Kõik hinnakirjad

The slim USB 3.2 Gen 1 (USB 3.0) hub AXAGON HUE-F7A with a 1 m long USB cable easily and quickly connects up to seven USB devices to the computer at the same time. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5Gb/s. The metal hub body is made of aluminum and provides perfect mechanical protection. Elegant finely structured body surface against fingerprint. Permanently fixed 1 m long USB-A cable is suitable for use with a desktop computer. The advantage is a separate USB-A port on the front, which is used to connect larger flash disks, readers and other USB devices. The versatility of this USB hub is also enhanced by the built-in micro USB connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply several external disks or increase the number of mobile phones you can charge. It can handle the permanent connection of several external drives even without an external power supply to the hub. After connecting the external power supply, it is possible to work with five external disks at the same time. Thanks to the Charging hub function, mobile devices can be charged even without connecting to a computer. An unused charger turns this USB hub into a charging hub for free. The hub will also enable charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type A male connector on a fixed 1 m long cable. Outputs: 7x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Blue LED indicates the connection to the computer's USB port. Dimensions 145 x 42 x 15 mm. Weight 110 g (incl. cable). USB cable length 1 m. The hub power mode via USB cable (bus power): USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. In this power mode, the USB hub is also able to work with up to 3 magnetic 2.5" external disks simultaneously. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 3A at 5V (depending on the capabilities of the computer's USB port). The hub power mode via USB + external USB charger (self power): Integrated micro USB connector for additional powering the hub. Any mobile device wall charger (not included) with micro USB connector can be used (recommended output current of the charger min. 2A). In this power mode, the USB hub is able to work with up to 5 magnetic 2.5" external disks. However, for reliable long-term operation of the hub, we recommend connecting a maximum of 3 magnetic external 2.5" drives at the same time. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 5A at 5V (depending on the capabilities of the external wall charger). Independent charging hub mode without connecting to a computer (charging hub): After turning off the connected computer or without connecting to the computer, the hub works with power via a USB charger as a separate charging USB hub, just plug a standard charger with a micro USB connector into the hub (micro USB input). Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports, the total charging current (which is divided into ports) reaches up to 3A at 5V (depending on the capabilities of the external power adapter). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SuperSpeed USB hub with fixed 1 m long USB cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

The universal external AXAGON EEM2-SB2 RAW enclosure with a USB 3.2 Gen2 interface is designed for M.2 NVMe or SATA SSD drives. The double-sided USB-C connector on the enclosure ensures reliable connectivity. The package includes both a USB-C to USB-C cable for connecting the enclosure to a computer and a USB-C to USB-A adapter. You can connect the enclosure to any available USB port on your notebook. The second generation of the fast USB interface lets you take advantage of the speed of modern M.2 SSD drives. The transfer rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. This external M.2 enclosure also supports other modern features such as UASP, TRIM, and allows reading S.M.A.R.T. information to monitor the condition of the disk. Standby is supported when idle. A unique feature, thanks to the new chipset, is the ability to use both M.2 NVMe and SATA drives. You don't have to worry about which type of M.2 drive you install. An advantage is the support for three different SSD card lengths: 42, 60, and 80 mm. M.2 cards can be single-sided or double-sided, and there is no limit on the capacity of the inserted SSD. The tool-free enclosure opening makes installing and removing the M.2 SSD easy. Drive replacement is quick and convenient, expanding the enclosure's use—such as for data migration, testing, and more. The outer metal housing features a black, elegant brushed finish that prevents unwanted fingerprints. The enclosure's rounded design ensures comfortable handling. The aluminum enclosure, cooling holes, and the thermal conductive pad provide excellent cooling for the installed M.2 SSD, extending its lifespan and preventing the disk from slowing down due to "Thermal Throttling". By inserting an M.2 SSD, you'll easily create a fast, compact external disk. The enclosure can be used with computers and notebooks, as well as with smartphones and tablets. Input: USB 3.2 Gen 2 (USB 3.1 Gen 2) SuperSpeed USB 10 Gbps. Speed up to 10 Gbit/s. Connection via reversible USB Type-C female connector. Device support: NVMe M.2 SSD drives, SATA M.2 SSD drives, designed for M key and B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Compatible with USB 3.2 Gen 2, backward compatible with USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), USB 2.0. Supports transfer rates of 10,000 / 5,000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / HighSpeed). Supports M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs with no maximum capacity restriction. Supports M.2 drives in sizes 2242, 2260, 2280 mm. Supports both single-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), with bit rates up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total enclosure bandwidth/transfer rate is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). The real enclosure bandwidth/transfer rate is about 1000 MB/s (1 GB/s), due to the limitations of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and higher. Supports TRIM functionality to limit gradual degradation of SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) for monitoring disk status. SSD boot support in external enclosure. Hot Plug support allows device connection while running. Full Plug and Play support. Standby support - The drive sleeps after 5 minutes of inactivity. Powered via USB 3.0 bus up to 900mA from a single USB port (sufficient in all cases). Blue LED indicator signals connection to the computer's USB port (steady light) and data transmission (blinking). Robust aluminum body, cooling holes, and thermal conductive pad help cool the M.2 SSD. Higher enclosure surface temperature is not a defect—the aluminum body dissipates the disk's operating heat more efficiently into the environment. Connection via USB 3.2 Gen 2 Type-C female connector. Includes a USB Type-C male to USB Type-C male cable (20 cm) and USB Type-C female to USB Type-A male adapter. Other data: External enclosure dimensions: 94 × 41 × 10 mm. Weight: 35 g (without USB cable and M.2 SSD drive). Supported operating systems: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32-bit and 64-bit Windows OS versions supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher, Android (OS and device support required). Note: For Windows 7, check OS support and driver availability from the M.2 SSD manufacturer. Package contains: USB-C 3.2 Gen 2 combined external enclosure for SATA M.2 SSD, 20 cm USB-C to USB-C cable with USB-C to USB-A adapter, 1 thermal conductive pad, mounting material, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

The AXAGON ADSA-FPX FAST PORT X universal adapter with USB-C 10Gbps and SATA 6G interface is designed to easily connect a 2.5" / 3.5" SATA hard drive or SSD to your computer. Thanks to the fast USB 3.2 Gen 2 interface with the transmission rate of up to 10 Gb/s, the speed of 2.5" SSDs is not limited and is approximately 20% faster than USB 3.2 Gen 1 (USB 3.0) adapters or boxes. In the package you will find a USB-C USB-C cable 60 cm with a fixed USB-C -> USB-A reduction. This solution enhances the versatility of the adapter, so you can connect it to any USB port on your computer, whether it's a double-sided USB-C connector or a traditional USB-A connector. Also included is a 12V/2A (24W) power adapter for powering 3.5" hard drives. The adapter with a 2.5" SSD/HDD just needs to be powered over the USB bus, so there is no need to manipulate the AC adapter. The USB to SATA reduction also supports all important features for seamless operation with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the reduction, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with USB 480Mbps, USB 5Gbps, USB 20Gbps, USB4 and Thunderbolt 3/4. Device support: 2.5" SSDs/HDDs, 3.5" HDDs, SATA M.2 SSD with M.2 -> SATA reduction e.g. AXAGON RSS-M2SD), SATA III - 6 Gb/s (600 MB/s) interface, max. disk capacity - all without limit. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the SATA interface used (theor. 6 Gbit/s). Compliant with USB Mass Storage Class specification. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol) for faster data transfer in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Connection via USB 3.2 Gen 2 type C female connector. Cable USB type C male / USB type C male 60 cm long and reduction USB type C female / USB type A male included in the package. Adapter dimensions 14 x 72 x 29 mm (H x W x D). Adapter weight 19 g (without cable, without disk, without adapter). Power supply: Power supply via USB bus up to 900mA from one USB port is sufficient for 2.5" HDD/SSD. To power the adapter with a 3.5" drive, a compact external AC/DC adapter 12V - 2A (24W) with a 150 cm long cable is included. AC adapter dimensions 65 x 65 x 40 mm (including fork). Weight of AC adapter 102 g (incl. power cord). Supported OS: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Windows Server 2008 R2 / 2012 / 2016 / 2019 / 2022 / 2025 and later. Package contains: USB-C 10 Gbps - SATA adapter, cable USB-C USB-C 60 cm + USB-C -> USB-A reduction, AC adapter 100-240V / 12V-2A, multilingual guide CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box.

General Specifications Machine Type Mono Laser All-In-One Available Functions Print, Copy, Scan and Fax Print Specifications Print Speed Single sided : Up to 40 ppm (A4) Up to 65.4 ppm(A5-Landscape) Double sided : Up to 33.6 ipm (A4) Printing Method Monochrome laser beam printing Print Resolution Up to 1200 x 1200 dpi Warm-up Time Approx. 14 seconds or less from power on First-Print-Out Time Approx: 5.0 seconds or less Printer Languages UFRII, PCL5e, PCL6, Adobe® PostScript Fonts 45 PCL fonts 136 PostScript fonts Print Margins 5 mm-top, bottom, left and right 10 mm-top, bottom, left and right (Envelope) Toner Saver Mode Yes Advanced Printing Features Encrypted Secure Print Secure Print Print from USB memory key (JPEG/TIFF/PDF) Print from Cloud (Dropbox, GoogleDrive, OneDrive) (PDF/JPEG) Microsoft Universal Print iOS: AirPrint, Canon PRINT app Android; Mopria certified, Canon PRINT app, Canon Print Service Plug-in, IPP everywhere Copy Specifications Copy Speed Single sided (A4): Up to 40 ppm Double sided (A4): Up to 33.6 ipm First-Copy-Out Time Approx. 6.1 seconds or less Copy Resolution Up to 600 x 600 dpi Copy Modes Text, Text/Photo (Default),Text/Photo (High Quality), Photo Double Sided Copying 2-sided to 2-sided (Automatic) Multiple Copies Up to 999 copies Reduction / Enlargement 25-400% in 1% increments Other Features Preset R/E Ratios by Area, Two-Sided, Density Adjustment, Original Type Selection, Two-sided Original, Sort, N on 1, Sharpness, Erase Frame, Copy ID Card, Copy Passport, Color Mode, Reserved copy Scan Specifications Standard Type Colour Scan Resolution Optical: Up to 600 x 600 dpi Enhanced: Up to 9600 x 9600 dpi Scan Speed Single sided mono: 50ipm (300x300dpi) Single sided colour: 40ipm (300x300dpi) Double sided mono: 100ipm (300x300dpi) Double sided colour: 80ipm (300x300dpi) Single sided mono: 40ipm (300x600dpi) Single sided colour: 20ipm (300x600dpi) Double sided mono: 80ipm (300x600dpi) Double sided colour: 40ipm (300x600dpi) Colour Scanning Depth 24 bit/24 bit (input/output) Greyscales 256 levels Compatibility TWAIN , WIA, ICA Maximum Scan Width 216mm Scan to E-mail TIFF/JPEG/PDF/Compact PDF/Searchable PDF / PDF/A-1b Scan to Cloud TIFF/JPEG/PDF/PNG iFAX ITU-T.37 Fax Specifications Modem Speed 33.6 Kbps (Up to 3 seconds/page) Receive Mode Fax only, Fax/Tel Auto Switch, Answer Mode, Manual Fax Resolution Standard: 200 x 100 dpi Fine: 200 x 200 dpi Super fine: 200 x 400 dpi Ultra fine: 400 x 400 dpi Fax Memory Up to 512 pages Speed Dials Up to 281 dials Group Dials/Destinations Max. 299 dials / Max. 299 destinations Sequential Broadcast Max. 310 destinations Memory Backup Permanent fax memory backup (Backup with flash memory) Double Sided Faxing Yes (Transmit and Receive) Other Features Sender's Name (TTI), Direct Send, TX Report, Sequential Broadcasting Media Handling Scanner Type Platen, 2-sided ADF (single pass) Paper Input (Standard) 250-sheet cassette 100-sheet multi-purpose tray 50-sheet ADF Paper Input (Option) 550-sheet cassette (Option) Maximum Paper Input Capacity 900 sheets Paper Output 150-sheet Media Types Plain paper, Recycled paper, Heavy Paper, Thin paper, Label, Post card, Envelope Media Sizes Cassette (Standard and optional): A4, A5, A5 (Landscape), A6, B5, Legal, Letter, Executive, Statement, OFFICIO, B-OFFICIO, M-OFFICIO, GLTR, GLGL, Foolscap, 16K, Custom sizes: Min. 105 x 148 mm Max. 216.0 x 355.6 mm. Multi-purpose tray: A4, A5, A5 (Landscape), A6, B5, Legal, Letter, Executive, Statement, OFFICIO, B-OFFICIO, M-OFFICIO, GLTR, GLGL, Foolscap, 16K, Indexcard, Envelope (COM10, Monarch, C5, DL), Custom sizes: Min 76.2 x 127 mm Max. 216.0 x 355.6 mm. ADF: A4, A5, A6, B5, Legal, Letter, Statement, Custom sizes: Min. 48 x 85.0 mm Max 216 x 355.6 mm Media Weights Cassette (standard and optional): 60 to 120 g/m2 Multi-purpose tray: 60 to 199 g/m2 ADF: 60 to 120 g/m2 Double Sided Printing A4, Legal, Letter, OFFICIO, B-OFFICIO, M-OFFICIO, GLGL, Foolscap Custom size - Min. 210 x 279.4 mm Max. 216.0 x 355.6 mm 60 to 120 g/m2 Interface & Software Interface Type USB 2.0 Hi-Speed, 10BASE-T/100BASE-TX/1000Base-T, Wireless 802.11b/g/n, Wireless Direct Connection Operating System Compatibility Windows® 11 / Windows® 10 / Server® 2025 / Server® 2022 / Server® 2019 / Server® 2016 Mac OS X version 10.15 & up Linux Network Protocol Print: TCP/IP (LPD/Port9100/IPP/IPPS/WSD) Scan: Push Scan: File: FTP (TCP/IP), SMB3.1.1 (TCP/IP) E-mail/I-Fax: SMTP (send), POP3 (receive) Pull Scan: TCP/IP Management: SNMPv1, SNMPv3 (IPv4,IPv6) Security: TLS1.3, IPSec, IP address filtering, IEEE802.1X, SNMPv3, SSL (HTTPS, IPPS) Security (wireless): Infrastructure Mode: WPA-PSK(AES), WPA2-PSK(AES), WPA3-SAE (AES), WPA-EAP(AES), WPA2-EAP(AES), WPA3-EAP(AES) Access Point Mode: WPA2-PSK(AES), WPA3-SAE (AES) Software and Printer Management MF Scan Utility, Remote User Interface (RUI), Department ID Management, Toner Status Tool, iW Enterprise Management Console: Server-based software for centralised management of a fleet of devices Cooperating with External Security Audit System (Security Information and Event Management) eMaintenance: embedded RDS allows remote eMaintenance services such as meter capture, automatic consumables management and remote diagnostics Application Library General Features Recommended Monthly Print Volume 750 - 4,000 pages per month Duty Cycle Max. 80,000 pages per month Processor Speed 1200MHz Memory 1GB Storage 4GB Control Panel 12.7 cm LCD Colour Touch Screen Dimensions with Trays (W x D x H) 420 mm x 460 mm x 375 mm Installation Space (W x D x H) 689 mm x 1,081 mm x 824 mm Weight Approx. 16.3 Kg Power Source 220-240V(±10%) 50/60Hz (±2Hz) Power Consumption Maximum: Approx. 1,280 W Active printing: Approx. 480W Standby: Approx. 8 W Sleep mode: Approx. 0.9 W Typical Electricity Consumption (TEC): 0.32 kWh/week (230V) For detailed information relating to Lot26 regulation, please go to: https://www.canon-europe.com/business/lot26/ Noise Levels Sound Pressure: Active: 53 dB Standby: Inaudible Sound Power: Active: Duplex 68dB / Simplex 67dB Standby: Inaudible Consumables Cartridges Cartridge 070 (3,000 pages) Cartridge 070H (10,200 pages) Accessories & Options Items CST.Feeding Module-AH1 (550-sheet cassette) (Option) TEL 6 Kit Long Cord (Telephone handset) (Option)

General Specifications Machine Type Colour Laser All-In-One Available Functions Print, Copy and Scan Print Specifications Print Speed Single sided: Up to 25 ppm (A4) Up to 45.3 ppm (A5-Landscape) Double sided: Up to 15 ipm (A4) Printing Method Colour laser beam printing Print Resolution Up to 1200 x 1200 dpi Warm-up Time Approx. 13 seconds or less from power on First-Print-Out Time Colour approx.: 10.93 seconds or less Mono approx.: 10.90 seconds or less Printer Languages UFRII, PCL5c, PCL6 Fonts 45 PCL fonts Print Margins 5 mm-top, bottom, left and right 10 mm-top, bottom, left and right (Envelope) Toner Saver Mode Yes Advanced Printing Features Encrypted Secure Print Secure Print Print from USB memory key (JPEG/TIFF/PDF) Print from Cloud (Dropbox, GoogleDrive, OneDrive) (PDF/JPEG) Microsoft Universal Print support iOS: AirPrint, Canon PRINT app Android; Mopria certified, Canon Print Service Plug-in, Canon PRINT app, IPP everywhere Copy Specifications Copy Speed Single sided (A4): Up to 25 ppm Double sided (A4): Up to 15 ipm First-Copy-Out Time ADF (A4): Colour Approx. 10.6 seconds or less Mono Approx. 10.5 seconds or less Platen (A4): Colour Approx. 11.2 seconds or less Mono Approx. 11.0 seconds or less Copy Resolution Up to 600 x 600 dpi Copy Modes Text/Photo/Map (Default),Text/Photo/Map (quality), Printed Image, Text Double Sided Copying 1-sided to 2-sided (Automatic) Multiple Copies Up to 999 copies Reduction / Enlargement 25-400% in 1% increments Other Features Preset R/E Ratios by Area, Two-Sided, Density Adjustment, Original Type Selection, Two-sided Original, Sort, N on 1, Sharpness, Erase Frame, Copy ID Card, Copy Passport, Color Mode, Reserved copy Scan Specifications Standard Type Colour Scan Resolution Optical: Up to 600 x 600 dpi Enhanced: Up to 9600 x 9600 dpi Scan Speed Single sided mono: 50ipm (300x300dpi) Single sided colour: 40ipm (300x300dpi) Single sided mono: 40ipm (300x600dpi) Single sided colour: 20ipm (300x600dpi) Colour Scanning Depth 24 bit/24 bit (input/output) Greyscales 256 levels Compatibility TWAIN , WIA, ICA Maximum Scan Width 216mm Scan to PC Scan to USB Memory Key Scan to FTP TIFF/JPEG/PDF/Compact PDF/Searchable PDF / PDF/A-1b Scan to Cloud TIFF/JPEG/PDF/Compact PDF/Searchable PDF / PDF/A-1b Media Handling Scanner Type Platen, ADF Paper Input (Standard) 250-sheet cassette 1-sheet manual feed slot 50-sheet ADF Maximum Paper Input Capacity 251 sheets Paper Output 100-sheet Media Types Plain paper, Recycled paper, Heavy Paper, Thin paper, Colour paper, Coated paper, Label, Post card, Envelope Media Sizes Cassette: A4, A5, A5 (Landscape), B5, A6, Legal, Letter, Executive, Statement, OFFICIO, B-OFFICIO, M-OFFICIO, GLTR, GLGL, Foolscap, 16K, Post card, Indexcard, Envelop (COM10, DL, C5, Monarch), Custom sizes: Min. 76.2 x 127 mm, Max. 216 x 355.6 mm. Multi-purpose tray: A4, A5, A5 (Landscape), B5, A6, Legal, Letter, Executive, Statement, OFFICIO, B-OFFICIO, M-OFFICIO, GLTR, GLGL, Foolscap, 16K, Post card, Indexcard, Envelope (COM10, DL, C5, Monarch), Custom sizes: Min 76.2 x 127 mm, Max. 216 x 355.6 mm. ADF: A4, A5, A6, B5, Legal, Letter, Statement, Custom sizes: Min. 48 x 85.0 mm, Max. 216.0 x 355.6 mm Media Weights Cassette: 60 to 163 g/m² (Up to 200 g/m² with Coated paper) Multi-purpose tray: 60 to 163 g/m² (Up to 200 g/m² with Coated paper) ADF: 50 to 105 g/m² Double Sided Printing Automatic Cassette: A4, B5, Legal, Letter, Executive, OFFICIO, B-OFFICIO, M-OFFICIO, GLTR, GLGL, Foolscap, 16K Custom size - Min. 182 x 257 mm, Max. 216 x 355.6 mm 60 to 200 g/m² Interface & Software Interface Type USB 2.0 Hi-Speed, 10BASE-T/100BASE-TX/1000Base-T, Wireless 802.11b/g/n, Wireless Direct Connection Operating System Compatibility Windows® 11 / Windows® 10 / Server® 2025 /Server® 2022 / Server® 2019 / Server® 2016 Mac OS X version 10.15 & up Linux Network Protocol Print: TCP/IP (LPD/Port9100/IPP/IPPS/WSD) Scan: Push Scan: File: FTP (TCP/IP), SMB3.1.1 (TCP/IP) E-mail/I-Fax: SMTP (send), POP3 (receive) Pull Scan: TCP/IP Management: SNMPv1, SNMPv3 (IPv4,IPv6) Security: TLS1.3, IPSec, IP address filtering, IEEE802.1X, SNMPv3, SSL (HTTPS, IPPS) Security (wireless): Infrastructure Mode: WPA-PSK(AES), WPA2-PSK(AES), WPA3-SAE (AES), WPA-EAP(AES), WPA2-EAP(AES), WPA3-EAP(AES) Access Point Mode: WPA2-PSK(AES), WPA3-SAE (AES) Software and Printer Management MF Scan Utility, Remote User Interface (RUI), Department ID Management, Toner Status Tool, iW Enterprise Management Console: Server-based software for centralised management of a fleet of devices Cooperating with External Security Audit System (Security Information and Event Management) eMaintenance: embedded RDS allows remote eMaintenance services such as meter capture, automatic consumables management and remote diagnostics. Application Library General Features Recommended Monthly Print Volume 250 - 2,500 pages per month Duty Cycle Max. 30,000 pages per month Processor Speed 1200MHz Memory 1GB Storage 4GB Control Panel 12.7 cm LCD Colour Touch Screen Dimensions with Trays (W x D x H) 425 mm x 461 mm x 397 mm Installation Space (W x D x H) 701 mm x 1,020 mm x 785 mm Weight Approx. 20.8 Kg Power Source 220-240V(±10%) 50/60Hz (±2Hz) Power Consumption Maximum: Approx. 980 W Active printing: Approx. 580 W Standby: Approx. 12.0 W Sleep mode: Approx. 1.0 W Typical Electricity Consumption (TEC): 0.23 kWh/week For detailed information relating to Lot26 regulation, please go to: https://www.canon-europe.com/business/lot26/ Noise Levels Sound Pressure: Active: Simplex 53 dB / Duplex 52 dB Standby: Inaudible Sound Power: Active: Simplex 67 dB or less (BW) / 66 dB or less (CL) Duplex 66 dB or less Standby: Inaudible Consumables Cartridges Cartridge 075 Black (1,400 pages) Cartridge 075H Black (3,500 pages) Cartridge 075 Cyan (1,300 pages) Cartridge 075H Cyan (2,500 pages) Cartridge 075 Magenta (1,300 pages) Cartridge 075H Magenta (2,500 pages) Cartridge 075 Yellow (1,300 pages) Cartridge 075H Yellow (2,500 pages)

Dive into the wonderful world of Pixar with the new edition of this bestselling, fan-favourite, fully illustrated, and fact-filled Disney Pixar character guide book. Now featuring more than 320 characters, this new edition of the popular Disney Pixar Character Encyclopedia for children and adults has been updated and expanded to include characters from Pixar's recent releases. Find out more about the greatest and funniest heroes, villains, sidekicks and oddballs from across every Pixar movie, including 2020's Onward and Soul, as well as 2021's box-office hit Luca and 2022's Turning Red and Lightyear. Whether your favourite character is Buzz, Lightning, or Mater along with these more recent ones: Izzy, Sox, Meilin, Joe, 22, Luca, or Giulia, the Pixar Character Encyclopedia lets you relive their top movie moments and latest adventures, discover special "Did you know?" facts, and much, much more. A comprehensive Disney and Pixar character book: Beautifully illustrated with images from the original movies. Organised in chronological order from Toy Story to Lightyear, including characters from sequels such as Toy Story 4 alongside the original movie. Age-appropriate text for 7-11 year olds and content designed to also delight adult fans ensures this book is a fantastic gift for Disney and Pixar enthusiasts. Looking for more information about the Lightfoots, Luca Paguro, and Buzz Lightyear's latest adventures? This updated edition of the Pixar Character Encyclopedia is the book for you! ©Disney/Pixar 2022 <br><br> Autorid: Shari Last <br>

The publication of the Diagnostic and Statistical Manual Version 5 (DSM-5, 2013) and the more recent Diagnostic and Statistical Manual Version 5 - Text Revision edition (DSM-5-TR, 2022), together ushered in a major change to the field of mental health diagnosis. DSM-5-TR Insanely Simplified provides a summary of key concepts of the new diagnostic schema introduced in DSM-5 as well as the updated DSM-5-TR. It utilizes a variety of techniques to help clinicians master the new spectrum approach to diagnosis and its complex criteria. Cartoons, mnemonic devices, and summary tables allow clinicians and students to quickly grasp and retain broad concepts and subtle nuances related to psychiatric diagnosis. DSM-5-TR Insanely Simplified fosters quick mastery of the most important concepts introduced in DSM-5 and continued in DSM-5-TR, while offering an entirely new way of looking at mental health along a continuum. This new approach goes beyond simply "labeling" clients with various diagnoses, but rather places them along spectrums that range from normal to problematic symptoms. Mental health professionals and laypeople will appreciate the synthesis of deep psychology and modern approaches to the diagnosis of mental illness. Table of ContentsDSM-5-TR Summary Pages Section I: Overview1. Introduction2. History of the DSM 3. What is new in DSM-5-TR 4. What was new in DSM-5 5. The 8 Primary Psychiatric Spectrums of Mental Illness Section II: The 8 Primary Spectrums of Psychiatry 6. The Depression Spectrum: Shallowness vs. Despair 7. The Mania Spectrum: Boring vs. Bipolar 8. The Anxiety Spectrum: Carelessness vs. Anxiousness 9. The Psychosis Spectrum: Visionless vs. Psychotic 10. The Focus Spectrum: Attention Deficit Disorder vs. Obsessive Compulsive Disorders 11. The Substance Abuse Spectrum: Ascetic vs. Addicted 12. The Autism Spectrum: Codependent vs. Autistic 13. The Personality Spectrum: Neurotic vs. Obnoxious Section III: The Secondary Areas of Diagnosis 14. The Specialty Areas (Trauma, Neurodevelopmental, Neurocognitive, Behavioral, Dissociative, Somatic, Eating, Elimination, Sleep, Sexual, Gender, Paraphilia) Section IV: Conclusions 15. The Harmony of the Lotus Flower 16. Carl Jung and his Relationship to DSM-5-TR Appendix: On ICD-10 and the DSM-5-TR Endnotes Index

A study of two exhibitions that took place five years apart in the same building in Brussels city-centre Full House explores two exhibitions that took place five years apart in the same building in Brussels and featured over 300 contemporary art works from the renowned collection of Frédéric de Goldschmidt. The first show, Not Really Really, was organized in 2016 in a building that had only been vacated a few months before by a mental health clinic. The works were mostly sculptures made with everyday objects and played with the ambiguity of what the last occupants could have left and what the artists purposefully created. The building then underwent a long renovation, with photos included illustrating this process. The second show, Inaspettatamente (Unexpectedly), then engaged with themes such as order and disorder, time, classification, the artists process or his/her position in world conflicts using the prism of the famous Arte Povera artist Alighiero Boetti. Curatorial texts and images of the works both in context and in studio allow the reader to discover and appreciate both exhibitions. Distributed for Mercatorfonds Exhibition Schedule: Cloud Seven, Quai du commerce 7 (November 11, 2021January 30, 2022) <br><br> Autorid: Nicolas Bourriaud, Frédéric de Goldschmidt, Christine Jamart, Agata Jastrzabek, Gregory Lang, Donatienne De Sejournet, Dirk Snauwaert <br>

<div lang="et" xml:lang="et"> <table border="2"> <tbody> <tr> <th>Omadus</th> <th>Väärtus</th> </tr> <tr> <td>Printimismeetod</td> <td>Termotransfeer / Otsene termiline</td> </tr> <tr> <td>Eraldusvõime</td> <td>203 dpi (8 punkti/mm)</td> </tr> <tr> <td>Printimiskiirus</td> <td>5 IPS (127 mm/s)**</td> </tr> <tr> <td>Printimislaius</td> <td>4.16" (105.7 mm)</td> </tr> <tr> <td>Printimispikkus</td> <td>Min. 0.16" (4 mm)** Max. 30" (762 mm)</td> </tr> <tr> <td>Protsessor</td> <td>32-bitine RISC CPU</td> </tr> <tr> <td>Mälu</td> <td>8MB Flash (4MB kasutajale); 16MB SDRAM</td> </tr> <tr> <td>Sensori tüüp</td> <td>Reguleeritav reflective (täisulatus). Fikseeritud transmissive</td> </tr> <tr> <td>Meediatüübid</td> <td>Jätkuv vorm, vahega sildid, musta märgi tuvastus, augustatud augud; pikkus auto tuvastuse või programmeerimise järgi</td> </tr> <tr> <td>Meedia laius</td> <td>Min. 1" (25.4 mm) - Max. 4.65" (118 mm)</td> </tr> <tr> <td>Meedia paksus</td> <td>Min. 0.0024" (0.06 mm) – Max. 0.008" (0.2 mm)</td> </tr> <tr> <td>Sildi rulli läbimõõt</td> <td>Max. 5" (127 mm)</td> </tr> <tr> <td>Südamiku läbimõõt</td> <td>1" (25.4 mm), 1.5" (38.1 mm)</td> </tr> <tr> <td>Riboni tüübid</td> <td>Wax, wax / resin, resin</td> </tr> <tr> <td>Riboni pikkus</td> <td>360' (110 m)</td> </tr> <tr> <td>Riboni laius</td> <td>Min. 1.18" (30 mm) - Max. 4.33" (110 mm)</td> </tr> <tr> <td>Riboni rulli läbimõõt</td> <td>1.57" (40 mm)</td> </tr> <tr> <td>Riboni kela läbimõõt</td> <td>0.5" (12.7 mm)</td> </tr> <tr> <td>Printeri keel</td> <td>EZPL, GEPL, GZPL, GDPL (automaatne lülitumine)</td> </tr> <tr> <td>Etikettide disaini tarkvara</td> <td>GoLabel II (ainult EZPL jaoks) (Windows)</td> </tr> <tr> <td>Haldustööriistad</td> <td>GoTools (Windows / Android), GoUtility (Windows)</td> </tr> <tr> <td>Satiinriboni printimise tööriist</td> <td>GoRibbon (Windows)</td> </tr> <tr> <td>Rakendus</td> <td>GoAPP (Android / iOS)</td> </tr> <tr> <td>Draiver</td> <td>Windows 7, 8 & 8.1, 10, 11, Server 2008 R2, 2012, 2012 R2, 2016, 2019, 2022, MAC, Linux</td> </tr> <tr> <td>SDK</td> <td>Win CE, .NET, Windows 7, 8 & 8.1, 10, 11, Android, Mac, iOS</td> </tr> <tr> <td>Püsifondid</td> <td>Bitmap: 6, 8, 10, 12, 14, 18, 24, 30, 16X26, OCR A & B; 0°, 90°, 180°, 270° pööratavad; 8× laiendatavad; TTF: (Bold / Italic / Underline) 0°,90°, 180°, 270° pööratavad</td> </tr> <tr> <td>Laaditavad fondid</td> <td>Bitmap: 0°, 90°, 180°, 270° pööratavad; Aasia: 16x16, 24x24 Traditsiooniline hiina (BIG-5), Lihtsustatud (GB2312), Jaapani (S-JIS), Korea (KS-X1001); 0°, 90°, 180°, 270° pööratavad ja 8× laiendatavad; TTF: (Bold / Italic / Underline) 0°,90°, 180°, 270° pööratavad</td> </tr> <tr> <td>Triipkoodid 1D</td> <td>China Postal Code, Codabar, Code 11, Code 32, Code 39, Code 93, Code 128 (A,B,C), EAN-8/EAN-13 (+2/5), EAN 128, FIM, German Post Code, GS1 DataBar, HIBC, Industrial 2 of 5, Interleaved 2-of-5, ISBT-128, ITF 14, Japanese Postnet, Logmars, MSI, Postnet, Plessey, Planet 11&13, RPS 128, Standard 2 of 5, Telepen, Matrix 2 of 5, UPC-A/UPC-E (+2/5), UCC/EAN-128 K-Mart, Random Weight, Pharmacode</td> </tr> <tr> <td>Triipkoodid 2D</td> <td>Aztec code, Code 49, Codablock F, Datamatrix code, MaxiCode, Micro PDF417, Micro QR code, PDF417, QR code, TLC 39, GS1 Composite, DotCode, Marco PDF 417</td> </tr> <tr> <td>Liidesed</td> <td>USB 2.0 (Type B); RS-232; Ethernet 10/100 Mbps</td> </tr> <tr> <td>Real Time Clock</td> <td>Lisavarustus</td> </tr> <tr> <td>Juhtpaneel</td> <td>Üks kolmvärviline LED: Power (roheline, oranž, punane); Juhtklahv: FEED; Kalibreerimisnupp</td> </tr> <tr> <td>Toide</td> <td>Väline automaatne lülitus; Sisend: AC 100-240V, 50-60Hz; Väljund: DC 24V, 2.5A</td> </tr> <tr> <td>Töö temperatuur</td> <td>5°C kuni 40°C</td> </tr> <tr> <td>Hoiustamise temperatuur</td> <td>-20°C kuni 60°C</td> </tr> <tr> <td>Niiskus töö</td> <td>30-85%, mittekondenseeruv</td> </tr> <tr> <td>Niiskus hoiustamine</td> <td>10-90%, mittekondenseeruv</td> </tr> <tr> <td>Sertifikaadid</td> <td>CE (EMC), FCC Class B, CB, cULus, CCC, BSMI, UKCA, BIS, ENERGY STAR</td> </tr> <tr> <td>Mõõtmed</td> <td>Pikkus: 252 mm (9.92”); Laius: 200 mm (7.87”); Kõrgus: 165 mm (6.50”)</td> </tr> <tr> <td>Kaal</td> <td>1.8 kg (4 lbs), tarvikuteta</td> </tr> <tr> <td>Lisavarustus</td> <td>Lõikuri moodul (Dealer Install); BT (Dealer Install); Wireless LAN (IEEE 802.11 b/g/n) (Dealer Install); WiFi + BT (BLE 5.0) combo (Dealer Install); RTC (Dealer Install); Väline rulli hoidja; Väline rewinder; Left Alignment Printing Mechanism (Factory Install)</td> </tr> <tr> <td>Garantii</td> <td>3-aastane piiratud garantii</td> </tr> </tbody> </table> </div>

<div lang="et" xml:lang="et"> <table border="2"> <tbody> <tr> <th>Omadus</th> <th>Väärtus</th> </tr> <tr> <td>Printimismeetod</td> <td>Termotransfeer / Otsene termiline</td> </tr> <tr> <td>Eraldusvõime</td> <td>203 dpi (8 punkti/mm)</td> </tr> <tr> <td>Printimiskiirus</td> <td>5 IPS (127 mm/s)**</td> </tr> <tr> <td>Printimislaius</td> <td>4.25" (108 mm)</td> </tr> <tr> <td>Printimispikkus</td> <td>Min. 0.16" (4 mm)** Max. 68" (1727 mm)</td> </tr> <tr> <td>Protsessor</td> <td>32-bitine RISC CPU</td> </tr> <tr> <td>Mälu</td> <td>8MB Flash (4MB kasutajale); 16MB SDRAM</td> </tr> <tr> <td>Sensori tüüp</td> <td>Reguleeritav reflective (täisulatus). Fikseeritud transmissive</td> </tr> <tr> <td>Meediatüübid</td> <td>Jätkuv vorm, vahega sildid, musta märgi tuvastus, augustatud augud; pikkus auto tuvastuse või programmeerimise järgi</td> </tr> <tr> <td>Meedia laius</td> <td>Min. 1" (25.4 mm) - Max. 4.65" (118 mm)</td> </tr> <tr> <td>Meedia paksus</td> <td>Min. 0.0024" (0.06 mm) – Max. 0.008" (0.2 mm)</td> </tr> <tr> <td>Sildi rulli läbimõõt</td> <td>Max. 5" (127 mm)</td> </tr> <tr> <td>Südamiku läbimõõt</td> <td>1" (25.4 mm), 1.5" (38.1 mm)</td> </tr> <tr> <td>Riboni tüübid</td> <td>Wax, wax / resin, resin</td> </tr> <tr> <td>Riboni pikkus</td> <td>360' (110 m)</td> </tr> <tr> <td>Riboni laius</td> <td>Min. 1.18" (30 mm) - Max. 4.33" (110 mm)</td> </tr> <tr> <td>Riboni rulli läbimõõt</td> <td>1.57" (40 mm)</td> </tr> <tr> <td>Riboni kela läbimõõt</td> <td>0.5" (12.7 mm)</td> </tr> <tr> <td>Printeri keel</td> <td>EZPL, GEPL, GZPL, GDPL (automaatne lülitumine)</td> </tr> <tr> <td>Etikettide disaini tarkvara</td> <td>GoLabel II (ainult EZPL jaoks) (Windows)</td> </tr> <tr> <td>Haldustööriistad</td> <td>GoTools (Windows / Android), GoUtility (Windows)</td> </tr> <tr> <td>Satiinriboni printimise tööriist</td> <td>GoRibbon (Windows)</td> </tr> <tr> <td>Rakendus</td> <td>GoAPP (Android / iOS)</td> </tr> <tr> <td>Draiver</td> <td>Windows 7, 8 & 8.1, 10, 11, Server 2008 R2, 2012, 2012 R2, 2016, 2019, 2022, MAC, Linux</td> </tr> <tr> <td>SDK</td> <td>Win CE, .NET, Windows 7, 8 & 8.1, 10, 11, Android, Mac, iOS</td> </tr> <tr> <td>Püsifondid</td> <td>Bitmap: 6, 8, 10, 12, 14, 18, 24, 30, 16X26, OCR A & B; 0°, 90°, 180°, 270° pööratavad; 8× laiendatavad; TTF: (Bold / Italic / Underline) 0°,90°, 180°, 270° pööratavad</td> </tr> <tr> <td>Laaditavad fondid</td> <td>Bitmap: 0°, 90°, 180°, 270° pööratavad; Aasia: 16x16, 24x24 Traditsiooniline hiina (BIG-5), Lihtsustatud (GB2312), Jaapani (S-JIS), Korea (KS-X1001); 0°, 90°, 180°, 270° pööratavad ja 8× laiendatavad; TTF: (Bold / Italic / Underline) 0°,90°, 180°, 270° pööratavad</td> </tr> <tr> <td>Triipkoodid 1D</td> <td>China Postal Code, Codabar, Code 11, Code 32, Code 39, Code 93, Code 128 (A,B,C), EAN-8/EAN-13 (+2/5), EAN 128, FIM, German Post Code, GS1 DataBar, HIBC, Industrial 2 of 5, Interleaved 2-of-5, ISBT-128, ITF 14, Japanese Postnet, Logmars, MSI, Postnet, Plessey, Planet 11&13, RPS 128, Standard 2 of 5, Telepen, Matrix 2 of 5, UPC-A/UPC-E (+2/5), UCC/EAN-128 K-Mart, Random Weight, Pharmacode</td> </tr> <tr> <td>Triipkoodid 2D</td> <td>Aztec code, Code 49, Codablock F, Datamatrix code, MaxiCode, Micro PDF417, Micro QR code, PDF417, QR code, TLC 39, GS1 Composite, DotCode, Marco PDF 417</td> </tr> <tr> <td>Liidesed</td> <td>USB 2.0 (Type B); RS-232; Ethernet 10/100 Mbps</td> </tr> <tr> <td>Real Time Clock</td> <td>Lisavarustus</td> </tr> <tr> <td>Juhtpaneel</td> <td>Üks kolmvärviline LED: Power (roheline, oranž, punane); Juhtklahv: FEED; Kalibreerimisnupp</td> </tr> <tr> <td>Toide</td> <td>Väline automaatne lülitus; Sisend: AC 100-240V, 50-60Hz; Väljund: DC 24V, 2.5A</td> </tr> <tr> <td>Töö temperatuur</td> <td>5°C kuni 40°C</td> </tr> <tr> <td>Hoiustamise temperatuur</td> <td>-20°C kuni 60°C</td> </tr> <tr> <td>Niiskus töö</td> <td>30-85%, mittekondenseeruv</td> </tr> <tr> <td>Niiskus hoiustamine</td> <td>10-90%, mittekondenseeruv</td> </tr> <tr> <td>Sertifikaadid</td> <td>CE (EMC), FCC Class B, CB, cULus, CCC, BSMI, UKCA, BIS, ENERGY STAR</td> </tr> <tr> <td>Mõõtmed</td> <td>Pikkus: 252 mm (9.92”); Laius: 200 mm (7.87”); Kõrgus: 165 mm (6.50”)</td> </tr> <tr> <td>Kaal</td> <td>1.8 kg (4 lbs), tarvikuteta</td> </tr> <tr> <td>Lisavarustus</td> <td>Lõikuri moodul (Dealer Install); BT (Dealer Install); Wireless LAN (IEEE 802.11 b/g/n) (Dealer Install); WiFi + BT (BLE 5.0) combo (Dealer Install); RTC (Dealer Install); Väline rulli hoidja; Väline rewinder; Left Alignment Printing Mechanism (Factory Install)</td> </tr> <tr> <td>Garantii</td> <td>3-aastane piiratud garantii</td> </tr> </tbody> </table> </div>

<div lang="et" xml:lang="et"> <table border="2"> <tbody> <tr> <th>Omadus</th> <th>Väärtus</th> </tr> <tr> <td>Printimismeetod</td> <td>Termotransfeer / Otsene termiline</td> </tr> <tr> <td>Eraldusvõime</td> <td>300 dpi (12 punkti/mm)</td> </tr> <tr> <td>Printimiskiirus</td> <td>4 IPS (102 mm/s)**</td> </tr> <tr> <td>Printimislaius</td> <td>4.16" (105.7 mm)</td> </tr> <tr> <td>Printimispikkus</td> <td>Min. 0.16" (4 mm)** Max. 30" (762 mm)</td> </tr> <tr> <td>Protsessor</td> <td>32-bitine RISC CPU</td> </tr> <tr> <td>Mälu</td> <td>8MB Flash (4MB kasutajale); 16MB SDRAM</td> </tr> <tr> <td>Sensori tüüp</td> <td>Reguleeritav reflective (täisulatus). Fikseeritud transmissive</td> </tr> <tr> <td>Meediatüübid</td> <td>Jätkuv vorm, vahega sildid, musta märgi tuvastus, augustatud augud; pikkus auto tuvastuse või programmeerimise järgi</td> </tr> <tr> <td>Meedia laius</td> <td>Min. 1" (25.4 mm) - Max. 4.65" (118 mm)</td> </tr> <tr> <td>Meedia paksus</td> <td>Min. 0.0024" (0.06 mm) – Max. 0.008" (0.2 mm)</td> </tr> <tr> <td>Sildi rulli läbimõõt</td> <td>Max. 5" (127 mm)</td> </tr> <tr> <td>Südamiku läbimõõt</td> <td>1" (25.4 mm), 1.5" (38.1 mm)</td> </tr> <tr> <td>Riboni tüübid</td> <td>Wax, wax / resin, resin</td> </tr> <tr> <td>Riboni pikkus</td> <td>360' (110 m)</td> </tr> <tr> <td>Riboni laius</td> <td>Min. 1.18" (30 mm) - Max. 4.33" (110 mm)</td> </tr> <tr> <td>Riboni rulli läbimõõt</td> <td>1.57" (40 mm)</td> </tr> <tr> <td>Riboni kela läbimõõt</td> <td>0.5" (12.7 mm)</td> </tr> <tr> <td>Printeri keel</td> <td>EZPL, GEPL, GZPL, GDPL (automaatne lülitumine)</td> </tr> <tr> <td>Etikettide disaini tarkvara</td> <td>GoLabel II (ainult EZPL jaoks) (Windows)</td> </tr> <tr> <td>Haldustööriistad</td> <td>GoTools (Windows / Android), GoUtility (Windows)</td> </tr> <tr> <td>Satiinriboni printimise tööriist</td> <td>GoRibbon (Windows)</td> </tr> <tr> <td>Rakendus</td> <td>GoAPP (Android / iOS)</td> </tr> <tr> <td>Draiver</td> <td>Windows 7, 8 & 8.1, 10, 11, Server 2008 R2, 2012, 2012 R2, 2016, 2019, 2022, MAC, Linux</td> </tr> <tr> <td>SDK</td> <td>Win CE, .NET, Windows 7, 8 & 8.1, 10, 11, Android, Mac, iOS</td> </tr> <tr> <td>Püsifondid</td> <td>Bitmap: 6, 8, 10, 12, 14, 18, 24, 30, 16X26, OCR A & B; 0°, 90°, 180°, 270° pööratavad; 8× laiendatavad; TTF: (Bold / Italic / Underline) 0°,90°, 180°, 270° pööratavad</td> </tr> <tr> <td>Laaditavad fondid</td> <td>Bitmap: 0°, 90°, 180°, 270° pööratavad; Aasia: 16x16, 24x24 Traditsiooniline hiina (BIG-5), Lihtsustatud (GB2312), Jaapani (S-JIS), Korea (KS-X1001); 0°, 90°, 180°, 270° pööratavad ja 8× laiendatavad; TTF: (Bold / Italic / Underline) 0°,90°, 180°, 270° pööratavad</td> </tr> <tr> <td>Triipkoodid 1D</td> <td>China Postal Code, Codabar, Code 11, Code 32, Code 39, Code 93, Code 128 (A,B,C), EAN-8/EAN-13 (+2/5), EAN 128, FIM, German Post Code, GS1 DataBar, HIBC, Industrial 2 of 5, Interleaved 2-of-5, ISBT-128, ITF 14, Japanese Postnet, Logmars, MSI, Postnet, Plessey, Planet 11&13, RPS 128, Standard 2 of 5, Telepen, Matrix 2 of 5, UPC-A/UPC-E (+2/5), UCC/EAN-128 K-Mart, Random Weight, Pharmacode</td> </tr> <tr> <td>Triipkoodid 2D</td> <td>Aztec code, Code 49, Codablock F, Datamatrix code, MaxiCode, Micro PDF417, Micro QR code, PDF417, QR code, TLC 39, GS1 Composite, DotCode, Marco PDF 417</td> </tr> <tr> <td>Liidesed</td> <td>USB 2.0 (Type B); RS-232; Ethernet 10/100 Mbps</td> </tr> <tr> <td>Real Time Clock</td> <td>Lisavarustus</td> </tr> <tr> <td>Juhtpaneel</td> <td>Üks kolmvärviline LED: Power (roheline, oranž, punane); Juhtklahv: FEED; Kalibreerimisnupp</td> </tr> <tr> <td>Toide</td> <td>Väline automaatne lülitus; Sisend: AC 100-240V, 50-60Hz; Väljund: DC 24V, 2.5A</td> </tr> <tr> <td>Töö temperatuur</td> <td>5°C kuni 40°C</td> </tr> <tr> <td>Hoiustamise temperatuur</td> <td>-20°C kuni 60°C</td> </tr> <tr> <td>Niiskus töö</td> <td>30-85%, mittekondenseeruv</td> </tr> <tr> <td>Niiskus hoiustamine</td> <td>10-90%, mittekondenseeruv</td> </tr> <tr> <td>Sertifikaadid</td> <td>CE (EMC), FCC Class B, CB, cULus, CCC, BSMI, UKCA, BIS, ENERGY STAR</td> </tr> <tr> <td>Mõõtmed</td> <td>Pikkus: 252 mm (9.92”); Laius: 200 mm (7.87”); Kõrgus: 165 mm (6.50”)</td> </tr> <tr> <td>Kaal</td> <td>1.8 kg (4 lbs), tarvikuteta</td> </tr> <tr> <td>Lisavarustus</td> <td>Lõikuri moodul (Dealer Install); BT (Dealer Install); Wireless LAN (IEEE 802.11 b/g/n) (Dealer Install); WiFi + BT (BLE 5.0) combo (Dealer Install); RTC (Dealer Install); Väline rulli hoidja; Väline rewinder; Left Alignment Printing Mechanism (Factory Install)</td> </tr> <tr> <td>Garantii</td> <td>3-aastane piiratud garantii</td> </tr> </tbody> </table> </div>

<div lang="et" xml:lang="et"> <table border="2"> <tbody> <tr> <th>Omadus</th> <th>Väärtus</th> </tr> <tr> <td>Printimismeetod</td> <td>Termotransfeer / Otsene termiline</td> </tr> <tr> <td>Eraldusvõime</td> <td>203 dpi (8 punkti/mm)</td> </tr> <tr> <td>Printimiskiirus</td> <td>5 IPS (127 mm/s)**</td> </tr> <tr> <td>Printimislaius</td> <td>4.25" (108 mm)</td> </tr> <tr> <td>Printimispikkus</td> <td>Min. 0.16" (4 mm)** Max. 68" (1727 mm)</td> </tr> <tr> <td>Protsessor</td> <td>32-bitine RISC CPU</td> </tr> <tr> <td>Mälu</td> <td>8MB Flash (4MB kasutajale); 16MB SDRAM</td> </tr> <tr> <td>Sensori tüüp</td> <td>Reguleeritav reflective (täisulatus). Fikseeritud transmissive, keskne joondus</td> </tr> <tr> <td>Meediatüübid</td> <td>Jätkuv vorm, vahega sildid, musta märgi tuvastus, augustatud augud; pikkus auto tuvastuse või programmeerimise järgi</td> </tr> <tr> <td>Meedia laius</td> <td>0.79” (20 mm) Min. - 4.65” (118 mm) Max.</td> </tr> <tr> <td>Meedia paksus</td> <td>Min. 0.0024” (0.06 mm) – Max. 0.01” (0.25 mm)</td> </tr> <tr> <td>Sildi rulli läbimõõt</td> <td>Max. 5” (127 mm)</td> </tr> <tr> <td>Südamiku läbimõõt</td> <td>1” (25.4 mm), 1.5” (38.1 mm)</td> </tr> <tr> <td>Riboni tüübid</td> <td>Wax, wax / resin, resin</td> </tr> <tr> <td>Riboni pikkus</td> <td>984’ (300 m)</td> </tr> <tr> <td>Riboni laius</td> <td>Min. 1.18” (30 mm) – Max. 4.33” (110 mm)</td> </tr> <tr> <td>Riboni rulli läbimõõt</td> <td>2.67” (68 mm)</td> </tr> <tr> <td>Riboni kela läbimõõt</td> <td>1” (25.4 mm)</td> </tr> <tr> <td>Printeri keel</td> <td>EZPL, GEPL, GZPL, GDPL (automaatne lülitumine)</td> </tr> <tr> <td>Etikettide disaini tarkvara</td> <td>GoLabel II (ainult EZPL jaoks) (Windows)</td> </tr> <tr> <td>Haldustööriistad</td> <td>GoTools (Windows / Android), GoUtility (Windows)</td> </tr> <tr> <td>Satiinriboni printimise tööriist</td> <td>GoRibbon (Windows)</td> </tr> <tr> <td>Draiver</td> <td>Windows 7, Windows 8 & 8.1, Windows 10, Windows 11, Windows Server 2008 R2, 2012, 2012 R2, 2016, 2019, 2022, MAC, Linux</td> </tr> <tr> <td>SDK</td> <td>Win CE, .NET, Windows 7, Windows 8 & 8.1, Windows 10, Windows 11, Android, Mac, iOS</td> </tr> <tr> <td>Püsifondid</td> <td>Bitmap-fondid: 6, 8, 10, 12, 14, 18, 24, 30, 16X26 ja OCR A & B; 0°, 90°, 180°, 270° pööratavad; 8× laiendatavad horisontaalselt ja vertikaalselt; TTF-fondid: (Bold / Italic / Underline) 0°,90°, 180°, 270° pööratavad</td> </tr> <tr> <td>Laaditavad fondid</td> <td>Bitmap-fondid: 0°, 90°, 180°, 270° pööratavad; Aasia fondid: 16x16, 24x24 Traditsiooniline hiina (BIG-5), Lihtsustatud hiina(GB2312), Jaapani(S-JIS), Korea (KS-X1001); 0°, 90°, 180°, 270° pööratavad ja 8× laiendatavad; TTF-fondid: (Bold / Italic / Underline) 0°,90°, 180°, 270° pööratavad</td> </tr> <tr> <td>Triipkoodid 1D</td> <td>China Postal Code, Codabar, Code 11, Code 32, Code 39, Code 93, Code 128 (A, B, C), EAN-8/EAN-13 (2 & 5 numbriga), EAN 128, FIM, German Post Code, GS1 DataBar, HIBC, Industrial 2 of 5, Interleaved 2-of-5 (I 2 of 5), Interleaved 2-of-5 with Shipping Bearer Bars, ISBT-128, ITF 14, Japanese Postnet, Logmars, MSI, Postnet, Plessey, Planet 11 & 13 digit, RPS 128, Standard 2 of 5, Telepen, Matrix 2 of 5, UPC-A/UPC-E (2 või 5 numbriga), UCC/EAN-128 K-Mart ja Random Weight ja Pharmacode</td> </tr> <tr> <td>Triipkoodid 2D</td> <td>Aztec code, Code 49, Codablock F, Datamatrix code, MaxiCode, Micro PDF417, Micro QR code, PDF417, QR code, TLC 39, GS1 Composite, DotCode, Marco PDF 417</td> </tr> <tr> <td>Liidesed</td> <td>USB 2.0 (Type B); Serial port (RS232); Ethernet 10/100 Mbps</td> </tr> <tr> <td>Juhtpaneel</td> <td>Kaks kahevärvilist LED-i (Ready & Status); Kalibreerimisnupp; Juhtklahv: FEED; Toitenupp</td> </tr> <tr> <td>Real Time Clock</td> <td>Standard</td> </tr> <tr> <td>Toide</td> <td>Väline automaatne lülitus; Sisend: AC 100-240V, 50-60Hz; Väljund: DC 24V, 2.5A</td> </tr> <tr> <td>Töökeskkond temperatuur</td> <td>5°C kuni 40°C</td> </tr> <tr> <td>Hoiustamine temperatuur</td> <td>-20°C kuni 50°C</td> </tr> <tr> <td>Niiskus töö</td> <td>30-85%, mittekondenseeruv</td> </tr> <tr> <td>Niiskus hoiustamine</td> <td>10-90%, mittekondenseeruv</td> </tr> <tr> <td>Sertifikaadid</td> <td>CE(EMC), FCC Class A, CB, cULus, CCC, BIS, UKCA, ICES-003, KC, ENERGY STAR</td> </tr> <tr> <td>Mõõtmed</td> <td>Pikkus 280 mm (11.0”); Laius 215 mm (8.46”); Kõrgus 187 mm (7.36”)</td> </tr> <tr> <td>Kaal</td> <td>2.4 kg (5.29 lbs), tarvikuteta</td> </tr> <tr> <td>Lisavarustus</td> <td>Lõikur; Label Dispenser; Väline rulli hoidja 10” (250 mm); Väline rewinder</td> </tr> <tr> <td>Garantii</td> <td>3-aastane piiratud garantii</td> </tr> </tbody> </table> </div>

Thin USB-C 3.2 Gen 1 (USB 3.0) hub AXAGON HUE-F7C with 30 cm long USB cable fast and easy connects up to seven USB devices to the laptop at the same time. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5 Gb/s. The metal hub body is made of aluminum and provides perfect mechanical protection. The elegant finely structured body surface against fingerprint. Fixed 30 cm long USB-C cable is ideal for mobile devices users. The advantage is a separate USB-A port on the front, which is used to connect larger flash disks, readers and other USB devices. The versatility of this USB hub is also enhanced by the built-in micro USB connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply, for example, even more external drives can be connected to the computer or the number of mobile phones charged can be increased. It can handle the permanent connection of several external drives even without an external power supply to the hub. After connecting the external power supply, it is possible to work with five external disks at the same time. Thanks to the Charging hub function, mobile devices can be charged even without connecting to a computer. An unused charger turns this USB hub into a charging hub for free. The hub will enable charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, reader, keyboard and mouse, to the phone or tablet. Input: • 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector. • Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. • Connecting USB type C male connector on a fixed 30 cm long cable. Outputs: • 7x SuperSpeed USB port, USB-A female connectors. • Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). • The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). Features: • Possibility to connect your device while running thanks to the Hot Plug support. • Full Plug and Play support. • Standby mode support. • High quality shielded cable ensures fast communication speed and minimal unwanted interference. • Blue LED indicates the connection to the computer. • Dimensions 145 x 42 x 15 mm. • Weight 90 g (incl. cable). • USB cable length 30 cm. The hub power mode via USB cable (bus power): • USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. • In this power mode, the USB hub is also able to work with up to 3 magnetic 2.5" external disks simultaneously. • Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 3A at 5V (depending on the capabilities of the computer's USB port). The hub power mode via USB + external USB charger (self power): • Integrated micro USB connector for additional powering the hub. • Any mobile device wall charger (not included) with micro USB connector can be used (recommended output current of the charger min. 2A). • In this power mode, the USB hub is able to work with up to 5 magnetic 2.5" external disks. However, for reliable long-term operation of the hub, we recommend connecting a maximum of 3 magnetic external 2.5" drives at the same time. • Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 5A at 5V (depending on the capabilities of the external wall charger). Independent charging hub mode without connecting to a computer (charging hub): • After turning off the connected computer or without connecting to the computer, the hub works with power via a USB charger as a separate charging USB hub, just plug a standard charger with a micro USB connector into the hub (micro USB input). • Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports, the total charging current (which is divided into ports) reaches up to 3A at 5V (depending on the capabilities of the external power adapter). Supported OS: • MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions. • Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: • SuperSpeed USB hub with fixed 30 cm long USB cable, • multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, • packed in a cardboard box with a hanging hole.

Protsessori klass: AMD Ryzen 7Operatiivmälu (RAM): 16 GBGarantii: 3 aastatArvuti tüüp: Äri;Teaduste, töö ja kodu jaoks;Mängude jaoks;UniversaalsedKõvaketas (HDD): 4 TBKõvaketas (SSD): 250 GB M.2 NVMEOperatsioonisüsteem: Windows 11 Pro Videokaardi mälu: 6 GB GDDR6Protsessori mudel ja number: AMD Ryzen 7 5700X 3.40-4.60GHzOperatiivmälu tüüp: DDR4Videokaart: Nvidia GeForce RTX3050Optiline seade: NODVDKaal: 11 kgToote seisukord: UusMudel: INTOPProtsessori tuumad: 8Vahemälu: 32 MBMaksimaalne operatiivmälu maht: 64 GBOperatiivmälu pesade kogus: 2HDD kiirus: 5400 rpmKõvaketta kontroller: SATA3 (6Gb/s)Videokaart tüüp: Nvidia GeForceIntegreeritud vörgukaart: Gigabit EthernetVörguühenduse kiirus: 10/100/1000 Mbit/sUSB 2.0 liideste arv: 5USB 3.1 Gen 1 liideste arv: 4Liidese tüüp: RJ-45, HDMI, DisplayPort, Audio in/Audio out, MicToiteplokk: 650WArvuti suurus (P*L*K): 42.2*22*48.4Pakendi suurus (P*L*K): 52*47.5*24Case: i3 Neo ARGB White

Karastatud klaas 9H Apple iPad Air 4/5/6/7 2020/2022/2024/2025 10.9/11

Tunne kergust - Sportlik Athlex Air riidest kellarihm Sinu Apple Watchile Kergest, aga kvaliteetsest riidest Vastupidav ja mugav disain Lihtne paigaldada Lihtne ja mugav kella käele panna

Tunne kergust - Sportlik Athlex Air riidest kellarihm Sinu Apple Watchile Kergest, aga kvaliteetsest riidest Vastupidav ja mugav disain Lihtne paigaldada Lihtne ja mugav kella käele panna

Kvaliteetne kummist DuraPro Armor PU kellarihm Sinu Apple Watchile Watch Ultra titaniumi värvi raamiga sama värvi Kergest, aga kvaliteetsest materjalist Vastupidav ja mugav disain Lihtne

Kvaliteetne riidest Spigen Lite Fit kellarihm Sinu Apple Watchile Kergest, aga kvaliteetsest riidest Vastupidav ja mugav disain Lihtne paigaldada Lihtne ja mugav kella käele panna ja ära