Arvutitark OÜ

The Apex Soft are Alphacool's high-end solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Apex Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance. Better than standard thermal pads? The material of the Apex Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Apex Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component. But that is not the only advantage! The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Apex Soft thermal pads. They can be used for a much longer period of time without significantly losing performance. Cutting to size? No problem! When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray. The Alphacool Apex Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads. Technical data L x W x H 100 x 100 x 1 mm Colour grey Specific Gravitiy ASTM D792 3,4 g/cc Thermal Conductivity ASTM D5470 11.0 W/mK Hardness ASTM 2240 72 Shore OO Useful Temperature -40 to +150 °C Volume Resistivity ASTM D257 1.0x1011 Ohm-m Dielectric Constant ASTM D150 7,2 MHz Dielectric Breakdown Voltage ASTM D149 14 kV/mm Flame Rating UL 94 V-0 Weight 40 g Download Datasheet PDF: Alphacool Apex Soft Thermal Pad 11W/mk 100x100x1mm

The Apex Soft are Alphacool's high-end solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Apex Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance. Better than standard thermal pads? The material of the Apex Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Apex Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component. But that is not the only advantage! The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Apex Soft thermal pads. They can be used for a much longer period of time without significantly losing performance. Cutting to size? No problem! When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray. The Alphacool Apex Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads. Technical data L x W x H 120 x 20 x 1 mm Colour Grey Specific Gravitiy ASTM D792 3,4 g/cc Thermal Conductivity ASTM D5470 11.0 W/mK Hardness ASTM 2240 72 Shore OO Useful Temperature -40 to +150 °C Volume Resistivity ASTM D257 1.0x1011 Ohm-m Dielectric Constant ASTM D150 7,2 MHz Dielectric Breakdown Voltage ASTM D149 14 kV/mm Flame Rating UL 94 V-0 Weight 20 g Download Datasheet PDF: Alphacool Apex Soft Thermal Pad 11W/mk 2x 120x20x1mm

The Apex Soft thermal pads are Alphacool’s high-end solution in the field of thermal interface materials. Thanks to their outstanding properties, they can almost be compared to thermal paste. Apex Soft thermal pads conform much better to components, resulting in a significant improvement in cooling performance.The material used in Apex Soft pads behaves similarly to thermal paste. Its consistency prevents higher-standing components, such as voltage regulators or VRAMs, from being subjected to excessive mounting pressure from the cooler — which, in the worst case, could lead to PCB bending. Apex Soft pads fill surface irregularities more effectively and conform more closely to component shapes, which significantly enhances thermal transfer between the cooler and the hardware.The special material also does not dry out over time. Standard thermal pads often begin to bleed silicone over time, making them hard and drastically reducing their performance. This is not the case with Apex Soft pads. They can be used for much longer periods without a noticeable drop in performance.When cutting the pads to size, it’s important to leave the protective film on. This allows the pads to be easily cut with scissors — just like cutting paper. The cut edges remain clean and do not fray.Alphacool’s Apex Soft thermal pads offer significantly better performance than conventional thermal pads in many aspects and are the perfect replacement for old or underperforming pads. Technical data thermal padDimensions (L x W x H)100 x 100 x 1,0mmSpecific gravity (ASTM D792)3.2 g/ccThermal Conductivity14.0 W/mKHardness (ASTM D2240)80 Shore OOWorking temperature-40 to +150 °CVolume Resistance (ASTM D257)1.0x10^11 Ohm-mDielectric Breakdown Voltage (ASTM D150)6.8 MHzDensity (ASTM D792)3.6 g/cm³ (±10%)Dielectric breakdown (ASTM D149)13 kV/mmFlame Rating (UL 94)V-0Colorgrey

The Apex Soft are Alphacool's high-end solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Apex Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance. Better than standard thermal pads? The material of the Apex Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Apex Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component. But that is not the only advantage! The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Apex Soft thermal pads. They can be used for a much longer period of time without significantly losing performance. Cutting to size? No problem! When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray. The Alphacool Apex Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads. Technical data L x W x H 120 x 20 x 1 mm Colour Grey Specific Gravitiy ASTM D792 3,2 g/cc Thermal Conductivity ASTM D5470 14.0 W/mK Hardness ASTM 2240 80 Shore OO Useful Temperature -40 to +150 °C Volume Resistivity ASTM D257 1.0x1011 Ohm-m Dielectric Constant ASTM D150 6,8 MHz Dielectric Breakdown Voltage ASTM D149 13 kV/mm Flame Rating UL 94 V-0 Weight 20 g Download Datasheet PDF: Alphacool Apex Soft Thermal Pad 14W/mk 2x 120x20x1mm

Case fan, completely metal housing, 120-millimeter format, PWM-controlled, 0-3,000 RPM, 117.21 m³/h airflow

Case fan, all-metal housing, 120-millimeter format, PWM-controlled, 0-2,000 RPM, 78.02 m³/h airflow

Case fan, full metal housing, 120 millimeter format, PWM-controlled, 0-2,000 RPM, 78.02 m³/h airflow

Case fan, full metal housing, 120-millimeter size, PWM-controlled, 0-2,000 RPM, 78.02 m³/h airflow

Case fan, all-metal housing, 120-millimeter format, PWM-controlled, 0-2,000 RPM, 78.02 m³/h airflow

Case fan, all-metal housing, 120-millimeter format, PWM-controlled, 0-3,000 RPM, 117.21 m³/h airflow

Case fan, full metal housing, 120-millimeter size, PWM-controlled, 0-3,000 RPM, 117.21 m³/h airflow

Alphacool Apex Stealth: High-End Metal Fan (White) with aRGB & Patented Decoupling The Alphacool Apex Stealth combines technical innovation with brilliant aesthetics. Featuring a solid die-cast zinc frame in elegant white, integrated aRGB lighting, and globally unique decoupling technology, this fan delivers superior performance with extremely quiet operation. Innovative Decoupling & Silent Operation The heart of the Apex Stealth is its patent-pending decoupling system. The impeller, motor, and suspension are completely isolated from the metal frame. A special damping system effectively absorbs vibrations before they can be transmitted to the chassis or radiator. White Die-cast Zinc Frame: Maximum stability combined with a premium finish and brilliant lighting effects. Closed Impeller: Prevents blade-tip fluttering at high speeds for optimized acoustics. 6-Pole Motor & Sleeve Bearing: Guarantees extreme smoothness and a long lifespan (100,000h MTBF). Versatile All-Rounder with aRGB With a control range from 300 to 2000 RPM and Zero-RPM control, the Apex Stealth is the ideal choice for both silent builds and high-performance workstations. Daisy-Chain System: PWM and aRGB cables can be easily connected in series and hidden neatly within the frame. Efficient Cooling: 2.36 mmH2O static pressure ensures excellent performance on radiators. Brilliant Lighting: Addressable LEDs perfectly showcase the curved frame design. Technical Specifications ParameterValue Dimensions / Weight 140 x 140 x 25 mm / 355 g Speed 300 - 2000 RPM (PWM) Pressure / Airflow 2.36 mmH2O / 75.12 CFM Lighting Digitally addressable aRGB LEDs Warranty 5 Years

Der Alphacool Apex Stealth Metall Lüfter überzeugt mit hochwertigem, elegantem und zeitlosem Design sowie technischer Innovation. Dank der Entkopplungstechnologie sind Lüfterblätter, Motor und Aufhängung vollständig vom robusten Metallrahmen entkoppelt, wodurch Vibrationen effektiv gedämpft werden. Der geschlossene Impellerrahmen verhindert Flattern bei hohen Drehzahlen, was zu besonders leisem Betrieb beiträgt. Der leistungsstarke Lüfter liefert hohe Luftdurchsätze und statischen Druck, eignet sich perfekt für Radiatoren und als Gehäuselüfter. Über den 4-Pin-PWM-Anschluss lässt sich die Drehzahl von 380 bis 2600 U/min steuern, inklusive Zero-RPM-Modus zum vollständigen Stillstand. Die Apex-Serie steht für erstklassige Materialien und innovative Technik, kombiniert mit brillanter aRGB-Beleuchtung und einem markanten Design, das sich in jeden PC-Build einfügt. Mehrere Lüfter können per Daisy Chain verbunden werden. Der 6-Pol-Motor mit Hydro Dynamic Bearing sorgt für leisen Lauf und hohe Langlebigkeit.

Der Alphacool Apex Stealth Metall Lüfter überzeugt mit hochwertigem, elegantem und zeitlosem Design sowie technischer Innovation. Dank der Entkopplungstechnologie sind Lüfterblätter, Motor und Aufhängung vollständig vom robusten Metallrahmen entkoppelt, wodurch Vibrationen effektiv gedämpft werden. Der geschlossene Impellerrahmen verhindert Flattern bei hohen Drehzahlen, was zu besonders leisem Betrieb beiträgt. Der leistungsstarke Lüfter liefert hohe Luftdurchsätze und statischen Druck, eignet sich perfekt für Radiatoren und als Gehäuselüfter. Über den 4-Pin-PWM-Anschluss lässt sich die Drehzahl von 380 bis 2600 U/min steuern, inklusive Zero-RPM-Modus zum vollständigen Stillstand. Die Apex-Serie steht für erstklassige Materialien und innovative Technik, kombiniert mit brillanter aRGB-Beleuchtung und einem markanten Design, das sich in jeden PC-Build einfügt. Mehrere Lüfter können per Daisy Chain verbunden werden. Der 6-Pol-Motor mit Hydro Dynamic Bearing sorgt für leisen Lauf und hohe Langlebigkeit.

Der Alphacool Apex Stealth Metall Lüfter überzeugt mit hochwertigem, elegantem und zeitlosem Design sowie technischer Innovation. Dank der Entkopplungstechnologie sind Lüfterblätter, Motor und Aufhängung vollständig vom robusten Metallrahmen entkoppelt, wodurch Vibrationen effektiv gedämpft werden. Der geschlossene Impellerrahmen verhindert Flattern bei hohen Drehzahlen, was zu besonders leisem Betrieb beiträgt. Der leistungsstarke Lüfter liefert hohe Luftdurchsätze und statischen Druck, eignet sich perfekt für Radiatoren und als Gehäuselüfter. Über den 4-Pin-PWM-Anschluss lässt sich die Drehzahl von 380 bis 2600 U/min steuern, inklusive Zero-RPM-Modus zum vollständigen Stillstand. Die Apex-Serie steht für erstklassige Materialien und innovative Technik, kombiniert mit brillanter aRGB-Beleuchtung und einem markanten Design, das sich in jeden PC-Build einfügt. Mehrere Lüfter können per Daisy Chain verbunden werden. Der 6-Pol-Motor mit Hydro Dynamic Bearing sorgt für leisen Lauf und hohe Langlebigkeit.

Alphacool Apex Stealth: High-End Metal Fan with Patented Decoupling The Alphacool Apex Stealth combines technical innovation with a timeless design. Thanks to its solid die-cast zinc frame and globally unique decoupling technology, this fan offers outstanding cooling performance with extremely quiet operation. Innovative Decoupling & Silence The heart of the Apex Stealth is the patent-pending decoupling system. The impeller, motor, and suspension are completely isolated from the frame. A special damping system effectively absorbs vibrations before they are transmitted to the case or radiators. Die-cast Zinc Frame: Provides maximum stability and a distinctive premium design. Closed Impeller: Prevents blade-tip fluttering at high speeds for optimized acoustics. HDB Bearing & 6-Pole Motor: Guarantees extreme smoothness and a long lifespan of 100,000h (MTBF). Versatile & Powerful With a control range of 200 to 2500 RPM and high static pressure, the Apex Stealth is the ideal choice for both case airflow and radiator cooling. Daisy-Chain: Multiple fans can be easily connected in series; cables hide neatly within the frame. Zero-RPM Control: Allows the fan to stop completely for silent office use. Technical Specifications ParameterValue Dimensions / Weight 140 x 140 x 25 mm / 395 g Speed 200 - 2500 RPM (PWM) Pressure / Airflow 3.45 mmH2O / 93.9 CFM Noise Level (max) 37.6 dB(A) Warranty 5 Years

Alphacool Apex Stealth: High-End Metal Fan (Chrome) with Patented Decoupling The Alphacool Apex Stealth combines technical innovation with a timeless design. Featuring a solid die-cast zinc frame in a sophisticated chrome finish and globally unique decoupling technology, this fan delivers outstanding cooling performance with extremely quiet operation. Innovative Decoupling & Silence The heart of the Apex Stealth is its patent-pending decoupling system. The impeller, motor, and suspension are completely isolated from the frame. A special damping system effectively absorbs vibrations before they are transmitted to the chassis or radiators. Chrome Die-cast Zinc Frame: Provides maximum stability along with a distinctive premium finish. Closed Impeller: Prevents blade-tip fluttering at high speeds for optimized acoustics. HDB Bearing & 6-Pole Motor: Guarantees extreme smoothness and a long lifespan of 100,000h (MTBF). Versatile & Powerful With a control range of 200 to 2500 RPM and high static pressure, the Apex Stealth is the ideal choice for both case airflow and radiator cooling. Daisy-Chain: Multiple fans can be easily connected in series; cables hide neatly within the frame corners. Zero-RPM Control: Allows the fan to stop completely for silent office use. Technical Specifications ParameterValue Dimensions / Weight 140 x 140 x 25 mm / 410 g Frame Material / Color Die-cast zinc / Chrome Speed 200 - 2500 RPM (PWM) Pressure / Airflow 3.45 mmH2O / 93.9 CFM Warranty 5 Years

Alphacool Apex Stealth: High-End Metal Fan (White) with Patented Decoupling The Alphacool Apex Stealth combines technical innovation with a timeless design. Thanks to its solid die-cast zinc frame in elegant white and globally unique decoupling technology, this fan offers outstanding cooling performance with extremely quiet operation. Innovative Decoupling & Silence The heart of the Apex Stealth is the patent-pending decoupling system. The impeller, motor, and suspension are completely isolated from the frame. A special damping system effectively absorbs vibrations before they are transmitted to the case or radiators. White Die-cast Zinc Frame: Provides maximum stability and a distinctive premium design for white-themed builds. Closed Impeller: Prevents blade-tip fluttering at high speeds for optimized acoustics. HDB Bearing & 6-Pole Motor: Guarantees extreme smoothness and a long lifespan of 100,000h (MTBF). Versatile & Powerful With a control range of 200 to 2500 RPM and high static pressure, the Apex Stealth is the ideal choice for both case airflow and radiator cooling. Daisy-Chain: Multiple fans can be easily connected in series; cables hide neatly within the frame. Zero-RPM Control: Allows the fan to stop completely for silent office use. Technical Specifications ParameterValue Dimensions / Weight 140 x 140 x 25 mm / 400 g Color / Material White / Die-cast Zinc Speed 200 - 2500 RPM (PWM) Pressure / Airflow 3.45 mmH2O / 93.9 CFM Warranty 5 Years

Case fan, all-metal housing, 120mm format, PWM-controlled, 0-3,000 RPM, 117.21 m³/h airflow

Alphacool Apex Stealth: High-End Metal Fan (Black) with aRGB & Patented Decoupling The Alphacool Apex Stealth combines technical innovation with a timeless, elegant design. Featuring a solid die-cast zinc frame in black, integrated aRGB lighting, and globally unique decoupling technology, this fan represents the pinnacle of performance with minimal noise. Innovative Decoupling & Silent Performance The heart of the Apex Stealth is its patent-pending decoupling system. The impeller, motor, and suspension are completely isolated from the metal frame. A special damping system effectively absorbs vibrations before they can be transmitted to the chassis or radiator. Black Die-cast Zinc Frame: Maximum mechanical stability combined with a discreet, high-quality finish. Closed Impeller: A special frame prevents blade-tip fluttering at high speeds for optimized acoustics. 6-Pole Motor & Sleeve Bearing: Guarantees extreme smoothness and a long lifespan (100,000h MTBF). Powerful All-Rounder with aRGB Accents With a wide control range from 300 to 2000 RPM and Zero-RPM control, the Apex Stealth covers all scenarios from silent office use to high-end workstations. Daisy-Chain System: PWM and aRGB cables can be easily connected in series and hidden neatly within the frame. Efficient Cooling: 2.36 mmH2O static pressure makes this fan ideal for radiator use. Customizable Lighting: Addressable LEDs perfectly showcase the striking, curved frame design. Technical Specifications ParameterValue Dimensions / Weight 140 x 140 x 25 mm / 350 g Speed 300 - 2000 RPM (PWM) Pressure / Airflow 2.36 mmH2O / 75.12 CFM Lighting Digitally addressable aRGB LEDs Warranty 5 Years

Alphacool Apex Stealth: High-End Metal Fan (Chrome) with aRGB & Patented Decoupling The Alphacool Apex Stealth combines technical innovation with a timeless, elegant design. Featuring a solid die-cast zinc frame in a brilliant chrome finish, integrated aRGB lighting, and globally unique decoupling technology, this fan represents the pinnacle of performance with minimal noise. Innovative Decoupling & Silent Performance The heart of the Apex Stealth is its patent-pending decoupling system. The impeller, motor, and suspension are completely isolated from the metal frame. A special damping system effectively absorbs vibrations before they can be transmitted to the chassis or radiator. Chrome Die-cast Zinc Frame: Maximum mechanical stability combined with a brilliant, high-quality finish. Closed Impeller: A special frame prevents blade-tip fluttering at high speeds for optimized acoustics. 6-Pole Motor & Sleeve Bearing: Guarantees extreme smoothness and a long lifespan (100,000h MTBF). Powerful All-Rounder with aRGB Accents With a wide control range from 300 to 2000 RPM and Zero-RPM control, the Apex Stealth covers all scenarios from silent office use to high-end workstations. Daisy-Chain System: PWM and aRGB cables can be easily connected in series and hidden neatly within the frame. Efficient Cooling: 2.36 mmH2O static pressure makes this fan ideal for radiator use. Customizable Lighting: Addressable LEDs perfectly showcase the striking, curved chrome frame design. Technical Specifications ParameterValue Dimensions / Weight 140 x 140 x 25 mm / 370 g Speed 300 - 2000 RPM (PWM) Pressure / Airflow 2.36 mmH2O / 75.12 CFM Lighting Digitally addressable aRGB LEDs Warranty 5 Years

The Alphacool Apex Thermal Grease is intended for all users who want to achieve the optimum performance with their system. With a high thermal conductivity, this electrically non-conductive thermal paste suitable for high contact pressures is clearly the favorite when performance and ease of application are required.ApplicationApex Thermal Grease can be optimally applied due to its high viscosity. For perfect application of the thermal paste, a plastic spatula (not included) or a comparable tool should be used.PropertiesAlphacool's Apex Thermal Grease has an extremely high thermal conductivity, making it one of the best performing thermal pastes on the market. Only liquid metal thermal pastes offer better thermal conductivity. The Apex Thermal Grease is delivered in a 20g container with screw cap. The amount of thermal paste is sufficient for several applications and can be stored in the container protected from drying out. In addition, Apex Thermal Grease is non-conductive and non-caustic. If a small amount of paste is spilled during application, damage to the hardware is highly unlikely.Range of usesAlphacool's high-performance thermal paste can be used to cool electronic components of all kinds. In addition to CPUs and graphics cards, the components of Playstation and Xbox game consoles can also be cooled and thus significantly improved in their performance and durability. Technical dataVolatilization Rate (24H@200°C)%less than 0.5Density (g/cc)3.2 (Test method ASTM D792)Viscosity (mPa.s)150~200*10³ (Test method ASTM D2196)Continuous Using Temperature (°C)-40°C to 120°CBreakdown Voltage (V/mil)250 (Test method ASTM D149)Thermal Impedance (°C in 2/W)0.1 +/- 0.01 (Test method ASTM D5470)Max. working pressure (psi)40ColorgrayQuantity20g

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)100 x 100 x 0,5mmThermal Conductivity (ASTM D5470)16.6 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)5×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)5 KV/mm (±10%)Density (ASTM D792)3.6 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colordark grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)100 x 100 x 1,5mmThermal Conductivity (ASTM D5470)16.6 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)5×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)5 KV/mm (±10%)Density (ASTM D792)3.6 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colordark grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)100 x 100 x 1mmThermal Conductivity (ASTM D5470)16.6 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)5×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)5 KV/mm (±10%)Density (ASTM D792)3.6 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colordark grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)120 x 20 x 0,5mmThermal Conductivity (ASTM D5470)16.6 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)5×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)5 KV/mm (±10%)Density (ASTM D792)3.6 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colordark grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)120 x 20 x 1,5mmThermal Conductivity (ASTM D5470)16.6 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)5×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)5 KV/mm (±10%)Density (ASTM D792)3.6 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colordark grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)120 x 20 x 1mmThermal Conductivity (ASTM D5470)16.6 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)5×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)5 KV/mm (±10%)Density (ASTM D792)3.6 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colordark grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)100 x 100 x 0,5mmThermal Conductivity (ASTM D5470)17.8 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)6×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)4 KV/mm (±10%)Density (ASTM D792)3.5 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorlight grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)100 x 100 x 1,5mmThermal Conductivity (ASTM D5470)17.8 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)6×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)4 KV/mm (±10%)Density (ASTM D792)3.5 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorlight grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)100 x 100 x 1mmThermal Conductivity (ASTM D5470)17.8 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)6×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)4 KV/mm (±10%)Density (ASTM D792)3.5 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorlight grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)120 x 20 x 0,5mmThermal Conductivity (ASTM D5470)17.8 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)6×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)4 KV/mm (±10%)Density (ASTM D792)3.5 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorlight grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)120 x 20 x 1,5mmThermal Conductivity (ASTM D5470)17.8 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)6×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)4 KV/mm (±10%)Density (ASTM D792)3.5 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorlight grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)120 x 20 x 1mmThermal Conductivity (ASTM D5470)17.8 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)6×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)4 KV/mm (±10%)Density (ASTM D792)3.5 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorlight grey

Alphacool Apex Thermal Putty – The Flexible High-End Alternative to Thermal Pads Alphacool Apex Thermal Putty is a high-performance thermal compound specifically engineered for cooling and protecting sensitive electronic components. As a non-curing, electrically non-conductive silicone gel, it provides the perfect solution for reliably bridging gaps and tolerances between heat sinks and hardware. Why Choose Apex Thermal Putty? Maximum Flexibility: Thanks to its gel-like consistency, the putty adapts perfectly to varying gap heights under slight pressure – ideal for memory chips (VRAM) and voltage regulators. Mechanical Protection: Unlike rigid pads, mechanical pressure on components is minimized, effectively preventing damage to sensitive hardware. Low Thermal Resistance: The optimized formula allows for an extremely thin Bond Line Thickness (BLT), significantly improving heat dissipation compared to conventional solutions. Long-Term Stability: High vertical stability ensures the material won't sag, dry out, or crack. Adjacent components remain clean and protected. Technical Highlights: Electrically Non-Conductive: No risk of short circuits when in contact with traces or components. Form-Stable: Stays exactly where applied, even at high temperatures and in vertical mounting positions. Applications: Perfect for modern graphics cards, consoles, and industrial applications with high thermal demands.

Alphacool Apex Thermal Putty – The Flexible High-End Alternative to Thermal Pads Alphacool Apex Thermal Putty is a high-performance thermal compound specifically engineered for cooling and protecting sensitive electronic components. As a non-curing, electrically non-conductive silicone gel, it provides the perfect solution for reliably bridging gaps and tolerances between heat sinks and hardware. Why Choose Apex Thermal Putty? Maximum Flexibility: Thanks to its gel-like consistency, the putty adapts perfectly to varying gap heights under slight pressure – ideal for memory chips (VRAM) and voltage regulators. Mechanical Protection: Unlike rigid pads, mechanical pressure on components is minimized, effectively preventing damage to sensitive hardware. Low Thermal Resistance: The optimized formula allows for an extremely thin Bond Line Thickness (BLT), significantly improving heat dissipation compared to conventional solutions. Long-Term Stability: High vertical stability ensures the material won't sag, dry out, or crack. Adjacent components remain clean and protected. Technical Highlights: Electrically Non-Conductive: No risk of short circuits when in contact with traces or components. Form-Stable: Stays exactly where applied, even at high temperatures and in vertical mounting positions. Applications: Perfect for modern graphics cards, consoles, and industrial applications with high thermal demands.

Splitter cable for ARGB accessories (3-pin / 5 V), 30 cm long cable, connection for up to two ARGB elements, compatible with various manufacturers and motherboards.

Sleeved extension cable for 3-pin ARGB, 15 cm length, with socket and plug.

Sleeved extension cable for 3-Pin ARGB, 30 cm length, with socket and plug.

The Alphacool Y-Splitter aRGB 3-Pin to 4x 3-Pin 15cm cable in black is designed for ARGB accessories (3-Pin / 5 V). This 15 cm long cable allows you to connect up to four ARGB elements, making it ideal for customizing your PC's lighting setup. It is compatible with various manufacturers and motherboards, ensuring versatile use. With a net weight of 0.021 kg, it is a lightweight and efficient solution for your ARGB needs.

The Alphacool Aurora Flexlight RGBW-LEDs are the ideal solution for illuminating your PC, especially for modding purposes. RGBW LEDs surpass standard RGB LEDs in both color and brightness. Of course, RGBW LED strips can also be used to light up various other areas in your home, such as creating mood lighting in the living room, under-bed lighting in the bedroom, or illuminating cabinets.

Highlights super easy installation 15 RGB LEDs for perfect lighting compatible with all standard RGB controllers intended for Eisblock XPX satin or clear CPU cooler The Alphacool XPX RGB frame is intended for users of the Eisblock XPX CPU cooler who are looking for the perfect lighting for their cooler. The RGB frame simply slides over the Eisblock XPX cooler and is then connected to the RGB controller. With an impressive 15 RGB LEDs evenly distributed over the XPX Eisblock CPU cooler, perfect lighting is guaranteed. The RGB controller lets you change not only the colours, but also add colour effects like gradients, blinking, slow colour changes, and much more. Many controllers also include a dimmer function. The Alphacool XPX RGB frame leaves nothing to be desired. With the 4Pin 12V RGB plug, all Alphacool RGB products are compatible with the current RGB-sync technologies of all prominent mainboard manufacturers (ASUS, AROCK, MSI, and GIGABYTE). Technical Details Dimensions: 75 x 75 x 17mm Cable length: 40cm power connection: RGB male material: POM, soft touch surface number of LEDs: 15 controlling: RGB Controller (available separately) Scope of Delivery 1x Alphacool Aurora XPX RGB frame - black Datasheet

Alphacools's fittings go new ways in looks, quality of manufacturing, colours and choice. The inner diameter of these fittings truly deserves the „high flow“ attribute! The first three colours, Chrome, Deep Black and Shiny Copper offer something for every taste. The product matching series are designed to look elegant in every system, highlighting the individual design of the computer. The limits are endless with these Alphacool fittings in combination with Alphacool tubing! With a new process during chromatising the surface finish is completely connected with the brass body, hence ensuring permanent intense colours and peeling of the chrome layer. The Alphacool name in blue lettering on some of the fittings additionally underlines the individuality of these items. Functionality of this connector:A bushing with two 1/4“ inner threads comes in handy for the extension of fittings or for connection of a component with an outer thread to a fitting. Technical specifications:Material: Brass, chromatizedColour: Deep Black Dimensions:Length: 22mmWidth: D17mm Extent of delivery:1 x Alphacool HF socket 2 x G1/4 inner thread - Deep Black This product has been reviewed for you:ModdingbaseXtremesystems (Engl.) (userreview)PT-reviews (Pt)

Replacement bottom for the Alphacool Cape Corp Coolplex expansion tank, designed for industrial applications with high pressures.Technical data:Material: POMDiameter: 50mmConnections: 3x G1/4"Scope of delivery:1x Alphacool Cape Coolplex Base POM 3 BarNote: O-ring not included!

Alphacool presents the Core 1, a new generation of CPU water cooling. The latest desktop processors are continuously becoming more powerful, but also produce more and more waste heat. The Core 1 reliably solves this problem with the help of its entirely new 3D-Jetplate, which is also used in industrial applications. The all-metal CPU water cooler not only impresses with its elegant appearance, but also features a new mounting system that simplifies installation.The best of new and oldAlphacool brings the best of both worlds together with the Core 1. In addition to the new 3D-Jetplate, Alphacool returns to its roots by using a proven cross-slot technique to distribute coolant evenly across the redesigned cooler base. Inside the cooler, O-rings ensure precise water flow for effective cooling. The Core 1's housing is machined from a high-quality brass block and features nickel-plated connectors. The cooler's copper base, also nickel-plated, has been enlarged to ensure full coverage of large CPUs. New Mounting SystemThe mounting system has also been revised. Compared to previous Alphacool models, it requires fewer screws. First, the pre-assembly of the backplate (Intel) is done with four spacers. After that, the thermal paste is applied to the CPU. Then, the matching mounting frame is put on the CPU cooler and fastened with four nuts on the spacers.Core DesignThe functional and elegant design is a key element of Alphacool's Core series. The nickel-plated connectors and the discreet contour line stand out from the high-quality brass housing. The rounded corners add the perfect touch to the overall look. The Core 1 is available in various color designs, as well as in discreetly illuminated aRGB Aurora models. Compatibility:AMD: AM4 / AM5Intel: LGA 1700 / LGA 1851 Technical dataDimensions (L x W x H)72 x 72 x 26,50mmMaterial coolernickel plated copperMaterial cooler topBrassMaterial threadsnickel plated BrassThreads2 x G1/4“Power supply Digital RGB3-Pin 5VQuantity digital aRGB LEDs18Fin thickness0,4mmFin distance0,4mmPressure tested0,8 barMax working temperature60°CWeight500gColorsilverWarranty: 5 years Warranty Terms

High-quality CPU block for water cooling, compatible with AMD and Intel CPUs, very compact, with RGB lighting

Alphacool presents the Core 1, a new generation of CPU water cooling. The latest desktop processors are continuously becoming more powerful, but also produce more and more waste heat. The Core 1 reliably solves this problem with the help of its entirely new 3D-Jetplate, which is also used in industrial applications. The all-metal CPU water cooler not only impresses with its elegant appearance, but also features a new mounting system that simplifies installation.The best of new and oldAlphacool brings the best of both worlds together with the Core 1. In addition to the new 3D-Jetplate, Alphacool returns to its roots by using a proven cross-slot technique to distribute coolant evenly across the redesigned cooler base. Inside the cooler, O-rings ensure precise water flow for effective cooling. The Core 1's housing is machined from a high-quality brass block and features nickel-plated connectors. The cooler's copper base, also nickel-plated, has been enlarged to ensure full coverage of large CPUs. New Mounting SystemThe mounting system has also been revised. Compared to previous Alphacool models, it requires fewer screws. First, the pre-assembly of the backplate (Intel) is done with four spacers. After that, the thermal paste is applied to the CPU. Then, the matching mounting frame is put on the CPU cooler and fastened with four nuts on the spacers.Core DesignThe functional and elegant design is a key element of Alphacool's Core series. The nickel-plated connectors and the discreet contour line stand out from the high-quality brass housing. The rounded corners add the perfect touch to the overall look. The Core 1 is available in various color designs, as well as in discreetly illuminated aRGB Aurora models. Compatibility:AMD: AM4 / AM5Intel: LGA 1700 / LGA 1851 Technical dataDimensions (L x W x H)72 x 72 x 26,50mmMaterial coolernickel plated copperMaterial cooler topBrassMaterial threadsnickel plated BrassThreads2 x G1/4“Power supply Digital aRGB3-Pin 5VQuantity digital aRGB LEDs18Fin thickness0,4mmFin distance0,4mmPressure tested0,8 barMax working temperature60°CWeight500gColorblackWarranty: 5 years Warranty Terms

Alphacool presents the Core 1, a new generation of CPU water cooling. The latest desktop processors are continuously becoming more powerful, but also produce more and more waste heat. The Core 1 reliably solves this problem with the help of its entirely new 3D-Jetplate, which is also used in industrial applications. The all-metal CPU water cooler not only impresses with its elegant appearance, but also features a new mounting system that simplifies installation.The best of new and oldAlphacool brings the best of both worlds together with the Core 1. In addition to the new 3D-Jetplate, Alphacool returns to its roots by using a proven cross-slot technique to distribute coolant evenly across the redesigned cooler base. Inside the cooler, O-rings ensure precise water flow for effective cooling. The Core 1's housing is machined from a high-quality brass block and features nickel-plated connectors. The cooler's copper base, also nickel-plated, has been enlarged to ensure full coverage of large CPUs. New Mounting SystemThe mounting system has also been revised. Compared to previous Alphacool models, it requires fewer screws. First, the pre-assembly of the backplate (Intel) is done with four spacers. After that, the thermal paste is applied to the CPU. Then, the matching mounting frame is put on the CPU cooler and fastened with four nuts on the spacers.Core DesignThe functional and elegant design is a key element of Alphacool's Core series. The nickel-plated connectors and the discreet contour line stand out from the high-quality housing with carbon cover. The rounded corners add the perfect touch to the overall look. The Core 1 is available in various color designs, as well as in discreetly illuminated aRGB Aurora models. Compatibility:AMD: AM4 / AM5Intel: LGA 1700 Technical dataDimensions (L x W x H)72 x 72 x 26,50mmMaterial coolernickel plated copperMaterial cooler topBrass, CarbonMaterial threadsnickel plated BrassThreads2 x G1/4“Power supply Digital aRGB3-Pin 5VQuantity digital aRGB LEDs18Fin thickness0,4mmFin distance0,4mmPressure tested0,8 barMax working temperature60°CWeight500gColorblack, carbonWarranty: 5 years Warranty Terms

Alphacool presents the Core 1, a new generation of CPU water cooling. The latest desktop processors are continuously becoming more powerful, but also produce more and more waste heat. The Core 1 reliably solves this problem with the help of its entirely new 3D-Jetplate, which is also used in industrial applications. The all-metal CPU water cooler not only impresses with its elegant appearance, but also features a new mounting system that simplifies installation.The best of new and oldAlphacool brings the best of both worlds together with the Core 1. In addition to the new 3D-Jetplate, Alphacool returns to its roots by using a proven cross-slot technique to distribute coolant evenly across the redesigned cooler base. Inside the cooler, O-rings ensure precise water flow for effective cooling. The Core 1's housing is machined from a high-quality brass block and features nickel-plated connectors. The cooler's copper base, also nickel-plated, has been enlarged to ensure full coverage of large CPUs. New Mounting SystemThe mounting system has also been revised. Compared to previous Alphacool models, it requires fewer screws. First, the pre-assembly of the backplate (Intel) is done with four spacers. After that, the thermal paste is applied to the CPU. Then, the matching mounting frame is put on the CPU cooler and fastened with four nuts on the spacers.Core DesignThe functional and elegant design is a key element of Alphacool's Core series. The nickel-plated connectors and the discreet contour line stand out from the high-quality housing with carbon cover. The rounded corners add the perfect touch to the overall look. The Core 1 is available in various color designs, as well as in discreetly illuminated aRGB Aurora models. Compatibility:AMD: AM4 / AM5Intel: LGA 1700 Technical dataDimensions (L x W x H)72 x 72 x 26,50mmMaterial coolernickel plated copperMaterial cooler topBrass, CarbonMaterial threadsnickel plated BrassThreads2 x G1/4“Fin thickness0,4mmFin distance0,4mmPressure tested0,8 barMax working temperature60°CWeight540gColorblack, carbonWarranty: 5 years Warranty Terms

The Alphacool Core 1 is a new generation of CPU water cooling and is suitable for Intel and AMD processors. The copper cooler base of the completely newly developed 3D Jetplate is nickel-plated and is also used in industry. Made entirely of metal, the CPU water cooler not only impresses with its elegant design, but also features a new mounting system that makes installation easier.