<div><div>Mobile</div><div>Mobile module</div><div>4G LTE up to 150 DL/50 UL Mbps; 3G up to 21 DL/ 5.76 UL Mbps; 2G up to 236.8 DL/236.8 UL Mbps</div><div><br></div><div>eSIM</div><div>Consumer type eSIM, profile download and removal operations, up to 7 eSIM profiles; does not include data plans</div><div><br></div><div>3GPP Release</div><div>Release 9</div><div><br></div><div>SIM switch</div><div>2 SIM cards and 1 eSIM, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection</div><div><br></div><div>Status</div><div>Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID, SIM provider, operator, network type, cell ID, LAC, TAC, ARFCN, UARFCN, EARFCN</div><div><br></div><div>SMS</div><div>SMS status, SMS configuration, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP</div><div><br></div><div>USSD</div><div>Supports sending and reading Unstructured Supplementary Service Data messages</div><div><br></div><div>Block/Allow list</div><div>Operator block/allow list (by country or separate operators)</div><div><br></div><div>Multiple PDN</div><div>Possibility to use different PDNs for multiple network access and services</div><div><br></div><div>Band management</div><div>Band lock, Used band status display</div><div><br></div><div>SIM idle protection service</div><div>Provides the possibility to configure the router to periodically switch to the unused SIM card and establish a data connection in order to prevent the SIM card from being blocked</div><div><br></div><div>SIM PIN code management</div><div>SIM PIN code management enables setting, changing, or disabling the SIM card's PIN</div><div><br></div><div>APN</div><div>Auto APN</div><div><br></div><div>Bridge</div><div>Direct connection (bridge) between mobile ISP and device on LAN</div><div><br></div><div>Passthrough</div><div>Router assigns its mobile WAN IP address to another device on LAN</div><div><br></div><div>Framed routing</div><div>Framed routing: support an IP network behind 5G UE</div><div><br></div><div>Wireless</div><div>Wireless mode</div><div>802.11b/g/n/ac/ax (Wi-Fi 6) with data transmission rates up to 2402Mbps on 5GHz, 576Mbps on 2.4GHz (Dual Band, MU-MIMO)</div><div><br></div><div>Wi-Fi security</div><div>WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF)</div><div><br></div><div>SSID/ESSID</div><div>SSID stealth mode and access control based on MAC address</div><div><br></div><div>WiFi users</div><div>Up to 512 simultaneous connections</div><div><br></div><div>Wireless Connectivity Features</div><div>Wireless mesh (802.11s), fast roaming (802.11r), BSS transition management (802.11v), radio resource measurement (802.11k)</div><div><br></div><div>Wireless MAC filter</div><div>Allowlist, blocklist</div><div><br></div><div>Wireless QR code generator</div><div>Once scanned, a user will automatically enter your network without needing to input login information</div><div><br></div><div>TravelMate</div><div>Forward Wi-Fi hotspot landing page to a subsequent connected device</div><div><br></div><div>Ethernet</div><div>WAN</div><div>1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover</div><div><br></div><div>LAN</div><div>4 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover</div><div><br></div><div>Network</div><div>Routing</div><div>Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing</div><div><br></div><div>Network protocols</div><div>TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN</div><div><br></div><div>VoIP passthrough support</div><div>H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets</div><div><br></div><div>Connection monitoring</div><div>Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection</div><div><br></div><div>Firewall</div><div>Port forward, traffic rules, custom rules, TTL target customisation</div><div><br></div><div>Firewall status page</div><div>View all your Firewall statistics, rules, and rule counters</div><div><br></div><div>Port management</div><div>View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on</div><div><br></div><div>Network topology</div><div>Visual representation of your network, showing which devices are connected to which other devices</div><div><br></div><div>DHCP</div><div>Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards</div><div><br></div><div>QoS / Smart Queue Management (SQM)</div><div>Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e</div><div><br></div><div>DDNS</div><div>Supported >77 service providers, others can be configured manually</div><div><br></div><div>DNS over HTTPS</div><div>DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS</div><div><br></div><div>Network backup</div><div>Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover</div><div><br></div><div>Load balancing</div><div>Balance Internet traffic over multiple WAN connections</div><div><br></div><div>Hotspot</div><div>Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes</div><div><br></div><div>Hotspot 2.0</div><div>Hotspot 2.0 is a Wi-Fi standard that enables seamless, secure, and automatic connection to trusted wireless networks</div><div><br></div><div>SSHFS</div><div>Possibility to mount remote file system via SSH protocol</div><div><br></div><div>VRF support</div><div>Initial virtual routing and forwarding (VRF) support</div><div><br></div><div>Traffic Management</div><div>Real-time monitoring, wireless signal charts, traffic usage history</div><div><br></div><div>IGMP Proxy</div><div>Possibility to relay multicast membership messages between hosts and a router, enabling multicast traffic to flow across different network segments</div><div><br></div><div>Port Mirroring</div><div>Mirroring network traffic on Ethernet ports for monitoring and analysis</div><div><br></div><div>Security</div><div>802.1x</div><div>Port-based network access control client and server support</div><div><br></div><div>Authentication</div><div>Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator</div><div><br></div><div>Firewall</div><div>Preconfigured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64</div><div><br></div><div>Attack prevention</div><div>DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)</div><div><br></div><div>VLAN</div><div>Port and tag-based VLAN separation</div><div><br></div><div>Mobile quota control</div><div>Mobile data limit, customizable period, start time, warning limit, phone number</div><div><br></div><div>WEB filter</div><div>Block list for blocking out unwanted websites, allow list for specifying allowed sites only</div><div><br></div><div>Access control</div><div>Flexible access control of SSH, Web interface, CLI and Telnet</div><div><br></div><div>Certificate Manager</div><div>Certificate creation tool allows to create CA, server, client, let's encrypt, SCEP certificates</div><div><br></div><div>VPN</div><div>OpenVPN</div><div>Multiple clients and a server can run simultaneously, 27 encryption methods</div><div><br></div><div>OpenVPN Encryption</div><div>DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,</div><div><br></div><div>BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256</div><div><br></div><div>IPsec</div><div>XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)</div><div><br></div><div>GRE</div><div>GRE tunnel, GRE tunnel over IPsec support</div><div><br></div><div>PPTP, L2TP</div><div>Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support</div><div><br></div><div>Stunnel</div><div>Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code</div><div><br></div><div>DMVPN</div><div>Method of building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub support</div><div><br></div><div>SSTP</div><div>SSTP client instance support</div><div><br></div><div>ZeroTier</div><div>ZeroTier VPN client support</div><div><br></div><div>WireGuard</div><div>WireGuard VPN client and server support</div><div><br></div><div>Tinc</div><div>Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.</div><div><br></div><div>Tailscale</div><div>Tailscale offers speed, stability, and simplicity over traditional VPNs. Encrypted point-to-point connections using the open source WireGuard protocol</div><div><br></div><div>Netbird</div><div>Open-source VPN management platform built on top of WireGuard® making it easy to create secure private networks for your organization or home</div><div><br></div><div>EoIP</div><div>Ethernet over IP (EoIP) Tunneling is a MikroTik RouterOS protocol based on GRE RFC 1701 that creates an Ethernet tunnel between two routers on top of an IP connection</div><div><br></div><div>OpenConnect</div><div>Cross-platform multi-protocol SSL VPN client which supports a number of VPN protocols</div><div><br></div><div>BacNET</div><div>Supported modes</div><div>Router</div><div><br></div><div>Supported connection types</div><div>TCP</div><div><br></div><div>Configuration options</div><div>Support for multiple BACnet/IP interfaces, Network number assignment, Preconfigured BDT entries for BBMD (BACnet Broadcast Management Device)</div><div><br></div><div>OPC UA</div><div>Supported modes</div><div>Client, Server</div><div><br></div><div>Supported connection types</div><div>TCP</div><div><br></div><div>MQTT Gateway</div><div>Modbus MQTT Gateway</div><div>Allows sending commands and receiving data from MODBUS Server through MQTT broker</div><div><br></div><div>MODBUS</div><div>Supported modes</div><div>Server, Client</div><div><br></div><div>Supported connection types</div><div>TCP, USB</div><div><br></div><div>Custom registers</div><div>MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality</div><div><br></div><div>Supported data formats</div><div>8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII</div><div><br></div><div>Data to Server</div><div>Protocol</div><div>HTTP(S), MQTT, Azure MQTT</div><div><br></div><div>Data to server</div><div>Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting, allowing scripts to utilize the router's Data to server feature</div><div><br></div><div>DNP3</div><div>Supported modes</div><div>Station, Outstation</div><div><br></div><div>Supported connection</div><div>TCP</div><div><br></div><div>DLMS/COSEM</div><div>DLMS Support</div><div>DLMS - standard protocol for utility meter data exchange</div><div><br></div><div>Supported modes</div><div>Client</div><div><br></div><div>Supported connection types</div><div>TCP, USB</div><div><br></div><div>API</div><div>Teltonika Networks Web API (beta) support</div><div>Expand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com</div><div><br></div><div>Monitoring & Management</div><div>WEB UI</div><div>HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status</div><div><br></div><div>FOTA</div><div>Firmware update from server, automatic notification</div><div><br></div><div>SSH</div><div>SSH (v1, v2)</div><div><br></div><div>SMS</div><div>SMS status, SMS configuration</div><div><br></div><div>Call</div><div>Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/off</div><div><br></div><div>Email</div><div>Receive email message status alerts of various services</div><div><br></div><div>TR-069</div><div>OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem</div><div><br></div><div>MQTT</div><div>MQTT Broker, MQTT publisher</div><div><br></div><div>SNMP</div><div>SNMP (v1, v2, v3), SNMP Trap, Brute force protection</div><div><br></div><div>JSON-RPC</div><div>Management API over HTTP/HTTPS</div><div><br></div><div>RMS</div><div>Teltonika Remote Management System (RMS)</div><div><br></div><div>IoT Platforms</div><div>ThingWorx</div><div>Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type</div><div><br></div><div>Cumulocity - Cloud of Things</div><div>Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength. Has reboot and firmware upgrade actions</div><div><br></div><div>Azure IoT Hub</div><div>Can be configured with Data to Server to send all the available parameters to the cloud. Has Direct method support which allows to execute RutOS API calls on the IoT Hub. Also has Plug and Play integration with Device Provisioning Service that allows zero-touch device provisioning to IoT Hubs</div><div><br></div><div>AWS IoT Core</div><div>Utility to interact with the AWS cloud platform. Jobs Support: Call the device's API using AWS Jobs functionality</div><div><br></div><div>DOCKER</div><div>Docker Support</div><div>Supports running isolated applications and services using Docker containers, enabling custom software environments and microservices deployment directly on the device</div><div><br></div><div>System Characteristics</div><div>CPU</div><div>Mediatek, Dual-core, 1.3 GHz, ARM Cortex A53</div><div><br></div><div>RAM</div><div>1 GB, DDR4</div><div><br></div><div>FLASH storage</div><div>16 MB serial NOR flash, 8 GB eMMC Flash</div><div><br></div><div>Firmware/Configuration</div><div>WEB UI</div><div>Update FW from file, check FW on server, configuration profiles, configuration backup</div><div><br></div><div>FOTA</div><div>Update FW</div><div><br></div><div>RMS</div><div>Update FW/configuration for multiple devices at once</div><div><br></div><div>Keep settings</div><div>Update FW without losing current configuration</div><div><br></div><div>Factory settings reset</div><div>A full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer's configuration</div><div><br></div><div>FIRMWARE CUSTOMISATION</div><div>Operating system</div><div>RutOS (OpenWrt based Linux OS)</div><div><br></div><div>Supported languages</div><div>Busybox shell, Lua, C, C++</div><div><br></div><div>Development tools</div><div>SDK package with build environment provided</div><div><br></div><div>GPL customization</div><div>You can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients’ needs</div><div><br></div><div>Package Manager</div><div>The Package Manager is a service used to install additional software on the device</div><div><br></div><div>USB</div><div>Data rate</div><div>USB 2.0</div><div><br></div><div>Applications</div><div>Samba share, USB-to-serial</div><div><br></div><div>External devices</div><div>Possibility to connect external HDD, flash drive, additional modem, printer, USB-serial adapter</div><div><br></div><div>Storage formats</div><div>FAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4</div><div><br></div><div>Input/Output</div><div>Input</div><div>1 x Digital Input, 0 - 6 V detected as logic low, 8 - 50 V detected as logic high</div><div><br></div><div>Output</div><div>1 x Digital Output, Open collector output, max output 50 V, 300 mA</div><div><br></div><div>Events</div><div>Email, RMS, SMS</div><div><br></div><div>I/O juggler</div><div>Allows to set certain I/O conditions to initiate event</div><div><br></div><div>Power</div><div>Connector</div><div>4-pin industrial DC power socket</div><div><br></div><div>Input voltage range</div><div>9 - 50 VDC, reverse polarity protection, voltage surge/transient protection</div><div><br></div><div>PoE (passive)</div><div>Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 30 VDC</div><div><br></div><div>Power consumption</div><div>Idle: < 5.5 W, Max: < 13.5 W</div><div><br></div><div>Physical Interfaces</div><div>Ethernet</div><div>5 x RJ45 ports, 10/100/1000 Mbps</div><div><br></div><div>I/O’s</div><div>1 x Digital Input, 1 x Digital Output on 4-pin power connector</div><div><br></div><div>Status LEDs</div><div>4 x WAN type, 3 x Mobile connection type, 3 x Mobile connection strength, 10 x LAN status, 1 x Power, 2 x 2.4G and 5G Wi-Fi</div><div><br></div><div>SIM</div><div>2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders</div><div><br></div><div>Power</div><div>1 x 4-pin power connector</div><div><br></div><div>Antennas</div><div>2 x SMA for Mobile, 3 x RP-SMA for Wi-Fi</div><div><br></div><div>USB</div><div>1 x USB A port for external devices</div><div><br></div><div>Reset</div><div>Reboot/User default reset/Factory reset button</div><div><br></div><div>Other</div><div>1 x Grounding screw</div><div><br></div><div>Physical Specification</div><div>Casing material</div><div>Anodized aluminum housing and panels</div><div><br></div><div>Dimensions (W x H x D)</div><div>130.4 x 42.6 x 104 mm</div><div><br></div><div>Weight</div><div>480 g</div><div><br></div><div>Mounting options</div><div>DIN rail, wall mount, flat surface (all require additional kit)</div><div><br></div><div>Operating Environment</div><div>Operating temperature</div><div>-40 °C to 75 °C</div><div><br></div><div>Operating humidity</div><div>10% to 90% non-condensing</div><div><br></div><div>Ingress Protection Rating</div><div>IP30</div></div>
Tootekood: MB601VK-BGTIN: 4711132867282Disk drive docks and cases
Der ToughArmor MB601VK-B ist Icy Docks neue Generation von PCI-E basierenden Wechselrahmen die es möglich machen ultraschnelle 2,5" U.2 NVMe SSDs von Intel, Micron und Seagate in einem externen 3,5" Einbauschacht zu betreiben. Konstruiert mit dem neuesten U.2 Interface bietet der MB601VK-B eine Übertragungsrate von bis zu 32 GBit/s und unterstützt 2,5" U.2 NVMe SSDs sowie SAS und SATA Interface 2,5" SSDs und Festplatten. Die Leistung des MB601VK-B bietet die maximale Übertragungsgeschwindigkeit für die datenintensivsten Aufgaben wie Echtzeit-Datenbanktransfers und Refreshes, Bulk-Datenübertragungen aus mehreren Netzwerken, VMWares und Computern und die Bearbeitung von großen Medien-Assets aus den Bereichen Virtual Reality, Video, Musik und anderen Grafiken mit mehreren Workstations. Der Tray kann Festplatten und SSDs mit einer Bauhöhe von 7 bis 15 mm aufnehmen und bildet so einen Hot Swap Wechselrahmen für eine 2,5" U.2 NVMe SSD oder eine herkömmliche SAS/SATA Festplatte oder SSD. Während der Tray nicht in den Rahmen eingesetzt ist schützt eine Staubschutzklappe das Innere vor Verschmutzungen. Die Front des MB601VK-B beinhaltet eine Status-LED die die Betriebsbereitschaft sowie HDD-Zugriffe anzeigt. Die Active Power Technology (APT) erlaubt es der Status-LED nur dann aktiviert zu werden wenn auch ein Laufwerk eingesetzt ist. Für den physischen Schutz des Laufwerks wird die Eagle-Hook Verriegelung verwendet, die den Tray sicher in dem Rahmen fixiert. Zudem bietet das 2-Segment Schloss zusätzliche Sicherheit vor dem Diebstahl von Laufwerken um die sensiblen Daten zu schützen. Durch das Vollmetall-Design ist der ToughArmor ideal für industrielle, militärische und medizinische Geräte die ein Flammbarkeits-Rating benötigen, da Metall für gewöhnlich von sich aus die Flammbarkeitsanforderungen erfüllt.
VITURE XR Beast Glasses (size L)When technology reaches its absolute peak, something more than just an ordinary electronic device is born—a unique experience and an encounter with the future. VITURE XR Beast (Extended Reality) is the quintessence of advanced technology, modern design, and absolute freedom of immersion. This is VITURE’s most ambitious and groundbreaking XR model, designed for those who demand uncompromising quality—both at work and for entertainment. It features an impressive, large-screen virtual display with high resolution and brightness, delivering cinema-quality visuals. A built-in camera, support for 6DoF (Six Degrees of Freedom, a 3D motion tracking system that accounts for both position and orientation), adjustable lens tint, and the absence of a built-in battery ensure convenience and broad compatibility. An elegant metal design and eye protection round out the package—this is a complete, meticulously refined XR solution that redefines the concept of immersion.A screen that’s ahead of realityThe headset offers a 173-inch virtual screen suspended in front of you at the perfect distance of 3 meters, ensuring excellent visibility regardless of the activity you’re performing. The 1200p image with a 120 Hz refresh rate and brightness of up to 1250 nits delivers an experience comparable to 4K quality. This is the result of using the latest Sony panels and VisionPair™ technology, which allows you to adjust the displayed image to your preferences. The absence of glare, distortion, and blurred edges makes the screen literally “disappear,” allowing you to immerse yourself in the content like never before.Sound rich in detailAn incredible visual experience is just part of what the VITURE Beast has to offer. Sound co-created with HARMAN is 3DoF (Three Degrees of Freedom) spatial audio, which responds to head movement and lets you experience every scene, every note, and every detail with a new level of realism. Wirelessly, without interference, and with the precision you expect from top-tier audio systems.Premium ergonomics in a metal frameEvery element of the design has been refined with maximum comfort and long product life in mind. The combination of aluminum and magnesium in the frame guarantees not only low weight but also high damage resistance and an elegant, premium look. The Large model is designed for users with a wider interpupillary distance (IPD), offering an IPD range of 68.0 ± 6.0 mm, which translates to a precise fit and comfort during use.Technology that works for youVITURE Beast offers full support for 6DoF in the SpaceWalker app, allowing for precise tracking of movement in space and expanding the boundaries of interaction. The front RGB camera (Red, Green, Blue; the primary colors of light used to generate images in digital systems and cameras) enables basic spatial tracking, and thanks to dynamic dimming control, you can adjust the lens tint level (9+ levels) to your surroundings—from a bright room to full immersion in the XR world.Your screen, your style, your rulesThe VisionPair™ system allows you to adjust the screen size, position, and angle to your preferences. Choose from five color modes, control brightness and volume on a 9-step scale, and adjust the viewing axis—all from an intuitive interface. VITURE Beast are glasses that listen to you, not the other way around.The future in your handsUse the SpaceWalker app, available on Windows, macOS, Android, and iOS, to transform the way you consume content. Watch movies on multiple screens simultaneously, enable ultra-wide mode, and, thanks to artificial intelligence, activate real-time 2D (Two-Dimensional) to 3D (Three-Dimensional) conversion—the world’s first XR glasses to offer this capability. Technology that was once just a promise is now becoming a reality.Instant operation without charging or setupVITURE XR Beast works immediately after connecting to a compatible device via a USB-C port, which handles both data transfer and power. This keeps the design lightweight, allowing users to enjoy the glasses without interruptions for charging or complicated setup. This solution enables convenient connectivity with a wide range of mobile devices, computers, and consoles, eliminating the need for additional power sources and simplifying the entire user experience.Compatibility and Technical RequirementsThe VITURE XR Beast glasses are compatible with USB-C devices that support DP Alt Mode (DisplayPort output via USB-C), including laptops and select smartphones. However, for Apple devices, special attention should be paid to limitations—the iPhone 14 and iPhone Air models are not supported. To ensure proper operation, check your device’s specifications for support of DisplayPort over USB-C or Thunderbolt 4, and contact the manufacturer if in doubt. It is also important to note that not every device offering DP Alt Mode provides sufficient performance for 3D mode—the full experience requires a video output with a resolution of at least 4K, and some models, such as the Google Pixel 8 and 9 series, do not support 3D mode. Additionally, compatibility may be affected by regional differences and software updates, while the use of accessories such as the Neckband, Mobile Dock, HDMI XR adapter, or USB-C XR power adapter allows you to expand connectivity options and increase the range of supported devices.A+ Eye CareA+ Eye CareEnsure comfort and safety—SGS A+ Eye Care technology (certification granted by the international SGS – Société Générale de Surveillance – confirming the highest level of eye safety during prolonged use of displays) reduces eye strain even during hours of use, while axis adjustment and IPD customization allow you to fully tailor the device to your individual needs. VITURE Beast is the definition of modern technology, sophisticated design, and unlimited possibilities. Ready to discover a new dimension?IncludedXR glasses (size L)frame for prescription lenses3x interchangeable nose pads (sizes 1, 2, 3)USB-C to USB-C cable (1.2 m)glasses caseprotective covercleaning clothuser manual ManufacturerVITUREModelBeastDiopter adjustmentNoneAudio systemHARMAN AudioEFXSpeakersBuilt-in surround soundFundamental frequency250 Hz ± 50Sound settings9 levelsElectrochromic films/dynamic tint control9 levelsOptical transmittance0.5–40%Fogging<1%Decoloration time0.1 secondsWater detectionYesSuggested usage time3–4 hoursConnectionUSB-CResolution3840(H)x1200(V) & 1920(H)x1200(V) per eyeFOV (Field of View)58°Contrast Ratio≥100,000:1Colors108% sRGBIPDStandard size: 64.0±6.0mm; large size: 68.0±6.0mmVisual fusionYes2D/3D displayYesMaximum visible brightness1250 nitsBrightness control9 levelsDedicated appsSpaceWalker, Immersive 3DDimensions155 x 50.1 x 56.5 mm (folded), 191 × 85 × 85 mm (unfolded)Weight88 g (glasses), 300 g (glasses case) CompatibilityHandhelds (Portable consoles)ValveSteam Deck, Steam Deck OLEDASUSROG Ally X, ROG Ally Z1, ROG Ally Z1 ExtremeLenovoLegion Go, Legion Go SMSIClaw 8 AI+, Claw A1MAcerNitro Blaze 11, Nitro Blaze 8, Nitro Blaze 7GPDWin 4, Win 4 Pro, Win MiniAYANEOAYANEO 2, AYANEO GEEKOneXPlayerOneXFly, ONEXPLAYER 2, ONEXPLAYER 2 Pro, ONEXPLAYER Mini Pro, One-GX1, One-GX1 ProAYNOdin 2, Odin, Loki, Loki MaxSmartphonesSamsungS SeriesS25, S25+, S25 Ultra, S24, S24+, S24 Ultra, S23, S23+, S23 Ultra, S22, S22+, S22 Ultra, S21, S21+, S21 FE, S21 Ultra, S20, S20+, S20 FE, S20 Ultra, S10, S10e, S10+, S9, S9+, S8, S8+Z Series (Foldables)Galaxy Z Fold 5, Galaxy Z Fold 4, Galaxy Z Fold 3, Galaxy Z Fold 2, Galaxy Fold (original)Note SeriesNote 20, Note 20 Ultra, Note 10, Note 10+, Note 9, Note 8OthersGalaxy A90 5GApple (iPhone)USB-CiPhone 17, iPhone 17 Pro, iPhone 17 Pro Max, iPhone 16, iPhone 16 Plus, iPhone 16 Pro, iPhone 16 Pro Max, iPhone 15, iPhone 15 Plus, iPhone 15 Pro, iPhone 15 Pro MaxLightning (requires Mobile Dock)iPhone 14 and older modelsGooglePixel 9, Pixel 9 Pro, Pixel 9 XL, Pixel 8, Pixel 8 Pro, Pixel 8aHuaweiMate SeriesMate Xs 2, Mate 50, Mate 50 Pro, Mate 40, Mate 40 Pro, Mate Xs, Mate 30, Mate 30 Pro, Mate 30 RS, Mate 20 X, Mate 20, Mate 20 Pro, Mate 20XP SeriesP60, P60 Pro, P50, P50 Pro, P50 Pocket, P40, P40 Pro, P30, P30 Pro, P20, P20 ProOnePlusOnePlus 7, OnePlus 7 Pro, OnePlus 8, OnePlus 8 Pro, OnePlus 9, OnePlus 9r, OnePlus 9 Pro, OnePlus 10 Pro, OnePlus 12LGLG G7, LG G7+, LG G8, LG Q8, LG V20, LG V30, LG V30+, LG V35, LG V35+, LG V40, LG V50, LG V60SonyXperia 1, Xperia 5, Xperia 1 II, Xperia 5 II, Xperia PRO, Xperia 1 III, Xperia 5 III, Xperia PRO-I, Xperia 1 IV, Xperia 5 IV, Xperia 1 VHONORHonor Note 10, Honor View 20, Magic V, Magic Vs, Magic 6 Pro, Magic 5 Pro, Magic 5 Ultimate, Magic 4, Magic 4 Pro, Magic 4 Ultimate, Magic 3, Magic 3 Pro, Magic 3 Pro+ZTE / NubiaAxon 30 5G, Axon 30S, Axon 10 Pro, Axon 9 Pro, Nubia Red Magic 8 Pro, 8 Pro+, 8S Pro, 8S Pro+, 7, 7 Pro, 6S ProOther brandsMotorolaThinkPhone, Edge 40 Pro, Edge 30 Pro, Edge 30 Ultra, Edge 20 Pro, Edge+OPPOR17 PRO, Reno 10x Zoom, Reno 5G, Find X6 Pro, Find X5, Find X3, Find X3 Pro, Find X2, Find X2 Pro, Find N2VIVOX90 Pro+, X80 Pro, X70 Pro+, X Note, X Fold, X Fold+ASUSZenFone 3 Ultra, ZenFone AR, ROG Phone 7/7 Ultimate, ROG Phone 6/6 Pro, ROG Phone 6D/6D Ultimate, ROG Phone 5, 5s, 3, II, original ROG PhoneHTC10, Exodus 1, U Ultra, U11, U11+, U12+, U19eBlack SharkBlack Shark 5 Pro, 4, 3, 2SharpAquos R7, R6, R5G, zero5G basic, Leica Leitz Phone 1, Leica Leitz Phone 2OthersRazer Phone, Razer Phone 2, Essential Phone, Microsoft Lumia 950/950 XL, Purism Librem 5, PinePhone, HP Elite x3, Smartisan R2/R1/Nut Pro 3, Lenovo Legion Y90/Duel 2/2 Pro/Duel Phone, BlackBerry Key2, BQ Aquaris X2, Acer Liquid Jade Primo.Home Consoles, PCs, and Others (Require connection via Mobile Dock (HDMI) or Neckband (Streaming))NintendoSwitch, Switch OLED, Switch 2SonyPlayStation 5, PlayStation 4MicrosoftXbox Series X, Xbox Series S, Xbox OneComputersPC, Laptop (via HDMI or USB-C DP Alt Mode)StreamingTV Sticks (e.g., Fire TV, Chromecast), HDD/SSD drives, and USB flash drives (via USB-C in the Neckband).
Tootekood: MB742SP-BGTIN: 4713227445023Disk drive docks and cases
The Icy Dock ExpressCage MB742SP-B is a compact solution for installing two 2.5” SSDs or HDDs in a 3.5” drive bay. Due to the growing popularity of SFF (Small-Form-Factor) systems thanks to space savings and lower power consumption, a suitable storage solution is also needed in an equally compact design that still provides protection for your data. The ExpressTray MB742TP-B supports tool-less drive installation and has been specifically improved. Drives are held more securely in the tray by the side grips, and the carry handle made from a single piece is even more robust. The metal housing features ventilation openings all around to keep the drives cool at all times, including during intensive use.TypeHot-swap trayColorblackEAN4713227445023Manufacturer No.MB742SP-BApplicationInstallation in an external 3.5" bayUseDrive frameSuitable fortwo 2.5" SATA or SAS Single Channel HDD/SSD up to 9.5 mm heightMaterialMetalInstallable drives2x 2.5 inch internalRequired drive bays1x 3.5 inch externalExternal connections2x SATAInternal connectionsSAS, SATADimensionsWidth: 101.6 mm x Height: 25.4 mm x Depth/Length: 136.3 mmWeight332 grams
Tootekood: MB971SP-BGTIN: 4711132868661Disk drive docks and cases
The Icy Dock MB971SP-B "DuoSwap" 2.5" / 3.5" hot-swap drive frame allows the use of one 2.5" and one 3.5" HDD or SSD in a 5.25" drive bay. When installing a single 2.5" HDD, the MB971SP-B enables a height of up to 12.5 mm, and when simultaneously operating a 3.5" HDD, it allows the 2.5" HDD to have a height of up to 9.5 mm. The MB971SP-B enables fast and easy drive installation without tools. In addition, it provides an individual SATA 6Gbps connection for each hard drive or SSD. Features include, among others, an anti-vibration design for the 3.5" bay, an "Eagle-Hook" mechanism for additional physical security for 3.5" drives, and individual LEDs for each bay. Easily accessible on/off switches help save power and extend the service life of the drives.TypeHot-swap drive frameColorblackEAN4711132868661Manufacturer No.MB971SP-BIntended useInstallation in a 5.25" bay in a PC caseUseDrive frameSuitable forone 2.5" and one 3.5" SATA driveInstallable drives1x 3.5 inch internal, 2x 2.5 inch internalRequired drive bays1x 5.25 inch internalExternal connections2x SATAInternal connectionsSATAFurther informationtwo on/off switches, two eject buttons, two LEDs, supports SATA 600, two SATA connectorsWeight712 grams
Tootekood: MB411SPO-2BGTIN: 4711132867350Disk drive docks and cases
Mit dem ToughArmor MB411SPO-2B stellt Icy Dock einen, komplett aus Metall gefertigten, 2,5” SATA / SAS Festplatten- / SSD-Wechselrahmen für den 9,5mm hohen optischen Ultra Slimline Laufwerksschacht (Ultra-Slim ODD-Schacht) vor. Dieser findet sich hauptsächlich in neueren Laptops, Desktop-PCs und Workstations. Der MB411SPO-2B wird komplett aus Metall hergestellt und stellt somit eine maximale Lebensdauer sicher und widersteht selbst den widrigsten Umgebungsbedingungen. Der EZ Slide Slim Tray unterstützt 2,5" SATA Festplatten und SSDs jeder Kapazität mit Bauhöhen von 5 bis 7mm und ermöglicht schnelle Wechsel via Hot Swap für eine einfache Wartung. Darüber hinaus unterstützt der MB411SPO-2B Übertragungsraten von bis zu 6 GBit/s, während der interne SATA-Anschluss bis zu 10.000 Laufwerkswechsel erlaubt. Auf Grund des soliden Designs und der Hot Swap Funktion, ist der MB411SPO-2B eine perfekte Speicherlösung für alle Anwender, die ein hochwertiges, robustes Gehäuse mit entnehmbarem Tray benötigen - sei es für den Transport, die Archivierung oder den Schutz von sensiblen Daten. Zu diesen Anwendern gehören unter anderem Behörden und öffentliche Einrichtungen, digitale Kinos sowie kleine und mittelständische Unternehmen.
Tootekood: MB741TP-BGTIN: 4713227445474Disk drive docks and cases
The MB741TP-B (black) drive tray (tray) from Icy Dock is an additional tray and suitable for the Icy Dock ExpressCage MB741SP-B 1x 2.5" SAS/SATA HDD/SSD hot-swap drive cage.TypeDrive traysColorblackEAN4713227445474Manufacturer No.MB741TP-BIntended usefor ICY DOCK ExpressCage MB741SP-BSuitable forCompatible drives: 2.5" SSD/HDD (up to 15 mm) or M.2 SATA to 2.5" adapterMaterialPlasticDrives to be installed1x 2.5-inch internalInternal connectionsM.2, SATADimensionsWidth: 85.5 mm x Height: 23.3 mm x Depth/Length: 119.5 mmWeight32 grams
Tootekood: 61098GTIN: 4250078174356Arvutid ja komponendid > IT tarvikud
The IB-180MS-C31 DockingStation supports both M.2 NVMe/SATA SSDs and 3.5-inch/2.5-inch SATA III drives, providing flexibility for various storage needs. Easily switch between SSD and HDD with a simple press of the button on the front. Lightning-fast data transfer rates of up to 10 Gbit/s via the USB 3.2 Gen2x1 Type-C interface. Equipped with a USB Type-C to Type-C/Type A combination cable, this adapter offers double connection options. This increases versatility when connecting to different devices. Docking station type Color black EAN 4250078174356 Manufacturer no. 61098 Compatible with 2.5"/3.5" SATA hard drive and M.2 NVMe Devices that can be used at the same time 2 Hard drive slots Ports 1x M.2, 1x SATA, 1x USB-C 3.2 Gen 2 (10 Gbit/s) Power supply Mains and USB operation Further information Supports M.2 socket M-Key, M.2 card size 22x 42/60/80 mm, M.2 connector, PCIe (NVMe) Accessories available Dimensions Width: 113mm x Height: 15mm x Depth/Length: 55mm Weight 45 grams
