<div>With the RAM Tough-Track, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks, and more. This track mount solution can be drilled to any flat surface and is designed for use with #10 screws for easy installation – hardware not included. The Tough-Track works with a wide variety of RAM track bases to attach devices like action cameras, fishing rods, phones, and tablets.</div><div><br></div>
This powder-coated, marine-grade aluminum Humminbird mount consists of a short length double socket arm, a 3.68" diameter round base with a 2.25" D size ball, and one 1.5" x 4.5" rectangular plate with a 2.25" D size ball. The round plate contains two mounting holes at 180-degrees and three mounting holes at 120-degrees. The 1.5" x 4.5" rectangular plate contains a 4-hole pattern compatible with Humminbird 8, 9 & 10 models. The rubber ball and socket technology provides shock and vibration damping, and allows for near-infinite adjustability so you can position your device at the perfect viewing angle.
<div>The RAM-202U consists of a 1.5" C size rubber ball connected to a 2.5" diameter round plate. This mounting component includes pre-drilled holes using the universal AMPS hole pattern.</div><div><br></div>
<div>The RAP-B-238U ball base consists of a 1" B size rubber ball connected to a 2.43" x 1.31" diamond plate. The diamond plate features two holes that measure 1.912" from center to center, matching the industry-standard AMPS hole pattern. This diamond ball base is compatible with a wide variety of RAM® device holders and cradles.</div><div><br></div>
<div>With the RAM Tough-Track, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks, and more. This track mount solution can be drilled to any flat surface and is designed for use with #10 screws for easy installation – hardware not included. The Tough-Track works with a wide variety of RAM track bases to attach devices like action cameras, fishing rods, phones, and tablets.</div><div><br></div>
<div>The RAM-E-202U consists of a 3.38" diameter rubber ball, connected at right angles to a 3.68" diameter round plate. The plate has pre-drilled holes in the base plate, including two holes at 180 degrees and three holes at 120 degrees.</div><div><br></div>
The RAM-240U consists of a 1.5" diameter rubber ball connected to a flat 3.68" diameter base. This base has 3-hole 120 degree pattern pre-drilled holes that connects to RAM Tough-Dock™ Powered Docking Stations.
<div>The RAM-D-202U consists of a 2.25" diameter rubber ball, connected at right angles to a 3.68" diameter round base. The base has pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees.</div><div><br></div>
Available in lengths ranging from 4" to 30", the RAM® Hand-Track™ is an ideal track and handrail solution for ATVs, boats, kayaks and more. Compatible with all RAM track mounts, the Hand-Track includes two top-loading end caps for attaching to a flat surface. To combine multiple tracks, pair with any top-loading Hand-Track Extension with Center Connector.
<div>With the RAM Tough-Track, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks, and more. This track mount solution can be drilled to any flat surface and is designed for use with #10 screws for easy installation – hardware not included. The Tough-Track works with a wide variety of RAM track bases to attach devices like action cameras, fishing rods, phones, and tablets.</div><div><br></div>
Looking to mount to a metal surface? The RAM® Tough-Mag™ 66mm diameter base is the powerful and durable solution you've been searching for. With a B size ball screwed into a ¼-20” threaded post, simply attach a compatible double socket arm and your desired RAM® device holder. This base features an industrial-strength N35 grade magnet and rubber coating that protects the metal surface you're attaching the RAM® Tough-Mag™ to.
Looking to mount to a metal surface? The RAM® Tough-Mag™ 88mm diameter base is the powerful and durable solution you’ve been searching for. With a B size ball screwed into a ¼-20” threaded post, simply attach a compatible double socket arm and your desired RAM® device holder. This base features an industrial-strength N35 grade magnet and rubber coating that protects the metal surface you’re attaching the RAM® Tough-Mag™ to.
<div>With the RAM Tough-Track, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks, and more. This track mount solution can be drilled to any flat surface and is designed for use with #10 screws for easy installation – hardware not included. The Tough-Track works with a wide variety of RAM track bases to attach devices like action cameras, fishing rods, phones, and tablets.</div><div><br></div>
<div>RAM Twist and Tilt™ mount for motorcycle handlebar or mirror bracket attachment. Simply choose your preferred mounting location and the possibilities become endless. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. The versatile mounting base in this kit pivots up, down, left and right affording you the ultimate in adjustability. With a turn of a single comfortable to grasp knob, viewing adjustments can be made and the sleek hourglass shape of the arm assembly compliments the lines of any motorcycle. High quality materials insure your electronic device is safe, secure, and within easy reach. RAM’s patented design also dampens shock and vibration helping to extend the life of your mobile device.</div><div><br></div>
<div>The RAP-B-230-1U is a composite double swivel mount with two 1 inch diameter RAM "B" sized balls. Connects to other RAM "B" sized accessories.</div><div><br></div>
The RAM antenna mount is designed to hold most VHF and similar antennas. The patented rubber ball and socket system securely mounts the antenna while allowing for almost infinite adjustment. Mount the antenna on a horizontal or vertical surface or anywhere in between. The ball base is made from a lightweight marine grade aluminum with powder coat. The ball socket and male 1" -14 threaded post are made from high strength composites designed for prolonged outdoor use. The RAM antenna mount will work with any standard antenna that has a 1" -14 threaded interface.
<div>This RAM® MagSafe Adapter is designed specifically to fit the official Apple MagSafe Charger with the added benefit of RAM® Mounts compatibility. This adapter allows a perfect and secure fit for the MagSafe's charging disk and is only compatible for the iPhone 12, iPhone 13 & iPhone 14 series, with or without an official Apple MagSafe case. This MagSafe holder is compatible with RAM® B size socket arms, unlocking various bases for multiple mounting locations in your vehicle. Take advantage of your iPhone's magnetic MagSafe charging abilities with this MagSafe mount.</div><div><br></div>
<div>The RAM AQUA BOX® product line has been keeping mobile phones and devices safe for years. Included with the newest AQUA BOX® Pro 20 i5 is a unique patented flex lens that allows you to easily operate all the side buttons on your iPhone 5. Weather resistant, the AQUA BOX® will ensure your phone is dry and safe, even when accidently dropped into water. The optically clear membrane provides the best tactile screen operation and viewing, giving you full access to text message, listen to music, take photos or capture video. Compatible with a full line of RAM mounts, we guarantee the AQUA BOX® Pro 20 i5 to be the perfect mounting solution for your phone.</div><div><br></div>
<div>The RAM AQUA BOX® product line has been keeping mobile phones and devices safe for years. Now, with the introduction of the AQUA BOX® Pro, you have access to side buttons and full use of the touchscreen. With a mountable case that is perfect for use on ATVs, motorcycles, boats and all other motorsports vehicles, your phone will be well protected and within easy reach. Weather resistant and splash proof, this unique patented design allows access to all side buttons on the phone while in the case. Are you one of those people that can be a little rough on things? Our PVC Vinyl screen is replaceable so if you start to lose that crystal clear appearance, we’ve got you covered…literally. Allowing easy operation of the touch screen while in the case, the compact and sleek design means traveling with your AQUA BOX® Pro is never a hassle. Think an enclosure will slow you down? Think again. Send text messages, listen to music, take photos or capture video, make calls all while protecting your phone.</div><div><br></div>
<div>The RAM-202CNSU consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base with 3/8"-16 female threaded hole. This mount has pre-drilled holes, including the universal AMPS hole pattern.</div><div><br></div>
<div>The RAM-202AU consists of a 1.5" rubber ball that is connected to a 2.5" diameter round base. Also, included is a 1/4"-20 threaded steel stud, centered, the round base provides support and stability for cameras that rest on top of it. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras.</div><div><br></div>
<div>The RAM-107BU is a marine grade aluminum base with 1.5" rubber ball. The base connects to the underside of Humminbird and Raymarine marine GPS devices.</div><div><br></div>
<div>The RAM adapter base includes a 1.5" diameter rubber ball and inserts directly to the back of Lowrance Elite-5, Elite-5 Ti, Elite-7 Ti/Ti², HOOK-3, HOOK-4, HOOK-5 and MARK-5 Fishfinders. The adapter serves as a quick release mechanism, allowing you to remove or transfer your Fishfinder in seconds.</div><div><br></div>
<div>The RAM-B-202AU, universal camera and camcorder base, consists of a 1" diameter rubber ball, connected to a 2.5" diameter round plate with 1/4"-20 camera thread. The round plate provides extra support and stability for cameras that rest on top of it. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras.</div><div><br></div>
<div>The RAM-108BU consists of a 1.5" diameter ball connected to a base with single strap. The strap will accommodate rails from 1" to 2.1" in diameter.</div><div><br></div>
<div>With the RAM magnifier, you won't have to lean closer or squint to see where you're at or where you're going. The magnifier is 2" x 4" with 2x zoom. The RAM magnifier adaptor quickly installs between the RAM diamond mounting base and the device cradle. The magnifying lens can be adjusted to a variety of angles to accommodate a wide variety of GPS units providing a more easily readable screen. The RAM-MAG-1 is compatible with all RAM diamond bases that contain the universal AMPS 2-hole pattern.</div><div><br></div>
<div>The RAM RAM-B-125BU, curved extension base includes a 1" rubber ball; it allows for almost infinite adjustment and perfect viewing angles. Originally designed to position your GPS in front of the yoke on your plane, the extension plate can also be used in many other applications. The mounting section of the plate is 2.5" square, predrilled holes for many different screw hole patterns, including the universal AMPS hole pattern and all RAM made cradles. The connection section extends approximately 2.25" forward, at a 45 degree angle, from the center of the 1" ball and approximately 1.5" above the 1" ball (to the bottom of the connection section of the plate).</div><div><br></div>
The RAM-B-309-2U connects to your handlebar clutch/brake clamp, left or right side, and holds two 1" diameter mounting ball. The ball that is connected between the hole centers is removable. The base fits the control clamps on your motorcycle with 40mm x 6mm stainless steel hardware, provided in the kit. To see if the RAM-B-309-2 base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58".
<div>The RAM-B-309-1U attaches to your motorcycle's handlebar clutch/brake clamp and features one B size 1" rubber ball. The base fits the control clamps on your motorcycle with 40mm x 6mm stainless steel hardware, provided in the kit. To see if the RAM-B-309-1U base is compatible with your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The hole centers have a minimum width of 0.94" and a maximum of 1.58".</div><div><br></div>
<div><span style="font-size: medium; font-weight: bold;">RAM® Twist and Tilt™ mootorratta peegli pallialus</span></div><div><span style="font-size: medium; font-weight: bold;"><br></span></div><div><span style="font-size: medium; font-weight: bold;">TOOTETEAVE</span></div><div><span style="font-size: medium;"><br></span></div><div><span style="font-size: medium;">RAM pakub laias valikus mootorratta kinnitusi. Suurepärane uus täiendus sellele niigi ulatuslikule tootesarjale on meie uus Twist and Tilt™ alus. Valmistatud survevalualumiiniumist, vastupidavus ei valmista muret. Patenteeritud kummikuul summutab lööke ja vibratsiooni, aidates säilitada paigaldatud seadme jõudlust. Lihtne kasutada ja paigaldada, see suurepärane väike toode ühildub paljude 1-tolliste kuulkinnitussüsteemidega. Kompaktne ja diskreetne Twist and Turn™ ei võta palju ruumi, kuid pakub palju paigaldusvõimalusi.</span></div><div><span style="font-size: medium; font-weight: bold;"><br></span></div><div><span style="font-size: medium; font-weight: bold;">RIISTVARA KAASA</span></div><div><span style="font-size: medium;">(1) M10-1,25 x 40 mm pistikupeaga kruvi</span></div><div><span style="font-size: medium;">(1) M8-1,25 x 40 mm pistikupeaga kruvi</span></div><div><span style="font-size: medium;">(2) M10-1,25 kuuskantmutrid</span></div><div><span style="font-size: medium;">(2) M8-1,25 kuuskantmutrid</span></div><div><span style="font-size: medium;">(1) M10-1,25 x 20 mm pesapeaga kruvi</span></div><div><span style="font-size: medium;">(1) M8-1,25 x 20 mm pistikupeaga kruvi</span></div><div><span style="font-size: medium;">(3) M10 hambaluku seibid</span></div><div><span style="font-size: medium;"><span style="font-weight: bold;">PALLI SUURUS</span> – B-suurus (1")</span></div><div><span style="font-size: medium; font-weight: bold;">KAALUKOHUTUS</span></div><div><span style="font-size: medium;">Standardkasutus: 2 naela</span></div><div><span style="font-size: medium;">Raskeveokite kasutamine: 1 nael</span></div><div><span style="font-size: medium;"><span style="font-weight: bold;">MATERJALID </span>– merealumiinium</span></div><div><span style="font-size: medium;"><span style="font-weight: bold;">PAKENDI TÜÜP </span>- polükott</span></div><div><span style="font-size: medium;"><span style="font-weight: bold;">KAAL</span> - 0,55 naela.</span></div><div><span style="font-size: medium; font-weight: bold;">LISAINFORMATSIOON</span></div><div><span style="font-size: medium;">Ei soovita ega soovitata kasutajatel eemaldada kõik olemasolevad roostevabast terasest kruvid ja asendada need Twist and Tilt RAM Mount aluse vastu. Selle näiteks on juhtraua kinnitusklamber või muud olulised kinnitusdetailid, mis hoiavad koos olulisi konstruktsioonikomponente.</span></div>
The RAM-D-115BU, universal mounting plate, consists of a 2.25" diameter rubber ball, connected at right angles to a flat 6.25" x 2" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices.
<span style="font-size: medium; font-weight: bold;">RAM® Double Socket Arm</span><div><span style="font-size: medium;"><br></span></div><div><span style="font-size: medium;">RAM-201U koosneb keskmise pikkusega kahekordse pistikupesaga varrest, mis mahutab 1,5" C-suuruses kuulialused, seadmehoidikud ja adapterid. Üks vedru käe sees hoiab pistikupesa avatuna ja võimaldab sisestada kuuli pesaühendusse. Selle käe kogupikkus on 5,69 tolli. Lihtsalt reguleeritav nupp võimaldab peaaegu lõpmatu reguleeritavuse.</span></div>
The RAM-201LU, standard double socket arm with locking knob, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. The locking knob, includes a brass 1/4"-20 thread; this allowing you to disengage the screwing of the knob. Once you have set your mount in the location you need, you can lock it in place and feel safe that your mounted device will stay right where you left it.
The RAM-B-189-TAB8U consists of a double 3.3" twist lock suction cup base, double socket arm, round base adapter and Tab-Tite™ universal clamping cradle. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The included Tab-Tite™ cradle includes a spring loaded back plate and custom support cups for 10" screen tablets WITH heavy duty cases. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
The RAM-B-189-PIV1-UN9U consists of a dual articulating 3.3" twist lock suction cup base, double socket arm, and universal X-Grip® cradle for 10" Tablets. The dual articulating suction cup base is an amazing innovation in suction cup mounting. With the ability to independently articulate each suction cup, this mounting base can be used in a variety of applications such as curved windows and surfaces. The X-Grip® cradle is compatible with devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
The RAM-B-189-PIV1-UN11U consists of a dual articulating 3.3" twist lock suction cup base, double socket arm, and universal X-Grip® cradle for 12" Tablets. The dual articulating suction cup base is an amazing innovation in suction cup mounting. With the ability to independently articulate each suction cup, this mounting base can be used in a variety of applications such as curved windows and surfaces. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip® cradle is compatible with devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
The RAM-B-189-TAB3U consists of a double 3.3" twist lock suction cup base, double socket arm, round base adapter and Tab-Tite™ universal clamping cradle. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The spring loaded Tab-Tite™ cradle makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
