<div>The RAM-271U-12, round pipe base, consists of a 1.5" rubber ball connected that will connect to a pipe tubing diameter from 1.25" to 1.875" in diameter.</div><div><br></div>
Designed for heavy duty fresh water use, this C size (1.5”) aluminum drill-down kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution. Simply attach the included adapter to the Lowrance Hook² and you're ready to connect the double socket arm and round base featuring the AMPS hole pattern. Made of high strength composite and powder coated marine grade aluminum, this kit is designed to keep your Hook² secure and stable in rugged environments on your boat, kayak or inflatable.
The RAM Track Ball is made up of a C size 1.5" rubber ball molded to a high strength composite base, a rubber friction washer and a stainless steel T-bolt for sliding into virtually any track system. Simply insert or slide the Track Ball into your track and twist the ball clockwise to tighten in place. Twist counterclockwise to loosen or adjust the ball.
The RAM-D-111B-IN1U is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
Get the perfect shot from your action camera when you're out on the water with the Tough-Pole™. This kit consists of a 1.5" short double socket arm, 12" PVC pipe, B size short arm at the top and universal action camera adapter. The various ball and socket components allow you to adjust your mount at virtually any angle, and offer the ability to collapse and stow away when not in use. Any action camera with a two-pronged attachment (including GoPro®) will work with the action camera adapter, and the bottom socket can attach to any RAM 1.5" ball base.
<div>The RAM-B-217U consists of two 1" diameter rubber balls connected to a post and 2.5" diameter round base. The round base has pre-drilled holes, including the universal AMPs hole pattern and 3-hole 120 degree pattern. The 1" balls measure center to center 2.5" apart.</div><div><br></div>
The RAM-101U-B-247-25 consists of a short length double socket arm, 2.5" diameter round base with the universal AMPS hole patternand a 2.5" maximum width square post clamp base.
The RAM-101U-247-25 consists of a 6 inch double socket arm, round 2.5" diameter round base with the universal AMPS hole pattern and 2.5" clamp base. The clamp base will wrap around a maximum width of 2.5" and is tightened by screwing the two plates together with the included nuts and bolts. Rubber ball, socket technology dampens shock and vibration, as well as allows for almost infinite adjustment, perfect viewing angles.
<div>The RAP-B-224-2U consists of a 2.75" twist lock suction cup base with 1" rubber ball. The suction cup is designed to have an extra strong hold on any smooth, non-porous surface. For best results mount the suction cup on glass or non-porous plastic surface.</div><div><br></div>
The RAM-D-2461U consists of a 2.25" rubber ball, connected to a 3.625" square plate with a 75mm X 75mm VESA hole pattern. The rubber ball is positioned 0.88" from the center of one edge.
<div>The RAM-2461U consists of a C size 1.5" rubber ball connected to a 3.625" square plate featuring a 75mm x 75mm VESA hole pattern. The rubber ball is positioned 0.88" from the center of one edge. The RAM-2461U will attach to all RAM® C size double socket arms.</div><div><br></div>
<div>The RAM-137BU, universal mounting plate, consists of a 1.5" diameter rubber ball, connected at right angles to a flat 3" x 11" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.</div><div><br></div>
The RAM-101U-247-4 consists of a double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and 4" clamp base. The clamp base will wrap around a sqare post with a maximum width of 4" and is tightened by screwing the two plates together with the included nuts and bolts. Rubber ball, socket technology dampens shock and vibration, as well as allows for almost infinite adjustment, perfect viewing angles.
The RAM-D-115-E consists of a base with a 2.25” diameter D size ball, a long arm and a 6.25” x 2” marine electronic plate with a D size ball for supporting larger devices. This marine electronic plate contains different combinations of pre-drilled holes and is a direct fit for 9”-12” fishfinder gimbal brackets. Supports devices such as the Lowrance HDS-9 Gen2 Touch, Garmin GPSMAP 7407 and more.
The RAM-D-115-C consists of a base with a 2.25” diameter D size ball, a short arm and a 6.25” x 2” marine electronic plate with a D size ball for supporting larger devices. This marine electronic plate contains different combinations of pre-drilled holes and is a direct fit for 9”-12” fishfinder gimbal brackets. Supports devices such as the Lowrance HDS-9 Gen2 Touch, Garmin GPSMAP 7407 and more.
RAM-D-115 consists of a base with a 2.25” diameter D size ball, a standard arm and a 6.25” x 2” marine electronic plate with a D size ball for supporting larger devices. This marine electronic plate contains different combinations of pre-drilled holes and is a direct fit for 9”-12” fishfinder gimbal brackets. Supports devices such as the Lowrance HDS-9 Gen2 Touch, Garmin GPSMAP 7407 and more.
<div>Designed to hold an XM or GPS antenna magnetically, the RAM-348U plate will attach between any RAM base with the AMPS hole pattern and most standard XM units. Mount your satellite radio receiver and antenna all on a single platform for both ease of installation and use. Whether you've run out of mounting space or simply have few good mounting surfaces, the RAM-348U antenna adapter plate opens up many possibilities.</div><div><br></div>
This kit includes a B size RAM® diamond ball base with a universal hardware pack that accommodates the armrest on most major wheelchair brands, including Invacare, Permobil, and Quickie. With the included long double socket arm, double ball adapter, and medium double socket arm, connect and adjust the RAM® X-Grip® universal phone holder to your ideal position. The popular, spring-loaded RAM® X-Grip® provides a perfect fit for a wide variety of phones.
<div>OVERVIEW</div><div>The Garmin VIRB™ is one of the most exciting Action Sports Cameras with almost unlimited capabilities and applications. Upgrade your ride with an affordable mounting solution that enables the capture of video, at the pristine time and at the best angles. With the RAM patented rubber ball and socket system easily maneuver the VIRB™ in all directions, without obstruction of your view while riding. Constructed of the finest materials, The RAM design will dampen shock and vibration; this ensuring your camera is mounted firmly, safely and solidly. When not in use quickly release your camera for relocation or stowage. Backed with a lifetime warranty, RAM provides the only accessories necessary for your complete viewing enjoyment.</div>
<div>The RAM-B-236U consists of a 1" rubber ball connected to a 3/8"-16 threaded post. Thread length is .5". The RAM-B-236U will attach to all 1" diameter ball compatible arms.</div><div><br></div>
<div>The RAM-B-202U-12 contains a 1" diameter rubber ball connected to a rectangular plate with a 2-hole pattern of 1.5" center to center.</div><div><br></div>
The RAM-202-153-B-202U consists of a round 2.5" diameter round base (Universal AMPs Hole Pattern), short double socket arm and 1.5" x 3" rectangular base. The rectangular base contains four holes with a center to center pattern of 1" x 2.5". For most applications, mount will support up to ten pounds.
<span style="font-family: Roboto, sans-serif; font-size: 16px;">The RAM-202U-153 contains a 1.5" diameter rubber ball connected to a rectangular plate with a 4-hole pattern of 1" x 2.5" center to center.</span>
The RAM-D-111BU, universal mounting plate, consists of a 2.25" diameter rubber ball, connected at right angles to a flat 11 x 3" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices.
