PLA Rainbow Pastel filament Refill from Rosa3D. PLA (polylactide) is a durable and easy-to-use filament, ideal for beginners in 3D printing.PLA Rainbow is a unique blend of PLA (polylactide)-based materials. Each spool contains several smoothly changing colors. This makes the print made of filament from the PLA Rainbow product line unique.Application:decorations (e.g. interior design elements such as lamp shades or vases)toys (e.g. figurines)gadgets (e.g. key rings, pendants)printing personalized gifts.PLA Rainbow Pastel is an unique combination of seven smoothly transitioning colors, known from the PLA Pastel range: peach, pink, lavender, blue, mint, green and yellow. A full color cycle is contained in ~80m of filament (~240g). The 1kg ReFill PLA Pastel Rainbow contains over 4 full cycles of colors transitions.ATTENTION! The frequency and sequence of color transitions is fixed for a given production batch. A single spool may start at any point in the process, e.g. one spool may start red and another spool orange. Shade differences are allowed. Printable model for refill spool sides you can download here:Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: deep red, luminous orange and golden tonesDiameter: 1.75 mmWeight: 1000 g (vacuum packed)Density: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa
PLA Magic Silk is a 3D printing filament based on PLA-Silk. PLA Magic Silk is a 3D printing filament based on PLA-Silk. PLA Magic Silk Treasure combines three parallel colours in a single filament (gold, copper and bronze) as a result of the coextrusion process. Application: decorations (e.g. interior design elements such as lamp shades or vases) toys (e.g. figurines) gadgets (e.g. key rings, pendants) printing personalized gifts. Printable model for refill spool sides you can download here: Recommended printing parameters: extrusion temperature 195-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. PRODUCT PARAMETERS Color: gold / silver Diameter: 1.75 mm Weight: 1000 g (vacuum packed) Density: 1.24 g/cm3 Odor: odorless Heat deformation temperature: 55°C (ASTM E2092) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,05 Tensile elongation: 6 % Tensile strength (to break): 53 MPa
PLA Magic Silk is a 3D printing filament based on PLA-Silk. PLA Magic Silk Mistic Purple combines two parallel colors in a single filament (graphite and fuchsia) as a result of the coextrusion process.Application:decorations (e.g. interior design elements such as lamp shades or vases)toys (e.g. figurines)gadgets (e.g. key rings, pendants)printing personalized gifts.Printable model for refill spool sides you can download here:Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: graphite / fuchsiaDiameter: 1.75 mmWeight: 1000 g (vacuum packed)Density: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa
PLA Magic Silk is a 3D printing filament based on PLA-Silk. PLA Magic Silk mistic red combines two parallel colors in a single filament (red and black) as a result of the coextrusion process.Application:decorations (e.g. interior design elements such as lamp shades or vases)toys (e.g. figurines)gadgets (e.g. key rings, pendants)printing personalized gifts.Printable model for refill spool sides you can download here:Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: red/blackDiameter: 1.75 mmWeight: 1000 g (vacuum packed)Density: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa
PLA Starter filament by Rosa3D was created for beginners of 3D printing. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors.PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product. Printable model for refill spool sides you can download here:Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: whiteDiameter: 1.75 mmWeight: 1000 g (vacuum packed) refill packing without plastic spoolDensity: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa
PLA Starter filament by Rosa3D was created for beginners of 3D printing. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors.PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product.Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: whiteDiameter: 1.75 mmWeight: 1000 g (vacuum packed)Density: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa
PLA Starter filament by Rosa3D was created for beginners of 3D printng. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors.PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product.Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: whiteDiameter: 1.75 mmWeight: 3 kg (vacuum packed)Density: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa
PLA Starter filament by Rosa3D was created for beginners of 3D printing. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors.PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product. Printable model for refill spool sides you can download here:Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: greenDiameter: 1.75 mmWeight: 1000 g (vacuum packed)Density: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa
ROSA-Flex 85A is a technical TPU filament. It can be used wherever elements resistant to chemical reagents and mechanical damage are needed. Printouts made of this material can be squeezed and stretched many times without damaging the original shape. The material is characterized by both excellent interlayer adhesion and adhesion to many work surfaces.Application examples:gaskets, bumpers, anti-vibration dampers/feetsmartphone cases and devices housingscomponents for dronescomponents for RC carsROSA-flex 85A is a thermoplastic polyurethane from ROSA3D. The material is designed for technical applications. Thanks to its flexibility and outstanding interlayer adhesion, it is suitable for all applications where mechanical resistance and tensile strength are required. It can be repeatedly squeezed and stretched without changing it’s original shape. The filament is characterized by exceptional chemical resistance. It is resistant to greases, oils and many solvents. The complete chemical resistance table can be found in ‘files to download’ section.The filament is intended for intermediate users who already have experience with 3D printing.Recommended printing parameters:extrusion temperature: 215-250 ° Cbed temperature: 30-60 ° Cprint cooling: 0-100% (depends on the geometry of the model)printing speed: 15-50 mm/s (we recommend starting slowly and gradually trying to increase the speed)compatible bed surfaces: glass, smooth PEI, textured PEI.Filament does not require a heated bed or chamber. In case of problems with adhesion, we recommend the use of an adhesive agent. It is recommended to enable print cooling. Fan speed should be adjusted according to printer capabilities and geometry of the printed object.PRODUCT PARAMETERS:Diameter: 1.75 mmNet weight: 500 gSpool weight: 245 gROSA-Flex 85A PHYSICAL PARAMETERS:Density: 1.18 g / cm3Odor: odorlessElongation at break: 520%
ROSA-Flex 96A is a technical TPU filament. It can be used wherever elements resistant to chemical reagents and mechanical damage are needed. Printouts made of this material can be squeezed and stretched many times without damaging the original shape. The material is characterized by both excellent interlayer adhesion and adhesion to many work surfaces.Application examples:gaskets, bumpers, anti-vibration dampers/feetsmartphone cases and devices housingscomponents for dronescomponents for RC carsROSA-flex 96A is a thermoplastic polyurethane from ROSA3D. The material is designed for technical applications. Thanks to its flexibility and outstanding interlayer adhesion, it is suitable for all applications where mechanical resistance and tensile strength are required. It can be repeatedly squeezed and stretched without changing it’s original shape. The filament is characterized by exceptional chemical resistance. It is resistant to greases, oils and many solvents. The complete chemical resistance table can be found in ‘files to download’ section.What’s more, the ROSA-Flex 96A filament is made of ingredients approved for contact with food. In case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product.Recommended printing parameters:extrusion temperature: 210-250 ° Cbed temperature: 50-70 ° Cprint cooling: 0-100% (depends on the geometry of the model)printing speed: 15-50 mm/s (we recommend starting slowly and gradually trying to increase the speed)compatible bed surfaces: glass, smooth PEI, textured PEI.Filament does not require a heated bed or chamber. In case of problems with adhesion, we recommend the use of an adhesive agent. It is recommended to enable print cooling. Fan speed should be adjusted according to printer capabilities and geometry of the printed object.PRODUCT PARAMETERS:Diameter: 1.75 mmNet weight: 500 gSpool weight: 245 gROSA-Flex 85A PHYSICAL PARAMETERS:Density: 1.22 g / cm3Odor: odorlessElongation at break: 350%
ROSA-Flex 96A is a thermoplastic polyurethane (TPU). It is intended for intermediate users of 3D printers who want to start their adventure with printing from flexible materials. The ROSA-Flex 96A filament is hard enough to be printed even on printers with Bowden feeding. In addition, it does not require a closed chamber and will easily stick to many work surfaces (eg. glass, smooth PEI, textured PEI, alluminum). ROSA-Flex 96A has excellent interlayer adhesion. Filament made of TPU will be perfect if you need elements resistant to chemical reagents and mechanical damage. Prints can be squeezed and stretched many times without permanently changing their original shape. You can print use it to print a protective case for your smartphone in one of the many vivid colors. ROSA-Flex 96A is a durable technical material, resistant to oils, greases and many solvents. What's more, ROSA-Flex 96A filament was made of components approved for contact with food, complying with FDA 21CFR177.2600 and the amendment of the Commission (EU) 10/2011. For products that come into contact with food, the certification lies with the manufacturer of the final product. APPLICATIONHobby: smartphone cases, drone elements, elements for RC carsTechnical: gaskets, bumpers, anti-vibration dampers / feet, housings, orthoses HOW TO PRINTRecommended printing temperature 220-250°CRecommended bed temperature: 30-60°CRecommended cooling:50-100% (depends on the geometry of the model)Recommended print speed: 15-50 mm/s (we recommend starting slowly and gradually trying to increase the speed)Compatible bed materials: glass, smooth PEI, textured PEI, alluminum. TECHNICAL PARAMETERSDiameter 1.75 mmDiameter tolerance +/- 0.05 mmOval tolerance +/- 0.02 mmNet weight 1000 gPrint temperature 220-250 °CBed temperature 30-60 °C HYSICAL PARAMETERSDensity 1,22 g/cm3Odor OdorlessTensile elongation 350 % (EN 12803)Vicat softening point 126°C (ISO 306)
ROSA-Flex 96A is a technical TPU filament. It can be used wherever elements resistant to chemical reagents and mechanical damage are needed. Printouts made of this material can be squeezed and stretched many times without damaging the original shape. The material is characterized by both excellent interlayer adhesion and adhesion to many work surfaces.Application examples:gaskets, bumpers, anti-vibration dampers/feetsmartphone cases and devices housingscomponents for dronescomponents for RC carsROSA-flex 96A is a thermoplastic polyurethane from ROSA3D. The material is designed for technical applications. Thanks to its flexibility and outstanding interlayer adhesion, it is suitable for all applications where mechanical resistance and tensile strength are required. It can be repeatedly squeezed and stretched without changing it’s original shape. The filament is characterized by exceptional chemical resistance. It is resistant to greases, oils and many solvents. The complete chemical resistance table can be found in ‘files to download’ section.What’s more, the ROSA-Flex 96A filament is made of ingredients approved for contact with food. In case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product.Recommended printing parameters:extrusion temperature: 210-250 ° Cbed temperature: 50-70 ° Cprint cooling: 0-100% (depends on the geometry of the model)printing speed: 15-50 mm/s (we recommend starting slowly and gradually trying to increase the speed)compatible bed surfaces: glass, smooth PEI, textured PEI.Filament does not require a heated bed or chamber. In case of problems with adhesion, we recommend the use of an adhesive agent. It is recommended to enable print cooling. Fan speed should be adjusted according to printer capabilities and geometry of the printed object.PRODUCT PARAMETERS:Diameter: 1.75 mmNet weight: 500 gSpool weight: 245 gROSA-Flex 85A PHYSICAL PARAMETERS:Density: 1.22 g / cm3Odor: odorlessElongation at break: 350%
ROSA-Flex 96A is a thermoplastic polyurethane (TPU). It is intended for intermediate users of 3D printers who want to start their adventure with printing from flexible materials. The ROSA-Flex 96A filament is hard enough to be printed even on printers with Bowden feeding. In addition, it does not require a closed chamber and will easily stick to many work surfaces (eg. glass, smooth PEI, textured PEI, alluminum). ROSA-Flex 96A has excellent interlayer adhesion. Filament made of TPU will be perfect if you need elements resistant to chemical reagents and mechanical damage. Prints can be squeezed and stretched many times without permanently changing their original shape. You can print use it to print a protective case for your smartphone in one of the many vivid colors. ROSA-Flex 96A is a durable technical material, resistant to oils, greases and many solvents. What's more, ROSA-Flex 96A filament was made of components approved for contact with food, complying with FDA 21CFR177.2600 and the amendment of the Commission (EU) 10/2011. For products that come into contact with food, the certification lies with the manufacturer of the final product. APPLICATIONHobby: smartphone cases, drone elements, elements for RC carsTechnical: gaskets, bumpers, anti-vibration dampers / feet, housings, orthoses HOW TO PRINTRecommended printing temperature 220-250°CRecommended bed temperature: 30-60°CRecommended cooling:50-100% (depends on the geometry of the model)Recommended print speed: 15-50 mm/s (we recommend starting slowly and gradually trying to increase the speed)Compatible bed materials: glass, smooth PEI, textured PEI, alluminum. TECHNICAL PARAMETERSDiameter 1.75 mmDiameter tolerance +/- 0.05 mmOval tolerance +/- 0.02 mmNet weight 1000 gPrint temperature 220-250 °CBed temperature 30-60 °C HYSICAL PARAMETERSDensity 1,22 g/cm3Odor OdorlessTensile elongation 350 % (EN 12803)Vicat softening point 126°C (ISO 306)
ROSA-Flex 96A Green / Glow in the Dark Green – Flexible 3D Printer Filament (1.75 mm, 0.5 kg) ROSA-Flex 96A Green / Glow in the Dark Green is a high-quality, flexible TPU 3D printing filament with a hardness of 96A that combines excellent elasticity with strong mechanical resistance. It glows green in the dark after exposure to light – perfect for functional and decorative prints that need visibility in low light. Key Features Flexible and Durable: TPU material with 96A shore hardness provides flexibility and resistance to bending and mechanical stress. Glow in the Dark: Emits a green phosphorescent glow after exposure to natural or artificial light – great for creative, visibility-focused projects. Excellent Layer Adhesion: Reliable bonding between layers for strong, lasting prints. Wide Compatibility: Works with most FDM/FFF 3D printers; does not require a closed chamber. Recommended Hardened Nozzle: Glow-in-the-dark additives can be slightly abrasive, so a hardened nozzle is recommended for extended use. Technical Specifications Material TPU (Thermoplastic Polyurethane) Hardness 96A Color Green / Glow in the Dark Diameter 1.75 mm Net Weight 0.5 kg Print Temperature 220–250 °C Heated Bed 30–60 °C Cooled Fan 30–60 % Chamber Requirement Not required Recommended Nozzle Hardened steel Recommended Printing Parameters Extrusion temperature: 220–250 °C Bed temperature: 30–60 °C Cooling fan: 30–60 % (depending on geometry) Print speed: 15–50 mm/s recommended to start slowly and fine-tune for best results. Applications ROSA-Flex 96A filament is ideal for flexible parts that also need visibility in low light, such as wearable accessories, keychains, cases, grips, signage, toys and functional prototypes with elasticity and glow effects. Package Contents 1 × 0.5 kg spool of ROSA-Flex 96A Green / Glow in the Dark Green filament Vacuum-sealed packaging with desiccant to keep filament dry
ROSA-Flex 96A is a thermoplastic polyurethane (TPU). It is intended for intermediate users of 3D printers who want to start their adventure with printing from flexible materials. The ROSA-Flex 96A filament is hard enough to be printed even on printers with Bowden feeding. In addition, it does not require a closed chamber and will easily stick to many work surfaces (eg. glass, smooth PEI, textured PEI, alluminum). ROSA-Flex 96A has excellent interlayer adhesion. Filament made of TPU will be perfect if you need elements resistant to chemical reagents and mechanical damage. Prints can be squeezed and stretched many times without permanently changing their original shape. You can print use it to print a protective case for your smartphone in one of the many vivid colors. ROSA-Flex 96A is a durable technical material, resistant to oils, greases and many solvents. What's more, ROSA-Flex 96A filament was made of components approved for contact with food, complying with FDA 21CFR177.2600 and the amendment of the Commission (EU) 10/2011. For products that come into contact with food, the certification lies with the manufacturer of the final product. APPLICATIONHobby: smartphone cases, drone elements, elements for RC carsTechnical: gaskets, bumpers, anti-vibration dampers / feet, housings, orthoses HOW TO PRINTRecommended printing temperature 220-250°CRecommended bed temperature: 30-60°CRecommended cooling:50-100% (depends on the geometry of the model)Recommended print speed: 15-50 mm/s (we recommend starting slowly and gradually trying to increase the speed)Compatible bed materials: glass, smooth PEI, textured PEI, alluminum. TECHNICAL PARAMETERSDiameter 1.75 mmDiameter tolerance +/- 0.05 mmOval tolerance +/- 0.02 mmNet weight 500 gPrint temperature 220-250 °CBed temperature 30-60 °C HYSICAL PARAMETERSDensity 1,22 g/cm3Odor OdorlessTensile elongation 350 % (EN 12803)Vicat softening point 126°C (ISO 306)
Tootekood: CRE-4005010100GTIN: 69779057412363D-printerid ja tarvikud
Creality SpacePi X4 filamentkuivati on loodud selleks, et säilitada teie 3D-printimise filamentide kvaliteet, hoides neid kuivad ja niiskuseta. Tänu täiustatud kuivatamissüsteemile tagab see kuivati optimaalse jõudluse erinevat tüüpi filamentide, sealhulgas PLA, ABS ja PETG, jaoks ning on seega iga 3D-printeri omaniku oluline tööriist.EsiletõstetudHoia filamentid kuivad, et vältida printimisprobleemeÜhilduv mitmesuguste filamentitüüpidega, sealhulgas PLA, ABS ja PETGSuur kuivatamisvõimsus, mis võimaldab töödelda kuni 4 rulli.Reguleeritav temperatuur ja kuivatamisaja, pakkudes paindlikkustLihtne konstruktsioon mugavaks hoiustamiseks ja transportimiseksSobib nii koduseks kui ka professionaalseks kasutamiseks
Easy Operation: One-button Vacuuming by using an electric pump, saves your time as well as improves the efficiency. Strong suction for fast pumping, small, portable, pumping speed is 3000mL/min and suction power is up to 60Kpa. Built-in rechargeable battery, no need to plug in during use, easy one-handed operation without wire entanglement. Improved Print Quality: 3D printing filaments have hygroscopicity, moisture can cause printing failure. Use a vacuum bag to create a vacuum environment to preventing the filament from absorbing moisture and dust. Maintain the integrity and quality of the filament, thereby effectively solving problems such as filament drawing, blockage, and poor adhesion during printing and improving printing quality. Durable and Recycling: Made of thickened material bags flexible and durable not easy to deform or break. Design using double sealed zippers and air vents with sealed covers. After strict material selection and testing, these storage bags is reliable, durable, and reusable, ensuring a stable vacuum sealing effect, allowing you to store your filaments with confidence. Large Size Vacuum Bags: Creality 3D printer filament vacuum storage bags is a large size of 40x40cm. Compatible with all 0.5KG/0.75KG/1KG or 1.75mm/2.85mm/3mm filaments and all kinds of filament like PLA ABS PETG TPU PA Silk PLA Plus. Creality Filament Storage Vacuum Bag kit includes: 40*40CM sealed bag 8pcs Desiccant 8pcs Electric vacuum pump 1pcs Vacuum pumping spiral head 1pcs Ball inflatable nozzle 1pcs Swimming ring inflatable nozzle 1pcs Toy inflatable nozzle 1pcs Charging cable 1pcs
Printer filament 3D PLA/1.75mm/marble Due to the ease of printing, it is most often used by beginner amateurs of 3D printing Designed for all 3D printers on the market open to materials from different manufacturers It does not require a heated printer worktop
PLA (polylactide) is a biodegradable thermoplastic polyester, which is easy to print for variety 3D printers. It has no odor, a lower melting point and good flowbility, no need to post-treatment.PLA-plus plastic variant has a bit higher hardness and toughness than regular PLA, and is more environmental friendly, also it is not so easy warped while printing.
Acrylonitrile butadiene styrene (ABS) is a common thermoplastic strong, flexible durable plastic. ABS is the plastic used in lots of things around us and is perfect for heated plastic extrusion 3D printing.
PLA (polylactide) is a biodegradable thermoplastic polyester, which is easy to print for variety 3D printers. It has no odor, a lower melting point and good flowability, no need to post-treatment.PLA-plus plastic variant has a bit higher hardness and toughness than regular PLA, and is more environmental friendly, also it is not so easy warped while printing.
PLA (polylactide) is a biodegradable thermoplastic polyester, which is easy to print for variety 3D printers. It has no odor, a lower melting point and good flowbility, no need to post-treatment.
PLA (polylactide) is a biodegradable thermoplastic polyester, which is easy to print for variety 3D printers. It has no odor, a lower melting point and good flowbility, no need to post-treatment.
PLA (polylactide) is a biodegradable thermoplastic polyester, which is easy to print for variety 3D printers. It has no odor, a lower melting point and good flowability, and needs no post-treatment.
VERSATILE & EASY TO USE PLA (polylactide) is a biodegradable thermoplastic polyester, which is easy to print for variety 3D printers. It has no odor, a lower melting point and good flowbility, no need to post-treatment.
Gembird's PVA filament is designed for 3D printing, perfect for creating intricate models with support structures that dissolve in water. This filament has a diameter of 1.75 mm and is delivered on a spool measuring 200 mm in diameter and 67 mm in width. Each spool contains 1 kg of filament, with a length of 340 m to ensure extended printing sessions. Operating at a melting temperature of 168 °C, this PVA filament is compatible with fused deposition modeling technology, making it a reliable choice for avid 3D printers. It meets ISO 9002 and RoHS standards, ensuring quality and safety in every print.
Acrylonitrile butadiene styrene (ABS) is a common thermoplastic strong, flexible durable plastic. ABS is the plastic used in lots of things around us and is perfect for heated plastic extrusion 3D printing.
<p>Flashforge ABS filament is designed for high‑quality 3D printing. With a 3mm diameter and 1kg spool, it delivers strong, durable, and precise prints. The white color provides a clean finish, ideal for prototypes, functional parts, and design projects. ABS material offers excellent toughness, heat resistance, and machinability, making it suitable for professional and hobbyist use.</p>
