Arvutitark OÜ

With the Core 1 LT, Alphacool introduces the lightweight version of the proven Core 1 CPU water block. Encased in a polymer housing, the Core 1 LT utilizes the reliable combination of 3D jetplate and cross-slot technology, enabling it to efficiently dissipate the substantial heat generated by the latest desktop processors. Its elegant design allows it to integrate seamlessly into any water cooling setup. The new mounting system is included, making installation with Intel and AMD processors even easier.The best of new and oldAlphacool brings together the best of both worlds with the Core 1 water block series. Alongside the innovative 3D jetplate, Alphacool returns to its roots with proven cross-slot technology, evenly distributing coolant across the redesigned cooler base. High-quality O-rings inside the block ensure precise water flow for optimal cooling performance. The enlarged nickel-plated copper base guarantees full coverage for large CPUs.New Mounting SystemThe mounting system has been redesigned to require fewer screws compared to previous Alphacool models. Installation begins with pre-assembling the backplate (for Intel) using four spacers. Next, thermal paste is applied to the CPU. The appropriate mounting bracket is then placed on the CPU block and secured with four nuts on the spacers.Core DesignA functional yet elegant appearance is central to the Alphacool Core series, focusing on strong cooling performance at a fair price. Rounded corners provide the perfect finishing touch to its overall look. The Core 1 LT is available in both non-illuminated and transparent aRGB versions. Technical dataDimensions (L x W x H)71.80 x 71.80 x 28.05mmMaterial coolernickel plated copperMaterial cooler topacrylicMaterial threadsacrylicThreads2 x G1/4“Fin thickness0.4mmFin distance0.4mmPressure tested0.8 barMax working temperature60°CWeight250gColortransparent/blackWarranty: 5 years Warranty Terms

With the Core 1 LT, Alphacool presents the light version of the proven Core 1 CPU water cooler. Housed in a polymer casing, the Core 1 LT also uses the reliable combination of 3D jetplate and cross slot-technology. This enables it to effectively dissipate the enormous waste heat of the latest desktop processors. With its elegant design, it integrates seamlessly into any water cooling system. The new mounting system is also included and simplifies installation with Intel and AMD processors.The best of new and oldAlphacool combines the best of both worlds with the Core 1 water cooler series. In addition to the new 3D jetplate, Alphacool returns to its roots by distributing the coolant evenly across the redesigned cooler base using proven cross-slot technology. Inside the cooler, O-rings ensure a precise water flow and thus guarantee effective cooling. The nickel-plated copper base of the cooler has been enlarged to achieve full coverage of large CPUs. New Mounting SystemThe mounting system has also been revised. Compared to previous Alphacool models, it requires fewer screws. First, the pre-assembly of the backplate (Intel) is done with four spacers. After that, the thermal paste is applied to the CPU. Then, the matching mounting frame is put on the CPU cooler and fastened with four nuts on the spacers.Core DesignThe functional and elegant design is a central element of the Core series from Alphacool. Its focus is on cooling performance at a fair price. The rounded corners add the perfect touch to the overall look. The Core 1 LT is available in both non-illuminated and transparent aRGB versions. Compatibility:AMD: AM4 / AM5Intel: LGA 1700 Technical dataDimensions (L x W x H)71.80 x 71.80 x 28.05mmMaterial coolernickel plated copperMaterial cooler topacetalMaterial threadsacetalThreads2x G1/4“Fin thickness0.4mmFin distance0.4mmPressure tested0.8 barMax working temperature60°CWeight250gColorblackWarranty: 5 years Warranty Terms

Alphacool presents the Core 1, a new generation of CPU water cooling. The latest desktop processors are continuously becoming more powerful, but also produce more and more waste heat. The Core 1 reliably solves this problem with the help of its entirely new 3D-Jetplate, which is also used in industrial applications. The all-metal CPU water cooler not only impresses with its elegant appearance, but also features a new mounting system that simplifies installation.The best of new and oldAlphacool brings the best of both worlds together with the Core 1. In addition to the new 3D-Jetplate, Alphacool returns to its roots by using a proven cross-slot technique to distribute coolant evenly across the redesigned cooler base. Inside the cooler, O-rings ensure precise water flow for effective cooling. The Core 1's housing is machined from a high-quality brass block and features nickel-plated connectors. The cooler's copper base, also nickel-plated, has been enlarged to ensure full coverage of large CPUs. New Mounting SystemThe mounting system has also been revised. Compared to previous Alphacool models, it requires fewer screws. First, the pre-assembly of the backplate (Intel) is done with four spacers. After that, the thermal paste is applied to the CPU. Then, the matching mounting frame is put on the CPU cooler and fastened with four nuts on the spacers.Core DesignThe functional and elegant design is a key element of Alphacool's Core series. The nickel-plated connectors and the discreet contour line stand out from the high-quality brass housing. The rounded corners add the perfect touch to the overall look. The Core 1 is available in various color designs, as well as in discreetly illuminated aRGB Aurora models. Compatibility:AMD: AM4 / AM5Intel: LGA 1700 / LGA 1851 Technical dataDimensions (L x W x H)72 x 72 x 26,50mmMaterial Coolernickel plated copperMaterial cooler topBrassMaterial threadsnickel plated BrassThreads2 x G1/4“Fin thickness0,4mmFin distance0,4mmPressure tested0,8 barMax working temperature60°CWeight540gColorsilverWarranty: 5 years Warranty Terms

Alphacool presents the Core 1, a new generation of CPU water cooling. The latest desktop processors are continuously becoming more powerful, but also produce more and more waste heat. The Core 1 reliably solves this problem with the help of its entirely new 3D-Jetplate, which is also used in industrial applications. The all-metal CPU water cooler not only impresses with its elegant appearance, but also features a new mounting system that simplifies installation.The best of old and newAlphacool brings the best of both worlds together with the Core 1. In addition to the new 3D-Jetplate, Alphacool returns to its roots by using a proven cross-slot technique to distribute coolant evenly across the redesigned cooler base. Inside the cooler, O-rings ensure precise water flow for effective cooling. The Core 1's housing is machined from a high-quality brass block and features nickel-plated connectors. The cooler's copper base, also nickel-plated, has been enlarged to ensure full coverage of large CPUs. New Mounting SystemThe mounting system has also been revised. Compared to previous Alphacool models, it requires fewer screws. First, the pre-assembly of the backplate (Intel) is done with four spacers. After that, the thermal paste is applied to the CPU. Then, the matching mounting frame is put on the CPU cooler and fastened with four nuts on the spacers.Core DesignThe functional and elegant design is a key element of Alphacool's Core series. The nickel-plated connectors and the discreet contour line stand out from the high-quality brass housing. The rounded corners add the perfect touch to the overall look. The Core 1 is available in various color designs, as well as in discreetly illuminated aRGB Aurora models. Compatibility:AMD: AM4 / AM5Intel: LGA 1700 / LGA 1851 Technical dataDimensions (L x W x H)72 x 72 x 26,50mmMaterial Coolernickel plated copperMaterial cooler topBrassMaterial threadsnickel plated BrassThreads2 x G1/4“Fin thickness0,4mmFin distance0,4mmPressure tested0,8 barMax working temperature60°CWeight540gColorwhiteWarranty: 5 years Warranty Terms

The Alphacool Core reservoir has an integrated pump top for powerful D5 pumps and comes with a VPP655 PWM pump. The tube of the reservoir is made of acrylic, the D5/VPP pump top and the lid of acetal. The combination of these two materials gives the expansion tank a discreet appearance. The wow effect is provided by 12 digitally addressable RGB LEDs in the pump top and the Lighttower water effect inside the acrylic tube.What's new?Compared to the previous Eisbecher models, the acrylic tube of the Core reservoir has an external thread. This provides more stability and safety when connecting the lid and pump top to the tube. Also new is the integrated digital aRGB lighting. 12 digitally addressable RGB LEDs in the pump top are included in the scope of delivery of the Core reservoir and no longer have to be purchased separately. Extensive mounting optionsMounting option 1:Stands are included in the scope of delivery, which, among other things, allow the expansion tank to be mounted on the bottom of the enclosure. Mounting option 2:Included in the scope of delivery are 120mm/140mm mounting frames, which can be used to mount the Core expansion tank as desired on free fan spaces, radiators or on the fans on radiators.Digitally addressable RGB lighting12 digitally addressable RGB LEDs illuminate the aycryl tube of the reservoir. They are mounted in a ring at the lower end of the tube in the transition to the pump top and provide brilliant illumination of the entire expansion tank. In combination with the Lighttower water effect, a very special ambience is achieved. The digital aRGB LED lighting is connected via a JST 3-pin connector and can be controlled with a digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360) or a digital RGB capable mainboard.Lighttower water effectA special water effect is created in the core reservoir via the riser tubes. If you do not fill the reservoir beyond the top edge of the riser tube, you get a kind of fountain effect. In this case, the water is pushed out the sides of the riser tube and splashed against the glass tube. Depending on the flow of the circuit, the effect is stronger or weaker. The effect can be placed at the lower or upper inlet using the riser tubes included in the delivery.PumpThis pump is ideal for PC and other electronics water cooling. The DC pump is equipped with an electronically commutated spherical motor. In a pump with a spherical motor the only moving part is a spherically shaped rotor which in this pump is held in place by a bearing ball made of ultra-hard and wear-resistant ceramic. The spherical bearing of the rotor offers many advantages: For example an increase of bearing play is impossible due to the design, allowing the pump to run quietly and smoothly over its whole lifespan. A separate magnetic shielding of the pump is not needed. Technical dataL x W x H131 x 76,5 x 76,5 mmPump compatibilityD5Capacity200 mlMaterial Pump top & coveracetalMaterial tubeacrylicConnection3x G1/4“ internal threadMaximum working temperature60 °CPressure tested0,8 BarQuantity of digital aRGB LEDs12Power digital aRGB LEDs5VPower connector digital aRGB LEDs3-pin JST (male & female switch)Weight504 gColorblackTechnical data VPP655 PWMDimensions (L x W x H)65 x 65 x 57mmMaterial pumpSynthetic materialMaterial axleceramicsConnections4 Pin MolexRotational speed800-4800 RPMOperating voltage8-24V DCPower consumption23WMaximum pumping head3,7mMax flow1000l/hMax working temperature60°CColorblack

The Alphacool Core reservoir has an integrated pump top for powerful D5 pumps and comes with a VPP Apex pump. The tube of the reservoir is made of acrylic, the D5/VPP pump top and the lid of acetal. The combination of these two materials gives the expansion tank a discreet appearance. The wow effect is provided by 12 digitally addressable RGB LEDs in the pump top and the Lighttower water effect inside the acrylic tube.What's new?Compared to the previous Eisbecher models, the acrylic tube of the Core reservoir has an external thread. This provides more stability and safety when connecting the lid and pump top to the tube. Also new is the integrated digital aRGB lighting. 12 digitally addressable RGB LEDs in the pump top are included in the scope of delivery of the Core reservoir and no longer have to be purchased separately. Extensive mounting optionsMounting option 1:Stands are included in the scope of delivery, which, among other things, allow the expansion tank to be mounted on the bottom of the enclosure. Mounting option 2:Included in the scope of delivery are 120mm/140mm mounting frames, which can be used to mount the Core expansion tank as desired on free fan spaces, radiators or on the fans on radiators.Digitally addressable RGB lighting12 digitally addressable RGB LEDs illuminate the aycryl tube of the reservoir. They are mounted in a ring at the lower end of the tube in the transition to the pump top and provide brilliant illumination of the entire expansion tank. In combination with the Lighttower water effect, a very special ambience is achieved. The digital aRGB LED lighting is connected via a JST 3-pin connector and can be controlled with a digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360) or a digital RGB capable mainboard.Lighttower water effectA special water effect is created in the core reservoir via the riser tubes. If you do not fill the reservoir beyond the top edge of the riser tube, you get a kind of fountain effect. In this case, the water is pushed out the sides of the riser tube and splashed against the glass tube. Depending on the flow of the circuit, the effect is stronger or weaker. The effect can be placed at the lower or upper inlet using the riser tubes included in the delivery.Pump compatibilityThe Alphacool Core expansion tank has an integrated pump top and is compatible with all original D5 pumps as well as all Alphacool VPP pumps. The pump retaining ring, a pump O-ring and all screws are included in the scope of delivery.PumpThe VPP Apex pump does without a spherical bearing and uses a ceramic shaft. The motor's coils have been moved from the inside to the outside. These changes have the effect that the pump is fundamentally more stable and smoother running, and any vibrations that arise have been significantlyreduced. Another positive side effect is that power consumption has been almost halved as a result. Compared to Alphacool's Eispumpe, the power is not supplied via a 4-pin Molex connector. Instead, the Apex VPP pump is connected to the power supply using a SATA connector. The Apex VPP pump has a 4-pin fan connector that connects to the motherboard or to an external controller. This allows you to control the speed range of the pump via PWM and read out the RPM signal. Technical dataL x W x H131 x 76,5 x 76,5 mmPump compatibilityD5Capacity200 mlMaterial Pump top & coveracetalMaterial tubeacrylicConnection3x G1/4“ internal threadMaximum working temperature60 °CPressure tested0,8 BarQuantity of digital aRGB LEDs12Power digital aRGB LEDs5VPower connector digital aRGB LEDs3-pin JST (male & female switch)Weight504 gColorblackTechnical data VPP ApexDimensions (L x W x H)65 x 65 x 41mmMaterial pumpsynthetic materialMaterial pump coveraluminiumMaterial axleceramicsConnections4-Pin PWM | SATARotational speed2500 - 4500 RPMCable lenghts4-Pin PWM - 48cm | SATA - 48cmOperating voltage8-13V DC / 14W IP32Starting voltage12V DCMaximum pumping head4,25 mMax flow340 l/hMax working temperature60 °CNet weight276 gcolorblack

Umfangreicher Hub/Splitter von Alphacool, mit 10x PWM-Lüfteranschlüssen (4-Pin), Stromversorgung per SATA, Signalsteuerung per Mainboard

Alphacool's Core 120mm is a quiet and efficient fan with a wide control range up to 2500 rpm. The PWM controllable fan is not only suitable as a fan on CPU coolers or radiators. Due to its excellent performance values (throughput & static pressure), it can also be used as a case fan. The hydraulically mounted fan axis is smooth running and enables a long service life as well as quiet operation. If you are looking for a powerful fan without aRGB illumination, you will find it in Alpacool's Core 120mm model!ConnectionsThe fan is controlled via a 4-pin PWM connector. The cable is 40cm long. This allows the fan to be connected directly to the motherboard or a dedicated controller without the use of additional adapter cables or extensions.Control rangeThe fan can be controlled from 0 to 2500 rpm via the 4-pin PWM connector. At maximum speed, it allows an airflow of 72.63 CFM combined with a high static pressure of 2.42 mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system or for ventilating a case. Technical dataDimension (L x W x H)120 x 120 x 25mmMaterialsynthetic material (PBT UL94V-0)Bearing Typehydraulic BearingRated VoltageDC 12VOperating VoltageDC 7-14VStart-up Voltage7VRated Current0.3 (Max: 0.4) ARated Power3.6 (Max: 4.8) WControl Range0 - 2500 rpm ±10%Max. Air Flow72.63 CFMMax. Static Pressure2.42 mm/H2ONoise level36.6 (Max: 37.8) dBALife Expectance50000 h at 25 degrees celciusConnection4-Pin PWMSpeed Control Modevia PWMOperating Temperature-10~+55 degrees celciusOther FeaturesTachometer Output, Auto Start, Soft Start, Waterproof Level IP22Warranty: 3 years Warranty Terms

Alphacool's Core 120mm ist ein leiser und effizienter Lüfter mit einem großen Regelbereich bis zu 3000 U/min. Der über PWM-Signal steuerbare Lüfter eignet sich nicht nur als Lüfter auf CPU-Kühlern oder Radiatoren. Dank seiner hervorragenden Leistungswerte (Durchsatz & statischer Druck) kann er auch als Gehäuselüfter verwendet werden. Die doppelt gelagerte Lüfterachse ist laufruhig und ermöglicht eine lange Lebensdauer sowie einen leisen Betrieb. Wer auf der Suche nach einem leistungsstarken Lüfter ohne aRGB Beleuchtung ist, der wird bei Alpacool's Core 120mm Ausführung fündig. Der Lüfter wird über einen 4-Pin PWM Anschluss gesteuert. Das Kabel ist 40 cm lang. Damit kann der Lüfter ohne Verwendung weiterer Adapterkabel oder Verlängerungen direkt an das Mainboard oder einem speziellen Controller angeschlossen werden.

Alphacool's Core 120mm is a quiet and efficient fan with a wide control range up to 4000 rpm. The PWM controllable fan is not only suitable as a fan on CPU coolers or radiators. Due to its excellent performance values (throughput & static pressure), it can also be used as a case fan. The double-bearing fan axis is smooth running and enables a long service life as well as quiet operation. If you are looking for a powerful fan without aRGB illumination, you will find it in Alpacool's Core 120mm model!ConnectionsThe fan is controlled via a 4-pin PWM connector. The cable is 40cm long. This allows the fan to be connected directly to the motherboard or a dedicated controller without the use of additional adapter cables or extensions.Control rangeThe fan can be controlled from 0 to 4000 rpm via the 4-pin PWM connector. At maximum speed, it allows an airflow of 119.8 CFM combined with a high static pressure of 12.67 mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system or for ventilating a case. Technical dataDimension (L x W x H)120 x 120 x 25mmMaterialsynthetic material (PBT UL94V-0)Bearing TypeTwo Ball BearingRated VoltageDC 12VOperating VoltageDC 7-14VStart-up Voltage7VRated Current0.53 (Max: 0.67) ARated Power6.36 (Max: 8.04) WRated Speed0 - 4000 rpm ±10%Max. Air Flow119.8 CFMMax. Static Pressure12.67 mm/H2ONoise level49.5 (Max: 51.5) dBALife Expectance70000 h at 40 degrees celciusConnection4-Pin PWMSpeed Control Modevia PWMOperating Temperature-10~+70 degrees celciusOther FeaturesTachometer Output, Auto Start, Soft Start, Waterproof Level IP22Warranty: 3 years Warranty Terms

The Alphacool Core Reservoir not only looks sleek with its aRGB lighting, but can also be used flexibly thanks to its compact size. The reservoir is made entirely of acrylic. The installation of a D5 or VPP pump is required for operation. Due to its compact design, the Core Reservior also fits into small cases.Core DesignA key element of Alphacool's Core Design series are the chrome-plated G1/4" connections made of brass. In the Core Reservoir, the connections are recessed rather than screwed into a thread, bypassing the problem of possible leaks due to cracking from the direct screwing of the connections into the acrylic. The connections are in two parts, fitted with an O-ring and counter each other when mounted in the acrylic. This not only ensures absolute sealing of each connection, but also allows for the clear and functional appearance of the Alphacool Core Design series.Easy installationWith the included Core Push Mounting kit, the Core Reservoir can be mounted on the case or on a radiator. The metal pins are attached to the radiator or case panel and the matching female sleeves are attached to the Reservoir (see manual). In the next installation step, the Reservoir is simply and tool-free pushed onto the pins. Alphacool's Push-Mounting allows for a secure fit of the reservoir on the case panel or on the radiator and allows for easy disassembly for maintenance or expansion projects.GamechangerThe Core Reservior is small and compact. This makes the reservoir ideal for custom water loops. An additional drain port is located on the side, allowing for easy and uncomplicated draining of the Reservoir.High-quality material selection & brilliant lightingAlphacool's Core Reservoir is made of high-quality acrylic glass, allowing for an unobstructed view of the coolant and brilliant illumination by the built-in digital addressable aRGB LEDs. The lighting can be controlled via a digital aRGB header on the motherboard or optionally through Alphacool's Aurora Eiscontrol aRGB controller (item number: 15360). Technical dataDimensions (L x W x H)120.00 x 125.00 x 45.00mmVolume (reservoir)approx. 65mlMaterialAcrylPump compatibilityD5/VPPThreads4x G1/4“ inner thread / 1x drain portMaximum working temperature60 °CPressure tested0.8 BarQuantity digital aRGB LEDs6Voltage digital aRGB LEDs5VPower connection digital aRGB LEDs3-Pin JST + 3-Pin 5VWeight660gColortransparentWarranty: 3 years Warranty Terms

The Alphacool Core Reservoir not only looks sleek with its aRGB lighting, but can also be used flexibly thanks to its compact size. The reservoir is made entirely of acrylic. The installation of a D5 or VPP pump is required for operation. Due to its compact design, the Core Reservior also fits into small cases.Core DesignA key element of Alphacool's Core Design series are the chrome-plated G1/4" connections made of brass. In the Core Reservoir, the connections are recessed rather than screwed into a thread, bypassing the problem of possible leaks due to cracking from the direct screwing of the connections into the acrylic. The connections are in two parts, fitted with an O-ring and counter each other when mounted in the acrylic. This not only ensures absolute sealing of each connection, but also allows for the clear and functional appearance of the Alphacool Core Design series.Easy installationWith the included Core Push Mounting kit, the Core Reservoir can be mounted on the case or on a radiator. The metal pins are attached to the radiator or case panel and the matching female sleeves are attached to the Reservoir (see manual). In the next installation step, the Reservoir is simply and tool-free pushed onto the pins. Alphacool's Push-Mounting allows for a secure fit of the reservoir on the case panel or on the radiator and allows for easy disassembly for maintenance or expansion projects.GamechangerThe Core Reservior is small and compact. This makes the reservoir ideal for custom water loops. An additional drain port is located on the side, allowing for easy and uncomplicated draining of the Reservoir.High-quality material selection & brilliant lightingAlphacool's Core Reservoir is made of high-quality acrylic glass, allowing for an unobstructed view of the coolant and brilliant illumination by the built-in digital addressable aRGB LEDs. The lighting can be controlled via a digital aRGB header on the motherboard or optionally through Alphacool's Aurora Eiscontrol aRGB controller (item number: 15360). Technical dataDimensions (L x W x H)120.00 x 125.00 x 78.00mmVolume (reservoir)approx. 65mlMaterialAcrylPump compatibilityD5/VPPThreads4x G1/4“ inner thread / 1x drain portMaximum working temperature60 °CPressure tested0.8 BarQuantity digital aRGB LEDs6Voltage digital aRGB LEDs5VPower connection digital aRGB LEDs3-Pin JST + 3-Pin 5VWeight940gColortransparentTechnical data pumpMaterial pumpsynthetic materialMaterial pump coveraluminiumMaterial axleceramicsConnections4-Pin PWM | SATARotational speed2500 - 4500 RPMCable lengths4-Pin PWM - 48cm | SATA - 48cmOperating voltage8-13V DC / 14W IP32Starting voltage12V DCMaximum pumping head4,25mMaximum flow rate340L/hMaximum working temperature60°CColorblackWarranty: 3 years Warranty Terms

Alphacool's Core 140mm is a quiet and efficient fan with a wide control range up to 2500 rpm. The PWM controllable fan is not only suitable as a fan on CPU coolers or radiators. Due to its excellent performance values (throughput & static pressure), it can also be used as a case fan. The double-bearing fan axis is smooth running and enables a long service life as well as quiet operation. If you are looking for a powerful fan without aRGB illumination, you will find it in Alpacool's Core 140mm model!ConnectionsThe fan is controlled via a 4-pin PWM connector. The cable is 40cm long. This allows the fan to be connected directly to the motherboard or a dedicated controller without the use of additional adapter cables or extensions.Control rangeThe fan can be controlled from 0 to 2500 rpm via the 4-pin PWM connector. At maximum speed, it allows an airflow of 115.56 CFM combined with a high static pressure of 3.96 mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system or for ventilating a case. Technical dataDimension (L x W x H)140 x 140 x 25mmMaterialsynthetic material (PBT UL94V-0)Bearing TypeTwo Ball BearingRated VoltageDC 12VOperating VoltageDC 7-14VStart-up Voltage7VRated Current0.4 (Max: 0.5) ARated Power4.8 (Max: 6.00) WRated Speed0 - 2500 rpm ±10%Max. Air Flow115.56 CFMMax. Static Pressure3.96 mm/H2ONoise level43.3 (Max: 45.0) dBALife Expectance70000 h at 40 degrees celciusConnection4-Pin PWMSpeed Control Modevia PWMOperating Temperature-10~+70 degrees celciusOther FeaturesTachometer Output, Auto Start, Soft Start, Waterproof Level IP22Warranty: 3 years Warranty Terms

Alphacool's Core 140mm is a quiet and efficient fan with a wide control range up to 3200 rpm. The PWM controllable fan is not only suitable as a fan on CPU coolers or radiators. Due to its excellent performance values (throughput & static pressure), it can also be used as a case fan. The double-bearing fan axis is smooth running and enables a long service life as well as quiet operation. If you are looking for a powerful fan without aRGB illumination, you will find it in Alphacool's Core 140mm model!ConnectionsThe fan is controlled via a 4-pin PWM connector. The cable is 40cm long. This allows the fan to be connected directly to the motherboard or a dedicated controller without the use of additional adapter cables or extensions.Control rangeThe fan can be controlled from 0 to 3200 rpm via the 4-pin PWM connector. At maximum speed, it allows an airflow of 153.9 CFM combined with a high static pressure of 6.99 mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system or for ventilating a case. Technical dataDimension (L x W x H)140 x 140 x 25mmMaterialsynthetic material (PBT UL94V-0)Bearing TypeTwo Ball BearingRated VoltageDC 12VOperating VoltageDC 7-14VStart-up Voltage7VRated Current0.66 (Max: 0.75) ARated Power7.92 (Max: 9.00) WRated Speed0 - 3200 rpm ±10%Max. Air Flow153.9 CFMMax. Static Pressure6.99 mm/H2ONoise level51.0 (Max: 53.0) dBALife Expectance70000 h at 40 degrees celciusConnection4-Pin PWMSpeed Control Modevia PWMOperating Temperature-10~+70 degrees celciusOther FeaturesTachometer Output, Auto Start, Soft Start, Waterproof Level IP22Warranty: 3 years Warranty Terms

The Alphacool Core Reservoir not only looks sleek with its aRGB lighting, but can also be used flexibly thanks to its compact size. The reservoir is made entirely of acrylic. The installation of a D5 or VPP pump is required for operation. Due to its compact design, the Core Reservior also fits into small cases.Core DesignA key element of Alphacool's Core Design series are the chrome-plated G1/4" connections made of brass. In the Core Reservoir, the connections are recessed rather than screwed into a thread, bypassing the problem of possible leaks due to cracking from the direct screwing of the connections into the acrylic. The connections are in two parts, fitted with an O-ring and counter each other when mounted in the acrylic. This not only ensures absolute sealing of each connection, but also allows for the clear and functional appearance of the Alphacool Core Design series.Easy installationWith the included Core Push Mounting kit, the Core Reservoir can be mounted on the case or on a radiator. The metal pins are attached to the radiator or case panel and the matching female sleeves are attached to the Reservoir (see manual). In the next installation step, the Reservoir is simply and tool-free pushed onto the pins. Alphacool's Push-Mounting allows for a secure fit of the reservoir on the case panel or on the radiator and allows for easy disassembly for maintenance or expansion projects.GamechangerThe Core Reservior is small and compact. This makes the reservoir ideal for custom water loops. An additional drain port is located on the side, allowing for easy and uncomplicated draining of the Reservoir.High-quality material selection & brilliant lightingAlphacool's Core Reservoir is made of high-quality acrylic glass, allowing for an unobstructed view of the coolant and brilliant illumination by the built-in digital addressable aRGB LEDs. The lighting can be controlled via a digital aRGB header on the motherboard or optionally through Alphacool's Aurora Eiscontrol aRGB controller (item number: 15360). Technical dataDimensions (L x W x H)140.00 x 145.00 x 62.00mmVolume (reservoir)approx. 130mlMaterialAcrylPump compatibilityD5/VPPThreads3x G1/4“ inner thread / 1x drain portMaximum working temperature60 °CPressure tested0.8 BarQuantity digital aRGB LEDs5Voltage digital aRGB LEDs5VPower connection digital aRGB LEDs3-Pin JST + 3-Pin 5VWeight840gColortransparentWarranty: 3 years Warranty Terms

The Alphacool Core Reservoir not only looks sleek with its aRGB lighting, but can also be used flexibly thanks to its compact size. The reservoir is made entirely of acrylic. The installation of a D5 or VPP pump is required for operation. Due to its compact design, the Core Reservior also fits into small cases.Core DesignA key element of Alphacool's Core Design series are the chrome-plated G1/4" connections made of brass. In the Core Reservoir, the connections are recessed rather than screwed into a thread, bypassing the problem of possible leaks due to cracking from the direct screwing of the connections into the acrylic. The connections are in two parts, fitted with an O-ring and counter each other when mounted in the acrylic. This not only ensures absolute sealing of each connection, but also allows for the clear and functional appearance of the Alphacool Core Design series.Easy installationWith the included Core Push Mounting kit, the Core Reservoir can be mounted on the case or on a radiator. The metal pins are attached to the radiator or case panel and the matching female sleeves are attached to the Reservoir (see manual). In the next installation step, the Reservoir is simply and tool-free pushed onto the pins. Alphacool's Push-Mounting allows for a secure fit of the reservoir on the case panel or on the radiator and allows for easy disassembly for maintenance or expansion projects.GamechangerThe Core Reservior is small and compact. This makes the reservoir ideal for custom water loops. An additional drain port is located on the side, allowing for easy and uncomplicated draining of the Reservoir.High-quality material selection & brilliant lightingAlphacool's Core Reservoir is made of high-quality acrylic glass, allowing for an unobstructed view of the coolant and brilliant illumination by the built-in digital addressable aRGB LEDs. The lighting can be controlled via a digital aRGB header on the motherboard or optionally through Alphacool's Aurora Eiscontrol aRGB controller (item number: 15360). Technical dataDimensions (L x W x H)140.00 x 145.00 x 62.00mmVolume (reservoir)approx. 130mlMaterialAcrylPump compatibilityD5/VPPThreads3x G1/4“ inner thread / 1x drain portMaximum working temperature60 °CPressure tested0.8 BarQuantity digital aRGB LEDs5Voltage digital aRGB LEDs5VPower connection digital aRGB LEDs3-Pin JST + 3-Pin 5VWeight1120gColortransparentTechnical data pumpMaterial pumpsynthetic materialMaterial pump coveraluminiumMaterial axleceramicsConnections4-Pin PWM | SATARotational speed2500 - 4500 RPMCable lengths4-Pin PWM - 48cm | SATA - 48cmOperating voltage8-13V DC / 14W IP32Starting voltage12V DCMaximum pumping head4,25mMaximum flow rate340L/hMaximum working temperature60°CColorblackWarranty: 3 years Warranty Terms

The Alphacool Core reservoir has an integrated pump top for powerful D5 pumps and comes with a VPP655 PWM pump. The tube of the reservoir is made of acrylic, the D5/VPP pump top and the lid of acetal. The combination of these two materials gives the expansion tank a discreet appearance. The wow effect is provided by 12 digitally addressable RGB LEDs in the pump top and the Lighttower water effect inside the acrylic tube.What's new?Compared to the previous Eisbecher models, the acrylic tube of the Core reservoir has an external thread. This provides more stability and safety when connecting the lid and pump top to the tube. Also new is the integrated digital aRGB lighting. 12 digitally addressable RGB LEDs in the pump top are included in the scope of delivery of the Core reservoir and no longer have to be purchased separately. Extensive mounting optionsMounting option 1:Stands are included in the scope of delivery, which, among other things, allow the expansion tank to be mounted on the bottom of the enclosure. Mounting option 2:Included in the scope of delivery are 120mm/140mm mounting frames, which can be used to mount the Core expansion tank as desired on free fan spaces, radiators or on the fans on radiators.Digitally addressable RGB lighting12 digitally addressable RGB LEDs illuminate the aycryl tube of the reservoir. They are mounted in a ring at the lower end of the tube in the transition to the pump top and provide brilliant illumination of the entire expansion tank. In combination with the Lighttower water effect, a very special ambience is achieved. The digital aRGB LED lighting is connected via a JST 3-pin connector and can be controlled with a digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360) or a digital RGB capable mainboard.Lighttower water effectA special water effect is created in the core reservoir via the riser tubes. If you do not fill the reservoir beyond the top edge of the riser tube, you get a kind of fountain effect. In this case, the water is pushed out the sides of the riser tube and splashed against the glass tube. Depending on the flow of the circuit, the effect is stronger or weaker. The effect can be placed at the lower or upper inlet using the riser tubes included in the delivery.PumpThis pump is ideal for PC and other electronics water cooling. The DC pump is equipped with an electronically commutated spherical motor. In a pump with a spherical motor the only moving part is a spherically shaped rotor which in this pump is held in place by a bearing ball made of ultra-hard and wear-resistant ceramic. The spherical bearing of the rotor offers many advantages: For example an increase of bearing play is impossible due to the design, allowing the pump to run quietly and smoothly over its whole lifespan. A separate magnetic shielding of the pump is not needed. Technical dataL x W x H251 x 76,5 x 76,5 mmPump compatibilityD5Capacity400 mlMaterial Pump top & coveracetalMaterial tubeacrylicConnection3x G1/4“ internal threadMaximum working temperature60 °CPressure tested0,8 BarQuantity of digital aRGB LEDs12Power digital aRGB LEDs5VPower connector digital aRGB LEDs3-pin JST (male & female switch)Weight621 gColorblackTechnical data VPP655 PWMDimensions (L x W x H)65 x 65 x 57mmMaterial pumpsynthetic materialMaterial axleceramicsConnections4 Pin MolexRotational speed800-4800 RPMOperating voltage8-24V DCPower consumption23WMaximum pumping head3,7mMax flow1000l/hMax working temperature60 °Ccolorblack

The Alphacool Core reservoir has an integrated pump top for powerful D5 pumps and comes with a VPP Apex pump. The tube of the reservoir is made of acrylic, the D5/VPP pump top and the lid of acetal. The combination of these two materials gives the expansion tank a discreet appearance. The wow effect is provided by 12 digitally addressable RGB LEDs in the pump top and the Lighttower water effect inside the acrylic tube.What's new?Compared to the previous Eisbecher models, the acrylic tube of the Core reservoir has an external thread. This provides more stability and safety when connecting the lid and pump top to the tube. Also new is the integrated digital aRGB lighting. 12 digitally addressable RGB LEDs in the pump top are included in the scope of delivery of the Core reservoir and no longer have to be purchased separately. Extensive mounting optionsMounting option 1:Stands are included in the scope of delivery, which, among other things, allow the expansion tank to be mounted on the bottom of the enclosure. Mounting option 2:Included in the scope of delivery are 120mm/140mm mounting frames, which can be used to mount the Core expansion tank as desired on free fan spaces, radiators or on the fans on radiators.Digitally addressable RGB lighting12 digitally addressable RGB LEDs illuminate the aycryl tube of the reservoir. They are mounted in a ring at the lower end of the tube in the transition to the pump top and provide brilliant illumination of the entire expansion tank. In combination with the Lighttower water effect, a very special ambience is achieved. The digital aRGB LED lighting is connected via a JST 3-pin connector and can be controlled with a digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360) or a digital RGB capable mainboard.Lighttower water effectA special water effect is created in the core reservoir via the riser tubes. If you do not fill the reservoir beyond the top edge of the riser tube, you get a kind of fountain effect. In this case, the water is pushed out the sides of the riser tube and splashed against the glass tube. Depending on the flow of the circuit, the effect is stronger or weaker. The effect can be placed at the lower or upper inlet using the riser tubes included in the delivery.Pump compatibilityThe Alphacool Core expansion tank has an integrated pump top and is compatible with all original D5 pumps as well as all Alphacool VPP pumps. The pump retaining ring, a pump O-ring and all screws are included in the scope of delivery.PumpThe VPP Apex pump does without a spherical bearing and uses a ceramic shaft. The motor's coils have been moved from the inside to the outside. These changes have the effect that the pump is fundamentally more stable and smoother running, and any vibrations that arise have been significantlyreduced. Another positive side effect is that power consumption has been almost halved as a result. Compared to Alphacool's Eispumpe, the power is not supplied via a 4-pin Molex connector. Instead, the Apex VPP pump is connected to the power supply using a SATA connector. The Apex VPP pump has a 4-pin fan connector that connects to the motherboard or to an external controller. This allows you to control the speed range of the pump via PWM and read out the RPM signal. Technical dataL x W x H251 x 76,5 x 76,5 mmPump compatibilityD5Capacity400 mlMaterial Pump top & coveracetalMaterial tubeacrylicConnection3x G1/4“ internal threadMaximum working temperature60 °CPressure tested0,8 BarQuantity of digital aRGB LEDs12Power digital aRGB LEDs5VPower connector digital aRGB LEDs3-pin JST (male & female switch)Weight621 gColorblackTechnical data VPP ApexDimensions (L x W x H)65 x 65 x 41mmMaterial pumpsynthetic materialMaterial pump coveraluminiumMaterial axleceramicsConnections4-Pin PWM | SATARotational speed2500 - 4500 RPMCable lenghts4-Pin PWM - 48cm | SATA - 48cmOperating voltage8-13V DC / 14W IP32Starting voltage12V DCMaximum pumping head4,25 mMax flow340 l/hMax working temperature60 °CNet weight276 gcolorblack

The Alphacool Core reservoir combines performance with design. The tube of the reservoir is made of acrylic, the D5/VPP pump top and the lid of acetal. The combination of these two materials gives the expansion tank a discreet appearance. The wow effect is provided by 12 digitally addressable RGB LEDs in the pump top and the Lighttower water effect inside the acrylic tube. What's new? Compared to the previous Eisbecher models, the acrylic tube of the Core reservoir has an external thread. This provides more stability and safety when connecting the lid and pump top to the tube. Also new is the integrated digital aRGB lighting. 12 digitally addressable RGB LEDs in the pump top are included in the scope of delivery of the Core reservoir and no longer have to be purchased separately. Extensive mounting options Mounting option 1: Stands are included in the scope of delivery, which, among other things, allow the expansion tank to be mounted on the bottom of the enclosure. Mounting option 2: Included in the scope of delivery are 120mm/140mm mounting frames, which can be used to mount the Core expansion tank as desired on free fan spaces, radiators or on the fans on radiators. Digitally addressable RGB lighting 12 digitally addressable RGB LEDs illuminate the aycryl tube of the reservoir. They are mounted in a ring at the lower end of the tube in the transition to the pump top and provide brilliant illumination of the entire expansion tank. In combination with the Lighttower water effect, a very special ambience is achieved. The digital aRGB LED lighting is connected via a JST 3-pin connector and can be controlled with a digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360) or a digital RGB capable mainboard. Lighttower water effect A special water effect is created in the core reservoir via the riser tubes. If you do not fill the reservoir beyond the top edge of the riser tube, you get a kind of fountain effect. In this case, the water is pushed out the sides of the riser tube and splashed against the glass tube. Depending on the flow of the circuit, the effect is stronger or weaker. The effect can be placed at the lower or upper inlet using the riser tubes included in the delivery. Pump compatibility The Alphacool Core expansion tank has an integrated pump top and is compatible with all original D5 pumps as well as all Alphacool VPP pumps. The pump retaining ring, a pump O-ring and all screws are included in the scope of delivery. Technical data L x W x H 251 x 76,5 x 76,5 mm Pump compatibility D5 Capacity 400 ml Material Pump top & cover acetal Material tube acrylic Connection 3x G1/4“ internal thread Maximum working temperature 60 °C Pressure tested 0,8 Bar Quantity of digital aRGB LEDs 12 Power digital aRGB LEDs 5V Power connector digital aRGB LEDs 3-pin JST (male & female switch) Weight 621 g Color black

Distroplate for water cooling systems, with mounting options for D5 and VPP pumps, integrated reservoir, easy to mount, integrated RGB lighting

Alphacool provides more flexibility when mounting Distro Plates. With the Universal Mounting Bracket, the Alphacool Distro Plate can be mounted at a 90° angle. Either on the radiator or directly on to the case. This expands the creative possibilities and increases customisability. Compatibility:Alphacool Core Distro Plate 240/280mmAlphacool Core Flat Reservoir 240/280mm Technical dataDimensions44,00 x 33,00mmMaterialMetalWeight170gColorblack

Distroplate for water cooling systems, with pre-installed VPP pump, easy to mount, integrated RGB lighting

Alphacool provides more flexibility when mounting Distro Plates. With the Universal Mounting Bracket, the Alphacool Distro Plate can be mounted at a 90° angle. Either on the radiator or directly on to the case. This expands the creative possibilities and increases customisability. Compatibility:Alphacool Core Distro Plate 240/280mmAlphacool Core Flat Reservoir 240/280mm Technical dataDimensions44,00 x 33,00mmMaterialMetalWeight260gColorblack

Umfangreicher Hub/Controller von Alphacool, mit 6x PWM-Lüfteranschlüssen (4-Pin), und 6x ARGB-Ports (3-Pin, 5VDG), Stromversorgung per SATA, Signalsteuerung per Mainboard

Alphacool Core 70 Tube – Real Glass Reservoir with Apex VPP Pump The Core 70 Tube Reservoir merges premium materials with a functional industrial design. The real glass cylinder ensures maximum chemical resistance and permanent clarity – a significant advantage over conventional acrylic tubes. Highlights at a Glance: Real Glass Cylinder: Scratch-resistant, durable, and crystal clear. Perfect for professional high-end builds. VPP Apex Performance: The pre-installed pump with a ceramic shaft operates with minimal vibration. Precision control via 4-pin PWM, powered by SATA. Optimized Workflow: The included Core design tube-top provides additional fill/drain ports, making filling and bleeding the loop much easier. Core Design Elements: Chrome-plated brass fittings offer a premium look and superior thread stability. Flexible Mounting: The rotatable bracket allows for highly customizable positioning and alignment within the chassis. Integrated Lighting: 13 digital aRGB LEDs provide uniform illumination for the entire glass cylinder. Technical Specifications: Dimensions (L x W x H): 293 x 74 x 97 mm Capacity: 494 ml Materials: Glass (Tube), Acetal (Top/Cap), Brass (Fittings) Ports: 2x G1/4“ (Tube-top provides 2 additional ports) Pump: Apex VPP (4.25m head, 340L/h max.) Important Note: Use only with clear, transparent coolants. Particles in pastel fluids can damage the pump and void the 3-year warranty.

Intel-Sockel LGA 115X/1200 und 1700, für Alphacool XPX/Eisbaer CPU-Wasserkühler, einfache Installation und hohe Kompatibilität

Distroplate für Wasserkühlungen, mit VPP Pumpe, integriertes Reservoir, einfach montierbar, integrierte RGB-Beleuchtung

Distroplates für Wasserkühlungen, mit Montagemöglichkeit für D5-Pumpen, integriertes Reservoir, einfach montierbar, integrierte RGB-Beleuchtung

Distroplate für Wasserkühlungen, mit integrierter VPP-Pumpe, für das LIAN LI O11 Dynamic Evo/XL, adressierbare RGB-Beleuchtung

Alphacool's double-sided adhesive Core thermal pad can be used to cool electronic components of all kinds where it is important to effectively dissipate waste heat. This significantly improves the performance and durability of the components. The assembly is significantly simplified by the material-related tackiness.Flexible and PowerfulDue to its material composition, the thermal conductive pad is reliable and powerful. With its low thickness, it offers a wide range of application possibilities. It can be flexibly cut to size for individual needs. The adhesive nature allows effortless mounting of electrical components such as DDR modules, motherboard components or power supplies. Technical dataDimensions (L x W x H)50 x 50 x 0.25mmThermal Conductivity (ASTM D5470)1 W/mK ±10%Thickness (ASTM D374)0.25 mmReinforcement CarrierFiberglass meshContinuous Working Temperature-30~+120 °CShort time use temperature (30sec)180 °CDensity (ASTM D792)1.2 g/cm³Holding Power 1000g@25° Cusing 1 in² (PSTC-7)>3000 min180° Peeling Strength (aluminum) (PSTC-101)>16 N / 25mmDielectric Breakdown Voltage (AC) (ASTM D149)3 KV ±10%Thermal Impedance @10psi (ASTM D5470)1.26 C-in² / WThermal Impedance @30psi (ASTM D5470)1.06 C-in² / WThermal Impedance @50psi (ASTM D5470)1.05 C-in² / WColorwhite

With this funnel, working on your own water cooling system is really fun. Simplify filling the system with this high-quality funnel. Never again add water next to the expansion tank! Technical data L x W x H 10 x 6 x 6 cm Diameter 6 cm Weight 9 g Material plastics Download PDF Datasheet: Alphacool Core filling funnel

Distroplate for water cooling systems, with pre-mounted VPP pump, easy to install, integrated RGB lighting

Alphacool's Core product series is characterized by high quality, outstanding performance and the uniform and functional design language.The copper cooler which, like the end terminal, is milled from a single piece of copper and is the core of this cooler. The fine workmanship, paired with the hard and resistant chrome plating covering the entire copper cooler, meet the highest quality standards. The chrome-plated brass G1/4" threads integrated on both sides stand out visually from the terminal. They are a central feature of the new design language that will be evident in all products in the Core series.The aluminum backplate adapted to the design, together with the terminal, makes up the entire unit and enhances the back of the cooler with a clean and homogeneous look. The lighting consists of digitally addressable RGB LEDs, which illuminate the entire cooler evenly and effectively.The technical advancements can be seen in the water supply to the jet plate as well as in the optimization of the jet plate itself. The jet plate has been completely redesigned based on many simulations and practical tests in cooperation with board partners. The fin thickness and spacing have been enhanced, the cooling surface has been increased and the water flow to the core components with the greatest heat output has been optimized. The enclosed special soft thermal pads with up to 7 W/mK adapt perfectly to even the smallest tolerances. Compatibility:- Manli GeForce RTX 4090 Gallardo, 24GB GDDR6X (N67540900M35300)- Zotac Gaming GeForce RTX 4090 AMP Extreme AIRO, 24GB GDDR6X (ZT-D40900B-10P)- Zotac Gaming GeForce RTX 4090 Trinity OC, 24GB GDDR6X (ZT-D40900J-10P)- Zotac Gaming GeForce RTX 4090 Trinity, 24GB GDDR6X (ZT-D40900D-10P) Technical data coolerDimensions (L x W x H)235,40 x 145,90 x 32,10mmMaterial coolerchrome-plated copperMaterial cooler topacrylicMax working temperature60°CPressure tested0,8 barThreads4 x G1/4"Thickness cooler bottom11,3mmThickness cooling fins0,4mmDistance cooling fins0,4mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs13ColortransparentTechnical data backplateDimensions (L x W x H)235,40 x 122,90 x 5mmMaterialaluminiumColorblackWarranty: 3 years Warranty Terms

Alphacool's Core product series is characterized by high quality, outstanding performance and the uniform and functional design language.The copper cooler which, like the end terminal, is milled from a single piece of copper and is the core of this cooler. The fine workmanship, paired with the hard and resistant chrome plating covering the entire copper cooler, meet the highest quality standards. The chrome-plated brass G1/4" threads integrated on both sides stand out visually from the terminal. They are a central feature of the new design language that will be evident in all products in the Core series.The aluminum backplate adapted to the design, together with the terminal, makes up the entire unit and enhances the back of the cooler with a clean and homogeneous look. The lighting consists of digitally addressable RGB LEDs, which illuminate the entire cooler evenly and effectively.The technical advancements can be seen in the water supply to the jet plate as well as in the optimization of the jet plate itself. The jet plate has been completely redesigned based on many simulations and practical tests in cooperation with board partners. The fin thickness and spacing have been enhanced, the cooling surface has been increased and the water flow to the core components with the greatest heat output has been optimized. The enclosed special soft thermal pads with up to 7 W/mK adapt perfectly to even the smallest tolerances. Compatibility:- Nvidia GeForce RTX 4090 Founders Edition, 24GB GDDR6X (900-1G136-2530-000) Technical data coolerL x W x H208,87 x 148,69 x 32,33mmMaterial coolerchrome-plated copperMaterial cooler topacrylicMax working temperature60°CPressure tested0,8 barThreads4 x G1/4"Thickness cooler bottom11,3mmThickness cooling fins0,4mmDistance cooling fins0,4mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs12Technical data backplateL x W x H208,87 x 125,69 x 5,76mmMaterialaluminiumColorblackWarranty: 3 years Warranty Terms

Alphacool introduces its new series of graphics card water coolers for the latest Nvidia GeForce RTX generation. Part of the Core product series, these coolers combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers deliver outstanding cooling performance.At the heart of the cooler is a copper block, precisely milled from a single piece and complemented by a precisely crafted brass terminal with a nylon cover. A chrome finish enhances the copper cooler’s durability and provides a smoother, more radiant surface than traditional nickel plating.The visual design of the GPU water cooler has been slightly modified. A new highlight is the Core emblem placed above the jetplate, which emphasizes its affiliation with the Core series and visually enhances the design. The series continues to feature high-quality brass connectors that ensure optimal quality and safety. The specially adapted aluminum backplate covers the entire backside of the copper cooler, ensuring a clear and uniform appearance. The acrylic, combined with aRGB lighting, allows for even and impressive illumination of the entire cooler.The GPU water cooler has been completely overhauled technically. To optimize cooling performance, the distances between the cooler and the components of the PCB were redefined and tested. The water flow was simulated using the most advanced software and verified through practical tests. These extensive tests allowed for improvements to the cooler base and jetplate, ensuring the best possible cooling performance for the new Nvidia GeForce RTX generation. Compatibility:- Inno3D GeForce RTX™ 5070 TWIN X2 (N50702-12D7-195064N)- Inno3D GeForce RTX™ 5070 TWIN X2 OC (N50702-12D7X-195064N)- Inno3D GeForce RTX™ 5070 TWIN X2 OC WHITE (N50702-12D7X-195064W)- Inno3D GeForce RTX™ 5070 X3 OC (N50703-12D7X-195064L)- MSI GeForce RTX™ 5070 12G VENTUS 2X OC (G5070-12V2C) Technical data coolerDimensions total (L x W x H)149,00 x 124,07 x 34,12mmMaterial coolerchrome-plated copperMaterial cooler topAcrylicMaterial terminalNylonMaterial Connection threadBrassMax working temperature60°CPressure tested0,8 barThreads4 x G1/4"Thickness cooler bottom3,25mmThickness cooling fins0,4mmDistance cooling fins0,4mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs6ColortransparentTechnical data backplateDimensions (L x W x H)149,00 x 95,50 x 6,00mmThickness backplate without spacers3mmMaterialAluminiumWarranty: 3 years Warranty Terms

Alphacool introduces its new series of graphics card water coolers for the latest Nvidia GeForce RTX generation. Part of the Core product series, these coolers combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers deliver outstanding cooling performance. At the heart of the cooler is a copper block, precisely milled from a single piece and complemented by a precisely crafted brass terminal with a nylon cover. A chrome finish enhances the copper cooler’s durability and provides a smoother, more radiant surface than traditional nickel plating. The visual design of the GPU water cooler has been slightly modified. A new highlight is the Core emblem placed above the jetplate, which emphasizes its affiliation with the Core series and visually enhances the design. The series continues to feature high-quality brass connectors that ensure optimal quality and safety. The specially adapted aluminum backplate covers the entire backside of the copper cooler, ensuring a clear and uniform appearance. The acrylic, combined with aRGB lighting, allows for even and impressive illumination of the entire cooler. The GPU water cooler has been completely overhauled technically. To optimize cooling performance, the distances between the cooler and the components of the PCB were redefined and tested. The water flow was simulated using the most advanced software and verified through practical tests. These extensive tests allowed for improvements to the cooler base and jetplate, ensuring the best possible cooling performance for the new Nvidia GeForce RTX generation. Compatibility: - PNY GeForce RTX™ 5080 ARGB EPIC-X RGB™ Overclocked Triple Fan GPU - PNY GeForce RTX™ 5080 ARGB EPIC-X RGB™ Triple Fan GPU - PNY GeForce RTX™ 5080 Overclocked Triple Fan GPU - PNY GeForce RTX™ 5080 Triple Fan GPU Technical data cooler Dimensions total (L x W x H): 180 x 124.10 x 34.07mm Material cooler: chrome-plated copper Material cooler top: Acrylic Material terminal: Nylon Material Connection thread: Brass Max working temperature: 60°C Pressure tested: 0.8 bar Threads: 4 x G1/4" Thickness cooler bottom: 3.25mm Thickness cooling fins: 0.4mm Distance cooling fins: 0.4mm Illumination: digital aRGB LEDs Power connector digital aRGB LEDs: 3-Pin JST Power digital aRGB LEDs: 5V Number of digital aRGB LEDs: 7 Color: transparent Technical data backplate Dimensions (L x W x H): 180.00 x 95.57 x 6.00mm Thickness backplate without spacers: 3mm Material: Aluminium Warranty: 3 years Warranty Terms

Alphacool präsentiert die neuen Grafikkarten Wasserkühler für die neueste Nvidia Geforce RTX Generation. Sie sind Teil der Core Produktserie und vereinen höchste Qualität mit außergewöhnlicher Performance. Durch ein optimiertes technisches Design bieten diese GPU-Kühler eine überragende Kühlleistung. Das Acryl, in Kombination mit der aRGB-Beleuchtung, ermöglicht eine gleichmäßige und beeindruckende Beleuchtung des gesamten Kühlers. Technisch wurde der GPU-Wasserkühler vollständig überarbeitet, um die bestmögliche Kühlleistung für die neue Nvidia Geforce RTX Generation zu bieten.

Alphacool presents its new graphics card water coolers for the latest Nvidia GeForce RTX generation. They are part of the Core product series and combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers offer outstanding cooling performance. At the center of the cooler is the one-piece milled copper cooler, complemented by a precision-machined brass terminal with a nylon cover. Chrome plating makes the copper cooler more durable and provides a smoother, brighter surface than conventional nickel plating. The visual design of the GPU water cooler has been changed only slightly. A special highlight is the newly added Core emblem above the jet plate, which underscores its affiliation with the Core series and visually enhances the design. The series continues to rely on high-quality brass fittings, guaranteeing optimal quality and safety. The specially adapted aluminum backplate covers the entire rear of the copper cooler and ensures a clean and uniform appearance. The acrylic, in combination with the aRGB lighting, enables even and impressive illumination of the entire cooler. Technically, the GPU water cooler has been completely redesigned. To optimize cooling performance, the gaps between the cooler and the PCB components were redefined and tested. The water flow was simulated using state-of-the-art software and verified in practical tests. These extensive tests enabled improvements to the cooler base and nozzle to ensure the best possible cooling performance for the new Nvidia GeForce RTX generation. Compatibility: - MSI GeForce RTX™ 5070 Ti 16G GAMING TRIO OC PLUS (V531-058R) - MSI GeForce RTX™ 5070 Ti 16G GAMING TRIO PLUS - MSI GeForce RTX™ 5080 16G GAMING TRIO - MSI GeForce RTX™ 5080 16G GAMING TRIO OC - MSI GeForce RTX™ 5080 16G GAMING TRIO OC White Technical data cooler Complete dimensions (L x W x H) 180.50 x 151.07 x 34.20mm Radiator base material chrome-plated copper Material radiator top Acrylic Material Terminal nylon Material connection thread Brass Maximum working temperature 60°C Pressure tested 0.8 bar Connections 4 x G1/4" Thickness of radiator base 3.25mm Thick cooling fins 0.4mm Distance between cooling fins 0.4mm lighting digital aRGB LEDs Power connection digital aRGB LEDs 3-pin JST Voltage digital aRGB LEDs 5V Number of digital aRGB LEDs 8 Color transparent Technical data backplate Dimensions (L x W x H) 180.50 x 122.50 x 6.00mm Thick backplate without spacers 3mm material aluminum Warranty: 3 years

Alphacool introduces its new series of graphics card water coolers for the latest Nvidia GeForce RTX generation. Part of the Core product series, these coolers combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers deliver outstanding cooling performance. At the heart of the cooler is a copper block, precisely milled from a single piece and complemented by a precisely crafted brass terminal with a nylon cover. A chrome finish enhances the copper cooler’s durability and provides a smoother, more radiant surface than traditional nickel plating. The visual design of the GPU water cooler has been slightly modified. A new highlight is the Core emblem placed above the jetplate, which emphasizes its affiliation with the Core series and visually enhances the design. The series continues to feature high-quality brass connectors that ensure optimal quality and safety. The specially adapted aluminum backplate covers the entire backside of the copper cooler, ensuring a clear and uniform appearance. The acrylic, combined with aRGB lighting, allows for even and impressive illumination of the entire cooler. The GPU water cooler has been completely overhauled technically. To optimize cooling performance, the distances between the cooler and the components of the PCB were redefined and tested. The water flow was simulated using the most advanced software and verified through practical tests. These extensive tests allowed for improvements to the cooler base and jetplate, ensuring the best possible cooling performance for the new Nvidia GeForce RTX generation. Compatibility: - Gainward GeForce RTX™ 5070 Ti Phoenix - Gainward GeForce RTX™ 5080 Phoenix Technical data cooler Dimensions total (L x W x H) 182x 125.95 x 34.19mm Material cooler: chrome-plated copper Material cooler top: Acrylic Material terminal: Nylon Material Connection thread: Brass Max working temperature: 60°C Pressure tested: 0.8 bar Threads: 4 x G1/4" Thickness cooler bottom: 3.25mm Thickness cooling fins: 0.4mm Distance cooling fins: 0.4mm Illumination: digital aRGB LEDs Power connector digital aRGB LEDs: 3-Pin JST Power digital aRGB LEDs: 5V Number of digital aRGB LEDs: 7 Color: transparent Technical data backplate Dimensions (L x W x H): 182 x 97.50 x 6mm Thickness backplate without spacers: 3mm Material: Aluminum Warranty: 3 years Warranty Terms

Alphacool introduces its new series of graphics card water coolers for the latest Nvidia GeForce RTX generation. Part of the Core product series, these coolers combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers deliver outstanding cooling performance. At the heart of the cooler is a copper block, precisely milled from a single piece and complemented by a precisely crafted brass terminal with a nylon cover. A chrome finish enhances the copper cooler’s durability and provides a smoother, more radiant surface than traditional nickel plating. The visual design of the GPU water cooler has been slightly modified. A new highlight is the Core emblem placed above the jetplate, which emphasizes its affiliation with the Core series and visually enhances the design. The series continues to feature high-quality brass connectors that ensure optimal quality and safety. The specially adapted aluminum backplate covers the entire backside of the copper cooler, ensuring a clear and uniform appearance. The acrylic, combined with aRGB lighting, allows for even and impressive illumination of the entire cooler. The GPU water cooler has been completely overhauled technically. To optimize cooling performance, the distances between the cooler and the components of the PCB were redefined and tested. The water flow was simulated using the most advanced software and verified through practical tests. These extensive tests allowed for improvements to the cooler base and jetplate, ensuring the best possible cooling performance for the new Nvidia GeForce RTX generation. Compatibility: - Asus Prime GeForce RTX 5070 Ti OC, PRIME-RTX5070TI-O16G, 16GB GDDR7 (90YV0MF0-M0NA00) - Asus Prime GeForce RTX 5080 OC, PRIME-RTX5080-O16G, 16GB GDDR7 (90YV0LX0-M0NA00) Technical data cooler Dimensions total (L x W x H) 220x 140.60 x 34.19mm Material cooler chrome-plated copper Material cooler top Acrylic Material terminal Nylon Material Connection thread Brass Max working temperature 60°C Pressure tested 0.8 bar Threads 4 x G1/4" Thickness cooler bottom 3.25mm Thickness cooling fins 0.4mm Distance cooling fins 0.4mm Illumination digital aRGB LEDs Power connector digital aRGB LEDs 3-Pin JST Power digital aRGB LEDs 5V Number of digital aRGB LEDs 10 Color transparent Technical data backplate Dimensions (L x W x H) 220 x 112.10 x 6mm Thickness backplate without spacers 3mm Material Aluminium Warranty: 3 years Warranty Terms

Alphacool introduces its new series of graphics card water coolers for the latest Nvidia GeForce RTX generation. Part of the Core product series, these coolers combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers deliver outstanding cooling performance.At the heart of the cooler is a copper block, precisely milled from a single piece and complemented by a precisely crafted brass terminal with a nylon cover. A chrome finish enhances the copper cooler’s durability and provides a smoother, more radiant surface than traditional nickel plating.The visual design of the GPU water cooler has been slightly modified. A new highlight is the Core emblem placed above the jetplate, which emphasizes its affiliation with the Core series and visually enhances the design. The series continues to feature high-quality brass connectors that ensure optimal quality and safety. The specially adapted aluminum backplate covers the entire backside of the copper cooler, ensuring a clear and uniform appearance. The acrylic, combined with aRGB lighting, allows for even and impressive illumination of the entire cooler.The GPU water cooler has been completely overhauled technically. To optimize cooling performance, the distances between the cooler and the components of the PCB were redefined and tested. The water flow was simulated using the most advanced software and verified through practical tests. These extensive tests allowed for improvements to the cooler base and jetplate, ensuring the best possible cooling performance for the new Nvidia GeForce RTX generation. Compatibility:- Asus ROG Astral GeForce RTX™ 5080 16GB GDDR7 OC Edition Technical data coolerDimensions total (L x W x H)261,00 x 161,20 x 34,15mmMaterial coolerchrome-plated copperMaterial cooler topAcrylicMaterial terminalNylonMaterial Connection threadBrassMax working temperature60°CPressure tested0,8 barThreads4 x G1/4"Thickness cooler bottom3,25mmThickness cooling fins0,4mmDistance cooling fins0,4mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs11ColortransparentTechnical data backplateDimensions (L x W x H)261,00 x 132,70 x 6mmThickness backplate without spacers3mmMaterialAluminiumWarranty: 3 years Warranty Terms

Alphacool Core Geforce RTX 5080 Solid + AMP mit Backplate Alphacool präsentiert die neuen Grafikkarten Wasserkühler für die neueste Nvidia Geforce RTX Generation. Sie sind Teil der Core Produktserie und vereinen höchste Qualität mit außergewöhnlicher Performance. Durch ein optimiertes technisches Design bieten diese GPU-Kühler eine überragende Kühlleistung.Im Zentrum des Kühlers befindet sich der aus einem Stück gefräste Kupferkühler, ergänzt durch ein präzise aus Messing gefertigtes Anschlussterminal mit einem Nylon-Cover. Eine Verchromung macht den Kupferkühler widerstandsfähiger und sorgt für eine glattere sowie strahlendere Oberfläche als bei einer herkömmlichen Vernickelung.Die optische Gestaltung des GPU-Wasserkühlers wurde nur geringfügig verändert. Ein besonderes Highlight ist das neu hinzugekommene Core-Emblem über der Jetplate, dass die Zugehörigkeit zur Core-Serie unterstreicht und das Design visuell aufwertet. Die Serie setzt weiterhin auf hochwertige Messinganschlüsse, die optimale Qualität und Sicherheit garantieren. Die speziell angepasste Aluminium-Backplate bedeckt die komplette Rückseite des Kupferkühlers und sorgt für eine klare und einheitliche Optik. Das Acryl, in Kombination mit der aRGB-Beleuchtung, ermöglicht eine gleichmäßige und beeindruckende Beleuchtung des gesamten Kühlers.Technisch wurde der GPU-Wasserkühler vollständig überarbeitet. Zur Optimierung der Kühlleistung wurden die Abstände zwischen dem Kühler und den Bauteilen des PCBs neu definiert und getestet. Der Wasserverlauf wurde mit modernster Software simuliert und in praktischen Versuchen überprüft. Durch diese umfangreichen Tests konnte der Kühlerboden und die Düse verbessert werden, um die bestmögliche Kühlleistung für die neue Nvidia Geforce RTX Generation zu gewährleisten. Kompatibilität:- Zotac Gaming GeForce RTX 5070 Ti Solid OC (ZT-B50710J-10P)- Zotac Gaming GeForce RTX™ 5080 AMP Extreme Infinity (ZT-B50800B-10P)- Zotac Gaming GeForce RTX™ 5080 AMP Extreme Infinity Ultra (ZT-B50800BU-10P)- Zotac Gaming GeForce RTX™ 5080 Solid (ZT-B50800D-10P)- Zotac Gaming GeForce RTX™ 5080 Solid OC (ZT-B50800J-10P) Technische Daten Kühler Abmessungen Komplett (L x B x H) 235,60 x 150,57 x 34,10mm Material Kühlerboden verchromtes Kupfer Material Kühleroberseite Acryl Material Terminal Nylon Material Anschlussgewinde Messing Maximale Arbeitstemperatur 60°C Druckgetestet 0,8 bar Anschlüsse 4 x G1/4" Dicke Kühlerboden 3,25mm Dicke Kühlfinnen 0,4mm Abstand Kühlfinnen 0,4mm Beleuchtung digital aRGB LEDs Stromanschluss digital aRGB LEDs 3-Pin JST Spannung digital aRGB LEDs 5V Anzahl digital aRGB LEDs 11 Farbe transparent Technische Daten Backplate Abmessungen (L x B x H) 235,60 x 122,00 x 6mm Dicke Backplate ohne Abstandshalter 3mm Material Aluminium Garantie: 3 Jahre? Garantiebestimmungen

Alphacool introduces its new series of graphics card water coolers for the latest Nvidia GeForce RTX generation. Part of the Core product series, these coolers combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers deliver outstanding cooling performance.At the heart of the cooler is a copper block, precisely milled from a single piece and complemented by a precisely crafted brass terminal with a nylon cover. A chrome finish enhances the copper cooler’s durability and provides a smoother, more radiant surface than traditional nickel plating.The visual design of the GPU water cooler has been slightly modified. A new highlight is the Core emblem placed above the jetplate, which emphasizes its affiliation with the Core series and visually enhances the design. The series continues to feature high-quality brass connectors that ensure optimal quality and safety. The specially adapted aluminum backplate covers the entire backside of the copper cooler, ensuring a clear and uniform appearance. The acrylic, combined with aRGB lighting, allows for even and impressive illumination of the entire cooler.The GPU water cooler has been completely overhauled technically. To optimize cooling performance, the distances between the cooler and the components of the PCB were redefined and tested. The water flow was simulated using the most advanced software and verified through practical tests. These extensive tests allowed for improvements to the cooler base and jetplate, ensuring the best possible cooling performance for the new Nvidia GeForce RTX generation. Compatibility:- MSI GeForce RTX™ 5070 Ti 16G Vanguard SOC- MSI GeForce RTX™ 5080 16G SUPRIM LIQUID SOC- MSI GeForce RTX™ 5080 16G SUPRIM SOC (MS-V531 VER:2.0)- MSI GeForce RTX™ 5080 16G Vanguard SOC (MS-V531 VER:2.0) Technical data coolerDimensions total (L x W x H)181,50 x 161,03 x 34,19mmMaterial coolerchrome-plated copperMaterial cooler topAcrylicMaterial terminalNylonMaterial Connection threadBrassMax working temperature60°CPressure tested0,8 barThreads4 x G1/4"Thickness cooler bottom3,25mmThickness cooling fins0,4mmDistance cooling fins0,4mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs8ColortransparentTechnical data backplateDimensions (L x W x H)181,50 x 132,50 x 6mmThickness backplate without spacers3mmMaterialAluminiumWarranty: 3 years Warranty Terms

Alphacool introduces its new series of graphics card water coolers for the latest Nvidia GeForce RTX generation. Part of the Core product series, these coolers combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers deliver outstanding cooling performance.At the heart of the cooler is a copper block, precisely milled from a single piece and complemented by a precisely crafted brass terminal with a nylon cover. A chrome finish enhances the copper cooler’s durability and provides a smoother, more radiant surface than traditional nickel plating.The visual design of the GPU water cooler has been slightly modified. A new highlight is the Core emblem placed above the jetplate, which emphasizes its affiliation with the Core series and visually enhances the design. The series continues to feature high-quality brass connectors that ensure optimal quality and safety. The specially adapted aluminum backplate covers the entire backside of the copper cooler, ensuring a clear and uniform appearance. The acrylic, combined with aRGB lighting, allows for even and impressive illumination of the entire cooler.The GPU water cooler has been completely overhauled technically. To optimize cooling performance, the distances between the cooler and the components of the PCB were redefined and tested. The water flow was simulated using the most advanced software and verified through practical tests. These extensive tests allowed for improvements to the cooler base and jetplate, ensuring the best possible cooling performance for the new Nvidia GeForce RTX generation. Compatibility: - Zotac Gaming Geforce RTX 5070 Ti Solid SFF OC 16GB (ZT-B50710J3-10P)- Zotac GeForce RTX 5070 Ti SOLID CORE (ZT-B50710D2-10P)- Zotac GeForce RTX 5070 Ti SOLID CORE OC (ZT-B50710J2-10P)- Zotac GeForce RTX 5080 SOLID CORE (ZT-B50800D2-10P)- Zotac GeForce RTX 5080 SOLID CORE OC (ZT-B50800J2-10P) Technical data cooler Dimensions total (L x W x H) 227,50 x 128,33 x 34,07mm Material cooler chrome-plated copper Material cooler top Acrylic Material terminal Nylon Material Connection thread Brass Max working temperature 60°C Pressure tested 0,8 bar Threads 4 x G1/4" Thickness cooler bottom 3,25mm Thickness cooling fins 0,4mm Distance cooling fins 0,4mm Illumination digital aRGB LEDs Power connector digital aRGB LEDs 3-Pin JST Power digital aRGB LEDs 5V Number of digital aRGB LEDs 10 Color transparent Technical data backplate Dimensions (L x W x H) 227,50 x 99,80 x 6,00mm Thickness backplate without spacers 3mm Material Aluminium Warranty: 3 years

Alphacool präsentiert die neuen Grafikkarten Wasserkühler für die neueste Nvidia Geforce RTX Generation. Sie sind Teil der Core Produktserie und vereinen höchste Qualität mit außergewöhnlicher Performance. Durch ein optimiertes technisches Design bieten diese GPU-Kühler eine überragende Kühlleistung. Das Acryl, in Kombination mit der aRGB-Beleuchtung, ermöglicht eine gleichmäßige und beeindruckende Beleuchtung des gesamten Kühlers. Technisch wurde der GPU-Wasserkühler vollständig überarbeitet, um die bestmögliche Kühlleistung für die neue Nvidia Geforce RTX Generation zu bieten.

Alphacool introduces its new series of graphics card water coolers for the latest Nvidia GeForce RTX generation. Part of the Core product series, these coolers combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers deliver outstanding cooling performance.At the heart of the cooler is a copper block, precisely milled from a single piece and complemented by a precisely crafted brass terminal with a nylon cover. A chrome finish enhances the copper cooler’s durability and provides a smoother, more radiant surface than traditional nickel plating.The visual design of the GPU water cooler has been slightly modified. A new highlight is the Core emblem placed above the jetplate, which emphasizes its affiliation with the Core series and visually enhances the design. The series continues to feature high-quality brass connectors that ensure optimal quality and safety. The specially adapted aluminum backplate covers the entire backside of the copper cooler, ensuring a clear and uniform appearance. The acrylic, combined with aRGB lighting, allows for even and impressive illumination of the entire cooler.The GPU water cooler has been completely overhauled technically. To optimize cooling performance, the distances between the cooler and the components of the PCB were redefined and tested. The water flow was simulated using the most advanced software and verified through practical tests. These extensive tests allowed for improvements to the cooler base and jetplate, ensuring the best possible cooling performance for the new Nvidia GeForce RTX generation. Compatibility:- Palit GeForce RTX™ 5070 Ti GamingPro (NE7507T019T2-GB2031A)- Palit GeForce RTX™ 5070 Ti GamingPro OC (NE7507TS19T2-GB2031A)- Palit GeForce RTX™ 5070 Ti GamingPro V1 (NE7507T019T2-GB2031Y)- Palit GeForce RTX™ 5080 GamingPro (NE75080019T2-GB2031A)- Palit GeForce RTX™ 5080 GamingPro OC (NE75080S19T2-GB2031A) Technical data coolerDimensions total (L x W x H)184,70 x 125,32 x 34,19mmMaterial coolerchrome-plated copperMaterial cooler topAcrylicMaterial terminalNylonMaterial Connection threadBrassMax working temperature60°CPressure tested0,8 barThreads4 x G1/4"Thickness cooler bottom3,25mmThickness cooling fins0,4mmDistance cooling fins0,4mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs8ColortransparentTechnical data backplateDimensions (L x W x H)184,70 x 96,75 x 6,00mmThickness backplate without spacers3mmMaterialAluminiumWarranty: 3 years Warranty Terms