<div>The RAM-B-108BU consists of a B size 1" rubber ball connected at a right angle to a V-shaped base, and accommodates rails from 1" to 2.1" in diameter. To mount the RAM-B-108BU base, place the saddle-shaped plate on the rail and then wrap the metal clamp strap around the rail and plate. Tighten the knob on the metal strap with a screwdriver until it has a firm hold on the rail. The RAM-B-108BU is an alternative mounting base for Beechcraft airplanes with a “throw over yoke."</div><div><br></div>
The RAP-B-200-12U composite double socket swivel arm consists of double B size 1" diameter open ball sockets with a 360-degree rotation point at the center of the arm. With open ball sockets at each end, attach RAM® B size ball components for unsurpassed adjustability.
The RAM® vehicle dock with GDS Technology is a spring loaded, quick release cradle that offers a secure fit with easy access to the mounted tablet. This docking station is compatible with the Apple iPad mini 4 with IntelliSkin . The integrated GDS Technology platform enables data and charging capabilities to the mounted tablet. Without the need to remove the IntelliSkin from the device, the user can quickly and efficiently mount the device in the vehicle dock and keep the device charged.
<div>The RAM® Universal Vehicle Phone Dock with GDS Technology™ is a spring loaded, quick release cradle that offers a secure fit with easy access to the mounted phone or phablet. This docking station is compatible with any phone or phablet wrapped in IntelliSkin®. The integrated GDS Technology™ platform enables charging of the mounted device and safely secures the phone in a variety of vibration application. Without the need to remove the IntelliSkin® from the device, the user can quickly and efficiently mount the device in the vehicle dock and keep the device charged.</div><div><br></div>
<div>The RAM-HOL-UN7-BALLU consists of a 1" diameter rubber ball and hardware for attaching to the back of the RAM-HOL-UN7U cradle.</div><div><br></div>
<div>The RAP-274-1-UN7U consits of RAM® EZ-ON/OFF™ dual strap base and the popular spring-loaded RAM® X-Grip® phone holder, featuring an 'X' design that expands and contracts to provide a perfect fit for your device – even if it's in a case. Made of high-strength composite and stainless steel, the RAM® X-Grip® phone holder is compatible with a wide variety of RAM® double socket arms and mounting bases. This version of the RAM® X-Grip® fits phones ranging from 1.87" to 3.25" in width and keeps your device completely functional and accessible. Adjust the zip ties for attachment to a variety of rails, from a minimum of .5" in diameter. For outdoor applications – like being used as a bicycle phone mount – the RAM® X-Grip® includes a device tether that is recommended for added security and peace of mind.</div><div><br></div>
<div>If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip® has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant cradle is ready to compliment your phone and become the most useful accessory in your vehicle. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.</div><div><br></div>
<div>The popular spring-loaded RAM® X-Grip® phone holder features an 'X' design that expands and contracts to provide a perfect fit for your device – even if it's in a case. Made of high-strength composite and stainless steel, the RAM® X-Grip® phone holder is compatible with a wide variety of RAM® double socket arms and mounting bases. This version of the RAM® X-Grip® fits phones ranging from 1.87" to 3.25" in width and keeps your device completely functional and accessible. No matter what double socket arm and mounting base you pair the RAM® X-Grip® with, RAM® ball and socket technology allows for near-infinite adjustability to achieve the ideal viewing angle – while also extending the life of your phone by providing shock and vibration damping. For outdoor applications – like being used as a motorcycle phone mount – the RAM® X-Grip® includes a device tether that is recommended for added security and peace of mind.</div><div><br></div>
<div>The RAP-B-121-238U, universal glare shield/yoke mount, is ideally suited for a day on the wing and yet easily removed for travel in the flight bag. Both strong and lightweight, this new clamping base is perfect for numerous electronic devices commonly found in the cockpit. Modular in design, switch out the clamps for a perfect fit no matter what the mounting surface, or add a second ball to mount another device; brilliant. Crafted to hold firm to most glare shields, yokes, or tubing, practically any aircraft can benefit from this product. Simple to use and exceptionally versatile, RAM has created another "must have" for any pilot. Once you have had a chance to use this great little device, we are confident you'll find uses for it no matter what you fly, drive, or ride. With everything you get in this package, you may even find yourself using your new RAM Mount on a golf cart, work bench, or even exercise equipment. With RAM, there are no limits. The RAP-B-121-238U fits rails or edge lips from 0.625" to a maximum of 1.25". The mounting base can also accept a second ball (RAP-B-121BBU) giving you the ultimate double ball base.</div><div><br></div>
The RAM-B-102U-A consists of a short double socket arm and two diamond bases. The diamond bases measure 2.43" x 1.31" diamond base and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond bases will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm.
The RAM ROD® 2000 fishing rod holder is RAM’s original rod holder. This unique design offers quick removal of the rod when a fish is on, and features a securing flip-over bail for rod security while trolling or for use as rod storage. Utilizing two RAM patented 1.5” balls, this rod holder offers the ultimate in adjustability and versatility. Ideally suited for kayaks or traditional fishing vessels, this rod holder puts the rod and reel where you need it. Kit includes a 1.5" ball with a 2.5" diameter mounting base.
<div>The stem mount hardware pack provides the hardware needed to install your Fork Stem Motorcycle base on a new bike. The pack includes a rubber expansion plug, plastic washers, lock washers, a screw and nut. This hardware pack allows for installation of the Fork Stem Motorcycle base into the cylindrical bore wall of fork stems that measure from 12 - 38mm (.5" - 1.49").</div><div><br></div>
<div>The RAM-B-347U-BT base consists of a 1" diameter rubber ball connected at right angles to a 2" x 1.7" square base. The base contains four pre-drilled 7mm holes at each corner.</div><div><br></div>
<div>The RAM-B-237U universal camera and camcorder base consists of a B size 1" rubber ball connected to a 1/4"-20 camera thread. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on digital cameras, camcorders, and other devices.</div><div><br></div>
<div>The RAM-347U consists of a 1.5" diameter rubber ball connected at right angles to a 2" x 1.7" rectangle base. The base has four pre-drilled holes at each corner, making the universal AMPS hole pattern.</div><div><br></div>
<div>The RAP-B-347U base consists of a 1" diameter rubber ball connected at right angles to a 2" x 1.7" square base. The base has four pre-drilled holes at each corner, making the universal 1.5 x 1.188 (hole spacing) AMPS hole pattern.</div><div><br></div>
The RAP-B-202U contains a 1" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern.
<div>The RAM-202U-RYM1 consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base. The base has pre-drilled holes, including the universal AMPs hole pattern. Included are (3 quantity) (#8-32 x 3/4" PH PD Mach Screws) and (3 quantity) (#8-32 SS Nylock Nuts) that will connect the RAM-202U-RYM1 to the bottom of all Raymarine® Dragonfly™ Sonar/GPS devices.</div><div><br></div>
This kit contains a drill-down horizontal base, a 6 inch swing arm with an open end that will accommodate any of our 1.5 inch ball bases like RAM-202U or RAM-111BU.
<div>If you are looking for a mounting solution that is fast, simple, and won't mark up your handle bar, this is it. Don't waste your time looking for something better because this is the best. The RAM EZ-Strap™ installs in seconds and grips tubing, square rails and irregular shapes like a Python. This gem of a mount is ideally suited for smaller electronic devices like the Garmin nuvi, and other similar devices. Attach devices to your motorcycle, bicycle, atv, golf cart and more. The RAM EZ-Strap™ is extremely strong and low cost. The RAM EZ-Strap™, with RAM-to-RAM SHORT double ball, can be cut to fit tubing, square rails and irregular shapes from 0.5" to 2.58" in diameter. The EZ-Strap™ will attach to the RAP-SB-238FU, creating a mounting point for your cradle. The overall length of the SHORT arm adapter is 1.43". This mount rotates 180 degrees.</div><div><br></div>
<div><span style="font-size: medium; font-weight: bold;">RAM® EZ-Strap™ siini kinnitus topeltkuuli ja teemantaluse adapteriga</span></div><div><span style="font-size: medium;"><br></span></div><div><span style="font-size: medium;">Kui otsite paigalduslahendust, mis on kiire, lihtne ja ei märgi käepidemele, siis see on see. Ärge raisake oma aega millegi parema otsimisele, sest see on parim. RAM EZ-Strap™ paigaldatakse sekunditega ja haarab torudest, kandilistest siinidest ja ebakorrapärastest kujunditest nagu Python. See kinnituse pärl sobib ideaalselt väiksematele elektroonikaseadmetele, nagu iPod, iPhone, GPS ja muud sarnased seadmed. Kinnitage seadmed oma mootorratta, jalgratta, ATV, golfikäru ja muu külge. RAM EZ-Strap™ on äärmiselt tugev ja odav. Tõenäoliselt ostate ühe sõbrale ja mitu endale. See lisand RAM-i paigaldustoodete sarjale on kindlasti fännide lemmik.</span></div><div><span style="font-size: medium;"><br></span></div><div><span style="font-size: medium;">RAM EZ-Strap™ kahe kuuliga SHORT varrega saab lõigata nii, et see sobiks torude, kandiliste siinide ja ebakorrapäraste kujunditega läbimõõduga 0,5-2,58 tolli. EZ-Strap™ kinnitus kinnitub otse RAM-i kinnitusalustele, millel on teemantadapteriga sobiv avamuster. See alus pöörleb 180 kraadi.</span></div><div><span style="font-size: medium;"><br></span></div><div><span style="font-size: medium; font-weight: bold;">Rööpa mõõtmed:</span></div><div><span style="font-size: medium;">0,5" kuni 2,58"</span></div><div><span style="font-size: medium;"><br></span></div><div><span style="font-size: medium;"><span style="font-weight: bold;">KAASAS RIISTVARA </span>– montaažiriistvara</span></div><div><span style="font-size: medium;"><span style="font-weight: bold;">KLAMBRIVAHEND </span>- 0,5" - 2,58" läbimõõt</span></div><div><span style="font-size: medium;"><span style="font-weight: bold;">AUKUMUSTER </span>– 2-auguline AMPS: 1,912"</span></div><div><span style="font-size: medium;"><span style="font-weight: bold;">PALLI SUURUS</span> – RAM Snap-Link (3/4")</span></div><div><span style="font-size: medium;"><span style="font-weight: bold;">KAALKAALUS </span>– 0,5 naela</span></div><div><span style="font-size: medium;"><span style="font-weight: bold;">MATERJALID</span> – ülitugev komposiit</span></div><div><span style="font-size: medium;"><span style="font-weight: bold;">PAKENDI TÜÜP</span> - polükott</span></div><div><span style="font-size: medium;"><span style="font-weight: bold;">KAAL </span>- 0,2 naela.</span></div>
<div>The RAP-SB-187-UN7U consists of the RAM EZ-Strap™ base, double ball SHORT arm and universal X-Grip® cradle. The strap can be cut to fit tubing, square rails and irregular shapes from 0.5" to 2.58" in diameter. Multiple adjustment points allow you to move the universal X-Grip® cradle to your optimum viewing position. This mount rotates 180 degrees. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.</div><div><br></div>
<div>For anyone who needs more versatility from their GoPro® mounting solution, look no further than the RAM® ball adapter for GoPro® mounting bases. Utilizing the RAM® ball and socket mounting system, simply attach the included B size 1” rubber ball adapter to the GoPro® base for enhanced adjustability and superior vibration damping – letting you get the most out of your favorite action camera.</div><div><br></div>
The RAM-B-202-GOP1-201U consists of a 1" diameter standard length double socket arm and 1" diameter ball with custom GoPro® Hero adapter. The GoPro® Hero adapter attaches directly to the underside of the camera, replacing the factory mounting bracket.
<div>The RAM-B-120BU RAM Mount Large Marine Grade Aluminum Side Clamping Cradle is designed to hold a large amount of different kinds of electronic devices. The cradle is constructed with a 1.0 inch diameter B size ball built into the cradle backing for connecting to a C size socket RAM arm.</div><div><br></div>
