Kõik hinnakirjad

Kaitse enda telefoni ekraani kriimustuste ja löökide eest selle kile ning klaasi hübriidsegust valmistatud õhukese kaitseklaasiga. Ohutu ja vastupidavKile ning klaasi

Õhupuhastaja Boneco AP200 Allergy Pro Envion AP200

Sobib mudelile HUAWEI P20 PRO. Tootepildid on illustreeriva tähendusega. Tegelik toote värv võib pisut erineda pildil olevast. <p>Tootepildid on illustreeriva tähendusega. Tegelik toote värv võib pisut erineda pildil olevast.</p>

Ekraani suurus:6.7&apos;&apos;; Põhikaamera:108 MP; Telefoni sisseehitatud mälu:1 TB; Protsessor:MediaTek Dimensity 8200; Operatiivmälu (RAM):24 GB; Aku mahutavus:8800

Ekraani suurus:6.7&apos;&apos;; Põhikaamera:108 MP; Telefoni sisseehitatud mälu:1 TB; Protsessor:MediaTek Dimensity 8200; Operatiivmälu (RAM):24 GB; Aku mahutavus:8800

Ekraani suurus:6.7&apos;&apos;; Põhikaamera:108 MP; Telefoni sisseehitatud mälu:1 TB; Protsessor:MediaTek Dimensity 8200; Operatiivmälu (RAM):24 GB; Aku mahutavus:8800

6,7-tolline FHD+ AMOLED 120Hz ekraan; 108 MP põhikaamera; 8800 mAh aku, 45 W laadimine; Vee-, tolmu- ja löögikindel; Eemaldatavad kõrvaklapid/nutikell tagakaanel

The Mini-Tower Eclipse P200A is aimed at budget-conscious gamers and offers numerous features that are also interesting for PC enthusiasts. It is slightly larger than classic Mini-ITX cases, thus providing even more space for hardware, such as an ATX-format power supply. The fully meshed front ensures generous airflow while keeping dust out of the case's interior. Behind it, two 120mm or two 140mm fans can be mounted. Both the right and left closed side panels also feature mesh cutouts to further support airflow. A 120mm PWM fan is already installed at both the front and rear. The features of the PHANTEKS Eclipse P200A Performance at a glance: Elegant mini-tower for motherboards up to Mini-ITX form factor Stylish mesh front panel for good airflow Plenty of space for air or water cooling Two pre-installed fans at the front and rear Graphics cards up to 355 mm in length, vertical mounting possible CPU cooler clearance up to 165 mm in height 4x 2.5-inch slots & 4x 3.5-inch slots with optional brackets I/O panel with 2x USB 3.0 and 2x audio ports The PHANTEKS Eclipse P200A Performance: Sleek design with optimized airflow The PHANTEKS Eclipse P200A Performance follows the well-known design of the Eclipse series from PHANTEKS. The trapezoidal front consists entirely of a tightly meshed steel ventilation grille. The perforations, just one millimeter wide, ensure that the intake air enters the case dust-free yet unobstructed. Behind this, two 120mm or 140mm fans can be installed, with a 120mm PWM fan pre-installed. The front panel is easy to remove and clean. A 120mm PWM fan is already installed at the rear. Two more 120mm fans can be mounted on the right side, and a perforated cutout in the right side panel ensures sufficient airflow here as well. Two additional 120mm fans can be attached to the bottom. Accordingly, radiators can also be accommodated in the Eclipse P200A at the same time, with up to a 240mm radiator on the side and up to a 280mm one at the front. It should be noted, however, that a 240mm radiator must not be higher than 279mm and a front-mounted one not higher than 325mm. At the rear, a 120mm heat exchanger can also be installed. The case is equipped with a pull-out dust filter on the underside. Plenty of space for gaming hardware The interior of the Eclipse P200A Performance accommodates a Mini-ITX motherboard. The processor installed on it can be cooled with a CPU cooler up to 165 mm high. There is also plenty of room for graphics cards, which can be up to 355 mm long. With an optional riser card, a 3-slot or 65mm high GPU can also be installed vertically, omitting the rear fan. A bracket for vertical installation is included. There is also ample space for standard ATX-format power supplies, which are mounted at the top, with up to 205 mm provided. Two 2.5-inch drives can be mounted on the back of the motherboard tray. Additional brackets are included for two more 2.5-inch drives. These are attached next to the motherboard, forgoing fans or the side radiator. If you want to install 3.5-inch HDDs, you will need the optional HDD brackets from PHANTEKS, which are also mounted at the side. Up to two brackets for a total of four HDDs fit in the case. The I/O panel, featuring two USB 3.0 ports and almost ubiquitous audio jacks, is located at the bottom of the front. The power button is located on the top panel.

Piknikutekkide vaip 200 x 150 Promis KP200PZ

Store Your Cards in Style! Store up to 60 of your latest and greatest Pokémon cards in this mini portfolio. Each portfolio comes with a Pokémon TCG booster pack so you can start filling it up right away! Includes mini portfolio and one booster pack Booster pack contains 10 cards and either 1 Basic Energy or 1 VSTAR marker. Cards vary by pack. Packs vary by product. Mini portfolio measures about 3 ½ inches tall and 2 ½ inches wide, and it holds up to 60 cards Mini portfolio artwork features Great Tusk, Iron Treads, Slither Wing, and Iron Moth