<div>The RAM MOUNTS Twist Lock Suction Cup Mount with Custom GoPro Hero Adapter allows you to attach a GoPro HERO action camera to a variety of smooth, flat surfaces including glass, non-porous plastics, painted sheet metal, and more. For courser surfaces you can even employ one of the RAM MOUNTS adhesive disks, available separately, between the suction and the mounting surface. Linking the suction cup and the GoPro mount there is a 3" extension arm that is articulated at both ends using ball joints. A single knob unlocks both joints, allowing you to tilt, rotate, raise/lower, and swivel the camera into just about any angle conceivable.</div><div><br></div>
<div>The RAP-B-166-GOP1 consists of a 3.3" diameter suction cup twist lock base, double socket arm and 1" diameter ball with custom GoPro® Hero adapter. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including adhesive disks. The GoPro® Hero adapter attaches directly to the underside of the camera, replacing the factory mounting bracket.</div><div><br></div>
<div>The RAM-B-166-A-GOP1U consists of a 3.3" diameter suction cup twist lock base, SHORT length double socket arm and 1" diameter ball with custom GoPro® Hero adapter. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including adhesive disks. The GoPro® Hero adapter attaches directly to the underside of the camera, replacing the factory mounting bracket.</div><div><br></div>
<div>For M8 handlebar bolts, the RAM-B-367U motorcycle handlebar base will replace the existing bolt with a 1" B size ball. This rubber ball base provides shock and vibration damping, and is compatible with a wide variety of B size RAM® double socket arms and device holders. The RAM-B-367U motorcycle handlebar base will work with any motorcycle that features an 8mm bolt or smaller on its structure. A smaller bolt can be used, though the load capacity decreases with the bolt size.</div><div><br></div>
<div><span style="font-size: medium; font-weight: bold;">RAM® X-Grip® Large Phone Mount with Brake/Clutch Reservoir Base</span></div><div><br></div><div><span style="font-size: medium;">RAM-B-174-UN10 koosneb riistvarast, mis on ette nähtud paigaldamiseks kas piduri/siduri reservuaaridele ja siinidele, mille läbimõõt on 0,5" kuni 1,25", kahe pistikupesa hoovast ja universaalsest X-Grip® suurest telefoni-/phabletihoidikust. Kinnitusse on kavandatud 1-tollise läbimõõduga patenteeritud kummist kuuli- ja pesasüsteem, mille reguleerimispunktid on pistikupesa mõlemas otsas; see võimaldab hoova nupu keeramisega liigutada X-Grip®-i kinnituse optimaalsesse vaatamisasendisse. . Piduri-/siduripaakide kinnitusriistvara sisaldab nii standardseid kui ka metrilisi kinnituspolte. Kaasasoleval X-Grip®-i hoidikul on puhas ja nutikas nelja jalaga disain, millel on suurepärane hoidmisjõud, ilma telefoni vahtpatjade ja plasti taha peitmata. Vedruga X-Grip® hoidik laieneb ja tõmbub kokku, võimaldades teie mobiiltelefoni täiuslikku kohandamist. Tänapäeva sõidukite moodsa elegantse interjööri täiuslikuks täienduseks on RAM X-Grip®, mis on edasi arendatud mobiiltelefoni hoidik. X-Grip® sisaldab välitingimustes kasutamiseks soovitatavat seadme kinnitust. Häll ühildub pihuseadmetega, mis sobivad allpool loetletud mõõtmetega. T määramisel on oluline kontrollida oma pihuseadme mõõtmeid ümbrise/ümbrise/kestaga ta üldine suurus.</span></div><div><span style="font-size: medium;"><br></span></div><div><span style="font-size: medium;"><br></span></div><div><span style="font-size: medium; font-weight: bold;">LISAINFORMATSIOON</span></div><div><span style="font-size: medium;">Kokkupuude vibratsiooniga, nagu suure võimsusega mootorrattamootorite tekitatud vibratsioon, võib mõjutada iPhone'i kaameraid.</span></div>
The RAM-B-174-UN7 consists of hardware for mounting to either brake/clutch reservoirs and rails that are 0.5" to 1.25" in diameter, double socket arm and universal X-Grip® cell phone cradle. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob, allows you to move the X-Grip® mount to your optimum viewing position. The mounting hardware for brake/clutch reservoirs include both standard and metric mounting bolts. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved.The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.Cradle DimensionsMinimum Width = 1.875" (Minimum Height = 4.25")Maximum Width = 3.25" (Minimum Height = 2.25")Depth = 0.875"
Designed for light duty freshwater use, this B size (1”) aluminum drill-down kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution. Simply attach the included adapter to the Lowrance Hook² and you're ready to connect the double socket arm and round base featuring the AMPS hole pattern. Made of high strength composite and powder coated marine grade aluminum, this kit is designed to keep your Hook² secure and stable in rugged environments on your kayak or inflatable.
Designed for heavy duty fresh water use, this C size (1.5”) aluminum drill-down kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution. Simply attach the included adapter to the Lowrance Hook² and you're ready to connect the double socket arm and round base featuring the AMPS hole pattern. Made of high strength composite and powder coated marine grade aluminum, this kit is designed to keep your Hook² secure and stable in rugged environments on your boat, kayak or inflatable.
The RAM-102U-B-2461 consists of a SHORT double socket arm and 3.625" square plate with VESA hole pattern. The VESA plate contains 75x75MM hole patterns. The rubber ball is positioned 0.88" from the center of one edge.
The RAM-101-LO11 consists of a 2.5" diameter round base that contains the universal AMPS hole pattern, 6 inch double socket arm and adapter base that inserts directly to the back of Lowrance Elite-5, Elite-5 Ti, Elite-7 Ti/Ti², HOOK-3, HOOK-4, HOOK-5 and MARK-5 Fishfinders. The adapter serves as a quick release mechanism, allowing you to remove or transfer your Fishfinder in seconds. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles.
<div>The RAM-101U-D-246 consists of a long double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and 4.75" square plate with the VESA hole pattern. The VESA plate contains a 75mm X 75mm and 100mm X 100mm hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles.</div><div><br></div>
The RAM-B-149Z-A-GOP1 consists of a zinc coated u-bolt base, SHORT size double socket arm and 1" diameter ball with custom GoPro Hero adapter. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Included in this package is hardware that will accommodate rails from 0.50" to 1.25" in diameter.
