Saadavus | ||||
|---|---|---|---|---|
Saeleht HSS 550x50x2.50mm 8TPI KASTO masinatele Tootekood: 3802-550-50-2.50-8-KA Masinsaelehed • Designed with holes for KASTO machines<br>• Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 76,65 € | Poodi |
Saeleht HSS 550x50x2.50mm 8TPI Tootekood: 3802-550-50-2.50-8 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 76,77 € | Poodi |
Saeleht HSS 550x50x2.50mm 6TPI Tootekood: 3802-550-50-2.50-6 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time | Tarne 14 tööpäeva | 76,65 € | Poodi | |
Saeleht HSS 550x50x2.50mm 4TPI KASTO masinatele Tootekood: 3802-550-50-2.50-4-KA Masinsaelehed • Designed with holes for KASTO machines<br>• Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 76,65 € | Poodi |
Saeleht HSS 550x50x2.50mm 4TPI Tootekood: 3802-550-50-2.50-4 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 76,65 € | Poodi |
Saeleht HSS 550x50x2.50mm 10TPI Tootekood: 3802-550-50-2.50-10 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 76,65 € | Poodi |
Saeleht HSS 525x38x2.00mm 8TPI Tootekood: 3802-525-38-2.00-8 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 50,06 € | Poodi |
Saeleht HSS 525x38x2.00mm 6TPI Tootekood: 3802-525-38-2.00-6 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 49,95 € | Poodi |
Saeleht HSS 525x38x2.00mm 10TPI Tootekood: 3802-525-38-2.00-10 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 49,95 € | Poodi |
Saeleht HSS 500x50x2.50mm 6TPI Tootekood: 3802-500-50-2.50-6 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 72,51 € | Poodi |
Saeleht HSS 500x50x2.50mm 4TPI Tootekood: 3802-500-50-2.50-4 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 72,51 € | Poodi |
Saeleht HSS 500x45x2.25mm 10TPI Tootekood: 3802-500-45-2.25-10 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 61,37 € | Poodi |
Saeleht HSS 500x38x2.00mm 8TPI Tootekood: 3802-500-38-2.00-8 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 47,96 € | Poodi |
Saeleht HSS 500x38x2.00mm 4TPI Tootekood: 3802-500-38-2.00-4 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 47,96 € | Poodi |
Saeleht HSS 500x38x2.00mm 10TPI Tootekood: 3802-500-38-2.00-10 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 47,96 € | Poodi |
Saeleht HSS 500x38x2,0mm 6TPI Tootekood: 3802-500-38-2.00-6 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 47,96 € | Poodi |
Saeleht HSS 475x38x2.00mm 8TPI Tootekood: 3802-475-38-2.00-8 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 41,18 € | Poodi |
Saeleht HSS 450x38x2.00mm 8TPI KASTO masinatele Tootekood: 3802-450-38-2.00-8-KA Masinsaelehed • Designed with holes for KASTO machines<br>• Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 40,92 € | Poodi |
Saeleht HSS 450x38x2.00mm 8TPI Tootekood: 3802-450-38-2.00-8 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 40,92 € | Poodi |
Saeleht HSS 450x38x2.00mm 6TPI KASTO masinatele Tootekood: 3802-450-38-2.00-6-KA Masinsaelehed • Designed with holes for KASTO machines<br>• Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 40,92 € | Poodi |
Saeleht HSS 450x38x2.00mm 4TPI KASTO masinatele Tootekood: 3802-450-38-2.00-4-KA Masinsaelehed • Designed with holes for KASTO machines<br>• Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 40,92 € | Poodi |
Saeleht HSS 450x38x2.00mm 4TPI Tootekood: 3802-450-38-2.00-4 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 40,92 € | Poodi |
Saeleht HSS 450x38x2.00mm 10TPI KASTO masinatele Tootekood: 3802-450-38-2.00-10-KA Masinsaelehed • Designed with holes for KASTO machines<br>• Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 40,92 € | Poodi |
Saeleht HSS 450x38x2,0mm 6TPI Tootekood: 3802-450-38-2.00-6 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 40,92 € | Poodi |
Saeleht HSS 450x38x2,0mm 10TPI Tootekood: 3802-450-38-2.00-10 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 40,92 € | Poodi |
Saeleht HSS 450x32x1.60mm 6TPI Tootekood: 3802-450-32-1.60-6 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 30,48 € | Poodi |
Saeleht HSS 450x32x1.60mm 4TPI Tootekood: 3802-450-32-1.60-4 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 30,51 € | Poodi |
Saeleht HSS 450x32x1.60mm 14TPI Tootekood: 3802-450-32-1.60-14 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 30,48 € | Poodi |
Saeleht HSS 450x32x1.60mm 10TPI Tootekood: 3802-450-32-1.60-10 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 30,48 € | Poodi |
Saeleht HSS 425x32x1.60mm 6TPI Tootekood: 3802-425-32-1.60-6 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 28,81 € | Poodi |
Saeleht HSS 425x32x1.60mm 10TPI Tootekood: 3802-425-32-1.60-10 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 29,40 € | Poodi |
Saeleht HSS 400x38x2.00mm 6TPI Tootekood: 3802-400-38-2.00-6 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 32,64 € | Poodi |
Saeleht HSS 400x38x2.00mm 4TPI Tootekood: 3802-400-38-2.00-4 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 32,64 € | Poodi |
Saeleht HSS 400x38x2.00mm 10TPI Tootekood: 3802-400-38-2.00-10 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 32,64 € | Poodi |
Saeleht HSS 400x32x1.60mm 8TPI Tootekood: 3802-400-32-1.60-8 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 24,26 € | Poodi |
Saeleht HSS 400x32x1.60mm 6TPI Tootekood: 3802-400-32-1.60-6 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 24,26 € | Poodi |
Saeleht HSS 400x32x1.60mm 4TPI Tootekood: 3802-400-32-1.60-4 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 24,26 € | Poodi |
Saeleht HSS 400x32x1.60mm 14TPI Tootekood: 3802-400-32-1.60-14 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 24,26 € | Poodi |
Saeleht HSS 400x32x1.60mm 10TPI Tootekood: 3802-400-32-1.60-10 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 24,26 € | Poodi |
Saeleht HSS 400x25x1.25mm 6TPI Tootekood: 3802-400-25-1.25-6 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 18,64 € | Poodi |
Saeleht HSS 400x25x1.25mm 14TPI Tootekood: 3802-400-25-1.25-14 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 18,64 € | Poodi |
Saeleht HSS 400x25x1.25mm 10TPI Tootekood: 3802-400-25-1.25-10 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 18,64 € | Poodi |
Saeleht HSS 350x32x1.60mm 8TPI Tootekood: 3802-350-32-1.60-8 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 19,22 € | Poodi |
Saeleht HSS 350x32x1.60mm 6TPI Tootekood: 3802-350-32-1.60-6 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 19,18 € | Poodi |
Saeleht HSS 350x32x1.60mm 4TPI Tootekood: 3802-350-32-1.60-4 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 19,18 € | Poodi |
Saeleht HSS 350x32x1.60mm 14TPI Tootekood: 3802-350-32-1.60-14 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 19,18 € | Poodi |
Saeleht HSS 350x32x1,6mm 10TPI Tootekood: 3802-350-32-1.60-10 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 19,18 € | Poodi |
Saeleht HSS 350x25x1.25mm 6TPI Tootekood: 3802-350-25-1.25-6 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 14,65 € | Poodi |
Saeleht HSS 350x25x1.25mm 14TPI Tootekood: 3802-350-25-1.25-14 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 14,65 € | Poodi |
Saeleht HSS 350x25x1.25mm 10TPI Tootekood: 3802-350-25-1.25-10 Masinsaelehed • Designed for cutting almost any material<br>• High speed steel hacksaw blade<br>• Suitable for use on modern machines with skilled operators and a high degree of control<br>• Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade<br>• If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs<br>• Excessive tension causes high stresses in the blade and saw frame<br>• As a general rule, harder materials call for a lower stroke rate and higher feed pressure<br>• If the chips are burnt, feed pressure is too high<br>• If tooth cracks appear, feed pressure is too high<br>• Fine, powdery chips indicate that feed pressure is too low<br>• Fine curled chips indicate the optimal feed pressure<br>• The teeth should not be touching the workpiece when the machine is started<br>• A useful rule of thumb is that at least three teeth should be engaged at any time |  | Tarne 14 tööpäeva | 14,65 € | Poodi |
Tooted 4 951
– 5 000
/ 5 000
50
Saeleht HSS 550x50x2.50mm 8TPI KASTO masinatele Tootekood: 3802-550-50-2.50-8-KA Masinsaelehed | | 76,65 € | Poodi | |
Saeleht HSS 550x50x2.50mm 8TPI Tootekood: 3802-550-50-2.50-8 Masinsaelehed | | 76,77 € | Poodi | |
Saeleht HSS 550x50x2.50mm 6TPI Tootekood: 3802-550-50-2.50-6 Masinsaelehed | 76,65 € | Poodi | ||
Saeleht HSS 550x50x2.50mm 4TPI KASTO masinatele Tootekood: 3802-550-50-2.50-4-KA Masinsaelehed | | 76,65 € | Poodi | |
Saeleht HSS 550x50x2.50mm 4TPI Tootekood: 3802-550-50-2.50-4 Masinsaelehed | | 76,65 € | Poodi | |
Saeleht HSS 550x50x2.50mm 10TPI Tootekood: 3802-550-50-2.50-10 Masinsaelehed | | 76,65 € | Poodi | |
Saeleht HSS 525x38x2.00mm 8TPI Tootekood: 3802-525-38-2.00-8 Masinsaelehed | | 50,06 € | Poodi | |
Saeleht HSS 525x38x2.00mm 6TPI Tootekood: 3802-525-38-2.00-6 Masinsaelehed | | 49,95 € | Poodi | |
Saeleht HSS 525x38x2.00mm 10TPI Tootekood: 3802-525-38-2.00-10 Masinsaelehed | | 49,95 € | Poodi | |
Saeleht HSS 500x50x2.50mm 6TPI Tootekood: 3802-500-50-2.50-6 Masinsaelehed | | 72,51 € | Poodi | |
Saeleht HSS 500x50x2.50mm 4TPI Tootekood: 3802-500-50-2.50-4 Masinsaelehed | | 72,51 € | Poodi | |
Saeleht HSS 500x45x2.25mm 10TPI Tootekood: 3802-500-45-2.25-10 Masinsaelehed | | 61,37 € | Poodi | |
Saeleht HSS 500x38x2.00mm 8TPI Tootekood: 3802-500-38-2.00-8 Masinsaelehed | | 47,96 € | Poodi | |
Saeleht HSS 500x38x2.00mm 4TPI Tootekood: 3802-500-38-2.00-4 Masinsaelehed | | 47,96 € | Poodi | |
Saeleht HSS 500x38x2.00mm 10TPI Tootekood: 3802-500-38-2.00-10 Masinsaelehed | | 47,96 € | Poodi | |
Saeleht HSS 500x38x2,0mm 6TPI Tootekood: 3802-500-38-2.00-6 Masinsaelehed | | 47,96 € | Poodi | |
Saeleht HSS 475x38x2.00mm 8TPI Tootekood: 3802-475-38-2.00-8 Masinsaelehed | | 41,18 € | Poodi | |
Saeleht HSS 450x38x2.00mm 8TPI KASTO masinatele Tootekood: 3802-450-38-2.00-8-KA Masinsaelehed | | 40,92 € | Poodi | |
Saeleht HSS 450x38x2.00mm 8TPI Tootekood: 3802-450-38-2.00-8 Masinsaelehed | | 40,92 € | Poodi | |
Saeleht HSS 450x38x2.00mm 6TPI KASTO masinatele Tootekood: 3802-450-38-2.00-6-KA Masinsaelehed | | 40,92 € | Poodi | |
Saeleht HSS 450x38x2.00mm 4TPI KASTO masinatele Tootekood: 3802-450-38-2.00-4-KA Masinsaelehed | | 40,92 € | Poodi | |
Saeleht HSS 450x38x2.00mm 4TPI Tootekood: 3802-450-38-2.00-4 Masinsaelehed | | 40,92 € | Poodi | |
Saeleht HSS 450x38x2.00mm 10TPI KASTO masinatele Tootekood: 3802-450-38-2.00-10-KA Masinsaelehed | | 40,92 € | Poodi | |
Saeleht HSS 450x38x2,0mm 6TPI Tootekood: 3802-450-38-2.00-6 Masinsaelehed | | 40,92 € | Poodi | |
Saeleht HSS 450x38x2,0mm 10TPI Tootekood: 3802-450-38-2.00-10 Masinsaelehed | | 40,92 € | Poodi | |
Saeleht HSS 450x32x1.60mm 6TPI Tootekood: 3802-450-32-1.60-6 Masinsaelehed | | 30,48 € | Poodi | |
Saeleht HSS 450x32x1.60mm 4TPI Tootekood: 3802-450-32-1.60-4 Masinsaelehed | | 30,51 € | Poodi | |
Saeleht HSS 450x32x1.60mm 14TPI Tootekood: 3802-450-32-1.60-14 Masinsaelehed | | 30,48 € | Poodi | |
Saeleht HSS 450x32x1.60mm 10TPI Tootekood: 3802-450-32-1.60-10 Masinsaelehed | | 30,48 € | Poodi | |
Saeleht HSS 425x32x1.60mm 6TPI Tootekood: 3802-425-32-1.60-6 Masinsaelehed | | 28,81 € | Poodi | |
Saeleht HSS 425x32x1.60mm 10TPI Tootekood: 3802-425-32-1.60-10 Masinsaelehed | | 29,40 € | Poodi | |
Saeleht HSS 400x38x2.00mm 6TPI Tootekood: 3802-400-38-2.00-6 Masinsaelehed | | 32,64 € | Poodi | |
Saeleht HSS 400x38x2.00mm 4TPI Tootekood: 3802-400-38-2.00-4 Masinsaelehed | | 32,64 € | Poodi | |
Saeleht HSS 400x38x2.00mm 10TPI Tootekood: 3802-400-38-2.00-10 Masinsaelehed | | 32,64 € | Poodi | |
Saeleht HSS 400x32x1.60mm 8TPI Tootekood: 3802-400-32-1.60-8 Masinsaelehed | | 24,26 € | Poodi | |
Saeleht HSS 400x32x1.60mm 6TPI Tootekood: 3802-400-32-1.60-6 Masinsaelehed | | 24,26 € | Poodi | |
Saeleht HSS 400x32x1.60mm 4TPI Tootekood: 3802-400-32-1.60-4 Masinsaelehed | | 24,26 € | Poodi | |
Saeleht HSS 400x32x1.60mm 14TPI Tootekood: 3802-400-32-1.60-14 Masinsaelehed | | 24,26 € | Poodi | |
Saeleht HSS 400x32x1.60mm 10TPI Tootekood: 3802-400-32-1.60-10 Masinsaelehed | | 24,26 € | Poodi | |
Saeleht HSS 400x25x1.25mm 6TPI Tootekood: 3802-400-25-1.25-6 Masinsaelehed | | 18,64 € | Poodi | |
Saeleht HSS 400x25x1.25mm 14TPI Tootekood: 3802-400-25-1.25-14 Masinsaelehed | | 18,64 € | Poodi | |
Saeleht HSS 400x25x1.25mm 10TPI Tootekood: 3802-400-25-1.25-10 Masinsaelehed | | 18,64 € | Poodi | |
Saeleht HSS 350x32x1.60mm 8TPI Tootekood: 3802-350-32-1.60-8 Masinsaelehed | | 19,22 € | Poodi | |
Saeleht HSS 350x32x1.60mm 6TPI Tootekood: 3802-350-32-1.60-6 Masinsaelehed | | 19,18 € | Poodi | |
Saeleht HSS 350x32x1.60mm 4TPI Tootekood: 3802-350-32-1.60-4 Masinsaelehed | | 19,18 € | Poodi | |
Saeleht HSS 350x32x1.60mm 14TPI Tootekood: 3802-350-32-1.60-14 Masinsaelehed | | 19,18 € | Poodi | |
Saeleht HSS 350x32x1,6mm 10TPI Tootekood: 3802-350-32-1.60-10 Masinsaelehed | | 19,18 € | Poodi | |
Saeleht HSS 350x25x1.25mm 6TPI Tootekood: 3802-350-25-1.25-6 Masinsaelehed | | 14,65 € | Poodi | |
Saeleht HSS 350x25x1.25mm 14TPI Tootekood: 3802-350-25-1.25-14 Masinsaelehed | | 14,65 € | Poodi | |
Saeleht HSS 350x25x1.25mm 10TPI Tootekood: 3802-350-25-1.25-10 Masinsaelehed | | 14,65 € | Poodi |