Arvutitark OÜ

For perfect bends in the Alphacool HardTubes now there is the perfect solution. Simply insert the silicone inside the HardTube and heat the desired location. Thanks to the extremely heat-resistant silicone the pipe can be bent without the curved point kinking. After cooling, the silicone can be easily removed. Available for HardTubes with 10mm and 12mm inner diameter in each 30cm length for curves in short pipes and 100cm length for curves in longer pipes. Technical Data Length: 100cm Thickness: 9.2mm Color: blue Scope of delivery 1x Alphacool Silicon Insert 100cm NoticeDue to the manufacturing process, the diameter can vary by 0.5 - 1mm.

For perfect bends in the Alphacool HardTubes now there is the perfect solution. Simply insert the silicone inside the HardTube and heat the desired location. Thanks to the extremely heat-resistant silicone the pipe can be bent without the curved point kinking. After cooling, the silicone can be easily removed. Available for HardTubes with 10mm and 12mm inner diameter in each 30cm length for curves in short pipes and 100cm length for curves in longer pipes. Technical Data Length: 150 cm Thickness: 12.7mm Color: blue Scope of delivery 1x Alphacool Silicon Insert 30cm Notice Due to the manufacturing process, the diameter can vary by 0.5 - 1mm.

The perfect solution for perfect curves in the Alphacool HardTubes is now available. Simply slide the silicon insert into the plexiglass tube and heat up the desired section. Thanks to the extreme heat resistance of silicon, the tube can be bent without the curved section buckling. After it cools, the silicon insert can simply be pulled out. Available for tubes with 10mm, 12mm, and now 13mm inner diameters, and each size comes in 30cm length for curves in shorter tubes or 100cm length for curves in longer tubes. Technical Details Length: 30cm Thickness: 13mm Colour: blue Scope of Delivery 1x Alphacool silicon bending insert 30cm for ID 1/2” / 13mm HardTubes - blue NoticeDue to the manufacturing process, the diameter can vary by 0.5 - 1mm.

For perfect bends in the Alphacool HardTubes now there is the perfect solution. Simply insert the silicone inside the HardTube and heat the desired location. Thanks to the extremely heat-resistant silicone the pipe can be bent without the curved point kinking. After cooling, the silicone can be easily removed. Available for HardTubes with 10mm and 12mm inner diameter in each 30cm length for curves in short pipes and 100cm length for curves in longer pipes. Technical Data Length: 30cm Thickness: 9.2mm Color: blue Scope of delivery 1x Alphacool Silicon Insert 30cm NoticeDue to the manufacturing process, the diameter can vary by 0.5 - 1mm.

Alphacool's entry into the thermal compound market: Alphacool Silver Grease! Everyone needs thermal compound when assembling or working on a system. Of course only the best should be used for the finished system, but the cost of the thermal compound also needs to be considered. Especially when using expensive thermal compounds, things can get rather expensive when just testing a few different set-ups. This is where the new Alphacool Silver Grease is the ideal alternative: For some this is an affordable stock of thermal compound, for others this is the source for new ideas where expensive thermal compound is no longer an obstacle. Shipped in a 0.5g syringe and at this price this is the perfect item to always have a few of at home! The silicone-based thermal compound also contains silver particles, ensuring good thermal transfer whilst not being electrically conductive. Technical specifications: Content: 0.5g Material: Silver particles, silicone Colour: Grey electrically non-conductive no separation of the contents Suitable for high contact pressures Conforms with RoHS regulations Extent of delivery: 1x Syringe This product has been reviewed for you: Powerbase

Sleeved extension cable for JST 3-pin ARGB, 15 cm length, with socket and plug.

Praktische 250-ml-Spritzflasche, zum einfachen Befüllen einer Wasserkühlung

Praktische 500-ml-Spritzflasche, zum einfachen Befüllen einer Wasserkühlung

The Alphacool Subzero Thermal Grease is intended for all users who want to achieve optimum performance with their system. With a thermal conductivity of 16 W/mK, this electrically non-conductive thermal paste suitable for high contact pressures is an excellent choice when performance and ease of application are required. Application Subzero 16W/mK Thermal Grease can be optimally applied due to its high viscosity. For perfect application of the thermal paste, a plastic spatula (included in delivery) or a comparable tool should be used. Properties Alphacool's Subzero Thermal Grease has a high thermal conductivity of 16 W/mK, making it one of the best performing thermal pastes on the market. Only thermal pastes made from liquid metal offer better thermal conductivity. Subzero Thermal Grease is delivered in an applicator with a screw cap. The amount of thermal grease is sufficient for several applications and can be stored in the applicator to protect it from drying out. A plastic spatula is included for perfect application of the thermal paste. Subzero Thermal Grease is non-conductive and non-caustic. If a small amount of paste is spilled during application, damage to the hardware is highly unlikely. Technical data Color Appearance: gray Viscosity (mPa. s): 3,000,000 Specific Gravity (g/cm3): 2.7 Thermal Resistance (Degree Celsius*cm2/w) 60Psi: 0.05 Dielectric Constant: 14.5 at 1MHz Volatile matter (%), 120 Degree Celsius @96hrs: 0.18 Out Gasing (%), 200 Degree Celsius @96hrs: 0.01 Temperature Stability (Degree Celsius): -50 ~ 200 Shelf Life: 2 years Product Features: easy to work with, non-caustic, anti-oxidation, not easily solidifying.

The Alphacool Subzero Thermal Grease is intended for all users who want to achieve optimum performance with their system. This electrically non-conductive thermal paste suitable for high contact pressures is an excellent choice when performance and ease of application are required.ApplicationSubzero Thermal Grease can be optimally applied due to its high viscosity. For perfect application of the thermal paste, a plastic spatula (included in delivery) or a comparable tool should be used.PropertiesAlphacool's Subzero Thermal Grease has a high thermal conductivity, making it one of the best performing thermal pastes on the market. Only thermal pastes made from liquid metal offer better thermal conductivity. Subzero Thermal Grease is delivered in an applicator with a screw cap. The amount of thermal grease is sufficient for several applications and can be stored in the applicator to protect it from drying out. A plastic spatula is included for perfect application of the thermal paste. Subzero Thermal Grease is non-conductive and non-caustic. If a small amount of paste is spilled during application, damage to the hardware is highly unlikely. Technical dataColor AppearancegrayViscosity (mPa. s)3,000,000Specific Gravity (g/cm3)2,7Thermal Resistance (Degree Celcius*cm2/w) 60Psi0,05Dielectric Constant14,5 at 1MHzVolatile matter (%), 120 Degree Celcius @96hrs0,18Out Gasing (%), 200 Degree Celcius @96hrs0,01Temperature Stability (Degree Celcius)-50 ~ 200Shelf Life2 yearsProduct Featureseasy to work with, non-caustic, anti-oxidation, not easily solidifying

The Alphacool Subzero Thermal Grease is intended for all users who want to achieve optimum performance with their system. This electrically non-conductive thermal paste suitable for high contact pressures is an excellent choice when performance and ease of application are required.ApplicationSubzero Thermal Grease can be optimally applied due to its high viscosity. For perfect application of the thermal paste, a plastic spatula (included in delivery) or a comparable tool should be used.PropertiesAlphacool's Subzero Thermal Grease has a high thermal conductivity, making it one of the best performing thermal pastes on the market. Only thermal pastes made from liquid metal offer better thermal conductivity. Subzero Thermal Grease is delivered in an applicator with a screw cap. The amount of thermal grease is sufficient for several applications and can be stored in the applicator to protect it from drying out. A plastic spatula is included for perfect application of the thermal paste. Subzero Thermal Grease is non-conductive and non-caustic. If a small amount of paste is spilled during application, damage to the hardware is highly unlikely. Technical dataColor AppearancegrayViscosity (mPa. s)3,000,000Specific Gravity (g/cm3)2,7Thermal Resistance (Degree Celcius*cm2/w) 60Psi0,05Dielectric Constant14,5 at 1MHzVolatile matter (%), 120 Degree Celcius @96hrs0,18Out Gasing (%), 200 Degree Celcius @96hrs0,01Temperature Stability (Degree Celcius)-50 ~ 200Shelf Life2 yearsProduct Featureseasy to work with, non-caustic, anti-oxidation, not easily solidifying

Kühlflüssigkeit für Wasserkühlungen, Klar, besonders Hardware-schützend, 1.000 ml Flasche

Quadratischer Temperatursensor für WaKühs, mit für G1/4 Zoll Innengewinde

Alphacool’s answer to the often difficult situation of being unable to mount the heatsink conventionally. With this double-sided thermal adhesive pad from Alphacool it is possible to mount a heatsink at any desired spot without having to worry about mounts, hole spacing or other constructive details.This is especially interesting for systems such as Alphacool’s MCX system to allow mounting of heatsinks for graphics cards or Mainboards. But long-term testing shows that these pads are capable of much more than just holding small heatsinks! A holding power of at least 16N/25mm means an adhesive force greater than with some duct tapes! This allows mounting even of heavy coolers and the capability to deal with shocks from transport or twisting/ permanent pressure. But the engineers at Alphacool also paid attention to the thermal conductivity aspect. Different from the first adhesive pads on the market, which were rather insulation than thermal conductor, these pads transfer the heat with a thermal conductivity of up to 1W/mK The pads are covered with a protective foil on both sides when shipped. When this foil is pulled off, the white pad becomes visible. The pad feels very similar to rubber, and has the same advantages: It adapts to the surfaces easily, hence allowing the best possible heat transfer. Multiple pre-cut dimensions make cutting almost obsolete, but should it be needed to adjust the size of a pad, simply use scissors or a knife! Technical specifications:Material: PolymersColour: WhiteDimensions (L x W x H):15x15x0,5mmThermal conductivity: Up to 1W/mkAdhesive strength: min: 16N/25mm electrically non-conductiveconforms with ROHS Extent of delivery:1x Alphacool double-sided thermal adhesive pad 15x15x0,5mm

Alphacool's answer to the often unsolvable problem: "The cooler cannot be screwed on!" With the double-sided thermal adhesive pad from Alphacool, you can mount your cooler in the desired location regardless of hole spacing, mounting brackets or other options provided. This is particularly interesting, for example, with the in-house MCX system for mounting mini coolers for graphics cards or motherboards. But long-term tests show that you can attach much more than just mini coolers! At least 16N / 25mm means an adhesive force that is better than some duct tape! This means that even heavier coolers can be hung up and even impacts during transport or twisting / constant pressure are no problem. The Alphacool thermal adhesive pad also does not lose sight of the cooling performance. While the first thermal adhesive pads on the market behaved more like insulation, these pads even transfer heat at up to 1W/mK. The pads are covered with a protective film on both sides when they are delivered. If you remove this, you can see the bright white pad, which feels almost like rubber and behaves in almost the same way. It adapts very well to the surface. Various pre-made dimensions make cutting almost unnecessary, but if it should ever be necessary to adjust the size, a pair of scissors or a knife is sufficient. Technical data Material: Polymers Color white Dimensions (LxWxH): 26 x 30 x 0.5 mm Thermal conductivity: up to 1W/mk Adhesive strength: min: 16N/25mm electrically non-conductive ROHS compliant scope of delivery 1x Alphacool thermal adhesive pad double-sided 26x30x0.5 mm

Alphacool’s answer to the often difficult situation of being unable to mount the heatsink conventionally. With this double-sided thermal adhesive pad from Alphacool it is possible to mount a heatsink at any desired spot without having to worry about mounts, hole spacing or other constructive details.This is especially interesting for systems such as Alphacool’s MCX system to allow mounting of heatsinks for graphics cards or Mainboards. But long-term testing shows that these pads are capable of much more than just holding small heatsinks! A holding power of at least 16N/25mm means an adhesive force greater than with some duct tapes! This allows mounting even of heavy coolers and the capability to deal with shocks from transport or twisting/ permanent pressure. But the engineers at Alphacool also paid attention to the thermal conductivity aspect. Different from the first adhesive pads on the market, which were rather insulation than thermal conductor, these pads transfer the heat with a thermal conductivity of up to 1W/mK The pads are covered with a protective foil on both sides when shipped. When this foil is pulled off, the white pad becomes visible. The pad feels very similar to rubber, and has the same advantages: It adapts to the surfaces easily, hence allowing the best possible heat transfer. Multiple pre-cut dimensions make cutting almost obsolete, but should it be needed to adjust the size of a pad, simply use scissors or a knife! Technical specifications:Material: PolymersColour: WhiteDimensions (L x W x H):30x30x0,5mmThermal conductivity: Up to 1W/mkAdhesive strength: min: 16N/25mm electrically non-conductiveconforms with ROHS Extent of delivery:1x Alphacool double-sided thermal adhesive pad 30x30x0,5mm

Alphacool's new thermal pads with 3W / mk The inevitable height differences and uneven spots on coolers and cooled elements as well as the smallest grooves may be balanced due to the very elastic adaptability and the low hardness of the pads. The protective film, which is attached to the surface of the pads must be removed before use!The pads can also be cut to the desired sizewith a pair of scissors or a sharp knife. Application:Graphics card Ram coolerVoltage transformer on the mainboardNorth and / or South Bridge As basic equipment and spare parts these thermal pads have to be a part of any enthusiast's equipment! Technical details:Color: grayDimensions (L x W x H): 15 x 15 x 1.5mmThermal conductivity: 3W / mkelectrically non-conductive Scope of delivery:24x Alphacool thermal pad for NexXxoS GPX

Alphacool's new thermal pads with 3W / mk The inevitable height differences and uneven spots on coolers and cooled elements as well as the smallest grooves may be balanced due to the very elastic adaptability and the low hardness of the pads. The protective film, which is attached to the surface of the pads must be removed before use!The pads can also be cut to the desired sizewith a pair of scissors or a sharp knife. Application:Graphics card Ram coolerVoltage transformer on the mainboardNorth and / or South Bridge As basic equipment and spare parts these thermal pads have to be a part of any enthusiast's equipment! Technical details:Color: grayDimensions (L x W x H): 15 x 15 x 2mmThermal conductivity: 3W / mkelectrically non-conductive Scope of delivery:24x Alphacool thermal pad for NexXxoS GPX

Alphacool's new thermal pads with 3W / mk The inevitable height differences and uneven spots on coolers and cooled elements as well as the smallest grooves may be balanced due to the very elastic adaptability and the low hardness of the pads. The protective film, which is attached to the surface of the pads must be removed before use!The pads can also be cut to the desired sizewith a pair of scissors or a sharp knife. Application:Graphics card Ram coolerVoltage transformer on the mainboardNorth and / or South Bridge As basic equipment and spare parts these thermal pads have to be a part of any enthusiast's equipment! Technical details:Color: grayDimensions (L x W x H): 15 x 15 x 3mmThermal conductivity: 3W / mkelectrically non-conductive Scope of delivery:24x Alphacool thermal pad for NexXxoS GPX

Alphacool's new thermal pads with 3W / mk The inevitable height differences and uneven spots on coolers and cooled elements as well as the smallest grooves may be balanced due to the very elastic adaptability and the low hardness of the pads. The protective film, which is attached to the surface of the pads must be removed before use!The pads can also be cut to the desired sizewith a pair of scissors or a sharp knife. Application:Graphics card Ram coolerVoltage transformer on the mainboardNorth and / or South Bridge As basic equipment and spare parts these thermal pads have to be a part of any enthusiast's equipment! Technical details:Color: grayDimensions (L x W x H): 30 x 30 x 2mmThermal conductivity: 3W / mkelectrically non-conductive Scope of delivery:2x Alphacool thermal pad for NexXxoS GPX

Alphacool's new thermal pads with 3W / mk The inevitable height differences and uneven spots on coolers and cooled elements as well as the smallest grooves may be balanced due to the very elastic adaptability and the low hardness of the pads. The protective film, which is attached to the surface of the pads must be removed before use!The pads can also be cut to the desired sizewith a pair of scissors or a sharp knife. Application:Graphics card Ram coolerVoltage transformer on the mainboardNorth and / or South Bridge As basic equipment and spare parts these thermal pads have to be a part of any enthusiast's equipment! Technical details:Color: grayDimensions (L x W x H): 30 x 30 x 3mmThermal conductivity: 3W / mkelectrically non-conductive Scope of delivery:4x Alphacool thermal pad for NexXxoS GPX

Pads included: 1mm 3x 8x8mm 1x 8x15mm 1x 8x16mm 2x 15x 51mm 2x 15x15mm 1x 15x56mm 2mm 1x 15x51mm 1x 15x105mm 1x 8x66mm 1x 8x100mm 3mm 1x 8x100mm 1x 8x84mm 1x 8x74mm 1x 15x28mm 3x 15x51mm 2x 15x15mm 1x 30x30mm

Pads included: 1mm 14x 8x8mm 1x 8x115mm 1x 8x87mm 3x 15x56mm 3mm 1x 8x100mm 1x 8x81mm 1x 45x45mm (hole in the middle) 3x 15x60mm 1x 15x80mm 1x 15x105mm

Alphacool temperature sensor with cable and 2pin connector.

Flexibler 16/10-Softtube für Wasserkühlungen, langlebiges Material, in 330 cm Länge, mattschwarz

Tubing is the veins of a water cooling system! These are the next generation, made by Alphacool! Deep, intense colours as well as comfortable handling during installation and connection were our focus in developing these tubes. The result is tubing in a variety of sizes and colours, such as red, green, blue, or black. In developing these tubes, we specifically ensured that there would no longer be any need to deal with colour particles in the coolant fluid, but rather that all the colour would come from the tubing itself. Besides the colour, the installation and bending properties are of course very important in tubing. The ability to span a tight bend radius and comfortable handling in tricky spaces were also emphasised during development. This was optimised to perfection by mixing different combinations of synthetic materials, resulting in tubing that manages to bring opposing goals together in harmony and that will satisfy both amateur enthusiasts and experienced water cooling users! Manufactured in Germany, with the promise of consistent high quality. Our years of manufacturing experience guarantee that any product we sell is the best. Technical Specifications: Material: PVC Colour: Transparent Inner diameter: 10mm, 3/8" Outer diameter: 13mm, 1/2" Wall thickness: 1.5mm, 1/15" Scope of Delivery: 1x Alphacool Tubing AlphaTube HF 13/10 (3/8"ID) - clear 1m (3.3ft) Retailbox

Deep, intense colors, pleasant handling and easy installation were the goals when developing this tubing generation. The result is a great choice of sizes and colors such as red, green, blue or black. When designing these tubes, one goal was to make colored coolant and hence the strain from coloring particles on the cooling loop obsolete. With these tubes the color comes from the tubes themselves. Besides color, the installation and kinking properties are always an important factor when choosing tubing. Tight bending radiuses and easy handling in tricky situations were also taken into consideration during development. Hence the plastic mixture was developed to perfection and we have created tubing which manages to combine usually opposing properties to please both beginners and advanced users. Technical specifications Material: PVC Color: Transparent Inner diameter: 10mm, 3/8“ Outer diameter: 13mm, ½“ Wall thickness: 1,5mm, 1/15“ Extent of delivery 1x Alphacool Schlauch AlphaTube HF 13/10 (3/8"ID) - Klar 3m (9,8ft) Retailbox

Tubing is the veins of a water cooling system! These are the next generation, made by Alphacool! Deep, intense colours as well as comfortable handling during installation and connection were our focus in developing these tubes. The result is tubing in a variety of sizes and colours, such as red, green, blue, or black. In developing these tubes, we specifically ensured that there would no longer be any need to deal with colour particles in the coolant fluid, but rather that all the colour would come from the tubing itself. Besides the colour, the installation and bending properties are of course very important in tubing. The ability to span a tight bend radius and comfortable handling in tricky spaces were also emphasised during development. This was optimised to perfection by mixing different combinations of synthetic materials, resulting in tubing that manages to bring opposing goals together in harmony and that will satisfy both amateur enthusiasts and experienced water cooling users! Manufactured in Germany, with the promise of consistent high quality. Our years of manufacturing experience guarantee that any product we sell is the best. Technical Specifications Material: PVC Colour: Transparent Inner diameter: 10mm, 3/8" Outer diameter: 16mm, 5/8" Wall thickness: 3mm Scope of Delivery 1x Alphacool tubing AlphaTube HF 16/10 (3/8"ID) - clear 1m (3,3ft) Retailbox

Tubing is the veins of a water cooling system! These are the next generation, made by Alphacool! Deep, intense colours as well as comfortable handling during installation and connection were our focus in developing these tubes. The result is tubing in a variety of sizes and colours, such as red, green, blue, or black. In developing these tubes, we specifically ensured that there would no longer be any need to deal with colour particles in the coolant fluid, but rather that all the colour would come from the tubing itself. Besides the colour, the installation and bending properties are of course very important in tubing. The ability to span a tight bend radius and comfortable handling in tricky spaces were also emphasised during development. This was optimised to perfection by mixing different combinations of synthetic materials, resulting in tubing that manages to bring opposing goals together in harmony and that will satisfy both amateur enthusiasts and experienced water cooling users! Manufactured in Germany, with the promise of consistent high quality. Our years of manufacturing experience guarantee that any product we sell is the best. Technical Specifications Material: PVC Colour: Transparent Inner diameter: 10mm, 3/8" Outer diameter: 16mm, 5/8" Wall thickness: 3mm Scope of Delivery 1x Alphacool tubing AlphaTube HF 16/10 (3/8"ID) - clear 3m (9,8ft) Retailbox

The Alphacool 6-32UNCx6 flat head Phillips screws can be used as spare parts.

Leistungsstarke VPP-Keramikpumpe, 340 l/h Durchflussleistung, 4,25 m Förderhöhe, leiser Betrieb, kompatibel mit D5-Formfaktor

The new Alphacool y-cable for 4-pin RGB connections allows users to connect up to three individual RGB components from the Alphacool RGB family to a single input, such as a motherboard header. This means that with an Alphacool y-cable, components can be controlled from any source such as a mainboard, graphics card, or RGB controller. This enables RGB systems like Asus Aura, MSI Mystic Light, or Gigabyte/AORUS RGB Fusion to synchronize Alphacool RGB products. The cable includes 4 female connectors with 4 male adapters. Technical Details: Connection: 1x 4-pin, 3x 4-pin Type: Y-cable Length: 30 cm Sleeving: black 4x male connectors Scope of Delivery: 1x Alphacool y-cable RGB 4pin to 3x 4pin 30cm incl. connector - black

Sleeved 3-pin to 2x 3-pin Y-splitter distribution cable. Distributes power supply and RPM singal to multiple fan connectors. Sleeving provides additional protection, stability and longer lifetime. Technical detailsLength15cmConnections3-Pin auf 2x 3-PinMaterialPlastic, sleevedColorblack

Sleeved 3-pin to 2x 3-pin Y-splitter distribution cable. Distributes power supply and RPM singal to multiple fan connectors. Sleeving provides additional protection, stability and longer lifetime. Technical detailsLength30cmConnections3-Pin auf 2x 3-PinMaterialPlastic, sleevedColorblack

Sleeved 3-pin to 2x 3-pin Y-splitter distribution cable. Distributes power supply and RPM singal to multiple fan connectors. Sleeving provides additional protection, stability and longer lifetime. Technical detailsLength60cmConnections3-Pin auf 2x 3-PinMaterialPlastic, sleevedColorblack

Sleeved 3-pin to 3x 3-pin Y-splitter distribution cable. Distributes power supply and RPM signal to multiple fan connectors. Sleeving provides additional protection, stability, and longer lifetime. Technical detailsLength15cmConnections3-Pin to 3x 3-PinMaterialPlastic, sleevedColorblack

Sleeved 3-pin to 3x 3-pin Y-splitter distribution cable. Distributes power supply and RPM singal to multiple fan connectors. Sleeving provides additional protection, stability and longer lifetime. Technical detailsLength30cmConnections3-Pin auf 3x 3-PinMaterialPlastic, sleevedColorblack

Sleeved 3-Pin to 4x 3-Pin Y-splitter distribution cable. Distributes power supply and RPM singal to multiple fan connectors. Sleeving provides additional protection, stability and longer lifetime. Technical detailsLength15cmConnections3-Pin auf 4x 3-PinMaterialPlastic, sleevedColorblack

Sleeved 3-Pin to 4x 3-Pin Y-splitter distribution cable. Distributes power supply and RPM singal to multiple fan connectors. Sleeving provides additional protection, stability and longer lifetime. Technical detailsLength60cmConnections3-Pin auf 4x 3-PinMaterialPlastic, sleevedColorblack

Sleeved 3-Pin to 4x 3-Pin Y-splitter distribution cable. Distributes power supply and RPM signal to multiple fan connectors. Sleeving provides additional protection, stability, and a longer lifetime. Technical detailsLength30cmConnections3-Pin to 4x 3-PinMaterialPlastic, sleevedColorblack

Gesleevetes PWM-Y-Splitterkabel, für Anschluss mehrerer PWM-Lüfter an einen Anschluss, 30 cm Länge, schwarz

Sleeved 4-Pin auf 2x 4-Pin Y-splitter distribution cable. Distributes power supply and PWM singal to multiple fan connectors. Sleeving provides additional protection, stability and longer lifetime. Technical detailsLength30cmConnections4-Pin to 2x 4-PinMaterialPlastic, sleevedColorwhite

Sleeved 4-Pin auf 2x 4-Pin Y-splitter distribution cable. Distributes power supply and PWM singal to multiple fan connectors. Sleeving provides additional protection, stability and longer lifetime. Technical detailsLength60cmConnections4-Pin to 2x 4-PinMaterialPlastic, sleevedColorwhite

Alphacool's 4-pin to 4x 4-pin Y-splitter cable is a high-quality solution to easily connect and control multiple PWM fans from the motherboard without the need for a separate fan control HUB. This cable is ideal for expanding the limited number of motherboard slots for these types of fans. With high-quality sleeving, the cable offers added protection, stability, and longer lifetime. The cable is offered in various lengths. Technical detailsLength60cmConnections1x 4-Pin to 3x 4-Pin PWMMaterialPlastic, sleevedColorblack

Alphacool's 4-pin to 4x 4-pin Y-splitter cable is a high-quality solution to easily control multiple PWM fans from the motherboard without the need for a separate fan control HUB. This cable is ideal for expanding the limited number of motherboard slots for these types of fans. With high-quality sleeving, the cable offers added protection, stability, and longer lifetime. The cable is offered in various lengths. Technical detailsLength30cmConnections1x 4-Pin to 4x 4-Pin PWMMaterialPlastic, sleevedColorwhite

Alphacool's 4-pin to 4x 4-pin Y-splitter cable is a high-quality solution to easily connect and control multiple PWM fans from the motherboard without the need for a separate fan control HUB. This cable is ideal for expanding the limited number of motherboard slots for these types of fans. With high-quality sleeving, the cable offers added protection, stability, and longer lifetime. The cable is offered in various lengths. Technical detailsLength60cmConnections1x 4-Pin to 4x 4-Pin PWMMaterialPlastic, sleevedColorwhite

Sleeved PWM Y-splitter cable for connecting multiple PWM fans to a single connector, 60 cm length, black

Sleeved 4-pin to 2x 4-pin Y-splitter distribution cable. Distributes power supply and PWM signal to multiple fan connectors. Sleeving provides additional protection, stability, and longer lifespan. Technical details Length: 15 cm Connections: 4-pin to 2x 4-pin Material: Plastic, sleeved Color: Black

Sleeved PWM Y-splitter cable, for connecting multiple PWM fans to a single connector, 15 cm length, white