Kõik hinnakirjad

Noctua NF-A20 HS-PWM chromax.black Noctua's NF-A20 has received numerous awards and recommendations from international hardware websites and magazines and is considered the reference for high-quality 200mm fans. The HS-PWM (High-Speed-PWM) version offers an attractive, all-black chromax.black design and an increased Speed of 1200rpm. Compared to the regular PWM version with 800rpm, it achieves over 40% higher flow rate and over 90% more static pressure. Award-winning NF-A20 design With dozens of recommendations and awards from the international trade press, the NF-A20 has become a reference in the field of high-quality 200mm fans. Its outstanding efficiency has already convinced tens of thousands of customers all over the world. 154mm, 110x180mm and 170mm hole spacing In order to ensure the widest possible compatibility with today's PC cases, the NF-A20 has three different hole spacings: While the 154x154mm and 110x180mm dimensions allow the replacement of most common 200mm fans, the 170x170mm dimension is used for many 230 and 250mm fans. which can also be replaced by the NF-A20.* Flow Acceleration Channels The impeller of the NF-A20 is equipped with so-called flow acceleration channels on the suction side. By accelerating the air flow in the critical outer regions of the fan blades, vortex shedding on the suction side is reduced, which leads to higher efficiency and lower turbulence-related noise emissions. AAO frame system Noctua's AAO (Advanced Acoustic Optimisation) frames feature integrated vibration buffers as well as a stepped inlet area (Stepped Inlet Design) and an inner surface microstructure, which enable even better performance/noise efficiency. Stepped Inlet Design The stepped inlet area of the Stepped Inlet Design creates more turbulence in the inlet. This facilitates the transition from laminar to turbulent flow, which adheres better to the frame (flow attachment) and thus increases the suction capacity of the fan, especially when the intake area is limited. Inner Surface Microstructures The microstructure in the inner area of the frame (Inner Surface Microstructures) creates a boundary layer through which the tips of the fan blades move. This reduces the flow separation from the suction side of the blade tips, resulting in a significant reduction in the rotational noise and an increase in pressure and airflow efficiency. has. SSO2 storage system The NF-A20 is equipped with the further optimized second generation of Noctua's proven SSO bearing system. With SSO2, the rear magnet is positioned closer to the fan axis for even better stabilization, resulting in further improved precision and durability. metal bearing shell In order to guarantee the greatest possible degree of manufacturing precision, minimal tolerances and excellent long-term stability, the fans in the chromax line use a CNC-milled brass bearing shell. PWM IC with SCD The fan supports fully automatic speed control via PWM and uses Noctua's specially designed NE-FD1 chip. This new PWM IC integrates Noctua's Smooth Commutation Drive (SCD) technology, which minimizes PWM switching noise and makes the fan even quieter at low speeds. 6-year manufacturer's warranty Noctua fans are known for their impeccable quality and outstanding durability. Like all Noctua fans, the NF-A20 has an MTTF specification of over 150,000 hours and comes with a full 6-year manufacturer's warranty. Technical data: Dimensions: 200 x 200 x 30 mm (W x H x D) Material: plastic, black Volume: approx. 10.7 – 31.6 depending on speed Speed: ~500 - ~1200 rpm Delivery volume: approx. 212.3 m³/h Air pressure: 2.07 mmH2O Voltage: 12 V Connector: 4-pin PWM Life expectancy: 150,000 hours Power consumption: 1.92W Manufacturer's warranty: 6 years *As there is no binding industry standard for the size and hole spacing of 200mm, 220mm, 230mm or 250mm fans, please consult Noctua's case compatibility list and carefully check the hole spacing of your case and the available space (the NF-A20 is 30mm deep, whereas some other 200mm fans are only 20mm deep!) to make sure the NF-A20 is compatible with your case. If in doubt, please contact your case manufacturer.

Micro-ATX case with real wood, graphics cards up to 358 mm, CPU coolers up to 166.5 mm in height, ATX power supplies up to 140 mm or SFX power supplies, motherboards up to Micro-ATX The Lian Li x DAN Case B4 Micro-ATX offers extensive hardware support in a compact 21.3-litre format. It is ideal for builds that require little space but don’t want a typical mini-PC solution. A Micro-ATX motherboard, long graphics card, ATX or SFX power supply, and flexible cooling options fit into a case that can be positioned vertically or horizontally. The Wooden Edition combines aluminium mesh panels with a front made of genuine beech wood. Compact SFF format: 21.3 litres volume with Micro-ATX support Lots of room for GPUs: Graphics cards up to 358 mm supported Flexible PSU choice: Dedicated mounts for ATX and SFX power supplies Airflow layout: Two addressable 120 mm fans pre-installed Versatile positioning: Usable horizontally or vertically Lian Li x DAN B4 Micro-ATX Case: 21.3 Litres Volume with Extensive Hardware Support The Lian Li x DAN B4 uses its 21.3-litre volume efficiently. It supports Micro-ATX motherboards, graphics cards up to 358 mm in length, and CPU coolers up to 166.5 mm in height. This makes the case suitable for compact gaming and workstation systems that require more than basic hardware. Note: Although the Noctua NH-D15 G2 is officially listed at 168 mm tall, its actual installed height is 165 mm. Additionally, the fans can be mounted 3 mm lower, ensuring compatibility with the 165 mm setup. ATX or SFX: Power Supply Choice Tailored to Cooling Depending on your cooling configuration, you can install a 140 mm ATX power supply or an SFX power supply. Separate mounts are provided for both options. This allows you to configure the case either for maximum compatibility or for more space dedicated to water cooling. The power input is prepared for various case orientations. The rotatable AC connector simplifies cable management: in horizontal use, it faces outward; in vertical use, excess cable length can be accommodated inside the case. Position vertically or horizontally The B4 can be used vertically or horizontally depending on your workspace and setup. For vertical installation, you can add the separately available Lian Li Vertical AeroDeck. It expands fan capacity and creates a direct airflow path to the graphics card. Cooling in the Lian Li x DAN B4: Flexible Air and Water Cooling Planning 2x 120 mm fans pre-installed Front fan can be used as intake when combined with air coolers Radiator support up to 360 mm with SFX PSU or up to 140 mm with ATX PSU The B4 offers multiple options for air and water cooling. Two 120 mm fans are already installed. Additionally, you can fit 120 mm fans at the bottom and front. The front fan is mounted on a removable bracket and can be oriented as an intake when using an air cooler. Radiator Support Depending on PSU Configuration For water cooling, the available space depends on your power supply choice. With an SFX power supply, you can install a 360 mm radiator. With an ATX power supply, a 140 mm radiator is possible. This allows you to tailor the case for air cooling, compact AiO solutions, or more radiator surface area. White Beech Edition: Mesh, Steel Frame, and Genuine Beech Wood The combination of mesh, steel, and beech wood creates a premium appearance without losing sight of functionality. The B4 m-ATX remains optimised for airflow and the best possible cooling of your hardware in both orientations—whether lying flat or standing on your desk.

Lisaarvuti ventilaator NOCTUA NA-FK1, 1700 PWM, 120 mm

Der NH-L12Sx77 ist eine etwas höhere Variante des preisgekrönten NH-L12S und bietet eine verbesserte Kühlleistung sowie erweiterte Mainboard- und RAM-Kompatibilität. Mit sechs statt vier Heatpipes bietet er zusätzlichen thermischen Spielraum und wird weiterhin standardmäßig so konfiguriert, dass der Lüfter von unten nach oben durch die Kühlrippen bläst. Dies sorgt nicht nur für eine optimale Akustik in Gehäusen mit perforierten Seiten- oder Oberteilen direkt über dem Kühler, sondern hilft auch, die warme Luft aus dem System zu befördern. Durch die größere Bauhöhe konnte der Freiraum für hohe Mainboard-Kühlkörper oder RAM-Module deutlich vergrößert werden. Mit einer Höhe von 77 mm ist der NH-L12Sx77 dennoch kompakt genug, um in beliebte Small Form Factor (SFF/SFX) Gehäuse wie das Fractal Design Terra, Silverstone Milo ML12 oder Louqe Raw S1 zu passen. Ausgestattet mit dem bewährten SecuFirm2 Befestigungssystem und Noctuas preisgekrönter NT-H2 Wärmeleitpaste ist der NH-L12Sx77 die perfekte Wahl für SFF-Builds, die eine hohe Kühlleistung benötigen aber nicht ausreichend Platz für die größeren Kühlermodelle NH-C14S oder NH-D9L bieten.

NOCTUA Kühler NH-D12L LGA1851/1700/1200/115x/AMD

Kühler NOCTUA NH-D15S | 1700, 1200, 11xx, 2066, 2011, AM4, AM5 170 W TDP

NOCTUA Kühler NH-L12s NF-A 12*15 Slim-120mm