Uni-T 60A UT211B Precision Clamp MeterThe Uni-T UT211B is a precision mini clamp meter designed for measurements requiring high accuracy, particularly when working with electronics, photovoltaic systems, and circuits in electric vehicles. The device measures AC and DC current up to 60 A, AC/DC voltage up to 600 V, resistance up to 60 MΩ, and capacitance up to 62 mF, while the AC current measurement resolution of 0.01 A allows for convenient monitoring of even small values. Its compact, lightweight design makes the model well-suited for use in tight and hard-to-reach spaces.High accuracy and practical featuresThe UT211B offers a maximum reading of 6000, automatic range switching, and True RMS measurement, which translates to greater precision and convenience in daily work. The device is equipped with VFC, non-contact voltage detection (NCV), Zero mode, diode test, and a continuity buzzer, making it well-suited for diagnosing and testing various electrical systems. The Data Hold function facilitates reading results, and the LCD backlight improves visibility in dimly lit areas.Compact design and ready for useThe meter weighs 170 g and measures 175 × 60 × 33.5 mm, making it comfortable for everyday use and easy to carry. Automatic shut-off after approximately 15 minutes, a low-battery indicator, and input protection enhance safety and ease of use. The kit includes batteries and test leads, so the Uni-T UT211B is ready to use right out of the box.IncludedClamp meterBatteries x2Test leadsCarrying caseUser manual SpecificationsManufacturerUni-TModelUT211BTypePrecision clamp meterAC current60A ±(2.0%+5)AC current resolution0.01ADC current60A ±(2%+3)AC voltage600V ±(0.8%+3)DC voltage600V ±(0.7%+3)Resistance60MΩ ±(0.8%+2)Capacitance62mF ±(4%+5)Maximum reading6000FunctionsTrue RMS, NCV, VFC, Zero mode, diode test, continuity test, Data Hold, LCD backlight, auto power off, low battery indicator, input protection, continuity buzzer, auto range switchingInput impedance for DCV≥10MΩPower supply1.5V battery (R03) x2Display dimensions39.3mm x 26.5mmWeight170gDimensions175mm x 60mm x 33.5mmColorRed and grayCertificationsCE, UKCA, cETLus
Uni-T UT200A Digital Clamp MeterThe Uni-T UT200A smart clamp meter is a simple and practical model designed for everyday service and electrical installation work. Thanks to its clamp design, it allows for quick current measurement without having to open the circuit, which significantly facilitates work in the field and on home installations.Basic measurements for everyday useThe UT200A model allows for measuring AC current up to 200 A and AC and DC voltage up to 600 V, making it ideal for standard inspection and repair tasks. The resistance measurement function also allows for checking basic electrical components and circuits.Simple operation and practical featuresManual range selection provides greater control over the measurement, which is useful in simple applications. The meter is equipped with functions such as a diode test, continuity test, and Data Hold, which speed up work and make it easier to read results. The backlit display and low battery indicator improve the comfort of everyday use.Compact design and safe operationThe compact housing and 28 mm jaw opening allow for comfortable use of the device even in hard-to-reach places. Compliance with safety category CAT III 600V enables safe use when working with electrical installations.IncludedClamp meterBattery x1Test leadsCarrying caseUser manual SpecificationsManufacturerUni-TModelUT200ATypeClamp meterAC current2A / 20A / 200A ±(1.5%+5)AC voltage600V ±(1.5%+5)DC Voltage600V ±(1%+3)Resistance20kΩ ±(1%+2)Maximum Reading2000Range SelectionManualFunctionsDiode test, continuity test, Data Hold, LCD backlight, low battery indicatorJaw opening28 mmDisplay35.6 x 18 mmPower supply9V battery (6F22)Device dimensions208 x 76 x 30 mmNet weight260 gColorRed and graySafetyCAT III 600V
Uni-T UT202F Digital Clamp MeterThe Uni-T UT202F universal clamp meter is a practical tool for everyday electrical measurements. It is ideal for inspecting installations, diagnosing basic circuits, and measuring AC current without having to open the circuit. Thanks to its clamp design, it allows for convenient and quick measurements in the field.Extended measurement capabilitiesThe UT202F model allows for AC current measurement up to 600 A and AC and DC voltage measurement up to 600 V. In addition, it offers resistance measurement, capacitance measurement up to 60 mF, and frequency measurement up to 10 MHz, making it suitable for more complex diagnostics.User-friendly featuresThe multimeter is equipped with True RMS, an LPF filter, and an NCV function, which enhance usability and assist during measurements in variable conditions. An additional advantage is the ability to measure low AC voltages down to 600 mV.Clear design and safe operationThe large backlit screen improves the readability of results, and the higher resolution facilitates more precise parameter monitoring. Compliance with safety categories CAT II 600V and CAT III 300V allows for safe use of the device during daily measurements.IncludedClamp meterBatteries x2Test leadsUser manual SpecificationsManufacturerUni-TModelUT202FTypeClamp meterAC current0.06~600A ±(2%+10)AC frequency50Hz~100Hz ±(1%+5)AC voltage600V ±(0.8%+5)AC voltage frequency10Hz~10kHz ±(1%+5)DC voltage600V ±(0.5%+2)Resistance60MΩ ±(0.8%+2)Capacitance60mF ±(4%+5)Frequency10Hz~10MHz ±(1%+5)Maximum reading6000FunctionsTrue RMS, NCV, LPF filter, low ACV measurement 600mV, LCD backlightJaw opening28 mmPower supply2x 1.5V battery (R03)SafetyCAT II 600V / CAT III 300VDimensions215 x 63 x 36 mmCertificationsCE, UKCA, cETLus
Uni-T UT201R Digital Clamp MeterThe Uni-T UT201R universal clamp meter is a practical tool for everyday electrical measurements. It is ideal for inspecting installations, diagnosing basic circuits, and measuring AC current without having to open the circuit. Thanks to its clamp design, it allows for convenient and quick measurements in the field.Basic measurements for everyday workThe UT201R model allows for measuring AC current up to 400 A and AC and DC voltage up to 600 V, making it well-suited for typical service and inspection tasks. Resistance and voltage frequency measurements further enhance its practical application when checking circuits and devices.User-friendly featuresThe multimeter is equipped with True RMS, which provides more reliable results when measuring alternating signals. Features such as NCV, diode test, continuity test, Data Hold, Max/Min, and auto-off simplify daily work and enhance user convenience.Clear design and safe operationThe large backlit screen makes it easy to read results, and the 28 mm jaw opening allows for a comfortable grip on the wire during measurement. Compliance with safety categories CAT II 600V and CAT III 300V allows the device to be used in typical electrical applications.IncludedClamp meterBatteries x2Test leadsUser manual SpecificationsManufacturerUni-TModelUT201RTypeClamp meterAC current0.04~400A ±(2%+10)AC frequency50Hz~100Hz ±(1%+5)AC voltage600V ±(0.8%+5)AC voltage frequency10Hz~10kHz ±(1%+5)DC voltage600V ±(0.5%+2)Resistance40MΩMaximum reading4000FunctionsTrue RMS, NCV, diode test, continuity test, Data Hold, Max/Min, auto power off, LCD backlightJaw opening28 mmPower supply2x 1.5V battery (R03)SafetyCAT II 600V / CAT III 300VDimensions215 x 63 x 36 mmCertificationsCE, UKCA, cETLus
Uni-T UT202BT Smart Clamp MeterThe Uni-T UT202BT Smart Clamp Meter is a modern measurement tool that combines ease of use with practical features for everyday electrical diagnostics. The clamp design allows for quick current measurement without opening the circuit, while the compact form factor and one-handed operation make it easy to use in the field and during installations.Wide measurement range and convenient operationThe UT202BT model measures AC/DC voltage up to 600V and AC current up to 600A, making it ideal for typical service, inspection, and installation tasks. Additionally, it offers resistance, capacitance, temperature, and AC frequency measurements, expanding its utility for testing various devices and installations.Features that make everyday work easierThe meter is equipped with True RMS, automatic range switching, a Data Hold function, and non-contact voltage detection (NCV). Another major advantage is Bluetooth connectivity, which allows data to be transferred to a mobile app for more convenient monitoring of measurements. The backlit screen and built-in flashlight improve working comfort in dimly lit areas, while the low battery indicator and automatic shut-off assist in daily use.Clear design and safe operationThe clear display, dual parameter readout, and 28 mm jaw opening facilitate efficient measurements. The device meets CAT II 600V / CAT III 300V safety requirements, making it well-suited for typical electrical applications. An additional advantage is the ability to measure temperature and test diodes and circuit continuity, which increases the versatility of this model.IncludedClamp meterTest leadsThermocouple2 x AAA batteriesUser manual SpecificationsManufacturerUni-TModelUT202BTTypeSmart clamp meterAC current600A ±(2%+5)AC frequency50Hz~60Hz ±(1%+5)AC voltage600V ±(0.8%+5)DC voltage600V ±(0.5%+2)Resistance60MΩ ±(0.8%+2)Capacitance100mF ±(4%+5)Temperature-40°C~1000°C / -40°F~1832°F ±(1.5%+5)Maximum reading6000True RMSYesBluetoothYesRange switchingAutomaticFunctionsNCV, diode test, continuity test, Data Hold, flashlight, LCD backlight, auto power off, low battery indicator, low-pass filter, inrush current detection, Peak HoldDual displayV+Hz, A+HzJaw opening28 mmPower supply2x 1.5V battery (AAA)SafetyCAT II 600V / CAT III 300VDisplay dimensions37 mm x 25 mmWeight248 gDimensions201 mm x 63.5 mm x 35 mmColorRed and grayCertificationsCE, UKCA, cETLus
Uni-T UT202R Digital Clamp MeterThe Uni-T UT202R universal clamp meter is a practical tool for everyday electrical measurements. It is ideal for inspecting installations, diagnosing basic circuits, and measuring AC current without having to open the circuit. Thanks to its clamp design, it allows for convenient and quick measurements in the field.Basic measurements for everyday workThe UT202R model allows for measuring AC current up to 400 A and AC and DC voltage up to 600 V, and additionally enables the measurement of capacitance and temperature. This makes it better suited for broader diagnostics of electrical and electronic devices.User-friendly featuresThe multimeter is equipped with True RMS, which provides more reliable results when measuring alternating signals. Features such as NCV, diode test, continuity test, Data Hold, and Max/Min simplify daily work and speed up operation.Clear design and safe operationThe large backlit screen makes it easy to read results, and the 28 mm jaw opening allows for a comfortable grip on the wire during measurement. Compliance with safety categories CAT II 600V and CAT III 300V allows the device to be used in typical electrical applications.Included in the setClamp meterBatteries x2Test leadsThermocoupleUser manual SpecificationsManufacturerUni-TModelUT202RTypeClamp meterAC current0.04~400A ±(2%+10)AC Frequency50Hz~100Hz ±(1%+5)AC Voltage600V ±(0.8%+5)AC Voltage Frequency10Hz~10kHz ±(1%+5)DC Voltage600V ±(0.5%+2)Resistance40MΩCapacitance4mF ±(4%+5)Temperature-40°C~1000°C ±(1.5%+5)Maximum reading4000FunctionsTrue RMS, NCV, diode test, continuity test, Data Hold, Max/Min, LCD backlightJaw opening28 mmPower supply2x 1.5V battery (R03)SafetyCAT II 600V / CAT III 300VDimensions215 x 63 x 36 mmCertificationsCE, UKCA, cETLus
Uni-T UT203R Digital Clamp MeterThe Uni-T UT203R universal clamp meter is a practical tool for everyday electrical measurements. It is ideal for inspecting installations, diagnosing basic circuits, and measuring current without having to open the circuit. Thanks to its clamp design, it allows for convenient and quick measurements in the field.AC and DC Current MeasurementThe UT203R model allows for the measurement of AC and DC current up to 400 A and AC and DC voltage up to 600 V, making it more versatile for everyday use. Additionally, it offers capacitance and frequency measurement, which expands its applications in diagnosing various devices.User-friendly featuresThe multimeter is equipped with True RMS, NCV, diode test, continuity test, Data Hold, and Relative mode. The zeroing function for DC measurement makes working with DC current measurements more convenient and improves user comfort.Clear design and safe operationThe large backlit screen makes it easy to read results, and the 28 mm jaw opening allows for a comfortable grip on the wire during measurement. Compliance with safety categories CAT II 600V and CAT III 300V allows the device to be used in typical electrical applications.Included in the setClamp meterBatteries x2Test leadsUser manual SpecificationsManufacturerUni-TModelUT203RTypeClamp meterAC current0.04~400A ±(2%+5)DC current0.04~400A ±(2%+5)AC voltage600V ±(0.8%+5)AC voltage frequency10Hz~60kHz ±(0.5%+2)DC voltage600V ±(0.5%+2)Resistance40MΩCapacitance40mF ±(4%+5)Frequency10Hz~10MHz ±(0.1%+4)Maximum reading4000FunctionsTrue RMS, NCV, diode test, continuity test, Data Hold, Relative mode, LCD backlightJaw opening28 mmPower supply2x 1.5V battery (R03)SafetyCAT II 600V / CAT III 300VDimensions215 x 63 x 36 mmCertificationsCE, UKCA, cETLus
Uni-T UT205E Digital Clamp MeterThe Uni-T UT205E digital clamp meter is a versatile tool for working with electrical installations and diagnosing equipment. Thanks to its clamp design, it allows for quick current measurement without opening the circuit, which significantly simplifies field work and operations at switchgear panels.Wide Measurement RangeThe UT205E model allows for measuring AC current up to 1000A and AC/DC voltage up to 1000V, enabling work on more demanding installations. Additionally, it supports resistance, capacitance, frequency, and duty cycle measurements, expanding its diagnostic capabilities.Features that make work easierTrue RMS ensures more accurate measurements, while features such as NCV, backlight, and flashlight improve working comfort. Automatic range selection and a clear display facilitate quick measurements in various conditions.Intuitive design and safetyThe large screen and 42 mm jaw opening allow for comfortable work even with thick cables. The device complies with CAT III 1000V / CAT IV 600V standards, ensuring safe use.IncludedClamp meterBatteries x3Test leadsUser manual SpecificationsManufacturerUni-TModelUT205ETypeTrue RMS Clamp MeterAC Current1000A ±(2%+5)AC Current Range50Hz ~ 60HzAC Voltage1000V ±(1.2%+3)DC Voltage1000V ±(0.5%+5)AC Voltage Range40Hz ~ 400HzResistance60MΩ ±(1%+2)Capacitance60mF ±(4%+5)Frequency10Hz ~ 1MHz ±(0.1%+3)Duty cycle10% ~ 90% ±(2.6%+7)Maximum reading6000FunctionsTrue RMS, NCV, backlight, flashlight, automatic range switchingJaw opening42 mmPower supply3x 1.5V battery (R03)Display43 x 45 mmDimensions272 x 81 x 43.5 mmWeight465 gSafetyCAT III 1000V / CAT IV 600VCertificationsCE, UKCA, cETLus
Uni-T UT206B Digital Clamp MeterThe Uni-T UT206B digital clamp meter is a versatile tool for working with electrical installations and diagnosing equipment. Thanks to its clamp design, it allows for quick current measurement without opening the circuit, which significantly facilitates work in the field and at switchgear.Extended measurement capabilitiesThe UT206B model measures AC current up to 1000A and AC/DC voltage up to 1000V, and additionally offers temperature and inrush current measurement. The LoZ and LPF functions provide more accurate results in industrial installations.Features that make work easierTrue RMS, NCV, inrush mode, and a low-pass filter increase measurement accuracy. The ability to connect a Flex probe allows the current measurement range to be extended up to 3000A.Intuitive design and safetyA large display with a bar graph and a 42 mm jaw opening make work easier. The device complies with CAT III 1000V / CAT IV 600V standards.IncludedClamp meterBatteries x3Test leadsTemperature probeUser manual SpecificationsManufacturerUni-TModelUT206BTypeTrue RMS clamp meterAC current1000A ±(2%+5)Inrush current1000A ±(10%+10)AC voltage1000V ±(1.2%+3)DC voltage1000V ±(0.5%+5)LPF ACV1000V ±(2%+5)LoZ ACV1000V ±(2%+5)AC voltage range40Hz ~ 400HzResistance60MΩ ±(1%+2)Capacitance60mF ±(4%+5)Temperature-40°C ~ 1000°C ±(1%+2)Frequency10Hz ~ 1MHz ±(0.1%+3)Duty cycle10% ~ 90% ±(2.6%+7)Maximum reading6000FunctionsTrue RMS, NCV, LPF, LoZ, inrush current measurement, bargraph, Flex probe capabilityJaw opening42 mmPower supply3x 1.5V battery (R03)Display43 x 45 mmDimensions272 x 81 x 43.5 mmWeight465 gSafetyCAT III 1000V / CAT IV 600VCertificationsCE, UKCA, cETLus
Uni-T UT207B Digital Clamp MeterThe Uni-T UT207B digital clamp meter is a versatile tool for working with electrical installations and diagnosing equipment. Thanks to its clamp design, it allows for quick current measurement without opening the circuit, which significantly facilitates work in the field and at switchgear panels.Features that make work easierThe UT207B model was designed for the most demanding applications, enabling precise measurement of AC and DC current up to 1000A and AC/DC voltage up to 1000V. Thanks to a wide range of electrical parameters and advanced features such as True RMS, Zero mode, NCV, and LPF and LoZ filters, the device guarantees the highest accuracy of results even in difficult conditions. Additionally, the built-in inrush current measurement function allows for detailed analysis of transient loads.Clear Design and SafetyA large bargraph display and robust construction ensure ease of use. The device complies with CAT III 1000V / CAT IV 600V standards.IncludedClamp meterBatteries x3Test leadsUser manual SpecificationsManufacturerUni-TModelUT207BTypeTrue RMS clamp meterAC current1000A ±(2%+5)DC current1000A ±(2%+5)Inrush current1000A ±(10%+10)AC voltage1000V ±(1.2%+3)DC voltage1000V ±(0.5%+5)LPF ACV1000V ±(2%+5)LoZ ACV1000V ±(2%+5)AC voltage range40Hz ~ 400HzResistance60MΩ ±(1%+2)Capacitance60mF ±(4%+5)Frequency10Hz ~ 1MHz ±(0.1%+3)Duty cycle10% ~ 90% ±(2.6%+7)Maximum reading6000FunctionsTrue RMS, NCV, LPF, LoZ, Zero mode, inrush current measurement, bargraphJaw opening42 mmPower supply3x 1.5V battery (R03)Display43 x 45 mmDimensions272 x 81 x 43.5 mmWeight420 gSafetyCAT III 1000V / CAT IV 600VCertificationsCE, UKCA, cETLus
Uni-T UT208B Digital Clamp MeterThe Uni-T UT208B digital clamp meter is the most versatile tool in the series, designed for use in demanding electrical installations. Thanks to its wide range of functions, it is ideal for diagnostics and maintenance.Maximum measurement capabilitiesThe UT208B model allows for measuring AC and DC current up to 1000A and voltage up to 1000V, as well as precise measurement of temperature, frequency, and capacitance. The highest accuracy and operational safety are guaranteed by a set of advanced features, such as True RMS, NCV, LPF, LoZ, and Zero mode. The device handles the analysis of sudden load spikes with ease thanks to inrush current measurement, and the optional Flex probe allows for an impressive expansion of the measurement range.Clear Design and SafetyA large screen, bar graph, and robust construction ensure ease of use. The device complies with CAT III 1000V / CAT IV 600V standards.IncludedClamp meterBatteries x3Test leadsTemperature probeUser manual SpecificationsManufacturerUni-TModelUT208BTypeTrue RMS clamp meterAC current1000A ±(2%+5)DC current1000A ±(2%+5)Inrush current1000A ±(10%+10)AC voltage1000V ±(1.2%+3)DC voltage1000V ±(0.5%+5)LPF ACV1000V ±(2%+5)LoZ ACV1000V ±(2%+5)AC voltage range40Hz ~ 400HzResistance60MΩ ±(1%+2)Capacitance60mF ±(4%+5)Temperature-40°C ~ 1000°C ±(1%+2)Frequency10Hz ~ 1MHz ±(0.1%+3)Duty cycle10% ~ 90% ±(2.6%+7)Maximum reading6000FunctionsTrue RMS, NCV, LPF, LoZ, Zero mode, inrush current measurement, bargraph, Flex probe capabilityJaw opening42 mmPower supply3x 1.5V battery (R03)Display43 x 45 mmDimensions272 x 81 x 43.5 mmWeight420 gSafetyCAT III 1000V / CAT IV 600VCertificationsCE, UKCA, cETLus
