowing for even better effects during the session. The built-in cooling system protects the equipment from overheating, allowing you to use the lamp for a longer period, and the quiet operation of the fan will not interfere with the sound recording process during filming. Another important feature is the lifespan of the LED used in the lamp, which reaches 50,000 h which is the equivalent of over 5.5 years of continuous operation. The small casing and low weight make it possible to take the flash with you on every session and the included bag will ensure the safety of the set during transport. The tripod bracket included in the package gives you the possibility of adjusting the angle of inclination, allowing for precise lamp positioning and umbrella mounting. ● Maximum output power: 40W, ● High accuracy and narrow beam of light, ● Power adjustment from 5-100% allows you to adjust the light intensity perfectly to the situation, ● Built-in easy to read LED display indicating current light settings and battery status, ● Mains power supply or Sony NP-F type batteries ( sold separately), ● NP-F type batteries make the flash can also be used away from a stationary power source, ● Intuitive operation and simple interface, ● Sturdy composite housing, ● Bowens mount for mounting many useful accessories such as softboxes, gates and reflectors, ● A velcro-fastened bag with two handles to hold the entire kit, ● Tripod mount with adjustаble lamp angle and umbrella attachment Kit includes: SVL-400 LED lamp, Bag, Power Supply, Tripod holder, Box,

Small size Full control of color temperature – CCT Full RGB color palette Can be used for photo and video Additionally 12 lighting effects can be used during video recording The Quadralite Talia 300 RGB LED panel is a light source designed for creative use in the studio. Its key feature is the full RGB color palette (360°), thanks to which you will be able to approach the topic of your session in a unique way. Thanks to the dedicated diffusion layer, this panel will guarantee you a soft studio light on the recording without the need for additional modifiers. The light source is LEDs with a high color rendering index CRI>95. The lamp emits a wide beam of strong light, devoid of flickering effect, and all this with the ability to adjust the color temperature of the lamp in the range of 3500-6500K (±300K) thanks to a dedicated knob located on the back of the panel. This function will allow you to adjust the lamp light to the existing light, thus obtaining a natural effect on your recording. The panel also has 12 modes of operation, which allow for even more creativity in working on the set. High brightness of the emitted light, high colour deviation coefficient CRI > 95+, possibility of smooth color temperature control 3000 K – 6500 K, full RGB range, passive cooling, smooth brightness adjustment, small size and weight, no flickering effect.