self-adjusting for cable Ø 0.2 - 6 mm² front-cutting with adjustable length stop for stripping from 8 to 12 mm cutter up to 2 mm diameter locking device for space saving storage and protection of the blades Packaging suitable for wall hanging Yes Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
stainless steel tube for pushing through the cutting wire Length 100 mm Handle type Aluminium Packaging suitable for wall hanging Yes Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
serves for examination of hard-to-reach areas in vehicles and aircrafts, household, workshop and industry transportable and network-independent system suitable for devices with Android and iOS operating systems live image is transmitted directly to the mobile device via WLAN incl. smartphone holder for the end device continuously swiveling, semi-rigid camera probe (180° laterally swiveling) with integrated rechargeable battery camera diameter: 8 mm field of view: 60° focal length: 30 - 80 mm frame rate: 30 fps video format: AVI image format: JPG gooseneck length: 90 cm overall length: approx. 125 cm working temperature: -20 to +60 °C scope of delivery: color boreskop mobile phone holder charging cable USB-A / Micro-USB cleaning cloth for camera lens Working temperature min. -20 °C Working temperature max. 60 °C Protection class IP67 Accumulator power (electric charge) 1800 mAh Battery type Li-Ion-Poly Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
for renewing the rear control arm bushing suitable for all Mercedes-Benz models of the E-class W210 Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
for removing and installing the large rear bush of the lower control arms on the front axle suitable for control arm bushes with original spare part numbers OE 4042024, 4372132, 4540787 and 7372131 can be used in conjunction with a pressure frame or a workshop press Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
for renewing the rear control arm bushing suitable for all Mercedes-Benz W170 (SLK) and W202 (C-class) models Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
to depress the wishbone and other axle parts when removing the drive shaft, whem chamging the drive shaft boot or the wheel bearing facilitates the removal of control arm ball joints from the wheel bearing housing also very helpful in the assembly of pre-tensioned control arms support adjustable in 3 positions neoprene handle for secure grip Length 120 cm Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
enables convenient lowering of the wishbone holds the wishbone in the retracted position required for example when replacing the wheel bearing, repair on the strut or the drive shaft no risk of injury due to sliding mounting lever prevents damage to the ball joints and drive shaft sleeves for easy and fast assembly low height universal use due to adjustable chain support surface with anti-slip support total length incl. hook: 1030 mm to 1300 mm Clamping height: 65 mm to 265 mm chain length including hook: approx. 660 mm Max. traction 500 kg Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
for regular use on a hard, uncomfortable ground floor surface comfortable working underneath vehicles on a level surface can be used in different application areas as a mechanic's protection lying mat, seat block or knee protection pad comfortable in various positions convenient handle recess at the upper side compact dimensions when folded and therefore easy to stow away after use shock-absorbing properties in connection due to the use of different foam components insulating characteristics through 3-layer material non-slip surface, remains in position during use moisture and dirt resistant dimensions of lying mat (unfolded): 1200 x 420 x 30 mm knee protection pad dimensions: 600 x 420 x 60 mm seat block dimensions (folded): 195 x 420 x 180 mm Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
non-slip coating high wearing comfort minimal impairment of the sense of touch, thus also suitable for fine-motor assembly work DIN ISO 388 Size 8 (M) Packaging suitable for wall hanging Yes Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
with one step platform area: 760 x 300 mm platform height: 495 mm low weight aluminum construction Max. load bearing capacity 100 kg Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
Tootekood: 9478GTIN: 4026947094786Mööbel ja sisustus > Köögimööbel
suitable for the workshop and for home robust base due to stable round tube leg shape swivel seat footrest for comfortable sitting padded molded foam seat in leather look cover rubberized feet for a safe stand material seat: polyurethane (PU) Height 730 mm Width 514 mm Max. load bearing capacity 100 kg Surface finish Chrome-plated, high-gloss Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
square metal frame size 1000 x 420 x 100 mm padded cover 6 swivel casters with ball bearing rubber wheels for easy movement capacity: 150 kg Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
heavy and robust execution ergonomically designed head rest 6 rolling wheels capacity: 110 kg Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
for comfortable working under the vehicle when carrying out maintenance and service work for use while lying down padded lying surface and headrest, thus comfortable even during longer repairs washable upholstery low overall height for comfortable working ideal addition to the equipment in the workshop robust due to stable round tube frame construction arm areas cut out for optimal freedom of movement plastic swivel castors with ball bearing frame material: steel dimensions: 1135 x 510 x 185 mm number of swivel castors: 6 Max. load bearing capacity 180 kg Castor diameter 75 mm Surface finish Powder-coated Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
for comfortable working on and under the vehicle extra low overall height for comfortable working overall height of the lying surface only 140 mm large ergonomic lying surface for working in lying position stable, robust tubular steel frame construction with padded lying surface black powder coated metal frame extra reinforced padded headrest (135 mm) flexible use, due to 4 360° swivelling plastic casters (oil resistant and low noise) washable upholstery pad size: 950 x 430 x 115 mm frame size: 1090 x 485 x 170 mm frame material: tubular steel number of castors: 4 Max. load bearing capacity 180 kg Castor diameter 125 mm Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
BGS technic Workshop Creeper, with work lamp, 1030 x 500 mm
Tootekood: 2996GTIN: 4026947029962Mööbel ja sisustus > Lambid, valgustid
material: durable PE plastic 6 castors Ø 75 mm 1030 mm length x 500 mm width LED work light for under car lighting included comfortable head rest max. weight capacity: For up to 150 kg Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
padded seat large storage compartment in the base height-adjustable through hydropneumatics height: 450 - 580 mm seat: Ø 360 mm shelf plate: Ø 440 mm Castor diameter 75 mm Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
visually appealing and space-saving seating option suitable for sales counter, cash desks, workshop, etc. solid frame construction made of steel tube with 4 feet stepless height adjustment of the seat ergonomically shaped, comfortable seat with PU foam padding plastic caps on the feet provide an anti-slip effect and are especially quiet rotation range seat area: 360° backrest: 120 mm seat material: PU foam cushion, PU imitation leather frame material: tubular steel diameter frame: Ø 25 mm Max. load bearing capacity 150 kg Surface finish Powder-coated Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
visually appealing and space-saving seating option suitable for sales counter, cash desks, workshop, etc. solid frame construction made of steel tube with 4 swivel castors stepless height adjustment of the seat ergonomically shaped, comfortable seat with PU foam padding rotation range seat area: 360° backrest: 120 mm seat material: PU foam cushion, PU imitation leather frame material: tubular steel diameter frame: Ø 25 mm Max. load bearing capacity 150 kg Surface finish Powder-coated Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
visually appealing and space-saving seating option suitable for sales counter, cash desks, workshop, etc. solid frame construction made of steel tube with 4 feet stepless height adjustment of the seat ergonomically shaped, comfortable seat with PU foam padding extra high backrest for a comfortable seating plastic caps on the feet provide an anti-slip effect and are especially quiet rotation range seat area: 360° backrest: 330 mm seat material: PU foam cushion, PU imitation leather frame material: tubular steel diameter frame: Ø 25 mm Max. load bearing capacity 150 kg Surface finish Powder-coated Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
suitable as attachment to BGS 2001, 2004 wall thickness body: 0.8 mm wall thickness drawers: 0.6 mm 3 flat, 1 medium high drawer 1 large storage compartment with lockable closure lid with 2 keys side-mounted handles ball bearing drawers, 100% extendable Length 660 mm Height 377 mm Width 307 mm Net weight 25 kg Number of Drawers 4 Pcs. Drawer depth 250.7 mm Drawer width 560 mm Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
Deburring tool: Ø 12 - 16 - 19 mm with quick lock, non-slip ergonomic 2 component handle Material Chrome Vanadium Steel Packaging suitable for wall hanging Yes Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
knurled Material Chrome Vanadium Steel Drive profile Inside square Output profile Outer square Surface finish Chrome-plated, matt Number of parts 3 Drive Profile Size 10 mm (3/8") Output profile size 10 mm (3/8") Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
knurled scope of delivery: 1 "wobble" extension bar | 12.5 mm (1/2") | 50 mm (BGS 233) 1 "wobble" extension bar | 12.5 mm (1/2") | 125 mm (BGS 234) 1 "wobble" extension bar | 12.5 mm (1/2") | 250 mm (BGS 235) Material Chrome Vanadium Steel Drive profile Inside square Output profile Outer square Surface finish Chrome-plated, matt Number of parts 3 Drive Profile Size 12,5 mm (1/2") Output profile size 12.5 mm (1/2") Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
includes the following tools: 3 "wobble" extension bars, 6.3 mm (1/4") drive: 50 - 100 - 250 mm 3 "wobble" extension bars, 10 mm (3/8") drive: 75 - 150 - 250 mm 3 "wobble" extension bars, 12.5 mm (1/2") drive: 50 - 125 - 250 mm Number of parts 9 Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
2-component cyanacrylate-based adhesive best adhesion properties on many different types of material such as metal, many plastics, e.g. PVC, ABS, PC, PBT, rubber, porose/absorbent materials such as wood, paper, cardboard, leather and textiles application: in vehicle construction and industrial areas thixotropic drip free extremely impact resistant mechanically editable usable overhead and in vertical locations good chemical resistance low blowing transparent bonding of PMMA incl. 3 mixing tubes, additional tubes BGS 80603-1 can be ordered separately Mix ratio: 4:1 processing time: approx. 5 - 6 minutes temperature resistance: -40°C to +80°C, short-term up to +120°C processing temperature: from -25°C filling capacity: up to 6 mm break elongation: 200% Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
length 60 cm higher torque through adjustable joint Max. torque 570 Nm Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
for deep cleaning of the working area and blowing out components for dust removal and cleaning of hard-to-reach areas on and in the vehicle the enclosed brush is supportive in case of stubborn contamination brush can be easily locked and removed with the help of a knurled screw composite material of nylon and glass fiber, light and stable compressed air connection: 6.3 mm (1/4") Length 310 mm Max. working pressure 8 bar Compressed air connection 1/4 " Packaging suitable for wall hanging Yes Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
universally applicable gun for blowing out, drying and cleaning surfaces or components particularly for use in difficult to access areas on machines and engine compartments venturi boosts air flow up to 4 times higher than regular air guns stepless regulation of the air volume via lever mechanism on the pistol grip high blow force extra-long and slim design ergonomic handle made of impact-resistant plastic with corrugated and non-slip surface Length 1000 mm Max. working pressure 12 bar Air consumption 282 l/min Compressed air connection 1/4 " Packaging suitable for wall hanging No Delivery: not in stock - ordered from the manufacturer for you, usually 13-15 working days.
working pressure: 6.3 bar (90 psi) air consumption: 51.6 l/min (1.8 cfm) 2 saw blades included weight: 0.65 kg noise level: LpA = 88.15 dB(A) / LwA = 99.15 dB(A) vibration level: ahd = 15.06 m/s² K = 1.99 m/s² Stroke 10 mm Stroke rate 9000 Strokes / min. Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
optimized automatic flow control for continuous squeezing of the material, without subsequent leakage of the material efficient, stepless quantity regulation enables correct metering of the material and thus maximum cleanliness during application for permanently elastic sealants, adhesive pastes, joint putties, etc. compact design with steel cylinder universally applicable with commercially available cartridges (cardboard, aluminum or plastic cartridges) up to 310 ml Length 311 mm Air consumption 113 l/min Compressed air connection 1/4 " Sound pressure level 99 dB(A) Sound power level 116 dB(A) Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
suitable for repair of minor dents no filling or painting work necessary reduces time and cost air dent puller with air flow control valve foot made from stainless steel, with PVC protection pneumatic cylinder with front air exhaust, makes centre shaft movement smooth and helps to cool down the hotmelt glue compressed air connection: 6.3 mm (1/4") operating pressure: 3 - 10 bar (40 - 145 PSI) noise level 6.3 bar: LpA 66.5 db(A) / LwA 77.5 db(A) vibration: ahd 0.4 m/s² / K 0.53 m/s² incl. 10 dent pads in various sizes / shapes and one extension adaptor Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
for surface polishing with air suction hose and dust bag for collecting the grinding dust sanding pad: Ø 152 mm free speed: 10000 rpm air suction hose 10 mm (3/8") grinding wheel adaptor with 6 suction holes drive shaft thread: M6 x 1.0 Length 225 mm Air consumption 142 l/min Operating pressure 6.3 bar Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
volume: 400 cm³ incl. flexible and rigid delivery tubes working pressure: 6.2 bar (90 psi) noise level: LpA = 85.1 dB(A) / LwA = 96.1 dB(A) vibration level: ahd = 0.51 m/s² K = 0.55 m/s² optional accessories: flexible delivery tube BGS 3066 Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
for work on car body panels and other materials for sawing steel, plastic, brass, wood panels depending on the type of saw blade used infinitely variable number of strokes for precise sawing according to the material adjustable saw blade guide adjustable exhaust air guide avoids dust turbulence in the working area robust composite housing for high durability material thickness: 5 mm scope of delivery: 1 air jig saw and reciprocating saw 1 jig saw blade, 14 teeth per inch 3 reciprocating saw blades, 14, 18, 24 teeth per inch Net weight 1 kg Max. working pressure 6.2 bar Air consumption 104 l/min Compressed air connection 1/4 " Sound pressure level 80 dB(A) Sound power level 92 dB(A) Vibration 12.96 m/s² Stroke 11 mm Stroke rate 5000 Strokes / min. Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
suitable for aluminium rivets in sizes 2.4 - 3.2 - 4.0 - 4.8 mm stroke length: 14 mm working pressure 6.2 bar Air consumption 0.86 l/min Max. traction 720 kg Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
fits on all standard cartridges incl. flexible 500 mm air hose Air consumption 300 l/min Packaging suitable for wall hanging Yes Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
prevents the engine valve from falling into the body due to counterpressure, caused by air delivered via a spark plug-thread suitable for spark plug threads M14 x 1.25 and M18 x 1.5 extensive accessories operates with 10 mm (3/8") drive T-handle or ratchet Number of parts 15 Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
Tootekood: 9671GTIN: 4026947096711Elektroonikakomponendid ja tööstus > Mõõte- ja testimisseadmed
robust and break-proof type for checking acid density and charge condition of rechargeable batteries for direct reading extra low total height for measuring without any difficulty in small areas measuring scale with colored sectors easy filling of measuring chamber without air bubbles hydrostatic reverse lock Packaging suitable for wall hanging Yes Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
special bit set with alternator combination wrenches (also air conditioning compressor) for assembling belt pulleys spline pulley key, 15 mm, 33 teeth, bored spline pulley key, 22 mm, 33 teeth, bored counterholder, external hexagon 21 mm, length 30 mm 4-pin adapter, 17 mm drive bits, length 75 mm, external hexagon 10 mm (3/8") drive, internal hexagon H8 and H10 mm bits, length 75 mm, external hexagon 10 mm (3/8") drive, spline (for XZN) M8 - M10 bits, length 75 mm, external hexagon 10 mm (3/8") drive, T-Star (for Torx) T40 and T50 bit socket for alternator, 12.5 mm (1/2") drive, spline (for XZN) M10 bit socket for alternator, 12.5 mm (1/2") drive, T-Star (for Torx) T50 bit adaptor with retaining ball, 12.5 mm (1/2") drive - internal hexagon 10 mm (3/8") includes adaptors for VW, Audi, Seat, BMW, Mercedes-Benz, Ford Number of parts 13 Drive Profile Size 12,5 mm (1/2") Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
special bit set with alternator combination sockets (also for air conditioning compressors), for assembly and disassembly of the freewheel pulley scope of delivery: multi-tooth 15 mm, 33 tooth, Ø17.5 mm socket multi-tooth 15 mm, 33 tooth, Ø19.5 mm socket multi-tooth 22 mm, 33 tooth, Ø19.5 mm socket adapter for pulley wrench, 19 mm and 28 mm adapter for pulley wrench, 22 mm and 28 mm 3-pin adapter, external hex drive 38 mm 4-pin adapter, external hex drive 17 mm bits, length 70 mm, hexagon 10 mm drive, hexagon H10 mm bits, length 75 mm, external hexagon drive 10 mm (3/8"), hexagon socket 8 and 10 mm, bits length 75 mm, external hexagon drive 10 mm (3/8"), spline (for XZN) M8 and M10 bits, length 75 mm, external hexagon drive 10 mm (3/8 "), T-star (for Torx) T40 and T50 bit adapter with retaining ball, square 12.5 mm (1/2") drive hexagon socket 10 mm (3/8") bit socket for alternator, external hex drive 12 mm, spline (for XZN) M10 bit socket, length 90 mm, 10 mm (3/8") drive, spline (for XZN) M10 bit socket, length 110 mm, 12.5 mm (1/2") drive, spline (for XZN) M10 bit socket, length 140 mm, 12.5 mm (1/2") drive, spline for XZN) M10 bit socket, length 110 mm, 12.5 mm (1/2") drive, T-star (for Torx) T50 Special insert, external hex drive 17 mm special socket, external hex drive 21 mm special socket, external hex drive 22 mm and 28 mm incl. adapter for BMW, Fiat, Ford, Mercedes-Benz, Opel / Vauxhall, Porsche, Renault, Toyota, VAG etc. Material Chrome Vanadium Steel Number of parts 23 Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
bit is moved by turning the handle for adjusting (e.g. carburetor screws), do not use for tightening scope of delivery: head with 6.3 mm (1/4") bit holder with clip-on handle Length 480 mm Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
precise workshop finish to accurately set the angle required max. capacity approx. 280 Nm Drive profile Inside square Packaging suitable for wall hanging Yes Drive Profile Size 12,5 mm (1/2") Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
for tightening screwed connections to the angle of rotation with magnet on the back for fixing on the tool digital angle value display angle measurement for clockwise and counterclockwise rotation Target angle measurement with optical light signal (6 LEDs) and acoustic signal memory for 9 presettable target angles data memory for 50 rotation angle measurements automatic switch-off after 2 minutes of idle time accuracy: +/- 2° display range: 0 - 999.0° target memory: 9 target memory range: 1 - 360.0° data memory size: 50 target angle display: 5 green + 1 red LED number of control buttons: 5 Working temperature min. -10 °C Working temperature max. 60 °C Battery type 2 x AAA ┆ 1,5 V Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
with automatic reel stop, can be unlocked by briefly pulling the cable swivable holder for wall mounting, with mounting bracket cable diameter 3 x 1.5 mm² cable length 15 m + 1 m feed line voltage suitable for 230 V Length 295 mm Height 330 mm Width 165 mm Protection class IP 20 Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
automatic cable retraction with bracket for wall mounting suitable for indoor use with thermal protection switch, triggered when the cable temperature is too high nominal voltage: 230 volts ampacity (rolled up): max. 4.3 amps ampacity (unrolled): max. 13 amps power (rolled up): max. 1000 watts power (unrolled): max. 3000 watts number of sockets: 1 protection class: 1 cable length: 15 m supply cable: 1 m Length 298 mm Height 280 mm Width 167 mm Net weight 5.2 kg Protection class IP34 Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
suitable for indoor use protected against foreign material and splash-proof automatic cable retraction with bracket for wall mounting nominal voltage: 230 volts cable diameter 3 x 1.5 mm² ampacity (rolled up): max. 16 amps ampacity (unrolled): max. 16 amps power (rolled up): max. 1000 watts power (unrolled): max. 3000 watts number of sockets: 1 protection class: 1 supply cable: 1 m Length 455 mm Height 316 mm Width 184 mm Net weight 6.7 kg Protection class IP 20 Rated voltage 230 V Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
automatic cable retraction with bracket for wall mounting suitable for indoor use with thermal protection switch, triggered when the cable temperature is too high nominal voltage: 230 volts ampacity (rolled up): max. 16 amps ampacity (unrolled): max. 16 amps power (rolled up): max. 1000 watts power (unrolled): max. 3000 watts number of sockets: 1 protection class: 1 supply cable: 1 m Length 455 mm Height 316 mm Width 184 mm Net weight 8 kg Protection class IP 20 Rated voltage 230 V Delivery: not in stock - ordered from the manufacturer for you, usually 10-12 working days.
