With its elegant wood design on the front panel and screwless tempered-glass side panel, the Rebel C70G RGB adds a stylish touch to any gaming room, living room or study. Apart from a striking appearance, modular installation options allow space for up to eleven 120 mm fans or two radiators. And along with perforated surfaces in and around the case, an optimal cooling performance is ensured, even for high-end setups. In addition, the continued efficiency of the PC case is supported by its future-proof USB-C and TRRS connections.The Rebel C70G RGB has a total of four 120 mm PWM fans with addressable RGB illumination pre-installed in the front and on the rear panel. These bathe the hardware in an atmospheric lighting that can be viewed through the elegant, screwless side panel made of tempered glass. In total, eleven 120 mm fans will find room in the case: In addition to the four pre-installed fans, three more can be mounted next to the mainboard tray and another behind the mainboard tray, while three fans can be installed under the top panel. And to keep the inside as clean as possible, there is a removable, easy-to-clean dust filter on the bottom panel of the case.To easily expand the airflow and cooling performance, the Rebel C70 has a mounting frame in the top of the case. This can be equipped with up to three 120 mm fans or a radiator of up to 360 mm and then easily reinserted under the top panel. If the cooling is to be expanded even further, up to three additional 120 mm fans or a 360 mm radiator can be installed next to the mainboard tray when the modular section of power supply tunnel has been removed.The Rebel C70 has a graphics card holder with a rubberized surface to allow for the optimal use of even heavy graphics cards. However, as with all Rebel series cases, the Rebel C Series Vertical Graphics Card Kit 4.0 is an option that is available for the vertical installation of the graphics card in the case.Apart from the fans, the required HDDS and SSDs can also be modularly installed. These can be placed on the mounting bracket and inserted as a bundle behind the mainboard tray. The Rebel C70 has space for up to three 3.5" HDDs or up to three 2.5" SSDs. In addition, there is enough room for graphics cards with a maximum length of 40 cm as well as a CPU cooler with a height of up to 16.5 cm. A power supply unit with a maximum length of 27 cm can also be accommodated.As far as connectivity is concerned, the Rebel C70 provides for a high degree of compatibility well into the future. The top panel of the case therefore has a USB-C port for mobile devices as well as a TRRS port for audio and microphone. Also, there are USB 3.0 ports available to connect two further devices.
The S25 Silent is designed for users who place special value on quiet operation: four integrated sound-damping mats effectively reduce noise levels, while preinstalled PWM fans and flexible cooling options ensure reliable performance. The case is complemented by an external 5.25-inch drive bay, modern connections, and practical dust-protection solutions. The S25 Silent is equipped all around with four sound-damping mats that effectively reduce noise during operation. This makes the case particularly suitable for quiet work or gaming systems without having to give up flexibility and performance. The case comes with two preinstalled 120-millimeter PWM fans that provide reliable air circulation. In total, up to seven fans can be installed. In addition, the S25 Silent supports the installation of a 360-millimeter radiator, offering suitable cooling options even for high-performance systems. With an external 5.25-inch drive bay on the front, the case provides a convenient expansion option for compatible drives or accessories. This keeps the system flexible, allowing classic components to be integrated as well. The I/O panel is equipped with a USB Type-C connector as well as two USB 3.0 connectors, enabling quick access to current peripherals. A magnetic dust filter on the top protects the system from contamination and can be easily removed for cleaning. This helps keep the installed hardware powerful and well maintained in the long term. The S25 Silent offers mounting options for up to two 3.5-inch or four 2.5-inch drives. Graphics cards with a length of up to 38 centimeters, CPU coolers with a height of up to 17.2 centimeters, and power supplies with a length of up to 22 centimeters can be integrated without any issues.
The S25-V2 is a versatile ATX case for modern systems that puts functionality and flexibility first. Pre-installed PWM fans, support for 360-millimeter radiators, and an external 5.25-inch drive bay provide a wide range of options for cooling and expansion. The overall package is rounded out by a USB Type-C port and a practical dust filter. With its deliberately understated appearance, the S25-V2 effortlessly fits into a variety of setups, keeping the focus on functionality and flexibility. The structured interior layout makes for a clear build and offers enough space for modern hardware components. The S25-V2 comes already equipped with two pre-installed 120-millimeter PWM fans, ensuring reliable air circulation. In total, up to seven fans can be installed. In addition, the case supports the installation of a 360-millimeter radiator, making it suitable for powerful systems as well. With an external 5.25-inch drive bay on the front, the case offers a practical expansion option for compatible drives or accessories—allowing the system to remain flexible and continue integrating classic components. The I/O panel is equipped with a USB Type-C port as well as two USB 3.0 ports, enabling quick access to current peripherals. A magnetic dust filter on the top protects the system from dirt and can be easily removed for cleaning, helping keep the installed hardware operating efficiently and well maintained in the long term. The S25-V2 provides mounting options for up to two 3.5-inch or four 2.5-inch drives. Graphics cards up to 38 centimeters in length, CPU coolers up to 17.2 centimeters in height, and power supplies up to 22 centimeters in length can be installed without any problems.
Sharkoon S25-W2 ARGB (Black, Tempered Glass, Model 2026)
Tootekood: 4044951045709GTIN: 4044951045709Cases
With the S25-W2 ARGB, powerful hardware is brought to the spotlight: ARGB lighting, a side panel made of tempered glass, and preinstalled PWM fans provide the foundation for impressive setups. Support for 360-millimeter radiators, an external 5.25-inch drive bay, and modern connections such as USB Type-C ensure high flexibility and a contemporary feature set. The S25-W2 combines ARGB lighting with a tempered glass side panel to make the installed hardware optimally visible. With the integrated 2-port ARGB controller, compatible LEDs can be controlled conveniently and individual lighting effects can be created, allowing the system to be visually customized. A preinstalled 120-millimeter ARGB PWM fan at the rear and a 120-millimeter PWM fan at the front ensure balanced airflow circulation. In total, up to seven fans can be installed. In addition, the case supports the installation of a 360-millimeter radiator, providing suitable cooling options for powerful systems. With an external 5.25-inch drive bay at the front, the case offers a practical expansion option for compatible drives or accessories, keeping the system flexible and allowing classic components to be integrated as well. The I/O panel is equipped with a USB Type-C connector and two USB 3.0 ports, enabling quick access to current peripherals. A magnetic dust filter on the top protects the system from dirt and can be easily removed for cleaning. This helps keep the installed hardware efficient and well maintained in the long term. The S25-W2 provides mounting options for up to two 3.5-inch or four 2.5-inch drives. Graphics cards with a length of up to 38 centimeters, CPU coolers with a height of up to 17.2 centimeters, and power supplies with a length of up to 22 centimeters can be integrated without any problem.
Armor A60 incorporates ultra-rugged rubber casing and internal suspension system, which enable perfect buffer effect and assure rigid protections against crushes, dust and spraying water. Furthermore, it passed the US military MIL-STD-810G (transit drop test) and IPX4 waterproof level, offering perfect data protection for outdoor users. Armor A60 introduces the SuperSpeed USB 3.0 interface that ensures ultimate ultra-fast data transfer speeds and offers users an extremely effortless and time-saving user experience.
Põrutus- ja veekindel väline kõvaketas; Mahutab 4TB andmeid; USB 3.0 standard, ühildub ka USB 2.0; Kiire 5 Gb/sekundis andmeedastus; Mugav kaablihoidik
Silicon Power Diamond D30. Seadme tüüp: HDD, Kõvakettamaht: 1000 GB, Kõvaketta suurus: 2.5". USB versioon: 3.0 (3.1 Gen 1). Toide USB kaudu. Toote värv: Must, Punane
Silicon Power Diamond D30. Seadme tüüp: HDD, Kõvakettamaht: 2000 GB, Kõvaketta suurus: 2.5". USB versioon: 3.0 (3.1 Gen 1). Toide USB kaudu. Toote värv: Must
Rackmount chassis with 24 hot-swap trays for 2.5” and 3.5” HDDs and SSDs, two USB 3.0 ports and status LEDs on the front panel, includes rail kit for easy integration, 4U form factor, compatible with E-ATX, SSI-EEB, and CEB motherboard form factors The SilverStone RM43-324-RS rackmount chassis is the perfect candidate for a mass storage solution in a 4U rackmount format. With 24 hot-swap trays, you can expand or replace storage at any time—ideal for a flexible server or a high-capacity workstation. Rackmount chassis with 24 hot-swap trays for optimal storage flexibility Easy management with two USB 3.0 ports and status LEDs Compatible with large motherboard form factors such as E-ATX, SSI-EEB, and SSI-CEB Seven expansion slots for high-end hardware and expandability Powerful cooling system with three hot-swap fans and two 80mm fans SilverStone RM43-324-RS: Rackmount Chassis for Demanding Hardware Everyone dreams of a powerful server or workstation. With this SilverStone rackmount chassis, you get one step closer to realizing that dream: a total of 24 hot-swap trays for HDDs and SSDs, a powerful cooling system, space for up to three 2-slot GPUs, and support for large server and workstation motherboards—all offered by the RM43-324-RS. Easy Management with Status LEDs and Hot-Swap Trays To ensure you never lose track of the 24 installed drives, each tray is equipped with a status LED. This way, you immediately know if one or more drives are malfunctioning. There are also dedicated status LEDs for network connection and power status. If a drive does fail, you can easily and quickly replace it thanks to the hot-swap capable trays. This minimizes any unnecessary downtime for your server or workstation. Large Motherboard Form Factors and Multiple Expansion Slots A conventional motherboard is usually not sufficient for a workstation or server. This chassis therefore offers ample space for SSI-EEB, SSI-CEB, and E-ATX motherboards. This allows you to integrate more RAM and additional storage media, fully utilizing your hardware’s performance potential. Thanks to the seven expansion slots, and with the right motherboard, you even have the option to install up to three 2-slot GPUs in this chassis. If you don’t need three graphics cards, the expansion slots are also perfect for cards such as afterburners, sound cards, or network cards. Powerful Cooling System To ensure your high-performance hardware is adequately cooled, this chassis is equipped with three industrial 120mm fans with a substantial thickness of 38 millimeters. Since these are also hot-swap capable, you can replace them immediately in the event of a fault. Heat dissipation is also supported by a CPU cooler of your choice up to 148mm in height and two additional 80mm fans at the rear of the chassis.
The SilverStone RM45-360 is a versatile 4U server chassis designed for high-performance configurations. With a robust steel construction, ample storage space, and effective cooling, it is ideal for data-intensive applications. Offers space for up to 8 HDDs (3.5") and 4 SSDs (2.5") for large storage capacities 360mm radiator support for effective cooling under load Front ports: USB-C and USB 3.0 for quick access Compatible with SSI-EEB and other formats for flexible builds 8 PCI slots for expansion cards and GPUs Flexible storage options Up to 8 HDDs and 4 SSDs provide extensive storage space – ideal for server solutions with high data throughput. Efficient cooling With support for a 360mm radiator and five fans, operating temperatures remain stable even under high loads. Easy expansion The 8 PCI slots and convenient front ports offer versatile expansion options and easy access.
Thanks to its construction entirely made of steel with a brushed aluminum surface, Crown 04 delivers excellent elegance and a refined look that blends seamlessly into any living space. With a height of 239 mm, Crown 04 meets the 5HE rackmount standard for compatibility with larger cards from the RTX-50 series, while also being prepared for future graphics card series. With 8 PCI expansion slots, it supports one or multiple high-end graphics cards, making it ideal for building a powerful HTPC system. The spacious interior supports motherboards with a form factor from ATX to SSI-EEB, enabling a wide range of configurations—from high-end gaming systems to powerful workstation setups for the living area. As a dedicated HTPC case, Crown 04 supports two 3.5-inch hard drives and three 2.5-inch SSDs, providing plenty of storage capacity to meet all the requirements of a living-area system. Crown 04 comes with three 120-mm fan mounting positions on the left side and an additional set on the top, each of which supports a 360-mm radiator. This configuration provides immense cooling performance with a focus on efficient CPU and GPU cooling. In the lower area of the front panel there is a cover with a sliding mechanism that, when opened, reveals a selection of connection options to meet all media and streaming needs, including a USB Type-C port, four USB 3.0 ports, and a combined audio connector. In addition, an adjustable LED display is located under this cover, which is almost indispensable for monitoring system activity and storage drive activity.
This highly expandable professional workstation case is designed for users who require maximum flexibility, high data security, and reliable cooling performance. It features eight hot-swap bays that support both 2.5-inch and 3.5-inch SAS or SATA SSDs and HDDs. The integrated backplane is designed for eight SAS/SATA drives, with 12 Gb/s Mini-SAS HD SFF-8643 connectors and SGPIO support, enabling fast and secure drive swaps during operation. The WS380-E is ideal for high-performance hardware configurations, accommodating both E-ATX and SSI-EEB motherboards and offering up to eight PCI expansion slots—providing ample space for multi-GPU setups. Expansion cards up to 370 millimeters long can be installed, ensuring that even large high-end graphics or accelerator cards fit easily. For reliable power supply, both standard ATX (PS2) power supplies and 2U redundant power supplies are supported, giving the system additional redundancy. The case is also highly versatile in cooling, supporting radiators up to 360 millimeters, making it ideally suited for powerful water cooling systems. Additionally, it offers two 5.25-inch bays and another 3.5-inch bay for extra drives or accessories. A lockable front door enhances the security of installed components, while the front I/O features USB-C and two USB 3.0 ports for fast and convenient access.
StarTech.com 2.5GbE USB-C to Ethernet Adapter with USB-A Converter, NBASE-T NIC, USB 3.0 Type-C 2.5/1G Multi Speed Network, Thunderbolt Compatible, Windows & Mac
Tootekood: U2GA-USB-C-ETHERNETGTIN: 65030905176USB kaablid ja adapterid
MC-AIRGAMING CASEThe MC-Air case combines high performance with modern design thanks to its elegant mesh front panel and four pre-installed 120mm FRGB Rainbow fans (3 in the front panel and 1 in the rear). The tempered glass side panel showcases your build and lighting, while the dual-chamber design optimizes airflow, keeping your components at optimal temperatures.Premium Gaming DesignThe mesh front panel with side vents maximizes airflow, keeping your components fresh and ensuring maximum performance. The tempered glass side panel adds a modern and elegant touch to your build, allowing you to showcase all your stylish components. Enjoy the perfect combination of high performance and eye-catching design.Maximum CoolingWith four integrated 120mm FRGB Rainbow fans and the ability to mount up to six fans and liquid coolers up to 360mm in length, the MC-AIR case offers exceptional cooling performance, ideal for demanding builds. The dual-chamber design improves airflow, keeping key components at optimal temperatures even in the most demanding builds.Optimal Internal CapacityThe MC-AIR supports ATX, Micro-ATX, and Mini-ITX motherboards, graphics cards up to 325mm, and CPU coolers up to 157mm. The storage system includes bays for two 3.5" HDDs and two 2.5" SSDs, offering unlimited versatility and options.Cable Management and Easy MaintenanceThe MC-AIR's advanced cable management system keeps your build neat and tidy while improving performance. Additionally, removable magnetic filters and a bottom dust filter make it easy to keep your system clean.Full ConnectivityEquipped with USB 3.0, USB 2.0, and HD audio ports on the top panel, the MC-AIR offers easy access to all your devices and complete connectivity convenience.
The Tower 300 Bubble Pink retains the iconic contours of its predecessors, featuring a vertical case design but shaped as an octagonal prism. This results in a case that takes up less space, offers greater flexibility, and minimizes disruption to your gaming and work area. The case provides exceptional cooling, supporting a radiator of up to 420 mm on the right side, which effectively lowers internal temperatures and maintains optimal system performance. The Tower 300 Bubble Pink is equipped with three 3 mm thick tempered glass panels at the front and two perforated panels on each side—all easily removable without the need for tools. It comes with two 140 mm PWM fans at the top for excellent cooling performance. In terms of storage compatibility, the Tower supports up to three 2.5-inch SSDs or three 3.5-inch HDDs in total. A USB 3.2 (Gen 2) Type-C port and two USB 3.0 ports are located on the top for direct access when needed.
The View 270 Plus TG ARGB is equipped with tempered glass panels on the front and side of the case to provide optimal viewing angles of your system inside. The case supports radiators of up to 360 mm on the top of the case and can meet the cooling needs of some of the more demanding systems while maintaining an appealing appearance to showcase your components. The View 270 comes with three 120 mm ARGB Lite fans, two of which are mounted on the side, and another at the rear of the case to provide exhaust airflow. Daisy-chain connections simplify cable management, and the lighting can be controlled via motherboard software from Asus, Gigabyte, MSI, and ASRock. The View 270TG Plus can support up to two 2.5-inch SSDs or two 3.5-inch HDDs, with one dedicated storage location and one shared storage location for each. Two USB 3.0 ports, one USB 3.2 Gen 2 Type C, and HD audio ports are located on the top to provide direct access when needed.
The View 270 Plus TG ARGB is equipped with tempered glass panels on the front and side of the case to provide optimal viewing angles of your system inside. The case supports radiators of up to 360 mm on the top of the chassis and can meet the cooling needs of some of the more demanding systems while maintaining an attractive appearance to showcase your components. The View 270 comes with three 120 mm ARGB Lite fans, two of which are mounted on the side, and one additional fan at the rear of the case to provide exhaust airflow. Daisy-chain connections simplify cable management, and the lighting can be controlled via motherboard software from Asus, Gigabyte, MSI, and ASRock. The View 270TG Plus can support up to two 2.5-inch SSDs or two 3.5-inch HDDs, with one dedicated mounting location and one shared mounting location each. Two USB 3.0 ports, one USB 3.2 Gen 2 Type-C, and HD audio ports are located on the top to provide direct access when needed.
The View 380 TG ARGB Mid Tower Chassis is a dual-chamber ATX case that supports hidden-connector motherboards from ASUS and MSI and comes equipped with four 120 mm ARGB Lite fans with hydraulic bearings. Its RGB lighting can be controlled via motherboard software from ASUS, GIGABYTE, MSI, and AS-Rock. In addition, up to ten 120 mm fans can be installed in the case, and up to one 360 mm radiator can be mounted at the top and one 280 mm/240 mm radiator on the right, giving end users more flexibility when building their ideal configuration. The View 380 TG ARGB Mid Tower Chassis is designed for better visibility, allowing users to enjoy their system through the tempered glass front and left panels. The View 380 TG ARGB Mid Tower Chassis offers good expandability. It can support a CPU cooler with a maximum height of 160 mm, GPU placement up to 415 mm in length, and a power supply up to 200 mm in length. For storage compatibility, the View 380 TG ARGB Mid Tower Chassis offers maximum support for up to two 2.5-inch SSDs or one 3.5-inch hard drive. Two USB 3.0 ports, one USB 3.2 Gen 2 Type-C, and HD Audio ports are located on the top to provide direct access when needed.
The View 380 XL TG ARGB Mid-Tower case was designed for next-generation motherboards and features a special design that supports both standard motherboards and motherboards with hidden connectors from ASUS, MSI, and GIGABYTE. The dual-chamber design provides more build space, improved cable management, and increased airflow for greater flexibility. The View 380 XL TG ARGB Mid-Tower case offers enhanced visibility with tempered glass on the front and left side, allowing users to showcase their system. For effective cooling, users can place a 360 mm radiator on the top and on the motherboard side. The case features three 120 mm ARGB Lite reverse fans with hydraulic bearings on the motherboard side and one 120 mm ARGB Lite fan with a hydraulic bearing at the rear. The impressive lighting effects can be controlled via motherboard software from ASUS, GIGABYTE, MSI, and ASRock. The integrated GPU holder prevents graphics card sag and provides additional support. The View 380 XL TG ARGB Mid-Tower case offers good expansion options. It can support a CPU cooler with a maximum height of 160 mm, GPU placement up to 420 mm in length, and a power supply up to 180 mm in length. The case is optimized for excellent cooling performance and comes with four 120 mm ARGB Lite fans with hydraulic bearings, while supporting installation of up to ten 120 mm fans. In terms of storage compatibility, the View 380 XL TG ARGB Mid-Tower case offers maximum support for up to three 2.5-inch SSDs or one 3.5-inch HDD. The bottom I/O ports include two USB 3.0 ports, one USB 3.2 Gen 2 Type-C port, and one HD Audio port, providing convenient access when the PC case is placed on a desk.
The View 380 XL WS ARGB Mid-Tower Case is designed for next-generation motherboards and features a specialized design that supports both standard motherboards and motherboards with hidden connectors from ASUS, MSI, and GIGABYTE. The dual-chamber layout provides more building space, improved cable management, and increased airflow for greater flexibility. The View 380 XL WS ARGB Mid-Tower Case offers enhanced visibility with tempered glass on the front and left side, allowing users to showcase their system. For optimal cooling, users can install a 360mm radiator at the top and on the motherboard side. The case includes three 120mm ARGB-Lite reverse fans with hydraulic bearings on the motherboard side and one 120mm ARGB-Lite fan with a hydraulic bearing at the rear. The stunning lighting effects can be controlled via motherboard software from ASUS, GIGABYTE, MSI, and ASRock. The integrated GPU bracket prevents graphics card sag and provides additional support. The View 380 XL WS ARGB Mid-Tower Case offers excellent expansion options. It supports a CPU cooler with a maximum height of 160mm, GPU installation up to 420mm in length, and a power supply up to 180mm in length. The case is optimized for superior cooling performance and comes with four 120mm ARGB-Lite fans with hydraulic bearings, and supports up to ten 120mm fans in total. For storage compatibility, the View 380 XL WS ARGB Mid-Tower Case supports up to three 2.5-inch SSDs or one 3.5-inch HDD. The lower I/O ports include two USB 3.0 ports, one USB 3.2 Gen 2 Type-C port, and one HD audio jack, providing convenient access when the PC case is on a desk.
