ikka.ee

• Ratcheting locking system available on all multipliers except the ones with a 5:1 multiplying factor <br>• Range covers max output torque up to 9,500 N·m <br>• Always use with torque wrench (CW and ACW) to avoid exceeding the maximum torque of the multiplier <br>• Accuracy ±4% <br>• The ratcheting locking system contains the forces generated during tightening which makes it easy to do what would otherwise be difficult, dangerous or even impossible <br>• Supplied with a straight reaction plate with adjustable reaction point <br>• Supplied in a portable fabric bag up to 3,400 N·m and in rigid case with wheels on sizes above <br>• Made in the UK

• Double speed hydro-pneumatic pump controlled by pedal with built-in safety overload valve<br>• Sturdy welded frame with exclusive rounded shapes design<br>• Large pressure gauge with glycerine for easy reading at convenient eye level<br>• Slide and piston chrome plated<br>• Easy raising and lowering of the press table thanks to the winch with swivel handle<br>• Rulers to facilitate centring the piston on the item to be extracted<br>• Two V-blocks with handles included, usable on V or flat side depending as needed<br>• Auto-centring table pins incorporating “butterfly” locks to keep them engaged for greater safety<br>• All handles insulated<br>• Pressing pin set with 8 pins and a punch plate included.<br>• Tool tray at the bottom<br>• Working pressure: 7.5-8.5 bar 0.75-0.85 MPa Air connection: 1/4" NPT<br>• CE certified by Official Independent Technical Inspection Association

• Heavy duty 40" tool trolley composed of 8 drawer C75 trolley plus 4 drawer E85 top chest plus foam assortment<br>• Lock&Go latching system prevents drawers from opening when the trolley is being moved<br>• Fully opening drawers with aluminium trim<br>• Scratchproof powder coating<br>• Sturdy steel construction: The double walled case is strengthened with strategically positioned welds<br>• A solid handle that can be fixed in both side of the trolley<br>• Strong and secure cylindrical locking system protects the trolley against theft<br>• Noiseless rubber wheels 150x50 mm with 2 brakes ensure maximum stability: 2 fixed and 2 swivel with brake<br>• Replace the standard anti-slip rubber top with stainless steel, MDF or chestnut to meet the needs of every job<br>• Contents: FF1BSET-MONSTER set

• Torque multiplier, slim line<br>• To be used in narrow places<br>• Accuracy +/- 4%<br>• Reaction arm included<br>• Supplied in a leather case

• Heavy duty 53" tool trolley composed of 7 drawer trolley plus foam assortment<br>• Complete 53" foam laser marked inlays and drawers to hold extra large tools<br>• The unique 1DAAT system ensures that only one drawer can be opened at a time, avoiding any risk of tilting<br>• Lock&Go latching system prevents drawers from opening when the trolley is being moved<br>• Fully opening drawers with aluminium trim<br>• Scratchproof powder coating<br>• Double walled to ensure that the drawers still open after collision damage to the outer wall<br>• Sturdy steel construction: the double walled case is strengthened with strategically positioned welds<br>• Sturdy handle can be fitted on either side of the trolley<br>• Strong and secure cylindrical lock system protects the trolley against theft<br>• Noiseless rubber wheels 150x50 mm with two brakes ensure maximum stability: Castors (2 fixed and 2 swivel with brake)<br>• Replace the standard anti-slip rubber top with stainless steel or wood to meet the needs of every job<r>• Add a variety of accessories to the side

• Heavy duty tool trolley composed of 9 drawers E77 trolley plus 4 drawers E87 top chest plus foam assortment<br>• Based on a sturdy steel dual-walled case construction<br>• The unique 1DAAT system ensures that only one drawer can be opened at a time, avoiding any risk of tilting<br>• Fully opening drawers with individual shock-protection corner bumpers<br>• The pivoting latching system avoids unintentional drawer opening<br>• Wheels with dual braking system secure the trolley solidly to the ground, preventing movement in any direction<br>• Unrivalled customisation possibilities thanks to perforated side panels and individual top design<br>• Xpand modular accessories system available to allow users to configure the perfect workstation<br>• Ultimate locking system with electronic access control available<br>• Scratchproof powder coating outside and inside ensures high protection against rust<br>• Dual-walled case ensures that the drawers still open after collision damage to the outer wall<br>• Replace the standard composite top with stainless steel, MDF or chestnut to meet the needs of every job<br>• Contents: FF1ASET-XLARGE set

• 8-Drawer extra-large capacity trolley<br>• Lock&Go latching system prevents drawers from opening when the trolley is being moved<br>• Fully opening drawers with aluminium trims<br>• Scratchproof powder coating<br>• Solid steel construction: The double walled case is strengthened with strategically positioned welding points<br>• Stainless steel top<br>• Noiseless rubber wheels 320 mm x 85 mm ensure maximum stability<br>• Double-walled case: If the outside wall is damaged in a collision, the double-walled case ensures that the drawers will always open<br>• Strong and secure round locking system protects the trolley against theft<br>• Add a variety of accessories to the side panels

• Ratcheting locking system available on all multipliers except the ones with a 5:1 multiplying factor <br>• Range covers max output torque up to 9,500 N·m <br>• Always use with torque wrench (CW and ACW) to avoid exceeding the maximum torque of the multiplier <br>• Accuracy ±4% <br>• The ratcheting locking system contains the forces generated during tightening which makes it easy to do what would otherwise be difficult, dangerous or even impossible <br>• Supplied with a straight reaction plate with adjustable reaction point <br>• Supplied in a portable fabric bag up to 3,400 N·m and in rigid case with wheels on sizes above <br>• Made in the UK

• 3/3 foam inlay assortment<br>• 11 foam set assortment<br>• Large assortment includes spanners, wrenches, pliers, sockets, striking and cutting tools, etc.<br>• Suitable for MONSTER trolley<br>• Contents: FF1B01, FF1B02, FF1B03. FF1B04, FF1B05, FF1B06, FF1B07, FF1B08, FF1B09, FF1B10 and FF1B11

• Torque multiplier, slim line<br>• To be used in narrow places<br>• Accuracy +/- 4%<br>• Reaction arm included<br>• Supplied in a leather case

• Dual scale N·m/ft.lb <br>• Can be used clockwise <br>• Controlled torque application events to ±4% CW <br>• Clicking system triggers a tactile and audible signal <br>• Fixed square drive head without a ratcheting mechanism for high torque application <br>• All-metal rugged, durable wrench with sealed mechanism <br>• Supplied in three pieces which need to be assembled for use and calibration <br>• Supplied with a factory declaration of conformity according to ISO 6789-1:2017<br>• Made in USA

• Heavy duty tool trolley composed of 9 drawer E77 trolley plus foam assortment<br>• Based on a sturdy steel dual-walled case construction<br>• The unique 1DAAT system ensures that only one drawer can be opened at a time, avoiding any risk of tilting<br>• Fully opening drawers with individual shock-protection corner bumpers<br>• The pivoting latching system avoids unintentional drawer opening<br>• Wheels with dual braking system secure the trolley solidly to the ground, preventing movement in any direction<br>• Unrivalled customisation possibilities thanks to perforated side panels and individual top design<br>• Xpand modular accessories system available to allow users to configure the perfect workstation<br>• Ultimate locking system with electronic access control available<br>• Scratchproof powder coating outside and inside ensures high protection against rust<br>• Dual-walled case ensures that the drawers still open after collision damage to the outer wall<br>• Replace the standard composite top with stainless steel, MDF or chestnut to meet the needs of every job<br>• Contents: FF1ASET-AUTO set

• Made of stainless steel 304<br>• Fully opening stainless steel drawers with Lock&Go latching system<br>• Strong and secure round locking system protects the tool trolley against theft<br>• Safe and smart Lock&Go system prevents the stainless steel drawers from opening when the tool trolley moves<br>• Rubber wheels ensure maximum stability, making the trolley easy to manoeuvre, even on irregular surfaces<br>• Fully opening stainless steel drawers equipped with ball-bearing sliders that glide very smoothly and have a capacity up to 30 kg<br>• Double-wall reinforced stainless steel frame with extra welding points<br>• Smooth and silent rubber wheels

• Heavy duty rigid case with 193 pieces and 3 drawers<br>• Metallic case composition aviation mechanics foam set<br>• Drawers open 100%<br>• Drawer blocking system for greater safety<br>• Reinforced aluminium cover<br>• Contents: FF3A09, FF3A10, FF3A11 & FF3A12 foams<br>• Suitable for all large airplanes<br>• 481-300 DIN hammer 300 mm, 3625N-32 plastic hammer, 2509 flexible pick-up tool 525 mm, 2535F2 magnetic pick-up tool 1 kg<br>• 7762 3/8" extension bar 250 mm<br>• 6700SM 1/4" socket hex 5.5, 6, 7, 8, 9, 10, 11, 12, 13 mm<br>• A6800DM 1/4" aerospace, long series socket 5.5, 6, 7, 8, 9, 10, 11, 12, 13 mm<br>• 6709M 1/4" socket driver hex 3, 4, 5, 6, 8 mm<br>• 6709PH 1/4" socket driver PH1, PH2, PH3<br>• 6709TORX 1/4" socket driver TORX® T8, T9, T10, T15, T20, T25, T27, T30, T40<br>• 6950SL 1/4" reversible ratchet slim head, 6954 1/4" T-handle, 6956 1/4" spinner handle, 6958 1/4" breaker bar<br>• 6960 6961/6962/6962L 1/4" extension bars 50, 100, 150, 355 mm, 6966 1/4" universal joint<br>• 6972H 1/4" bit holder, 7764 3/8" - M 1/4" adaptor<br>• 7400SM 3/8" socket short series 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22 mm<br>• A7402DM 3/8" aerospace socket long series 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm<br>• 7409M 3/8" socket driver hex 3, 4, 5, 6, 7, 8, 10 mm<br>• 7409TORX 3/8" socket driver TORX® T25, T27, T30, T40, T45, T50<br>• 7750SL 3/8" ratchet slim head, 7754 3/8" T-handle, 7758 3/8" breaker bar, 7760/7761 3/8" extension bars 75, 125 mm<br>• 7766 3/8" universal joint, 7765 adaptor F 1/4" - M 3/8", 8164-1/2 adaptor F 3/8" - M 1/2", 7407H 3/8" 1/4" - 3/8" socket holder<br>• 2058-BR 1/4" bit-ratchet, 1544 feeler gauge, 808050S ratcheting screwdriver, stubby 808050P pistol handle ratcheting screwdriver<br>• 59S/31-1 bit set, 31 pieces, Phillips, Pozidriv, TORX®, hexagon, slotted<br>• 2047-0.8-4 offset screwdriver 0.8 mm x 4 mm x 100 mm<br>• 2047PR-1-2 double offset key for Phillips screws PH1-PH2<br>• BE-8020L, BE-8030, BE-8155 ERGO™ screwdriver

• Vastupidav ümarate nurkadega konstruktsioon<br>• Suur manomeeter<br>• Kahe töökiirusega pump sisseehitatud ülekoormuse kaitseklapiga<br>• Paksu kroomikihiga liugur ja kolb<br>• Kaasas kaks V-matriitsi, kasutatavad vastavalt vajadusele V-külje või lameda küljega<br>• Automaatselt tsentreeritavad tapid laua jaoks<br>• Presstemplite komplekt kuue templi ja plaadiga<br>• Isoleeritud käepidemed<br>• Tööriistahoidik alumises osas<br>• CE-sertifitseeritud 2006/42/EÜ kohaselt<br><br>Pressi jõudlus: 50 t<br>Kaal: 309 kg

• Torque multiplier, slim line<br>• To be used in narrow places<br>• Accuracy +/- 4%<br>• Reaction arm included<br>• Supplied in a leather case

• Torque multiplier, slim line<br>• To be used in narrow places<br>• Accuracy +/- 4%<br>• Reaction arm included<br>• Supplied in a leather case

• Torque is displayed at every moment during the torque event <br>• Anti-shock protected dial with dual scale in N·m/ft.lb <br>• Can be used CW and ACW by turning the dial to the correct position <br>• Controlled torque application events to ±4% <br>• Audible and visual signal (LED + dial) alerts the user that the target torque has been achieved <br>• 1" fixed square drive <br>• Delivered in two pieces which need to be assembled for use and calibration <br>• Delivered in a sturdy metal case <br>• Supplied with a declaration of conformity<br>• Made in USA

• 7 drawer heavy duty 53" tool trolley<br>• The unique 1DAAT system ensures that only one drawer can be opened at a time, avoiding any risk of tilting<br>• Fully opening drawers with aluminium trim<br>• Scratchproof powder coating<br>• Double walled ensures that the drawers still open after collision damage to the outer wall<br>• Sturdy steel construction: the double walled case is strengthened with strategically positioned welds<br>• A solid handle that can be fixed in both side of the trolley<br>• Strong and secure cylindrical locking system protects the trolley against theft<br>• Noiseless rubber wheels 150x50 mm with 2 brakes ensure maximum stability: 2 fixed and 2 swivel with brake<br>• Add a variety of accessories to the side

• Komplektis 237 tööriista<br>• Kapi ja kuue suure sahtliga tööriistakäru<br>• Lock&Go sahtlite lukustussüsteem ei lase sahtlitel iseenesest avaneda<br>• Täielikult avanevad sahtlid, mille kuullaagersiinid libisevad väga sujuvalt ja kannavad kuni 30 kg<br>• Kriimustuskindel pulbervärvkate sees ja väljas tagab kindla kaitse rooste vastu<br>• Topeltseintega konstruktsioon tagab, et sahtlid avanevad ka juhul, kui kokkupõrge kahjustab välisseina<br>• Libisemise vastane kate käru töötasapinnal<br>• Tugev käepide, mida saab kinnitada mõlemale poole<br>• Sahtlitel tugev ja turvaline silinderlukustussüsteem<br>• Kummirattad tagavad maksimaalse stabiilsuse, muutes käru manööverdamise lihtsaks ka ebatasasel pinnal<br>• Saadaval lai valik lisavarustust

• Ratcheting locking system available on all multipliers except the ones with a 5:1 multiplying factor <br>• Range covers max output torque up to 9,500 N·m <br>• Always use with torque wrench (CW and ACW) to avoid exceeding the maximum torque of the multiplier <br>• Accuracy ±4% <br>• The ratcheting locking system contains the forces generated during tightening which makes it easy to do what would otherwise be difficult, dangerous or even impossible <br>• Supplied with a straight reaction plate with adjustable reaction point <br>• Supplied in a portable fabric bag up to 3,400 N·m and in rigid case with wheels on sizes above <br>• Made in the UK

UV-EXTREME with item no. 03.5272 and UV-EXTREME PLUS with item no. 03.5273 will be more than 3 and 6 times as powerful, respectively, as the present UV lights, and will be the far most powerful UV lights in the world!<br> Superior and most powerful LED work light in the world for very fast and highly efficient UV curing of larger paint repair areas, up to 135 x 130 cm, equivalent to the size of a car door. The UV-EXTREME work light is packed in sturdy and high-quality case that can withstand shocks and rough handling during shipment. The case have a built-in handle. When the lights are not in use, the transport case can be used to store the lamp.<br>The built-in BLUETOOTH functionality makes it safe and easy to operate the lamp remotely, even in groups of up to 4 units simultaneously. Using the APP provides safe activation from a distance to avoid being physically close to the UV curing process. <br>The automotive coatings technology is continuously developing new fast cost-effective methods for automotive body and paint repair. Utilizing UV LED curing technology allows you to work faster and more efficiently as the curing time between each operation is reduced significantly. The range of LED solutions for UV curing is applicable for curing of UV cured primers and UV cured body fillers. <br><br>*No heat is produced on the panel or the paint during the curing. <br>*Allows curing of plastic parts or any heat sensitive material. <br>*Sanding and polishing can be done immediately after the curing is completed. <br><br>Light source: UV LED<br><b>Irradiance at 10cm distance:</b><br>Curing size 34x24cm: Min. irradiance: >120mW/cm2 / Center irradiance: 490mW/cm2<br><b>Irradiance at 40cm distance:</b><br>Curing size 110x100cm: Min. irradiance: >6mW/cm2 / Center irradiance: 68mW/cm2<br><b>Irradiance at 80cm distance:</b><br>Curing size 135x130cm: Min. irradiance: >6mW/cm2 / Center irradiance: 18mW/cm2<br>Curing area: 640cm2 at 10cm distance / 8600cm2 at 40cm distance / 13000cm2 at 80cm distance <br>Wavelength: 395-400nm<br>Protection class: IP30 / IK08<br>Cable: 5 m / 2x1.0 mm2 H05RN-F <br>Impact resistance: 1m<br><br>Suitable wheel stand: 03.5682

• Komplektis 428 tööriista<br>• Seitsme sahtliga vastupidav tööriistakäru, terasest topeltseintega konstruktsioon<br>• Täielikult avanevad sahtlid, mille kuullaagersiinid libisevad väga sujuvalt ja kannavad kuni 30 kg<br>• Kummirattad tagavad maksimaalse stabiilsuse, muutes käru manööverdamise lihtsaks ka ebatasasel pinnal<br>• Perforeeritud küljepaneelid võimaldavad lisada erinevaid Xpand-sarja tarvikuid<br>• Sahtlitel tugev ja turvaline silinderlukustussüsteem<br>• Kriimustuskindel pulbervärvkate sees ja väljas tagab kindla kaitse rooste vastu<br>• Põrkekaitsmed nurkadel viivad miinimumini õnnetuste ja ümbritsevate esemete kahjustamise ohu<br>• Topeltseintega konstruktsioon tagab, et sahtlid avanevad ka juhul, kui kokkupõrge kahjustab välisseina<br>• Mõõdud: 952 x 510 x 782 mm

• Tugev konstruktsioon tagab vastupidavuse<br>• Käepideme PU-kate aitab vältida sõiduki kriimustamist <br>• Pehme kattega transpordikäepide<br>• Eriti suured ja paksud PU-rattad ületavad hõlpsasti kõik takistused<br>• Kaasas on kaks adapterit tõstekõrguse suurendamiseks:<br>• - 45 mm<br>• - 75 mm<br>• Kaal: 106 kg<br>• Kaitseklapp hoiab ära ülekoormuse<br>• Sertifitseeritud 2006/42/EÜ + BS EN1494 kohaselt<br><br>Tõstevõime: 80000 kg<br>Õhu sisselase: 1/4“<br>Rõhk baarides: 9–12 baari<br>Vähim kõrgus: 230 mm<br>Suurim kõrgus: 443 mm<br>Suurim kõrgus ühe astmega: 341 mm / 50 t<br>Suurim kõrgus kahe astmega: 443 mm / 80 t <br>Kaal: 106 kg

• Indestructible injection-moulded copolymer polypropylene tool case filled with tools<br> • Ideal for use in harsh environments such as industrial, aerospace and nautical<br> • For work on live equipment up to 1000 volts<br> • Wide range of insulated tools manufactured according to IEC 60900 included<br> • Up to 3 layer colour insulating coating with dipped or injection moulded insulation<br> • Reinforced angles and ribs for maximum protection<br> • Corrosion, water and dust proof - all parts are Skydrol resistant<br> • Extremely resistant to very low and high temperature: -33° to 90°<br> • Airtight PU injected O-ring seal<br> • 60x37 wheels on ball bearings for easy transport even when heavily loaded<br> • 1 retractable handle for rolling on wheels<br> • 1 rubber coated heavy duty handle<br> • 2 PP resin foldable handles on sides for transporting with 2 persons<br> • Integrated identification/name badge<br> • Padlockable<br> • 4 closing latches, 4 bottom studs

• 6 drawer extra large capacity black trolley filled with tools and with cabinet<br>• Lock&Go latching system prevents drawers from opening when the trolley is being moved<br>• Fully opening 30 kg capacity drawers equipped with ball-bearing slides for smooth opening<br>• Scratchproof powder coating<br>• Double walled case ensures that the drawers still open after collision damage to the outer wall<br>• Sturdy steel construction: the double walled case is strengthened with strategically positioned welds<br>• Anti-slip rubber worktop<br>• A solid handle that can be fixed in both side of the trolley<br>• Strong and secure cylindrical locking system protects the trolley against theft<br>• Noiseless rubber wheels 150x50 mm with 2 brakes ensure maximum stability: 2 fixed and 2 swivel with brake<br>• Add a variety of accessories to the side panels<br>• Replace the standard anti-slip rubber top with stainless steel, MDF or chestnut to meet the needs of every job<br>• Contents: FF1A65, FF1A66, FF1A67, FF1A68 and FF1A194 foams

• Ready to work at height<br>• 113 tools for working at height and 1 accessory for storage<br>• TAH1177-SCRIBE high-performance alloy steel scribers<br>• TAH2820EF2 folding pocket knife<br>• TAH6960, TAH6961, TAH6962 and TAH6962L 1/4" extension bars<br>• TAHBE-8630 Phillips head screwdrivers<br>• MTS-5-25 Measuring tape<br>• TAH08-5.5, TAH08-8, TAH08-10 1/4" non-impact sockets<br>• TAH111M-6, -7, -8, -9, -10, -11, -12, -13, -14, -15, -17, -18, -19, -21, -22, -24, -27, -30, -32 combination spanners<br>• TAH1150-1/2H/P Vernier callipers<br>• TAH1544 feelers gauges<br>• TAH2047-0.8-4 double offset keys<br>• TAH2047PR-1-2 Phillips offset screwdrivers<br>• TAH2427G-200 and TAH2430G-200 long nose pliers<br>• TAH2484-30 pry bars<br>• TAH2509 and TAH2535F2 flexible pick-up tools<br>• TAH2628G-160 pliers<br>• TAH3625W-35 round mallets<br>• TAH3734BM-3 and TAH3755BM-4, TAH3734BM-5, TAH3734BM-8 punch parallel pin<br>• TAH481-300 lump hammers<br>• TAH6950 socket wrenches<br>• TAH6956-1 1/4" square spinners<br>• TAH6958B-1 and TAH8158B-1 breaker bars<br>• TAH6966 universal joint<br>• TAH8150-1/2 socket wrench<br>• TAH8160 1/2" extension bars<br>• TAH8166 1/2" socket wrenches<br>• TAH8224 slip joint spanners<br>• TAH9070 adjustаble spanners<br>• TAHBE-8020L, -8040S, -8155, -8260, -8030, -8050S and -8220S screwdrivers<br>• TAHBE-8610, -8610S, -8620S, -8620 Phillips screwdrivers<br>• TAHBE-8810, -8830, -8820 Pozidriv screwdrivers<br>• TAHBE-9777B 7 folding hexagon L-key set<br>• TAHSCB140G steel cable cutting scissors<br>• TAH08-6, -7, -9, -11, TAH16-H8, -T55, TAH16B-10, -11, -12, -14, -15, -16, -17, -18, -19, -21, -22, -24 non-impact hex sockets<br>• TAH08-12, TAH08-13 non-impact hex sockets<br>• TAH16-H5, -H6, -H7, -H10, -H14, -H17, -T40, -T45, -T50, -T60, TAH16B-13 1/2" square socket drivers<br>• TAH2101G-160 pliers<br>• TAH8162 extensions<br>• TAH9072 adjustаble spanners<br>• 4750RCHDW02 HD rigid case<br>• TAHPINRELEASER pin releaser<br>• According to the standards defined by

• 3200 cranking amps at 12V and 1600 cranking amps at 24V, heavy duty booster<br>• Powered by two lead-acid AGM spiral batteries with pure lead plates, extremely effective in delivering high power at high cranking amperage almost instantaneously<br>• Extremely powerful<br>• Cranking amps: 12V: 3200A / 24V: 1600A<br>• Suitable and specifically designed for heavy duty vehicles, such as buses, trucks or tanks<br>• Heavy duty construction<br>• Equipped with heavy duty, fully insulated clamps with wide 54 mm opening, able to transfer full current to the battery that needs boosting<br>• High quality double insulated starter cables, 1.95 metres long with 70 mm² wire cross-section, featuring optimal length, flexibility and extremely high conductivity<br>• Clamps equipped with a copper bridge for reliable current spreading on both bronze jaws<br>• The connector for ѕelecting either 12V or 24V is made from the most robust industrial connectors on the market and equipped with a very comfortable handle<br>• Equipped with a very easy and intuitive control panel with a voltmeter, a 16A external fuse and a 12VDC socket-outlet<br>• Provided with a smart charger that is 100% fully automatic and microprocessor controlled to allow multiple charging steps for added accuracy, safety and increase battery life<br>• Multiple safety features<br>• Reverse polarity protection<br>• Equipped with a 500A fuse for protection against short-circuits or over-long starting attempts<br>• Monolithic construction made of roto-moulded polyethylene, nearly unbreakable and resistant to all fluids used in garages, including brake fluid<br>• Features a gas release safety valve that prevents gas accumulation and drastically reduces the risk of explosion<br>• Operating temperature: -20°C < / < 50°C<br>• CE certified

• Vastupidav ümarate nurkadega konstruktsioon<br>• Suur manomeeter<br>• Kahe töökiirusega pump sisseehitatud ülekoormuse kaitseklapiga<br>• Paksu kroomikihiga liugur ja kolb<br>• Kaasas kaks V-matriitsi, kasutatavad vastavalt vajadusele V-külje või lameda küljega<br>• Automaatselt tsentreeritavad tapid laua jaoks<br>• Presstemplite komplekt kuue templi ja plaadiga<br>• Isoleeritud käepidemed<br>• Tööriistahoidik alumises osas<br>• CE-sertifitseeritud 2006/42/EÜ kohaselt<br><br>Pressi jõudlus: 30 t<br>Kaal: 189 kg

• Heavy duty rigid case with 137 pieces and 3 drawers<br>• Metallic case composition aviation mechanics foam set<br>• Drawers open 100%<br>• Drawer blocking system for greater safety<br>• Reinforced aluminium cover<br>• Contents: FF3A14, FF3A15, FF3A16 and FF3A17 foams<br>• Consists of sockets, wrenches, screwdrivers, pliers, punches, 1/4", 3/8" sizes<br>• Suitable for all large airplanes

• Windpower composition developed together with Danish Windpower Academy<br>• Manufactured with structure of polypropylene copolymer resin<br>• Air pressure valve for maximum protection against extreme weather conditions<br>• Double robust bolt system for hermetic sealing<br>• TSA-approved padlock<br>• Sockets, wrenches, pliers, screwdrivers and landyards<br>• 167 tools<br>• 4750RCHDW02 heavy-duty hardware rigid case with wheels<br>• Heavy duty rigid case with wheels<br>• Includes 6700SM socket 1/4", aerospace, short series 5.5, 6, 7, 8, 9, 10, 11, 12, 13 mm<br>• 6954 T-handle, 6956 1/4" spinner handle<br>• 6958 breaker bar, 6960, 6962, 6962 1/4" extension 50 mm, 6961 1/4" extension, 6962L 1/4" extension bar 355 mm<br>• 6966 universal joint, 6972H 1/4" power socket holder, 6950SLL 1/4" ratchet slim head<br>• 7800SM 1/2" socket short series 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27, 30, 32 mm<br>• 7809M 1/2" socket driver hex 5, 6, 7, 8, 10, 12, 14, 17, 19 mm<br>• 7809TORX 1/2" socket driver TORX® T40, T45, T50, T55, T60<br>• 8150SL 1/2" ratchet slim head 72T, 8154-1/2 1/2" T-handle<br>• 8160-1/2, 8162-1/2, 1/2" extension<br>• 8165-1/2 1/2" adaptor, 8166-1/2 1/2" universal joint, Inlay 02<br>• 111M combination wrench 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27, 30, 32 mm<br>• Inlay 03 foam w/ wrenches<br>• BE-9770 black hex L-key set, long ball end 9 pieces, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm<br>• 1177-SCRIBE, 6M-10-11, 6M-12-13, 6M-14-15 open end wrench<br>• 6M-16-17 adjustable wrench 9070 6", 6M-18-19 adjustable wrench 9072, 6M-20-22 offset scriber 230 mm<br>• 6M-24-27, 6M-30-32, 6M-6-7, 6M-8-9 combination wrench<br>• Specifically developed for repair and maintenance on Siemens and Vestas Windmills<br>• Heavy-duty box with special tools to be used in certain applications

• Heavy duty rigid case<br>• Manufactured with structure of polypropylene copolymer resin<br>• Air pressure valve for maximum protection against extreme weather conditions<br>• Double robust bolt system for hermetic sealing<br>• TSA-approved padlock<br>• Identification handle and plate<br>• Handle locking system<br>• Includes 159 pieces<br>• Sockets, wrenches, files, screwdrivers and pliers<br>• Foam codes: FF2A07, FF2A08, FF2A09 & FF2A10

• Heavy duty rigid case with 153 pieces and 3 drawers<br>• Metallic case composition aviation mechanics foam set<br>• Drawers open 100%<br>• Drawer blocking system for greater safety<br>• Reinforced aluminium cover<br>• Contents: FF3A05, FF3A06, FF3A07 & FF3A08 foams<br>• Consists of sockets, wrenches, screwdrivers, pliers, punches, 1/4", 3/8" sizes<br>• Suitable for all large airplanes

• Includes 196 pieces<br>• 5 foam set composition for automotive application<br>• Large composition includes 1/4" and 1/2" socket drivers, combination and ring end wrenches, slotted, PH and TORX® screwdrivers<br>• Compatible with all trolleys<br>• Suitable for all vehicle garages<br>• Includes FF1A19 + FF1A20 + FF1A21 + FF1A22 + FF1A23

• Heavy duty tool trolley composed of 7 drawer E72 trolley plus foam assortment<br>• Fully opening drawers equipped with ball-bearing slides for smooth motion with load capacity up to 30 kg<br>• Rubber wheels ensure maximum stability, making the trolley easy to manoeuvre even on irregular surfaces<br>• Perforated side panels allow users to add various Xpand accessories<br>• Strong and secure cylindrical locking system protects the tool trolley against theft<br>• Scratchproof powder coating outside and inside ensures high protection against rust<br>• Shock protection corner bumpers minimise the risk of injuries and damage to surrounding objects<br>• Dual-walled case ensures that the drawers still open after collision damage to the outer wall<br>• Replace the standard anti-slip rubber top with stainless steel, MDF or chestnut to meet the needs of every job<br>• Contents: FF1ASET-LARGE set

• Suitable for both BE200 and BE210<br>• 25 mm to 14 mm cable diameter<br>• 10 m to 3 m cable length<br>• Made of different materials: semi rigid (a), flexible (b), plumbing spring cable

• Heavy duty rigid case with wheels<br>• Aviation mechanics, especially for mobile application and suitable for all airplanes<br>• Manufactured with structure of polypropylene copolymer resin<br>• Air pressure valve for maximum protection against extreme weather conditions<br>• Double robust bolt system for hermetic sealing<br>• TSA-approved padlock<br>• Includes 240 pieces<br>• Sockets, screwdrivers, pliers, sizes: 1/4"; 3/8" etc.<br>• Foam codes: FF2B01, FF2B02, FF2B03, FF2B04, FF2B05 & FF2B06<br>• 4750RCHDW01 heavy-duty hardware rigid case with wheels<br>• Especially for line maintenance

• Set includes 256 pieces of 7-foam set MRO composition<br>• FF1A130: 1/2" sockets and accessories<br>• FF1A131: cutting and striking tool<br>• FF1A132: mix tools<br>• FF1A133: screwdrivers<br>• FF1A134: combination spanners<br>• FF1A135: open end and flex head wrenches<br>• FF1A136: mix socket, pliers and screwdrivers

• High elevation hydro-pneumatic jack specially designed for vehicles with higher lifting points, such as agricultural vehicles<br>• 30T maximum load capacity<br>• 627 mm maximum achievable elevation height<br>• Heavy duty design ensures durability and long tool life<br>• The support wheel located on the lever prevents injuries when positioning<br>• PU protection on the steel lever helps prevent scratches to the vehicle<br>• Soft grip transport handle<br>• Extra-large steel+rubber castors easily overcome any obstacle and increase manoeuvrability<br>• Three height adaptors included, 45, 100 and 250 mm, to increase the possible elevation<br>• Safety pressure valve system prevents overloading<br>• CE certified by Official Independent Technical Inspection Association