The most commonly used standard connector for "twisted pair" cables (UTP, STP, etc. type). The body is made of durable transparent plastic. Metal blades.<br/>
Alphacool NexXxoS spacer for ATXP/NVXP water block
Tootekood: 12159GPU Waterblocks
<p>Spare spacer for Alphacool graphics card water blocks. The spacer sits on the bottom of the water block between water block and the graphics card. Equipped with a knurled section, the spacers can easily be inserted and removed by hand.</p> <p><strong>Technical specifications: </strong><br /> Length: 6.3mm<br /> Spacer height: 3mm<br /> Thread: Outer thread M5, inner thread M3</p> <p><strong>Extent of delivery: </strong><br /> 1 Alphacool NexXxos spacer for ATXP/NVXP water blocks</p> <p> </p>
13mm (1/2') fitting G1/8 with O-Ring (High-Flow) - black nickel
Tootekood: 63069Fittings for watercooling
<p>Our trusted fittings are available in a whole new design!</p> <p>Robust high-quality barbed fitting with cylindrical thread (G1/8"). The fitting is suitable for PVC, OU, PA, silicone and PE hoses with an inner diameter of 13mm. With integrated 1/8" Perbunan(r) O-Ring seal.</p> <p><strong>Technical details:</strong><br /> Material: Brass, black nickel coated<br /> Hose size: 13m inner diameter<br /> Thread size: G1/8"</p> <p><strong>Extent of delivery:</strong><br /> Black nickel barbed fitting with O-ring seal</p> <p><strong>Note</strong> for watercooling beginners: <br /> The connectors for hoses(7/16", 3/8",1/2") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp.</p> <p>Overview:<br /> 10mm (3/8") hose clamp: up to 8mm none, from 10mm up required<br /> 10mm (7/16") hose clamp: up to 8mm none, from 10mm up required<br /> 12mm (1/2") hose clamp: up to 11mm none, from 12mm up required<br /> 13mm (1/2") hose clamp: up to 11mm none, from 13mm up required<br /> </p>
The Natec Husky Pup is a thermally conductive paste with high heat conduction parameters and low thermal resistance. Optimal density, wide temperature range in which it will perform, and high thermal conductivity - all of these features will meet your expectations.<br /><br /><strong>Instantly lower temperatures</strong><br />Optimal heat conductivity values from the first second after application. Natec Husky Pup 0.5G does not require preheating. Furthermore, it is characterised by low thermal resistance, no electrical conductivity, and resistance to corrosion.<br /><br /><strong>Easy application</strong><br />Even less experienced users will easily handle the application of Natec Husky Pup 0.5G. This will be facilitated by a handy syringe, with which you can easily apply the appropriate amount of paste.<br /> <ul> <li>Thermal conductivity: 4.63 W/mK</li> <li>Thermal impedance: 0.01 °C-in2/ W</li> <li>Relative density: 3.15</li> <li>Environment temperature: -30–280 °C</li> <li>Weight: 0.5 g</li> </ul>
<p>Standard tubing for virtually all applications. Available in different sizes. Clear and flexible, allowing easy installation and great looks. Suitable for UV-reactive or colouree water additives, perfect for micro systems.</p> <p>Inner diameter: 3mm<br /> Outer diameter: 5mm<br /> Price per 1 meter</p> <p>Not suitable for Push-In or P&C fittings, only for use with compression fittins or barbed fittings with hose clamp.</p>
<h3>RFID Tag PGST 67R RFID Card</h3> <p>The PGST brand product uses radio wave action to read data. The RFID card can store 64 digits, and you will use it with a PGST alarm host with RFID functionality. The device can store data for up to 10 years. The product is made of ABS material, which makes it durable and resistant to damage.</p> <img src="https://b2b.innpro.pl/data/include/cms/Klaudia-Palenga/pgst/800X800.jpg"> <table class="simple-attrs-in-desc"><tr><th>Brand</th><td>PGST</td></tr><tr><th>Name</th><td>RFID Tag 67R</td></tr><tr><th>Colour</th><td>black</td></tr><tr><th>Material</th><td>ABS</td></tr><tr><th>Carrier frequency</th><td>125 KHz (THRC12)</td></tr><tr><th>Data code</th><td>BPSK</td></tr></table>
<p>With this slot cover it is possible to lay hoses outside the case without destroying the hoses or drilling into the case! Can be used up to 10/8mm.</p><p> Scope of delivery: Slot cover (nickel-plated steel), 2 grommets</p>
<p>The fan screws are used to mount fans, individually or with fan grilles, to a case. The self-tapping threads are suitable for almost any type of fan. The recessed Phillips head allows for easy handling during assembly.</p><p> <strong>Technical details:</strong><br> Material: metal<br> Silver<br> Dimensions (D x L): 5 x 10mm<br> Head: Phillips<br><br> <strong>Scope of delivery:</strong><br> 4x fan screws - silver</p><p></p>
reducing socket G1/4 to G3/8 outside thread - black nickel
Tootekood: 64047Fittings for watercooling
<p>Our trusted fittings are available in a whole new design!</p> <p>Robust high-quality reducing socket from G1/4" inner thread to G3/8" outer thread.</p> <p><strong>Technical details:</strong><br /> Material: Brass, black nickel coated<br /> Thread size: 1/4" inner thread to 3/8" outer thread</p> <p><strong>Extent of delivery:</strong><br /> Reducing socket</p>
<p>High-quality push-in fitting which is made completely from metal, including the inner mechanism, resulting in a cool, uniform design.</p> <p><strong>Technical details:</strong><br />Thread: G1/8"<br />Material: Nickel coated brass<br />For hoses with an outer diameter of 8mm<br />Seal: O-rings seals</p> <p>Please note: For technical reasons this fitting is only compatible with hard PUR hoses.</p> <p class="MsoNormal" style="MARGIN: 0cm 0cm 0pt"><span style="FONT-SIZE: 9pt; FONT-FAMILY: Arial"><a href="http://www.aquainfos.net/textartikel.php?id=39" target="_blank">Aquainfos</a> hat dieses Produkt für Sie getestet <p> </p> </span></p>
<p>High-quality push-in fitting which is made completely from metal, including the inner mechanism, resulting in a cool, uniform design.</p> <p><strong>Technical details:</strong><br />Thread: G1/8"<br />Material: Nickel coated brass<br />For hoses with an outer diameter of 8mm<br />Seal: O-rings seals<br />Features: Angled by 90° and freely revolvable</p> <p>Please note: For technical reasons this fitting is only compatible with hard PUR hoses.</p> <p class="MsoNormal" style="MARGIN: 0cm 0cm 0pt"><span style="FONT-SIZE: 9pt; FONT-FAMILY: Arial"><a href="http://www.aquainfos.net/textartikel.php?id=39" target="_blank">Aquainfos</a> hat dieses Produkt für Sie getestet <p> </p> </span></p>
Alphacool Eisschicht Light thermal pad - 7W/mK 14x14x1mm
Tootekood: 12922Thermal Pads
<p>Alphacool's ultimate solution lets you cool your computer with a sheet of ice. Not an ice sheet in the conventional sense, made of frozen water, but a sheet that brings every chip down to freezing. The properties of these new thermal pads speak for themselves.</p> <p>The Alphacool Eisschicht offers all the benefits and typical qualities of a thermal pad: self-adhesive, elastic, flexible, and much more! Just as varied are the options for placement: whether on RAM or motherboard coolers, or graphics card and CPU coolers, any place where chips meet cooler bodies is a good place for an Alphacool Eisschicht.</p> <p>The Eisschicht Light, with a performance level of 7W/mK, is available in 0.5mm, 1mm, and 1.5mm thicknesses. Perfect for levelling height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers) sizes. These can easily be cut with scissors to get the right size for any component.</p> <p><strong>Download data sheet PDF: <a href="https://www.alphacool.com/download/ENG_1014948_Alphacool_Eisschicht_Light_thermal_pad_-_7W-mK_14x14x1mm.pdf">Alphacool Eisschicht Light thermal pad 7W/mK 14x14x1mm</a></strong></p>
- COMFORT AND PRECISION<br/> - Does not move on the table<br/> - Provides perfect control over your mouse cursor<br/> - Perfect for any optical mouse<br/>
<p><b>MP-S-G Mouse pad</b></p> <ul><li>COMFORT AND PRECISION</li> <li>It does not move on the table</li> <li>Provides excellent control over the mouse cursor</li> <li>Fabric pad with rubber non-slip bottom</li> <li>Suitable for most optical mice</li> </ul>
hose PVC 8/5mm (1/4"ID) small bend radius Clear sold by the meter
Tootekood: 56007Tubing for water cooling
<p>Standard hose for almost all applications. Available in different dimensions. Nice and transparent and flexible, so the hose can be laid easily. Suitable for UV active or colored water additives.<br><br> <strong>Inner diameter</strong> 6mm<br> <strong>Outer diameter</strong> 8mm<br> Price per 1 meter<br> Not suitable for push-in connections (Push-In or P&C) but only for nozzles with overnut or hose connections (e.g. with hose clamp)</p>
<p>This kit is perfect for mounting of a Coolplex reservoir mount e.g. on the case side panel. The robust M6 screws fit perfectly: The head disappears completely in the mounting clips, the washer and nut can be screwed on from the other side for safe fixation.</p> <p><strong>Extent of delivery: </strong><br /> 2 pieces M6 hexagon socket screw<br /> 2 pieces M6 washer<br /> 2 pieces M6 nut</p> <p><strong>Important: </strong>Only compatible with the black mounting clips</p>
Delock Strain Relief Boot for RJ45 Crimp+Cut plug 20 pieces
Tootekood: 86455Network cables and adapters
<p>These compact flush strain relief boots are designed to fit the Delock RJ45 Crimp+Cut plugs.</p><h2>Specification</h2><p>• Also suitable for conventional RJ45 plugs<br />• For cable diameter from 5.0 - 6.5 mm<br />• Colour: transparent<br />• Dimensions (LxWxH): ca. 28.4 x 19.4 x 11.8 mm</p><h2>System requirements</h2><p>• Delock RJ45 Crimp+Cut plug</p><h2>Package content</h2><p>• 20 x Strain Relief Boot for RJ45 </p>
Tempered Glass iPega PG-SW100 for Nintendo Switch OLED
Tootekood: PG-SW100Gamepads and -wheels
<h3>iPega PG-SW100 Tempered Glass for Nintendo Switch OLED</h3> <p>Take care of the protection of your Nintendo Switch OLED and equip yourself with high quality tempered glass. Thanks to 9H hardness it protects console screen from scratches and other mechanical damages. The glass does not affect the image quality, so you can enjoy sharp images and vivid colors. High touch sensitivity is also an advantage, which ensures precision and comfort of use.</p> <img src="https://b2b.innpro.pl/data/include/cms/04iPega/PG-SW100/6.jpg"> <h3>In the kit</h3><ul> <li>Tempered glass</li> <li>Wet wipe</li> <li>Dry wipe</li> <li>Cleaning cloth</li> <li>Dust-Absorbing Cloth</li> <li>Guide sticker</li> </ul> <table class="simple-attrs-in-desc"><tr><th>Manufacturer</th><td>iPega</td></tr><tr><th>Model</th><td>PG-SW100</td></tr><tr><th>Material</th><td>Tempered glass</td></tr><tr><th>Hardness</th><td>9H</td></tr><tr><th>Compatibility</th><td>Nintendo Switch OLED</td></tr></table>
<h3>VR goggle covers PG-P5V003PS</h3> <p>Keep your equipment safe with iPega. The set includes covers dedicated to VR goggles. The product protects both the glasses and the goggle lens from scratches, dust and water. </p> <img src="https://b2b.innpro.pl/data/include/cms/04iPega/PG-P5V003PS-VR2/6.jpg" alt="04iPega/PG-P5V003PS-VR2/6"> <table class="simple-attrs-in-desc"><tr><th>Manufacturer</th><td>iPega</td></tr><tr><th>Manufacturer code</th><td>PG-P5V003PS VR2 lens</td></tr></table>
Nanoxia CoolForce - 60° HT Adapter 12 mm auf 12 mm
Tootekood: 195385Fittings for watercooling
<p>The fitting of Nanoxia in black, has an angle of 60 degrees and couples two hard tubes, which do not run on a common straight line.</p> <p><strong>Technical Data:</strong></p> <ul> <li>Color: Black</li> <li>Angle: 60°</li> <li>Diameter: 20 mm</li> <li>Length: 33 mm</li> <li>Connections: 2x 12 mm Ø</li> </ul>
<p><strong>Mounting rail for mounting the HDD bay 2.5 to 3.5 in your PC.</strong><br /><br />- Suitable for all 2.5 HDD<br />- Supports any 2.5" HDD<br />- Supports 3.5 inch bay inside a computer for installation<br />- Material: metal, 0.8mm<br />- Dimensions: 119.6x31.8x15.6mm<br />- Net weight: 67g</p>
