Kõik hinnakirjad

With the active USB 2.0 connecting cable AXAGON ADR-215B, 15 meters long, you will be able to connect, for example, a printer, scanner, plotter or other USB-B device to your computer. The active USB repeater cable strengthens the passing signal and allows you to connect a significantly more distant USB device than the passive cables. The range of the cable can be further extended, for example, by using AXAGON ADR-210 USB extension cable A great advantage of the ADR-215B extension is an integrated auxiliary power supply connector. In most cases, USB bus power is sufficient, but for devices with larger power consumption the USB power supply may be inadequate and auxiliary power from the mains may resolve the problem. The remarkably compact body of the repeater cable allows trouble-free use in electrical installation strips or cable systems. The use of a high-quality shielded cable ensures high communication speed and minimal undesirable interference. Input: USB 2.0 for connection to a computer USB Type A (M) male connector Output: USB 2.0 for connecting a remote USB device USB Type B (M) male connector transmission rate 480 / 12 / 1.5 Mbit/s (high / full / low speed) Power supply: Power supply of the cable and connected devices via USB bus (bus-power mode 5V - 500mA). For most connected USB devices, the power supply via USB bus is sufficient and no auxiliary power is required. The active part of the cable includes a connector ( 3.5 x 1.3 mm outer x internal diameter) for additional external power supply of 5V/ 1-2 A. The power cable USB A-M / 3.5 mm jack, 1.2 m long is included. The cable allows powering from a standard mobile phone charger with USB-A output 5V / min. 1A, e.g. AXAGON ACU-DS16. Other features: Fully compatible with USB 2.0 and backward compatible with USB 1.1. Full Plug and Play and Hot Plug support. Two LEDs indicating power and USB device connection. Behind the active USB cable, a common passive USB cable can also be used. Dimensions of active part with are 95 x 22 x 13 mm, cable length 15 m. Weight 517 g. Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32- and 64-bit Windows versions supported), Mac OS X 10.x and higher Linux with 2.6.x kernel and higher. Note: Drivers are included with supported operating systems and will be installed automatically. No other drivers need to be installed and are not even available. Package contains: USB 2.0 A-M > B-M active repeater 15 m long, USB-A / 3.5 mm power cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box.

Active extension AXAGON ADR-305 USB 3.2 Gen 1 cable 5 m long. Ideal for connecting your computer to a USB device such as a mouse, keyboard, webcam, printer, scanner, plotter and others. The active USB repeater cable strengthens the passing USB signal and allows you to connect a significantly more distant USB device than the usual 5 meters when passive cables are used. The range of the cable can be further extended by using several cables in a row. Thanks to the used USB 3.2 Gen 1 (formerly USB 3.0) interface, you can enjoy a data transfer speed of up to 5 Gbps. So, you can use the cable for devices that require higher speed, such as backup systems, NAS data storage and others. A great advantage of the ADR-305 extension is an integrated auxiliary power supply connector. In most cases, USB bus power is sufficient, but for devices with larger power consumption the USB power supply may be inadequate and auxiliary power from the mains may resolve the problem. The remarkably compact body of the AXAGON repeater allows for trouble-free use in electrical installation strips or cable systems. The use of a high-quality shielded cable ensures high communication speed and minimal undesirable interference. Input: USB 3.2 Gen 1 for connection to a computer USB Type A (M) male connector Output: USB 3.2 Gen 1 for connecting a remote USB device USB Type A (F) female connector transmission rate 5000 / 480 / 12 / 1.5 Mbit/s (super / high / full / low speed) Power supply: Power supply of the cable and connected devices via USB bus (bus-power mode 5V - 500mA). For most connected USB devices, the power supply via USB bus is sufficient and no auxiliary power is required. The active part of the cable includes a Micro USB connector for additional external power supply of 5V/1-2 A. The power cable USB A-M / Micro USB, 1.2 m long is included. The cable allows powering from a standard mobile phone charger with USB-A output 5V / min. 1A, e.g. AXAGON ACU-DS16. When powering the repeater cable with the power adapter, an external 2.5" disk can be connected without the need for own power supply to the disk. For longer USB route with multiple repeater cables connected in a row, the USB bus supply may be inadequate for USB devices with lower power consumption than an external 2.5" drive. Also, in this case it can help to boost the power supply by connecting a power adapter. Other features: Fully compatible with USB 3.2 Gen 1 (USB 3.0) and backward compatible with USB 2.0 and USB 1.1. Full Plug and Play and Hot Plug support. Two LEDs indicating power and USB connection. Behind the active USB cable, a common passive USB cable can also be used. Dimensions of active part with are 75 x 24 x 13mm, cable length 5 m. Weight 208 g. Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32- and 64-bit Windows versions supported), Mac OS X 10.x and higher Linux with 2.6.x kernel and higher. Note: Drivers are included with supported operating systems and will be installed automatically. No other drivers need to be installed and are not even available. Package contains: USB 3.2 Gen 1 A-M > A-F active repeater 5 m long, USB-A / Micro USB power cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

The pack includes: A convenient A2 format chart pack of Suffolk and Essex Coasts covering the waters from the River Crouch to Lowestoft. The pack is provided in a sturdy plastic wallet. This fully revised and extended edition of our popular 2000 Suffolk and Essex Coasts chart pack has been redesigned and expanded to 11 sheets, including improved coverage of Lowestoft and its approaches. The latest official UKHO Digital has been used and combined with additional information sourced from Imray's network to make it ideal for small craft. The chart pack includes all the navigational charts and tidal Digital for passage, approach, and mooring, and is designed to be used alongside East Coast Pilot by Garth Cooper and Dick Holness. 2000.1 Foulness Point to Harwich (1:120 000) 2000.2 Rivers Ore and Alde (1:35 000) 2000.3 River Deben and Orford Haven (1:35 000) Plan: Woodbridge (1:15 000) 2000.4 Harwich Approaches and Walton Backwaters (1:35 000) Plan: Titchmarsh Marina (1:12 500) 2000.5 Rivers Stour and Orwell (1:35 000) Plans: Upper Orwell to Ipswich (1:20 000), Fox's Marina (1:10 000), Woolverstone Marina (1:10 000), Suffolk Yacht Harbour (1:15 000), Shotley Marina (1:10 000) 2000.6 River Blackwater (1:35 000) Plans: Maldon (1:20 000), Tollesbury Marina (1:12 500), Bradwell Marina (1:12 500) 2000.7 River Colne (1:35 000) Plans: Wivenhoe (1:20 000), Brightlingsea (1:15 000) 2000.8 River Crouch Entrance (1:35 000) 2000.9 Rivers Crouch & Roach (1:35 000) Plans: Burnham Yacht Harbour (1:12 500), River Crouch continuation to Battlesbridge (1:35 000) 2000.10 Harwich to Lowestoft (1:125 000) Plan: Southwold Harbour (1:12 500) 2000.11 Lowestoft Approaches (1:35 000) Plan: Lowestoft Harbour (1:10 000) Imray Digital Charts: Free mobile download A voucher code to download the relevant Imray digital charts into our Imray Navigator app is included with this atlas. <br><br> Autorid: Imray <br>

A convenient A2 format chart pack of the Channel Islands and the adjacent coast of France provided in a sturdy plastic wallet. This fully revised edition includes the latest official UKHO Digital, combined with additional information sourced from Imray's network to make it ideal for small craft. The chart pack includes all the navigational charts and tidal Digital for passage, approach and mooring. This edition has been reschemed to show passage from as far East as Saint-Vaast-la-Hougue and Barfleur. The harbour plan of Port de Chantereyne (Cherbourg) has been extended so show greater approach detail. There has been general updating throughout. This product is also available wiro bound, please use code IC2500-4W. 2500.1 Approaches to the Channel Islands 1: 500 000 WGS 84 2500.2 Pointe de Barfleur to Cap de la Hague 1: 155 000 WGS 84 Plans Cherbourg (1:40 000), Port de Chantereyne (Cherbourg) (1:10 000) 2500.3 Alderney & Burhou 1: 25 000 WGS 84 Plan Alderney Harbour (1:12 500) 2500.4 Passages Between Alderney & Guernsey 1: 150 000 WGS 84 Plan Diélette (1:15 000) 2500.5 Guernsey, Herm & Sark 1: 60 000 WGS 84 2500.6 East Guernsey & Herm 1: 25 000 WGS 84 2500.7 Guernsey & Sark Plans 1: various WGS 84 Plans St Peter Port & Havelet Bay (1:6000), Beaucette Marina (1:10 000), Sark Anchorages (1:25 000), Guernsey - South Coast Anchorages (1:25 000) 2500.8 Passages between Guernsey & Jersey 1: 150 000 WGS 84 Plan Carteret (1:22 500) 2500.9 Jersey & Les Écrehou 1: 75 000 WGS 84 2500.10 Approaches to St Helier 1: 30 000 WGS 84 Plan St Helier Harbour (1:15 000) 2500.11 East Coast of Jersey 1: 25 000 WGS 84 2500.12 Jersey to Granville 1: 150 000 WGS 84 Plan Granville (1:30 000) 2500.13 Plateau des Minquiers 1: 50 000 WGS 84 2500.14 Plateau des Minquiers to St-Malo 1: 150 000 WGS 84 Plan St-Malo Approaches (1:55 000) 2500.15 Îles Chausey 1: 25 000 WGS 84 2500.16 St-Malo & La Rance 1: 15 000 WGS 84 2500.17 La Rance - Cancaval to Lyvet 1: 25 000 WGS 84 A voucher code to download ID20 Imray English Channel charts into Imray Navigator (our app for iPad, iPhone and Android) is included with this chart pack. <br><br> Autorid: Imray <br>

Be productive as you GoIt's light. It's compact. It's the ASUS Vivobook Go 15, and it's designed to make you productive and keep you entertained wherever you go! With its 180 lay-flat hinge, physical webcam shield and loads of thoughtful design features - including a gorgeous OLED display - Vivobook Go 15 is the laptop that sets you free!Windows 11 Home 64-bitAMD Ryzen 5 7520U (2.8GHz)39.6 cm (15.6") Full HD 1920 x 108016GB LPDDR5-SDRAM & 1000GB SSDThe devices referred to on this web page are the most highly-specified models available. Some models and configurations may not have an OLED display option. Please check the product specifications to ensure that the correct type of display is configured before purchasing in-store or online.The visual appearance of OLED displays may change over the product's lifetime. This is expected behavior that can include image persistence or burn-in, where the display shows a faint remnant of an image even after a new image appears on the screen. This tends to occur only in extreme use cases, such as when a static, high-contrast image is continuously displayed for prolonged periods of time. ASUS laptops with an OLED display minimize this risk by setting Windows's Dark mode as default, as well as shortening the idle time before the screen is turned off - both on mains (AC) and battery (DC) power. This dual approach minimizes the potential for burn-in to maximize the lifespan of your OLED display lifespan, and also reduces unnecessary power draw for optimal battery life. We also recommended adjust the brightness of your OLED display to complement the ambient lighting in your environment, rather than keeping the screen at maximum brightness at all times. You should also ensure that you have an animated, dark-background screensaver enabled in the Windows Settings tool. It is recommended that during heavy usage, the laptop lid is opened by more than 90, in order to minimize any effects on OLED screen quality and longevity.Maximum RAM capacity may vary according to device configuration.Maximum SSD capacity may vary according to device configuration.Charges the battery to up to 60% within 49 minutes when the system is off or in Standby mode. Power adapter with a minimum capacity of 45 watts is required. After charging has reached 60% capacity, charging will resume at normal rate. Charging time may vary +/-10% due to system tolerance.Backlit keyboard and integrated fingerprint sensor are optional.WiFi 6E is backwards-compatible with legacy 802.11 specs. Actual performance of WiFi 6E may vary in real-world situations.The testing regime includes the requirements of both military-grade standards and ASUS quality tests, and varies depending on device. MIL-STD-810 testing is conducted on selected ASUS products only. Note that the MIL-STD-810 testing helps to ensure the quality of ASUS products but does not indicate a particular fitness for military use. The test is performed under laboratory conditions. Any damage caused by attempts to replicate these test conditions would be considered accidental, and would not be covered by the standard ASUS warranty. Additional coverage is available with ASUS Premium Care.The screen-to-body ratio is calculated based on the visible body area of the display when the laptop is opened to 90 and the active display area.Average test results: Delta-E < 1.5, +/- 0.5. Over time, the Delta-E value of the display may change. It is recommended to recalibrate the color to ensure color accuracy.Compared to average LCD displays in the market, measuring energy emission of blue light in between 415-455 nm wavelength.Compared to average LCD laptop panel. Average LCD display has 10 ms response time.This amendment defines standardized modifications to both the IEEE 802.11 physical layers (PHY) and the IEEE 802.11 Medium Access Control layer (MAC) that enable at least one mode of operation capable of supporting at least four times improvement in the average throughput per station (measured at the MAC data service access point) in a dense deployment scenario, while maintaining or improving the power efficiency per station. For additional details visit: https://mentor.ieee.org/802.11/dcn/14/11-14-0165-01-0hew-802-11-hew-sg-proposed-par.docx802.11ax 2x2 160 MHz enables 2402 Mbps maximum theoretical data rate, ~3x faster than standard 802.11ac 2x2 80 MHz (867 Mbps) and nearly 6x faster than baseline 1x1ac (433 Mbps) Wi-Fi as documented in IEEE 802.11 wireless standard specifications, and require the use of similarly configured 802.11ax wireless network routers."Up to 75% lower latency" is based on Intel simulation data of 802.11ax with and without OFDMA using 9 clients. Average latency without OFDM is 36 ms, with OFDMA average latency is reduced to 7.6 ms. Latency improvement requires that the AP and all clients support OFDMA.Selected products are tested using enhanced military-grade MIL-STD-810H durability standards, with 12 test methods and 26 test procedures, to ensure extraordinary toughness. Based on ASUS internal market research using available information and testing reports from main laptop brand websites on Oct 28, 2022, ASUS consumer laptops use a regime consisting of 26 test procedures, which is the consumer laptop industry's strictest and most extensive test regime for the MIL-STD-810H standard.Products certified by the Federal Communications Commission and Industry Canada will be distributed in the United States and Canada. Please visit the ASUS USA and ASUS Canada websites for information about locally available products.All specifications are subject to change without notice. Please check with your supplier for exact offers. Products may not be available in all markets.Specifications and features vary by model, and all images are illustrative. Please refer to specification pages for full details.PCB color and bundled software versions are subject to change without notice.Brand and product names mentioned are trademarks of their respective companies.The terms HDMI and HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.*1The Windows 11 upgrade will be delivered to qualifying devices late 2021 into 2022. Timing will vary by device. Certain features require specific hardware (see aka.ms/windows11-spec). 1The Windows 11 upgrade will be delivered to qualifying devices late 2021 into 2022. Timing will vary by device. Certain features require specific hardware (see aka.ms/windows11-spec).*IPS stands for in-plane switching, a type of LED (a form of LCD) display panel technology.Unless otherwise stated, all performance claims are based on theoretical performance. Actual figures may vary in real-world situations.The actual transfer speed of USB 3.0, 3.1, 3.2, and/or Type-C will vary depending on many factors including the processing speed of the host device, file attributes and other factors related to system configuration and your operating environment.Ultrabook, Celeron, Celeron Inside, Core Inside, Intel, Intel Logo, Intel Atom, Intel Atom Inside, Intel Core, Intel Inside, Intel Inside Logo, Intel vPro, Itanium, Itanium Inside, Pentium, Pentium Inside, vPro Inside, Xeon, Xeon Phi, and Xeon Inside are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other countries.Product specifications may differ from country to country. We recommend that you check with your local dealers for the specifications of the products available in your country. Colors of products may not be perfectly accurate due to variations caused by photography and monitor settings.Due to photographic variables and conditions, actual product appearance may differ from images shown on this site.Although we endeavor to present the most accurate and comprehensive information at the time of publication, we reserve the right to make changes without prior notice. Price may not include extra fee, including taxshippinghandlingrecycling fee.For pricing information, ASUS is only entitled to set a recommendation resale price. All resellers are free to set their own price as they wish.* Result from Mobile Mark 2014 office productivity.

<div class="tab-pane fade active show" id="MSpec"> <div class="px-3 py-4 p-sm-4"> <dl class="row"> <dt class="col-sm-4">Product Description</dt> <dd class="col-sm-8">AXAGON - network adapter - PCIe 2.1 - 10/100/1000/2500Base-T</dd> <dt class="col-sm-4">Device Type</dt> <dd class="col-sm-8">Network adapter</dd> <dt class="col-sm-4">Form Factor</dt> <dd class="col-sm-8">Plug-in card - low profile</dd> <dt class="col-sm-4">Interface (Bus) Type</dt> <dd class="col-sm-8">PCI Express 2.1 x1</dd> <dt class="col-sm-4">PCI Specification Revision</dt> <dd class="col-sm-8">PCIe 2.1, PCIe 1.0a, PCIe 2.0, PCIe 3.0, PCIe 1.1</dd> <dt class="col-sm-4">Ports</dt> <dd class="col-sm-8">10/100/1000/2500Base-T</dd> <dt class="col-sm-4">Cabling Type</dt> <dd class="col-sm-8">Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T, Ethernet 2.5GBase-T</dd> <dt class="col-sm-4">Data Link Protocol</dt> <dd class="col-sm-8">10Mb LAN, 100Mb LAN, 1GbE, 2.5GbE</dd> <dt class="col-sm-4">Network / Transport Protocol</dt> <dd class="col-sm-8">NDIS5, NDIS6, IPv4, IPv6, TCP/IP, UDP/IP, ARP, NS</dd> <dt class="col-sm-4">Processor</dt> <dd class="col-sm-8">1 x Realtek Semiconductor RTL8125B</dd> <dt class="col-sm-4">Compliant Standards</dt> <dd class="col-sm-8">IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3bz, IEEE 802.3x, IEEE 1588v1, IEEE 1588v2, IEEE 802.1as, IEEE 802.1Qav, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1ad, IEEE 802.3az</dd> <dt class="col-sm-4">System Requirements</dt> <dd class="col-sm-8">Microsoft Windows 7 / 8 / 8.1 / 10 / 11, Microsoft Windows Server 2008 R2, Microsoft Windows Server 2012, Microsoft Windows Server 2016, Microsoft Windows Server 2019, Microsoft Windows Server 2022, Microsoft DOS, Apple MacOS X 10.7 or later, FreeBSD 7.x, FreeBSD 8.0, FreeBSD 9, Linux Kernel 2.4.x or later, SCO OpenServer 5.0.6, SCO OpenServer 5.0.7, Novell NetWare 5.x, Novell NetWare 6.x</dd> <dt class="col-sm-4">Manufacturer Warranty</dt> <dd class="col-sm-8">2-year warranty</dd> </dl> </div> </div>

AXAGON PCEE-G25 PCI-Express network card adds a high-speed 2.5 Gigabit Ethernet connection to your desktop computer. It is backward compatible with Gigabit and 10/100Base-T networks. The network card is equipped with the Realtek RTL8125B chipset, ensuring seamless compatibility with most operating systems. The LAN adapter supports network boot (PXE) and also includes Realtek Dragon Software for settings management and automatic bandwidth control. The 2.5G Ethernet network card expands your computer with a very fast network connection, adds the missing RJ-45 connector, allows you to add another network card, or replaces the original non-functioning network connection. The advantage of the IEEE 802.3bz standard is that standard Cat 5e and Cat 6 Ethernet cables up to 100 m long can be used for speeds of 2.5 Gb/s. In addition to an adapter with a standard size bracket, the package also includes a low-profile bracket that allows mounting into low-profile cases. Input: PCI-Express 2.1 interface, PCI-Express 1.0a / 1.1 / 2.0 / 3.0 compatible. 1-Lane (x1), compatible with x1 / x4 / x8 / x16 PCIe slots. 1-Lane PCI-Express 2.1 bus bandwidth of 5 Gb/s. Output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates: 10/100/1000/2500 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3bz 2.5GBase-T specifications. Other features: Full Plug and Play support. 10/100/1000/2500 Mbit/s auto-detection. Supports Microsoft NDIS5, NDIS6 Checksum Offload (IPv4, IPv6, TCP, UDP) to reduce processor load. Supports Segmentation Task-offload (Large send v1 and Large send v2). Supports full-duplex transmission and IEEE 802.3x flow control. Supports IEEE 1588v1, IEEE 1588v2, IEEE 802.1AS time synchronization. Supports IEEE 802.1Qav routing and queuing of time-sensitive flows. Supports IEEE 802.1P Layer 2 priority encoding. Supports IEEE 802.1Q VLAN tagging. Supports IEEE 802.1ad Double VLAN. Supports IEEE 802.3az-2010 (EEE) Energy Efficient Ethernet – reduces power consumption at standby. Supports quad core Receive-Side Scaling (RSS). Supports Auto MDI/MDIX – crossover detection and auto-correction eliminate the need for crossover cables. Supports hardware ECC (Error Correction Code) function. Supports hardware CRC (Cyclic Redundancy Check) to detect transmission errors. Supports Pair Swap/Polarity/Skew Correction. LED for indicating network activity. Uses the Realtek RTL8125B chipset. Wake-on-LAN feature support in different modes: Supports sleep mode and remote Wake Up via AMD Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection, and Link Change Wake-up. Supports ECMA-393 proxZzzy standard for sleeping hosts to manage the network connection of sleeping guests using proxy servers. RealWoW! technology support allows remote wake up over the Internet. Advanced Power Management features: The adapter supports advanced power management to reduce losses during standby or light network traffic. It further supports advanced power saving when the Ethernet cable has been disconnected. Supports Advanced Configuration Power management Interface (ACPI). Supports Power Management offload (ARP & NS). Supports Microsoft Always On Always Connected (AOAC). Supports Operating System-directed Power Management (OSPM). Supports PCI MSI (Message Signaled Interrupt) and MSI-X. Supported operating systems: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32- and 64-bit Windows OS versions supported), MS DOS, MacOS X 10.7 and later, Linux kernel 2.4.x and later, FreeBSD 7.x / 8.0 / 9.0, SCO Unix 5.0.6 / 5.0.7, Novell server OS 5.x / 6.x, Novell client for DOS (ODI driver). Package contains: PCI-Express Gigabit Ethernet card with standard bracket, low profile bracket, printed installation guide in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box.

The AXAGON ADE-25R external network card easily converts a USB-A 3.2 Gen 1 (USB 3.0) port into a 2.5 Gigabit Ethernet port. It is compatible with 10/100/1000/2500 Mbit/s transfer speeds. The 2.5 Gb/s network adapter expands your computer with an ultra-fast and stable network connection, adds a missing RJ-45 network connector, provides an additional network card, or replaces a non-functional original network connection. Besides 2.5 gigabit throughput, the LAN adapter offers a wide range of features, such as IPv4/IPv6 checksum offloading to reduce CPU load, crossover detection and auto-correction, TCP large send offload, support for various Wake-on-LAN modes, operation with virtual LAN (VLAN), and advanced Power Management features. Thanks to the IEEE 802.3bz standard, standard Cat 5e and Cat 6 Ethernet cables up to 100 m can be used for 2.5 Gb/s speeds. The metal adapter casing is made of aluminum, ensuring excellent mechanical protection and superior heat dissipation. Its compact size and minimal weight make it an ideal accessory for laptops. With support for current versions of Windows, macOS, and Linux, it can be used with any desktop, laptop, or ultrabook. With modern operating systems from Windows 8.1 and newer, the adapter supports easy automatic installation without requiring an internet connection. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 and USB 2.0. Supports transmission rates of 5,000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). Features a USB type A male connector on a 15 cm permanently attached cable. Output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable. Supported Ethernet interface transmission rates: 10/100/1000/2500 Mb/s. Supports IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, and IEEE 802.3bz 2.5GBase-T specifications. 10/100/1000/2500 Mb/s auto-detection. NBASE-T specification support—allows up to 2.5 Gbps over standard UTP Cat5e cables. Supports IPv4/IPv6 packet Checksum Offload Engine (COE) to reduce processor load, including IPv4 IP/TCP/UDP/ICMP/IGMP & IPv6 TCP/UDP/ICMPv6 checksum verification and generation. Supports TCP Large Send Offload V1 and V2. Supports IEEE 802.1P Layer 2 priority encoding & decoding. Supports IEEE 802.1Q VLAN tagging. Supports IEEE 802.3az EEE (Energy Efficient Ethernet) to reduce power consumption during idle. Supports Jumbo frame. Supports full-duplex transmissions with IEEE 802.3x flow control and half-duplex with back-pressure flow control. Supports Auto MDI/MDIX—crossover detection and auto-correction eliminates need for crossover cables. Supports hardware Cyclic Redundancy Check (CRC) for transmission error detection. Supports Pair Swap/Polarity/Skew Correction. Other features: Full Plug and Play and Hot Plug support. Supports CDC-ECM for automatic driver installation on various operating systems. Adapter powered via USB (bus power)—no external power needed. Two LEDs indicate network activity and adapter connection. Dimensions: 64 x 24 x 14 mm. Weight: 26 g (including cable). USB cable length: 15 cm. Features Realtek RTL8156B chipset. Wake-on-LAN feature support in different modes: Supports sleep mode and remote wake-up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection, and Link Change Wake-up. Supports ECMA-393 proxZzzy standard for sleeping hosts to manage the network connection of sleeping guests using proxy servers. RealWoW! technology support enables remote wake-up over the Internet. Advanced Power Management features: The adapter supports advanced power management to reduce loss during standby or under light network traffic, as well as advanced power saving when the Ethernet cable is disconnected. Supports Advanced Configuration Power Management Interface (ACPI). Supports Power Management offload (ARP & NS). Supports Microsoft Always On Always Connected (AOAC). Supports Intel Converged Platform Power Management (CPPM). Supports Link Power Management (LPM). Supports Operating System-directed Power Management (OSPM). Supports IEEE 802.3az EEE (Energy Efficient Ethernet). Supported OS: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32 and 64-bit versions supported), MacOS X 10.6 and later, Linux with kernel 2.6.14 and later. Package includes: 2.5 Gigabit Ethernet adapter with fixed 15 cm USB-A cable, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with hanging hole.

The AXAGON ADR-207 active USB 2.0 extension cable with a length of 7.5 meters is ideal for connecting your computer to USB devices such as a mouse, keyboard, webcam, printer, scanner, plotter, and others. The active USB repeater cable amplifies the transmitted signal and allows you to connect a USB device at a significantly greater distance than a passive cable would allow. The cable's range can be further extended by connecting several cables in sequence. A great advantage of the ADR-207 cable is the integrated connector for additional power supply. In most cases, power via the USB bus is sufficient, but for devices with higher power consumption, USB power may be insufficient over longer distances, and an external power supply from the mains can solve this problem. The exceptionally compact body of the repeater cable allows trouble-free use in electrical installation ducts or cable systems. The use of a high-quality shielded cable ensures high communication speed and minimal unwanted interference. Input: USB 2.0 for connection to a computer USB Type A (M) male connector Output: USB 2.0 for connecting a remote USB device USB Type A (F) female connector transmission rate 480 / 12 / 1.5 Mbit/s (high / full / low speed) Power supply: Power supply of the cable and connected devices via USB bus (bus-power mode 5V - 500mA). For most connected USB devices, the power supply via USB bus is sufficient and no auxiliary power is required. The active part of the cable includes a connector ( 3.5 x 1.3 mm outer x internal diameter) for additional external power supply of 5V/ 1-2 A. The power cable USB A-M / 3.5 mm jack, 1.2 m long is included. The cable allows powering from a standard mobile phone charger with USB-A output 5V / min. 1A, e.g. AXAGON ACU-QC18. When powering the repeater cable with the power adapter, an external 2.5" disk can be connected without the need for own power supply to the disk. For longer USB route with multiple repeater cables connected in a row, the USB bus supply may be inadequate for USB devices with lower power consumption than an external 2.5" drive. Also, in this case it can help to boost the power supply by connecting a power adapter. Other features: Fully compatible with USB 2.0 and backward compatible with USB 1.1. Full Plug and Play and Hot Plug support. Two LEDs indicating power and USB connection. Behind the active USB cable, a common passive USB cable can also be used. Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, macOS, Linux, Chrome OS and Android. Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 / 2025 and later (all 32- and 64-bit Windows versions supported). Note: Drivers are included with supported operating systems and will be installed automatically. No other drivers need to be installed and are not even available. Package contains: USB 2.0 A-M > A-F active repeater 7.5 m long, USB-A / 3.5 mm power cable, printed installation manual in CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box.

Active extension AXAGON ADR-310 USB 3.2 Gen 1 cable, 10 m in length. Ideal for connecting your computer to USB devices such as a mouse, keyboard, webcam, printer, scanner, plotter, and more. The active USB repeater cable amplifies the signal, allowing connection to USB devices at much greater distances than passive cables. The range can be further extended by connecting several cables in series. With the USB 3.2 Gen 1 interface (formerly USB 3.0), you can enjoy data transfer speeds of up to 5 Gbps. This makes the cable suitable for devices requiring high speeds, such as backup systems, NAS data storage, and others. The ADR-310 cable stands out with its integrated auxiliary power supply connector. While USB bus power is sufficient in most situations, auxiliary power from the mains can be used for devices with higher power demands, solving potential power insufficiencies. The repeater's compact design allows easy use in electrical installation strips or cable management systems. High-quality shielded cabling ensures fast data communication and minimal interference. Input: USB 3.2 Gen 1 for connection to a computer USB Type A (M) male connector Output: USB 3.2 Gen 1 for connecting a remote USB device USB Type A (F) female connector Data transfer rates: 5000 / 480 / 12 / 1.5 Mbit/s (high / full / low speed) Power supply: Power to the cable and connected devices via USB bus (bus-power mode 5V - 500mA). For most connected USB devices, USB bus power is sufficient and no auxiliary power is needed. The active part of the cable features a Micro USB connector for additional external power supply of 5V/1-2A. Includes a USB A-M / Micro USB power cable, 1.2 m in length. This cable allows powering from a standard mobile phone charger with a USB-A output of 5V / min. 1A, e.g., AXAGON ACU-DS16. When the repeater cable is powered by a power adapter, you can connect an external 2.5" drive without needing a separate power supply for the drive. For longer USB routes using multiple repeater cables in series, USB bus power may be insufficient even for devices with lower power consumption than an external 2.5" drive. In such cases, supplementing the power supply with a power adapter can help. Other features: Fully compatible with USB 3.2 Gen 1 (USB 3.0), and backwards compatible with USB 2.0 and USB 1.1. Supports Plug and Play and Hot Plug. Two LEDs indicate power and USB connection status. You can also connect a standard passive USB cable after the active USB cable. Dimensions of active part: 75 x 24 x 13 mm; cable length: 10 m. Weight: 408 g. Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32- and 64-bit Windows versions supported), Mac OS X 10.x and higher, Linux with 2.6.x kernel and higher. Note: Drivers are included in supported operating systems and will install automatically. No additional drivers are required or available. Package contains: USB 3.2 Gen 1 A-M > A-F active repeater, 10 m long, USB-A / Micro USB power cable, multilingual manual (CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA), packed in a cardboard box.

The AXAGON ADS-1PSN active USB converter easily extends your computer with a RS 232 standard serial port. The seamless compatibility of the USB - serial RS232 adapter is due to the use of an original chip from the Taiwanese company Prolific. The fixed 1.5 m long USB-A cable is suitable for use with both a desktop computer and a laptop. The cable is equipped with gold-plated connectors and contacts, the very durable body of the adapter is also suitable for industrial applications. Double shielding protects transmitted signals from adverse interference. An ideal accessory for your computer to connect barcode readers, cash register printers, scanners, microcontroller programmers, CNC machines, modems, and to upgrade or configure set-top boxes, security devices, switches, transmitters and other devices. Input: USB 480Mbps interface (USB 2.0), backward compatible with USB 1.1. Connecting USB type A male connector located on a fixed 1.5 m cable. Output: 1x serial RS-232 port with a DB9 male connector integrated in the adapters body. Transmission rate adjustable in range 75 bit/s - 1000 kbit/s. Compatible with 16C950 UART, backward compatible with 16C550, 16C650, 16C750 and 16C850. Other features: Plug and Play support. FIFO buffer sending 768B and receiving 256B. Adjustable flow control Xon/Xoff, hardware or none. Adjustable word length 4, 5, 6, 7 or 8 bits. Adjustable parity (even, odd, none, mark, space), 1, 1.5 or 2 stop bits. Adjustable usage of the FIFO buffer: receiving (1 - 14b) and sending (1 - 16b). Adjustable number of the port COM1 to COM256. Power Management support. Adapter power supply via USB (bus power) - no auxiliary power supply required. Gold-plated connectors and contacts ensure a reliable connection and, by preventing oxidation, ensure a long life of the converter. Outer cable diameter 5 mm, double shielding. Original Prolific PL2303GT chipset with integrated serial line driver is used. Adapter body dimensions 35 x 56 x 17 mm, cable length 1.5 m. Adapter weight 83 g (including cable). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions. Note: Drivers are included with supported operating systems and are installed completely automatically. Package contains: USB - serial adapter with a 1.5 m long permanently attached USB cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

Compact AXAGON ADSA-FP2A SLIM adapter with USB-A 5Gbps and SATA 6G interface for 2.5" SATA hard drives or SSDs. The connection to the computer enables a permanently attached USB-A cable 20 cm long. Thanks to the USB 3.2 Gen 1 interface, the transfer rate is up to 5 Gb/s, and the Plug & Play function ensures automatic connection to the computer. The adapter also supports all important functions for working seamlessly with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the adapter, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB-A 5Gbps (USB 3.2 Gen 1 / USB 3.0). Speed up to 5 Gbit/s. Connection via USB type A male connector. Device support: SATA III - 6Gb/s (600 MB/s) interface, Supports 2.5" SSD/HDD, max. disk capacity - all without limit. Other features: Compatible with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0). Supports transmission rates 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the USB interface (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol). Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Connection via USB-C male connector on 20 cm long cable permanently connected to the adapter. Supplying the power via bus up to 900mA from one USB port is sufficient in all cases. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Adapter dimensions 70 x 26 x 10 mm. Adapter weight only 20 g incl. USB cable. Supported OS: Windows 7 / 8.1 / 10 / 11 a and later, Windows Server 2008 R2 / 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Package contains: USB-A - SATA adapter with permanently connected 20 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

Compact AXAGON ADSA-FP2C SLIM adapter with USB-C 5Gbps and SATA 6G interface for 2.5" SATA hard drives or SSDs. The connection to the computer enables a permanently attached USB-C cable 20 cm long. Thanks to the USB 3.2 Gen 1 interface, the transfer rate is up to 5 Gb/s, and the Plug & Play function ensures automatic connection to the computer. The adapter also supports all important functions for working seamlessly with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the adapter, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB-C 5Gbps (USB 3.2 Gen 1 / USB 3.0). Speed up to 5 Gbit/s. Connection via USB type C male connector. Device support: SATA III - 6Gb/s (600 MB/s) interface, Supports 2.5" SSD/HDD, max. disk capacity - all without limit. Other features: Compatible with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0). Supports transmission rates 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the USB interface (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol). Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Connection via USB-C male connector on 20 cm long cable permanently connected to the adapter. Supplying the power via bus up to 900mA from one USB port is sufficient in all cases. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Adapter dimensions 70 x 26 x 10 mm. Adapter weight only 18 g incl. USB cable. Supported OS: Windows 7 / 8.1 / 10 / 11 a and later, Windows Server 2008 R2 / 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Package contains: USB-C - SATA adapter with permanently connected 20 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

Aluminum 3in1 memory card reader AXAGON CRE-S3C SUPERSPEED with USB 3.2 Gen 1 interface supports all current versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. It also supports CF cards with capacity up to 128PT. Thanks to the modern reversible USB-C connector, you can easily connect the reader to a laptop, phone or computer with a USB-C connector. Thanks to the USB 3.2 Gen 1 (before USB 3.0) interface, the reader achieves significantly higher data rates compared to readers with USB 2.0 interfaces. UHS-II cards reach speeds of up to 156 MB/s (full-duplex) or 312 MB/s (half-duplex), support for older USH-I cards (max speed 104 MB/s) is a matter of course. The reader will please with the possibility of simultaneous work with cards in all slots and direct copying between them. The elegant aluminum body of the reader has a soft surface to reduce fingerprints. Installation is easy for everyone - just plug the reader into the USB port of your computer and the rest is done automatically. The reader is an ideal accessory for photo amateurs and professionals who use modern UHS-II and also CF cards. Card reader - three slots, supports the following formats: Micro SD slot: microSD, microSDHC, microSDXC, TransFlash. SD slot: SecureDigital, SDHC, SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter miniSD, MMC Micro. CF slot: Compact Flash, CF Type I. The reader supports the following flash card specifications: SD 1.0/1.1 (SD - Secure Digital, up to 2GB). SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB). SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB). SD 4.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB). MMC and eMMC 3.x/4.0/4.1/4.2/4.3/4.4/4.5/5.0 (8-bit). CF 6.0 (UDMA 0 - UDMA 7, up to 128PB). Supports SD 3.01 and SD Jukebox applications (CPRM functions). Supports Ultra High Speed bus UHS-II (FD156/HD312) speeds up to 156 MB/s Full Duplex, resp. 312 MB/s Half Duplex. Supports Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) Supports 104 MB/s. Supports hardware ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function. 3 LUN - the reader is indicated as three disk drives in the file manager. FAT 12/16/32, NTFS, exFAT (FAT 64) file formats support. Other features: SuperSpeed USB - USB 3.2 Gen 1 interface (before USB 3.1 Gen 1 / USB 3.0). Also compatible with USB 3.2 Gen 2, backward compatible with USB 2.0 a USB 1.1. Supports transmission rates 5000 / 480 / 12 Mb/s (Superspeed / High / Full speed). Full Plug and Play and Hot Swap support. Connects via USB type C male connector. Support for connection of phones with USB-C connector. USB-bus card reader power supply (bus-power). A green LED indicating the connection to the computer's USB port (permanent light) and data transfer (blinking). Dimensions 64 x 60 x 15 mm, length of fixed cable 15 cm. Weight 53 g. Supported Operating Systems: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32- and 64-bit Windows versions supported), Mac OS X 10.x and higher, with 2.4.x kernel and higher, Android all versions. Note: Drivers are included with supported operating systems and will be installed automatically. No other drivers need to be installed and are not even available. Package contains: SuperSpeed USB card reader, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

The external network card AXAGON ADE-25RC easily converts a USB-C 3.2 Gen 1 (USB 3.0) port into a 2.5 Gigabit Ethernet port. It is compatible with 10/100/1000/2500 Mbit/s transfer speeds. The 2.5 Gb/s network adapter expands a computer with a very fast and stable network connection, adds a missing RJ-45 network connector, adds another network card, or replaces the original non-functional network connection. In addition to 2.5 gigabit throughput, the LAN adapter offers a wide range of features, such as IPv4/IPv6 checksum offload to reduce CPU load from checksums, crossover detection and auto-correction, TCP large send offload, support for various Wake-on-LAN modes, operation with virtual LANs (VLAN), and advanced power management features. The advantage of the IEEE 802.3bz standard is that standard Cat 5e and Cat 6 Ethernet cables up to 100 m in length can be used for 2.5 Gb/s speed. The metal adapter housing is made of aluminum and provides excellent mechanical protection and very good heat dissipation. Thanks to its compact dimensions and minimal weight, it is an ideal accessory for laptops. Support for current versions of Windows, macOS, and Linux operating systems allows it to be used with any desktop PC, laptop, or ultrabook equipped with a modern reversible USB Type-C connector. In modern operating systems from Windows 8.1 onward, the adapter allows easy automatic installation without the need for an Internet connection. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 and USB 2.0. Compatible with Thunderbolt 3 and 4. Supports transmission rates of 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). USB Type-C male connector on a permanently attached cable 15 cm in length. Output: Gigabit Ethernet interface with RJ-45 connector for connecting UTP or STP cable. Supported transmission rates for the Ethernet interface: 10/100/1000/2500 Mb/s. Supported specifications: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3bz 2.5GBase-T. 10/100/1000/2500 Mb/s auto-detection. NBASE-T specification support - allows speeds up to 2.5 Gbps over standard UTP Cat5e cables. Supports IPv4 / IPv6 packet Checksum Offload Engine (COE) to reduce processor load, including IPv4 IP/TCP/UDP/ICMP/ IGMP & IPv6 TCP/UDP/ICMPv6 checksum control and generation. Supports TCP Large Send Offload V1 and V2. Supports IEEE 802.1P Layer 2 priority encoding & decoding. Supports IEEE 802.1Q VLAN tagging. Supports IEEE 802.3az EEE (Energy Efficient Ethernet) - reduces power consumption when idle. Supports Jumbo frame. Supports full-duplex transmission with IEEE 802.3x flow control and half-duplex transmission with back-pressure flow control. Supports Auto MDI/MDIX - crossover detection and auto-correction eliminate the need for crossover cables. Supports hardware Cyclic Redundancy Check (CRC) to detect transmission errors. Supports Pair Swap/Polarity/Skew Correction. Other features: Full Plug and Play and Hot Plug support. Supports CDC-ECM for automatic driver installation across different OSs. Adapter power supply via USB (bus power) - no external power supply required. Two LEDs indicate network activity and the adapter's connection to the network. Dimensions: 64 x 24 x 14 mm. Weight: 26 g (incl. cable). USB cable length: 15 cm. The Realtek RTL8156B chipset is used. Wake-on-LAN feature support in different modes: Supports sleep mode and remote Wake Up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection, and Link Change Wake-up. Supports the ECMA-393 proxZzzy standard for sleeping hosts to manage the network connection of sleeping guests using proxy servers. RealWoW! technology support allows remote wake-up over the Internet. Advanced Power Management features:The adapter supports advanced power management to reduce losses during standby or light traffic on the network. It also supports advanced power saving when the Ethernet cable has been disconnected. Supports Advanced Configuration Power Management Interface (ACPI). Supports Power Management offload (ARP & NS). Supports Microsoft Always On Always Connected (AOAC). Supports Intel Converged Platform Power Management (CPPM). Supports Link Power Management (LPM). Supports Operating System-directed Power Management (OSPM). Supports IEEE 802.3az EEE (Energy Efficient Ethernet). Supported OS: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32-bit and 64-bit versions of Windows OS are supported), MacOS X 10.6 and later, Linux with kernel 2.6.14 and later. Package contains: 2.5 Gigabit Ethernet adapter with fixed 15 cm long USB-C cable, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in cardboard.

With the active USB 2.0 connecting cable AXAGON ADR-210B, 10 meters long, you will be able to connect, for example, a printer, scanner, plotter or other USB-B device to your computer. The active USB repeater cable strengthens the passing signal and allows you to connect a significantly more distant USB device than the passive cables. The range of the cable can be further extended, for example, by using AXAGON ADR-210 USB extension cable A great advantage of the ADR-210B extension is an integrated auxiliary power supply connector. In most cases, USB bus power is sufficient, but for devices with larger power consumption the USB power supply may be inadequate and auxiliary power from the mains may resolve the problem. The remarkably compact body of the repeater cable allows trouble-free use in electrical installation strips or cable systems. The use of a high-quality shielded cable ensures high communication speed and minimal undesirable interference. Input: USB 2.0 for connection to a computer USB Type A (M) male connector Output: USB 2.0 for connecting a remote USB device USB Type B (M) male connector transmission rate 480 / 12 / 1.5 Mbit/s (high / full / low speed) Power supply: Power supply of the cable and connected devices via USB bus (bus-power mode 5V - 500mA). For most connected USB devices, the power supply via USB bus is sufficient and no auxiliary power is required. The active part of the cable includes a connector ( 3.5 x 1.3 mm outer x internal diameter) for additional external power supply of 5V/ 1-2 A. The power cable USB A-M / 3.5 mm jack, 1.2 m long is included. The cable allows powering from a standard mobile phone charger with USB-A output 5V / min. 1A, e.g. AXAGON ACU-DS16. Other features: Fully compatible with USB 2.0 and backward compatible with USB 1.1. Full Plug and Play and Hot Plug support. Two LEDs indicating power and USB device connection. Behind the active USB cable, a common passive USB cable can also be used. Dimensions of active part with are 95 x 22 x 13 mm, cable length 10 m. Weight 350 g. Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32- and 64-bit Windows versions supported), Mac OS X 10.x and higher Linux with 2.6.x kernel and higher. Note: Drivers are included with supported operating systems and will be installed automatically. No other drivers need to be installed and are not even available. Package contains: USB 2.0 A-M > B-M active repeater 10 m long, USB-A / 3.5 mm power cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box.

Active extension AXAGON ADR-215 USB 2.0 cable, 15 m long is ideal for connecting your computer to a USB device such as a mouse, keyboard, webcam, printer, scanner, plotter and others. The active USB repeater cable strengthens the passing signal and allows you to connect a significantly more distant USB device than the usual passive cable. The range of the cable can be further extended by using several cables in a row. A great advantage of the ADR-215 extension is an integrated auxiliary power supply connector. In most cases, USB bus power is sufficient, but for devices with larger power consumption the USB power supply may be inadequate and auxiliary power from the mains may resolve the problem. The remarkably compact body of the repeater cable allows trouble-free use in electrical installation strips or cable systems. The use of a high quality shielded cable ensures high communication speed and minimal undesirable interference. Input: USB 2.0 for connection to a computer USB Type A (M) male connector Output: USB 2.0 for connecting a remote USB device USB Type A (F) female connector transmission rate 480 / 12 / 1.5 Mbit/s (high / full / low speed) Power supply: Power supply of the cable and connected devices via USB bus (bus-power mode 5V - 500mA). For most connected USB devices, the power supply via USB bus is sufficient and no auxiliary power is required. The active part of the cable includes a connector ( 3.5 x 1.3 mm outer x internal diameter) for additional external power supply of 5V/ 1-2 A. The power cable USB A-M / 3.5mm jack, 1.2 m long is included. The cable allows powering from a standard mobile phone charger with USB-A output 5V / min. 1A, e.g. AXAGON ACU-DS16. When powering the repeater cable with the power adapter, an external 2.5" disk can be connected without the need for own power supply to the disk. For longer USB route with multiple repeater cables connected in a row, the USB bus supply may be inadequate for USB devices with lower power consumption than an external 2.5" drive. Also in this case it can help to boost the power supply by connecting a power adapter. Other features:Fully compatible with USB 2.0 and backward compatible with USB 1.1. Full Plug and Play and Hot Plug support. Two LEDs indicating power and USB connection. Behind the active USB cable, a common passive USB cable can also be used. Dimensions of active part with are 74 x 22 x 13 mm, cable length 15 m. Weight 503 g. Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32- and 64-bit Windows versions supported), Mac OS X 10.x and higher Linux with 2.6.x kernel and higher. Note: Drivers are included with supported operating systems and will be installed automatically. No other drivers need to be installed and are not even available. Package contains: USB 2.0 A-M > A-F active cable 15 m long, USB-A / 3.5 mm power cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

With the active USB 2.0 connecting cable AXAGON ADR-220B, 20 meters long, you will be able to connect, for example, a printer, scanner, plotter or other USB-B device to your computer. The active USB repeater cable strengthens the passing signal and allows you to connect a significantly more distant USB device than the passive cables. The range of the cable can be further extended, for example, by using AXAGON ADR-210 USB extension cable A great advantage of the ADR-220B extension is an integrated auxiliary power supply connector. In most cases, USB bus power is sufficient, but for devices with larger power consumption the USB power supply may be inadequate and auxiliary power from the mains may resolve the problem. The remarkably compact body of the repeater cable allows trouble-free use in electrical installation strips or cable systems. The use of a high-quality shielded cable ensures high communication speed and minimal undesirable interference. Input: USB 2.0 for connection to a computer USB Type A (M) male connector Output: USB 2.0 for connecting a remote USB device USB Type B (M) male connector transmission rate 480 / 12 / 1.5 Mbit/s (high / full / low speed) Power supply: Power supply of the cable and connected devices via USB bus (bus-power mode 5V - 500mA). For most connected USB devices, the power supply via USB bus is sufficient and no auxiliary power is required. The active part of the cable includes a connector ( 3.5 x 1.3 mm outer x internal diameter) for additional external power supply of 5V/ 1-2 A. The power cable USB A-M / 3.5 mm jack, 1.2 m long is included. The cable allows powering from a standard mobile phone charger with USB-A output 5V / min. 1A, e.g. AXAGON ACU-DS16. Other features: Fully compatible with USB 2.0 and backward compatible with USB 1.1. Full Plug and Play and Hot Plug support. Two LEDs indicating power and USB device connection. Behind the active USB cable, a common passive USB cable can also be used. Dimensions of active part with are 95 x 22 x 13 mm, cable length 20 m. Weight 674 g. Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32- and 64-bit Windows versions supported), Mac OS X 10.x and higher Linux with 2.6.x kernel and higher. Note: Drivers are included with supported operating systems and will be installed automatically. No other drivers need to be installed and are not even available. Package contains: USB 2.0 A-M > B-M active repeater 20 m long, USB-A / 3.5 mm power cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box.

SuperSpeed USB 5 Gbps docking / cloning station AXAGON ADSA-D25 CLONE MINI quickly and easily connects up to two 2.5" disks to your computer at the same time. The USB Micro-B connector on the dock and included USB Micro-B USB-A cable enables a connection to computer. This compact helper will allow you easiest connection of any 2.5" SATA drive to computer or notebook. Just insert one or two disks into the base at the same time, no tools or accessories are needed. Changing disks is very quick and easy. You can use the docking station to easy cloning the contents of connected disks without the need to connect to a PC. Insert the source disk into the first slot of the station HDD A (source) and insert the target disk into the second slot HDD B (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of old HDD to new SSD, including a working operating system (Windows, macOS, Linux). SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the SSD/HDD condition. Supports sleeping of the connected disks and station. The station case is sufficiently robust and durable, which allows perfect stability even with inserted disks. Rubber anti-slip pads prevent sliding on the table and vibrations of the hard drives. The outer casing is made of aluminum with an elegant brushed surface. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB 5 Gbps. Speed up to 5 Gbit/s. Connection via USB Micro-B female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface. Supports 2.5" SSD/HDD. Max. disk capacity all without limitation. Max. 2.5" disk height- all without limitation. Other features: Compatible with USB 3.2 Gen 2 (USB 3.1 Gen 2), USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with USB Mass Storage Class Specification. The total bandwidth / transmission rate of the station is determined by the USB interface used (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD/HDD boot support in docking station. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spinning down when idle. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Connection via USB Micro-B female connector. USB Micro-B USB-A cable 60 cm long is included. LED indicating SSD/HDD dock power and disk activity in both shafts. Station dimensions 89 x 58 x 59 mm. Weight 137 g. Power: Power cable USB-A 3.5/1.3 mm DC 5V length 1 m is included in the package. The cable allows powering the station from the computer USB-A port or a standard mobile phone charger with a USB-A output of 5V / min. 1A, e.g. AXAGON ACU-DS16. Power switch. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Both HDD and SSD can be cloned. Cloning speed up to 300 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Supported operating systems: MS Windows 7 / 8 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SSD/HDD dock, USB Micro-B USB-A cable 60 cm long, power cable 100 cm, printed installation manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

The AXAGON PCES-SA4M2 PCI-Express controller extends your desktop PC with two SATA III ports and two slots for SATA M.2 disks with a transmission rate up to 6Gb/s. The combination of a two-port SATA III controller and two SATA M.2 slots makes the card a very useful device for expanding your computer. You can easily connect up to four disks, such as two 3.5" disks or optical drives and two SATA M.2 disks. The card equipped with ASMedia chipset not only supports SATA 3.0 specification, but also other SATA technologies such as Hot-Plug, Native Command Queue (NCQ), TRIM, or Port Multiplier. Easy installation without the need to install drivers on most operating systems. Included low profile bracket allow controller installation into standard and also low profile PC cases. Input: PCI-Express 3.0 interface, compatible with PCI-Express 1.0a / 1.1 / 2.0 /2.1. Number of 2-Lane (x2) lines, compatible with x4 / x8 / x16 PCIe slots. The bandwidth of 2-Lane PCI-Express 3.0 bus 4 GB/s bidirectional. Outputs: 2x independent Serial ATA port, SATA III 6G standard. 2x internal 7-pin SATA data connector. Supports all SATA I / SATA II / SATA III optical drives, SSDs and hard disks of all capacities. 2x independent NGFF 75-pin B-key slot for SATA M.2 drives. designed for B+M-key and B-key disks with 2230, 2242, 2260 a 2280 mm dimensions. Support of both one-sided and double-sided SATA M.2 SSD disks of all capacities. Other features: Full Plug and Play support. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with the ATA AHCI (Advanced Host Controller Interface) specification revision 1.4. Fully supports Hot Plug connecting and disconnecting of SATA devices while running. Supports Native Command Queuing (NCQ). TRIM feature support for SSD disks. Port Multiplier Command Based Switching feature support. Boot support from connected disk incl. cooperation with computer motherboard BIOS / UEFI. 4x LED to indicate connected disks activity. Four 2-pin sockets for connecting the HDD LEDs of the computer case. The ASMedia ASM1164 chipset is used. Supported OS: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32- and 64-bit Windows OS versions), Linux with kernel 2.6.x and above. Package contains: PCI-Express controller with standard bracket, low profile bracket, mounting material, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

AXAGON PCEU-43RS PCI-Express card adds four external USB 3.2 Gen 1 ports to your desktop computer. The card is designed for fast data transfers at speeds up to 5 Gb/s. All four SuperSpeed USB ports are taken out to the bracket. The dual power supply of the controller enables standard power supply of the controller and connected USB peripherals via the PCI-Express bus as well as optional power supply from the PC power supply via the SATA power connector. The USB controller is equipped with a renowned Renesas company chipset with proven seamless compatibility, high performance and UASP support. Low profile bracket is included in the package for mounting the adapter into low profile cases. Input: PCI-Express 2.0 interface, compatible with PCI-Express 1.0a / 1.1 / 2.1 / 3.0. Number of lines: 1-Lane (x1), compatible with x1 / x4 / x8 / x16 PCIe slots. A bandwidth of 1-Lane PCI-Express 2.0 bus is 5 Gb/s. Output: 4x external USB 3.2 Gen 1 port with USB type A-F connectors. SuperSpeed USB - USB 3.2 Gen 1 interface (before USB 3.1 Gen 1 / USB 3.0). Compatible with USB 3.2 Gen 2, backward compatible with USB 2.0 a USB 1.1. Supports transmission rates 5000 / 480 / 12 / 1.5 Mb/s (super / high / full / low speed). When connected to a PCI-Express bus version 1.0, theor. transmission rate max. 2500 Mb/s. Other features: Full Plug and Play support. Supports concurrent activity of SuperSpeed USB, USB 2.0 and USB 1.1 devices. Compliant with the final official xHCI specification revision 1.0 by USB-IF. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Fully supports Hot Plug connecting and disconnecting of USB devices while running. Standard power supply for the controller and connected USB peripherals via the PCI-Express bus. In this power supply mode, the PCIe controller can handle up to three magnetic 2.5" external disks simultaneously. Optional power supply from PC source via SATA power connector. Renesas PD720201 chipset is used. Supported operating systems: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32- and 64-bit Windows OS versions), Linux with kernel 2.6.31 and above. Note: Drivers are only installed for Windows XP / Vista / 7. For Linux, Windows 8 / 8.1 / 10 / 11, Server 2012 / 2016 / 2019 / 2022 and later versions, no external drivers are required, they are already part of the operating system. Package contains: PCI-Express controller with a standard bracket, low-profile bracket multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

Mobile Mini Memory Card Reader AXAGON CRE-DAC with USB 5 Gbps interface supports all current versions of SD and microSD cards including SDXC and microSDXC with capacities up to 2TB. The big advantage of the reader is both the USB-C and the USB-A connector, so the connection is really universal. The reader can be directly connected to all desktop computers or laptops, as well as to phones and tablets with a USB-C connector. With USB 3.2 Gen 1 (USB 3.0) interface, the reader achieves significantly higher data rates for UHS-I SD cards compared to USB 2.0 interface readers. The card reader allows simultaneous handling of cards in both slots and direct copying between them. The metal body of the reader not only looks great, but also increases its durability. The finely structured surface with no fingerprint remains will also please you. Both connectors are protected by carrying caps when carrying them. The included hinge allows the card reader to be attached to a key ring. Installation is easy for everyone, just plug the reader into the USB port of your computer or mobile phone and the rest is done automatically. Card reader - two slots, supports the following formats: Micro SD slot: microSD / microSDHC / microSDXC / TransFlash, SD slot: Secure Digital, SDHC, SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with miniSD, microSD, microSDHC, microSDXC, MMC Micro adapter. The reader supports the following flash card specifications: SD 1.0/1.1 (SD - Secure Digital, up to 2GB). SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB). SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB). MMC and eMMC 3.x/4.0/4.1/4.2/4.3/4.4/4.5/5.0 (8-bit). Supports SD 3.01 and SD Jukebox applications (CPRM functions). Supports Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s. Supports hardware ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function. 2 LUN - the reader is indicated as two disk drives in the file manager. FAT 12/16/32, NTFS, exFAT (FAT 64) file formats support. Other features: SuperSpeed USB - USB 3.2 Gen 1 interface (before USB 3.1 Gen 1 / USB 3.0). Also compatible with USB 3.2 Gen 2, backward compatible with USB 2.0 and USB 1.1. Supports transmission rates 1.5 / 12 / 480 / 5000 Mbit/s (low / full / high / super speed). Full Plug and Play and Hot Swap support. Connects via USB type C male or A male connector. Support for connection of phones with microUSB connector via OTG adapter. Reader power via USB bus (bus-power). The LED indicates the connection of the reader to the computer. Dimensions 70 x 17 x 10 mm with caps attached. Weight 14 g. Supported OS: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32- and 64-bit Windows versions supported), Mac OS X 10.x and higher Linux with 2.4.x kernel and higher, Android all versions. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SuperSpeed USB card reader, 2 USB connector caps, key hinge, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

<p>Mobile Mini Memory Card Reader AXAGON CRE-DAC with USB 5 Gbps interface supports all current versions of SD and microSD cards including SDXC and microSDXC with capacities up to 2TB. </p> <p>The big advantage of the reader is both the USB-C and the USB-A connector, so the connection is really universal. The reader can be directly connected to all desktop computers or laptops, as well as to phones and tablets with a USB-C connector.</p> <p>With USB 3.2 Gen 1 (USB 3.0) interface, the reader achieves significantly higher data rates for UHS-I SD cards compared to USB 2.0 interface readers. The card reader allows simultaneous handling of cards in both slots and direct copying between them.</p> <p>The metal body of the reader not only looks great, but also increases its durability. The finely structured surface with no fingerprint remains will also please you. Both connectors are protected by carrying caps when carrying them. The included hinge allows the card reader to be attached to a key ring. Installation is easy for everyone, just plug the reader into the USB port of your computer or mobile phone and the rest is done automatically. </p> <p><strong>Card reader - two slots, supports the following formats:</strong><br /> Micro SD slot: microSD / microSDHC / microSDXC / TransFlash,<br /> SD slot: Secure Digital, SDHC, SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with miniSD, microSD, microSDHC, microSDXC, MMC Micro adapter.</p> <p><strong>The reader supports the following flash card specifications:</strong><br /> SD 1.0/1.1 (SD - Secure Digital, up to 2GB).<br /> SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB).<br /> SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB).<br /> MMC and eMMC 3.x/4.0/4.1/4.2/4.3/4.4/4.5/5.0 (8-bit).<br /> Supports SD 3.01 and SD Jukebox applications (CPRM functions).<br /> Supports Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s.<br /> Supports hardware ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function.<br /> 2 LUN - the reader is indicated as two disk drives in the file manager.<br /> FAT 12/16/32, NTFS, exFAT (FAT 64) file formats support.</p> <p><strong>Other features:</strong><br /> SuperSpeed USB - USB 3.2 Gen 1 interface (before USB 3.1 Gen 1 / USB 3.0).<br /> Also compatible with USB 3.2 Gen 2, backward compatible with USB 2.0 and USB 1.1.<br /> Supports transmission rates 1.5 / 12 / 480 / 5000 Mbit/s (low / full / high / super speed). <br /> Full Plug and Play and Hot Swap support.<br /> Connects via USB type C male or A male connector.<br /> Support for connection of phones with microUSB connector via OTG adapter.<br /> Reader power via USB bus (bus-power).<br /> The LED indicates the connection of the reader to the computer.<br /> Dimensions 70 x 17 x 10 mm with caps attached.<br /> Weight 14 g.</p> <p><strong>Supported OS:</strong><br /> MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32- and 64-bit Windows versions supported), Mac OS X 10.x and higher Linux with 2.4.x kernel and higher, Android all versions.<br /> Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available.</p> <p><strong>Package contains:</strong><br /> SuperSpeed USB card reader,<br /> 2 USB connector caps,<br /> key hinge,<br /> multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA,<br /> packed in a cardboard box with a hanging hole.</p>

Aluminum 3in1 memory card reader AXAGON CRE-S3 SUPERSPEED with USB 3.2 Gen 1 interface supports all current versions of SD and microSD cards, including SDXC and microSDXC with capacities up to 2TB. It also supports CF cards with capacities up to 128PT. Thanks to the USB 3.2 Gen 1 (before USB 3.0) interface, the reader achieves significantly higher transfer speeds compared to readers with USB 2.0 interfaces. UHS-II cards reach speeds of up to 156 MB/s (full-duplex) or 312 MB/s (half-duplex), support for older USH-I cards (max speed 104 MB/s) is a matter of course. The reader will please with the possibility of simultaneous work with cards in all slots and direct copying between them. The elegant aluminum body of the reader has a soft surface to reduce fingerprints. Installation is easy for everyone - just plug the reader into the USB port of your computer and the rest is done automatically. The reader is an ideal accessory for photo amateurs and professionals who use modern UHS-II and also CF cards. Card reader - three slots, supports the following formats: Micro SD slot: microSD, microSDHC, microSDXC, TransFlash. SD slot: SecureDigital, SDHC, SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter miniSD, MMC Micro. CF slot: Compact Flash, CF Type I. The reader supports the following flash card specifications: SD 1.0/1.1 (SD - Secure Digital, up to 2GB). SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB). SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB). SD 4.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB). MMC and eMMC 3.x/4.0/4.1/4.2/4.3/4.4/4.5/5.0 (8-bit). CF 6.0 (UDMA 0 - UDMA 7, up to 128PB). Supports SD 3.01 and SD Jukebox applications (CPRM functions). Supports Ultra High Speed bus UHS-II (FD156/HD312) speeds up to 156 MB/s Full Duplex, resp. 312 MB/s Half Duplex. Supports Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) Supports 104 MB/s. Supports hardware ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function. 3 LUN - the reader is indicated as three disk drives in the file manager. FAT 12/16/32, NTFS, exFAT (FAT 64) file formats support. Other features: SuperSpeed USB - USB 3.2 Gen 1 interface (before USB 3.1 Gen 1 / USB 3.0). Also compatible with USB 3.2 Gen 2, backward compatible with USB 2.0 a USB 1.1. Supports transmission rates 5000 / 480 / 12 Mb/s (Superspeed / High / Full speed). Full Plug and Play and Hot Swap support. Connects via USB type A male connector. Supports connection of phones with microUSB connector via OTG reduction. Supports connecting phones with USB-C connector using USB-C USB-A adapter. USB-bus card reader power supply (bus-power). A green LED indicating the connection to the computer's USB port (permanent light) and data transfer (blinking). Dimensions 64 x 60 x 15 mm, length of fixed cable 15 cm. Weight 53 g. Supported Operating Systems: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 /2022 and later (all 32- and 64-bit Windows versions supported), Mac OS X 10.x and higher, with 2.4.x kernel and higher, Android all versions. Note: Drivers are included with supported operating systems and will be installed automatically. No other drivers need to be installed and are not even available. Package contains: SuperSpeed USB card reader, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

<p>Aluminum 3in1 memory card reader AXAGON CRE-S3C SUPERSPEED with USB 3.2 Gen 1 interface supports all current versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. It also supports CF cards with capacity up to 128PT. Thanks to the modern reversible USB-C connector, you can easily connect the reader to a laptop, phone or computer with a USB-C connector.</p> <p>Thanks to the USB 3.2 Gen 1 (before USB 3.0) interface, the reader achieves significantly higher data rates compared to readers with USB 2.0 interfaces. UHS-II cards reach speeds of up to 156 MB/s (full-duplex) or 312 MB/s (half-duplex), support for older USH-I cards (max speed 104 MB/s) is a matter of course.</p> <p>The reader will please with the possibility of simultaneous work with cards in all slots and direct copying between them.</p> <p>The elegant aluminum body of the reader has a soft surface to reduce fingerprints.</p> <p>Installation is easy for everyone - just plug the reader into the USB port of your computer and the rest is done automatically.</p> <p>The reader is an ideal accessory for photo amateurs and professionals who use modern UHS-II and also CF cards.    </p> <p><strong>Card reader - three slots, supports the following formats:</strong><br /> Micro SD slot: microSD, microSDHC, microSDXC, TransFlash.<br /> SD slot: SecureDigital, SDHC, SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter miniSD, MMC Micro.<br /> CF slot: Compact Flash, CF Type I.</p> <p><strong>The reader supports the following flash card specifications:</strong><br /> SD 1.0/1.1 (SD - Secure Digital, up to 2GB).<br /> SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB).<br /> SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB).<br /> SD 4.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB).<br /> MMC and eMMC 3.x/4.0/4.1/4.2/4.3/4.4/4.5/5.0 (8-bit).<br /> CF 6.0 (UDMA 0 - UDMA 7, up to 128PB).<br /> Supports SD 3.01 and SD Jukebox applications (CPRM functions).<br /> Supports Ultra High Speed bus UHS-II (FD156/HD312) speeds up to 156 MB/s Full Duplex, resp. 312 MB/s Half Duplex.<br /> Supports Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) Supports 104 MB/s.<br /> Supports hardware ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function.<br /> 3 LUN - the reader is indicated as three disk drives in the file manager.<br /> FAT 12/16/32, NTFS, exFAT (FAT 64) file formats support.</p> <p><strong>Other features:</strong><br /> SuperSpeed USB - USB 3.2 Gen 1 interface (before USB 3.1 Gen 1 / USB 3.0).<br /> Also compatible with USB 3.2 Gen 2, backward compatible with USB 2.0 a USB 1.1.<br /> Supports transmission rates 5000 / 480 / 12 Mb/s (Superspeed / High / Full speed).<br /> Full Plug and Play and Hot Swap support.<br /> Connects via USB type C male connector.<br /> Support for connection of phones with USB-C connector.<br /> USB-bus card reader power supply (bus-power).<br /> A green LED indicating the connection to the computer's USB port (permanent light) and data transfer (blinking).<br /> Dimensions 64 x 60 x 15 mm, length of fixed cable 15 cm.<br /> Weight 53 g.</p> <p><strong>Supported Operating Systems:</strong><br /> MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32- and 64-bit Windows versions supported), Mac OS X 10.x and higher, with 2.4.x kernel and higher, Android all versions.<br /> Note: Drivers are included with supported operating systems and will be installed automatically. No other drivers need to be installed and are not even available.</p> <p><strong>Package contains:</strong><br /> SuperSpeed USB card reader,<br /> multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA,<br /> packed in a cardboard box with a hanging hole.</p>

<p>Compact desktop smart card / ID card reader AXAGON CRE-SM3N FlatReader with USB 2.0 interface. The card reader supports all common contact smart card formats, chip cards and other cards, including contact bank payment cards or contact electronic ID cards *.  The reader is compatible with most national applications for eID (electronic ID cards).</p> <p>Compatibility with all common OS such as Windows, Linux, Mac OS and Android allows wide use on desktops and laptops as well as phones and tablets. The smart LED indicator lights up shortly after the activity change, then turns off and doesn't bother the user with unnecessary light. Compact design, high-quality manufacturing, anti-slip pads and long cable ensure easy and trouble-free use.  </p> <p><strong>Input:</strong><br /> USB 2.0 CCID protocol.<br /> Backward compatible with USB 1.1.<br /> Connection to computer via USB 2.0 type A male connector.<br /> For connection to a phone or tablet with a USB-C connector, we recommend a USB-C -> USB-A reduction, e.g. AXAGON RUCM-AFA. For connection to a phone with a micro USB connector, we recommend an OTG reduction micro USB -> USB-A.</p> <p><strong>Card reader:</strong><br /> 1 slot supports contact ATM / CAC / ID / IC / SIS cards.<br /> Supports ISO 7816 Class A, B and C contact Smart cards (5V, 3V and 1.8V).<br /> Supports ISO 7816, EMV 4.1 (EMV 2000 level 1) standards.<br /> Supports protocols T=0 and T=1, I2C, SLE 4432/42 (S=10), SLE 4418/28 (S=9).<br /> PC/SC 2.0 PC Smart Card standard support.<br /> Microsoft Smart Card for Windows support.<br /> Supports I2C cards SLE4418, SLE4428, SLE4432, SLE4442, SLE4436, SLE5536, SLE6636, AT88SC1608, AT45D041.<br /> Microsoft WHQL USB Smart Card Reader compliant.<br /> FIPS 201 standard compliant.</p> <p><strong>Other features:</strong><br /> Microsoft USB-CCID driver compatible.<br /> Plug and Play support.<br /> Standby support, automatic standby mode.<br /> Reader power via USB bus (bus-power).<br /> A LED indicates computer USB port connection (steady) and data transfer (flashing).<br /> Anti-slip pad against spontaneous movement on the table.<br /> Dimensions 67 x 63 x 20 mm, cable length 1.3 m.<br /> Weight 57 g.</p> <p><strong>Supported OS:</strong><br /> MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.4.x an higher, Android 8 and above.</p> <p>* Note: The reader only supports contact cards that have visible contacts on the surface. The card without contacts is therefore RFID and cannot be used in the reader.</p> <p><strong>Package contains:</strong><br /> USB Smart card reader with 1.3 m hardwired cable,<br /> multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA,<br /> packed in a cardboard box with a hanging hole.</p>

<p>Desktop stand smart card / ID card reader AXAGON CRE-SM4N StandReader with USB 2.0 interface. The card reader supports all common contact smart card formats, chip cards and other cards, including contact bank payment cards or contact electronic ID cards *. The reader is compatible with most national applications for eID (electronic ID cards). </p> <p>Compatibility with all common OS such as Windows, Linux and Mac OS and Android, allows wide use on desktops and laptops as well as phones and tablets. The smart LED indicator lights up shortly after the activity change, then turns off and doesn't bother the user with unnecessary light. Practical design, high-quality manufacturing, anti-slip pad and long cable ensure easy and trouble-free use. </p> <p><strong>Input:</strong><br /> USB 2.0 CCID protocol.<br /> Backward compatible with USB 1.1.<br /> Connection to computer via USB 2.0 type A male connector.<br /> For connection to a phone or tablet with a USB-C connector, we recommend a USB-C -> USB-A reduction, e.g. AXAGON RUCM-AFA. For connection to a phone with a micro USB connector, we recommend an OTG reduction micro USB -> USB-A.</p> <p><strong>Card reader:</strong><br /> 1 slot supports contact ATM / CAC / ID / IC / SIS cards.<br /> Supports ISO 7816 Class A, B and C contact Smart cards (5V, 3V and 1.8V).<br /> Supports ISO 7816, EMV 4.1 (EMV 2000 level 1) standards.<br /> Supports protocols T=0 and T=1, I2C, SLE 4432/42 (S=10), SLE 4418/28 (S=9).<br /> PC/SC 2.0 PC Smart Card support.<br /> Microsoft Smart Card for Windows support.<br /> Supports I2C cards SLE4418, SLE4428, SLE4432, SLE4442, SLE4436, SLE5536, SLE6636, AT88SC1608, AT45D041.<br /> Microsoft WHQL USB Smart Card Reader compliant.<br /> FIPS 201 standards compliant.</p> <p><strong>Other features:</strong><br /> Microsoft USB-CCID driver compatible.<br /> Plug and Play support.<br /> Standby support, automatic standby mode.<br /> Reader power via USB bus (bus-power).<br /> Red LED indicates computer USB port connection (steady) and data transfer (flashing). <br /> LED indicators lights up shortly after the activity change, then turns off and doesn't bother. <br /> LED indication shines through the contact symbol, which indicates inserted card orientation.<br /> Weights at the bottom of the stand for better stability.<br /> Anti-slip pad against spontaneous movement on the table.<br /> Dimensions 77 x 56 x 49 mm, cable length 1.3 m.<br /> Weight 82 g.</p> <p><strong>Supported OS:</strong><br /> MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.4.x and higher, Android 8 and above.</p> <p>* Note: The reader only supports contact cards that have visible contacts on the surface. The card without contacts is therefore RFID and cannot be used in the reader.</p> <p><strong>Package contains:</strong><br /> USB Smart card reader with 1.3 m hardwired cable,<br /> multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA,<br /> packed in a cardboard box with a hanging hole.</p>

<p>Compact travel desktop smart card / ID card reader AXAGON CRE-SMP2A PocketReader with USB 2.0 interface includes additional slots for SD, microSD and SIM cards. The card reader supports all common contact smart card formats, chip cards and other cards, including contact bank payment cards or contact electronic ID cards *.  The reader is compatible with most national applications for eID (electronic ID cards).</p> <p>Thanks to the SIM card slot including SIM management software, SD and microSD card slots, the reader can also be used for backup and data transfer. </p> <p>Compatibility with all common OS such as Windows, Linux, Mac OS and Android, allows wide use on desktops and laptops as well as phones and tablets. The package also includes a USB-C USB-A adapter for connecting to devices with a USB-C connector. The rotating cap helps protect the USB-A connector. The compact design and high-quality manufacturing make this reader one of the smallest combined Smart card and memory card readers on the market.</p> <p><strong>Input:</strong><br /> USB 2.0 CCID protocol.<br /> Backward compatible with USB 1.1.<br /> Connection to computer via USB 2.0 type A male connector.<br /> Connection to a phone or tablet with a USB-C connector thanks to the USB-C USB-A adapter. <br /> For connection to a phone with a micro USB connector, we recommend an OTG reduction micro USB USB-A.</p> <p><strong>Card reader:</strong><br /> Four-slot reader with support for the following formats:<br /> Smart Card slot supports ATM / CAC / ID / IC / SIS contact cards,<br /> Micro SD slot supports microSD / microSDHC / microSDXC / TransFlash cards,<br /> SD slot supports SecureDigital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter miniSD, miniSDHC, MMC Micro cards<br /> SIM slot supports standard size SIM cards (microSIM and nanoSIM with the appropriate adapter).</p> <p><strong>Smart card specification support:</strong><br /> Supports ISO 7816 Class A, B and C contact Smart cards (5V, 3V and 1.8V).<br /> Supports ISO 7816, EMV 4.1 (EMV 2000 level 1) standards.<br /> Supports protocols T=0 and T=1, I2C, SLE 4432/42 (S=10), SLE 4418/28 (S=9).<br /> PC/SC 2.0 PC Smart Card standard support.<br /> Microsoft Smart Card for Windows support.<br /> Supports I2C cards SLE4418, SLE4428, SLE4432, SLE4442, SLE4436, SLE5536, SLE6636, AT88SC1608, AT45D041.<br /> Microsoft WHQL USB Smart Card Reader compliant.<br /> FIPS 201 standard compliant.</p> <p><strong>Supports flash card specifications:</strong><br /> SD 1.0/1.1 (SD - Secure Digital, up to 2GB) standard compliant.<br /> SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB) standard compliant.<br /> SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB) standard compliant.<br /> MMC a eMMC 3.x/4.0/4.1/4.2 standard compliant.</p> <p><strong>Other features:</strong><br /> Microsoft USB-CCID driver compatible.<br /> Plug and Play support.<br /> Allows the use of SIM and microSD slot at the same time.<br /> SW SIMedit for editing and backing up contacts can be downloaded from the product support tab at www.axagon.eu.<br /> Smart card insertion detection.<br /> Standby support, automatic standby mode.<br /> Reader power via USB bus (bus-power).<br /> A LED indicates computer USB port connection (steady) and data transfer (flashing).<br /> Dimensions 80 x 30 x 15 mm.<br /> Weight 20 g.</p> <p><strong>Supported OS:</strong><br /> MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.4.x and higher, Android 8 and above.</p> <p>* Note: The reader only supports contact cards that have visible contacts on the surface. The card without contacts is therefore RFID and cannot be used in the reader.</p> <p><strong>Package contains:</strong><br /> USB Smart Card Reader,<br /> USB-C USB-A adapter,<br /> multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA,<br /> packed in a cardboard box with a hanging hole.</p>

Ribbed aluminum external AXAGON EE25-GTR RIBBED box with USB 3.2 Gen2 interface for 2.5 SATA HDD or SSD. The double-sided USB-C connector on the box together with the supplied USB-C -> USB-A cable and USB-A -> USB-C adapter enables a reliable connection to a computer. Thanks to the fast USB 3.2 Gen 2 interface with a transfer speed of up to 10 Gb/s, the speed of 2.5" SSD disks is not limited. Compared to conventional boxes with a USB 3.2 Gen 1 interface, the transfer speed of this box with SSD disk is about 20% higher. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading S.M.A.R.T. information monitoring the condition of the external drive. Hibernation support for connected disk and box. The inner box frame fixes well and protects the inserted disk. The ribbed aluminum box body helps cool and protect the drive. Rubber feet restrict movement on the table. The elegant box surface prevents unwanted fingerprints. Input: USB 3.2 Gen 2 (USB 3.1 Gen 2) SuperSpeed USB 10 Gbps. Speed up to 10 Gbit/s. Connection via reversible USB type C female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface, supports 2.5" SSD/HDD, max. disk capacity - all without restriction, max. 2.5" disk height 9.5 mm. Other features: Compatible with USB 3.2 Gen 2 (USB 3.1 Gen 2), backward compatible with USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), USB 2.0. Supports transmission rates 10 000 / 5 000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / HighSpeed). Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the box is determined by the SATA interface used (theor. 6 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or sleeping the PC. Connection via USB 3.2 Gen 2 type C female connector. USB Type C male / USB Type A male cable 60 cm long is included. USB-A - USB-C adapter is included. A decent LED indicating the connection to the computer's USB port (permanent light) and data transfer (blinking). Box dimensions 114 x 77 x 16 mm. Weight 100 g. Supported operating systems: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and later, Linux with kernel 2.6.x and later. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: USB-C 3.2 Gen 2 external box for 2.5" SATA disk, USB-C - USB-A cable 60 cm long, USB-A - USB-C adapter, self-adhesive rubber pads, mounting material and screwdriver, multilanguage quick guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

<p><span style="font-size: 14px;"><span style="font-family: trebuchet ms,helvetica,sans-serif;"><strong>Input:</strong><br /> • USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB.<br /> • Speed up to 5 Gbit/s.<br /> • Connection via reversible USB type C female connector.</span></span></p> <p><span style="font-size: 14px;"><span style="font-family: trebuchet ms,helvetica,sans-serif;"><strong>Device support:</strong><br /> • SATA III - 6 Gb/s (600 MB/s) interface,<br /> • Supports 3.5" HDD,<br /> • max. disk capacity - all without restriction,</span></span></p> <p><span style="font-size: 14px;"><span style="font-family: trebuchet ms,helvetica,sans-serif;"><strong>Other features:</strong><br /> • Compatible with USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), backward compatible USB 2.0.<br /> • Supports transmission rates 5 000 / 480 Mbit/s (SuperSpeed / HighSpeed).<br /> • Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s).<br /> • Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s).<br /> • Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s).<br /> • The total bandwidth / transmission rate of the box is determined by the USB interface used (theor. 5 Gbit/s).<br /> • Supports BOT (Bulk-Only Transport).<br /> • Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later.<br /> • Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition.<br /> • SSD boot support in external box.<br /> • Possibility to connect your device while running thanks to the Hot Plug support.<br /> • Full Plug and Play support.<br /> • HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes.<br /> • HDD Turn Off - turns off the disk after removing the device or sleeping the PC.<br /> • Connection via USB 3.2 Gen 1 type C female connector.<br /> • USB-C / USB-A male cable 80 cm long is included.<br /> • USB-A - USB-C adapter is included.<br /> • A decent LED indicating the connection to the computer's USB port (permanent light) and data transfer (blinking).<br /> • Box dimensions 174 x 113 x 33 mm.<br /> • Weight 300 g.</span></span></p> <p><span style="font-size: 14px;"><span style="font-family: trebuchet ms,helvetica,sans-serif;"><strong>Power supply:</strong><br /> • Power supply via a compact external AC/DC adapter 12V - 2A (24 W) with a 150 cm long supply cable.<br /> • On/Off button on the rear panel of the box.<br /> • AC adapter dimensions 81 x 44 x 68 mm (incl. plug).<br /> • AC adapter weight 103 g (incl. supply cable).  </span></span></p> <p><span style="font-size: 14px;"><span style="font-family: trebuchet ms,helvetica,sans-serif;"><strong>Supported operating systems:</strong><br /> • MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and later, Linux with kernel 2.6.x and later.<br /> Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available.</span></span></p> <p><span style="font-size: 14px;"><span style="font-family: trebuchet ms,helvetica,sans-serif;"><strong>Package contains:</strong><br /> • USB-C 3.2 Gen 1 external box for 3.5" SATA disk,<br /> • USB-C - USB-A cable 80 cm long,<br /> • USB-A - USB-C adapter,<br /> • power adapter 100-240V / 12V-2A,<br /> • self-adhesive rubber pads,<br /> • mounting material and screwdriver,</span></span></p>

Ribbed aluminum external AXAGON EE35-GTR RIBBED box with USB 3.2 Gen 1 (USB 3.0) interface for 3.5 SATA HDD. The double-sided USB-C connector on the box together with the supplied USB-C -> USB-A cable and USB-A -> USB-C adapter enables a reliable connection to a computer. Thanks to the USB 3.2 Gen 1 interface, the transfer rate is up to 5 Gbps. SATA 6G interface with UASP support allows you to enjoy the speed of modern disks. Reading S.M.A.R.T. information monitoring the condition of the external drive. Hibernation support for connected disk and box. The inner box frame fixes well and protects the inserted disk. The ribbed aluminum box body helps cool and protect the drive. Rubber feet restrict movement on the table. The elegant box surface prevents unwanted fingerprints. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB. Speed up to 5 Gbit/s. Connection via reversible USB type C female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface, Supports 3.5" HDD, max. disk capacity - all without restriction, Other features: Compatible with USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), backward compatible USB 2.0. Supports transmission rates 5 000 / 480 Mbit/s (SuperSpeed / HighSpeed). Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the box is determined by the USB interface used (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or sleeping the PC. Connection via USB 3.2 Gen 1 type C female connector. USB-C / USB-A male cable 80 cm long is included. USB-A - USB-C adapter is included. A decent LED indicating the connection to the computer's USB port (permanent light) and data transfer (blinking). Box dimensions 174 x 113 x 33 mm. Weight 300 g. Power supply: Power supply via a compact external AC/DC adapter 12V - 2A (24 W) with a 150 cm long supply cable. On/Off button on the rear panel of the box. AC adapter dimensions 81 x 44 x 68 mm (incl. plug). AC adapter weight 103 g (incl. supply cable). Supported operating systems: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and later, Linux with kernel 2.6.x and later.Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: USB-C 3.2 Gen 1 external box for 3.5" SATA disk, USB-C - USB-A cable 80 cm long, USB-A - USB-C adapter, power adapter 100-240V / 12V-2A, self-adhesive rubber pads, mounting material and screwdriver, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

AXAGON HMC-KB-CRL KEYBOARD hub turns your phone, tablet or mini-laptop into a full-fledged computer workplace. You connect your mobile device to the 9in1 docking station via the supplied 60 cm long cable. In no time, you have an integrated keyboard, SD and microSD card reader, and connectors for connecting an external monitor, three USB devices, headphones or headset, and Power Delivery power. However, it is necessary that the USB-C port of your mobile device supports video output (DisplayPort Alternate Mode) and Power Delivery. The keyboard, built into an elegant aluminum hub body, is equipped with chiclet keys with a scissor mechanism and 2 mm stroke for precise and quiet typing. The keyboard offers adjustable backlighting in 5 levels, 12 multimedia keys and the possibility of increasing the inclination for comfortable and ergonomic use. Of course, the keys are printed with Cyrillic localization. The HDMI output enables the connection of an external monitor, TV or projector with a resolution of up to 4K/60Hz Ultra HD, 2K/120Hz Quad HD or 1080p/200Hz Full HD and the transmission of multi-channel audio. Thanks to HDR support, you can enjoy a significantly expanded range of colours and contrasts without limitations. Three USB-A 5Gbps outputs allow connection of external drives (up to 2 at the same time), flash drive, mouse, printer and other USB accessories. The USB ports also charge mobile phones and tablets with a power of up to 7.5W. The memory card reader supports reading and writing of all versions of SD and microSD cards with a capacity of up to 2TB. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The 3.5 mm audio output offers the possibility of connecting stereo headphones, a headset or active speakers. The PD USB-C input is designed for a suitable Power Delivery charger. This allows both your mobile device and the hub to be powered directly from the PD charger using Power Delivery 3.0 technology with up to 100W of power. The Multiport Hub with Keyboard is especially ideal for users of phones and tablets Samsung's DeX-enabled Z-series Fold (from Fold3), Galaxy S (from S9), Note (from Note8) and Galaxy Tab S (from S4 except Lite and FE versions). The Dock also enables desktop mode for the Apple iPad Pro and iPad Air (from 2022) tablets. In addition, it ensures compatibility with iPad mini (from 2021) and with iPhone 15 Pro / Pro Max phones, while the image is transferred via mirroring. Input (connection to mobile device / computer): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C female connector. Compatible with USB 3.2 Gen 2, USB4 and Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 100W port (only for charging), USB-C female connector. Powering the mobile device from the mains adapter via the USB-C hub. PD power must be supported by both the mobile device and the mains charger. USB outputs: 3x USB 5Gbps port, USB-A female connector. USB-C hub handle the connection of two external drives simultaneously. Charging of mobile devices (including iPad) with a current of up to 1.5A from the hub's USB-A ports. Video output: 1x HDMI A port, HDMI A female connector. 4K / UHD resolution 4096 x 2160 at up to 60Hz. 2K / QHD / WQHD resolution 2560 x 1440 at up to 120Hz. 1080p / FHD resolution 1920 x 1080 at up to 200Hz. Support for the above max. supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4. For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10bit/RGB support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Support for 2-channel audio sampling rate up to 192 kHz and up to 24-bit audio - depends on source and end device, i.e. mobile device/computer and TV/monitor/AV receiver. The card reader - two slots: Slot Micro SD: microSD / microSDHC / microSDXC / TransFlash. Slot SD: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro. UHS-I support. Speed up to 104 MB/s. Support hardware ECC function and CRC function. 2 LUN - the reader is indicated as two disk drives. The possibility of copying from card to card. Audio output / input: 1x 3.5 mm 4pin jack for headset, headphones or active speakers, 2-channel analog stereo output 48 kHz @ 16 bit for playback, 1-channel analog mono microphone input 48 kHz @ 16 bit for recording. Keyboard: Keys with scissor mechanism and 2 mm stroke for precise and silent typing. 12 multimedia keys: home, search, brightness, stop / start play / pause, previous / next track, mute, volume, backlight. White key backlight with four intensity settings and backlight off (f12).  Switch between OS: fn+S for Windows / Android, fn+A for macOS / iPadOS / iOS. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminium body for better hub cooling. The LED indicates with constant light the hub connection to the computer. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 296 x 128 x 11 / 6 mm. Weight 353 g (without cable). USB-C cable 60 cm long with connectors C-M straight / C-M bent 90°. Supported operating systems: Microsoft Windows 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on used OS and support from device manufacturer. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C Keyboard hub, USB-C cable 60 cm long, Keyboard hub travel bag,  self-adhesive rubber pads to increase the inclination of the keyboard, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box.

AXAGON HMC-KB-NRD KEYBOARD hub turns your phone, tablet or mini-laptop into a full-fledged computer workplace. You connect your mobile device to the 9in1 docking station via the supplied 60 cm long cable. In no time, you have an integrated keyboard, SD and microSD card reader, and connectors for connecting an external monitor, three USB devices, headphones or headset, and Power Delivery power. However, it is necessary that the USB-C port of your mobile device supports video output (DisplayPort Alternate Mode) and Power Delivery. The keyboard, built into an elegant aluminum hub body, is equipped with chiclet keys with a scissor mechanism and 2 mm stroke for precise and quiet typing. The keyboard offers adjustable backlighting in 5 levels, 12 multimedia keys and the possibility of increasing the inclination for comfortable and ergonomic use. Of course, the keys are printed with Nordic localization. The HDMI output enables the connection of an external monitor, TV or projector with a resolution of up to 4K/60Hz Ultra HD, 2K/120Hz Quad HD or 1080p/200Hz Full HD and the transmission of multi-channel audio. Thanks to HDR support, you can enjoy a significantly expanded range of colours and contrasts without limitations. Three USB-A 5Gbps outputs allow connection of external drives (up to 2 at the same time), flash drive, mouse, printer and other USB accessories. The USB ports also charge mobile phones and tablets with a power of up to 7.5W. The memory card reader supports reading and writing of all versions of SD and microSD cards with a capacity of up to 2TB. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The 3.5 mm audio output offers the possibility of connecting stereo headphones, a headset or active speakers. The PD USB-C input is designed for a suitable Power Delivery charger. This allows both your mobile device and the hub to be powered directly from the PD charger using Power Delivery 3.0 technology with up to 100W of power. The Multiport Hub with Keyboard is especially ideal for users of phones and tablets Samsung's DeX-enabled Z-series Fold (from Fold3), Galaxy S (from S9), Note (from Note8) and Galaxy Tab S (from S4 except Lite and FE versions). The Dock also enables desktop mode for the Apple iPad Pro and iPad Air (from 2022) tablets. In addition, it ensures compatibility with iPad mini (from 2021) and with iPhone 15 Pro / Pro Max phones, while the image is transferred via mirroring. Input (connection to mobile device / computer): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C female connector. Compatible with USB 3.2 Gen 2, USB4 and Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 100W port (only for charging), USB-C female connector. Powering the mobile device from the mains adapter via the USB-C hub. PD power must be supported by both the mobile device and the mains charger. USB outputs: 3x USB 5Gbps port, USB-A female connector. USB-C hub handle the connection of two external drives simultaneously. Charging of mobile devices (including iPad) with a current of up to 1.5A from the hub's USB-A ports. Video output: 1x HDMI A port, HDMI A female connector. 4K / UHD resolution 4096 x 2160 at up to 60Hz. 2K / QHD / WQHD resolution 2560 x 1440 at up to 120Hz. 1080p / FHD resolution 1920 x 1080 at up to 200Hz. Support for the above max. supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4. For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10bit/RGB support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Support for 2-channel audio sampling rate up to 192 kHz and up to 24-bit audio - depends on source and end device, i.e. mobile device/computer and TV/monitor/AV receiver. The card reader - two slots: Slot Micro SD: microSD / microSDHC / microSDXC / TransFlash. Slot SD: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro. UHS-I support. Speed up to 104 MB/s. Support hardware ECC function and CRC function. 2 LUN - the reader is indicated as two disk drives. The possibility of copying from card to card. Audio output / input: 1x 3.5 mm 4pin jack for headset, headphones or active speakers, 2-channel analog stereo output 48 kHz @ 16 bit for playback, 1-channel analog mono microphone input 48 kHz @ 16 bit for recording. Keyboard: Keys with scissor mechanism and 2 mm stroke for precise and silent typing. 12 multimedia keys: home, search, brightness, stop / start play / pause, previous / next track, mute, volume, backlight. White key backlight with four intensity settings and backlight off (f12). Switch between OS: fn+S for Windows / Android, fn+A for macOS / iPadOS / iOS. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminium body for better hub cooling. The LED indicates with constant light the hub connection to the computer. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 296 x 128 x 11 / 6 mm. Weight 353 g (without cable). USB-C cable 60 cm long with connectors C-M straight / C-M bent 90°. Supported operating systems: Microsoft Windows 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on used OS and support from device manufacturer. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C Keyboard hub, USB-C cable 60 cm long, Keyboard hub travel bag, self-adhesive rubber pads to increase the inclination of the keyboard, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box.

AXAGON HMC-KB-US KEYBOARD hub turns your phone, tablet, or mini-laptop into a full-fledged computer workstation. You connect your mobile device to the 9-in-1 docking station via the supplied 60 cm long cable. In no time, you have an integrated keyboard, SD and microSD card reader, and connectors for connecting an external monitor, three USB devices, headphones or headset, and Power Delivery power. However, it is necessary that the USB-C port of your mobile device supports video output (DisplayPort Alternate Mode) and Power Delivery. The keyboard, built into an elegant aluminum hub body, is equipped with chiclet keys with a scissor mechanism and 2 mm stroke for precise and quiet typing. The keyboard offers adjustable backlighting in 5 levels, 12 multimedia keys, and the possibility of increasing the incline for comfortable and ergonomic use. Of course, the keys are printed with English localization. The HDMI output enables connection to an external monitor, TV, or projector with a resolution of up to 4K/60Hz Ultra HD, 2K/120Hz Quad HD, or 1080p/200Hz Full HD and transmits multi-channel audio. Thanks to HDR support, you can enjoy a significantly expanded range of colors and contrasts without limitations. Three USB-A 5Gbps outputs allow the connection of external drives (up to 2 at the same time), flash drive, mouse, printer, and other USB accessories. The USB ports also charge mobile phones and tablets with power up to 7.5W. The memory card reader supports reading and writing of all versions of SD and microSD cards with a capacity of up to 2TB. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The 3.5 mm audio output offers the possibility of connecting stereo headphones, a headset, or active speakers. The PD USB-C input is designed for a suitable Power Delivery charger. This allows both your mobile device and the hub to be powered directly from the PD charger using Power Delivery 3.0 technology with up to 100W of power. The Multiport Hub with Keyboard is especially ideal for users of phones and tablets Samsung’s DeX-enabled Z-series Fold (from Fold3), Galaxy S (from S9), Note (from Note8), and Galaxy Tab S (from S4, except Lite and FE versions). The Dock also enables desktop mode for the Apple iPad Pro and iPad Air (from 2022) tablets. In addition, it ensures compatibility with iPad mini (from 2021) and with iPhone 15 Pro / Pro Max phones, while the image is transferred via mirroring. Input (connection to mobile device / computer): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C female connector. Compatible with USB 3.2 Gen 2, USB4 and Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 100W port (only for charging), USB-C female connector. Powering the mobile device from the mains adapter via the USB-C hub. PD power must be supported by both the mobile device and the mains charger. USB outputs: 3x USB 5Gbps port, USB-A female connector. USB-C hub handles the connection of two external drives simultaneously. Charging of mobile devices (including iPad) with a current of up to 1.5A from the hub's USB-A ports. Video output: 1x HDMI A port, HDMI A female connector. 4K / UHD resolution 4096 x 2160 at up to 60Hz. 2K / QHD / WQHD resolution 2560 x 1440 at up to 120Hz. 1080p / FHD resolution 1920 x 1080 at up to 200Hz. Support for the above max supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4. For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10bit/RGB support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signaling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Support for 2-channel audio sampling rate up to 192 kHz and up to 24-bit audio - depends on source and end device, i.e. mobile device/computer and TV/monitor/AV receiver. The card reader - two slots: Slot Micro SD: microSD / microSDHC / microSDXC / TransFlash. Slot SD: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro. UHS-I support. Speed up to 104 MB/s. Support hardware ECC function and CRC function. 2 LUN - the reader is indicated as two disk drives. The possibility of copying from card to card. Audio output / input: 1x 3.5 mm 4pin jack for headset, headphones or active speakers, 2-channel analog stereo output 48 kHz @ 16 bit for playback, 1-channel analog mono microphone input 48 kHz @ 16 bit for recording. Keyboard: Keys with scissor mechanism and 2 mm stroke for precise and silent typing. 12 multimedia keys: home, search, brightness, stop / start play / pause, previous / next track, mute, volume, backlight. White key backlight with four intensity settings and backlight off (f12). Switch between OS: fn+S for Windows / Android, fn+A for macOS / iPadOS / iOS. Other features: Possibility to connect your device while running thanks to Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminum body for better hub cooling. The LED indicates with constant light the hub connection to the computer. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 296 x 128 x 11 / 6 mm. Weight 353 g (without cable). USB-C cable 60 cm long with connectors C-M straight / C-M bent 90°. Supported operating systems: Microsoft Windows 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on used OS and support from device manufacturer. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C Keyboard hub, USB-C cable 60 cm long, Keyboard hub travel bag, self-adhesive rubber pads to increase the inclination of the keyboard, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box. The version of the hub according to the keyboard layout: HMC-KB-US - American / English layout

<div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">The round USB-C 3.2 Gen 1 (USB 3.0) hub AXAGON HUE-P1C easily and quickly connects up to four USB devices to a laptop or computer at the same time. Three USB ports are located around the perimeter and allow seamless connection of any USB device incl. bulky flash drives or USB readers. The fourth, upper USB port, is ideal for connecting a wireless adapter for better signal reception or for easy insertion of a flash drive with one hand. The rubber pad prevent slipping up on the table. Fixed 30 cm long USB cable is ideal for mobile devices users.</span></span></div> <div> </div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">This compackt hub can also handle the permanent connection of several external drives. The versatility of this USB hub is also enhanced by the built-in micro USB connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply several external disks or increase the number of mobile phones you can charge. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5 Gb/s. The hub will also enable charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Apple iPhone, iPad etc. </span></span></div> <div> </div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. </span></span></div> <div> </div> <div><strong><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">Input:  </span></span></strong></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector. </span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1.</span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• Connecting USB type C male connector on a fixed 30 cm long cable.</span></span></div> <div> </div> <div><strong><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">Outputs:</span></span></strong></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• 4x SuperSpeed USB port, USB-A female connectors.</span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed).</span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s).</span></span></div> <div> </div> <div><strong><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">Features:</span></span></strong></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• Possibility to connect your device while running thanks to the Hot Plug support.</span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• Full Plug and Play support.</span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• Standby mode support.</span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• High quality shielded cable ensures fast communication speed and minimal unwanted interference.</span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• Blue LED indicates the connection to the computer's USB port.</span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• Dimensions Ø 60 x 18 mm.</span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• Weight 43 g (incl. cable).</span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• USB cable length 30 cm.</span></span></div> <div> </div> <div><strong><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">The hub power mode via USB cable (bus power): </span></span></strong></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. </span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• In this power mode, the USB hub is also able to work with up to two magnetic 2.5" external disks simultaneously. </span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.5A at 5V (depending on the capabilities of the computer's USB port).</span></span></div> <div> </div> <div><strong><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">The hub power mode via USB + external USB charger (self power): </span></span></strong></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• Integrated micro USB connector for additional powering the hub.</span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• Any mobile device wall charger (not included) with micro USB connector can be used (recommended output current of the charger min. 2A). </span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• In this power mode, the USB hub is able to work with three magnetic 2.5" external disks. Recommended for connection to smartphones and tablets.</span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports, the total charging current (which is divided into ports) reaches up to 4.5A at 5V (depending on the capabilities of the external power adapter).</span></span></div> <div> </div> <div><strong><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">Supported OS:</span></span></strong></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions.</span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available.</span></span></div> <div> </div>

Thin USB-C 3.2 Gen 1 (USB 3.0) hub AXAGON HUE-F7C with 30 cm long USB cable fast and easy connects up to seven USB devices to the laptop at the same time. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5 Gb/s. The metal hub body is made of aluminum and provides perfect mechanical protection. The elegant finely structured body surface against fingerprint. Fixed 30 cm long USB-C cable is ideal for mobile devices users. The advantage is a separate USB-A port on the front, which is used to connect larger flash disks, readers and other USB devices. The versatility of this USB hub is also enhanced by the built-in micro USB connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply, for example, even more external drives can be connected to the computer or the number of mobile phones charged can be increased. It can handle the permanent connection of several external drives even without an external power supply to the hub. After connecting the external power supply, it is possible to work with five external disks at the same time. Thanks to the Charging hub function, mobile devices can be charged even without connecting to a computer. An unused charger turns this USB hub into a charging hub for free. The hub will enable charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, reader, keyboard and mouse, to the phone or tablet. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type C male connector on a fixed 30 cm long cable. Outputs: 7x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Blue LED indicates the connection to the computer. Dimensions 145 x 42 x 15 mm. Weight 90 g (incl. cable). USB cable length 30 cm. The hub power mode via USB cable (bus power): USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. In this power mode, the USB hub is also able to work with up to 3 magnetic 2.5" external disks simultaneously. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 3A at 5V (depending on the capabilities of the computer's USB port). The hub power mode via USB + external USB charger (self power): Integrated micro USB connector for additional powering the hub. Any mobile device wall charger (not included) with micro USB connector can be used (recommended output current of the charger min. 2A). In this power mode, the USB hub is able to work with up to 5 magnetic 2.5" external disks. However, for reliable long-term operation of the hub, we recommend connecting a maximum of 3 magnetic external 2.5" drives at the same time. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 5A at 5V (depending on the capabilities of the external wall charger). Independent charging hub mode without connecting to a computer (charging hub): After turning off the connected computer or without connecting to the computer, the hub works with power via a USB charger as a separate charging USB hub, just plug a standard charger with a micro USB connector into the hub (micro USB input). Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports, the total charging current (which is divided into ports) reaches up to 3A at 5V (depending on the capabilities of the external power adapter). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SuperSpeed USB hub with fixed 30 cm long USB cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

The AXAGON PCES-SA6 PCI-Express controller extends your desktop PC with six high-speed SATA III ports with a transmission rate up to 6Gb/s. The card equipped with ASMedia chipset not only supports SATA 3.0 specification, but also other SATA technologies such as Hot-Plug, Native Command Queue (NCQ), TRIM, or Port Multiplier. Easy installation without the need to install drivers on most operating systems. Included low profile bracket allow controller installation into standard and also low profile PC cases. Input: PCI-Express 3.0 interface, compatible with PCI-Express 1.0a / 1.1 / 2.0 / 2.1. Number of 2-Lane (x2) lines, compatible with x4 / x8 / x16 PCIe slots. The bandwidth of 2-Lane PCI-Express 3.0 bus 2 GB/s. Output: 6x independent Serial ATA port, SATA III 6G standard. 6x internal 7-pin SATA data connector. Supports all SATA I / SATA II / SATA III optical drives, SSDs and hard disks of all capacities. Other features: Full Plug and Play support. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with the ATA AHCI (Advanced Host Controller Interface) specification revision 1.4. Fully supports Hot Plug connecting and disconnecting of SATA devices while running. Supports Native Command Queuing (NCQ). TRIM feature support for SSD disks. Supports Port Multiplier Command Based Switching. The ASMedia ASM1166 chipset is used. Supported OS: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32- and 64-bit Windows OS versions), Linux with kernel 2.6.x and later. Package contains: PCI-Express SATA controller, low profile brackets, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

<p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">The AXAGON PCES-SJ2 PCI-Express controller extends your desktop PC with two SATA ports with a transmission rate up to 6 Gb/s. </span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">The card equipped with JMicron chipset not only supports SATA 3.0 specification, but also other SATA technologies such as Hot-Plug, Native Command Queue (NCQ), TRIM, or Port Multiplier. </span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">Easy installation without the need to install drivers in most operating systems.</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">Thanks to the included low profile bracket the controller can be fitted into both standard and low profile PC cases. </span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;"><strong>Input:</strong>  <br /> • PCI-Express 3.0 interface, PCI-Express 1.0a / 1.1 / 2.0 /2.1 compatible. <br /> • Number of lines 1-Lane (x1), compatible with x1 / x4 / x8 / x16 PCIe slots. <br /> • A bandwidth of 1-Lane PCI-Express 3.0 bus 2 Gb/s bidirectional. </span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;"><strong>Output:</strong><br /> • 2x independent Serial ATA port, SATA III 6G standard.<br /> • 2x internal 7-pin SATA data connector. <br /> • Supports all SATA I / SATA II / SATA III optical drives, SSDs and hard disks of all capacities.</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;"><strong>Other features:</strong><br /> • Full Plug and Play support. <br /> • Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). <br /> • Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). <br /> • Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). <br /> • Compliant with Serial ATA AHCI (Advanced Host Controller Interface) specification. <br /> • Hot Plug support for connecting and disconnecting SATA devices while running. <br /> • Native Command Queuing (NCQ) support.<br /> • TRIM feature support for SSD disks. <br /> • Port Multiplier Command Based Switching feature support.<br /> • Boot support from connected disk incl. cooperation with computer motherboard BIOS/UEFI.<br /> • The Jmicron JMB582 chipset is used. </span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;"><strong>Supported operating systems:</strong><br /> • MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32- and 64-bit versions of OS Windows), Linux with kernel 2.6.x and above.</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;"><strong>Package contains:</strong><br /> • PCI-Express Gigabit Ethernet card with a standard bracket,<br /> • low profile bracket,</span></span></p>

The AXAGON PCES-SJ2 PCI-Express controller extends your desktop PC with two SATA ports with a transmission rate up to 6 Gb/s. The card equipped with JMicron chipset not only supports SATA 3.0 specification, but also other SATA technologies such as Hot-Plug, Native Command Queue (NCQ), TRIM, or Port Multiplier. Easy installation without the need to install drivers in most operating systems. Thanks to the included low profile bracket the controller can be fitted into both standard and low profile PC cases. Input: PCI-Express 3.0 interface, PCI-Express 1.0a / 1.1 / 2.0 /2.1 compatible. Number of lines 1-Lane (x1), compatible with x1 / x4 / x8 / x16 PCIe slots. A bandwidth of 1-Lane PCI-Express 3.0 bus 2 Gb/s bidirectional. Output: 2x independent Serial ATA port, SATA III 6G standard. 2x internal 7-pin SATA data connector. Supports all SATA I / SATA II / SATA III optical drives, SSDs and hard disks of all capacities. Other features: Full Plug and Play support. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with Serial ATA AHCI (Advanced Host Controller Interface) specification. Hot Plug support for connecting and disconnecting SATA devices while running. Native Command Queuing (NCQ) support. TRIM feature support for SSD disks. Port Multiplier Command Based Switching feature support. Boot support from connected disk incl. cooperation with computer motherboard BIOS/UEFI. The Jmicron JMB582 chipset is used. Supported operating systems: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32- and 64-bit versions of OS Windows), Linux with kernel 2.6.x and above. Package contains: PCI-Express Gigabit Ethernet card with a standard bracket, low profile bracket, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

<p>The <strong>AXAGON PCEU-232RS</strong> PCI-Express card adds <strong>four USB 5Gbps ports to your desktop computer</strong>. The card is designed for fast data transfers at speed up to 5 Gb/s.</p> <p><strong>Two USB-A ports</strong> are taken out to the bracket. You can connect two different USB devices such as printers, keyboards, card readers, flash drives, external HDDs, etc. <strong>Another two ports</strong> (in the form of an internal USB 5Gbps 19pin connector) are integrated on the card board. This allows connection of an internal USB reader or connection of the front USB ports of a PC case. </p> <p>Reliable power supply of the card is provided from the computer power supply via the <strong>SATA power connector</strong>. The USB controller is equipped with a renowned <strong>Renesas</strong> company chipset with proven seamless compatibility and <strong>UASP support</strong>. </p> <p>The package contains a <strong>low-profile bracket</strong> for mounting the adapter into low profile cases.</p> <p><strong>Input:</strong><br /> PCI-Express 2.0 interface, compatible with PCI-Express 1.0a / 1.1 / 2.1. / 3.0 / 4.0.<br /> Number of 1-Lane lines (x1), compatible with x1 / x4 / x8 / x16 PCIe slots.<br /> A bandwidth of 1-Lane PCI-Express 2.0 bus up to 5 Gb/s.</p> <p><strong>Input (power supply):</strong><br /> SATA 15-pin male power connector.</p> <p><strong>Output:</strong><br /> 2x external USB 5Gbps port with USB A-F connectors. <br /> 19-pin internal USB 5Gbps connector with two ports used for example to connect an internal USB reader or the front USB ports of a PC case.  <br /> USB - USB 5Gbps interface - before USB 3.2 Gen 1 / USB 3.0.<br /> Compatible with USB 3.2 Gen 2, backward compatible with USB 2.0 and USB 1.1.<br /> Supports transmission rates 5000 / 480 / 12 / 1.5 Mb/s.<br /> When connected to a PCI-Express bus version 1.0, theor. transmission rate max. 2500 Mb/s. </p> <p><strong>Other features:</strong><br /> Full Plug and Play support.<br /> Supports concurrent activity of SuperSpeed USB, USB 2.0 and USB 1.1 devices. <br /> Compliant with the final official xHCI specification revision 1.0 by USB-IF.<br /> Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. <br /> Fully supports Hot Plug connecting and disconnecting of USB devices while running.<br /> Internal SATA power connector for powering the controller from the PC power supply.<br /> Renesas PD720201 chipset is used.</p> <p><strong>Supported operating systems:</strong><br /> MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 (supported are all 32- and 64-bit Windows OS versions), Linux with kernel 2.6.31 and above. <br /> Note: Drivers are only installed for Windows XP / Vista / 7. For Linux, Windows 8 / 8.1 / 10 / 11, Server 2012 / 2016 / 2019 / 2022 and later versions, no external drivers are required, they are already part of the operating system. </p> <p><strong>Package contains:</strong><br /> PCI-Express card with a standard bracket,<br /> low profile bracket,<br /> multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA,<br /> packed in a cardboard box.</p>

The AXAGON PCEU-232RS PCI-Express card adds four USB 5Gbps ports to your desktop computer. The card is designed for fast data transfers at speed up to 5 Gb/s. Two USB-A ports are taken out to the bracket. You can connect two different USB devices such as printers, keyboards, card readers, flash drives, external HDDs, etc. Another two ports (in the form of an internal USB 5Gbps 19pin connector) are integrated on the card board. This allows connection of an internal USB reader or connection of the front USB ports of a PC case. Reliable power supply of the card is provided from the computer power supply via the SATA power connector. The USB controller is equipped with a renowned Renesas company chipset with proven seamless compatibility and UASP support. The package contains a low-profile bracket for mounting the adapter into low profile cases. Input: PCI-Express 2.0 interface, compatible with PCI-Express 1.0a / 1.1 / 2.1. / 3.0 / 4.0. Number of 1-Lane lines (x1), compatible with x1 / x4 / x8 / x16 PCIe slots. A bandwidth of 1-Lane PCI-Express 2.0 bus up to 5 Gb/s. Input (power supply): SATA 15-pin male power connector. Output: 2x external USB 5Gbps port with USB A-F connectors. 19-pin internal USB 5Gbps connector with two ports used for example to connect an internal USB reader or the front USB ports of a PC case. USB - USB 5Gbps interface - before USB 3.2 Gen 1 / USB 3.0. Compatible with USB 3.2 Gen 2, backward compatible with USB 2.0 and USB 1.1. Supports transmission rates 5000 / 480 / 12 / 1.5 Mb/s. When connected to a PCI-Express bus version 1.0, theor. transmission rate max. 2500 Mb/s. Other features: Full Plug and Play support. Supports concurrent activity of SuperSpeed USB, USB 2.0 and USB 1.1 devices. Compliant with the final official xHCI specification revision 1.0 by USB-IF. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Fully supports Hot Plug connecting and disconnecting of USB devices while running. Internal SATA power connector for powering the controller from the PC power supply. Renesas PD720201 chipset is used. Supported operating systems: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 (supported are all 32- and 64-bit Windows OS versions), Linux with kernel 2.6.31 and above. Note: Drivers are only installed for Windows XP / Vista / 7. For Linux, Windows 8 / 8.1 / 10 / 11, Server 2012 / 2016 / 2019 / 2022 and later versions, no external drivers are required, they are already part of the operating system. Package contains: PCI-Express card with a standard bracket, low profile bracket, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box.

The AXAGON PCEU-430RS PCI-Express card adds four external USB-A 5Gbps ports to your desktop computer. The card is designed for fast data transfers at speeds up to 5 Gb/s. All four USB ports are taken out to the bracket. You can connect four different USB devices such as printers, keyboards, card readers, flash drives, external HDDs, etc. Reliable power supply of the card is provided from the computer power supply via the SATA power connector. The controller is equipped with a renowned Renesas company chipset with proven seamless compatibility and UASP support. Input: PCI-Express 2.0 interface, compatible with PCI-Express 1.0a / 1.1 / 2.1. / 3.0 / 4.0. Number of 1-Lane lines (x1), compatible with x1 / x4 / x8 / x16 PCIe slots. A bandwidth of 1-Lane PCI-Express 2.0 bus up to 5 Gb/s. Input (power supply): SATA 15-pin male power connector. Output: 4x external USB 5Gbps port with USB A-F connectors. USB 5Gbps interface - before USB 3.2 Gen 1 / USB 3.0. Compatible with USB 3.2 Gen 2, backward compatible with USB 2.0 and USB 1.1. Supports transmission rates 5000 / 480 / 12 / 1.5 Mb/s. When connected to a PCI-Express bus version 1.0, theor. transmission rate max. 2500 Mb/s. Other features: Full Plug and Play support. Supports concurrent activity of SuperSpeed USB, USB 2.0 and USB 1.1 devices. Compliant with the final official xHCI specification revision 1.0 by USB-IF. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Fully supports Hot Plug connecting and disconnecting of USB devices while running. Internal SATA power connector for powering the controller from the PC power supply. Renesas PD720201 chipset is used. Supported operating systems: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 (supported are all 32- and 64-bit Windows OS versions), Linux with kernel 2.6.31 and above. Note: Drivers are only installed for Windows XP / Vista / 7. For Linux, Windows 8 / 8.1 / 10, Server 2012 / 2016 / 2019 / 2022 and later versions, no external drivers are required, they are already part of the operating system. Package contains: PCI-Express card with a standard bracket, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box.

The PCI-Express AXAGON PCEM2-ND controller allows you to connect two M.2 SSD drives to a desktop computer and also supports RAID functionality. Its high-quality construction, compact size, and well-thought-out design make the adapter an ideal choice for upgrading a desktop computer that lacks an M.2 slot. It can also be used when there are not enough M.2 slots available. The adapter is universal—compatible with any motherboard and works on motherboards without PCI-Express Bifurcation support. This unique functionality is provided by a quality Asmedia chip. Thanks to the PCI-Express 3.0 interface compatible with x8 and x16 slots, maximum data transfer rates of up to 4000 MB/s (4 GB/s) can be achieved. The adapter supports the use of NVMe (PCI-Express) M.2 SSDs, both single-sided and double-sided. There is no limitation on SSD capacity, and M.2 cards up to 22 x 110 mm can be used. When using shorter drives than 22110, the back of the card can be detached to fit into smaller spaces. The package also includes a low profile bracket for installation in low profile cases. The M.2 controller card also has an integrated PCI-Express slot lock for better grip in the PCIe slot. The lock can be easily broken off if needed. The PCIe adapter supports SW RAID, which can be created using suitable software or integrated OS tools. By setting up RAID 1, you can achieve effective data protection through mirroring. The chip is cooled by a powerful passive heatsink. Heatsinks up to 22 mm wide can be used to cool M.2 drives—AXAGON M.2 heatsinks CLR-M2L3, CLR-M2L6, and CLR-M2L10 are suitable. LED indicators show connection or data transfer in the M.2 slot. Installation is fully automatic and easy for everyone. Input:PCI-Express 3.0 interface, compatible with PCI-Express: 4.0 / 3.0 / 2.1 / 2.0 / 1.1 / 1.0a.Number of lanes: 8-Lane, compatible with x8 / x16 PCIe slots. Output:2x NGFF 75-pin M-key slot for installing an NVMe (PCI-Express) M.2 SSD. Other features:Full Plug and Play support.Simultaneous operation of both drives even on motherboards without PCIe Bifurcation support.Supports M.2 drives in sizes 2230, 2242, 2260, 2280, and 22110 mm.The detachable back of the card allows use in small spaces—in this case, a 22110 drive cannot be mounted.Supports M key or B+M key NVMe (PCI-Express) M.2 SSDs with no maximum capacity limit.Supports both single-sided and double-sided M.2 drives.Supports booting from an SSD.The actual box bandwidth/transfer rate is around 3500 MB/s (3.5 GB/s), determined by the limits of the PCI-Express 3.0 interface.RAID SW support—enables software RAID creation using suitable software or operating system tools.Integrated PCI-E slot lock for better card grip—can be broken off if necessary.Possibility to mount heatsinks on drives in both slots. Maximum heatsink width is 22 mm—compatible with AXAGON CLR-M2L3, CLR-M2L6, and CLR-M2L10 heatsinks.No driver installation required.Powered directly from the PCI-Express bus; no external power supply required.Dual LED indicators show connection or data transfer in M.2 slots.Dimensions: 180 x 64 x 20 mm.Weight: 75 g. Supported operating systems:MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 R2 / 2012 / 2016 / 2019 / 2022 and later (all 32- and 64-bit versions of Windows supported), and Linux with kernel 2.6.31 and higher.Note: For Windows 7, please check OS support and driver availability with the M.2 SSD manufacturer. Package contains:PCI-Express adapter with a standard bracket,low profile bracket,mounting hardware,printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA,packaged in cardboard.

AXAGON PCEE-GIX PCI-Express network card adds high speed Gigabit Ethernet connection to your desktop computer. It is backward compatible with 10/100Base-T networks. The network card is equipped with powerful Intel I210AT chipset. It offers many advanced features e.g. precise time synchronization, traffic shaping for AV streams, processor load reduction features and support for a wide range of power management. The LAN adapter supports network boot (PXE) and ensures seamless compatibility with most operating systems. Gigabit network card connects the computer to the Internet or a computer network, adds the missing RJ-45 connector, add another network card or replaces the original defunct network connection. In addition to an adapter with a standard size bracket, the package also includes a low profile bracket which allows the mounting into low profile cases. Input: PCI-Express 2.1 interface, PCI-Express 1.0a / 1.1 / 2.0 / 3.0 compatible. Number of lines 1-Lane (x1), compatible with x1 / x4 / x8 / x16 PCIe slots. A bandwidth of 1-Lane PCI-Express 2.1 bus 5 Gb/s. Output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. Other features: Full Plug and Play support. 10/100/1000 Mbit/s auto-detection. Supports TCP/UDP, IPv4 checksum, IPv6 IP/TCP and IP/UDP checksum offload (Rx/ Tx/Large- send) to reduce processor load. Supports full-duplex transmission with IEEE 802.3x and IEEE 802.3z flow control. Supports IEEE 802.3az-2010 (EEE) Energy Efficient Ethernet - reduce power consumption at standby. Supports quad core Receive-Side Scaling (RSS) for Windows - up to four queues per port. Supports Auto MDI/MDIX - crossover detection and auto-correction eliminate the need for crossover cables. Supports hardware ECC (Error Correction Code) function. Supports Jumbo frames (up to 9.5 kB). Supports IEEE 1588/802.1AS Timestamping precise time synchronization HW support. Supports IEEE 802.1Qav - routing and queuing of time-sensitive flows. Supports IEEE 802.1BA (802.1 AVB) - improves synchronization, reliability and latency of audio visual transmissions over the network. Offers a wider range of management options in a corporate environment. Network boot support thanks to integrated PXE. Supports IEEE 802.1Q VLAN. Two LEDs for indicating activity and connection to gigabit network. The Intel I210-AT chipset is used. Wake-on-LAN support in various modes: Supports sleep mode and remote wake up via Magic packet. Supports ECMA-393 proxZzzy standard for sleeping hosts to manage the network connection of sleeping guests using proxy servers. Advanced Power Management features:The network card supports advanced power management to reduce losses during standby or light traffic on the network. It also supports advanced power saving when the Ethernet cable has been disconnected. Supports Advanced Configuration Power management Interface (ACPI). Supports Advanced Power Management (APM). Supports Active State Power Management (ASPM). Supports PCI MSI (Message Signaled Interrupt) and MSI-X. Supported operating systems:MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 R2 / 2012 / 2012 R2 / 2016 / 2019 / 2022 and later (supported are all 32- and 64-bit versions of OS Windows), Linux kernel 2.6.30 and later, FreeBSD 10.x/11.x/12.x. Package contains: PCI-Express Gigabit Ethernet card with a standard bracket, low profile bracket, installation quick guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box.

The AXAGON PCES-SA4X4 PCI-Express controller expands your desktop PC with four SATA III ports with a transfer rate of up to 6Gb/s. The card, equipped with an ASMedia chipset, supports not only the SATA 3.0 specification, but also other SATA technologies such as Hot-Plug, Native Command Queue (NCQ), TRIM, and Port Multiplier. Easy installation without the need to install drivers on most operating systems. The included low-profile bracket allows the controller to be installed in both standard and low-profile PC cases. Input: PCI-Express 3.0 interface, compatible with PCI-Express 1.0a / 1.1 / 2.0 / 2.1. Number of 2-Lane (x2) lines, compatible with x4 / x8 / x16 PCIe slots. 2-Lane PCI-Express 3.0 bus bandwidth: 4 GB/s bidirectional. Output: 4x independent Serial ATA ports, SATA III 6G standard. 4x internal 7-pin SATA data connectors. Supports all SATA I / SATA II / SATA III optical drives, SSDs, and hard drives of all capacities. Other features: Full Plug and Play support. Compliant with the Serial ATA 3.0 specification (SATA/600), transfer rates of up to 6 Gb/s (600 MB/s). Compliant with the Serial ATA 2.0 specification (SATA/300), transfer rates of up to 3 Gb/s (300 MB/s). Compliant with the Serial ATA 1.0 specification (SATA/150), transfer rates of up to 1.5 Gb/s (150 MB/s). Compliant with the ATA AHCI (Advanced Host Controller Interface) specification revision 1.4. Full support for Hot Plug connection and disconnection of SATA devices while running. Supports Native Command Queuing (NCQ). Supports the TRIM feature for SSDs. Supports the Port Multiplier Command Based Switching feature. Boot support from a connected disk, including cooperation with the computer motherboard BIOS / UEFI. 4x LEDs indicating activity of connected disks. Four 2-pin sockets for connecting the HDD LEDs of the computer case. Uses the ASMedia ASM1164 chipset. Supported OS: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32-bit and 64-bit Windows OS versions are supported), Linux with kernel 2.6.x and above. Package contains: PCI-Express controller with standard bracket, low-profile bracket, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

Compact ID card & memory card reader in one! With the Axagon card reader CRE-SMP2A, you can do the necessary operations with ID cards as well as SD / MMC / microSD memory cards and, in addition, with SIM cards. Thanks to the SIM card slot, which includes SIM card management software and SD and microSD card slots, you can also use the reader for backup and data transfer.Compatibility with all common operating systems such as Windows, Linux, Mac OS and Android allows for widespread use on desktops and laptops as well as smartphones and tablets. The set also includes a USB-C adapter for connecting to devices with a USB-C socket. Card reader: Four-slot reader with support for the following formats: Smart Card slot supports ATM / CAC / ID / IC / SIS contact cards, Micro SD slot supports microSD / microSDHC / microSDXC / TransFlash cards, SD slot supports SecureDigital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter miniSD, miniSDHC, MMC Micro cards SIM slot supports standard size SIM cards (microSIM and nanoSIM with the appropriate adapter). Smart card specification support: Supports ISO 7816 Class A, B and C contact Smart cards (5V, 3V and 1.8V). Supports ISO 7816, EMV 4.1 (EMV 2000 level 1) standards. Supports protocols T=0 and T=1, I2C, SLE 4432/42 (S=10), SLE 4418/28 (S=9). PC/SC 2.0 PC Smart Card standard support. Microsoft Smart Card for Windows support. Supports I2C cards SLE4418, SLE4428, SLE4432, SLE4442, SLE4436, SLE5536, SLE6636, AT88SC1608, AT45D041. Microsoft WHQL USB Smart Card Reader compliant. FIPS 201 standard compliant. Supports flash card specifications: SD 1.0/1.1 (SD - Secure Digital, up to 2GB) standard compliant. SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB) standard compliant. SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB) standard compliant. MMC a eMMC 3.x/4.0/4.1/4.2 standard compliant. Other features: Microsoft USB-CCID driver compatible. Plug and Play support. Allows the use of SIM and microSD slot at the same time. SW SIMedit for editing and backing up contacts can be downloaded from the product support tab at www.axagon.eu. Smart card insertion detection. Standby support, automatic standby mode. Reader power via USB bus (bus-power). A LED indicates computer USB port connection (steady) and data transfer (flashing). Dimensions 80 × 30 × 15 mm Weight: 20 grams Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.4.x and higher, Android 8 and above. * Note: The reader only supports contact cards that have visible contacts on the surface. The card without contacts is therefore RFID and cannot be used in the reader.

Compact desktop smart card / ID card reader Axagon CRE-SM3SD FlatReader with USB 2.0 interface includes additional slots for SD, microSD and SIM cards. The card reader supports all common contact smart card formats, chip cards and other cards, including contact bank payment cards or contact electronic ID cards. The reader is compatible with most national applications for eID (electronic ID cards).Thanks to the SIM card slot including SIM management software, SD and microSD card slots, the reader can also be used for backup and data transfer. Compatibility with all common OS such as Windows, Linux, Mac OS and Android, allows wide use on desktops and laptops as well as phones and tablets. The smart LED indicator lights up shortly after the activity change, then turns off and doesn't bother the user with unnecessary light. Compact design, high-quality manufacturing, anti-slip pads and long cable ensure easy and trouble-free use. Smart card reader with memory card and SIM card slots Smart Card slot supports ATM / CAC / ID / IC / SIS contact cards microSD slot supports microSD / microSDHC / microSDXC / TransFlash SD slot supports SD / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter miniSD, miniSDHC, MMC Micro cards SIM slot supports standard size SIM cards (microSIM and nanoSIM with the appropriate adapter) SIM and microSD slots can be used at the same time Connects to the computer via USB 2.0 connection (backward compatible with USB 1.1) Compatible with Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux 2.4.x and higher, Android 8 and above Simple Plug and Play connection LED indicator shows connection and data transfer status Anti-slip pad against spontaneous movement on the table Dimensions: 67 × 63 × 20 mm Long cable: 1.3 m Weight: 60 g