The DGS-1210 series Smart switch features D-Link Green 3.0 technology. The series offers a high level of energy saving and efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv6 management and configurations ensures your network remains protected after the upgrade from IPv4 to IPv6. By offering multiple management options, the Smart switch allows quick deployment, infrastructure expansion, and seamless function upgrades. Built for small and medium-sized businesses, the DGS-1210 series Smart switch provides functionality, security, and manageability for a fraction of the standard cost of ownership. The DGS-1210-08P is a 8-port Smart PoE switch that provides 8 PoE-enabled ports that can supply power of up to 15.4 W each.
Metro Ethernet Switches DGS-1210/ME SeriesFlexible Hardware Design Available in multiple configurations: Combinations of 1000BASE-T and SFP Designed for standard 1U rack-mounting Rear panel RPS connector for an additional external power supply Layer 2 Features 16K MAC address table IEEE 802.1D STP, 802.1w RSTP, and 802.1s MSTP Loopback detection Supports IEEE 802.3ad Link Aggregation Port-based Q-in-Q VLAN Trunking Security and Authentication Port security SSH/SSL IP-MAC-Port Binding (IMPB) Access Control List (ACL) and IEEE 802.1X Guest VLAN Reliability and Maintenance Surge protection on all Gigabit Ethernet ports ITU-T G.8032 ERPS sub-50 ms protection and recovery Dying Gasp for quick trouble shooting during power failures or system shut downs The DGS-1210/ME Series Metro Ethernet Switches are a range of switches designed for Metro Ethernet applications. They feature a variety of port configurations, including 10/100/1000BASE-T RJ-45 ports and 1G SFP ports for increased network bandwidth. Surge protection, advanced Layer 2 functions, and a suite of security and management tools make the DGS-1210/ME Series Metro Ethernet Switches ideal for Metro Ethernet applications.Efficient and ResilientFor mission critical environments, the DGS-1210/ME Series Metro Ethernet Switches support IEEE 802.1D 2004 edition, 802.1w, and 802.1s Spanning Tree Protocols (STP). The Spanning Tree Protocol allows the switches to participate in Spanning Tree topology, providing an alternative Layer 2 path in the event of a network failover. The switches also support IEEE 802.3ad link aggregation, which enables multiple ports to be grouped to form a single virtual port, increasing bandwidth and redundancy for higher availability.This series furthermore features IEEE 802.1p Quality of Service (QoS), allowing for real-time traffic classification into Weighted Round Robin (WRR) and strict priority levels mapped to 8 queues. Advanced traffic classification parameters allow the network to be tuned for flexible configurations for specific multimedia applications such as VoIP or IPTV.Security & AuthenticationThe DGS-1210/ME Series supports IEEE 802.1X port-based/host-based access control, guest VLAN, and RADIUS/TACACS+ authentication for strict access control to the network. The IP- MAC-Port Binding (IMPB) feature allows administrators to associate a source IP address with a designated MAC address and also offers the flexibility to define the port number to enhance user access control.The built-in D-Link Safeguard Engine protects the CPU from broadcast, multicast, and unicast flooding by automatically trapping packets and logging events in these situations. In addition, the Access Control List (ACL) feature enhances network security and switch performance.Management CapabilitiesA user-friendly web interface gives administrators access to advanced management features such as DHCP auto-configuration. This enables switches to load their configuration from a TFTP server once they have been assigned an IP address, allowing central management of device configurations. The switches support Link Layer Discovery Protocol (LLDP), which advertises the devices capabilities and identity to the local network, allowing administrators to better manage their network topology. Each portalso supports cable diagnostics, which can be used to troubleshoot cable length and functionality problems remotely, resulting in lower management overheads. Traffic & Bandwidth ControlIntegrated bandwidth control allows network administrators to define the throughput levels for ingress and egress bandwidth. It provides a minimum granularity of 64 Kbps for ingress port and flow-based bandwidth control, and a minimum granularity of 64 Kbps for egress queue bandwidth. The DGS-1210/ME Series also supports traffic control, which optimizes performance by dropping packets when exceeding a set threshold, while port mirroring helps administrators facilitate traffic diagnostics and track network performance. The DGS-1210/ME Series also provides IGMP snooping with IGMP authentication to prune multicast traffic and to optimize available bandwidth. Multicast ApplicationsThe DGS-1210/ME Series features a full set of L2 multicast functions, including IGMP snooping, IGMP filtering, fast leave, and multicast traffic configuration for specific ports. With L2 multicast support, the DGS-1210/ME Series is ready and capable of handling growing IPTV applications. Host-based IGMP/MLD snooping allows for multiple multicast subscribers per physical interface, and ISM VLAN sends multicast streams in a multicast VLAN, saving bandwidth on the backbone. Additionally, ISM VLAN profiles allow users to bind or replace the predefined multicast registration information to subscriber ports quickly and easily.
Metro Ethernet Switches DGS-1210/ME SeriesFlexible Hardware Design Available in multiple configurations: Combinations of 1000BASE-T and SFP Designed for standard 1U rack-mounting Rear panel RPS connector for an additional external power supply Layer 2 Features 16K MAC address table IEEE 802.1D STP, 802.1w RSTP, and 802.1s MSTP Loopback detection Supports IEEE 802.3ad Link Aggregation Port-based Q-in-Q VLAN Trunking Security and Authentication Port security SSH/SSL IP-MAC-Port Binding (IMPB) Access Control List (ACL) and IEEE 802.1X Guest VLAN Reliability and Maintenance Surge protection on all Gigabit Ethernet ports ITU-T G.8032 ERPS sub-50 ms protection and recovery Dying Gasp for quick trouble shooting during power failures or system shut downs The DGS-1210/ME Series Metro Ethernet Switches are a range of switches designed for Metro Ethernet applications. They feature a variety of port configurations, including 10/100/1000BASE-T RJ-45 ports and 1G SFP ports for increased network bandwidth. Surge protection, advanced Layer 2 functions, and a suite of security and management tools make the DGS-1210/ME Series Metro Ethernet Switches ideal for Metro Ethernet applications.Efficient and ResilientFor mission critical environments, the DGS-1210/ME Series Metro Ethernet Switches support IEEE 802.1D 2004 edition, 802.1w, and 802.1s Spanning Tree Protocols (STP). The Spanning Tree Protocol allows the switches to participate in Spanning Tree topology, providing an alternative Layer 2 path in the event of a network failover. The switches also support IEEE 802.3ad link aggregation, which enables multiple ports to be grouped to form a single virtual port, increasing bandwidth and redundancy for higher availability.This series furthermore features IEEE 802.1p Quality of Service (QoS), allowing for real-time traffic classification into Weighted Round Robin (WRR) and strict priority levels mapped to 8 queues. Advanced traffic classification parameters allow the network to be tuned for flexible configurations for specific multimedia applications such as VoIP or IPTV.Security & AuthenticationThe DGS-1210/ME Series supports IEEE 802.1X port-based/host-based access control, guest VLAN, and RADIUS/TACACS+ authentication for strict access control to the network. The IP- MAC-Port Binding (IMPB) feature allows administrators to associate a source IP address with a designated MAC address and also offers the flexibility to define the port number to enhance user access control.The built-in D-Link Safeguard Engine protects the CPU from broadcast, multicast, and unicast flooding by automatically trapping packets and logging events in these situations. In addition, the Access Control List (ACL) feature enhances network security and switch performance.Management CapabilitiesA user-friendly web interface gives administrators access to advanced management features such as DHCP auto-configuration. This enables switches to load their configuration from a TFTP server once they have been assigned an IP address, allowing central management of device configurations. The switches support Link Layer Discovery Protocol (LLDP), which advertises the devices capabilities and identity to the local network, allowing administrators to better manage their network topology. Each portalso supports cable diagnostics, which can be used to troubleshoot cable length and functionality problems remotely, resulting in lower management overheads. Traffic & Bandwidth ControlIntegrated bandwidth control allows network administrators to define the throughput levels for ingress and egress bandwidth. It provides a minimum granularity of 64 Kbps for ingress port and flow-based bandwidth control, and a minimum granularity of 64 Kbps for egress queue bandwidth. The DGS-1210/ME Series also supports traffic control, which optimizes performance by dropping packets when exceeding a set threshold, while port mirroring helps administrators facilitate traffic diagnostics and track network performance. The DGS-1210/ME Series also provides IGMP snooping with IGMP authentication to prune multicast traffic and to optimize available bandwidth. Multicast ApplicationsThe DGS-1210/ME Series features a full set of L2 multicast functions, including IGMP snooping, IGMP filtering, fast leave, and multicast traffic configuration for specific ports. With L2 multicast support, the DGS-1210/ME Series is ready and capable of handling growing IPTV applications. Host-based IGMP/MLD snooping allows for multiple multicast subscribers per physical interface, and ISM VLAN sends multicast streams in a multicast VLAN, saving bandwidth on the backbone. Additionally, ISM VLAN profiles allow users to bind or replace the predefined multicast registration information to subscriber ports quickly and easily.
Metro Ethernet Switches DGS-1210/ME SeriesFlexible Hardware Design Available in multiple configurations: Combinations of 1000BASE-T and SFP Designed for standard 1U rack-mounting Rear panel RPS connector for an additional external power supply Layer 2 Features 16K MAC address table IEEE 802.1D STP, 802.1w RSTP, and 802.1s MSTP Loopback detection Supports IEEE 802.3ad Link Aggregation Port-based Q-in-Q VLAN Trunking Security and Authentication Port security SSH/SSL IP-MAC-Port Binding (IMPB) Access Control List (ACL) and IEEE 802.1X Guest VLAN Reliability and Maintenance Surge protection on all Gigabit Ethernet ports ITU-T G.8032 ERPS sub-50 ms protection and recovery Dying Gasp for quick trouble shooting during power failures or system shut downs The DGS-1210/ME Series Metro Ethernet Switches are a range of switches designed for Metro Ethernet applications. They feature a variety of port configurations, including 10/100/1000BASE-T RJ-45 ports and 1G SFP ports for increased network bandwidth. Surge protection, advanced Layer 2 functions, and a suite of security and management tools make the DGS-1210/ME Series Metro Ethernet Switches ideal for Metro Ethernet applications.Efficient and ResilientFor mission critical environments, the DGS-1210/ME Series Metro Ethernet Switches support IEEE 802.1D 2004 edition, 802.1w, and 802.1s Spanning Tree Protocols (STP). The Spanning Tree Protocol allows the switches to participate in Spanning Tree topology, providing an alternative Layer 2 path in the event of a network failover. The switches also support IEEE 802.3ad link aggregation, which enables multiple ports to be grouped to form a single virtual port, increasing bandwidth and redundancy for higher availability.This series furthermore features IEEE 802.1p Quality of Service (QoS), allowing for real-time traffic classification into Weighted Round Robin (WRR) and strict priority levels mapped to 8 queues. Advanced traffic classification parameters allow the network to be tuned for flexible configurations for specific multimedia applications such as VoIP or IPTV.Security & AuthenticationThe DGS-1210/ME Series supports IEEE 802.1X port-based/host-based access control, guest VLAN, and RADIUS/TACACS+ authentication for strict access control to the network. The IP- MAC-Port Binding (IMPB) feature allows administrators to associate a source IP address with a designated MAC address and also offers the flexibility to define the port number to enhance user access control.The built-in D-Link Safeguard Engine protects the CPU from broadcast, multicast, and unicast flooding by automatically trapping packets and logging events in these situations. In addition, the Access Control List (ACL) feature enhances network security and switch performance.Management CapabilitiesA user-friendly web interface gives administrators access to advanced management features such as DHCP auto-configuration. This enables switches to load their configuration from a TFTP server once they have been assigned an IP address, allowing central management of device configurations. The switches support Link Layer Discovery Protocol (LLDP), which advertises the devices capabilities and identity to the local network, allowing administrators to better manage their network topology. Each portalso supports cable diagnostics, which can be used to troubleshoot cable length and functionality problems remotely, resulting in lower management overheads. Traffic & Bandwidth ControlIntegrated bandwidth control allows network administrators to define the throughput levels for ingress and egress bandwidth. It provides a minimum granularity of 64 Kbps for ingress port and flow-based bandwidth control, and a minimum granularity of 64 Kbps for egress queue bandwidth. The DGS-1210/ME Series also supports traffic control, which optimizes performance by dropping packets when exceeding a set threshold, while port mirroring helps administrators facilitate traffic diagnostics and track network performance. The DGS-1210/ME Series also provides IGMP snooping with IGMP authentication to prune multicast traffic and to optimize available bandwidth. Multicast ApplicationsThe DGS-1210/ME Series features a full set of L2 multicast functions, including IGMP snooping, IGMP filtering, fast leave, and multicast traffic configuration for specific ports. With L2 multicast support, the DGS-1210/ME Series is ready and capable of handling growing IPTV applications. Host-based IGMP/MLD snooping allows for multiple multicast subscribers per physical interface, and ISM VLAN sends multicast streams in a multicast VLAN, saving bandwidth on the backbone. Additionally, ISM VLAN profiles allow users to bind or replace the predefined multicast registration information to subscriber ports quickly and easily.
Gigabit managed Smart switches with 10G uplink ports DGS-1250 Series 24 1000BASE-T ports 4 10G SFTP+ uplink ports Layer 2 and Layer 3 Lite features Command line CLI, web GUI, console port Dual OS images and configuration files D-Link Lifetime Limited Warranty 10G Ethernet ports Four 10G SFP+ uplink ports. Backward compatibility with RJ-45 ports. Management interfaces Dedicated RJ-45 console port. full CLI1, graphical user interface, SNMP MIB for remote NMS (D-View 7). Duplicate operating system images and configuration files. Layer 2 features Port mirroring, Spanning Tree Procol (STP), RSTP, MSTP, Link Aggregation. Layer 3 Lite features Include IP interfaces, IPv6 Neighbour Discovery (ND) and IPv4/IPv6 static routing. Security controls Includes ARP Spoofing Prevention, port security - up to 64 MAC addresses per port, IMP-Binding and D-Link Safeguard Engine. QoS Surveillance Includes 802.11p Quality of Service, bandwidth control, Auto-Voice VLAN and Surveillance mode. Limited Lifetime Warranty Register your product to take advantage of the Lifetime Limited Warranty Affordable switches with 10G ports The DGS-1250 are affordable switches that can be deployed as main switches in mid-sized businesses and access switches in large corporations. Their benefits include high port density, high-bandwidth ports to avoid bottlenecks, redundancy to reduce downtime, easy-to-use graphical user interface, dedicated console and full control via CLI. Easier maintenance and less downtime STP, RSTP and MSTP support provides redundant connections, protects against loops, increases network reliability and minimises downtime for critical applications. The switches can operate over a wide temperature range, from -5 to 50°C. Dual operating system images and configuration files enable rapid software version and configuration changes to reduce downtime. 10G connections All DGS1250 series switches are equipped with four 10G SFP+ ports, reducing bottlenecks and allowing a choice of media types. Flexible uplink connections in both 1G/10G speeds enable data-intensive tasks. Switches suitable for video surveillance A graphical user interface designed for video monitoring is available in monitoring mode. The interface provides real-time information about the network topology, quick access to all functions, and easy and convenient network management. Layer 3 Lite Layer 3 Lite includes IP interfaces, IPv6 Neighbour Discovery (ND), ARP-Snooping Prevention, IGMP and MLD Snooping, LLDP and LLDP-MED. The DGS1250 series switches also provide IPv4/IPv6 static routing, which translates into more efficient network performance and is useful for scaling. QoS The DGS-1250 series switches support 802.11p Quality of Service, which prioritises the delivery of data to devices based on traffic type. It also enables bandwidth control to reduce unwanted broadcast network traffic. In addition, Auto-Voice and Auto-Surveillance VLAN features allow voice and video traffic to be controlled, which is automatically recognised and prioritised. Port-level security The D-Link Safeguard Engine supports protection against data flooding on the network as a result of a malicious attack. The switches also support IMP-Binding, which enables easy control of nodes in the event of IP address conflicts, as well as protecting against ARP spoofing and man-in-the-middle attacks. Network security is enhanced with ARP Inspection, DHCP Snooping and security and authentication features such as 802.1X port-based authentication and port protection for 64 MAC addresses per port. The DGS-1250 series switches also support network protection features such as Access Control List and DHCP Server Screening, which only allow valid DHCP Server IP addresses on specific ports. Network management tailored to your business The DGS-1250 family switches are supplied with the DLink Network Assistant (DNA) tool to help discover all devices using the DLink Discovery Protocol at the same L2 network layer. These are displayed on screen for quick access. This enables easy simultaneous configuration and basic settings on all found devices, along with password changes and software updates. The switches can be managed via a graphical interface or the free D-View 7 tool supporting SNMP. Each switch is equipped with a dedicated console port and full CLI, giving more control, accuracy and repeatability.
Gigabit managed Smart switches with 10G uplink ports DGS-1250 Series 48 1000BASE-T ports 4 10G SFTP+ uplink ports Layer 2 and Layer 3 Lite features Command line CLI, web GUI, console port Optional PoE with up to 370W power budget Dual OS images and configuration files D-Link Lifetime Limited warranty 10G Ethernet ports Four 10G SFP+ uplink ports. Backward compatibility with RJ-45 ports. Management interfaces Dedicated RJ-45 console port. full CLI1, graphical user interface, SNMP MIB for remote NMS (D-View 7). Duplicate operating system images and configuration files. Layer 2 features Port mirroring, Spanning Tree Procol (STP), RSTP, MSTP, Link Aggregation. Layer 3 Lite features IP interfaces, IPv6 Neighbour Discovery (ND) and IPv4/IPv6 static routing. Large PoE budget Power over Ethernet (PoE) budget of up to 370W to power multiple devices. Security control Includes ARP Spoofing Prevention, port security - up to 64 MAC addresses per port, IMP-Binding and D-Link Safeguard Engine. QoS Surveillance Includes 802.11p Quality of Service, bandwidth control, Auto-Voice VLAN and Surveillance mode. Limited Lifetime Warranty Register your product to take advantage of the Lifetime Limited Warranty. Affordable switches with 10G ports The DGS-1250 are affordable switches that can be deployed as main switches in medium-sized businesses and access switches in large corporations. Their benefits include high port density, high-bandwidth ports to avoid bottlenecks, useful for larger deployments, redundancy to reduce downtime, easy-to-use graphical user interface, dedicated console and full control via CLI. Easier maintenance and less downtime STP, RSTP and MSTP support provides redundant connections, protects against loops, increases network reliability and minimises downtime for critical applications. The switches can operate over a wide temperature range, from -5 to 50°C. Dual operating system images and configuration files enable rapid software version and configuration changes to reduce downtime. 10G connections All DGS1250 series switches are equipped with four 10G SFP+ ports, reducing bottlenecks and allowing a choice of media types. Flexible uplink connections in both 1G/10G speeds enable data-intensive tasks. Switches suitable for video surveillance A graphical user interface designed for video monitoring is available in monitoring mode. The interface provides real-time information about the network topology, quick access to all functions, and easy and convenient network management. Layer 3 Lite Layer 3 Lite includes IP interfaces, IPv6 Neighbour Discovery (ND), ARP-Snooping Prevention, IGMP and MLD Snooping, LLDP and LLDP-MED. The DGS1250 series switches also provide IPv4/IPv6 static routing, which translates into more efficient network performance and is useful for scaling. QoS The DGS-1250 series switches support 802.11p Quality of Service, which prioritises the delivery of data to devices based on traffic type. It also enables bandwidth control to reduce unwanted broadcast network traffic. In addition, Auto-Voice and Auto-Surveillance VLAN functions allow voice and video traffic to be controlled, which is automatically recognised and prioritised. Less cable, more PoE power All PoE switches in the DGS-1250 series support the IEEE 802.3af/at standard with a large power budget of 370 W. This means more power available for devices in remote locations powered by single Ethernet cables without the need for power outlets. This enables faster deployments of PoE devices such as VoIP phones, wireless access points and network cameras. Security at port level The D-Link Safeguard Engine supports protection against data flooding on the network as a result of a malicious attack. The switches also support IMP-Binding, which enables easy control of nodes in the event of IP address conflicts, as well as protecting against ARP spoofing and man-in-the-middle attacks. Network security is enhanced with ARP Inspection, DHCP Snooping and security and authentication features such as 802.1X port-based authentication and port protection for 64 MAC addresses per port. The DGS-1250 series switches also support network protection features such as Access Control List and DHCP Server Screening, which only allow valid DHCP Server IP addresses on specific ports.
DGS-1510 Series Gigabit Stackable Managed Smart Switches L2 management and security with L3 features CLI command line, console port and Web GUI 10G SFP+ physical stackable Static and MSTP routes PoE (Power over Ethernet) option Lifetime-Limited warranty upon registration CLI command line Supports a standard and commonly used command line interface for system management. Physical racking Physical stacking of up to 6 units in a stack with a total of 288 ports. 10G uplink ports With SFP+ ports, you can connect to other areas of the network with 10G throughput. Static routing Segregation of L3 traffic between switches, regardless of VLAN segemntation. Multiple images and confusion files Firmware updates and configuration testing without any risk of losing settings. Limited Lifetime Warranty Register your product to benefit from the Lifetime Limited Warranty. A large PoE power budget and extensive Layer 2 features make the DGS-1510 family switches a flexible and cost-effective solution for expanding any corporate network. The DGS1510 series is the latest generation of managed Smart switches with 10G SFP+ fibre ports for physical stacking or uplinks. The combination of high throughput, industry-standard CLI console compliance and the ability to use PoE makes the DGS1510 switch series an ideal solution for SMBs as well as enterprise environments. Full feature set with L3 traffic management The DGS1510 switch series features advanced network management tools via an industry-standard CLI console, console serial port and the GUI browser-based user interface. This provides your business with VLAN, multiple spanning tree protocol (MSTP), link aggregation (LACP), static routes, multiple firmware images and multiple configuration files. With powerful security features in the form of IGMP snooping, access control lists, port security tools and the D-Link Safeguard Engine, which protects the network from malicious denial-of-service attacks from broadcast, multicast and unicast flooding, the DGS-1510 switch family is a versatile tool for networked enterprise environments. Fibre optic Uplink ports Network expansion to suit the needs of any business is possible with fibre uplink ports with advanced management and security features. D-View 7: free network design and management system D-Link's free Network Assistant (DNA) system provides information on all connected devices and speeds up initial configuration. The free D-View 7 network management system comes with a licence for 25 nodes and 2 probes and full access to management tools. An optional licence upgrade allows for expanded network and analysis capabilities. Energy saving D-Link's DGS-1510 family of switches with D-Link Green technology enables energy savings without affecting operational performance or functionality.
DGS-1510 Series Gigabit Stackable Managed Smart Switches L2 management and security with L3 features CLI command line, console port and Web GUI 10G SFP+ physical stackable Static and MSTP routes PoE (Power over Ethernet) option Lifetime-Limited warranty upon registration CLI command line Supports a standard and commonly used command line interface for system management. Physical racking Physical stacking of up to 6 units in a stack with a total of 288 ports. 10G uplink ports With SFP+ ports, you can connect to other areas of the network with 10G throughput. Static routing Segregation of L3 traffic between switches, regardless of VLAN segemntation. Multiple images and confusion files Firmware updates and configuration testing without any risk of losing settings. Limited Lifetime Warranty Register your product to benefit from the Lifetime Limited Warranty. A large PoE power budget and extensive Layer 2 features make the DGS-1510 family switches a flexible and cost-effective solution for expanding any corporate network. The DGS1510 series is the latest generation of managed Smart switches with 10G SFP+ fibre ports for physical stacking or uplinks. The combination of high throughput, industry-standard CLI console compliance and the ability to use PoE makes the DGS1510 switch series an ideal solution for SMBs as well as enterprise environments. Full feature set with L3 traffic management The DGS1510 switch series features advanced network management tools via an industry-standard CLI console, console serial port and the GUI browser-based user interface. This provides your business with VLAN, multiple spanning tree protocol (MSTP), link aggregation (LACP), static routes, multiple firmware images and multiple configuration files. With powerful security features in the form of IGMP snooping, access control lists, port security tools and the D-Link Safeguard Engine, which protects the network from malicious denial-of-service attacks from broadcast, multicast and unicast flooding, the DGS-1510 switch family is a versatile tool for networked enterprise environments. Fibre optic Uplink ports Network expansion to suit the needs of any business is possible with fibre uplink ports with advanced management and security features. D-View 7: free network design and management system D-Link's free Network Assistant (DNA) system provides information on all connected devices and speeds up initial configuration. The free D-View 7 network management system comes with a licence for 25 nodes and 2 probes and full access to management tools. An optional licence upgrade allows for expanded network and analysis capabilities. Energy saving D-Link's DGS-1510 family of switches with D-Link Green technology enables energy savings without affecting operational performance or functionality.
Der D-Link DMS-105/E maximiert den Durchsatz des Netzwerks mit 2,5-Gbit/s-Multi-Gigabit-Ethernet an jedem Port des kompakten 5-Port-Switches. Ganz gleich, ob Nutzer eine Verbindung zu ihrem Netzwerkkern oder ein Netzwerk zwischen einzelnen Geräten einrichten möchten, mit diesem Switch können Nutzer ganz einfach eine Internetverbindung, Dateien, Musik und Videos teilen oder ein ruckelfreies Gaming-Erlebnis genießen.
Der auf wesentliche Managementfunktionen beschränkte EasySmart-Switch D-Link DGS-1100-05PDV2 eignet sich ideal zum Aufbau einer modernen Netzwerkumgebung. Spezielles IT Know-how ist nicht erforderlich, denn Installation als auch Konfiguration erfolgen via Plug & Play und komfortabler Einrichtung über die Web-basierte Schnittstelle. Zudem kommt der DGS-1100-05PDV2 ohne Lüfter aus und kann damit ohne störende Hintergrundgeräusche direkt am Arbeitsplatz eingesetzt werden. Zum Feature-Set zählt unter anderem 802.1p Priority Queuing, das zeitkritische Anwendungen priorisiert und damit eine problemlose Übertragung ermöglicht. Das Drosseln einzelner Anschlüsse ermöglicht so höchste Durchsatzraten für die wichtigsten Netzwerkgeräte. Als Bestandteil der erhöhten Sicherheit lässt sich unter anderem beim DGS-1100-05PDV2 die Funktion Storm Control, die den Switch vor Überlastungen schützt, optional hinzuschalten. Statische MAC-Adressen erlauben die Einschränkung des Netzwerkzuganges nur für zugelassene Endgeräte auf Portebene. Die integrierte VLAN-Funktion rundet die Ausstattung ab und unterstützt das Einrichten voneinander getrennter Netzwerksegmente - etwa für besonders sensible Unternehmensbereiche.
DGS-1100 Series Gigabit Managed Smart Switches Easy Layer 2 management Browser-based graphical user interface Optional PoE power supply Lifetime-Limited warranty upon registration Command line CLI via Telnet Support for a compact command line interface for system configuration and management. Static routing Segregation of L3 traffic between switches, regardless of VLAN segemntation. Limited Lifetime Warranty Register your product to take advantage of the Lifetime Limited Warranty. Simple. Easy. Smart. The DGS-1100 family of switches is an affordable solution for SOHO and SMB businesses, as well as for deployments in branch offices, conference rooms of large enterprises, wherever basic management functions are required. Intuitive graphical user interface The DGS-1100's graphical user interface enables easy management of Layer 2 features such as VLANs, Spanning Tree Protocol (STP) and link aggregation (static). With powerful security features in the form of IGMP snooping, Static MAC and Storm Control tools, the DGS-1100 family switches are a versatile tool for environments requiring uncomplicated deployment and easy configuration solutions without unnecessary complexity. Easy deployment and management D-Link's free Network Assistant (DNA) provides information about all connected devices and speeds up initial configuration. The free D-View 7 network management system comes with a licence for 25 nodes and 2 probes and full access to management tools. An optional licence upgrade allows for expanded network and analysis capabilities. PoE The DGS-1100 switch family includes switches with a large PoE power budget for easy installation of IP phones, wireless access points and IP cameras. Easy troubleshooting With loop detection and cable connection diagnostics, the DGS-1100 switch family effectively supports administrators in troubleshooting network problems. The loop detection function detects the formation of a loop on a port and automatically closes it. Cable connection diagnostics, on the other hand, allows the quality of copper cables to be tested, the type of cables to be recognised and errors to be detected. Energy saving D-Link Green technology enables the DGS-1100 Smart series to save power without sacrifices. The majority of the family utilises a fanless design, for silent and energy efficient operation. All are IEEE 802.3az compliant and feature Link Status detection and Time-Based PoE (excluding DGS-1100-05PD and DGS-1100-08P models).
