Your computer will feel like a fish out of water here. You spend a lot of money on the processor, motherboard, graphics card and RAM and put it all in a computer case. Sometimes you look at your current case that hides all these components and wish you could see all the technological achievements that generate so much FPS in games. The Volcano Space housing has a special design in which the front and side panels are made of tempered glass. Thanks to this, its structure resembles an aquarium in which all installed components can be seen from virtually any angle. This is a case for those who love displaying their computer! What's more, in this unique design you can install a motherboard with reversed connectors, and the computer assembly will be made more pleasant by ergonomic solutions such as the assembly and disassembly of panels with snaps. To personalize your personal computer as much as possible, we have made it possible to move the I/O panel from the side to the front, and we have also left a lot of space for optional water cooling and long graphics cards. Your computer will feel like a fish out of water here. Modern solutions for modern motherboards. Installing motherboards with reversed connectors. The housing is designed for mounting boards with non-standard socket locations on the laminate, i.e. where the connectors have been moved from the front to the reverse of the laminate. However, nothing stops you from installing well-known and popular models of motherboards. The choice is yours. The housing allows the installation of classically constructed ATX boards, so you are not limited by the chassis design. The highest order Fully tested compatibility with the MSI Project Zero motherboard and ASUS B760M-BTF WiFi D4 confirms the modernity of the solutions for all users who value order in their computer. Leading out the connectors to the reverse of the motherboard allows you to hide the cables and fully expose the gaming components. Volcano Space sets standards of aesthetics and order at the highest level. 4 X 140 ARGB at the start Keeping components running cool is paramount. Thanks to this, they work more efficiently and their service life increases. Pre-installed ARG fans (3 x 140 mm on the side panel and 1 x 140 mm on the back) ensure good airflow, effectively cooling the graphics card and processor. However, if you want to have even greater configuration options, you can install three additional 120 mm or 2 x 140 mm fans on the top panel. Moreover, at the bottom of the case, right next to the front panel, you can install another 120 mm or 140 mm fan. Because, as you know, the temple doesn't give you a headache! Without screws. Easy and pleasant, everything with snaps. The times when you had to unscrew panels are long gone. In the Volcano Space housing, we offer pleasant and simple solutions so that you can build your dream computer with a smile. All panels are mounted with a latch and you do not need any tools to remove the panel and conveniently install the components. Need to add RAM sticks? Blow out the dust from the interior? You can remove the panels with a smooth movement of your hand without having to unscrew them. Do it your way The panel with USB/Audio inputs can be configured according to your wishes and can be installed on the side or front of the housing. Thanks to this solution, you have even better options for arranging your computer. On the panel you will find 2 USB3.0 connectors and one USB-C connector. The microphone and headphone inputs are located in a combo socket. Water cooling The housing is suitable for water cooling installation. At the top of the case there is space for radiators up to 360 mm. The same size cooler will also fit in place of the factory-installed fans on the motherboard mounting wall. At the back, you will install a 140 mm radiator. The introduced solutions are intended to create a real gaming machine for every game. And all this in an interesting, glass structure. Dust filter There is a dust filter placed under the power supply. You can easily remove and install the filter, which will keep your computer clean and at the same time increase the efficiency and safety of the power supply. A place for your favorite games There will be plenty of space for your favorite games. The housing allows you to install one 2.5" drive on the motherboard tray. Additionally, you can install one 3.5" drive in the power supply tunnel and at least two 2.5" drives (vertically). Due to its glass construction, the case mainly exposes the front of the motherboard, on which manufacturers are increasingly placing several M.2 connectors for NVME drives. The beauty of ARGB LED This type of housing demands LEDRGB fans. And that's what you get as standard - four of them, all 140 mm ARGB. The glazed front and side panel displays the installed components in the best possible way. You can highlight your components with a selected color or set the backlight to shimmering rainbow colors. This is a case for those who like to display the inside of their personal computer Rubber grommets and Velcro cable organizers As befits the construction of the housing for gaming units, there are rubber grommets inside at the level of the power supply tunnel. Their purpose is to protect the cables against damage, especially the graphics card power cable. There are also Velcro cable organizers on the back of the motherboard tray to organize the inside of the computer in the best possible way. A soft cloth, a screwdriver and a GPU support We took care of all the details, we know that when assembling a computer you just want to have everything you need at hand. Opening for this box with housing, inside you will find a soft cloth with which you can clean the glass panels. Additionally, the set includes a screwdriver and a support for the GPU. And all housing screws are packed in a dedicated box. Extra cooling? Here you go! There is, of course, mounting space for additional fans on the top panel. If you so wish, you can easily install additional fans in a 3 x 120 mm or 2 x 140 mm configuration. But that's not all, because at the height of the PSU tunnel there is still room for one additional 120 mm or 140 mm fan. All this to maintain the lowest possible temperatures and thus ensure comfort during many hours of intense and hot computer sessions. Ventilation Small ventilation holes in the top panel and in the service panel of the housing ensure good air circulation. They ensure optimal air flow while providing protection against dust. Removable caps and vertical GPU mounting All PCI/PCIe expansion card caps are removable. Players will also appreciate the possibility of vertically mounting the graphics card, because the metal frame in which the caps are placed can be unscrewed.
Tootekood: NKZ-1953GTIN: 5901969435429Disk drive docks and cases
Access to data in any situationNatec Rhino M.2 NVMe is a rugged M.2 NVMe/PCIe SSD enclosure that gives you access to the data stored on your drive and protects it from damage. Solid and simple construction are not the only advantages of Natec Rhino. Support for UASP and TRIM technology enhances drive performance, and Plug&Play architecture allows you to access data as soon as it's plugged in. Turn your M.2 NVMe/PCIe media into an external driveWant to use data stored on your M.2 NMVe/PCIe SSD? With Natec Rhino M.2 NVMe this becomes possible. This compact form factor allows you to use M-key media sizes of 2230, 2242, 2260 and 2280 with a maximum capacity of up to 2TB. Lightning-fast data transferWith a USB-C 3.2 Gen 2 x 1 interface, you don't have to worry about data transfer speeds. It can reach up to 10 Gbps. High performance is also guaranteed by the TRIM command and the UASP protocol, thanks to which a USB device can execute several commands at the same time without abandoning any of them. Robust and compactAre you concerned about mechanical damage caused by moving the drive? With Natec Rhino M.2 NVMe you will keep your equipment secure. This will be ensured by a durable, full aluminium housing and an intuitive media mounting system that makes it all fully stable inside. Just plug it inWith Natec Rhino M.2 NVMe, your data is always ready to go. It does not require installation of any drivers. All you need to do is put the media on it and connect it to your computer. Simple. Additional accessories includedThe set includes not only two cables (USB-C USB-C, USB-A USB-C), but also a screwdriver and a mounting screw, thanks to which you can quickly mount your media. You don't need anything else to be able to fully exploit the potential of Rhino M.2 NVMe.
Tootekood: PV810UPNGMGTIN: 4711378427400Disk drive docks and cases
With the TXD Portable SSD Enclosure, Patriot Memory is proud to offer an SSD enclosure truly built for the future. Featuring a PCIe Gen3 SSD interface optimized for M.2 2230/2242/2260/2280 sized drives from 120GB to 8TB, the TXD SSD Enclosure is built for blazing fast read and write speeds of up to 1000MB/s. It also features a Gen2 USB 3.2 bridge that delivers 10GB/s transfer speeds.Along with its superior performance, the TXD also offers breathtaking aesthetics and a dual-connector USB-C to C and USB-C to A cable. Users can now have the right combination of performance, compatibility, and looks to fit in with their builds.Built with best-in-class components and materials, the TXD also comes with a 3-year limited warranty for users’ total peace of mindFEATURES:Host side: USB 3.2 GEN2 (10Gbps) controllerDevice side: USB3.2 Type-C interfaceDual- connectors USB-C to C and USB-C to A cable includedPCIe Gen3 x 4, NVMe 1.3 Form Factor: M.2 2230/2242/2260/2280 SEQ performance up to R:1000MB/s, W:/1000MB/s Supports Capacity from 120GB up to 8TB 100% Aluminum Alloy Shell Built in Heatsink & Thermal Pad, 30%~40% Cooling Down.Support Hot Swap and Reversible Swap Tool-free to disassemble and install, practical push-and - pull deviceCompatible with USB3.0/USB2.0 interface Compatible with Windows/ Mac OS/ Linux/ Android Platform
<div class="col-lg-12 col-ld-6 col-md-6 col-sm-5"> <h1>for drive M.2 SSD | SATA | NVMe | USB-C | 2TB</h1> <p class="code">Product code: 52271</p> </div> <div class="col-lg-12 col-ld-6 col-md-6 col-sm-7"> <p class="preamble">Portable aluminium enclosure for an M.2 drive, allows you to connect an SSD to the device of your choice via an ultra-fast USB-C connector. The enclosure supports drives of different lengths with M key and M+B key, so you don't have to worry about compatibility. <br /> - Plug&play function<br /> - Aluminium casing<br /> - Maximum drive capacity 2TB<br /> - Maximum transfer rate: 10Gbps<br /> - UASP support</p> </div>
Savio AK-84 storage drive enclosure SSD enclosure Black M.2
Tootekood: AK-84GTIN: 5901986049876Disk drive docks and cases
External M.2 SSD NVMe & NGFF enclosure AK-84 SAVIO AK-84 External Drive Enclosure is a modern solution that allows you to easily transform an internal M.2 SSD NVMe or NGFF drive into a fast and portable storage device. With USB 3.1 Gen 2 support and transfer speeds of up to 10 Gb/s, your files will always be instantly accessiblewhether youre working, gaming, or backing up important data. Reliable Speed and Compatibility SAVIO AK-84 supports both M.2 PCI-E (NVMe) and SATA (NGFF) drives in popular sizes: 2230, 2242, 2260, and 2280. It handles capacities of up to 4 TB, allowing you to transfer or store even the largest photo libraries, movies, or system backups. The enclosure works seamlessly with Windows (XP/7/8/10/11) and macOS, and thanks to Plug & Play, it requires no drivers or complicated setup. Solid and Compact Design The elegant black enclosure features a lightweight yet durable build (only 44 g). Its slim dimensions (104.5 x 39.5 x 12 mm) make it easy to carry in a bag or backpack, making it an ideal solution for office work, business trips, and everyday use. Easy Installation and Safety Installing a drive inside the enclosure is quick and intuitivesimply insert the M.2 drive at an angle, secure it with the latch, and screw on the cover. With the included mounting kit and USB-A to USB-C 3.1 Gen 2 cable, the device is ready to use straight out of the box. Additionally, the materials used ensure safe operationthe enclosure is resistant to mechanical damage and overheating, keeping your data fully protected. Package Contents SAVIO AK-84 Enclosure for M.2 SSD NVMe & NGFF USB-A to USB-C 3.1 Gen 2 cable Mounting kit User manual Why Choose SAVIO AK-84? Ultra-fast data transfer up to 10 Gb/s Support for NVMe and SATA drives up to 4 TB Compact, lightweight, and elegant design Full compatibility with Windows and macOS Quick and easy Plug & Play installation SAVIO AK-84 is the perfect choice for anyone who wants to fully unlock the potential of their M.2 SSD drives and enjoy top-level mobility, speed, and security. Specification Interface: USB 3.1 Gen 2 Maximum bandwidth: 10 Gbps Maximum capacity of the installed disk: 4 TB Obsługiwany rozmiar dysków: M.2 2230, M.2 2242 M.2 2260 M.2 2280 Obsługiwany typ dysków: M.2 (PCI-E, SATA) Compatibility: Windows XP / Vista / 7 / 8 / 10 / 11 / macOS
<b>Many ports and high performance in nano format</b><br />The NC40U series comes with powerful and efficient 12th generation Intel Core processors, codenamed 'Alder Lake-U'. Despite the nano format with only 850 ml volume, it offers enormous connection variety and expansion options. Thus, up to three UHD displays (4K/60Hz) and up to seven USB 3.2 devices can be connected, and two NVMe/SSD cards in M.2-2280 format as well as one 2. 5 inch hard drive (up to 15 mm thickness) can be installed. The NC40U series is ideal for Digital Signage, POS, control, office or even multimedia.<br /><br />
