Arvutitark OÜ

Alphacool introduces its new series of graphics card water coolers for the latest Nvidia GeForce RTX generation. Part of the Core product series, these coolers combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers deliver outstanding cooling performance.At the heart of the cooler is a copper block, precisely milled from a single piece and complemented by a precisely crafted brass terminal with a nylon cover. A chrome finish enhances the copper cooler’s durability and provides a smoother, more radiant surface than traditional nickel plating.The visual design of the GPU water cooler has been slightly modified. A new highlight is the Core emblem placed above the jetplate, which emphasizes its affiliation with the Core series and visually enhances the design. The series continues to feature high-quality brass connectors that ensure optimal quality and safety. The specially adapted aluminum backplate covers the entire backside of the copper cooler, ensuring a clear and uniform appearance. The acrylic, combined with aRGB lighting, allows for even and impressive illumination of the entire cooler.The GPU water cooler has been completely overhauled technically. To optimize cooling performance, the distances between the cooler and the components of the PCB were redefined and tested. The water flow was simulated using the most advanced software and verified through practical tests. These extensive tests allowed for improvements to the cooler base and jetplate, ensuring the best possible cooling performance for the new Nvidia GeForce RTX generation. Compatibility:- Asus ROG Astral GeForce RTX™ 5080 16GB GDDR7 OC Edition Technical data coolerDimensions total (L x W x H)261,00 x 161,20 x 34,15mmMaterial coolerchrome-plated copperMaterial cooler topAcrylicMaterial terminalNylonMaterial Connection threadBrassMax working temperature60°CPressure tested0,8 barThreads4 x G1/4"Thickness cooler bottom3,25mmThickness cooling fins0,4mmDistance cooling fins0,4mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs11ColortransparentTechnical data backplateDimensions (L x W x H)261,00 x 132,70 x 6mmThickness backplate without spacers3mmMaterialAluminiumWarranty: 3 years???? Warranty Terms

Alphacool introduces its new series of graphics card water coolers for the latest Nvidia GeForce RTX generation. Part of the Core product series, these coolers combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers deliver outstanding cooling performance.At the heart of the cooler is a copper block, precisely milled from a single piece and complemented by a precisely crafted brass terminal with a nylon cover. A chrome finish enhances the copper cooler’s durability and provides a smoother, more radiant surface than traditional nickel plating.The visual design of the GPU water cooler has been slightly modified. A new highlight is the Core emblem placed above the jetplate, which emphasizes its affiliation with the Core series and visually enhances the design. The series continues to feature high-quality brass connectors that ensure optimal quality and safety. The specially adapted aluminum backplate covers the entire backside of the copper cooler, ensuring a clear and uniform appearance. The acrylic, combined with aRGB lighting, allows for even and impressive illumination of the entire cooler.The GPU water cooler has been completely overhauled technically. To optimize cooling performance, the distances between the cooler and the components of the PCB were redefined and tested. The water flow was simulated using the most advanced software and verified through practical tests. These extensive tests allowed for improvements to the cooler base and jetplate, ensuring the best possible cooling performance for the new Nvidia GeForce RTX generation. Compatibility:- MSI GeForce RTX™ 5070 Ti 16G Vanguard SOC- MSI GeForce RTX™ 5080 16G SUPRIM LIQUID SOC- MSI GeForce RTX™ 5080 16G SUPRIM SOC (MS-V531 VER:2.0)- MSI GeForce RTX™ 5080 16G Vanguard SOC (MS-V531 VER:2.0) Technical data coolerDimensions total (L x W x H)181,50 x 161,03 x 34,19mmMaterial coolerchrome-plated copperMaterial cooler topAcrylicMaterial terminalNylonMaterial Connection threadBrassMax working temperature60°CPressure tested0,8 barThreads4 x G1/4"Thickness cooler bottom3,25mmThickness cooling fins0,4mmDistance cooling fins0,4mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs8ColortransparentTechnical data backplateDimensions (L x W x H)181,50 x 132,50 x 6mmThickness backplate without spacers3mmMaterialAluminiumWarranty: 3 years???? Warranty Terms

Alphacool introduces its new series of graphics card water coolers for the latest Nvidia GeForce RTX generation. Part of the Core product series, these coolers combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers deliver outstanding cooling performance.At the heart of the cooler is a copper block, precisely milled from a single piece and complemented by a precisely crafted brass terminal with a nylon cover. A chrome finish enhances the copper cooler’s durability and provides a smoother, more radiant surface than traditional nickel plating.The visual design of the GPU water cooler has been slightly modified. A new highlight is the Core emblem placed above the jetplate, which emphasizes its affiliation with the Core series and visually enhances the design. The series continues to feature high-quality brass connectors that ensure optimal quality and safety. The specially adapted aluminum backplate covers the entire backside of the copper cooler, ensuring a clear and uniform appearance. The acrylic, combined with aRGB lighting, allows for even and impressive illumination of the entire cooler.The GPU water cooler has been completely overhauled technically. To optimize cooling performance, the distances between the cooler and the components of the PCB were redefined and tested. The water flow was simulated using the most advanced software and verified through practical tests. These extensive tests allowed for improvements to the cooler base and jetplate, ensuring the best possible cooling performance for the new Nvidia GeForce RTX generation. Compatibility:- Palit GeForce RTX™ 5070 Ti GamingPro (NE7507T019T2-GB2031A)- Palit GeForce RTX™ 5070 Ti GamingPro OC (NE7507TS19T2-GB2031A)- Palit GeForce RTX™ 5070 Ti GamingPro V1 (NE7507T019T2-GB2031Y)- Palit GeForce RTX™ 5080 GamingPro (NE75080019T2-GB2031A)- Palit GeForce RTX™ 5080 GamingPro OC (NE75080S19T2-GB2031A) Technical data coolerDimensions total (L x W x H)184,70 x 125,32 x 34,19mmMaterial coolerchrome-plated copperMaterial cooler topAcrylicMaterial terminalNylonMaterial Connection threadBrassMax working temperature60°CPressure tested0,8 barThreads4 x G1/4"Thickness cooler bottom3,25mmThickness cooling fins0,4mmDistance cooling fins0,4mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs8ColortransparentTechnical data backplateDimensions (L x W x H)184,70 x 96,75 x 6,00mmThickness backplate without spacers3mmMaterialAluminiumWarranty: 3 years???? Warranty Terms

Alphacool presents its new graphics card water coolers for the latest Nvidia GeForce RTX generation. They are part of the Core product series and combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers offer outstanding cooling performance. At the center of the cooler is the one-piece milled copper cooler, complemented by a precision-machined brass terminal with a nylon cover. Chrome plating makes the copper cooler more durable and provides a smoother, brighter surface than conventional nickel plating. The visual design of the GPU water cooler has been changed only slightly. A special highlight is the newly added Core emblem above the jet plate, which underscores its affiliation with the Core series and visually enhances the design. The series continues to rely on high-quality brass fittings, guaranteeing optimal quality and safety. The specially adapted aluminum backplate covers the entire rear of the copper cooler and ensures a clean and uniform appearance. The acrylic, in combination with the aRGB lighting, enables even and impressive illumination of the entire cooler. Technically, the GPU water cooler has been completely redesigned. To optimize cooling performance, the gaps between the cooler and the PCB components were redefined and tested. The water flow was simulated using state-of-the-art software and verified in practical tests. These extensive tests enabled improvements to the cooler base and nozzle to ensure the best possible cooling performance for the new Nvidia GeForce RTX generation. Compatibility: - PNY GeForce RTX™ 5090 ARGB EPIC-X RGB™ Overclocked Triple Fan GPU - PNY GeForce RTX™ 5090 ARGB EPIC-X RGB™ Triple Fan GPU - PNY GeForce RTX™ 5090 Overclocked Triple Fan GPU - PNY GeForce RTX™ 5090 Triple Fan GPU Technical data cooler - Complete dimensions (L x W x H): 218.40 x 148.57 x 34.38mm - Radiator base material: chrome-plated copper - Material radiator top: Acrylic - Material Terminal: Acetal - Material connection thread: Brass - Maximum working temperature: 60°C - Pressure tested: 0.8 bar - Connections: 4 x G1/4" - Thickness of radiator base: 3.25mm - Thick cooling fins: 0.4mm - Distance between cooling fins: 0.4mm - Lighting: digital aRGB LEDs - Power connection digital aRGB LEDs: 3-pin JST - Voltage digital aRGB LEDs: 5V - Number of digital aRGB LEDs: 9 - Color: transparent Technical data backplate - Dimensions (L x W x H): 218.40 x 120.00 x 6.00mm - Thick backplate without spacers: 3mm - Material: aluminum Warranty: 3 years

Alphacool introduces its new series of graphics card water coolers for the latest Nvidia GeForce RTX generation. Part of the Core product series, these coolers combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers deliver outstanding cooling performance.At the heart of the cooler is a copper block, precisely milled from a single piece and complemented by a precisely crafted brass terminal with a nylon cover. A chrome finish enhances the copper cooler’s durability and provides a smoother, more radiant surface than traditional nickel plating.The visual design of the GPU water cooler has been slightly modified. A new highlight is the Core emblem placed above the jetplate, which emphasizes its affiliation with the Core series and visually enhances the design. The series continues to feature high-quality brass connectors that ensure optimal quality and safety. The specially adapted aluminum backplate covers the entire backside of the copper cooler, ensuring a clear and uniform appearance. The acrylic, combined with aRGB lighting, allows for even and impressive illumination of the entire cooler.The GPU water cooler has been completely overhauled technically. To optimize cooling performance, the distances between the cooler and the components of the PCB were redefined and tested. The water flow was simulated using the most advanced software and verified through practical tests. These extensive tests allowed for improvements to the cooler base and jetplate, ensuring the best possible cooling performance for the new Nvidia GeForce RTX generation. Compatibility:- Gigabyte AORUS GeForce RTX 5090 MASTER 32G (GV-N5090AORUS M-32GD)- Gigabyte GeForce RTX 5090 GAMING OC 32G (GV-N5090GAMING OC-32GD)- Gigabyte GeForce RTX™ 5090 WINDFORCE OC 32G (GV-N5090WF3OC-32GD) Technical data coolerDimensions total (L x W x H)237,50 x 157,07 x 34,20mmMaterial coolerchrome-plated copperMaterial cooler topAcrylicMaterial terminalNylonMaterial Connection threadBrassMax working temperature60°CPressure tested0,8 barThreads4 x G1/4"Thickness cooler bottom3,25mmThickness cooling fins0,4mmDistance cooling fins0,4mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs11ColortransparentTechnical data backplateDimensions (L x W x H)237,50 x 128,50 x 6mmThick backplate without spacers3mmMaterialAluminiumWarranty: 3 years???? Warranty Terms

Alphacool presents its new graphics card water coolers for the latest Nvidia GeForce RTX generation. They are part of the Core product series and combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers offer outstanding cooling performance. At the center of the cooler is the one-piece milled copper cooler, complemented by a precision-machined brass terminal with a nylon cover. Chrome plating makes the copper cooler more durable and provides a smoother, brighter surface than conventional nickel plating. The visual design of the GPU water cooler has been changed only slightly. A special highlight is the newly added Core emblem above the jet plate, which underscores its affiliation with the Core series and visually enhances the design. The series continues to rely on high-quality brass fittings, guaranteeing optimal quality and safety. The specially adapted aluminum backplate covers the entire rear of the copper cooler and ensures a clean and uniform appearance. The acrylic, in combination with the aRGB lighting, enables even and impressive illumination of the entire cooler. Technically, the GPU water cooler has been completely redesigned. To optimize cooling performance, the gaps between the cooler and the PCB components were redefined and tested. The water flow was simulated using state-of-the-art software and verified in practical tests. These extensive tests enabled improvements to the cooler base and nozzle to ensure the best possible cooling performance for the new Nvidia GeForce RTX generation. Compatibility: - Asus ROG Astral GeForce RTX™ 5090 32GB GDDR7 (90YV0LW1-M0NA00) - Asus ROG Astral GeForce RTX™ 5090 32GB GDDR7 OC Edition (90YV0LW0-M0NA00) - Asus ROG Astral LC GeForce RTX™ 5090 32GB GDDR7 (90YV0LW3-M0NA00) - Asus ROG Astral LC GeForce RTX™ 5090 32GB GDDR7 OC Edition (90YV0LW2-M0NA00) Technical data cooler Complete dimensions (L x W x H): 260.25 x 160.90 x 34.32mm Radiator base material: chrome-plated copper Material radiator top: Acrylic Material Terminal: nylon Material connection thread: Brass Maximum working temperature: 60°C Pressure tested: 0.8 bar Connections: 4 x G1/4" Thickness of radiator base: 3.25mm Thick cooling fins: 0.4mm Distance between cooling fins: 0.4mm Lighting: digital aRGB LEDs Power connection digital aRGB LEDs: 3-pin JST Voltage digital aRGB LEDs: 5V Number of digital aRGB LEDs: 12 Color: transparent Technical data backplate Dimensions (L x W x H): 260.25 x 132.50 x 6mm Thick backplate without spacers: 3mm Material: aluminum Warranty: 3 years

Alphacool Core Geforce RTX 5090 Solid + AMP mit Backplate Alphacool präsentiert die neuen Grafikkarten Wasserkühler für die neueste Nvidia Geforce RTX Generation. Sie sind Teil der Core Produktserie und vereinen höchste Qualität mit außergewöhnlicher Performance. Durch ein optimiertes technisches Design bieten diese GPU-Kühler eine überragende Kühlleistung.Im Zentrum des Kühlers befindet sich der aus einem Stück gefräste Kupferkühler, ergänzt durch ein präzise aus Messing gefertigtes Anschlussterminal mit einem Nylon-Cover. Eine Verchromung macht den Kupferkühler widerstandsfähiger und sorgt für eine glattere sowie strahlendere Oberfläche als bei einer herkömmlichen Vernickelung.Die optische Gestaltung des GPU-Wasserkühlers wurde nur geringfügig verändert. Ein besonderes Highlight ist das neu hinzugekommene Core-Emblem über der Jetplate, dass die Zugehörigkeit zur Core-Serie unterstreicht und das Design visuell aufwertet. Die Serie setzt weiterhin auf hochwertige Messinganschlüsse, die optimale Qualität und Sicherheit garantieren. Die speziell angepasste Aluminium-Backplate bedeckt die komplette Rückseite des Kupferkühlers und sorgt für eine klare und einheitliche Optik. Das Acryl, in Kombination mit der aRGB-Beleuchtung, ermöglicht eine gleichmäßige und beeindruckende Beleuchtung des gesamten Kühlers.Technisch wurde der GPU-Wasserkühler vollständig überarbeitet. Zur Optimierung der Kühlleistung wurden die Abstände zwischen dem Kühler und den Bauteilen des PCBs neu definiert und getestet. Der Wasserverlauf wurde mit modernster Software simuliert und in praktischen Versuchen überprüft. Durch diese umfangreichen Tests konnte der Kühlerboden und die Düse verbessert werden, um die bestmögliche Kühlleistung für die neue Nvidia Geforce RTX Generation zu gewährleisten. Kompatibilität:- Zotac Gaming GeForce RTX™ 5090 AMP Extreme Infinity (ZT-B50900B-10P)- Zotac Gaming GeForce RTX™ 5090 Solid (ZT-B50900D-10P)- Zotac Gaming GeForce RTX™ 5090 Solid OC (ZT-B50900J-10P) Technische Daten Kühler Abmessungen Komplett (L x B x H) 234,00 x 150,53 x 34,10mm Material Kühlerboden verchromtes Kupfer Material Kühleroberseite Acryl Material Terminal Acetal Material Anschlussgewinde Messing Maximale Arbeitstemperatur 60°C Druckgetestet 0,8 bar Anschlüsse 4 x G1/4" Dicke Kühlerboden 3,25mm Dicke Kühlfinnen 0,4mm Abstand Kühlfinnen 0,4mm Beleuchtung digital aRGB LEDs Stromanschluss digital aRGB LEDs 3-Pin JST Spannung digital aRGB LEDs 5V Anzahl digital aRGB LEDs 11 Farbe transparent Technische Daten Backplate Abmessungen (L x B x H) 234,00 x 122,00 x 6mm Dicke Backplate ohne Abstandshalter 3mm Material Aluminium Garantie: 3 Jahre? Garantiebestimmungen

Alphacool presents its new graphics card water coolers for the latest Nvidia GeForce RTX generation. They are part of the Core product series and combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers offer outstanding cooling performance. At the center of the cooler is the one-piece milled copper cooler, complemented by a precision-machined brass terminal with a nylon cover. Chrome plating makes the copper cooler more durable and provides a smoother, brighter surface than conventional nickel plating. The visual design of the GPU water cooler has been changed only slightly. A special highlight is the newly added Core emblem above the jet plate, which underscores its affiliation with the Core series and visually enhances the design. The series continues to rely on high-quality brass fittings, guaranteeing optimal quality and safety. The specially adapted aluminum backplate covers the entire rear of the copper cooler and ensures a clean and uniform appearance. The acrylic, in combination with the aRGB lighting, enables even and impressive illumination of the entire cooler. Technically, the GPU water cooler has been completely redesigned. To optimize cooling performance, the gaps between the cooler and the PCB components were redefined and tested. The water flow was simulated using state-of-the-art software and verified in practical tests. These extensive tests enabled improvements to the cooler base and nozzle to ensure the best possible cooling performance for the new Nvidia GeForce RTX generation. Compatibility: - MSI GeForce RTX™ 5090 32G GAMING TRIO OC - MSI GeForce RTX™ 5090 32G SUPRIM LIQUID SOC (MS-V530 Ver:2.1) - MSI GeForce RTX™ 5090 32G SUPRIM SOC (MS-V530 Ver:2.1) - MSI GeForce RTX™ 5090 32G Vanguard SOC - MSI GeForce RTX™ 5090 32G Vanguard SOC Launch Edition Technical data cooler Complete dimensions (L x W x H): 222.40 x 160.81 x 34.12mm Radiator base material: chrome-plated copper Material radiator top: Acrylic Material Terminal: nylon Material connection thread: Brass Maximum working temperature: 60°C Pressure tested: 0.8 bar Connections: 4 x G1/4" Thickness of radiator base: 3.25mm Thick cooling fins: 0.4mm Distance between cooling fins: 0.4mm lighting: digital aRGB LEDs Power connection digital aRGB LEDs: 3-pin JST Voltage digital aRGB LEDs: 5V Number of digital aRGB LEDs: 10 Color: transparent Technical data backplate Dimensions (L x W x H): 222.40 x 132.24 x 6mm Thick backplate without spacers: 3mm material: aluminum Warranty: 3 years

Alphacool Core Geforce RTX 5090 TUF Gaming mit Backplate Alphacool präsentiert die neuen Grafikkarten Wasserkühler für die neueste Nvidia Geforce RTX Generation. Sie sind Teil der Core Produktserie und vereinen höchste Qualität mit außergewöhnlicher Performance. Durch ein optimiertes technisches Design bieten diese GPU-Kühler eine überragende Kühlleistung.Im Zentrum des Kühlers befindet sich der aus einem Stück gefräste Kupferkühler, ergänzt durch ein präzise aus Messing gefertigtes Anschlussterminal mit einem Nylon-Cover. Eine Verchromung macht den Kupferkühler widerstandsfähiger und sorgt für eine glattere sowie strahlendere Oberfläche als bei einer herkömmlichen Vernickelung.Die optische Gestaltung des GPU-Wasserkühlers wurde nur geringfügig verändert. Ein besonderes Highlight ist das neu hinzugekommene Core-Emblem über der Jetplate, dass die Zugehörigkeit zur Core-Serie unterstreicht und das Design visuell aufwertet. Die Serie setzt weiterhin auf hochwertige Messinganschlüsse, die optimale Qualität und Sicherheit garantieren. Die speziell angepasste Aluminium-Backplate bedeckt die komplette Rückseite des Kupferkühlers und sorgt für eine klare und einheitliche Optik. Das Acryl, in Kombination mit der aRGB-Beleuchtung, ermöglicht eine gleichmäßige und beeindruckende Beleuchtung des gesamten Kühlers.Technisch wurde der GPU-Wasserkühler vollständig überarbeitet. Zur Optimierung der Kühlleistung wurden die Abstände zwischen dem Kühler und den Bauteilen des PCBs neu definiert und getestet. Der Wasserverlauf wurde mit modernster Software simuliert und in praktischen Versuchen überprüft. Durch diese umfangreichen Tests konnte der Kühlerboden und die Düse verbessert werden, um die bestmögliche Kühlleistung für die neue Nvidia Geforce RTX Generation zu gewährleisten. Kompatibilität:- Asus TUF Gaming GeForce RTX™ 5090 32GB GDDR7 (90YV0LY1-M0NA00)- Asus TUF Gaming GeForce RTX™ 5090 32GB GDDR7 OC Edition (90YV0LY0-M0NA00) Technische Daten Kühler Abmessungen Komplett (L x B x H) 235,95 x 155,57 x 34,12mm Material Kühlerboden verchromtes Kupfer Material Kühleroberseite Acryl Material Terminal Nylon Material Anschlussgewinde Messing Maximale Arbeitstemperatur 60°C Druckgetestet 0,8 bar Anschlüsse 4 x G1/4" Dicke Kühlerboden 3,25mm Dicke Kühlfinnen 0,4mm Abstand Kühlfinnen 0,4mm Beleuchtung digital aRGB LEDs Stromanschluss digital aRGB LEDs 3-Pin JST Spannung digital aRGB LEDs 5V Anzahl digital aRGB LEDs 9 Farbe transparent Technische Daten Backplate Abmessungen (L x B x H) 235,95 x 127,00 x 6mm Dicke Backplate ohne Abstandshalter 3mm Material Aluminium Garantie: 3 Jahre? Garantiebestimmungen

Alphacool introduces its new series of graphics card water coolers for the latest Nvidia GeForce RTX generation. Part of the Core product series, these coolers combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers deliver outstanding cooling performance. At the heart of the cooler is a copper block, precisely milled from a single piece and complemented by a precisely crafted brass terminal with a nylon cover. A chrome finish enhances the copper cooler’s durability and provides a smoother, more radiant surface than traditional nickel plating. The visual design of the GPU water cooler has been slightly modified. A new highlight is the Core emblem placed above the jetplate, which emphasizes its affiliation with the Core series and visually enhances the design. The series continues to feature high-quality brass connectors that ensure optimal quality and safety. The specially adapted aluminum backplate covers the entire backside of the copper cooler, ensuring a clear and uniform appearance. The acrylic, combined with aRGB lighting, allows for even and impressive illumination of the entire cooler. The GPU water cooler has been completely overhauled technically. To optimize cooling performance, the distances between the cooler and the components of the PCB were redefined and tested. The water flow was simulated using the most advanced software and verified through practical tests. These extensive tests allowed for improvements to the cooler base and jetplate, ensuring the best possible cooling performance for the new Nvidia GeForce RTX generation. Compatibility: - Gigabyte GeForce RTX™ 5070 Ti GAMING OC 16G (GV-N507TGAMING OC-16GD) - Gigabyte GeForce RTX™ 5070 Ti WINDFORCE OC SFF 16G (GV-N507TWF3OC-16GD) - Gigabyte AORUS GeForce RTX™ 5080 MASTER 16G (GV-N5080AORUS M-16GD) - Gigabyte GeForce RTX™ 5080 AERO OC SFF 16G (GV-N5080AERO OC-16GD) - Gigabyte GeForce RTX™ 5080 GAMING OC 16G (GV-N5080GAMING OC-16GD) - Gigabyte GeForce RTX™ 5080 WINDFORCE OC SFF 16G (GV-N5080WF3OC-16GD) - Gigabyte GeForce RTX™ 5080 WINDFORCE SFF 16G (GV-N5080WF3-16GD) Technical data coolerDimensions total (L x W x H)205,50x 140,93 x 34,19mmMaterial coolerchrome-plated copperMaterial cooler topAcrylicMaterial terminalNylonMaterial Connection threadBrassMax working temperature60°CPressure tested0,8 barThreads4 x G1/4"Thickness cooler bottom3,25mmThickness cooling fins0,4mmDistance cooling fins0,4mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs8ColortransparentTechnical data backplateDimensions (L x W x H)205,50 x 112,40 x 6mmThickness backplate without spacers3mmMaterialAluminiumWarranty: 3 years???? Warranty Terms

The Alphacool Core Heat Gun enables the bending of HardTubes. It is simple and versatile. Compared to the Apex version, it is a cheaper alternative that does not have an LCD display.Easy handlingA switch on the handle allows the air speed of the Core Heat Gun to be regulated in two stages, while a rotary control allows the temperature to be adjusted. The device is designed for use in the hand or when switched off. Three different nozzle attachments for different areas of application are included in the scope of delivery.Maximum safetyThe Alphacool Core Heat Gun has feet that ensure a firm and secure stand, allowing HardTubes to be bent using both hands. The ventilation slots provide overload protection. As a temperature of up to 600°C can be reached, extreme caution is still required. Technical dataDimensions (L x W x H)250 x 75 x 190 mmMaterialPlastic / metalWeight520gCable length160cmTemperature control8 levels + Max PowerTemperature range60-600°CWind speed control2 levelsAir Output250-500L/minVoltage230V ACMax. power consumption2000WFrequency50/60 HzOperating Temperature-10°C ~ 40°CStorage Temperature-20°C ~ 65°CRelative Humidity45% ~ 85%Colorblue

Wasserkühler für M.2-2280-SSDs, aus Kupfer mit Acryl-Deckel, mit Wärmeleitpads, integrierte RGB-Beleuchtung

All-in-one water cooling, 360 mm radiator, 3x 120 mm PWM fans, integrated RGB lighting

With the Core Ocean AiO, Alphacool presents an all-in-one solution that, thanks to its excellent price-performance ratio, enables entry into performance-oriented CPU water cooling. The difference to the Eisbaer CPU AiO is that the Ocean All-in-One is not expandable. Adding further components such as GPU coolers, radiators or expansion tanks is not intended here. But also not necessary! The choice of components and the design of the Core Ocean enable a long service life with low maintenance for water cooling of all common mainstream sockets from AMD and Intel.Aluminium RadiatorCompared to Alphacool's full copper models, the T38 aluminium radiator has additional cooling channels. This technical design allows a significant increase in cooling capacity without restricting the water flow within the radiator. Due to the low height of 38mm, the radiator with single-sided fan assembly fits into the tightest case and enables high-performance water cooling of the CPU.Core fanThe fan can be regulated from 0 to 2500 rpm via the 4-pin PWM connection. The cable is 40cm long. This allows the fan to be connected to the mainboard or a special controller without the need for additional adapter cables or extensions. At 2500 rpm, it provides an air flow of 62.8 CFM, together with a high static pressure of 2.13mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system.Cooler & PumpAs with all Alphacool products, the radiator base is made of copper and is equipped with very fine cooling fins distributed over the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimised so that all areas of the cooler base are cooled evenly. The cooler is compatible with all common mainstream sockets from AMD and Intel. The built-in pump has a speed range of 2500 - 3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the mainboard or to an external controller via the existing 4-pin fan connector. This allows the speed range of the pump to be controlled and monitored.Hoses & ConnectionsThe FEP hoses are 40cm long, sleeved and very flexible. The rotatable 360° connections to the cooler and to the radiator are permanently installed and cannot be replaced. However, the combination of hoses and connectors allows a very variable positioning of the AiO even in the tightest PC case.Illumination12 digitally addressable 5V RGB LEDs are installed in the pump housing, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector.Thermal compoundThe thermal paste included in the delivery has a thermal conductivity of 7.5 W/mK. The thermal grease does not harden, is particularly suitable for high contact pressures and can be applied perfectly due to the optimally selected viscosity. Compatibility:AMD: AM4 / AM5Intel: LGA 1150 / LGA 1200 / LGA 1700 / LGA 1851 / LGA 2066 Technical data radiatorL x W x H153 x 120 x 38mmMaterial cooling fins, channels & prechamber3003 AluminiumMaterial outer housing & threads3003 AluminiumFins per Inch19Fan size120mmFan slots1 one-sided / 2 double-sidedColorblackTechnical data fansL x W x H120 x 120 x 25mmBearing Typehydraulic BearingRated VoltageDC 12VOperating VoltageDC 7-14VStart-up Voltage7VRated Current0.23 (Max. 0.4) ARated Power2.76 (Max. 4.8) WRated Speed0 - 2500rpm/min (±10%)Max. Air Flow62.8CFMMax.Static Pressure2.13mm-H2ONoise level (rated voltage, mute room, distance 1m)33.0 (Max. 34.3) dBAMTBF50000hrs at 25°CSpeed Control ModePWMConnection & control4-pin PWM (cable 40cm)Auto-RestartyesTachometer OutputyesColorblackTechnical data cooler & pumpL x W x H70,2 x 70,2 x 46mmMaterial cooler bottomcopperMaterial pump housingSynthetic material (ABS+PC)Fin structure cooler bottom0,1 x 0,1mmMaterial pump bearing & shaftceramicsStarting voltage> DC 6VRated power7.1WNoise level35DbRated Current0.59A (±10% MAX)Speed2500~3500 (±10% RPM)Power supply Digital aRGB3-pin 5V (male & female, cable length 30cm)Number of aRGB LEDs12Power supply pump4-Pin JST (Kabellänge 30cm)Technical data tubesMaterialFEP, black with weave coverLength350mmWarranty: 3 years???? Warranty Terms

With the Core Ocean AiO, Alphacool presents an all-in-one solution that, thanks to its excellent price-performance ratio, enables entry into performance-oriented CPU water cooling. The difference to the Eisbaer CPU AiO is that the Ocean All-in-One is not expandable. Adding further components such as GPU coolers, radiators or expansion tanks is not intended here. But also not necessary! The choice of components and the design of the Core Ocean enable a long service life with low maintenance for water cooling of all common mainstream sockets from AMD and Intel.Aluminium RadiatorCompared to Alphacool's full copper models, the T38 aluminium radiator has additional cooling channels. This technical design allows a significant increase in cooling capacity without restricting the water flow within the radiator. Due to the low height of 38mm, the radiator with single-sided fan assembly fits into the tightest case and enables high-performance water cooling of the CPU.Core fanThe fan can be regulated from 0 to 2500 rpm via the 4-pin PWM connection. The cable is 40cm long. This allows the fan to be connected to the mainboard or a special controller without the need for additional adapter cables or extensions. At 2500 rpm, it provides an air flow of 62.8 CFM, together with a high static pressure of 2.13mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system.Cooler & PumpAs with all Alphacool products, the radiator base is made of copper and is equipped with very fine cooling fins distributed over the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimised so that all areas of the cooler base are cooled evenly. The cooler is compatible with all common mainstream sockets from AMD and Intel. The built-in pump has a speed range of 2500 - 3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the mainboard or to an external controller via the existing 4-pin fan connector. This allows the speed range of the pump to be controlled and monitored.Hoses & ConnectionsThe FEP hoses are 40cm long, sleeved and very flexible. The rotatable 360° connections to the cooler and to the radiator are permanently installed and cannot be replaced. However, the combination of hoses and connectors allows a very variable positioning of the AiO even in the tightest PC case.Illumination12 digitally addressable 5V RGB LEDs are installed in the pump housing, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector.Thermal compoundThe thermal paste included in the delivery has a thermal conductivity of 7.5 W/mK. The thermal grease does not harden, is particularly suitable for high contact pressures and can be applied perfectly due to the optimally selected viscosity. Compatibility:AMD: AM4 / AM5Intel: LGA 1150 / LGA 1200 / LGA 1700 / LGA 1851 / LGA 2066 Technical data radiatorL x W x H279 x 120 x 38mmMaterial cooling fins, channels & prechamber3003 AluminiumMaterial outer housing & threads3003 AluminiumFins per Inch19Fan size120mmFan slots2 one-sided / 4 double-sidedColorblackTechnical data fansL x W x H120 x 120 x 25mmBearing Typehydraulic BearingRated VoltageDC 12VOperating VoltageDC 7-14VStart-up Voltage7VRated Current0.23 (Max. 0.4) ARated Power2.76 (Max. 4.8) WRated Speed0 - 2500rpm/min (±10%)Max. Air Flow62.8CFMMax.Static Pressure2.13mm-H2ONoise level (rated voltage, mute room, distance 1m)33.0 (Max. 34.3) dBAMTBF50000hrs at 25°CSpeed Control ModePWMConnection & control4-pin PWM (cable 40cm)Auto-RestartyesTachometer OutputyesColorblackTechnical data cooler & pumpL x W x H70,2 x 70,2 x 46mmMaterial cooler bottomcopperMaterial pump housingSynthetic material (ABS+PC)Fin structure cooler bottom0,1 x 0,1mmMaterial pump bearing & shaftceramicsStarting voltage> DC 6VRated power7.1WNoise level35DbRated Current0.59A (±10% MAX)Speed2500~3500 (±10% RPM)Power supply Digital aRGB3-pin 5V (male & female, cable length 30cm)Number of aRGB LEDs12Power supply pump4-Pin JST (Kabellänge 30cm)Technical data tubesMaterialFEP, black with weave coverLength400mmWarranty: 3 years???? Warranty Terms

With the Core Ocean AiO, Alphacool presents an all-in-one solution that, thanks to its excellent price-performance ratio, enables entry into performance-oriented CPU water cooling. The difference to the Eisbaer CPU AiO is that the Ocean All-in-One is not expandable. Adding further components such as GPU coolers, radiators or expansion tanks is not intended here. But also not necessary! The choice of components and the design of the Core Ocean enable a long service life with low maintenance for water cooling of all common mainstream sockets from AMD and Intel. Aluminium Radiator Compared to Alphacool's full copper models, the T38 aluminium radiator has additional cooling channels. This technical design allows a significant increase in cooling capacity without restricting the water flow within the radiator. Due to the low height of 38mm, the radiator with single-sided fan assembly fits into the tightest case and enables high-performance water cooling of the CPU. Core fan The fan can be regulated from 0 to 2000 rpm via the 4-pin PWM connection. The cable is 40cm long. This allows the fan to be connected to the mainboard or a special controller without the need for additional adapter cables or extensions. At 2000 rpm, it provides an air flow of 92.3 CFM, together with a high static pressure of 2.53mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system. Cooler & Pump As with all Alphacool products, the radiator base is made of copper and is equipped with very fine cooling fins distributed over the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimised so that all areas of the cooler base are cooled evenly. The cooler is compatible with all common mainstream sockets from AMD and Intel. The built-in pump has a speed range of 2500 - 3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the mainboard or to an external controller via the existing 4-pin fan connector. This allows the speed range of the pump to be controlled and monitored. Hoses & Connections The FEP hoses are 40cm long, sleeved and very flexible. The rotatable 360° connections to the cooler and to the radiator are permanently installed and cannot be replaced. However, the combination of hoses and connectors allows a very variable positioning of the AiO even in the tightest PC case. Illumination 12 digitally addressable 5V RGB LEDs are installed in the pump housing, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector. Thermal compound The thermal paste included in the delivery has a thermal conductivity of 7.5 W/mK. The thermal grease does not harden, is particularly suitable for high contact pressures and can be applied perfectly due to the optimally selected viscosity. Compatibility: Intel: LGA 115x / LGA 1200 / LGA 1700 / LGA 2066 AMD: AM4 / AM5 Technical data radiator L x W x H 315 x 140 x 38mm Material cooling fins, channels & prechamber 3003 Aluminium Material outer housing & threads 3003 Aluminium Fins per Inch 20 Fan size 140mm Fan slots 2 one-sided / 4 double-sided Color black Technical data fans L x W x H 140 x 140 x 25mm Bearing Type hydraulic Bearing Rated Voltage DC 12V Operating Voltage DC 7-14V Start-up Voltage 7V Rated Current 0.26 (Max. 0.3) A Rated Power 3.12 (Max. 3.6) W Rated Speed 0 - 2000rpm/min (±10%) Max. Air Flow 92.3CFM Max.Static Pressure 2.53mm-H2O Noise level (rated voltage, mute room, distance 1m) 34.3 (Max. 36) dBA MTBF 50000hrs at 25°C Speed Control Mode PWM Connection & control 4-pin PWM (cable 40cm) Auto-Restart yes Tachometer Output yes Color black Technical data cooler & pump L x W x H 70,2 x 70,2 x 46mm Material cooler bottom copper Material pump housing Synthetic material (ABS+PC) Fin structure cooler bottom 0,1 x 0,1mm Material pump bearing & shaft ceramics Starting voltage > DC 6V Rated power 7.1W Noise level 35Db Rated Current 0.59A (±10% MAX) Speed 2500~3500 (±10% RPM) Power supply Digital aRGB 3-pin 5V (male & female, cable length 30cm) Number of aRGB LEDs 12 Power supply pump 4-Pin JST (Kabellänge 30cm) Technical data tubes Material FEP, black with weave cover Length 400mm

With the Core Ocean AiO, Alphacool presents an all-in-one solution that, thanks to its excellent price-performance ratio, enables entry into performance-oriented CPU water cooling. The difference to the Eisbaer CPU AiO is that the Ocean All-in-One is not expandable. Adding further components such as GPU coolers, radiators or expansion tanks is not intended here. But also not necessary! The choice of components and the design of the Core Ocean enable a long service life with low maintenance for water cooling of all common mainstream sockets from AMD and Intel.Aluminium RadiatorCompared to Alphacool's full copper models, the T38 aluminium radiator has additional cooling channels. This technical design allows a significant increase in cooling capacity without restricting the water flow within the radiator. Due to the low height of 38mm, the radiator with single-sided fan assembly fits into the tightest case and enables high-performance water cooling of the CPU.Core fanThe fan can be regulated from 0 to 2000 rpm via the 4-pin PWM connection. The cable is 40cm long. This allows the fan to be connected to the mainboard or a special controller without the need for additional adapter cables or extensions. At 2000 rpm, it provides an air flow of 92.3 CFM, together with a high static pressure of 2.53mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system.Cooler & PumpAs with all Alphacool products, the radiator base is made of copper and is equipped with very fine cooling fins distributed over the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimised so that all areas of the cooler base are cooled evenly. The cooler is compatible with all common mainstream sockets from AMD and Intel. The built-in pump has a speed range of 2500 - 3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the mainboard or to an external controller via the existing 4-pin fan connector. This allows the speed range of the pump to be controlled and monitored.Hoses & ConnectionsThe FEP hoses are 40cm long, sleeved and very flexible. The rotatable 360° connections to the cooler and to the radiator are permanently installed and cannot be replaced. However, the combination of hoses and connectors allows a very variable positioning of the AiO even in the tightest PC case.Illumination12 digitally addressable 5V RGB LEDs are installed in the pump housing, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector.Thermal compoundThe thermal paste included in the delivery has a thermal conductivity of 7.5 W/mK. The thermal grease does not harden, is particularly suitable for high contact pressures and can be applied perfectly due to the optimally selected viscosity. Compatibility:AMD: AM4 / AM5Intel: LGA 1150 / LGA 1200 / LGA 1700 / LGA 1851 / LGA 2066 Technical data radiatorL x W x H460 x 140 x 38mmMaterial cooling fins, channels & prechamber3003 AluminiumMaterial outer housing & threads3003 AluminiumFins per Inch20Fan size140mmFan slots3 one-sided / 6 double-sidedColorblackTechnical data fansL x W x H140 x 140 x 25mmBearing Typehydraulic BearingRated VoltageDC 12VOperating VoltageDC 7-14VStart-up Voltage7VRated Current0.26 (Max. 0.3) ARated Power3.12 (Max. 3.6) WRated Speed0 - 2000rpm/min (±10%)Max. Air Flow92.3CFMMax.Static Pressure2.53mm-H2ONoise level (rated voltage, mute room, distance 1m)34.3 (Max. 36) dBAMTBF50000hrs at 25°CSpeed Control ModePWMConnection & control4-pin PWM (cable 40cm)Auto-RestartyesTachometer OutputyesColorblackTechnical data cooler & pumpL x W x H70,2 x 70,2 x 46mmMaterial cooler bottomcopperMaterial pump housingSynthetic material (ABS+PC)Fin structure cooler bottom0,1 x 0,1mmMaterial pump bearing & shaftceramicsStarting voltage> DC 6VRated power7.1WNoise level35DbRated Current0.59A (±10% MAX)Speed2500~3500 (±10% RPM)Power supply Digital aRGB3-pin 5V (male & female, cable length 30cm)Number of aRGB LEDs12Power supply pump4-Pin JST (Kabellänge 30cm)Technical data tubesMaterialFEP, black with weave coverLength400mmWarranty: 3 years???? Warranty Terms

Core Push Mounting Kit for water cooling, allows easy installation of Alphacool distro plates, can be mounted on radiators or in the case

Core Push Mounting Kit for water cooling systems, allows easy mounting of Alphacool distro plates, can be mounted on radiators or in the case.

Core Push Mounting Kit for water cooling, enables easy installation of Alphacool distro plates, can be mounted on radiators or in the case

140 mm fan for case, PWM control, quiet and efficient

Alphacool's Core product series is characterized by high quality, outstanding performance and the uniform and functional design language.The copper cooler which, like the end terminal, is milled from a single piece of copper and is the core of this cooler. The fine workmanship, paired with the hard and resistant chrome plating covering the entire copper cooler, meet the highest quality standards. The chrome-plated brass G1/4" threads integrated on both sides stand out visually from the terminal. They are a central feature of the new design language that will be evident in all products in the Core series.The aluminum backplate adapted to the design, together with the terminal, makes up the entire unit and enhances the back of the cooler with a clean and homogeneous look. The lighting consists of digitally addressable RGB LEDs, which illuminate the entire cooler evenly and effectively.The technical advancements can be seen in the water supply to the jet plate as well as in the optimization of the jet plate itself. The jet plate has been completely redesigned based on many simulations and practical tests in cooperation with board partners. The fin thickness and spacing have been enhanced, the cooling surface has been increased and the water flow to the core components with the greatest heat output has been optimized. The enclosed special soft thermal pads with up to 7 W/mK adapt perfectly to even the smallest tolerances. Compatibility:- Gainward GeForce RTX 4090 Phantom GS, 24GB GDDR6X (3413)- Gainward GeForce RTX 4090 Phantom, 24GB GDDR6X (3390)- Palit GeForce RTX 4090 GameRock OC, 24GB GDDR6X (NED4090S19SB-1020G)- Palit GeForce RTX 4090 GameRock, 24GB GDDR6X (NED4090019SB-1020G) Technical data coolerDimensions (L x W x H)217,91 x 146,99 x 32,12mmMaterial coolerchrome-plated copperMaterial cooler topacrylicMax working temperature60°CPressure tested0,8 barThreads4 x G1/4"Thickness cooler bottom11,3mmThickness cooling fins0,4mmDistance cooling fins0,4mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs11ColortransparentTechnical data backplateDimensions (L x W x H)217,91 x 123,69 x 5mmMaterialaluminiumColorblackWarranty: 3 years???? Warranty Terms

Full-block water cooler for Gigabyte GeForce RTX 4090 Gaming-OC/Aorus Master graphics cards, nickel-plated copper heatsink, with backplate

Alphacool introduces its new series of graphics card water coolers for the latest Nvidia GeForce RTX generation. Part of the Core product series, these coolers combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers deliver outstanding cooling performance.At the heart of the cooler is a copper block, precisely milled from a single piece and complemented by a precisely crafted brass terminal with a nylon cover. A chrome finish enhances the copper cooler’s durability and provides a smoother, more radiant surface than traditional nickel plating.The visual design of the GPU water cooler has been slightly modified. A new highlight is the Core emblem placed above the jetplate, which emphasizes its affiliation with the Core series and visually enhances the design. The series continues to feature high-quality brass connectors that ensure optimal quality and safety. The specially adapted aluminum backplate covers the entire backside of the copper cooler, ensuring a clear and uniform appearance. The acrylic, combined with aRGB lighting, allows for even and impressive illumination of the entire cooler.The GPU water cooler has been completely overhauled technically. To optimize cooling performance, the distances between the cooler and the components of the PCB were redefined and tested. The water flow was simulated using the most advanced software and verified through practical tests. These extensive tests allowed for improvements to the cooler base and jetplate, ensuring the best possible cooling performance for the new Nvidia GeForce RTX generation. Compatibility:- Inno3D Inno3D GeForce RTX™ 5080 iChill Frostbite (C50803-16D7X-1760FB)- Inno3D Inno3D GeForce RTX™ 5080 iChill X3 (C50803-16D7X-176069H)- Inno3D Inno3D GeForce RTX™ 5080 X3 (N50803-16D7-176068N)- Inno3D Inno3D GeForce RTX™ 5080 X3 OC (N50803-16D7X-17603930)- Inno3D Inno3D GeForce RTX™ 5080 X3 OC White (N50803-16D7X-17605211) Technical data coolerDimensions total (L x W x H)160 x 124,07 x 34,19mmMaterial coolerchrome-plated copperMaterial cooler topAcrylicMaterial terminalAcetalMaterial Connection threadBrassMax working temperature60°CPressure tested0,8 barThreads4 x G1/4"Thickness cooler bottom3,25mmThickness cooling fins0,4mmDistance cooling fins0,4mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs7ColortransparentTechnical data backplateDimensions (L x W x H)160 x 95,36 x 6mmThickness backplate without spacers3mmMaterialAluminiumWarranty: 3 years???? Warranty Terms

Alphacool presents its new graphics card water coolers for the latest Nvidia GeForce RTX generation. They are part of the Core product series and combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers offer outstanding cooling performance. At the center of the cooler is the one-piece milled copper cooler, complemented by a precision-machined brass terminal with a nylon cover. Chrome plating makes the copper cooler more durable and provides a smoother, brighter surface than conventional nickel plating. The visual design of the GPU water cooler has been changed only slightly. A special highlight is the newly added Core emblem above the jet plate, which underscores its affiliation with the Core series and visually enhances the design. The series continues to rely on high-quality brass fittings, guaranteeing optimal quality and safety. The specially adapted aluminum backplate covers the entire rear of the copper cooler and ensures a clean and uniform appearance. The acrylic, in combination with the aRGB lighting, enables even and impressive illumination of the entire cooler. Technically, the GPU water cooler has been completely redesigned. To optimize cooling performance, the gaps between the cooler and the PCB components were redefined and tested. The water flow was simulated using state-of-the-art software and verified in practical tests. These extensive tests enabled improvements to the cooler base and nozzle to ensure the best possible cooling performance for the new Nvidia GeForce RTX generation. Compatibility: - Gainward GeForce RTX™ 5090 Phantom (4878 / NE75090019R5-GB2020P) - Gainward GeForce RTX™ 5090 Phantom GS (4861 / NE75090S19R5-GB2020P) - Palit GeForce RTX™ 5090 GameRock (NE75090019R5-GB2020G) - Palit GeForce RTX™ 5090 GameRock OC (NE75090S19R5-GB2020G) Technical data cooler Complete dimensions (L x W x H) 214.40 x 153.37 x 34.38mm Radiator base material chrome-plated copper Material radiator top Acrylic Material Terminal nylon Material connection thread Brass Maximum working temperature 60°C Pressure tested 0.8 bar Connections 4 x G1/4" Thickness of radiator base 3.25mm Thick cooling fins 0.4mm Distance between cooling fins 0.4mm lighting digital aRGB LEDs Power connection digital aRGB LEDs 3-pin JST Voltage digital aRGB LEDs 5V Number of digital aRGB LEDs 9 Color transparent Technical data backplate Dimensions (L x W x H) 214.40 x 124.80 x 6mm Thick backplate without spacers 3mm material aluminum Warranty: 3 years

Alphacool's Core product series is characterized by high quality, outstanding performance and the uniform and functional design language.The copper cooler which, like the end terminal, is milled from a single piece of copper and is the core of this cooler. The fine workmanship, paired with the hard and resistant chrome plating covering the entire copper cooler, meet the highest quality standards. The chrome-plated brass G1/4" threads integrated on both sides stand out visually from the terminal. They are a central feature of the new design language that will be evident in all products in the Core series.The aluminum backplate adapted to the design, together with the terminal, makes up the entire unit and enhances the back of the cooler with a clean and homogeneous look. The lighting consists of digitally addressable RGB LEDs, which illuminate the entire cooler evenly and effectively.The technical advancements can be seen in the water supply to the jet plate as well as in the optimization of the jet plate itself. The jet plate has been completely redesigned based on many simulations and practical tests in cooperation with board partners. The fin thickness and spacing have been enhanced, the cooling surface has been increased and the water flow to the core components with the greatest heat output has been optimized. The enclosed special soft thermal pads with up to 7 W/mK adapt perfectly to even the smallest tolerances. Compatibility:- AMD Radeon RX 7900 XTX, 24GB GDDR6- ASRock Radeon RX 7900 XTX, 24GB GDDR6- Asus Radeon RX 7900 XTX, RX7900XTX-24G, 24GB GDDR6 (90YV0IT0-U0NM00)- Biostar Radeon RX 7900 XTX, 24GB GDDR6 (VA7906AEF4)- Gigabyte Radeon RX 7900 XTX 24G, 24GB GDDR6 (GV-R79XTX-24GC-B)- PowerColor Radeon RX 7900 XTX, 24GB GDDR6 (RX 7900 XTX 24G)- XFX Radeon RX 7900 XTX, 24GB GDDR6 (RX-79XMBABF9) Technical data coolerDimensions (L x W x H)269 x 135 x 32,15mmMaterial coolerchrome-plated copperMaterial cooler topacrylicMax working temperature60°CPressure tested0,8 barThreads4 x G1/4"Thickness cooler bottom11,3mmThickness cooling fins0,4mmDistance cooling fins0,4mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs15ColortransparentTechnical data backplateDimensions (L x W x H)269 x 221 x 5mmMaterialaluminiumColorblackWarranty: 3 years???? Warranty Terms

Alphacool introduces its new series of graphics card water coolers for the latest AMD Radeon RX generation. Part of the Core product series, these coolers combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers deliver outstanding cooling performance.At the heart of the cooler is a copper block, precisely milled from a single piece and complemented by a precisely crafted brass terminal with a nylon cover. A chrome finish enhances the copper cooler’s durability and provides a smoother, more radiant surface than traditional nickel plating.The visual design of the GPU water cooler has been slightly modified. A new highlight is the Core emblem placed above the jetplate, which emphasizes its affiliation with the Core series and visually enhances the design. The series continues to feature high-quality brass connectors that ensure optimal quality and safety. The specially adapted aluminum backplate covers the entire backside of the copper cooler, ensuring a clear and uniform appearance. The acrylic, combined with aRGB lighting, allows for even and impressive illumination of the entire cooler.The GPU water cooler has been completely overhauled technically. To optimize cooling performance, the distances between the cooler and the components of the PCB were redefined and tested. The water flow was simulated using the most advanced software and verified through practical tests. These extensive tests allowed for improvements to the cooler base and jetplate, ensuring the best possible cooling performance for the new AMD Radeon RX generation. Compatibility:- PowerColor Hellhound AMD Radeon™ RX 9070 16GB GDDR6- Sapphire PULSE AMD Radeon™ RX 9070 GPU- PowerColor Hellhound AMD Radeon™ RX 9070 XT 16GB GDDR6- PowerColor Hellhound Spectral White Radeon RX 9070 XT 16GB GDDR6 (RX9070XT 16G-L/OC/WHITE)- PowerColor Reaper AMD Radeon™ RX 9070 XT 16GB GDDR6- Sapphire PULSE AMD Radeon™ RX 9070 XT GPU- Sapphire PURE AMD Radeon™ RX 9070 XT GPU Technical data coolerDimensions total (L x W x H)197,00 x 127,33 x 33,35mmMaterial coolerchrome-plated copperMaterial cooler topAcrylicMaterial terminalNylonMaterial Connection threadBrassMax working temperature60°CPressure tested0,8 barThreads4 x G1/4"Thickness cooler bottom3,25mmThickness cooling fins0,4mmDistance cooling fins0,4mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs10ColortransparentTechnical data backplateDimensions (L x W x H)197,00 x 98,80 x 6,00mmThickness backplate without spacers3mmMaterialAluminiumWarranty: 3 years???? Warranty Terms

Alphacool introduces its new series of graphics card water coolers for the latest AMD Radeon RX generation. Part of the Core product series, these coolers combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers deliver outstanding cooling performance.At the heart of the cooler is a copper block, precisely milled from a single piece and complemented by a precisely crafted brass terminal with a nylon cover. A chrome finish enhances the copper cooler’s durability and provides a smoother, more radiant surface than traditional nickel plating.The visual design of the GPU water cooler has been slightly modified. A new highlight is the Core emblem placed above the jetplate, which emphasizes its affiliation with the Core series and visually enhances the design. The series continues to feature high-quality brass connectors that ensure optimal quality and safety. The specially adapted aluminum backplate covers the entire backside of the copper cooler, ensuring a clear and uniform appearance. The acrylic, combined with aRGB lighting, allows for even and impressive illumination of the entire cooler.The GPU water cooler has been completely overhauled technically. To optimize cooling performance, the distances between the cooler and the components of the PCB were redefined and tested. The water flow was simulated using the most advanced software and verified through practical tests. These extensive tests allowed for improvements to the cooler base and jetplate, ensuring the best possible cooling performance for the new AMD Radeon RX generation. Compatibility:- XFX Mercury AMD Radeon RX 9070XT OC Gaming Edition with RGB (RX-97TRGBBB9)- XFX Mercury AMD Radeon RX 9070XT OC Magnetic Air Edition with RGB (RX-97TMARGB9)- XFX Mercury AMD Radeon RX 9070XT OC White Gaming Edition with RGB (97TRGBBW9) Technical data coolerDimensions total (L x W x H)236,10 x 127,30 x 33,34mmMaterial coolerchrome-plated copperMaterial cooler topAcrylicMaterial terminalNylonMaterial Connection threadBrassMax working temperature60°CPressure tested0,8 barThreads4 x G1/4"Thickness cooler bottom3,25mmThickness cooling fins0,4mmDistance cooling fins0,4mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs10ColortransparentTechnical data backplateDimensions (L x W x H)236,10 x 98,80 x 6,00mmThickness backplate without spacers3mmMaterialAluminiumWarranty: 3 years???? Warranty Terms

Alphacool Core RX 9070 XT Nitro+ with Backplate Alphacool presents the new graphics card water coolers for the latest AMD Radeon RX generation. They are part of the Core product series and combine top quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers deliver outstanding cooling performance.At the center of the cooler is a copper water block milled from a single piece and complemented by a precisely manufactured brass terminal with a nylon cover. A chrome plating makes the copper water block more resistant and provides a smoother and shinier surface than conventional nickel plating.The visual design of the GPU water cooler has only been slightly changed. A particular highlight is the newly added Core emblem above the jet plate, emphasizing its belonging to the Core series and enhancing the design visually. The series continues to rely on premium brass fittings that guarantee optimal quality and safety. The specially fitted aluminum backplate covers the entire backside of the copper cooler, providing a clean and uniform appearance. The acrylic, in combination with the aRGB lighting, enables even and impressive illumination of the entire cooler.Technically, the GPU water cooler has been completely revised. To optimize cooling performance, the clearances between the cooler and the PCB components have been redefined and tested. The water flow has been simulated with state-of-the-art software and checked in practical tests. These extensive tests made it possible to improve the cooler base and the nozzle to ensure the best possible cooling performance for the new AMD Radeon RX generation. Compatibility:- Sapphire NITRO+ AMD Radeon™ RX 9070 GPU- Sapphire NITRO+ AMD Radeon™ RX 9070 XT GPU Technical Data Cooler Dimensions complete (L x W x H) 222.20 x 137.97 x 33.52mm Material cooler base chrome-plated copper Material cooler top acrylic Material terminal nylon Material fitting thread brass Max. operating temperature 60°C Pressure tested 0.8 bar Fittings 4 x G1/4" Cooler base thickness 3.25mm Cooling fin thickness 0.4mm Cooling fin spacing 0.4mm Lighting digital aRGB LEDs Power connection digital aRGB LEDs 3-pin JST Voltage digital aRGB LEDs 5V Number of digital aRGB LEDs 10 Color transparent Technical Data Backplate Dimensions (L x W x H) 222.20 x 109.40 x 6.00mm Backplate thickness without spacers 3mm Material aluminum Warranty: 3 years? Warranty terms

Alphacool introduces its new series of graphics card water coolers for the latest AMD Radeon RX generation. Part of the Core product series, these coolers combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers deliver outstanding cooling performance.At the heart of the cooler is a copper block, precisely milled from a single piece and complemented by a precisely crafted brass terminal with a nylon cover. A chrome finish enhances the copper cooler’s durability and provides a smoother, more radiant surface than traditional nickel plating.The visual design of the GPU water cooler has been slightly modified. A new highlight is the Core emblem placed above the jetplate, which emphasizes its affiliation with the Core series and visually enhances the design. The series continues to feature high-quality brass connectors that ensure optimal quality and safety. The specially adapted aluminum backplate covers the entire backside of the copper cooler, ensuring a clear and uniform appearance. The acrylic, combined with aRGB lighting, allows for even and impressive illumination of the entire cooler.The GPU water cooler has been completely overhauled technically. To optimize cooling performance, the distances between the cooler and the components of the PCB were redefined and tested. The water flow was simulated using the most advanced software and verified through practical tests. These extensive tests allowed for improvements to the cooler base and jetplate, ensuring the best possible cooling performance for the new AMD Radeon RX generation. Compatibility:- XFX Swift AMD Radeon RX 9070 OC Triple Fan Gaming Edition (RX-97SWFB3B9)- XFX Swift AMD Radeon RX 9070 OC White Triple Fan Gaming Edition (RX-97SWFB3W9)- XFX Quicksilver AMD Radeon RX 9070XT White Gaming Edition (RX-97TQICKW9)- XFX Swift AMD Radeon RX 9070XT Triple Fan Gaming Edition (RX-97TSWF3B9)- XFX Swift AMD Radeon RX 9070XT White Triple Fan Gaming Edition (RX-97TSWF3W9) Technical data coolerDimensions total (L x W x H)195,60 x 127,30 x 33,35mmMaterial coolerchrome-plated copperMaterial cooler topAcrylicMaterial terminalNylonMaterial Connection threadBrassMax working temperature60°CPressure tested0,8 barThreads4 x G1/4"Thickness cooler bottom3,25mmThickness cooling fins0,4mmDistance cooling fins0,4mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs10ColortransparentTechnical data backplateDimensions (L x W x H)195,60 x 98,80 x 6,00mmThickness backplate without spacers3mmMaterialAluminiumWarranty: 3 years???? Warranty Terms

Alphacool Core RX 9070 XT Taichi with Backplate Alphacool presents the new graphics card water coolers for the latest AMD Radeon RX generation. They are part of the Core product series and combine the highest quality with exceptional performance. Through optimized technical design, these GPU coolers provide outstanding cooling performance.At the heart of the cooler is a copper cooling plate milled from a single piece, complemented by a precisely manufactured brass connection terminal with a nylon cover. Chrome plating makes the copper cooler more durable and provides a smoother and more radiant surface compared to standard nickel plating.The visual design of the GPU water cooler has been changed only slightly. A particular highlight is the newly added Core emblem above the jet plate, which emphasizes its affiliation to the Core series and visually enhances the design. The series continues to rely on high-quality brass fittings that guarantee optimal quality and safety. The specially adapted aluminum backplate covers the entire backside of the copper cooler, ensuring a clear and unified look. The acrylic, combined with the aRGB lighting, allows for uniform and impressive illumination of the entire cooler.Technically, the GPU water cooler has been completely reworked. To optimize cooling performance, the distances between the cooler and the components of the PCB have been newly defined and tested. The water flow was simulated with state-of-the-art software and verified through practical tests. Through these extensive tests, the base of the cooler and the nozzle were improved to guarantee the best possible cooling performance for the new AMD Radeon RX generation. Compatibility:- ASRock AMD Radeon™ RX 9070 XT Taichi 16GB OC Technical Data Cooler Dimensions complete (L x W x H) 217.10 x 127.37 x 33.05mm Cooler base material chrome-plated copper Cooler top material acrylic Terminal material nylon Connection thread material brass Maximum operating temperature 60°C Pressure tested 0.8 bar Connections 4 x G1/4" Cooler base thickness 3.25mm Cooling fin thickness 0.4mm Cooling fin spacing 0.4mm Lighting digital aRGB LEDs Digital aRGB LED power connection 3-Pin JST Digital aRGB LED voltage 5V Number of digital aRGB LEDs 10 Color transparent Technical Data Backplate Dimensions (L x W x H) 217.10 x 98.80 x 6.00mm Backplate thickness without spacer 3mm Material aluminum Warranty: 3 years? Warranty conditions

Alphacool Core RX 9070 XT TUF + Prime with Backplate Alphacool presents the new graphics card water coolers for the latest AMD Radeon RX generation. They are part of the Core product series, combining the highest quality with exceptional performance. Thanks to optimized technical design, these GPU coolers deliver outstanding cooling performance.At the center of the cooler is a copper heat sink milled from a single piece, complemented by a precisely crafted brass connection terminal with a nylon cover. Chrome plating makes the copper cooler more durable and provides a smoother and more radiant surface than conventional nickel plating.The visual design of the GPU water cooler has only been slightly modified. A prominent highlight is the new Core emblem above the jet plate, emphasizing its affiliation with the Core series and visually enhancing the design. The series continues to rely on high-quality brass fittings, guaranteeing optimal quality and safety. The specially tailored aluminum backplate covers the entire rear of the copper cooler, ensuring a clear and unified look. The acrylic, combined with aRGB lighting, enables even and impressive illumination of the full cooler.Technically, the GPU water cooler has been completely overhauled. To optimize cooling performance, the distances between the cooler and the components of the PCB have been redefined and tested. The water flow was simulated with cutting-edge software and examined in practical trials. Thanks to these extensive tests, the cooler base and nozzle have been improved to guarantee the best possible cooling performance for the new AMD Radeon RX generation. Compatibility:- Asus Prime Radeon™ RX 9070 OC Edition 16GB GDDR6- Asus TUF Gaming Radeon RX 9070 OC Edition 16GB GDDR6- Asus Prime Radeon™ RX 9070 XT OC Edition 16GB GDDR6- Asus TUF Gaming Radeon RX 9070 XT OC Edition 16GB GDDR6 Technical Data Cooler Dimensions Complete (L x W x H) 220.00 x 144.50 x 33.07mm Material Cooler Base chrome-plated copper Material Cooler Top acrylic Material Terminal nylon Material Connection Thread brass Maximum Working Temperature 60°C Pressure Tested 0.8 bar Fittings 4 x G1/4" Cooler Base Thickness 3.25mm Fin Thickness 0.4mm Fin Spacing 0.4mm Lighting digital aRGB LEDs Power Connector digital aRGB LEDs 3-Pin JST Voltage digital aRGB LEDs 5V Number of digital aRGB LEDs 10 Color transparent Technical Data Backplate Dimensions (L x W x H) 220.00 x 116.00 x 6.00mm Backplate Thickness without Spacers 3mm Material aluminum Warranty: 3 years? Warranty Terms

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability. Better than standard thermal pads? The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer. Increased service life! The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance. Versatile use! Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal pad Dimensions (L x W x H): 120 x 20 x 0,5mm Thermal Conductivity (ASTM D5470): 9.0 W/mK (±10%) Hardness (ASTM D2240): 50 (Shore 00) (±15) Working temperature: -50 to ~180°C Volume Resistance (ASTM D257): 1×10¹² Ohm-m Dielectric Breakdown Voltage (ASTM D149): ≥8 KV/mm Density (ASTM D792): 3.2 g/cm³ (±10%) Elongation (ASTM D412): 40% Weight Loss (ASTM E595): less than 1% Flame Rating (UL 94): V-0 Color: pink

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability. Better than standard thermal pads? The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer. Increased service life! The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance. Versatile use! Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal pad Dimensions (L x W x H): 120 x 20 x 1mm Thermal Conductivity (ASTM D5470): 9.0 W/mK (±10%) Hardness (ASTM D2240): 50 (Shore 00) (±15) Working temperature: -50 to ~180°C Volume Resistance (ASTM D257): 1×10¹² Ohm-m Dielectric Breakdown Voltage (ASTM D149): ≥8 KV/mm Density (ASTM D792): 3.2 g/cm³ (±10%) Elongation (ASTM D412): 40% Weight Loss (ASTM E595): less than 1% Flame Rating (UL 94): V-0 Color: pink

Halterung für VPP und D5 Pumpen, kompatibel mit Distroplates der Core-Serie von Alphacool, aus stabilem Aluminium

Wasserkühlungs-Komplettset, beeinhaltet alle notwendigen Teile für eine CPU-Kühlung, inklusive Tubes, für Custom Wasserkühlungen

Wasserkühlungs-Komplettset, beeinhaltet alle notwendigen Teile für eine CPU-Kühlung, inklusive Tubes, für Custom Wasserkühlungen

Wasserkühlungs-Komplettset, beeinhaltet alle notwendigen Teile für eine CPU-Kühlung, inklusive Tubes, für Custom Wasserkühlungen

Wasserkühlungs-Komplettset, beeinhaltet alle notwendigen Teile für eine CPU-Kühlung, inklusive Tubes, für Custom Wasserkühlungen

The Alphacool Core Sensor allows you to show temperature of the fluid inside your cooling loop. Thanks to the available colour display, the temperature can be read either in degrees Celsius or Fahrenheit.Integration made easyThe Alphacool Core temperature sensor is very compact and can be integrated into any loop thanks to its two G1/4" internal threads. It does not matter whether the system is equipped with hoses or hard tubes. Using an adapter with G1/4" external thread, the sensor can be used on all exposed G1/4" threaded openings on the radiator, reservoir, graphics card cooler or CPU cooler.Temperature sensor & displayA classic NTC 10 kOhm thermistor is used as the sensor. The cable of the temperature sensor with a length of approx. 97 cm offers enough possibilities for a comfortable installation. Power is supplied via a 55 cm long cable with one male and one female 4-pin Molex connector. The readable temperature range is between -50 and 110 °C with a possible deviation of 0.1 °C. The display has a colour scale to keep track of critical temperature ranges at any time. Additional software for reading out the temperature ranges is not required.Download kOhm Sensor Table Alphacool Technical dataDimensions display47,8 x 28,2 x 16,7 mmTyp Displaymulti-coloured, indication optionally in ° C or FahrenheitConnection (sensor)G1/4" internal threadSensor typeNTC 10 kOhm thermistorPower connection4-Pol-Molex (12 V)Power cable length550 mmLength sensor cable970 mmTemperature measuring range-50 bis +110 Grad CelsiusColorBlack

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)100 x 100 x 0,5mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)100 x 100 x 1,5mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)100 x 100 x 1mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)100 x 100 x 2mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)100 x 100 x 3mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)120 x 20 x 0,5mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability. Better than standard thermal pads? The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer. Increased service life! The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance. Versatile use! Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal pad Dimensions (L x W x H) 120 x 20 x 1,5mm Thermal Conductivity (ASTM D5470) 6.2 W/mK (±10%) Hardness (ASTM D412) 50 (Shore 00) (±15) Working temperature -50 to ~150°C Volume Resistance (ASTM D257) 1×10¹³ Ohm-m Dielectric Breakdown Voltage (ASTM D149) 6 KV/mm (±10%) Density (ASTM D792) 3.1 g/cm³ (±10%) Elongation (ASTM D412) 50% Weight Loss (ASTM E595) less than 1% Flame Rating (UL 94) V-0 Color blue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability. Better than standard thermal pads? The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer. Increased service life! The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance. Versatile use! Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal pad Dimensions (L x W x H) 120 x 20 x 1mm Thermal Conductivity (ASTM D5470) 6.2 W/mK (±10%) Hardness (ASTM D412) 50 (Shore 00) (±15) Working temperature -50 to ~150°C Volume Resistance (ASTM D257) 1×10¹³ Ohm-m Dielectric Breakdown Voltage (ASTM D149) 6 KV/mm (±10%) Density (ASTM D792) 3.1 g/cm³ (±10%) Elongation (ASTM D412) 50% Weight Loss (ASTM E595) less than 1% Flame Rating (UL 94) V-0 Color blue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 0,5mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 1,5mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue