Arvutitark OÜ

<p><strong>M4x10 Hexagon Socket</strong></p> <p>Angle adjustment for: 45° + 90° mandrels</p> <p> </p> <p><a href="https://www.alphacool.com/download/Eiskoffer_Manual.pdf" target="_blank"><span><strong>Manual</strong></span></a></p>

<p><strong>Flex Mandrel</strong></p> <p>Mandrel for especially large or freely adjustable radii. The radius can also be changed during use, i.e. it can be narrowed or widened. The middle radius is shown with a marking. Min. radius: 75 mm Max. radius: 165 mm.</p> <p>All bending mandrels and stoppers are designed for tube diameters of 12 or 13 mm and 16 mm. The necessary guidance is always aligned downwards.</p> <p> </p> <p><a href="https://www.alphacool.com/download/Eiskoffer_Manual.pdf" target="_blank"><span style="color: #0000ff;"><strong>Manual</strong></span></a></p>

<p>HardTube saw tool - mitre box from the new Eiskoffer set. With this mitre box, cutting HardTubes is a cinch. Its special rubberised channels for 13mm and 16mm HardTubes prevent the tubes from sliding around and getting scratched.</p> <p>The mitre box can be anchored with two small screw clamps.</p>

<p><strong>45° Mandrel</strong></p> <p><span style="text-decoration: underline;">2 versions for 3-dimensional bending, for</span><br>Tubes with 13 or 12 mm Ø </p> <p>The horizontal angle is freely adjustable over 180°. To adjust, loosen the back M4 screws using the included hexagon socket and set the desired angle with the 1° scale. Finally, tighten the screws again.<br>Select the correct version, to correspond with the diameter of your selected tube.</p> <p> </p> <p><span style="color: #0000ff;"><strong><a href="https://www.alphacool.com/download/Eiskoffer_Manual.pdf" target="_blank">Manual</a><br></strong></span></p>

<p><strong>90° Mandrel</strong></p> <p><span style="text-decoration: underline;">2 versions for 3-dimensional bending, for</span><br>Tubes with 13 or 12 mm Ø </p> <p>The horizontal angle is freely adjustable over 180°. To adjust, loosen the back M4 screws using the included hexagon socket and set the desired angle with the 1° scale. Finally, tighten the screws again.<br>Select the correct version, to correspond with the diameter of your selected tube.</p> <p> </p> <p><span><strong><a href="https://www.alphacool.com/download/Eiskoffer_Manual.pdf" target="_blank">Manual</a></strong></span></p>

<p><strong>45° Mandrel</strong></p> <p><span style="text-decoration: underline;">2 versions for 3-dimensional bending, for</span><br>Tubes with 16 mm Ø</p> <p>The horizontal angle is freely adjustable over 180°. To adjust, loosen the back M4 screws using the included hexagon socket and set the desired angle with the 1° scale. Finally, tighten the screws again.<br>Select the correct version, to correspond with the diameter of your selected tube.</p> <p> </p> <p><span><strong><a href="https://www.alphacool.com/download/Eiskoffer_Manual.pdf" target="_blank">Manual</a></strong></span></p>

<p><strong>90° Mandrel</strong></p> <p><span style="text-decoration: underline;">2 versions for 3-dimensional bending, for</span><br>Tubes with 16 mm Ø</p> <p>The horizontal angle is freely adjustable over 180°. To adjust, loosen the back M4 screws using the included hexagon socket and set the desired angle with the 1° scale. Finally, tighten the screws again.<br>Select the correct version, to correspond with the diameter of your selected tube.</p> <p> </p> <p><span><strong><a href="https://www.alphacool.com/download/Eiskoffer_Manual.pdf" target="_blank">Manual</a></strong></span></p>

<p><span>With the Alphacool measuring kit, measuring the lengths and angles needed to bend HardTubes accurately is quick and easy.</span></p> <p><span>The set includes rulers in different lengths, as well as corresponding angles and a distance metre. With the included screws, all the rulers can be attached to one another and can slide along their guiding slots. This lets you measure not just one angle but several angles and straight sections at the same time. Then, the screws can all be tightened so nothing slides around. Now the whole thing can be placed on a heat-proof surface and the HardTubes can be heated and bent with an Alphacool Heatgun.</span></p> <p><span>All components are made of aluminum, guaranteeing high stability and a long lifespan.</span></p> <p><strong>Scope of Delivery</strong></p> <ul> <li>1x Alphacool Eiskoffer - measuring kit</li> </ul>

<p><strong>Multi Mandrel</strong></p> <p>possible angles: 30°, 45°, 60°, 90°</p> <p><strong>Big version</strong><br>Tubes with 13 or 12 mm Ø are bent around a 33.5 mm radius Tubes with 16 mm Ø are bent around a 32 mm radius</p> <p>Do not bend over a total angle of 180°, so that you can still remove the tube when it has cooled.</p> <p>All bending mandrels and stoppers are designed for tube diameters of 12 or 13 mm and 16 mm. The necessary guidance is always aligned downwards.</p> <p> </p> <p><a href="https://www.alphacool.com/download/Eiskoffer_Manual.pdf" target="_blank"><strong>Manual</strong></a></p>

<p><strong>Multi Mandrel</strong></p> <p>possible angles: 30°, 45°, 60°, 90°</p> <p><strong>Small version</strong><br>Tubes with 13 or 12 mm Ø are bent around a 23.5 mm radius Tubes with 16 mm Ø are bent around a 22 mm radius</p> <p>Do not bend over a total angle of 180°, so that you can still remove the tube when it has cooled.</p> <p>All bending mandrels and stoppers are designed for tube diameters of 12 or 13 mm and 16 mm. The necessary guidance is always aligned downwards.</p> <p> </p> <p><a href="https://www.alphacool.com/download/Eiskoffer_Manual.pdf" target="_blank"><strong>Manual</strong></a></p>

<p><strong>Rulers</strong></p> <p>For measuring the distance between the fi ttings you want to join. You can also connect the rulers to one another or mount them to bending plate to carry over measurement results.</p> <p> </p> <p><a href="https://www.alphacool.com/download/Eiskoffer_Manual.pdf" target="_blank"><span><strong>Manual</strong></span></a></p>

<p><strong>Rulers</strong></p> <p>For measuring the distance between the fi ttings you want to join. You can also connect the rulers to one another or mount them to bending plate to carry over measurement results.</p> <p> </p> <p><a href="https://www.alphacool.com/download/Eiskoffer_Manual.pdf" target="_blank"><strong>Manual</strong></a></p>

<p><strong>Rulers</strong></p> <p>For measuring the distance between the fi ttings you want to join. You can also connect the rulers to one another or mount them to bending plate to carry over measurement results.</p> <p> </p> <p><a href="https://www.alphacool.com/download/Eiskoffer_Manual.pdf" target="_blank"><span><strong>Manual</strong></span></a></p>

<p><strong>Rulers</strong></p> <p>For measuring the distance between the fi ttings you want to join. You can also connect the rulers to one another or mount them to bending plate to carry over measurement results.</p> <p> </p> <p><a href="https://www.alphacool.com/download/Eiskoffer_Manual.pdf" target="_blank"><span><strong>Manual</strong></span></a></p>

<p><strong>Screw Clamps</strong></p> <p>For mounting the mitre box directly onto a table.</p> <p> </p> <p><a href="https://www.alphacool.com/download/Eiskoffer_Manual.pdf" target="_blank"><strong>Manual</strong></a></p>

<p><strong>M5 12/10 spacer</strong></p> <p><span style="text-decoration: underline;">Mounting of</span></p> <ul> <li>starting mount</li> <li>straight mandrel with stylus stopper</li> <li>multi-mandrel</li> <li>arc mandrel</li> <li>flex mandrel</li> <li>45° + 90° mandrels Rulers</li> <li>Angle rulers</li> </ul> <p> </p> <p><a href="https://www.alphacool.com/download/Eiskoffer_Manual.pdf" target="_blank"><strong>Manual</strong></a></p>

<p><strong>M5 Washers</strong></p> <p><span style="text-decoration: underline;">Mounting of</span></p> <ul> <li>starting mount</li> <li>straight mandrel with stylus stopper</li> <li>multi-mandrel</li> <li>arc mandrel</li> <li>flex mandrel</li> <li>45° + 90° mandrels Rulers</li> <li>Angle rulers</li> </ul> <p> </p> <p><a href="https://www.alphacool.com/download/Eiskoffer_Manual.pdf" target="_blank"><strong>Manual</strong></a></p>

<p>There has been a huge increase in fans of water cooling and a lot rely on HardTubes for aesthetic and practical reasons. It is important that the tubes are bent with precision to fit the loop perfectly. To achieve this, the Alphacool Eiskoffer Basic contains several tools to bend the HardTubes optimally. Only a hot air gun and a saw are needed to cut the HardTubes to the desired length. Using the Eiskoffer Basic will ensure that you can create perfect bends like a professional. It also takes the guess work away from the build, meaning the assembly of the water cooling will be much easier.</p> <p>The EIskoffer Basic contains two circular mandrels of different sizes and two multi-angle mandrels. This makes it easy to make all desired angles. All mandrels are designed for HardTubes with an outer diameter of 12, 13 or 16 mm. Two fitting stops are included so that the correct length can be measured immediately during bending. These simulate the depth of the Eiszapfen fittings. Two further mandrels with pin stop can be used in a variety of ways. Either as a support create multiple bending radii simultaneously, or as an end stop point.</p> <p>All mandrels and stops can be screwed onto any wooden board. The matching wood screws are included in the set. Two 80 cm long bending inserts for HardTubes with 10 and 13 mm inner diameter are included. This prevents the HardTubes from kinking whilst bending. Of course, such a set should not be without a deburring tool. This is important to round of the edges of the HardTubes after you have cut them. This ensures that the tube will push into the fitting easily and makes sure that you won’t damage the o-rings in the fitting when you push it in. The functions of all included tools are described in detail in the enclosed manual.</p> <p>The entire tool set comes in a sturdy flight case with thick foam to ensure that all the tools are kept safe and complete. This means that the tools can always be neatly packed back at the end of the work and the case can be neatly stowed in the desired place.</p> <p>The Eiskoffer Basic is the perfect companion for bending HardTube and will allow you to bend like a professional in no time!</p> <p><strong>Technical Details</strong></p> <ul> <li>Dimensions (LxWxH): 440 x 300 x 97mm</li> <li>Material mandrels: Nylon</li> <li>Compatible tube sizes: 13 and 16mm inner diameter</li> </ul> <p> </p> <p><strong>Scope of Delivery</strong></p> <ul> <li>1x Alphacool Eiskoffer Basic - bending kit</li> </ul>

<p>More and more fans of water cooling rely on HardTubes for aesthetic and practical reasons. The great challenge for the user is that the pipes need to be bent to fit the water loop. To make this possible, the Alphacool Eiskoffer Light contains most of the tools required to bend the HardTubes quickly and effectively. All you need is a hot air gun and a saw to cut the HardTubes to the desired length. This not only ensures a fantastic looking system, but also makes the assembly of the water cooling much easier.</p> <p>The Alphacool Eiskoffer Light contains a large circular and a multi-sheet mandrel. This makes it easy to make all desired angles. All mandrels are designed for HardTubes with an outer diameter of 12, 13 or 16 mm. Two fitting stops are included so that the correct length can be measured immediately during bending. These simulate the depth of the Eiszapfen fittings. Four additional feeders with pin stops can be used in a variety of ways. Either as a support to create several radii simultaneously, or as an end stop point.</p> <p>All feeders and stops can be screwed onto any wooden board. The matching wood screws are included in the set. Two 80 cm long bending inserts for HardTubes with 10 and 13 mm inner diameter are available so that bending of the HardTubes is done correctly. The functions of all included tools are described in detail in the enclosed manual.</p> <p>The entire tool comes in a sturdy cardboard box. All tools are embedded in thick foam so that the tool is safely stowed away. This means that the tool can always be neatly packed back at the end of the work and the case can be neatly stowed in the desired place.</p> <p>With the Eiskoffer Light you get a perfect start into your HardTube bending journey, ensuring professional looking bends straight out of the box.</p> <p><strong>Technical Details</strong></p> <ul> <li>Dimensions (LxWxH): 382 x 332 x 67mm</li> <li>Material mandrels: Nylon</li> <li>Compatible tube sizes: 13 and 16mm inner diameter</li> </ul> <p> </p> <p><strong>Scope of Delivery</strong></p> <ul> <li>1x Alphacool Eiskoffer Light - bending kit</li> </ul>

Hochwertiges Werkzeugset zum Bearbeiten von 13 oder 16 mm Hardtubes, Werkzeug & Winkel im edlen Werkzeugkoffer

<p>The Alphacool Eisrohr PETG HardTube givse the user the possibility to create a very special look. With a wall thickness of 3 mm, the tubes are very strong, but can still be bent without great effort and they are easy to fit. PETG HardTubes are probably the easiest to bend compared to those made of other materials. They require significantly less heat than PMMA HardTubes, for example. The Alphacool Eisrohr PETG HardTubes are absolutely clear and will look great in almost every water cooling loop. When cutting the tubes, make sure to chamfer the edges with fine file , sandpaper or the Alphacool Strong Guy pipe and hose deburrer, as sharp edges can damage the O-rings of fittings.<br><br><br><strong>Technical data:</strong><br>Outer diameter: 12 mm<br>Inner diameter: 9 mm<br>Length: 80 cm<br>Material: PETG clear<br>Net weight: 50 g <br><br><strong>Download data sheet PDF: </strong><a href="https://www.alphacool.com/download/ENG_1019800_Alphacool_Eisrohr_12-9mm_PETG_HardTube_80cm_-_4pcs_Set.pdf" rel="nofollow" target="_blank"><strong>Alphacool Eisrohr 12/9mm PETG HardTube 80cm - 4pcs<br></strong></a></p>

<p>HardTubes enjoy great popularity, and Alphacool is constantly offering new products in this area. Anyone who want to see clear, clean lines in their computer can hardly go without them.</p> <p>The most popular HardTubes are clear and transparent. HardTubes made of brass and carbon are also catching on. Now, under its “Eis” product line, Alphacool is offering the “Eisrohr”. Its surface gives off the appearance of ice and feels like it too – somewhat rough, but still smooth.</p> <p>With the “Eisrohr”, you effectively change the look of your system. You can especially see its true effects after refilling the system. The water has the appearance of frosted ice. With clear HardTubes, when the system is lit by LEDs, you see the reflection of each individual LED very clearly. Not so with the “Eisrohr”. Instead, the light is diffused and you get a softer, better illumination. </p> <p><strong>Notice:</strong><br>The “Eisrohr”, like all acrylic HardTubes, can be bent with the proper bending tools.</p> <p><strong>Technical Details:</strong></p> <ul> <li>Material: PMMA (acryl)</li> <li>Length: 80cm</li> </ul> <p><strong>Scope of delivery:</strong></p> <ul> <li>1x Alphacool Eisrohr 13/10mm plexi (PMMA) satin 80cm - 4pcs</li> </ul>

<p>The HardTube Project is becoming a reality. Alphacool is setting out on a new path and making great strides!</p> <p>Before now, the most common approach to water cooling was to use normal PVC tubes – now Alphacool is offering a new way to configure your water cooling system. The HardTube variants bring more order into your system, which gives off a more structured impression.</p> <p>The newest are the brass tubes, available in black chrome and chrome, as well as acrylic tubes, carbon, and borosilicate glass. With their fitted connectors and simply-designed functionality, they can be connected to each other with an absolutely tight seal. The PETG-tubes can be bent with the appropriate bending tools in order to fit into any system easily, without needing any additional angled pieces. In order to install the tubes into the system, they need to be sawn to the correct length.</p> <p>PETG tubes can be bent at lower temperatures than acrylic and are generally more flexible and easier to handle.</p> <p><strong>Technical Details:</strong></p> <ul> <li>Material: PETG</li> <li>Length: 60cm</li> </ul> <p><strong>Scope of delivery:</strong></p> <ul> <li>1x Alphacool Eisrohr 13/10mm PETG 60cm - 4pcs</li> </ul>

<p>The HardTube Project is becoming a reality. Alphacool is setting out on a new path and making great strides!</p> <p>Before now, the most common approach to water cooling was to use normal PVC tubes – now Alphacool is offering a new way to configure your water cooling system. The HardTube variants bring more order into your system, which gives off a more structured impression.</p> <p>The newest are the brass tubes, available in black chrome and chrome, as well as acrylic tubes, carbon, and borosilicate glass. With their fitted connectors and simply-designed functionality, they can be connected to each other with an absolutely tight seal. The PETG-tubes can be bent with the appropriate bending tools in order to fit into any system easily, without needing any additional angled pieces. In order to install the tubes into the system, they need to be sawn to the correct length.</p> <p>PETG tubes can be bent at lower temperatures than acrylic and are generally more flexible and easier to handle.</p> <p><strong>Technical Details:</strong></p> <ul> <li>Material: PETG</li> <li>Length: 80cm</li> </ul> <p><strong>Scope of delivery:</strong></p> <ul> <li>1x Alphacool Eisrohr 13/10mm PETG 80cm - 4pcs</li> </ul>

<p>The Alphacool Eisrohr PETG HardTube givse the user the possibility to create a very special look. With a wall thickness of 3 mm, the tubes are very strong, but can still be bent without great effort and they are easy to fit. PETG HardTubes are probably the easiest to bend compared to those made of other materials. They require significantly less heat than PMMA HardTubes, for example. The Alphacool Eisrohr PETG HardTubes are absolutely clear and will look great in almost every water cooling loop. When cutting the tubes, make sure to chamfer the edges with fine file , sandpaper or the Alphacool Strong Guy pipe and hose deburrer, as sharp edges can damage the O-rings of fittings.<br><br><br><strong>Technical data:</strong><br>Outer diameter: 14 mm<br>Inner diameter: 11 mm<br>Length: 80 cm<br>Material: PETG clear<br>Net weight: 58 g <br><br><strong>Download data sheet PDF: </strong><a href="https://www.alphacool.com/download/ENG_1019801_Alphacool_Eisrohr_14-11mm_PETG_HardTube_80cm_-_4pcs_Set.pdf" rel="nofollow" target="_blank"><strong>Alphacool Eisrohr 14/11mm PETG HardTube 80cm - 4pcs<br></strong></a></p>

<p>The HardTube Project is becoming a reality. Alphacool is setting out on a new path and making great strides!</p> <p>Before now, the most common approach to water cooling was to use normal PVC tubes – now Alphacool is offering a new way to configure your water cooling system. The HardTube variants bring more order into your system, which gives off a more structured impression.</p> <p>The newest are the brass tubes, available in black chrome and chrome, as well as acrylic tubes, carbon, and borosilicate glass. With their fitted connectors and simply-designed functionality, they can be connected to each other with an absolutely tight seal. The PETG-tubes can be bent with the appropriate bending tools in order to fit into any system easily, without needing any additional angled pieces. In order to install the tubes into the system, they need to be sawn to the correct length.</p> <p>PETG tubes can be bent at lower temperatures than acrylic and are generally more flexible and easier to handle.</p> <p><strong>Technical Details:</strong></p> <ul> <li>Material: PETG</li> <li>Length: 60cm</li> </ul> <p><strong>Scope of delivery:</strong></p> <ul> <li>1x Alphacool Eisrohr 16/13mm PETG 60cm - 4pcs</li> </ul>

<p>The HardTube Project is becoming a reality. Alphacool is setting out on a new path and making great strides!</p> <p>Before now, the most common approach to water cooling was to use normal PVC tubes – now Alphacool is offering a new way to configure your water cooling system. The HardTube variants bring more order into your system, which gives off a more structured impression.</p> <p>The newest are the brass tubes, available in black chrome and chrome, as well as acrylic tubes, carbon, and borosilicate glass. With their fitted connectors and simply-designed functionality, they can be connected to each other with an absolutely tight seal. The PETG-tubes can be bent with the appropriate bending tools in order to fit into any system easily, without needing any additional angled pieces. In order to install the tubes into the system, they need to be sawn to the correct length.</p> <p>PETG tubes can be bent at lower temperatures than acrylic and are generally more flexible and easier to handle.</p> <p><strong>Technical Details:</strong></p> <ul> <li>Material: PETG</li> <li>Length: 80cm</li> </ul> <p><strong>Scope of delivery:</strong></p> <ul> <li>1x Alphacool Eisrohr 16/13mm PETG 80cm - 4pcs</li> </ul>

<p>HardTubes enjoy great popularity, and Alphacool is constantly offering new products in this area. Anyone who want to see clear, clean lines in their computer can hardly go without them.</p> <p>The most popular HardTubes are clear and transparent. HardTubes made of brass and carbon are also catching on. Now, under its “Eis” product line, Alphacool is offering the “Eisrohr”. Its surface gives off the appearance of ice and feels like it too – somewhat rough, but still smooth.</p> <p>With the “Eisrohr”, you effectively change the look of your system. You can especially see its true effects after refilling the system. The water has the appearance of frosted ice. With clear HardTubes, when the system is lit by LEDs, you see the reflection of each individual LED very clearly. Not so with the “Eisrohr”. Instead, the light is diffused and you get a softer, better illumination. </p> <p><strong>Notice:</strong><br>The “Eisrohr”, like all acrylic HardTubes, can be bent with the proper bending tools.</p> <p><strong>Technical Details:</strong></p> <ul> <li>Material: PMMA (acryl)</li> <li>Length: 80cm</li> </ul> <p><strong>Scope of delivery:</strong></p> <ul> <li>1x Alphacool Eisrohr 16/13mm plexi (PMMA) satin 80cm - 4pcs</li> </ul>

<p style="text-align: justify;">Alphacool's ultimate solution lets you cool your computer with a sheet of ice. Not an ice sheet in the conventional sense, made of frozen water, but a sheet that brings every chip down to freezing. The properties of these new thermal pads speak for themselves.<br /><br />The light version of the Alphacool Eisschicht ("ice sheet") is the "small and weak" version at 7W/mK, but is definitely strong enough. Any hardware components can now be put together neatly and easily with thermal pads. <br /><br />The Alphacool Eisschicht offers all the benefits and typical qualities of a thermal pad: self-adhesive, elastic, flexible, and much more! Just as varied are the options for placement: whether on RAM or motherboard coolers, or graphics card and CPU coolers, any place where chips meet cooler bodies is a good place for an Alphacool Eisschicht.<br /><br />The Eisschicht Light, with a performance level of 7W/mK, is available in 0.5mm, 1mm, and 1.5mm thicknesses. Perfect for levelling height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers) sizes. These can easily be cut with scissors to get the right size for any component.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>100 x 100 x 0,5mm</td></tr><tr><td>Thermal conductivity</td><td>7W/mK</td></tr><tr><td>Color</td><td>pink</td></tr></table><br></p>

<p>Alphacool's ultimate solution lets you cool your computer with a sheet of ice. Not an ice sheet in the conventional sense, made of frozen water, but a sheet that brings every chip down to freezing. The properties of these new thermal pads speak for themselves.</p> <p>The light version of the Alphacool Eisschicht ("ice sheet") is the "small and weak" version at 7W/mK, but is definitely strong enough. Any hardware components can now be put together neatly and easily with thermal pads. </p> <p>The Alphacool Eisschicht offers all the benefits and typical qualities of a thermal pad: self-adhesive, elastic, flexible, and much more! Just as varied are the options for placement: whether on RAM or motherboard coolers, or graphics card and CPU coolers, any place where chips meet cooler bodies is a good place for an Alphacool Eisschicht.</p> <p>The Eisschicht Light, with a performance level of 7W/mK, is available in 0.5mm, 1mm, and 1.5mm thicknesses. Perfect for levelling height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers) sizes. These can easily be cut with scissors to get the right size for any component.</p> <p><strong>Technical Specifications</strong></p> <ul> <li>Dimensions: 100 x 100 x 1.5mm</li> <li>7W/mK</li> </ul> <p><strong>Scope of Delivery</strong></p> <ul> <li>1x Alphacool Eisschicht Light Thermal Pad - 7W/mK 100x100x1.5mm</li> </ul>

<p>Alphacool's ultimate solution lets you cool your computer with a sheet of ice. Not an ice sheet in the conventional sense, made of frozen water, but a sheet that brings every chip down to freezing. The properties of these new thermal pads speak for themselves.</p> <p>The light version of the Alphacool Eisschicht ("ice sheet") is the "small and weak" version at 7W/mK, but is definitely strong enough. Any hardware components can now be put together neatly and easily with thermal pads. </p> <p>The Alphacool Eisschicht offers all the benefits and typical qualities of a thermal pad: self-adhesive, elastic, flexible, and much more! Just as varied are the options for placement: whether on RAM or motherboard coolers, or graphics card and CPU coolers, any place where chips meet cooler bodies is a good place for an Alphacool Eisschicht.</p> <p>The Eisschicht Light, with a performance level of 7W/mK, is available in 0.5mm, 1mm, and 1.5mm thicknesses. Perfect for levelling height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers) sizes. These can easily be cut with scissors to get the right size for any component.</p> <p><strong>Technical Specifications</strong></p> <ul> <li>Dimensions: 100 x 100 x 1mm</li> <li>7W/mK</li> </ul> <p><strong>Scope of Delivery</strong></p> <ul> <li>1x Alphacool Eisschicht Light Thermal Pad - 7W/mK 100x100x1mm</li> </ul>

<p>Alphacool's ultimate solution lets you cool your computer with a sheet of ice. Not an ice sheet in the conventional sense, made of frozen water, but a sheet that brings every chip down to freezing. The properties of these new thermal pads speak for themselves.</p> <p>The light version of the Alphacool Eisschicht ("ice sheet") is the "small and weak" version at 7W/mK, but is definitely strong enough. Any hardware components can now be put together neatly and easily with thermal pads. </p> <p>The Alphacool Eisschicht offers all the benefits and typical qualities of a thermal pad: self-adhesive, elastic, flexible, and much more! Just as varied are the options for placement: whether on RAM or motherboard coolers, or graphics card and CPU coolers, any place where chips meet cooler bodies is a good place for an Alphacool Eisschicht.</p> <p>The Eisschicht Light, with a performance level of 7W/mK, is available in 0.5mm, 1mm, and 1.5mm thicknesses. Perfect for levelling height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers) sizes. These can easily be cut with scissors to get the right size for any component.</p> <p><strong>Technical Specifications</strong></p> <ul> <li>Dimensions: 120 x 20 x 0.5mm</li> <li>7W/mK</li> </ul> <p><strong>Scope of Delivery</strong></p> <ul> <li>1x Alphacool Eisschicht Light Thermal Pad - 7W/mK 120x20x0.5mm</li> </ul>

<p>Alphacool's ultimate solution lets you cool your computer with a sheet of ice. Not an ice sheet in the conventional sense, made of frozen water, but a sheet that brings every chip down to freezing. The properties of these new thermal pads speak for themselves.</p> <p>The light version of the Alphacool Eisschicht ("ice sheet") is the "small and weak" version at 7W/mK, but is definitely strong enough. Any hardware components can now be put together neatly and easily with thermal pads. </p> <p>The Alphacool Eisschicht offers all the benefits and typical qualities of a thermal pad: self-adhesive, elastic, flexible, and much more! Just as varied are the options for placement: whether on RAM or motherboard coolers, or graphics card and CPU coolers, any place where chips meet cooler bodies is a good place for an Alphacool Eisschicht.</p> <p>The Eisschicht Light, with a performance level of 7W/mK, is available in 0.5mm, 1mm, and 1.5mm thicknesses. Perfect for levelling height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers) sizes. These can easily be cut with scissors to get the right size for any component.</p> <p><strong>Technical Specifications</strong></p> <ul> <li>Dimensions: 120 x 20 x 1.5mm</li> <li>7W/mK</li> </ul> <p><strong>Scope of Delivery</strong></p> <ul> <li>1x Alphacool Eisschicht Light Thermal Pad - 7W/mK 120x20x1.5mm</li> </ul>

<p>Alphacool's ultimate solution lets you cool your computer with a sheet of ice. Not an ice sheet in the conventional sense, made of frozen water, but a sheet that brings every chip down to freezing. The properties of these new thermal pads speak for themselves.</p> <p>The light version of the Alphacool Eisschicht ("ice sheet") is the "small and weak" version at 7W/mK, but is definitely strong enough. Any hardware components can now be put together neatly and easily with thermal pads. </p> <p>The Alphacool Eisschicht offers all the benefits and typical qualities of a thermal pad: self-adhesive, elastic, flexible, and much more! Just as varied are the options for placement: whether on RAM or motherboard coolers, or graphics card and CPU coolers, any place where chips meet cooler bodies is a good place for an Alphacool Eisschicht.</p> <p>The Eisschicht Light, with a performance level of 7W/mK, is available in 0.5mm, 1mm, and 1.5mm thicknesses. Perfect for levelling height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers) sizes. These can easily be cut with scissors to get the right size for any component.</p> <p><strong>Technical Specifications</strong></p> <ul> <li>Dimensions: 120 x 20 x 1mm</li> <li>7W/mK</li> </ul> <p><strong>Scope of Delivery</strong></p> <ul> <li>1x Alphacool Eisschicht Light Thermal Pad - 7W/mK 120x20x1mm</li> </ul>

<p>Alphacool's ultimate solution lets you cool your computer with a sheet of ice. Not an ice sheet in the conventional sense, made of frozen water, but a sheet that brings every chip down to freezing. The properties of these new thermal pads speak for themselves.</p> <p>The Alphacool Eisschicht offers all the benefits and typical qualities of a thermal pad: self-adhesive, elastic, flexible, and much more! Just as varied are the options for placement: whether on RAM or motherboard coolers, or graphics card and CPU coolers, any place where chips meet cooler bodies is a good place for an Alphacool Eisschicht.</p> <p>The Eisschicht Light, with a performance level of 7W/mK, is available in 0.5mm, 1mm, and 1.5mm thicknesses. Perfect for levelling height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers) sizes. These can easily be cut with scissors to get the right size for any component.</p> <p><strong>Download data sheet PDF: <a href="https://www.alphacool.com/download/ENG_1014948_Alphacool_Eisschicht_Light_thermal_pad_-_7W-mK_14x14x1mm.pdf">Alphacool Eisschicht Light thermal pad 7W/mK 14x14x1mm</a></strong></p>

<p class="p1"><span class="s1">Alphacool</span><span class="s1">’s</span><span class="s1"> ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad:</span></p> <p class="p1"><span class="s1">With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. </span>So now practically all hardware components can be easily and cleanly covered with ice! </p> <p class="p1"><span class="s1">The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht.</span> </p> <p class="p1"><span class="s1">The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.</span></p>

<p class="p1"><span class="s1">Alphacool</span><span class="s1">’s</span><span class="s1"> ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad:</span></p> <p class="p1"><span class="s1">With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. </span>So now practically all hardware components can be easily and cleanly covered with ice! </p> <p class="p1"><span class="s1">The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht.</span> </p> <p class="p1"><span class="s1">The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.</span></p>

<p class="p1"><span class="s1">Alphacool</span><span class="s1">’s</span><span class="s1"> ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad:</span></p> <p class="p1"><span class="s1">With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. </span>So now practically all hardware components can be easily and cleanly covered with ice! </p> <p class="p1"><span class="s1">The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht.</span> </p> <p class="p1"><span class="s1">The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.</span></p>

<p class="p1"><span class="s1">Alphacool</span><span class="s1">’s</span><span class="s1"> ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad:</span></p> <p class="p1"><span class="s1">With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. </span>So now practically all hardware components can be easily and cleanly covered with ice! </p> <p class="p1"><span class="s1">The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht.</span> </p> <p class="p1"><span class="s1">The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.</span></p>

<p class="p1"><span class="s1">Alphacool</span><span class="s1">’s</span><span class="s1"> ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad:</span></p> <p class="p1"><span class="s1">With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. </span>So now practically all hardware components can be easily and cleanly covered with ice! </p> <p class="p1"><span class="s1">The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht.</span> </p> <p class="p1"><span class="s1">The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.</span></p>

<p class="p1"><span class="s1">Alphacool</span><span class="s1">’s</span><span class="s1"> ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad:</span></p> <p class="p1"><span class="s1">With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. </span>So now practically all hardware components can be easily and cleanly covered with ice! </p> <p class="p1"><span class="s1">The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht.</span> </p> <p class="p1"><span class="s1">The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.</span></p>

<p class="p1"><span class="s1">Alphacool</span><span class="s1">’s</span><span class="s1"> ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad:</span></p> <p class="p1"><span class="s1">With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. </span>So now practically all hardware components can be easily and cleanly covered with ice! </p> <p class="p1"><span class="s1">The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht.</span> </p> <p class="p1"><span class="s1">The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.</span></p>

<p class="p1"><span class="s1">Alphacool</span><span class="s1">’s</span><span class="s1"> ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad:</span></p> <p class="p1"><span class="s1">With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. </span>So now practically all hardware components can be easily and cleanly covered with ice! </p> <p class="p1"><span class="s1">The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht.</span> </p> <p class="p1"><span class="s1">The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.</span></p>

<p class="p1"><span class="s1">Alphacool</span><span class="s1">’s</span><span class="s1"> ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad:</span></p> <p class="p1"><span class="s1">With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. </span>So now practically all hardware components can be easily and cleanly covered with ice! </p> <p class="p1"><span class="s1">The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht.</span> </p> <p class="p1"><span class="s1">The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.</span></p>

<p class="p1"><span class="s1">Alphacool</span><span class="s1">’s</span><span class="s1"> ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad:</span></p> <p class="p1"><span class="s1">With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. </span>So now practically all hardware components can be easily and cleanly covered with ice! </p> <p class="p1"><span class="s1">The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht.</span> </p> <p class="p1"><span class="s1">The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.</span></p>

<p class="p1"><span class="s1">Alphacool</span><span class="s1">’s</span><span class="s1"> ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad:</span></p> <p class="p1"><span class="s1">With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. </span>So now practically all hardware components can be easily and cleanly covered with ice! </p> <p class="p1"><span class="s1">The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht.</span> </p> <p class="p1"><span class="s1">The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.</span></p>

<p class="p1"><span class="s1">Alphacool</span><span class="s1">’s</span><span class="s1"> ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad:</span></p> <p class="p1"><span class="s1">With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. </span>So now practically all hardware components can be easily and cleanly covered with ice! </p> <p class="p1"><span class="s1">The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht.</span> </p> <p class="p1"><span class="s1">The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.</span></p>

<p class="p1"><span class="s1">Alphacool</span><span class="s1">’s</span><span class="s1"> ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad:</span></p> <p class="p1"><span class="s1">With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. </span>So now practically all hardware components can be easily and cleanly covered with ice! </p> <p class="p1"><span class="s1">The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht.</span> </p> <p class="p1"><span class="s1">The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.</span></p>

<p class="p1"><span class="s1">Alphacool</span><span class="s1">’s</span><span class="s1"> ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad:</span></p> <p class="p1"><span class="s1">With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. </span>So now practically all hardware components can be easily and cleanly covered with ice! </p> <p class="p1"><span class="s1">The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht.</span> </p> <p class="p1"><span class="s1">The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.</span></p>

<p class="p1"><span class="s1">Alphacool</span><span class="s1">’s</span><span class="s1"> ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad:</span></p> <p class="p1"><span class="s1">With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. </span>So now practically all hardware components can be easily and cleanly covered with ice! </p> <p class="p1"><span class="s1">The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht.</span> </p> <p class="p1"><span class="s1">The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.</span></p>

<p class="p1"><span class="s1">Alphacool</span><span class="s1">’s</span><span class="s1"> ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad:</span></p> <p class="p1"><span class="s1">With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. </span>So now practically all hardware components can be easily and cleanly covered with ice! </p> <p class="p1"><span class="s1">The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht.</span> </p> <p class="p1"><span class="s1">The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.</span></p>

<p class="p1"><span class="s1">Alphacool</span><span class="s1">’s</span><span class="s1"> ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad:</span></p> <p class="p1"><span class="s1">With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. </span>So now practically all hardware components can be easily and cleanly covered with ice! </p> <p class="p1"><span class="s1">The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht.</span> </p> <p class="p1"><span class="s1">The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.</span></p>

<p class="p1"><span class="s1">Alphacool</span><span class="s1">’s</span><span class="s1"> ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad:</span></p> <p class="p1"><span class="s1">With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. </span>So now practically all hardware components can be easily and cleanly covered with ice! </p> <p class="p1"><span class="s1">The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht.</span> </p> <p class="p1"><span class="s1">The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.</span></p>

<p style="text-align: justify;">The Eisschicht from Alphacool can, like other thermal pads, compensate for the irregularities of heat sinks and the elements to be cooled. But it has a great feature: The Eisschicht consists of thermal paste with an embedded mesh! This ensures that the performance of these pads is much more efficient than normal thermal pads, regardless of the low W/mK value. In addition, a better distribution and filling between the surfaces is achieved. This also results in better air displacement. Due to their soft consistency, there is also no pressure on components or solder joints. Nvidia also uses this kind of pads for the Founders Edition. The Eisschicht can be easily cut to the desired size and attached to heat sinks without slipping.<br /><br />As a basic component or spare part, thermal pads belong in every well-organized computer tinkering corner!<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>100 x 100 x 0,5mm</td></tr><tr><td>Thermal conductivity</td><td>3 W/mK</td></tr><tr><td>Electrical Conductive</td><td>No</td></tr><tr><td>Color</td><td>white</td></tr></table><br></p>

<p style="text-align: justify;">The Eisschicht Ultra Soft are Alphacool's performance oriented solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. These Ultra Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance.<br /><br /><b>Better than standard thermal pads?</b><br />The material of the Ultra Soft thermal pads acts similar to a thermal paste. While normal thermal pads are only pressed together by the contact pressure there can be areas that are uneven due to different high components, making them less effective. With the ultra soft Eisschicht this problem doesn’t exist because the material distributes itself similar to thermal paste and thus prevents the highest components from being subjected to increased contact pressure by the cooler. As standard thermal pads are quite stiff they can also cause too much pressure on components. In the worst cases, this can cause the PCB to bend and even break. Due to the soft consistency of the Ultra Soft Eisschicht any excess material can spread out rather than cause problems. The Ultra Soft Eisschicht is not only performance orientated, but also safer!<br /><br /><b>But this is not the only advantage!</b><br />Moreover, the special material cannot dry out. Usually the silicone in thermal pads bleeds out over time. This makes them hard and the performance of the pads drops rapidly from a certain point. This is not the case with the Ultra Soft Eisschicht. They can be used over a much longer period of time without significantly losing performance.<br /><br /><b>A thermal pad with fabric?</b><br />The consistency of the heat conducting material is similar to a viscous heat conducting paste. A special fabric is embedded so that the material remains stable and can be used as a thermal pad. This ensures a perfect distribution of the material if the element to be cooled has an uneven shape. Examples include voltage transformers, VRam and similar electronic components of all kinds that require cooling.<br /><br /><b>Cutting? No problem!</b><br />To cut the thermal pads to size, you should definitely leave the foil on the pads. So the pads can easily be cut to size with a pair of scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data</b></td></tr><tr><td>L x W x H</td><td>100 x 100 x 1,5mm</td></tr><tr><td>Specific Gravitiy ASTM D297</td><td>2,65 g/cc</td></tr><tr><td>Thermal Conductivity ASTM D5470</td><td>3.0 W/mK</td></tr><tr><td>Hardness ASTM 2240</td><td>20 Shore 00</td></tr><tr><td>Working temperature</td><td>40 to 200°C</td></tr><tr><td>Outgassing ASTM E595</td><td>0,40% TML</td></tr><tr><td>Volume Resistivity ASTM D257</td><td>6.2X10 high 13 Ohm-meter</td></tr><tr><td>Dielectric Constant ASTM D150</td><td>5,5 MHz</td></tr><tr><td>Dielectric Breakdown Voltage ASTM D149</td><td>>5000 VAC</td></tr><tr><td>Flame Rating UL E331100</td><td>94 V0</td></tr><tr><td>Color</td><td>white</td></tr></table><br></p>

<p>The Eisschicht from Alphacool can, like other heat thermal pads, compensate for the unevenness of heat sinks and the elements to be cooled. However, it has a great special feature: the Eisschicht consists of heat-conducting paste with a fabric embedded in it! This ensures that the performance of these pads is significantly more efficient than that of normal heat conduction pads, regardless of the low W/mK value. Furthermore, a better distribution and filling between the surfaces is achieved. This results in a better air displacement and due to their soft consistency, there is also no pressure on components or solder joints. Nvidia, uses this type of pad wth the Founders Edition GPUs. Eisschicht can easily be cut to the desired size and attached to heat sinks without slipping.</p> <p>As a basic component or spare part, heat conduction pads belong in every well-organised computer builder’s toolbox!</p> <p><strong>Technical data:</strong></p> <ul> <li>Dimensions: 100 x 100 x 1 mm</li> <li>Quantity: 1</li> <li>Thermal conductivity: 3 W/mk</li> <li>Electrically conductive: No</li> </ul>

<p>The Alphacool Ultra soft Eisschicht is the next step in terms of thermal pads. Due to their outstanding properties, they can almost be compared directly to thermal paste. This is because the Ultra Soft Eisschicht moulds itself and clings much better to components, which contributes to excellent cooling performance.<br> <br> <strong>Better than standard thermal pads?<br> </strong>The material of the Ultra Soft thermal pads acts similar to a thermal paste. While normal thermal pads are only pressed together by the contact pressure there can be areas that are uneven due to different high components, making them less effective. With the ultra soft Eisschicht this problem doesn’t exist because the material distributes itself similar to thermal paste and thus prevents the highest components from being subjected to increased contact pressure by the cooler. As standard thermal pads are quite stiff they can also cause too much pressure on components. In the worst cases, this can cause the PCB to bend and even break. Due to the soft consistency of the Ultra Soft Eisschicht any excess material can spread out rather than cause problems. The Ultra Soft Eisschicht is not only performance orientated, but also safer!<br> <br> <strong>But this is not the only advantage!<br> </strong>Moreover, the special material cannot dry out. Usually the silicone in thermal pads bleeds out over time. This makes them hard and the performance of the pads drops rapidly from a certain point. This is not the case with the Ultra Soft Eisschicht. They can be used over a much longer period of time without significantly losing performance. <br> <br> <strong>A thermal pad with fabric?<br> </strong>The consistency of the heat conducting material is similar to a viscous heat conducting paste. A special fabric is embedded so that the material remains stable and can be used as a thermal pad. This ensures a perfect distribution of the material if the element to be cooled has an uneven shape. Examples include voltage transformers, VRam and similar electronic components of all kinds that require cooling. <br> <br> <strong>Cutting? No problem!<br> </strong>To cut the thermal pads to size, you should definitely leave the foil on the pads. So the pads can easily be cut to size with a pair of scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray. <br> <br> The Alphacool Eisschicht Ultra Soft Thermal Pads are superior to the usual thermal pads in many respects and are also used with all new Eisblock Aurora graphic cards coolers from Alphacool.<br><br><strong><br>Download data sheet PDF: <a href="https://www.alphacool.com/download/DE_1020490_Alphacool_Eisschicht_Ultra_Soft_thermal_pad_3W-mk_50x50x3mm.pdf">Alphacool Eisschicht Ultra Soft thermal pad 3W/mk 50x50x3mm</a></strong></p>

<p>This item is a replacement lid for the Alphacool Eisstation.<br>Compatible with all variants with item numbers: 15272, 15273, 15274</p>

<p>With the Alphacool Eisstation, you get a compact reservoir that fits into nearly any case. It comes in three different versions. A DDC, a D5, and a DC-LT version are available.</p> <p><strong>Highlights</strong></p> <ol start="1"> <li>The cap is made of sturdy Nylon</li> <li>Three versions for all current pumps</li> <li>Numerous mounting options</li> <li>Illuminated logo and LED mounting options</li> </ol> <p>The Alphacool Eisstation reservoir is extremely compact and is available in three versions suited for different pumps. D5, DDC and DC-LT versions are available. Each pump is installed in the bottom of the Eisstation and is not visible from the outside. The bottom of the Eisstation is a metal plate that reduces vibrations and increases the stability of the Eisstation.</p> <p><strong>Mounting possibilities</strong><br>The installation options are numerous and comprehensive. The Eisstation can be screwed onto a 2.5” SSD bracket. It can also be mounted in a 3,5” bay. In either case, the special decoupling screws included with the Eisstation are used for mounting it. This minimises the transfer of vibrations to the case, lowering the operating volume significantly. Another installation option is the included Velcro fastener. One part of the Velcro is glued to the bottom of the Eisstation, while the other part is glued to the case. Then all that’s left is to press the Eisstation’s bottom against the corresponding Velcro on the case. The size of the Velcro ensures secure positioning even during transport. <br>The Eisstation can be mounted vertically or horizontally, depending on personal taste and available space.</p> <p><strong>Connection possibilities</strong><br>There are four possibilities for connection. An IN and an OUT with G1/4 threads are located on the top, with the illuminated logo. The logo’s colour can be changed with the optional modding kit. In the cap, there is one G1/4” and one G3/8” connection available. The G3/8” connection, with its larger size, simplifies filling the Eisstation and can also serve as a lighting module for 5mm LEDs. Two additional 5mm LED places can be found in the bottom of the reservoir and illuminate the water-filled portion from below.</p> <p>A highlight of the Eisstation is the materials it is composed of. The bottom portion has a high-quality soft-touch surface which gives it an outstanding look and feel. The upper portion and the reservoir itself are not made of simple, easily breakable Plexiglas, but rather of extremely sturdy Nylon. While normal reservoirs made of glass or Plexiglas can break or crack due to falls, even from a small height, or due to improper handling, it is nearly impossible to damage the Eisstation’s clear container.</p> <p><strong>Technical Details</strong></p> <ul> <li>Dimensions (LxWxH): 102 x 82 x 89mm</li> <li>Capacity: 250ml</li> <li>Material: Nylon / PMMA</li> <li>In / Out: G1/4"</li> <li>Connections: 3x G1/4" and 1x G3/8"</li> <li>Power connection LED Logo: 3 Pin</li> <li>Lighting modules: 4x for 5mm LED's</li> </ul> <p><strong>Scope of Delivery</strong></p> <ul> <li>1x Alphacool Eisstation DDC - Solo reservoir</li> <li>1x Metal bottom</li> <li>Mounting screws</li> <li>4x Decoupling screws</li> <li>Self-adhesive velcro</li> </ul> <p> </p> <p><span style="color: #3366ff;" data-mce-mark="1"><a href="http://www.alphacool.com/download/Eisstation_Datasheet_EN.pdf" target="_blank"><span style="color: #3366ff;" data-mce-mark="1"><strong>Datasheet</strong></span></a></span></p> <p><span style="color: #3366ff;"><a href="http://www.alphacool.com/download/Eisstation_Anleitung.pdf" target="_blank"><span style="color: #3366ff;"><strong>Mounting manual</strong></span></a></span></p> <p><span style="color: #3366ff;"><a href="http://www.alphacool.com/download/stp/EisstationDDC_Shrink.zip" target="_self"><span style="color: #3366ff;"><span><strong>Download 3D-file (.stp)</strong></span></span></a></span></p>

<p>With the Alphacool Eisstation, you get a compact reservoir that fits into nearly any case. It comes in three different versions. A DDC, a D5, and a DC-LT version are available.</p> <p><strong>Note:</strong> The Alphacool VPP Apex pump (13339) is not compatible with this reservoir.</p> <p><strong>Highlights</strong></p> <ol start="1"> <li>The cap is made of sturdy Nylon</li> <li>Three versions for all current pumps</li> <li>Numerous mounting options</li> <li>Illuminated logo and LED mounting options</li> </ol> <p>The Alphacool Eisstation reservoir is extremely compact and is available in three versions suited for different pumps. D5, DDC and DC-LT versions are available. Each pump is installed in the bottom of the Eisstation and is not visible from the outside. The bottom of the Eisstation is a metal plate that reduces vibrations and increases the stability of the Eisstation.</p> <p><strong>Mounting possibilities</strong><br>The installation options are numerous and comprehensive. The Eisstation can be screwed onto a 2.5” SSD bracket. It can also be mounted in a 3,5” bay. In either case, the special decoupling screws included with the Eisstation are used for mounting it. This minimises the transfer of vibrations to the case, lowering the operating volume significantly. Another installation option is the included Velcro fastener. One part of the Velcro is glued to the bottom of the Eisstation, while the other part is glued to the case. Then all that’s left is to press the Eisstation’s bottom against the corresponding Velcro on the case. The size of the Velcro ensures secure positioning even during transport. <br>The Eisstation can be mounted vertically or horizontally, depending on personal taste and available space.</p> <p><strong>Connection possibilities</strong><br>There are four possibilities for connection. An IN and an OUT with G1/4 threads are located on the top, with the illuminated logo. In the cap, there is one G1/4” and one G3/8” connection available. The G3/8” connection, with its larger size, simplifies filling the Eisstation and can also serve as a lighting module for 5mm LEDs. Two additional 5mm LED places can be found in the bottom of the reservoir and illuminate the water-filled portion from below.</p> <p>A highlight of the Eisstation is the materials it is composed of. The bottom portion has a high-quality soft-touch surface which gives it an outstanding look and feel. The upper portion and the reservoir itself are not made of simple, easily breakable Plexiglas, but rather of extremely sturdy Nylon. While normal reservoirs made of glass or Plexiglas can break or crack due to falls, even from a small height, or due to improper handling, it is nearly impossible to damage the Eisstation’s clear container.</p> <p><strong>Technical Details</strong></p> <ul> <li>Dimensions (LxWxH): 102 x 82 x 105mm</li> <li>Capacity: 250ml</li> <li>Material: Nylon / PMMA</li> <li>In / Out: G1/4"</li> <li>Connections: 3x G1/4" and 1x G3/8"</li> <li>Power connection LED Logo: 3 Pin</li> <li>Lighting modules: 4x for 5mm LED's</li> </ul> <p><strong>Scope of Delivery</strong></p> <ul> <li>1x Alphacool Eisstation VPP - Solo reservoir</li> <li>1x Metal bottom</li> <li>pump bracket</li> <li>Mounting screws</li> <li>4x Decoupling screws</li> <li>Self-adhesive velcro</li> </ul> <p> </p> <p><strong><span style="color: #3366ff;"><a href="http://www.alphacool.com/download/Eisstation_Datasheet_EN.pdf" target="_blank"><span style="color: #3366ff;">Datasheet</span></a></span></strong></p> <p><strong><span style="color: #3366ff;"><a href="http://www.alphacool.com/download/Eisstation_Anleitung.pdf" target="_blank"><span style="color: #3366ff;">Mounting manual</span></a></span></strong></p> <p><strong><span style="color: #3366ff;"><a href="http://www.alphacool.com/download/stp/EisstationVPP_Shrink.zip" target="_self"><span style="color: #3366ff;">Download 3D-file (.stp)</span></a></span></strong></p>

<p>Sleeved cables have become the norm for most modded computer builds and nothing is quite as good as when they’re hand made. The sleeved cables of most power supply manufacturers are usually loose, or you can see the original cable through the sleeve. This is not everyone's cup of tea. Many modders want a nice smooth and tight sleeve, preferably in a colour of their choice but to do this, you will need the correct tools. Alphacool now offers the Eistools Crimping Kit which has everything you need to create your own perfect cables.</p> <p>The crimping tools are safely stored in a foam insert inside a compact protective zipped case. This will ensure you can keep everything clean and tidy and makes it harder to lose anything.</p> <p>Several pin removers are included so that the cables can be easily removed from the individual connectors. These are compatible to remove all Molex terminals which can be found on a typical PC power supply. Therefore 3 different female extractors are included and a male extractor for the PCIe, ATX terminals and the 4 or 8 pin EPS connectors.</p> <p>Sharp side cutters have been included to allow you to cut wires to the desired length, whether you are shortening the original PSU cables or if you are creating your own, side cutters are always useful.</p> <p>To help you sleeve, particularly with paracord like our Alphacord range, the Alphacool Eisttols Crimping Kit comes with a special sleeving needle. The cable itself can be inserted at the rear end of the needle and then the sleeving needle is simply pushed through the sleeve together with the cable. This prevents the cable from sticking to the sleeve or even damaging it.</p> <p>If you have shortened or created your own cables, you will need to remove some insulation before crimping new terminals onto the wire. To do this you can use the automatic wire stripper that is included in the Eistools kit. With this stripper, you can determine contact pressure and the length of the insulation to be stripped and get the perfect result every time. This is basically child's play and can be done by anyone, even without prior knowledge.</p> <p>The crimping tool is required for the penultimate step. This is used to crimp the terminals you require onto the wire before you put them into the connector housing. You will need to purchase the terminals you need for your project separately as there are many different types. The Eistools set also includes alternative crimping jaws for terminals of different sizes. To change the crimping jaws, simply remove the two pins at the head of the crimping tool. Then you can simply insert the alternative crimping jaws and reattach them with the pins.</p> <p>The last step is the simplest one. The cables with the newly fitted terminals and sleeve only have to be plugged into the desired connector. The self-sleeved cable is ready. We recommend the Alphacool Alphacord as a sleeve. This is available in an incredible variety of colours and it is completely opaque.</p> <p><strong>Technical Data</strong></p> <ul> <li>Dimensions (BxLxH): 33 x 22 x 5cm</li> </ul> <p><strong>Scope of delivery</strong></p> <ul> <li>1x Alphacool Eistools crimping kit</li> </ul>

<p>If you have already cut PETG tubing, you may have run into the problem of unclean and uneven ends. This means you must further process the tubing making everything much more cumbersome. This is now a thing of the past! With the Eistools Modding Cutter, Alphacool launches a versatile product on the market with which you can cut your hard tubes cleanly without great effort. It is also very good for modders!<br><br><span style="text-decoration: underline;" data-mce-mark="1"><strong>No More Sawing PETG!</strong></span></p> <p>The well-known process remains the same: Heat up the Hardtube, cut it to the desired length, done! Alphacool does not reinvent the wheel here but improves the results many times over. Of course, the you can use the Eistools Modding Cutter with soft tubing too.<br><br><span style="text-decoration: underline;"><strong>What's with the angle?</strong></span></p> <p>The biggest feature of our new tool is probably the use of different angles on the pliers. These are used especially in other parts of the PC. If you have ever modded a PC, you will know how useful cutting a perfect angle can be. If you want to cut some U-channel at a 45-degree angle – no problem! If you have some light defusing material that needs to be flush – no problem!</p> <p> </p> <p>If your blade gets blunt over time, we've of course taken precautions as well. Replacement blades for your modding cutter can be found under article number 1015313.</p>

<p>Once you realise how versatile the Alphacool Eistool Modding Cutters can be, you will be using them for many applications and even the best tinkerers and modders can have an accident. Alphacool now offers replacement blades for your tools if yours are no longer as sharp as they once were.</p> <p>Replacing the blades is easy: Loosen the nut and bold, the old blade can be removed and a new one inserted. It doesn't get much more simple as that!</p>

Hochwertiges Entgratungs-Tool, für Hard-Tubes aus Kunststoff oder Metall, entgratet Innen- und Außenkanten

Vorgemischte Kühlflüssigkeit von Alphacool, 1.000 ml Inhalt, Blau, langlebige Farbstabilität, dauerhaft einsetzbar, geringe elektrische Leitfähigkeit, sehr guter thermischer Leitwert

<p style="text-align: justify;">With Alphacool Eiswasser, water cooling pioneer Alphacool is checking off every modder and enthusiast’s wish list: brilliant colours, cool effects in plexi coolers, tubing and reservoirs, as well as a long lifespan and material compatibility. The Alphacool Eiswasser Crystal Series has been tested in every possible application both in Alphacool’s lab and by external testers and modders, and was proven to be high-quality and long-lasting.<br /><br />If you’re looking to add some illumination to your PC, the Alphacool Eiswasser Crystal UV is for you. It has excellent UV-reactivity with UV-LEDs or cathodes.<br /><br />Alphacool Eiswasser gives your water cooling system an extra visual highlight with great cooling performance.<br /><br /><b>Note:</b> This cooling liquid does not contain any biocides or anti-corrosion additives. It should also be noted that the loop must be cleaned more frequently when using this colored liquid. The dyes it contains can clog the circuit after a long period of use and impair cooling performance. Alphacool's Eiswasser series is therefore more suitable for use in show cases than in gaming or work PCs.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data</b></td></tr><tr><td>UV ink</td><td>blue</td></tr><tr><td>Content</td><td>1000ml</td></tr><tr><td>Specification</td><td>Ready mix</td></tr><tr><td>Color</td><td>blue</td></tr><tr><td>Manufacturer</td><td>Alphacool</td></tr></table><br></p>

<p style="text-align: justify;">With Alphacool Eiswasser, water cooling pioneer Alphacool is checking off every modder and enthusiast’s wish list: brilliant colours, cool effects in plexi coolers, tubing and reservoirs, as well as a long lifespan and material compatibility. The Alphacool Eiswasser Crystal Series has been tested in every possible application both in Alphacool’s lab and by external testers and modders, and was proven to be high-quality and long-lasting.<br /><br />If you’re looking to add some illumination to your PC, the Alphacool Eiswasser Crystal UV is for you. It has excellent UV-reactivity with UV-LEDs or cathodes.<br /><br />Alphacool Eiswasser gives your water cooling system an extra visual highlight with great cooling performance.<br /><br /><b>Note:</b> This cooling liquid does not contain any biocides or anti-corrosion additives. It should also be noted that the loop must be cleaned more frequently when using this colored liquid. The dyes it contains can clog the circuit after a long period of use and impair cooling performance. Alphacool's Eiswasser series is therefore more suitable for use in show cases than in gaming or work PCs.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data</b></td></tr><tr><td>Color</td><td>transparent</td></tr><tr><td>UV ink</td><td>blue</td></tr><tr><td>Content</td><td>1000ml</td></tr><tr><td>Specification</td><td>Ready mix</td></tr><tr><td>Manufacturer</td><td>Alphacool</td></tr></table><br></p>

<p style="text-align: justify;">With Alphacool Eiswasser, water cooling pioneer Alphacool is checking off every modder and enthusiast’s wish list: brilliant colours, cool effects in plexi coolers, tubing and reservoirs, as well as a long lifespan and material compatibility. The Alphacool Eiswasser Crystal Series has been tested in every possible application both in Alphacool’s lab and by external testers and modders, and was proven to be high-quality and long-lasting.<br /><br />If you’re looking to add some illumination to your PC, the Alphacool Eiswasser Crystal UV is for you. It has excellent UV-reactivity with UV-LEDs or cathodes.<br /><br />Alphacool Eiswasser gives your water cooling system an extra visual highlight with great cooling performance.<br /><br /><b>Note:</b> This cooling liquid does not contain any biocides or anti-corrosion additives. It should also be noted that the loop must be cleaned more frequently when using this colored liquid. The dyes it contains can clog the circuit after a long period of use and impair cooling performance. Alphacool's Eiswasser series is therefore more suitable for use in show cases than in gaming or work PCs.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data</b></td></tr><tr><td>UV ink</td><td>Not UV active</td></tr><tr><td>Content</td><td>1000ml</td></tr><tr><td>Specification</td><td>Ready mix</td></tr><tr><td>Color</td><td>green</td></tr><tr><td>Manufacturer</td><td>Alphacool</td></tr></table><br></p>

Vorgemischte Kühlflüssigkeit von Alphacool, 1.000 ml Inhalt, Grün UV-aktiv, langlebige Farbstabilität, dauerhaft einsetzbar, geringe elektrische Leitfähigkeit, sehr guter thermischer Leitwert

<p style="text-align: justify;">With Alphacool Eiswasser, water cooling pioneer Alphacool is checking off every modder and enthusiast’s wish list: brilliant colours, cool effects in plexi coolers, tubing and reservoirs, as well as a long lifespan and material compatibility. The Alphacool Eiswasser Crystal Series has been tested in every possible application both in Alphacool’s lab and by external testers and modders, and was proven to be high-quality and long-lasting.<br /><br />If you’re looking to add some illumination to your PC, the Alphacool Eiswasser Crystal UV is for you. It has excellent UV-reactivity with UV-LEDs or cathodes.<br /><br />Alphacool Eiswasser gives your water cooling system an extra visual highlight with great cooling performance.<br /><br /><b>Note:</b> This cooling liquid does not contain any biocides or anti-corrosion additives. It should also be noted that the loop must be cleaned more frequently when using this colored liquid. The dyes it contains can clog the circuit after a long period of use and impair cooling performance. Alphacool's Eiswasser series is therefore more suitable for use in show cases than in gaming or work PCs.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data</b></td></tr><tr><td>UV ink</td><td>Not UV active</td></tr><tr><td>Content</td><td>1000ml</td></tr><tr><td>Specification</td><td>Ready mix</td></tr><tr><td>Color</td><td>red</td></tr><tr><td>Manufacturer</td><td>Alphacool</td></tr></table><br></p>

<p style="text-align: justify;">With Alphacool Eiswasser, water cooling pioneer Alphacool is checking off every modder and enthusiast’s wish list: brilliant colours, cool effects in plexi coolers, tubing and reservoirs, as well as a long lifespan and material compatibility. The Alphacool Eiswasser Crystal Series has been tested in every possible application both in Alphacool’s lab and by external testers and modders, and was proven to be high-quality and long-lasting.<br /><br />If you’re looking to add some illumination to your PC, the Alphacool Eiswasser Crystal UV is for you. It has excellent UV-reactivity with UV-LEDs or cathodes.<br /><br />Alphacool Eiswasser gives your water cooling system an extra visual highlight with great cooling performance.<br /><br /><b>Note:</b> This cooling liquid does not contain any biocides or anti-corrosion additives. It should also be noted that the loop must be cleaned more frequently when using this colored liquid. The dyes it contains can clog the circuit after a long period of use and impair cooling performance. Alphacool's Eiswasser series is therefore more suitable for use in show cases than in gaming or work PCs.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data</b></td></tr><tr><td>Content</td><td>1000ml</td></tr><tr><td>Specification</td><td>Ready mix</td></tr><tr><td>Color</td><td>yellow</td></tr><tr><td>UV ink</td><td>yellow</td></tr><tr><td>Manufacturer</td><td>Alphacool</td></tr></table><br></p>

<p>The Eiswind fans in the Pure Edition are based on the worldwide popular be quiet! fans. The finely ribbed fan blades ensure optimum air flow and targeted turbulence to minimize background noise. The high-quality rifle bearing also contributes to smooth running. The fans can be controlled via the 4-pin PWM connector. The fans can be controlled over a wide speed range.</p>

<p style="text-align: justify;">The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans.<br /><br /><b>Fullcover Waterblock?</b><br />The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler.<br /><br /><b>Chrome-plated copper</b><br />The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers.<br /><br /><b>Pump</b><br />The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal.<br /><br /><b>Fittings and Tubing</b><br />As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly.<br /><br /><b>Expandability</b><br />By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together.<br /><br /><b>Lighting and fans</b><br />The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm.<br /><br /><b>NexXxoS Radiator</b><br />As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success.<br /><br />The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop.<br /><br /><b>Technical note!</b><br />Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.<p> </p><b>Compatibility:</b><br>- AMD Radeon RX 7900 XTX, 24GB GDDR6<br>- ASRock Radeon RX 7900 XTX, 24GB GDDR6<br>- Asus Radeon RX 7900 XTX, RX7900XTX-24G, 24GB GDDR6 (90YV0IT0-U0NM00)<br>- Biostar Radeon RX 7900 XTX, 24GB GDDR6 (VA7906AEF4)<br>- Gigabyte Radeon RX 7900 XTX 24G, 24GB GDDR6 (GV-R79XTX-24GC-B)<br>- PowerColor Radeon RX 7900 XTX, 24GB GDDR6 (RX 7900 XTX 24G)<br>- XFX Radeon RX 7900 XTX, 24GB GDDR6 (RX-79XMBABF9)<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data radiator</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>395 x 124 x 30mm (+/- 3%)</td></tr><tr><td>Material cooling fins, chambers & channels</td><td>Copper</td></tr><tr><td>Material threads</td><td>Brass</td></tr><tr><td>Material outer housing</td><td>stainless steel</td></tr><tr><td>G 1/4“ threads</td><td>2 x for tubes (+ 1x Fillport G1/4“)</td></tr><tr><td>For fan size</td><td>120 mm</td></tr><tr><td>Options for fan assembly</td><td>3 x one-sided / 6 x both-sided</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data cooler and pump</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>268,58 x 144,80 x 47,70 mm</td></tr><tr><td>Material cooler bottom</td><td>Chrome plated copper</td></tr><tr><td>Material cooler top</td><td>acrylic</td></tr><tr><td>Threads</td><td>2 x G1/4“</td></tr><tr><td>Pump type</td><td>DC-LT 2</td></tr><tr><td>Pump speed</td><td>2600 rpm (+/- 10%)</td></tr><tr><td>Head of delivery</td><td>1 m</td></tr><tr><td>Maximum flow rate</td><td>72 L/h</td></tr><tr><td>Voltage</td><td>6-13.5V DC</td></tr><tr><td>Power consumption</td><td>3.2W</td></tr><tr><td>MTBF</td><td>50.000 h</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data liquid</b></td></tr><tr><td>Color</td><td>clear</td></tr><tr><td>Ingredient 1</td><td>Destilled water (CAS-number 7732-18-5)</td></tr><tr><td>Ingredient 2</td><td>Glysantin (CAS-number 1017-21-1)</td></tr><tr><td>Working temperatures</td><td>-15 C° / +90 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data quick fasteners</b></td></tr><tr><td>Dimensions (L x D)</td><td>95 x 27mm</td></tr><tr><td>Material</td><td>Nylon</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Color</td><td>Black</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fittings</b></td></tr><tr><td>L x D straight fitting</td><td>24 x 18mm</td></tr><tr><td>Quantity straight fittings</td><td>2x</td></tr><tr><td>L x B x H 90° fitting</td><td>35 x 27 x 17mm</td></tr><tr><td>Quantity 90° fittings</td><td>2x</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Material fittings</td><td>Brass</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data tube</b></td></tr><tr><td>Length</td><td>50cm</td></tr><tr><td>Material tube</td><td>TPV (EPDM/PP)</td></tr><tr><td>Color</td><td>Matt black</td></tr><tr><td>Tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Hardness grade</td><td>35 Shore-A to 50 Shore-D</td></tr><tr><td>Working temperature</td><td>-50 to +155 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fan</b></td></tr><tr><td>Speed</td><td>0 - 2500 RPM</td></tr><tr><td>Static pressure</td><td>3,17 mm H2O</td></tr><tr><td>Air flow rate</td><td>119,8 m³/h</td></tr><tr><td>Bearings</td><td>Sleeve bearing</td></tr><tr><td>Fan connector</td><td>4-Pin PWM</td></tr><tr><td>Connection Digital aRGB</td><td>3-Pin JST + 3-Pin 5V</td></tr><tr><td>Dimensions (L x W x H)</td><td>120 x 120 x 25mm</td></tr><tr><td>Net weight</td><td>187g</td></tr><tr><td>Max working temperature</td><td>60°C</td></tr></table><br></p>

<p style="text-align: justify;">The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans.<br /><br /><b>Fullcover Waterblock?</b><br />The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler.<br /><br /><b>Pump</b><br />The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal.<br /><br /><b>Fittings and Tubing</b><br />As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly.<br /><br /><b>Expandability</b><br />By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together.<br /><br /><b>Lighting and fans</b><br />The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The Lux Pro fans, as known from the Eisbaer Aurora series, are also used for the Eiswolf 2. They also have an extraordinary lighting with Digital RGB LEDs. <br /><br /><b>NexXxoS Radiator</b><br />As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success.<br /><br />The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop.<br /><br />A suitable backplate can be found under the following article number: 12959<br /><br /><b>Technical note!</b><br />Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.<p> </p><b>Compatibility:</b><br>Gigabyte GeForce RTX 2060 Gaming OC 6G, 6GB GDDR6, HDMI, 3x DP<br>Gigabyte GeForce RTX 2060 SUPER Gaming OC 8G, 8GB GDDR6, HDMI, 3x DP<br>ASUS Turbo GeForce RTX 2070, TURBO-RTX2070-8G, 8GB GDDR6<br>EVGA GeForce RTX 2070 XC Black Edition Gaming, 8GB GDDR6<br>EVGA GeForce RTX 2070 XC Ultra Gaming, 8GB GDDR6<br>KFA2 GeForce RTX 2070 OC, 8GB GDDR6, HDMI, 3x DP, USB-C<br>MSI GeForce RTX 2070 Aero 8G, 8GB GDDR6<br>Palit GeForce RTX 2070 GamingPro OC V1, 8GB GDDR6<br>Palit GeForce RTX 2070 GamingPro OC, 8GB GDDR6<br>Palit GeForce RTX 2070 Dual, 8GB GDDR6<br>ASUS Turbo GeForce RTX 2070 SUPER Evo, TURBO-RTX2070S-8G-EVO, 8GB GDDR6<br>EVGA GeForce RTX 2070 SUPER Black Gaming, 8GB GDDR6, HDMI, 3x DP<br>Gigabyte GeForce RTX 2070 Gaming OC 8G, 8GB GDDR6<br>Gigabyte GeForce RTX 2070 Super Gaming OC 8G, 8GB GDDR6<br>Gigabyte GeForce RTX 2070 SUPER Windforce OC 8G, 8GB GDDR6, HDMI<br>EVGA GeForce RTX 2070 SUPER Black Gaming, 8GB GDDR6, HDMI, 3x DP<br>Palit GeForce RTX 2070 SUPER X, 8GB GDDR6, HDMI, 3x DP<br>Zotac Gaming GeForce RTX 2070 SUPER Twin Fan, 8GB GDDR6, HDMI, 3x DP<br>ASUS Turbo GeForce RTX 2080, TURBO-RTX2080-8G, 8GB GDDR6<br>EVGA GeForce RTX 2080 XC Gaming, 8GB GDDR6<br>EVGA GeForce RTX 2080 XC Ultra Gaming, 8GB GDDR6<br>Gigabyte GeForce RTX 2080 Gaming OC 8G, 8GB GDDR6<br>Gigabyte GeForce RTX 2080 Turbo 8G, 8GB GDDR6<br>Gigabyte GeForce RTX 2080 Turbo OC 8G, 8GB GDDR6<br>Gigabyte GeForce RTX 2080 Windforce OC 8G, 8GB GDDR6<br>INNO3D GeForce RTX 2080 Gaming OC, 8GB GDDR6<br>INNO3D GeForce RTX 2080 Jet, 8GB GDDR6<br>KFA2 GeForce RTX 2080 OC, 8GB GDDR6, HDMI, 3x DP, USB-C<br>Manli GeForce RTX 2080 Gallardo, 8GB GDDR6, HDMI, 3x DP, USB-C<br>MSI GeForce RTX 2080 Aero 8G, 8GB GDDR6, HDMI, 3x DP, USB-C<br>MSI GeForce RTX 2080 Duke 8G OC, 8GB GDDR6, HDMI, 3x DP, USB-C<br>MSI GeForce RTX 2080 Sea Hawk X, 8GB GDDR6<br>MSI GeForce RTX 2080 Ventus 8G OC, 8GB GDDR6, HDMI, 3x DP, USB-C<br>MSI GeForce RTX 2080 Ventus 8G, 8GB GDDR6, HDMI, 3x DP, USB-C<br>Nvidia Geforce RTX 2080 Founders Edition<br>Palit GeForce RTX 2080 GamingPro OC, 8GB GDDR6<br>Palit GeForce RTX 2080 GamingPro, 8GB GDDR6<br>PNY GeForce RTX 2080 XLR8 Gaming OC Triple Fan, 8GB GDDR6<br>PNY GeForce RTX 2080 XLR8 Gaming OC Twin Fan, 8GB GDDR6<br>Zotac GAMING GeForce RTX 2080 AMP! Edition, 8192 MB GDDR6<br>ASUS Dual GeForce RTX 2080 Ti Advanced, DUAL-RTX2080TI-A11G<br>ASUS Dual GeForce RTX 2080 Ti OC, 11GB GDDR6<br>ASUS Turbo GeForce RTX 2080 Ti, TURBO-RTX2080TI-11G, 11GB GDDR6<br>EVGA GeForce RTX 2080 Ti 11GB<br>EVGA GeForce RTX 2080 Ti 11GB BLACK<br>EVGA GeForce RTX 2080 Ti Gaming, 11GB GDDR6, HDMI, 2x DP, USB-C<br>EVGA GeForce RTX 2080 Ti XC<br>EVGA GeForce RTX 2080 Ti XC ULTRA GAMING<br>EVGA GeForce RTX 2080 Ti XC2 Ultra Gaming, 11GB GDDR6<br>Gainward GeForce RTX 2080 Ti Phoenix GS, 11GB GDDR6<br>Gainward GeForce RTX 2080 Ti Phoenix, 11GB GDDR6<br>GIGABYTE GeForce RTX 2080 Ti GAMING OC 11G<br>Gigabyte GeForce RTX 2080 Ti Turbo OC 11G, 11GB GDDR6<br>Gigabyte GeForce RTX 2080 Ti Windforce 11G, 11GB GDDR6<br>GIGABYTE GeForce RTX 2080 Ti WINDFORCE OC 11G<br>Inno3D GeForce RTX 2080 Ti Gaming OC X3, 11GB GDDR6<br>Inno3D GeForce RTX 2080 Ti Gaming OC, 11GB GDDR6<br>Inno3D GeForce RTX 2080 Ti Twin X2, 11GB GDDR6<br>KFA2 GeForce RTX 2080 Ti Dual Black [1-Click OC], 11GB GDDR6, HDMI, 3x DP<br>KFA² GeForce RTX 2080 Ti OC, 11GB GDDR6<br>MSI GeForce RTX 2080 Ti Duke 11G OC, 11GB GDDR6<br>MSI GeForce RTX 2080 Ti Duke 11G, 11GB GDDR6<br>MSI GeForce RTX 2080 Ti Sea Hawk X, 11GB GDDR6<br>MSI GeForce RTX 2080 Ti Ventus 11G, 11GB GDDR6<br>Nvidia Geforce RTX 2080Ti Founders Edition<br>Palit GeForce RTX 2080 Ti Dual, 11GB GDDR6<br>Palit GeForce RTX 2080 Ti GamingPro OC, 11GB GDDR6<br>Palit GeForce RTX 2080 Ti GamingPro, 11GB GDDR6<br>PNY GeForce RTX 2080 Ti XLR8 Gaming Overclocked, 11GB GDDR6<br>Zotac GAMING GeForce RTX 2080 Ti Triple Fan<br>Zotac Gaming GeForce RTX 2080 Ti Blower, 11GB GDDR6<br>EVGA GeForce RTX 2080 SUPER Black Gaming, 8GB GDDR6, HDMI, 3x DP<br>MSI GeForce RTX 2080 SUPER Ventus, 8GB GDDR6, HDMI, 3x DP<br>PNY GeForce RTX 2080 SUPER Blower, 8GB GDDR6, HDMI, 3x DP<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data radiator</b></td></tr><tr><td>L x W x H</td><td>278 x 124 x 30mm (+/- 3%)</td></tr><tr><td>Material cooling fins, chambers & channels</td><td>Copper</td></tr><tr><td>Material threads</td><td>Brass</td></tr><tr><td>Material outer housing</td><td>stainless steel</td></tr><tr><td>G 1/4“ threads</td><td>2 x for tubes (+ 1x Fillport G1/4“)</td></tr><tr><td>For fan size</td><td>120 mm</td></tr><tr><td>Possible fan assembly</td><td>2 x one-sided / 4 x both-sided</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data cooler and pump</b></td></tr><tr><td>L x W x H</td><td>263,7 x 130,9 x 46,2mm</td></tr><tr><td>Material cooler bottom</td><td>Nickel plated copper</td></tr><tr><td>Material cooler top</td><td>PMMA</td></tr><tr><td>Threads</td><td>2 x G1/4“</td></tr><tr><td>Pump type</td><td>DC-LT 2</td></tr><tr><td>Pump speed</td><td>2600 rpm (+/- 10%)</td></tr><tr><td>Head of delivery</td><td>1 m</td></tr><tr><td>Maximum flow rate</td><td>72 L/h</td></tr><tr><td>Voltage</td><td>6-13.5V DC</td></tr><tr><td>Power consumption</td><td>3.2W</td></tr><tr><td>MTBF</td><td>50.000 h</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data liquid</b></td></tr><tr><td>Color</td><td>clear</td></tr><tr><td>Ingredient 1</td><td>Destilled water (CAS-number 7732-18-5)</td></tr><tr><td>Ingredient 2</td><td>Glysantin (CAS-number 1017-21-1)</td></tr><tr><td>Working temperatures</td><td>-15 C° / +90 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data quick fasteners</b></td></tr><tr><td>L x D</td><td>95 x 27mm</td></tr><tr><td>Material</td><td>Nylon</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Color</td><td>Black</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fittings</b></td></tr><tr><td>L x D straight fitting</td><td>28 x 20mm</td></tr><tr><td>Quantity straight fittings</td><td>2x</td></tr><tr><td>L x B x H 90° fitting</td><td>35 x 27 x 17mm</td></tr><tr><td>Quantity 90° fittings</td><td>2x</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Material fittings</td><td>Brass</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data tube</b></td></tr><tr><td>Length</td><td>40cm</td></tr><tr><td>Material tube</td><td>TPV (EPDM/PP)</td></tr><tr><td>Color</td><td>Matt black</td></tr><tr><td>Tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Hardness grade</td><td>35 Shore-A to 50 Shore-D</td></tr><tr><td>Working temperature</td><td>-50 to +155 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fan</b></td></tr><tr><td>Speed</td><td>800 - 2000 RPM</td></tr><tr><td>Static pressure</td><td>2,0 mm H2O</td></tr><tr><td>Air flow rate</td><td>104,49 m³/h</td></tr><tr><td>Bearings</td><td>Hydraulic bearing</td></tr><tr><td>Fan connector</td><td>4-Pin PWM</td></tr><tr><td>Connection Digital aRGB</td><td>3-Pin JST + 3-Pin 5V</td></tr><tr><td>Dimensions</td><td>120 x 120 x 25mm</td></tr></table><br></p>

<p style="text-align: justify;">The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans.<br /><br /><b>Fullcover Waterblock?</b><br />The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler.<br /><br /><b>Chrome-plated copper</b><br />The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers.<br /><br /><b>Pump</b><br />The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal.<br /><br /><b>Fittings and Tubing</b><br />As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly.<br /><br /><b>Expandability</b><br />By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together.<br /><br /><b>Lighting and fans</b><br />The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm.<br /><br /><b>NexXxoS Radiator</b><br />As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success.<br /><br />The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop.<br /><br /><b>Technical note!</b><br />Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.<p> </p><b>Compatibility:</b><br>- Asus ROG Strix GeForce RTX 4080 OC, ROG-STRIX-RTX4080-O16G-GAMING, 16GB GDDR6X (90YV0IC0-M0NA00)<br>- Asus ROG Strix GeForce RTX 4080, ROG-STRIX-RTX4080-16G-GAMING, 16GB GDDR6X (90YV0IC1-M0NA00)<br>- Asus TUF Gaming GeForce RTX 4080 OC, TUF-RTX4080-O16G-GAMING, 16GB GDDR6X (90YV0IB0-M0NA00)<br>- Asus TUF Gaming GeForce RTX 4080, TUF-RTX4080-16G-GAMING, 16GB GDDR6X (90YV0IB1-M0NA00)<br>- Asus ROG Strix GeForce RTX 4080 SUPER 16GB GDDR6X<br>- Asus ROG Strix GeForce RTX 4080 SUPER 16GB GDDR6X OC Edition<br>- Asus ROG Strix GeForce RTX 4080 SUPER 16GB GDDR6X White Edition<br>- Asus ROG Strix GeForce RTX 4080 SUPER 16GB GDDR6X White OC Edition<br>- Asus TUF Gaming GeForce RTX 4080 SUPER 16GB GDDR6X<br>- Asus TUF Gaming GeForce RTX 4080 SUPER 16GB GDDR6X OC Edition<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data radiator</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>395 x 124 x 30mm (+/- 3%)</td></tr><tr><td>Material cooling fins, chambers & channels</td><td>Copper</td></tr><tr><td>Material threads</td><td>Brass</td></tr><tr><td>Material outer housing</td><td>stainless steel</td></tr><tr><td>G 1/4“ threads</td><td>2 x for tubes (+ 1x Fillport G1/4“)</td></tr><tr><td>For fan size</td><td>120 mm</td></tr><tr><td>Options for fan assembly</td><td>3 x one-sided / 6 x both-sided</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data cooler and pump</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>220,90 x 166,60 x 47,60 mm</td></tr><tr><td>Material cooler bottom</td><td>Chrome plated copper</td></tr><tr><td>Material cooler top</td><td>acrylic</td></tr><tr><td>Threads</td><td>2 x G1/4“</td></tr><tr><td>Pump type</td><td>DC-LT 2</td></tr><tr><td>Pump speed</td><td>2600 rpm (+/- 10%)</td></tr><tr><td>Head of delivery</td><td>1 m</td></tr><tr><td>Maximum flow rate</td><td>72 L/h</td></tr><tr><td>Voltage</td><td>6-13.5V DC</td></tr><tr><td>Power consumption</td><td>3.2W</td></tr><tr><td>MTBF</td><td>50.000 h</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data liquid</b></td></tr><tr><td>Color</td><td>clear</td></tr><tr><td>Ingredient 1</td><td>Destilled water (CAS-number 7732-18-5)</td></tr><tr><td>Ingredient 2</td><td>Glysantin (CAS-number 1017-21-1)</td></tr><tr><td>Working temperatures</td><td>-15 C° / +90 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data quick fasteners</b></td></tr><tr><td>Dimensions (L x D)</td><td>95 x 27mm</td></tr><tr><td>Material</td><td>Nylon</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Color</td><td>Black</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fittings</b></td></tr><tr><td>L x D straight fitting</td><td>24 x 18mm</td></tr><tr><td>Quantity straight fittings</td><td>2x</td></tr><tr><td>L x B x H 90° fitting</td><td>35 x 27 x 17mm</td></tr><tr><td>Quantity 90° fittings</td><td>2x</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Material fittings</td><td>Brass</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data tube</b></td></tr><tr><td>Length</td><td>50cm</td></tr><tr><td>Material tube</td><td>TPV (EPDM/PP)</td></tr><tr><td>Color</td><td>Matt black</td></tr><tr><td>Tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Hardness grade</td><td>35 Shore-A to 50 Shore-D</td></tr><tr><td>Working temperature</td><td>-50 to +155 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fan</b></td></tr><tr><td>Speed</td><td>0 - 2500 RPM</td></tr><tr><td>Static pressure</td><td>3,17 mm H2O</td></tr><tr><td>Air flow rate</td><td>119,8 m³/h</td></tr><tr><td>Bearings</td><td>Sleeve bearing</td></tr><tr><td>Fan connector</td><td>4-Pin PWM</td></tr><tr><td>Connection Digital aRGB</td><td>3-Pin JST + 3-Pin 5V</td></tr><tr><td>Dimensions (L x W x H)</td><td>120 x 120 x 25mm</td></tr><tr><td>Net weight</td><td>187g</td></tr><tr><td>Max working temperature</td><td>60°C</td></tr></table><br></p>

<p style="text-align: justify;">The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans.<br /><br /><b>Fullcover Waterblock?</b><br />The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler.<br /><br /><b>Chrome-plated copper</b><br />The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers.<br /><br /><b>Pump</b><br />The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal.<br /><br /><b>Fittings and Tubing</b><br />As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly.<br /><br /><b>Expandability</b><br />By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together.<br /><br /><b>Lighting and fans</b><br />The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm.<br /><br /><b>NexXxoS Radiator</b><br />As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success.<br /><br />The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop.<br /><br /><b>Technical note!</b><br />Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.<p> </p><b>Compatibility:</b><br>- MSI GeForce RTX 4080 16GB Suprim X, 16GB GDDR6X (V511-004R)<br>- MSI GeForce RTX 4080 Gaming X Trio 16GB, 16GB GDDR6X (V511-005R)<br>- MSI GeForce RTX 4080 SUPER 16G SUPRIM<br>- MSI GeForce RTX 4080 SUPER 16G SUPRIM X (V511-248R)<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data radiator</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>395 x 124 x 30mm (+/- 3%)</td></tr><tr><td>Material cooling fins, chambers & channels</td><td>Copper</td></tr><tr><td>Material threads</td><td>Brass</td></tr><tr><td>Material outer housing</td><td>stainless steel</td></tr><tr><td>G 1/4“ threads</td><td>2 x for tubes (+ 1x Fillport G1/4“)</td></tr><tr><td>For fan size</td><td>120 mm</td></tr><tr><td>Options for fan assembly</td><td>3 x one-sided / 6 x both-sided</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data cooler and pump</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>266,66 x 172,03 x 47,13 mm</td></tr><tr><td>Material cooler bottom</td><td>Chrome plated copper</td></tr><tr><td>Material cooler top</td><td>acrylic</td></tr><tr><td>Threads</td><td>2 x G1/4“</td></tr><tr><td>Pump type</td><td>DC-LT 2</td></tr><tr><td>Pump speed</td><td>2600 rpm (+/- 10%)</td></tr><tr><td>Head of delivery</td><td>1 m</td></tr><tr><td>Maximum flow rate</td><td>72 L/h</td></tr><tr><td>Voltage</td><td>6-13.5V DC</td></tr><tr><td>Power consumption</td><td>3.2W</td></tr><tr><td>MTBF</td><td>50.000 h</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data liquid</b></td></tr><tr><td>Color</td><td>clear</td></tr><tr><td>Ingredient 1</td><td>Destilled water (CAS-number 7732-18-5)</td></tr><tr><td>Ingredient 2</td><td>Glysantin (CAS-number 1017-21-1)</td></tr><tr><td>Working temperatures</td><td>-15 C° / +90 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data quick fasteners</b></td></tr><tr><td>Dimensions (L x D)</td><td>95 x 27mm</td></tr><tr><td>Material</td><td>Nylon</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Color</td><td>Black</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fittings</b></td></tr><tr><td>L x D straight fitting</td><td>24 x 18mm</td></tr><tr><td>Quantity straight fittings</td><td>2x</td></tr><tr><td>L x B x H 90° fitting</td><td>35 x 27 x 17mm</td></tr><tr><td>Quantity 90° fittings</td><td>2x</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Material fittings</td><td>Brass</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data tube</b></td></tr><tr><td>Length</td><td>50cm</td></tr><tr><td>Material tube</td><td>TPV (EPDM/PP)</td></tr><tr><td>Color</td><td>Matt black</td></tr><tr><td>Tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Hardness grade</td><td>35 Shore-A to 50 Shore-D</td></tr><tr><td>Working temperature</td><td>-50 to +155 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fan</b></td></tr><tr><td>Speed</td><td>0 - 2500 RPM</td></tr><tr><td>Static pressure</td><td>3,17 mm H2O</td></tr><tr><td>Air flow rate</td><td>119,8 m³/h</td></tr><tr><td>Bearings</td><td>Sleeve bearing</td></tr><tr><td>Fan connector</td><td>4-Pin PWM</td></tr><tr><td>Connection Digital aRGB</td><td>3-Pin JST + 3-Pin 5V</td></tr><tr><td>Dimensions (L x W x H)</td><td>120 x 120 x 25mm</td></tr><tr><td>Net weight</td><td>187g</td></tr><tr><td>Max working temperature</td><td>60°C</td></tr></table><br></p>

<p style="text-align: justify;">The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans.<br /><br /><b>Fullcover Waterblock?</b><br />The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler.<br /><br /><b>Chrome-plated copper</b><br />The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers.<br /><br /><b>Pump</b><br />The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal.<br /><br /><b>Fittings and Tubing</b><br />As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly.<br /><br /><b>Expandability</b><br />By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together.<br /><br /><b>Lighting and fans</b><br />The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm.<br /><br /><b>NexXxoS Radiator</b><br />As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success.<br /><br />The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop.<br /><br /><b>Technical note!</b><br />Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.<p> </p><b>Compatibility:</b><br>- Asus ROG Matrix GeForce RTX 4090 Platinum, ROG-MATRIX-RTX4090-P24G-GAMING, 24GB GDDR6X (90YV0ID7-M0NM00)<br>- Asus ROG Strix GeForce RTX 4090 OC, ROG-STRIX-RTX4090-O24G-GAMING, 24GB GDDR6X (90YV0ID0-M0NA00)<br>- Asus ROG Strix GeForce RTX 4090, ROG-STRIX-RTX4090-24G-GAMING, 24GB GDDR6X (90YV0ID1-M0NA00)<br>- Asus TUF Gaming GeForce RTX 4090 OC, TUF-RTX4090-O24G-Gaming, 24GB GDDR6X (90YV0IE0-M0NA00)<br>- Asus TUF Gaming GeForce RTX 4090, TUF-RTX4090-24G-GAMING, 24GB GDDR6X (90YV0IE1-M0NA00)<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data radiator</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>395 x 124 x 30mm (+/- 3%)</td></tr><tr><td>Material cooling fins, chambers & channels</td><td>Copper</td></tr><tr><td>Material threads</td><td>Brass</td></tr><tr><td>Material outer housing</td><td>stainless steel</td></tr><tr><td>G 1/4“ threads</td><td>2 x for tubes (+ 1x Fillport G1/4“)</td></tr><tr><td>For fan size</td><td>120 mm</td></tr><tr><td>Options for fan assembly</td><td>3 x one-sided / 6 x both-sided</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data cooler and pump</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>220,90 x 166,60 x 46,10 mm</td></tr><tr><td>Material cooler bottom</td><td>Chrome plated copper</td></tr><tr><td>Material cooler top</td><td>acrylic</td></tr><tr><td>Threads</td><td>2 x G1/4“</td></tr><tr><td>Pump type</td><td>DC-LT 2</td></tr><tr><td>Pump speed</td><td>2600 rpm (+/- 10%)</td></tr><tr><td>Head of delivery</td><td>1 m</td></tr><tr><td>Maximum flow rate</td><td>72 L/h</td></tr><tr><td>Voltage</td><td>6-13.5V DC</td></tr><tr><td>Power consumption</td><td>3.2W</td></tr><tr><td>MTBF</td><td>50.000 h</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data liquid</b></td></tr><tr><td>Color</td><td>clear</td></tr><tr><td>Ingredient 1</td><td>Destilled water (CAS-number 7732-18-5)</td></tr><tr><td>Ingredient 2</td><td>Glysantin (CAS-number 1017-21-1)</td></tr><tr><td>Working temperatures</td><td>-15 C° / +90 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data quick fasteners</b></td></tr><tr><td>Dimensions (L x D)</td><td>95 x 27mm</td></tr><tr><td>Material</td><td>Nylon</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Color</td><td>Black</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fittings</b></td></tr><tr><td>L x D straight fitting</td><td>24 x 18mm</td></tr><tr><td>Quantity straight fittings</td><td>2x</td></tr><tr><td>L x B x H 90° fitting</td><td>35 x 27 x 17mm</td></tr><tr><td>Quantity 90° fittings</td><td>2x</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Material fittings</td><td>Brass</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data tube</b></td></tr><tr><td>Length</td><td>50cm</td></tr><tr><td>Material tube</td><td>TPV (EPDM/PP)</td></tr><tr><td>Color</td><td>Matt black</td></tr><tr><td>Tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Hardness grade</td><td>35 Shore-A to 50 Shore-D</td></tr><tr><td>Working temperature</td><td>-50 to +155 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fan</b></td></tr><tr><td>Speed</td><td>0 - 2500 RPM</td></tr><tr><td>Static pressure</td><td>3,17 mm H2O</td></tr><tr><td>Air flow rate</td><td>119,8 m³/h</td></tr><tr><td>Bearings</td><td>Sleeve bearing</td></tr><tr><td>Fan connector</td><td>4-Pin PWM</td></tr><tr><td>Connection Digital aRGB</td><td>3-Pin JST + 3-Pin 5V</td></tr><tr><td>Dimensions (L x W x H)</td><td>120 x 120 x 25mm</td></tr><tr><td>Net weight</td><td>187g</td></tr><tr><td>Max working temperature</td><td>60°C</td></tr></table><br></p>

<p style="text-align: justify;">The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans.<br /><br /><b>Fullcover Waterblock?</b><br />The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler.<br /><br /><b>Pump</b><br />The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal.<br /><br /><b>Fittings and Tubing</b><br />As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly.<br /><br /><b>Expandability</b><br />By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together.<br /><br /><b>Lighting and fans</b><br />The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm.<br /><br /><b>NexXxoS Radiator</b><br />As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success.<br /><br />The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop.<br /><br /><b>Technical note!</b><br />Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.<p> </p><b>Compatibility:</b><br>- MSI Radeon RX 6800 Gaming X Trio 16G, 16GB GDDR6<br>- MSI Radeon RX 6800 XT Gaming X Trio 16G, 16GB GDDR6<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Data radiator</b></td></tr><tr><td>L x W x H</td><td>395 x 124 x 30mm (+/- 3%)</td></tr><tr><td>Material cooling fins</td><td>Copper</td></tr><tr><td>Material chambers</td><td>Copper</td></tr><tr><td>Material cooling channels</td><td>Copper</td></tr><tr><td>Material threads</td><td>Brass</td></tr><tr><td>Material outer housing</td><td>stainless steel</td></tr><tr><td>G 1/4“ threads</td><td>2 x for tubes (+ 1x Fillport G1/4“)</td></tr><tr><td>For fan size</td><td>120 mm</td></tr><tr><td>Possible fan assembly</td><td>3 x one-sided / 6 x both-sided</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Data cooler and pump</b></td></tr><tr><td>L x W x H</td><td>295 x 152 x 46 mm</td></tr><tr><td>Material cooler bottom</td><td>Chromel plated copper</td></tr><tr><td>Material cooler top</td><td>PMMA</td></tr><tr><td>Threads</td><td>2 x G1/4“</td></tr><tr><td>Pump type</td><td>DC-LT 2</td></tr><tr><td>Pump speed</td><td>2600 rpm (+/- 10%)</td></tr><tr><td>Head of delivery</td><td>1 m</td></tr><tr><td>Maximum flow rate</td><td>72 L/h</td></tr><tr><td>Voltage</td><td>6-13.5V DC</td></tr><tr><td>Power consumption</td><td>3.2W</td></tr><tr><td>MTBF</td><td>50.000 h</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Data liquid</b></td></tr><tr><td>Color</td><td>clear</td></tr><tr><td>Ingredient 1</td><td>Destilled water (CAS-number 7732-18-5)</td></tr><tr><td>Ingredient 2</td><td>Glysantin (CAS-number 1017-21-1)</td></tr><tr><td>Working temperatures</td><td>-15 C° / +90 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Data quick fasteners</b></td></tr><tr><td>L x D</td><td>95 x 27 mm</td></tr><tr><td>Material</td><td>Nylon</td></tr><tr><td>For tube size</td><td>12,7 / 7,6 mm</td></tr><tr><td>Color</td><td>Black</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Data fittings</b></td></tr><tr><td>L x D straight fitting</td><td>24 x 18 mm</td></tr><tr><td>Quantity straight fittings</td><td>2x</td></tr><tr><td>L x B x H 90° fitting</td><td>35 x 27 x 17 mm</td></tr><tr><td>Quantity 90° fittings</td><td>2x</td></tr><tr><td>For tube size</td><td>12,7 / 7,6 mm</td></tr><tr><td>Material fittings</td><td>Brass</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Data tube</b></td></tr><tr><td>Length</td><td>50 cm</td></tr><tr><td>Material tube</td><td>TPV (EPDM/PP)</td></tr><tr><td>Color</td><td>Matt black</td></tr><tr><td>Tube size</td><td>12,7 / 7,6 mm</td></tr><tr><td>Hardness grade</td><td>35 Shore-A to 50 Shore-D</td></tr><tr><td>Working temperature</td><td>-50 to +155 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Data fan</b></td></tr><tr><td>Speed</td><td>0 - 2500 RPM</td></tr><tr><td>Static pressure</td><td>3,17 mm H2O</td></tr><tr><td>Air flow rate</td><td>119,8 m³/h</td></tr><tr><td>Bearings</td><td>Sleeve bearing</td></tr><tr><td>Fan connector</td><td>4-Pin PWM</td></tr><tr><td>Connection Digital aRGB</td><td>3-Pin JST + 3-Pin 5V</td></tr><tr><td>Dimensions</td><td>120 x 120 x 25 mm</td></tr><tr><td>Net weight</td><td>187 g</td></tr><tr><td>Max working temperature</td><td>60 °C</td></tr></table><br></p>

All-In-One Full-Cover-Wasserkühlung von Alphacool, für Radeon RX 6800/6800XT/6900 ASUS ROG Strix/TUF, mit 360-mm-Vollkupfer-Radiator, drei 120-mm-RGB-Lüfter, vernickelter Kühlerboden + Acryldeckel, eingebaute DC-LT-2-Pumpe, digital adressierbare RGB-LED-Beleuchtung, erweiterbar durch Schnellverschlüsse

<p style="text-align: justify;">The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans.<br /><br /><b>Fullcover Waterblock?</b><br />The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler.<br /><br /><b>Pump</b><br />The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal.<br /><br /><b>Fittings and Tubing</b><br />As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly.<br /><br /><b>Expandability</b><br />By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together.<br /><br /><b>Lighting and fans</b><br />The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm.<br /><br /><b>NexXxoS Radiator</b><br />As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success.<br /><br />The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop.<br /><br /><b>Technical note!</b><br />Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.<p> </p><b>Compatibility:</b><br>- Nvidia 3080 Founders Edition<br>- Nvidia GeForce RTX 3080 Ti Founders Edition<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Data radiator</b></td></tr><tr><td>L x W x H</td><td>395 x 124 x 30mm (+/- 3%)</td></tr><tr><td>Material cooling fins</td><td>Copper</td></tr><tr><td>Material chambers</td><td>Copper</td></tr><tr><td>Material cooling channels</td><td>Copper</td></tr><tr><td>Material threads</td><td>Brass</td></tr><tr><td>Material outer housing</td><td>stainless steel</td></tr><tr><td>G 1/4“ threads</td><td>2 x for tubes (+ 1x Fillport G1/4“)</td></tr><tr><td>For fan size</td><td>120 mm</td></tr><tr><td>Possible fan assembly</td><td>3 x one-sided / 6 x both-sided</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Data cooler and pump</b></td></tr><tr><td>L x W x H</td><td>204,5 x 121,5 x 46 mm</td></tr><tr><td>Material cooler bottom</td><td>Chrome plated copper</td></tr><tr><td>Material cooler top</td><td>PMMA</td></tr><tr><td>Threads</td><td>2 x G1/4“</td></tr><tr><td>Pump type</td><td>DC-LT 2</td></tr><tr><td>Pump speed</td><td>2600 rpm (+/- 10%)</td></tr><tr><td>Head of delivery</td><td>1 m</td></tr><tr><td>Maximum flow rate</td><td>72 L/h</td></tr><tr><td>Voltage</td><td>6-13.5V DC</td></tr><tr><td>Power consumption</td><td>3.2W</td></tr><tr><td>MTBF</td><td>50.000 h</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Data liquid</b></td></tr><tr><td>Color</td><td>clear</td></tr><tr><td>Ingredient 1</td><td>Destilled water (CAS-number 7732-18-5)</td></tr><tr><td>Ingredient 2</td><td>Glysantin (CAS-number 1017-21-1)</td></tr><tr><td>Working temperatures</td><td>-15 C° / +90 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Data quick fasteners</b></td></tr><tr><td>L x D</td><td>95 x 27 mm</td></tr><tr><td>Material</td><td>Nylon</td></tr><tr><td>For tube size</td><td>12,7 / 7,6 mm</td></tr><tr><td>Color</td><td>Black</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Data fittings</b></td></tr><tr><td>L x D straight fitting</td><td>24 x 18 mm</td></tr><tr><td>Quantity straight fittings</td><td>2x</td></tr><tr><td>L x B x H 90° fitting</td><td>35 x 27 x 17 mm</td></tr><tr><td>Quantity 90° fittings</td><td>2x</td></tr><tr><td>For tube size</td><td>12,7 / 7,6 mm</td></tr><tr><td>Material fittings</td><td>Brass</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Data tube</b></td></tr><tr><td>Length</td><td>50 cm</td></tr><tr><td>Material tube</td><td>TPV (EPDM/PP)</td></tr><tr><td>Color</td><td>Matt black</td></tr><tr><td>Tube size</td><td>12,7 / 7,6 mm</td></tr><tr><td>Hardness grade</td><td>35 Shore-A to 50 Shore-D</td></tr><tr><td>Working temperature</td><td>-50 to +155 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Data fan</b></td></tr><tr><td>Speed</td><td>0 - 2500 RPM</td></tr><tr><td>Static pressure</td><td>3,17 mm H2O</td></tr><tr><td>Air flow rate</td><td>119,8 m³/h</td></tr><tr><td>Bearings</td><td>Sleeve bearing</td></tr><tr><td>Fan connector</td><td>4-Pin PWM</td></tr><tr><td>Connection Digital aRGB</td><td>3-Pin JST + 3-Pin 5V</td></tr><tr><td>Dimensions</td><td>120 x 120 x 25 mm</td></tr><tr><td>Net weight</td><td>187 g</td></tr><tr><td>Max working temperature</td><td>60 °C</td></tr></table><br></p>

<p style="text-align: justify;">The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans.<br /><br /><b>Fullcover Waterblock?</b><br />The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler.<br /><br /><b>Pump</b><br />The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal.<br /><br /><b>Fittings and Tubing</b><br />As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly.<br /><br /><b>Expandability</b><br />By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together.<br /><br /><b>Lighting and fans</b><br />The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm.<br /><br /><b>NexXxoS Radiator</b><br />As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success.<br /><br />The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop.<br /><br /><b>Technical note!</b><br />Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.<p> </p><b>Compatibility:</b><br>- Gigabyte Aorus GeForce RTX 3080 Master 10G, 10GB GDDR6X (GV-N3080AORUS M-10GD)<br>- Gigabyte Aorus GeForce RTX 3080 Xtreme 10G, 10GB GDDR6X (GV-N3080AORUS X-10GD)<br>- Gigabyte Aorus GeForce RTX 3080 Ti Master 12GB (GV-N308TAORUS M-12GD)<br>- Gigabyte Aorus GeForce RTX 3080 Ti Xtreme 12GB (GV-N308TAORUS X-12GD)<br>- Gigabyte Aorus GeForce RTX 3090 Master 24G, 24GB GDDR6X (GV-N3090AORUS M-24GD)<br>- Gigabyte Aorus GeForce RTX 3090 Xtreme 24G, 24GB GDDR6X (GV-N3090AORUS X-24GD)<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data radiator</b></td></tr><tr><td>L x W x H</td><td>395 x 124 x 30mm (+/- 3%)</td></tr><tr><td>Material cooling fins, chambers & channels</td><td>Copper</td></tr><tr><td>Material threads</td><td>Brass</td></tr><tr><td>Material outer housing</td><td>stainless steel</td></tr><tr><td>G 1/4“ threads</td><td>2 x for tubes (+ 1x Fillport G1/4“)</td></tr><tr><td>For fan size</td><td>120 mm</td></tr><tr><td>Possible fan assembly</td><td>3 x one-sided / 6 x both-sided</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data cooler and pump</b></td></tr><tr><td>L x W x H</td><td>269,5 x 146 x 46mm</td></tr><tr><td>Material cooler bottom</td><td>Chrome plated copper</td></tr><tr><td>Material cooler top</td><td>PMMA</td></tr><tr><td>Threads</td><td>2 x G1/4“</td></tr><tr><td>Pump type</td><td>DC-LT 2</td></tr><tr><td>Pump speed</td><td>2600 rpm (+/- 10%)</td></tr><tr><td>Head of delivery</td><td>1 m</td></tr><tr><td>Maximum flow rate</td><td>72 L/h</td></tr><tr><td>Voltage</td><td>6-13.5V DC</td></tr><tr><td>Power consumption</td><td>3.2W</td></tr><tr><td>MTBF</td><td>50.000 h</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data liquid</b></td></tr><tr><td>Color</td><td>clear</td></tr><tr><td>Ingredient 1</td><td>Destilled water (CAS-number 7732-18-5)</td></tr><tr><td>Ingredient 2</td><td>Glysantin (CAS-number 1017-21-1)</td></tr><tr><td>Working temperatures</td><td>-15 C° / +90 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data quick fasteners</b></td></tr><tr><td>L x D</td><td>95 x 27mm</td></tr><tr><td>Material</td><td>Nylon</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Color</td><td>Black</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fittings</b></td></tr><tr><td>L x D straight fitting</td><td>24 x 18mm</td></tr><tr><td>Quantity straight fittings</td><td>2x</td></tr><tr><td>L x B x H 90° fitting</td><td>35 x 27 x 17mm</td></tr><tr><td>Quantity 90° fittings</td><td>2x</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Material fittings</td><td>Brass</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data tube</b></td></tr><tr><td>Length</td><td>50cm</td></tr><tr><td>Material tube</td><td>TPV (EPDM/PP)</td></tr><tr><td>Color</td><td>Matt black</td></tr><tr><td>Tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Hardness grade</td><td>35 Shore-A to 50 Shore-D</td></tr><tr><td>Working temperature</td><td>-50 to +155 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fan</b></td></tr><tr><td>Speed</td><td>0 - 2500 RPM</td></tr><tr><td>Static pressure</td><td>3,17 mm H2O</td></tr><tr><td>Air flow rate</td><td>119,8 m³/h</td></tr><tr><td>Bearings</td><td>Sleeve bearing</td></tr><tr><td>Fan connector</td><td>4-Pin PWM</td></tr><tr><td>Connection Digital aRGB</td><td>3-Pin JST + 3-Pin 5V</td></tr><tr><td>Dimensions</td><td>120 x 120 x 25mm</td></tr><tr><td>Net weight</td><td>187g</td></tr><tr><td>Max working temperature</td><td>60°C</td></tr></table><br></p>

All-In-One Full-Cover-Wasserkühlung von Alphacool, für RTX 3080/3090 FTW3-Grafikkarten von EVGA, mit 360-mm-Vollkupfer-Radiator, drei 120-mm-RGB-Lüfter, vernickelter Kühlerboden + Acryldeckel, eingebaute DC-LT-2-Pumpe, digital adressierbare RGB-LED-Beleuchtung, erweiterbar durch Schnellverschlüsse

All-In-One Full-Cover-Wasserkühlung von Alphacool, für RTX 3080/3080 Ti/3090 Grafikkarten von GIGABYTE, mit 360-mm-Vollkupfer-Radiator, drei 120-mm-RGB-Lüfter, vernickelter Kühlerboden + Acryldeckel, eingebaute DC-LT-2-Pumpe, digital adressierbare RGB-LED-Beleuchtung, erweiterbar durch Schnellverschlüsse

<p style="text-align: justify;">The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans.<br /><br /><b>Fullcover Waterblock?</b><br />The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler.<br /><br /><b>Pump</b><br />The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal.<br /><br /><b>Fittings and Tubing</b><br />As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly.<br /><br /><b>Expandability</b><br />By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together.<br /><br /><b>Lighting and fans</b><br />The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm.<br /><br /><b>NexXxoS Radiator</b><br />As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success.<br /><br />The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop.<br /><br /><b>Technical note!</b><br />Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.<p> </p><b>Compatibility:</b><br>- Asus ROG Strix GeForce RTX 3080 OC, ROG-STRIX-RTX3080-O10G-GAMING, 10GB GDDR6X (90YV0FA1-M0NM00)<br>- Asus ROG Strix GeForce RTX 3080 OC, ROG-STRIX-RTX3080-O12G-GAMING, 12GB GDDR6X (90YV0FAC-M0NM00)<br>- Asus ROG Strix GeForce RTX 3080, ROG-STRIX-RTX3080-10G-GAMING, 10GB GDDR6X (90YV0FA0-M0NM00)<br>- Asus ROG Strix GeForce RTX 3080, ROG-STRIX-RTX3080-12G-GAMING, 12GB GDDR6X (90YV0FAD-M0NM00)<br>- Asus GeForce RTX 3080 Ti STRIX LC Liquid Cooled<br>- Asus ROG Strix GeForce RTX 3080 Ti Gaming (ROG-STRIX-RTX3080TI-12G-GAMING)<br>- Asus ROG Strix GeForce RTX 3080 Ti Gaming OC (ROG-STRIX-RTX3080TI-O12G-GAMING)<br>- Asus ROG Strix GeForce RTX 3090 OC, ROG-STRIX-RTX3090-O24G-GAMING, 24GB GDDR6X (90YV0F93-M0NM00)<br>- Asus ROG Strix GeForce RTX 3090, ROG-STRIX-RTX3090-24G-GAMING, 24GB GDDR6X (90YV0F90-M0NM00)<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data radiator</b></td></tr><tr><td>L x W x H</td><td>395 x 124 x 30mm (+/- 3%)</td></tr><tr><td>Material cooling fins, chambers & channels</td><td>Copper</td></tr><tr><td>Material threads</td><td>Brass</td></tr><tr><td>Material outer housing</td><td>stainless steel</td></tr><tr><td>G 1/4“ threads</td><td>2 x for tubes (+ 1x Fillport G1/4“)</td></tr><tr><td>For fan size</td><td>120 mm</td></tr><tr><td>Possible fan assembly</td><td>3 x one-sided / 6 x both-sided</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data cooler and pump</b></td></tr><tr><td>L x W x H</td><td>162,5 x 266 x 46mm</td></tr><tr><td>Material cooler bottom</td><td>Chrome plated copper</td></tr><tr><td>Material cooler top</td><td>PMMA</td></tr><tr><td>Threads</td><td>2 x G1/4“</td></tr><tr><td>Pump type</td><td>DC-LT 2</td></tr><tr><td>Pump speed</td><td>2600 rpm (+/- 10%)</td></tr><tr><td>Head of delivery</td><td>1 m</td></tr><tr><td>Maximum flow rate</td><td>72 L/h</td></tr><tr><td>Voltage</td><td>6-13.5V DC</td></tr><tr><td>Power consumption</td><td>3.2W</td></tr><tr><td>MTBF</td><td>50.000 h</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data liquid</b></td></tr><tr><td>Color</td><td>clear</td></tr><tr><td>Ingredient 1</td><td>Destilled water (CAS-number 7732-18-5)</td></tr><tr><td>Ingredient 2</td><td>Glysantin (CAS-number 1017-21-1)</td></tr><tr><td>Working temperatures</td><td>-15 C° / +90 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data quick fasteners</b></td></tr><tr><td>L x D</td><td>95 x 27mm</td></tr><tr><td>Material</td><td>Nylon</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Color</td><td>Black</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fittings</b></td></tr><tr><td>L x D straight fitting</td><td>24 x 18mm</td></tr><tr><td>Quantity straight fittings</td><td>2x</td></tr><tr><td>L x B x H 90° fitting</td><td>35 x 27 x 17mm</td></tr><tr><td>Quantity 90° fittings</td><td>2x</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Material fittings</td><td>Brass</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data tube</b></td></tr><tr><td>Length</td><td>50cm</td></tr><tr><td>Material tube</td><td>TPV (EPDM/PP)</td></tr><tr><td>Color</td><td>Matt black</td></tr><tr><td>Tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Hardness grade</td><td>35 Shore-A to 50 Shore-D</td></tr><tr><td>Working temperature</td><td>-50 to +155 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fan</b></td></tr><tr><td>Speed</td><td>0 - 2500 RPM</td></tr><tr><td>Static pressure</td><td>3,17 mm H2O</td></tr><tr><td>Air flow rate</td><td>119,8 m³/h</td></tr><tr><td>Bearings</td><td>Sleeve bearing</td></tr><tr><td>Fan connector</td><td>4-Pin PWM</td></tr><tr><td>Connection Digital aRGB</td><td>3-Pin JST + 3-Pin 5V</td></tr><tr><td>Dimensions</td><td>120 x 120 x 25mm</td></tr><tr><td>Net weight</td><td>187g</td></tr><tr><td>Max working temperature</td><td>60°C</td></tr></table><br></p>

<p style="text-align: justify;">The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans.<br /><br /><b>Fullcover Waterblock?</b><br />The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler.<br /><br /><b>Pump</b><br />The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal.<br /><br /><b>Fittings and Tubing</b><br />As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly.<br /><br /><b>Expandability</b><br />By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together.<br /><br /><b>Lighting and fans</b><br />The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm.<br /><br /><b>NexXxoS Radiator</b><br />As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success.<br /><br />The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop.<br /><br /><b>Technical note!</b><br />Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.<p> </p><b>Compatibility:</b><br>- MSI GeForce RTX 3080 Gaming X Trio 10G, 10GB GDDR6X (V389-005R)<br>- MSI GeForce RTX 3080 Gaming Z Trio 10G, 10GB GDDR6X (V389-045R)<br>- MSI GeForce RTX 3080 Gaming Z Trio 12G LHR, 12GB GDDR6X (V389-402R)<br>- MSI GeForce RTX 3080 Suprim X 10G, 10GB GDDR6X<br>- MSI GeForce RTX 3080 Suprim X 12G LHR, 12GB GDDR6X<br>- MSI GeForce RTX 3080 Ti Gaming X Trio 12G<br>- MSI GeForce RTX 3080 Ti Suprim X<br>- MSI GeForce RTX 3090 Gaming X Trio, 24GB GDDR6X (V388-011R)<br>- MSI GeForce RTX 3090 Suprim X 24G, 24GB GDDR6X<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data radiator</b></td></tr><tr><td>L x W x H</td><td>395 x 124 x 30mm (+/- 3%)</td></tr><tr><td>Material cooling fins, chambers & channels</td><td>Copper</td></tr><tr><td>Material threads</td><td>Brass</td></tr><tr><td>Material outer housing</td><td>stainless steel</td></tr><tr><td>G 1/4“ threads</td><td>2 x for tubes (+ 1x Fillport G1/4“)</td></tr><tr><td>For fan size</td><td>120 mm</td></tr><tr><td>Possible fan assembly</td><td>3 x one-sided / 6 x both-sided</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data cooler and pump</b></td></tr><tr><td>L x W x H</td><td>295 x 161,9 x 46mm</td></tr><tr><td>Material cooler bottom</td><td>Chrome plated copper</td></tr><tr><td>Material cooler top</td><td>acrylic</td></tr><tr><td>Threads</td><td>2 x G1/4“</td></tr><tr><td>Pump type</td><td>DC-LT 2</td></tr><tr><td>Pump speed</td><td>2600 rpm (+/- 10%)</td></tr><tr><td>Head of delivery</td><td>1 m</td></tr><tr><td>Maximum flow rate</td><td>72 L/h</td></tr><tr><td>Voltage</td><td>6-13.5V DC</td></tr><tr><td>Power consumption</td><td>3.2W</td></tr><tr><td>MTBF</td><td>50.000 h</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data liquid</b></td></tr><tr><td>Color</td><td>clear</td></tr><tr><td>Ingredient 1</td><td>Destilled water (CAS-number 7732-18-5)</td></tr><tr><td>Ingredient 2</td><td>Glysantin (CAS-number 1017-21-1)</td></tr><tr><td>Working temperatures</td><td>-15 C° / +90 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data quick fasteners</b></td></tr><tr><td>L x D</td><td>95 x 27mm</td></tr><tr><td>Material</td><td>Nylon</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Color</td><td>Black</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fittings</b></td></tr><tr><td>L x D straight fitting</td><td>24 x 18mm</td></tr><tr><td>Quantity straight fittings</td><td>2x</td></tr><tr><td>L x B x H 90° fitting</td><td>35 x 27 x 17mm</td></tr><tr><td>Quantity 90° fittings</td><td>2x</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Material fittings</td><td>Brass</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data tube</b></td></tr><tr><td>Length</td><td>50cm</td></tr><tr><td>Material tube</td><td>TPV (EPDM/PP)</td></tr><tr><td>Color</td><td>Matt black</td></tr><tr><td>Tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Hardness grade</td><td>35 Shore-A to 50 Shore-D</td></tr><tr><td>Working temperature</td><td>-50 to +155 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fan</b></td></tr><tr><td>Speed</td><td>0 - 2500 RPM</td></tr><tr><td>Static pressure</td><td>3,17 mm H2O</td></tr><tr><td>Air flow rate</td><td>119,8 m³/h</td></tr><tr><td>Bearings</td><td>Sleeve bearing</td></tr><tr><td>Fan connector</td><td>4-Pin PWM</td></tr><tr><td>Connection Digital aRGB</td><td>3-Pin JST + 3-Pin 5V</td></tr><tr><td>Dimensions</td><td>120 x 120 x 25mm</td></tr><tr><td>Net weight</td><td>187g</td></tr><tr><td>Max working temperature</td><td>60°C</td></tr></table><br></p>

All-In-One Full-Cover-Wasserkühlung von Alphacool, für RTX 3080/3080 Ti/3090 TUF-Gaming-Grafikkarten von ASUS, mit 360-mm-Vollkupfer-Radiator, drei 120-mm-RGB-Lüfter, vernickelter Kühlerboden + Acryldeckel, eingebaute DC-LT-2-Pumpe, digital adressierbare RGB-LED-Beleuchtung, erweiterbar durch Schnellverschlüsse

All-In-One Full-Cover-Wasserkühlung von Alphacool, für RTX 3080/3080 Ti/3090 Ventus-3X-Grafikkarten von MSI, mit 360-mm-Vollkupfer-Radiator, drei 120-mm-RGB-Lüfter, vernickelter Kühlerboden + Acryldeckel, eingebaute DC-LT-2-Pumpe, digital adressierbare RGB-LED-Beleuchtung, erweiterbar durch Schnellverschlüsse

<p style="text-align: justify;">The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans.<br /><br /><b>Fullcover Waterblock?</b><br />The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler.<br /><br /><b>Pump</b><br />The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal.<br /><br /><b>Fittings and Tubing</b><br />As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly.<br /><br /><b>Expandability</b><br />By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together.<br /><br /><b>Lighting and fans</b><br />The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm.<br /><br /><b>NexXxoS Radiator</b><br />As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success.<br /><br />The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop.<br /><br /><b>Technical note!</b><br />Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.<p> </p><b>Compatibility:</b><br>- Nvidia 3090 Founders Edition<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Data radiator</b></td></tr><tr><td>L x W x H</td><td>395 x 124 x 30mm (+/- 3%)</td></tr><tr><td>Material cooling fins</td><td>Copper</td></tr><tr><td>Material chambers</td><td>Copper</td></tr><tr><td>Material cooling channels</td><td>Copper</td></tr><tr><td>Material threads</td><td>Brass</td></tr><tr><td>Material outer housing</td><td>stainless steel</td></tr><tr><td>G 1/4“ threads</td><td>2 x for tubes (+ 1x Fillport G1/4“)</td></tr><tr><td>For fan size</td><td>120 mm</td></tr><tr><td>Possible fan assembly</td><td>3 x one-sided / 6 x both-sided</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Data cooler and pump</b></td></tr><tr><td>L x W x H</td><td>231,5 x 120,7 x 46 mm</td></tr><tr><td>Material cooler bottom</td><td>Chrome plated copper</td></tr><tr><td>Material cooler top</td><td>acrylic</td></tr><tr><td>Threads</td><td>2 x G1/4“</td></tr><tr><td>Pump type</td><td>DC-LT 2</td></tr><tr><td>Pump speed</td><td>2600 rpm (+/- 10%)</td></tr><tr><td>Head of delivery</td><td>1 m</td></tr><tr><td>Maximum flow rate</td><td>72 L/h</td></tr><tr><td>Voltage</td><td>6-13.5V DC</td></tr><tr><td>Power consumption</td><td>3.2W</td></tr><tr><td>MTBF</td><td>50.000 h</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Data liquid</b></td></tr><tr><td>Color</td><td>clear</td></tr><tr><td>Ingredient 1</td><td>Destilled water (CAS-number 7732-18-5)</td></tr><tr><td>Ingredient 2</td><td>Glysantin (CAS-number 1017-21-1)</td></tr><tr><td>Working temperatures</td><td>-15 C° / +90 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Data quick fasteners</b></td></tr><tr><td>L x D</td><td>95 x 27 mm</td></tr><tr><td>Material</td><td>Nylon</td></tr><tr><td>For tube size</td><td>12,7 / 7,6 mm</td></tr><tr><td>Color</td><td>Black</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Data fittings</b></td></tr><tr><td>L x D straight fitting</td><td>24 x 18 mm</td></tr><tr><td>Quantity straight fittings</td><td>2x</td></tr><tr><td>L x B x H 90° fitting</td><td>35 x 27 x 17 mm</td></tr><tr><td>Quantity 90° fittings</td><td>2x</td></tr><tr><td>For tube size</td><td>12,7 / 7,6 mm</td></tr><tr><td>Material fittings</td><td>Brass</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Data tube</b></td></tr><tr><td>Length</td><td>50 cm</td></tr><tr><td>Material tube</td><td>TPV (EPDM/PP)</td></tr><tr><td>Color</td><td>Matt black</td></tr><tr><td>Tube size</td><td>12,7 / 7,6 mm</td></tr><tr><td>Hardness grade</td><td>35 Shore-A to 50 Shore-D</td></tr><tr><td>Working temperature</td><td>-50 to +155 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Data fan</b></td></tr><tr><td>Speed</td><td>0 - 2500 RPM</td></tr><tr><td>Static pressure</td><td>3,17 mm H2O</td></tr><tr><td>Air flow rate</td><td>119,8 m³/h</td></tr><tr><td>Bearings</td><td>Sleeve bearing</td></tr><tr><td>Fan connector</td><td>4-Pin PWM</td></tr><tr><td>Connection Digital aRGB</td><td>3-Pin JST + 3-Pin 5V</td></tr><tr><td>Dimensions</td><td>120 x 120 x 25 mm</td></tr><tr><td>Net weight</td><td>187 g</td></tr><tr><td>Max working temperature</td><td>60 °C</td></tr></table><br></p>

<p style="text-align: justify;">The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans.<br /><br /><b>Fullcover Waterblock?</b><br />The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler.<br /><br /><b>Pump</b><br />The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal.<br /><br /><b>Fittings and Tubing</b><br />As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly.<br /><br /><b>Expandability</b><br />By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together.<br /><br /><b>Lighting and fans</b><br />The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm.<br /><br /><b>NexXxoS Radiator</b><br />As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success.<br /><br />The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop.<br /><br /><b>Technical note!</b><br />Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.<p> </p><b>Compatibility:</b><br>- Inno3D GEFORCE RTX 3090 TI ICHILL FROSTBITE<br>- Inno3D GEFORCE RTX 3090 TI X3 OC<br>- Nvidia 3090 Ti Founders Edition<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data radiator</b></td></tr><tr><td>L x W x H</td><td>395 x 124 x 30mm (+/- 3%)</td></tr><tr><td>Material cooling fins, chambers & channels</td><td>Copper</td></tr><tr><td>Material threads</td><td>Brass</td></tr><tr><td>Material outer housing</td><td>stainless steel</td></tr><tr><td>G 1/4“ threads</td><td>2 x for tubes (+ 1x Fillport G1/4“)</td></tr><tr><td>For fan size</td><td>120 mm</td></tr><tr><td>Possible fan assembly</td><td>3 x one-sided / 6 x both-sided</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data cooler and pump</b></td></tr><tr><td>L x W x H</td><td>220,5 x 156,05 x 46mm</td></tr><tr><td>Material cooler bottom</td><td>Chrome plated copper</td></tr><tr><td>Material cooler top</td><td>acrylic</td></tr><tr><td>Threads</td><td>2 x G1/4“</td></tr><tr><td>Pump type</td><td>DC-LT 2</td></tr><tr><td>Pump speed</td><td>2600 rpm (+/- 10%)</td></tr><tr><td>Head of delivery</td><td>1 m</td></tr><tr><td>Maximum flow rate</td><td>72 L/h</td></tr><tr><td>Voltage</td><td>6-13.5V DC</td></tr><tr><td>Power consumption</td><td>3.2W</td></tr><tr><td>MTBF</td><td>50.000 h</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data liquid</b></td></tr><tr><td>Color</td><td>clear</td></tr><tr><td>Ingredient 1</td><td>Destilled water (CAS-number 7732-18-5)</td></tr><tr><td>Ingredient 2</td><td>Glysantin (CAS-number 1017-21-1)</td></tr><tr><td>Working temperatures</td><td>-15 C° / +90 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data quick fasteners</b></td></tr><tr><td>L x D</td><td>95 x 27mm</td></tr><tr><td>Material</td><td>Nylon</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Color</td><td>Black</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fittings</b></td></tr><tr><td>L x D straight fitting</td><td>24 x 18mm</td></tr><tr><td>Quantity straight fittings</td><td>2x</td></tr><tr><td>L x B x H 90° fitting</td><td>35 x 27 x 17mm</td></tr><tr><td>Quantity 90° fittings</td><td>2x</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Material fittings</td><td>Brass</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data tube</b></td></tr><tr><td>Length</td><td>50cm</td></tr><tr><td>Material tube</td><td>TPV (EPDM/PP)</td></tr><tr><td>Color</td><td>Matt black</td></tr><tr><td>Tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Hardness grade</td><td>35 Shore-A to 50 Shore-D</td></tr><tr><td>Working temperature</td><td>-50 to +155 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fan</b></td></tr><tr><td>Speed</td><td>0 - 2500 RPM</td></tr><tr><td>Static pressure</td><td>3,17 mm H2O</td></tr><tr><td>Air flow rate</td><td>119,8 m³/h</td></tr><tr><td>Bearings</td><td>Sleeve bearing</td></tr><tr><td>Fan connector</td><td>4-Pin PWM</td></tr><tr><td>Connection Digital aRGB</td><td>3-Pin JST + 3-Pin 5V</td></tr><tr><td>Dimensions</td><td>120 x 120 x 25mm</td></tr><tr><td>Net weight</td><td>187g</td></tr><tr><td>Max working temperature</td><td>60°C</td></tr></table><br></p>

All-In-One Full-Cover-Wasserkühlung von Alphacool, für RTX 3090 Ti FTW3-Grafikkarten von EVGA, mit 360-mm-Vollkupfer-Radiator, drei 120-mm-RGB-Lüfter, vernickelter Kühlerboden + Acryldeckel, eingebaute DC-LT-2-Pumpe, digital adressierbare RGB-LED-Beleuchtung, erweiterbar durch Schnellverschlüsse

All-In-One Full-Cover-Wasserkühlung von Alphacool, für RTX 3090 Ti Strix/TUF-Grafikkarten von ASUS, mit 360-mm-Vollkupfer-Radiator, drei 120-mm-RGB-Lüfter, vernickelter Kühlerboden + Acryldeckel, eingebaute DC-LT-2-Pumpe, digital adressierbare RGB-LED-Beleuchtung, erweiterbar durch Schnellverschlüsse

<p style="text-align: justify;">The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans.<br /><br /><b>Fullcover Waterblock?</b><br />The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler.<br /><br /><b>Pump</b><br />The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal.<br /><br /><b>Fittings and Tubing</b><br />As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly.<br /><br /><b>Expandability</b><br />By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together.<br /><br /><b>Lighting and fans</b><br />The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm.<br /><br /><b>NexXxoS Radiator</b><br />As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success.<br /><br />The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop.<br /><br /><b>Technical note!</b><br />Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.<p> </p><b>Compatibility:</b><br>- MSI GeForce RTX 3090 Ti Gaming Trio 24G, 24GB GDDR6X (V509-029R)<br>- MSI GeForce RTX 3090 Ti Gaming X Trio 24G, 24GB GDDR6X (V509-014R)<br>- MSI GeForce RTX 3090 Ti Suprim 24G, 24GB GDDR6X<br>- MSI GeForce RTX 3090 Ti Suprim X 24G, 24GB GDDR6X (V509-003R)<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data radiator</b></td></tr><tr><td>L x W x H</td><td>395 x 124 x 30mm (+/- 3%)</td></tr><tr><td>Material cooling fins, chambers & channels</td><td>Copper</td></tr><tr><td>Material threads</td><td>Brass</td></tr><tr><td>Material outer housing</td><td>stainless steel</td></tr><tr><td>G 1/4“ threads</td><td>2 x for tubes (+ 1x Fillport G1/4“)</td></tr><tr><td>For fan size</td><td>120 mm</td></tr><tr><td>Possible fan assembly</td><td>3 x one-sided / 6 x both-sided</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data cooler and pump</b></td></tr><tr><td>L x W x H</td><td>265,8 x 162,5 x 46mm</td></tr><tr><td>Material cooler bottom</td><td>Chrome plated copper</td></tr><tr><td>Material cooler top</td><td>acrylic</td></tr><tr><td>Threads</td><td>2 x G1/4“</td></tr><tr><td>Pump type</td><td>DC-LT 2</td></tr><tr><td>Pump speed</td><td>2600 rpm (+/- 10%)</td></tr><tr><td>Head of delivery</td><td>1 m</td></tr><tr><td>Maximum flow rate</td><td>72 L/h</td></tr><tr><td>Voltage</td><td>6-13.5V DC</td></tr><tr><td>Power consumption</td><td>3.2W</td></tr><tr><td>MTBF</td><td>50.000 h</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data liquid</b></td></tr><tr><td>Color</td><td>clear</td></tr><tr><td>Ingredient 1</td><td>Destilled water (CAS-number 7732-18-5)</td></tr><tr><td>Ingredient 2</td><td>Glysantin (CAS-number 1017-21-1)</td></tr><tr><td>Working temperatures</td><td>-15 C° / +90 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data quick fasteners</b></td></tr><tr><td>L x D</td><td>95 x 27mm</td></tr><tr><td>Material</td><td>Nylon</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Color</td><td>Black</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fittings</b></td></tr><tr><td>L x D straight fitting</td><td>24 x 18mm</td></tr><tr><td>Quantity straight fittings</td><td>2x</td></tr><tr><td>L x B x H 90° fitting</td><td>35 x 27 x 17mm</td></tr><tr><td>Quantity 90° fittings</td><td>2x</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Material fittings</td><td>Brass</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data tube</b></td></tr><tr><td>Length</td><td>50cm</td></tr><tr><td>Material tube</td><td>TPV (EPDM/PP)</td></tr><tr><td>Color</td><td>Matt black</td></tr><tr><td>Tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Hardness grade</td><td>35 Shore-A to 50 Shore-D</td></tr><tr><td>Working temperature</td><td>-50 to +155 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fan</b></td></tr><tr><td>Speed</td><td>0 - 2500 RPM</td></tr><tr><td>Static pressure</td><td>3,17 mm H2O</td></tr><tr><td>Air flow rate</td><td>119,8 m³/h</td></tr><tr><td>Bearings</td><td>Sleeve bearing</td></tr><tr><td>Fan connector</td><td>4-Pin PWM</td></tr><tr><td>Connection Digital aRGB</td><td>3-Pin JST + 3-Pin 5V</td></tr><tr><td>Dimensions</td><td>120 x 120 x 25mm</td></tr><tr><td>Net weight</td><td>187g</td></tr><tr><td>Max working temperature</td><td>60°C</td></tr></table><br></p>

All-In-One Full-Cover-Wasserkühlung von Alphacool, für RTX 3080/3090 Grafikkarten im Referenzdesign, mit 360-mm-Vollkupfer-Radiator, drei 120-mm-RGB-Lüfter, vernickelter Kühlerboden + Acryldeckel, eingebaute DC-LT-2-Pumpe, digital adressierbare RGB-LED-Beleuchtung, erweiterbar durch Schnellverschlüsse

<p style="text-align: justify;">The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans.<br /><br /><b>Fullcover Waterblock?</b><br />The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler.<br /><br /><b>Chrome-plated copper</b><br />The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers.<br /><br /><b>Pump</b><br />The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal.<br /><br /><b>Fittings and Tubing</b><br />As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly.<br /><br /><b>Expandability</b><br />By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together.<br /><br /><b>Lighting and fans</b><br />The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm.<br /><br /><b>NexXxoS Radiator</b><br />As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success.<br /><br />The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop.<br /><br /><b>Technical note!</b><br />Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.<p> </p><b>Compatibility:</b><br>- Nvidia GeForce RTX 4080 Founders Edition, 16GB GDDR6X (900-1G136-2560-000)<br>- Nvidia GeForce RTX 4080 Super Founders Edition<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data radiator</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>395 x 124 x 30mm (+/- 3%)</td></tr><tr><td>Material cooling fins, chambers & channels</td><td>Copper</td></tr><tr><td>Material threads</td><td>Brass</td></tr><tr><td>Material outer housing</td><td>stainless steel</td></tr><tr><td>G 1/4“ threads</td><td>2 x for tubes (+ 1x Fillport G1/4“)</td></tr><tr><td>For fan size</td><td>120 mm</td></tr><tr><td>Options for fan assembly</td><td>3 x one-sided / 6 x both-sided</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data cooler and pump</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>205,42 x 156,89 x 47,30 mm</td></tr><tr><td>Material cooler bottom</td><td>Chrome plated copper</td></tr><tr><td>Material cooler top</td><td>acrylic</td></tr><tr><td>Threads</td><td>2 x G1/4“</td></tr><tr><td>Pump type</td><td>DC-LT 2</td></tr><tr><td>Pump speed</td><td>2600 rpm (+/- 10%)</td></tr><tr><td>Head of delivery</td><td>1 m</td></tr><tr><td>Maximum flow rate</td><td>72 L/h</td></tr><tr><td>Voltage</td><td>6-13.5V DC</td></tr><tr><td>Power consumption</td><td>3.2W</td></tr><tr><td>MTBF</td><td>50.000 h</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data liquid</b></td></tr><tr><td>Color</td><td>clear</td></tr><tr><td>Ingredient 1</td><td>Destilled water (CAS-number 7732-18-5)</td></tr><tr><td>Ingredient 2</td><td>Glysantin (CAS-number 1017-21-1)</td></tr><tr><td>Working temperatures</td><td>-15 C° / +90 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data quick fasteners</b></td></tr><tr><td>Dimensions (L x D)</td><td>95 x 27mm</td></tr><tr><td>Material</td><td>Nylon</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Color</td><td>Black</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fittings</b></td></tr><tr><td>L x D straight fitting</td><td>24 x 18mm</td></tr><tr><td>Quantity straight fittings</td><td>2x</td></tr><tr><td>L x B x H 90° fitting</td><td>35 x 27 x 17mm</td></tr><tr><td>Quantity 90° fittings</td><td>2x</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Material fittings</td><td>Brass</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data tube</b></td></tr><tr><td>Length</td><td>50cm</td></tr><tr><td>Material tube</td><td>TPV (EPDM/PP)</td></tr><tr><td>Color</td><td>Matt black</td></tr><tr><td>Tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Hardness grade</td><td>35 Shore-A to 50 Shore-D</td></tr><tr><td>Working temperature</td><td>-50 to +155 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fan</b></td></tr><tr><td>Speed</td><td>0 - 2500 RPM</td></tr><tr><td>Static pressure</td><td>3,17 mm H2O</td></tr><tr><td>Air flow rate</td><td>119,8 m³/h</td></tr><tr><td>Bearings</td><td>Sleeve bearing</td></tr><tr><td>Fan connector</td><td>4-Pin PWM</td></tr><tr><td>Connection Digital aRGB</td><td>3-Pin JST + 3-Pin 5V</td></tr><tr><td>Dimensions (L x W x H)</td><td>120 x 120 x 25mm</td></tr><tr><td>Net weight</td><td>187g</td></tr><tr><td>Max working temperature</td><td>60°C</td></tr></table><br></p>

<p style="text-align: justify;">The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans.<br /><br /><b>Fullcover Waterblock?</b><br />The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler.<br /><br /><b>Chrome-plated copper</b><br />The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers.<br /><br /><b>Pump</b><br />The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal.<br /><br /><b>Fittings and Tubing</b><br />As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly.<br /><br /><b>Expandability</b><br />By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together.<br /><br /><b>Lighting and fans</b><br />The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm.<br /><br /><b>NexXxoS Radiator</b><br />As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success.<br /><br />The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop.<br /><br /><b>Technical note!</b><br />Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.<p> </p><b>Compatibility:</b><br>Attention! For PNY GeForce RTX 4080 the rear part of the PCB is not covered. This has no negative effect on the cooling performance<br>- Inno3D GeForce RTX 4080 iCHILL X3, 16GB GDDR6X (C40803-166XX-187049H)<br>- Inno3D GeForce RTX 4080 X3 OC, 16GB GDDR6X<br>- Inno3D GeForce RTX 4080 X3, 16GB GDDR6X<br>- PNY GeForce RTX 4080 16GB Verto Triple Fan, 16GB GDDR6X (VCG408016TFXPB1)<br>- PNY GeForce RTX 4080 16GB XLR8 Gaming Verto Epic-X RGB Overclocked Triple Fan, 16GB GDDR6X (VCG408016TFXXPB1-O)<br>- PNY GeForce RTX 4080 16GB XLR8 Gaming Verto Epic-X RGB Triple Fan, 16GB GDDR6X (VCG408016TFXXPB1)<br>- Inno3D GeForce RTX 4080 SUPER iCHILL Black, 16GB GDDR6X (C408SB-166XX-18700006)<br>- Inno3D GeForce RTX 4080 SUPER iCHILL Frostbite, 16GB GDDR6X (C408S-166XX-1870FB)<br>- Inno3D GeForce RTX 4080 SUPER iCHILL X3, 16GB GDDR6X (C408S3-166XX-187049H)<br>- Inno3D GeForce RTX 4080 SUPER X3 OC, 16GB GDDR6X (N408S3-166XX-187049N)<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data radiator</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>395 x 124 x 30mm (+/- 3%)</td></tr><tr><td>Material cooling fins, chambers & channels</td><td>Copper</td></tr><tr><td>Material threads</td><td>Brass</td></tr><tr><td>Material outer housing</td><td>stainless steel</td></tr><tr><td>G 1/4“ threads</td><td>2 x for tubes (+ 1x Fillport G1/4“)</td></tr><tr><td>For fan size</td><td>120 mm</td></tr><tr><td>Options for fan assembly</td><td>3 x one-sided / 6 x both-sided</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data cooler and pump</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>198,41 x 154,19 x 48,04mm</td></tr><tr><td>Material cooler bottom</td><td>Chrome plated copper</td></tr><tr><td>Material cooler top</td><td>acrylic</td></tr><tr><td>Threads</td><td>2 x G1/4“</td></tr><tr><td>Pump type</td><td>DC-LT 2</td></tr><tr><td>Pump speed</td><td>2600 rpm (+/- 10%)</td></tr><tr><td>Head of delivery</td><td>1 m</td></tr><tr><td>Maximum flow rate</td><td>72 L/h</td></tr><tr><td>Voltage</td><td>6-13.5V DC</td></tr><tr><td>Power consumption</td><td>3.2W</td></tr><tr><td>MTBF</td><td>50.000 h</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data liquid</b></td></tr><tr><td>Color</td><td>clear</td></tr><tr><td>Ingredient 1</td><td>Destilled water (CAS-number 7732-18-5)</td></tr><tr><td>Ingredient 2</td><td>Glysantin (CAS-number 1017-21-1)</td></tr><tr><td>Working temperatures</td><td>-15 C° / +90 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data quick fasteners</b></td></tr><tr><td>Dimensions (L x D)</td><td>95 x 27mm</td></tr><tr><td>Material</td><td>Nylon</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Color</td><td>Black</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fittings</b></td></tr><tr><td>Dimensions (L x D) straight fitting</td><td>24 x 18mm</td></tr><tr><td>Quantity straight fittings</td><td>2x</td></tr><tr><td>Dimensions (L x B x H) 90° fitting</td><td>35 x 27 x 17mm</td></tr><tr><td>Quantity 90° fittings</td><td>2x</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Material fittings</td><td>Brass</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data tube</b></td></tr><tr><td>Length</td><td>50cm</td></tr><tr><td>Material tube</td><td>TPV (EPDM/PP)</td></tr><tr><td>Color</td><td>Matt black</td></tr><tr><td>Tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Hardness grade</td><td>35 Shore-A to 50 Shore-D</td></tr><tr><td>Working temperature</td><td>-50 to +155 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fan</b></td></tr><tr><td>Speed</td><td>0 - 2500 RPM</td></tr><tr><td>Static pressure</td><td>3,17 mm H2O</td></tr><tr><td>Air flow rate</td><td>119,8 m³/h</td></tr><tr><td>Bearings</td><td>Sleeve bearing</td></tr><tr><td>Fan connector</td><td>4-Pin PWM</td></tr><tr><td>Connection Digital aRGB</td><td>3-Pin JST + 3-Pin 5V</td></tr><tr><td>Dimensions (L x W x H)</td><td>120 x 120 x 25mm</td></tr><tr><td>Net weight</td><td>187g</td></tr><tr><td>Max working temperature</td><td>60°C</td></tr></table><br></p>

All-in-One-Wasserkühlung, für Zotac Gaming GeForce RTX 4090-Grafikkarten, 360 mm Radiator, 3x 120-mm-PWM-Lüfter, mit integrierter RGB-Beleuchtung